[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] I finally got a virtual os up, now a few questions...



Sounds like overkill to me.  You say you're not familiar with Linux, though, so I can understand how this would be a frustrating experience.  As I said in my reply to the original post in this thread, I generally configure the bridges in standard Linux networking config and don't leave it to XEN to do this configuration.  This should work regardless of whether you have DHCP running or not - obviously without DHCP you'll need to set up more than just the IP address of that interface, you need to set a gateway address, DNS servers, etc.  DHCP does all of this automatically, so that could be the source of the problem. 
 
I've also never had a problem with updating either my domUs or my servers - I generally make sure the servers are done during install time and the same with the domUs - I do the SuSE updates at install time.
 
-Nick

>>> On 2008/04/03 at 16:41, "Marquez, Anthony" <amarquez@xxxxxxxxxxxxx> wrote:
I was having similar problems... I did a total rebuild this way and all
is working...

I am using RHEL 5.1
When you build the XEN server DO NOT USE DHCP, assign a manual IP
address and this will give you ability to use XEBR0.

When building your paraviritual server, when asked for the first DHCP
use the DHCP, this will allow you to use an HTTP or FTP for locate the
stage2.img. I went round and round with Red Hat support and the
difference was the first DHCP, I was using manually assigned IP but tech
was using DHCP. I switched and was able to locate the stage2.img and
move on.

Doing the two steps above will allow you to access the Xebr0 and pass
the internet to your PV servers.

I am new to LINUX let alone Xen, but the steps above is working for me.

On a side note, DO NOT update , Xen or PV servers built, until you are
done. I did an update right after building the Xen server and LOST
Xebr0. So, build everything first then update them.

Still learning here so maybe someone else can offer you some better
advice. Just letting you know what worked for me.

Tony

Anthony Marquez
Systems Administrator
Information Technology & Communications
New Mexico Department of Agriculture
MSC 3189 /P.O. Box 30005
Las Cruces, NM 88003-8005
Voice (575) 646-2543/Cell (575) 649-4050
Fax (575) 646-1841

-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of trist007
Sent: Thursday, April 03, 2008 3:56 PM
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] I finally got a virtual os up, now a few
questions...


I wasn't able to get a paravirtual os up.  For some reason, during the
install, after the message no ipv6 routers available, I would get
prompted
for stage2.img file.  It would ask for an ftp server and the path.  I
tried
several of the mirrors that fedora project listed and would still get
the
same problem.  So I finally decided to make a virtual os so that I could
install fedora 8 from my dvd.

Anyhow, I have a system up and running, however lftp and firefox can't
connect to the internet.  I route -n and everything came up normally, i
restarted the /etc/init.d/network restart and it restarted fine, but I
just
don't seem to get any connectivity on firefox and lftp.  What do I need
to
do?
--
View this message in context:
http://www.nabble.com/I-finally-got-a-virtual-os-up%2C-now-a-few-questio
ns...-tp16473871p16473871.html
Sent from the Xen - User mailing list archive at Nabble.com.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users



This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.