|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Embedded-pv-devel] [PATCH v15] This is the ABI for the two halves of a para-virtualized sound driver to communicate with each to other.
On Mon, Dec 05, 2016 at 03:05:29PM +0200, Oleksandr Andrushchenko wrote:
> From: Oleksandr Andrushchenko <Oleksandr_Andrushchenko@xxxxxxxx>
Usually one also puts somethign in the commit description.
When I applied this to me tree I got:
[konrad@char xen]$ git log --oneline HEAD^..
ecc7711 This is the ABI for the two halves of a para-virtualized sound driver
to communicate with each to other.
[konrad@char xen]$
Also, thank you for the including the pahole output!
>
> Signed-off-by: Oleksandr Andrushchenko <Oleksandr_Andrushchenko@xxxxxxxx>
> Signed-off-by: Oleksandr Grytsov <Oleksandr_Grytsov@xxxxxxxx>
> Signed-off-by: Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx>
> Signed-off-by: Iurii Konovalenko <iurii.konovalenko@xxxxxxxxxxxxxxx>
>
> ---
> Changes since v1:
> * removed __attribute__((__packed__)) from all structures definitions
>
> Changes since v2:
> * removed all C structures
> * added protocol description between frontend and backend drivers
>
> Changes since v3:
> * fixed some typos
> * renamed XENSND_PCM_FORMAT_FLOAT_** to XENSND_PCM_FORMAT_F32_**
> * renamed XENSND_PCM_FORMAT_FLOAT64_** to XENSND_PCM_FORMAT_F64_**
> * added 'id' field to the request and response packets
> * renamed 'stream_id' to 'stream' in the packets description
> * renamed 'pcm_data_rate' to 'pcm_rate' in the packets description
> * renamed 'pcm_stream_type' to 'pcm_type' in the packets description
> * removed 'stream_id' field from the response packets
>
> Changes since v4:
> * renamed 'stream_id' back to the to 'stream' in the packets description
> * moved 'id' field to the upper position in the response packets
>
> Changes since v5:
> * Slightly reworked request/response packets
> * Size of the request/response packet is changed to the 64 bytes
> * Now parameters for the XENSND_OP_SET_VOLUME/XENSND_OP_GET_VOLUME are
> passed via shared page
> * Added parameters for the XenBus nodes (now each stream can be mapped
> to the defined sound device in the backend using those parameters)
> * Added XenBus state diagrams description
>
> Changes since v6:
> * Reworked streams description in the Backend XenBus Nodes
>
> Changes since v7:
> * re-worked backend device parameters to be more generic and flexible
> * extended frontend device parameters
> * slightly updated state machine description added mute/unmute commands
> * added constants for XenStore configuration strings
> (fields, PCM formats etc.)
> * changed request/response structure size from 64 octets to 16
> * introduced dynamic buffer allocation instead of
> static XENSND_MAX_PAGES_PER_REQUEST
> * re-worked open request to allow dynamic buffer allocation
> * re-worked read/write/volume requests, so they don't pass grefs:
> buffer from the open request is used for these operations to pass data
> * specified type of the volume value to be a signed value in steps
> of 0.001 dBm, while 0 being 0dBm.
> * added Linux include file with structure definitions
>
> Changes since v8:
> * changed frontend-id to frontend_id
> * single sound card support, configured with bunch of
> devices/streams
> * clarifucation made on sample rates and formats expressed as
> decimals w/o any particular ordering
> * put description of migration/disconnection state
> * replaced __attribute__((packed)) to __packed
> * changed padding of ring structures to 64 to fit cache line
> * removeed #ifdef __KERNEL
> * explicitly stated which indices in XenStore configuration
> are contiguous
> * added description to what frontend's defaults are
> * made names of virtual card/devices optional
> * removed PCM_FORMAT_SPECIAL
> * changed volume units from dBm to dB
>
> Changes since v9:
> * removed sndif_linux.h
> * moved all structures from sndif_linux.h to sndif.h
> * structures padded where needed
> * fixed Hz comment
>
> Changes since v10:
> * fixed tabs to 4 spaces to comply with Xen coding style
> * added placeholders to empty structures (C89 concern)
> * added missing header includes
>
> Changes since v11:
> * added XENSND_RSP_NOTSUPP error code
> * changed gref[0] to gref[1] with comment
> * modified comments on empty structures
> * removed "__" from member names
> * fixed indentation
> * added padding in union xensnd_resp
> * changed __XEN_PUBLIC_IO_XENSND_H__ to __XEN_PUBLIC_IO_SNDIF_H__
>
> Changes since v12:
> * changed indentation for defines
> * missed ";" after gref[1]
> * documentation changes
> * changed req/resp structures
> * changed xensnd_page_directory structure
> * pass buffer size in open request
>
> Changes since v13:
> * note on usage of grant ref 0
> * all page sizes are XEN_PAGE_SIZE
> * padding/reserved cleanup/fixes
> * removed empty structures
>
> Changes since v14:
> * turn padding into reserved
> ---
> ---
> xen/include/public/io/sndif.h | 671
> ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 671 insertions(+)
> create mode 100644 xen/include/public/io/sndif.h
>
> diff --git a/xen/include/public/io/sndif.h b/xen/include/public/io/sndif.h
> new file mode 100644
> index 0000000..60a6d88
> --- /dev/null
> +++ b/xen/include/public/io/sndif.h
> @@ -0,0 +1,671 @@
> +/******************************************************************************
> + * sndif.h
> + *
> + * Unified sound-device I/O interface for Xen guest OSes.
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> copy
> + * of this software and associated documentation files (the "Software"), to
> + * deal in the Software without restriction, including without limitation the
> + * rights to use, copy, modify, merge, publish, distribute, sublicense,
> and/or
> + * sell copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> THE
> + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
> + * DEALINGS IN THE SOFTWARE.
> + *
> + * Copyright (C) 2013-2015 GlobalLogic Inc.
> + * Copyright (C) 2016 EPAM Systems Inc.
> + *
> + * Authors: Oleksandr Andrushchenko <Oleksandr_Andrushchenko@xxxxxxxx>
> + * Oleksandr Grytsov <Oleksandr_Grytsov@xxxxxxxx>
> + * Oleksandr Dmytryshyn <oleksandr.dmytryshyn@xxxxxxxxxxxxxxx>
> + * Iurii Konovalenko <iurii.konovalenko@xxxxxxxxxxxxxxx>
> + */
> +
> +#ifndef __XEN_PUBLIC_IO_SNDIF_H__
> +#define __XEN_PUBLIC_IO_SNDIF_H__
> +
> +#include "ring.h"
> +#include "../grant_table.h"
> +
> +/*
> + * Front->back notifications: When enqueuing a new request, sending a
> + * notification can be made conditional on req_event (i.e., the generic
> + * hold-off mechanism provided by the ring macros). Backends must set
> + * req_event appropriately (e.g., using RING_FINAL_CHECK_FOR_REQUESTS()).
> + *
> + * Back->front notifications: When enqueuing a new response, sending a
> + * notification can be made conditional on rsp_event (i.e., the generic
> + * hold-off mechanism provided by the ring macros). Frontends must set
> + * rsp_event appropriately (e.g., using RING_FINAL_CHECK_FOR_RESPONSES()).
> + */
> +
> +/*
> + * Feature and Parameter Negotiation
> + * =================================
> + * The two halves of a Para-virtual sound card driver utilize nodes within
> the
> + * XenStore to communicate capabilities and to negotiate operating
> parameters.
> + * This section enumerates these nodes which reside in the respective front
> and
> + * backend portions of the XenStore, following the XenBus convention.
> + *
> + * All data in the XenStore is stored as strings. Nodes specifying numeric
> + * values are encoded in decimal. Integer value ranges listed below are
> + * expressed as fixed sized integer types capable of storing the conversion
> + * of a properly formated node string, without loss of information.
> + *
> +
> *****************************************************************************
> + * Backend XenBus Nodes
> +
> *****************************************************************************
> + *
> + *-------------------------------- Addressing
> ---------------------------------
> + *
> + * Indices used to address frontends, driver instances, cards,
> + * devices and streams.
> + *
> + * frontend_id
The rest of the drivers use - instead of _.
Is there a particular reason you need to have _ ?
See vscsiif.h and console and vkbd. Actually the last ones
don't mention it in the header but the libxl constructs these.
> + * Values: <uint>
uint32_t
> + *
> + * Domain ID of the sound frontend.
> + *
> + * drv_idx
Again, can this be - ?
> + * Values: <uint>
uint32_t
> + *
> + * Zero based contiguous index of the virtualized sound driver instance
> in
> + * this domain. Multiple PV drivers are allowed in the domain
> + * at the same time.
This is not needed.
We already have this information in the XenStore directory:
/local/domain/0/backend/vsnd/2/0/frontend-id = 2
/local/domain/0/backend/vsnd/2/1/frontend-id = 2
..
/local/domain/0/backend/vsnd/2/N/frontend-id = 2
(which would be similar to what 'vbd', 'console' and 'vif' do).
> + *
> + * dev_id
s/_/-/
> + * Values: <uint>
uint_32t
> + *
> + * Unique device ID.
> + * Doesn't have to be zero based and/or to be contiguous.
Is uint enough? Or would it be better to have an <string> if this is
some form of SHA-1 value?
> + *
> + * stream_idx
s/_/-/
> + * Values: <uint>
uint_32t
[edit, based on the struct xensnd_req this has to be uint_8t] ?
> + *
> + * Zero based contiguous index of the stream of the device.
> + *
> + * Example for the frontend running in domain 5, instance of the driver
> + * in the front is 0 (single or first PV driver), device id 2,
> + * first stream (0):
> + * /local/domain/<frontend_id>/device/vsnd/<drv_idx>/
> + * device/<dev_id>/stream/<stream_idx>/type = "p"
> + * /local/domain/5/device/vsnd/0/device/2/stream/0/type = "p"
Why do you need 'device' ?
Could not this be:
/local/domain/5/device/vsnd/0/2/stream/0/type = "p" ?
> + *
> + *------------------------------- PCM settings
> --------------------------------
> + *
> + * Every virtualized sound frontend has set of devices and streams, each
frontend or backend?
I would think backend since this is still the backend section?
> + * is individually configured. Part of the PCM configuration can be defined
> at
> + * higher level and be fully or partially re-used by the underlying layers.
> + * These configuration values are:
> + * o number of channels (min/max)
> + * o supported sample rates
> + * o supported sample formats.
> + * E.g. one can define these values for the whole driver, device or stream.
> + * Every underlying layer in turn can re-define some or all of them to better
> + * fit its needs. For example, driver may define number of channels to be
> + * in [1; 8] range, and some particular stream may be limited to [1; 2] only.
> + * The rule is that the underlying layer must be a subset of the upper layer
> + * range.
OK, so these are more of 'global ones'?
> + *
> + * Note: if any of the values are not defined then PV driver should use
> + * its default values instead.
How is that suppose to work? What if the PV driver by default wants
to use say 314156 channels and the backend does not expose any? Can
it use that? I presume it could try.. and it would fail but that
hardly seems nice.
> + *
> + * channels-min
> + * Values: <uint>
uint32_t
> + *
> + * The minimum amount of channels that is supported.
> + * Must be at least 1. If not defined then use frontend's default.
This is odd. This whole section is for the backend, so how can the backend
not have this defined?
Do you mean to say that this parameter is optional? Perhaps
then say right before 'The minimum' include '(optional)'
Anyhow where do you envision this optional global value to be?
/local/domain/0/backend/vsnd/5/channels-[min|max] ?
Perhaps mention that in the start of this section:
These global values are under the backend 'vsnd' directory, as
so:
/local/domain/0/backends/vsnd/<front-id>/channels-[min|max]
Thought I think there is probably a better way to
say this..
> + *
> + * channels-max
> + * Values: <uint>
uint32_t
> + *
> + * The maximum amount of channels that is supported.
> + * Must be at least <channels-min>. If not defined then use frontend's
> + * default.
I am still having trouble understanding how the backend is suppose
to use the frontend's default.
Perhaps you want to say:
If this value is not exposed by the backend the frontend
is permitted to use its default values.
?
> + *
> + * sample-rates
> + * Values: <list of uints>
.. of uint32_t
> + *
> + * List of supported sample rates separated by XENSND_LIST_SEPARATOR.
> + * If not defined then use frontend's default. Sample rates are
> expressed
Ahain this 'If not defined then use fronten'ds default' could be written
a bit differently.
> + * as a list of decimal values w/o any ordering requirement.
> + *
> + * sample-formats
> + * Values: <list of XENSND_PCM_FORMAT_XXX_STR>
> + *
> + * List of supported sample formats separated by XENSND_LIST_SEPARATOR.
> + * If not defined then use frontend's default.
Again, this does not sound right. The backend has no clue what
the frontend defaults are.
> + *
> + * buffer-size
> + * Values: <uint>
uint32_t
> + *
> + * The maximum size in octets of the buffer to allocate per stream.
> + *
> + * Example configuration:
> + *
> + * Driver configuration used by all streams:
> + * /local/domain/5/device/vsnd/0/sample-formats = "s8;u8;s16_le;s16_be"
Huh? But this is a backend value? Don't you mean:
/local/domain/0/backend/vsnd/5/sample-formats = "s8;u8;s16_le;s16_be"
?
> + * Stream overrides sample rates supported:
-EPARSE
> + * /local/domain/5/device/vsnd/0/device/2/stream/0/sample-rates =
> + * "8000;22050;44100;48000"
/local/domain/0/backend/vsnd/5/2/stream/0/sample-rates ="8000;22050;44100;48000"
But that is wrong as this section is about global values so they
would be more like:
/local/domain/0/backend/vsnd/5/sample-rates ="8000;22050;44100;48000"
?
> + *
> + *----------------------- Virtual sound card settings
> --------------------------
> + * short-name
> + * Values: <char[32]>
> + *
> + * Short name of the virtual sound card. Optional.
> + *
> + * long-name
> + * Values: <char[80]>
> + *
> + * Long name of the virtual sound card. Optional.
> + *
> + * For example,
> + * /local/domain/5/device/vsnd/0/short-name = "Virtual audio"
> + * /local/domain/5/device/vsnd/0/long-name =
> + * "Virtual audio at center stack"
This should be inverted. That is this is on the backend
side:
/local/domain/0/backend/vsnd/5/0/2/short-name = "Virtual audio"
And so on.
Also how come your example is missing the device part?
Wait, why do you have an an device below but ... not here?
Why not group them together?
That is why not have 'short-name' ,'long-name' and 'name' in
the same directory?
> + *
> + *----------------------------- Device settings
> --------------------------------
> + * name
> + * Values: <char[80]>
> + *
> + * Name of the sound device within the virtual sound card. Optional.
> + *
> + * For example,
> + * /local/domain/5/device/vsnd/0/device/0/name = "General analog"
The example you used at start had a device value of 2. It may
be better to use that here, so :
/local/domain/0/backend/vsnd/5/2/name = "General analog"
> + *
> + *----------------------------- Stream settings
> -------------------------------
> + *
> + * type
> + * Values: "p", "c"
> + *
> + * Stream type: "p" - playback stream, "c" - capture stream
> + *
> + * If both capture and playback are needed then two streams need to be
> + * defined under the same device. For example,
> + * /local/domain/5/device/vsnd/0/device/0/stream/0/type = "p"
> + * /local/domain/5/device/vsnd/0/device/0/stream/1/type = "c"
OK, but again:
/local/domain/0/backend/vsnd/5/2/0/stream/0/type = "p"
/local/domain/0/backend/vsnd/5/2/0/stream/1/type = "c"
Do you want also an 'feature-version' to identify what version
the backend exposes?
> + *
> +
> *****************************************************************************
> + * Frontend XenBus Nodes
> +
> *****************************************************************************
> + *
> + *----------------------- Request Transport Parameters
> -----------------------
> + *
> + * These are per stream.
.. which means they are also per device right?
So one can have something like this:
/local/domain/5/device/vsnd/2/stream/0/event-channel
/local/domain/5/device/vsnd/0/stream/0/event-channel
/local/domain/5/device/vsnd/2/stream/1/event-channel
/local/domain/5/device/vsnd/0/stream/0/event-channel
> + *
> + * event-channel
> + * Values: <uint>
uint32_t
> + *
> + * The identifier of the Xen event channel used to signal activity
> + * in the ring buffer.
> + *
> + * ring-ref
> + * Values: <uint>
uint32_t
> + *
> + * The Xen grant reference granting permission for the backend to map
> + * a sole page in a single page sized ring buffer.
> + *
> + * index
Why not 'unique-id' ?
> + * Values: <uint>
uint32_t
> + *
> + * After stream initialization it is assigned a unique ID (within the
> front
> + * driver), so every stream of the frontend can be identified by the
> + * backend by this ID. This is not equal to stream_idx as the later is
s/stream_idx/steam-idx/
> + * zero based within a device, but this index is contiguous within the
contingous
> + * driver.
> + */
> +
> +/*
> + * STATE DIAGRAMS
> + *
> +
> *****************************************************************************
> + * Startup
> *
> +
> *****************************************************************************
> + *
> + * Tool stack creates front and back state nodes with initial state
> + * XenbusStateInitialising.
> + * Tool stack creates and sets up frontend sound configuration nodes per
> domain.
> + *
> + * Front Back
> + * ================================= =====================================
> + * XenbusStateInitialising XenbusStateInitialising
> + * o Query backend device
> identification
> + * data.
> + * o Open and validate backend device.
> + * |
> + * |
> + * V
> + * XenbusStateInitWait
> + *
> + * o Query frontend configuration
> + * o Allocate and initialize
> + * event channels per configured
> + * playback/capture stream.
> + * o Publish transport parameters
> + * that will be in effect during
> + * this connection.
> + * |
> + * |
> + * V
> + * XenbusStateInitialised
> + *
> + * o Query frontend transport
> parameters.
> + * o Connect to the event channels.
> + * |
> + * |
> + * V
> + * XenbusStateConnected
> + *
> + * o Create and initialize OS
> + * virtual sound device instances
> + * as per configuration.
> + * |
> + * |
> + * V
> + * XenbusStateConnected
> + *
> + * XenbusStateUnknown
> + * XenbusStateClosed
> + * XenbusStateClosing
> + * o Remove virtual sound device
> + * o Remove event channels
> + * |
> + * |
> + * V
> + * XenbusStateClosed
> + *
> + */
> +
> +/*
> + * PCM FORMATS
> + *
> + * XENSND_PCM_FORMAT_<format>[_<endian>]
> + *
> + * format: <S/U/F><bits> or <name>
> + * S - signed, U - unsigned, F - float
> + * bits - 8, 16, 24, 32
> + * name - MU_LAW, GSM, etc.
> + *
> + * endian: <LE/BE>, may be absent
> + * LE - Little endian, BE - Big endian
> + */
> +#define XENSND_PCM_FORMAT_S8 0
> +#define XENSND_PCM_FORMAT_U8 1
> +#define XENSND_PCM_FORMAT_S16_LE 2
> +#define XENSND_PCM_FORMAT_S16_BE 3
> +#define XENSND_PCM_FORMAT_U16_LE 4
> +#define XENSND_PCM_FORMAT_U16_BE 5
> +#define XENSND_PCM_FORMAT_S24_LE 6
> +#define XENSND_PCM_FORMAT_S24_BE 7
> +#define XENSND_PCM_FORMAT_U24_LE 8
> +#define XENSND_PCM_FORMAT_U24_BE 9
> +#define XENSND_PCM_FORMAT_S32_LE 10
> +#define XENSND_PCM_FORMAT_S32_BE 11
> +#define XENSND_PCM_FORMAT_U32_LE 12
> +#define XENSND_PCM_FORMAT_U32_BE 13
> +#define XENSND_PCM_FORMAT_F32_LE 14 /* 4-byte float, IEEE-754 32-bit,
> */
> +#define XENSND_PCM_FORMAT_F32_BE 15 /* range -1.0 to 1.0
> */
> +#define XENSND_PCM_FORMAT_F64_LE 16 /* 8-byte float, IEEE-754 64-bit,
> */
> +#define XENSND_PCM_FORMAT_F64_BE 17 /* range -1.0 to 1.0
> */
> +#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE 18
> +#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE 19
> +#define XENSND_PCM_FORMAT_MU_LAW 20
> +#define XENSND_PCM_FORMAT_A_LAW 21
> +#define XENSND_PCM_FORMAT_IMA_ADPCM 22
> +#define XENSND_PCM_FORMAT_MPEG 23
> +#define XENSND_PCM_FORMAT_GSM 24
> +
> +/*
> + * REQUEST CODES.
> + */
> +#define XENSND_OP_OPEN 0
> +#define XENSND_OP_CLOSE 1
> +#define XENSND_OP_READ 2
> +#define XENSND_OP_WRITE 3
> +#define XENSND_OP_SET_VOLUME 4
> +#define XENSND_OP_GET_VOLUME 5
> +#define XENSND_OP_MUTE 6
> +#define XENSND_OP_UNMUTE 7
> +
> +/*
> + * XENSTORE FIELD AND PATH NAME STRINGS, HELPERS.
> + */
> +#define XENSND_DRIVER_NAME "vsnd"
> +
> +#define XENSND_LIST_SEPARATOR ";"
> +/* Path entries */
> +#define XENSND_PATH_DEVICE "device"
> +#define XENSND_PATH_STREAM "stream"
> +/* Field names */
> +#define XENSND_FIELD_VCARD_SHORT_NAME "short-name"
> +#define XENSND_FIELD_VCARD_LONG_NAME "long-name"
> +#define XENSND_FIELD_RING_REF "ring-ref"
> +#define XENSND_FIELD_EVT_CHNL "event-channel"
> +#define XENSND_FIELD_DEVICE_NAME "name"
> +#define XENSND_FIELD_TYPE "type"
> +#define XENSND_FIELD_STREAM_INDEX "index"
> +#define XENSND_FIELD_CHANNELS_MIN "channels-min"
> +#define XENSND_FIELD_CHANNELS_MAX "channels-max"
> +#define XENSND_FIELD_SAMPLE_RATES "sample-rates"
> +#define XENSND_FIELD_SAMPLE_FORMATS "sample-formats"
> +#define XENSND_FIELD_BUFFER_SIZE "buffer-size"
> +
> +/* Stream type field values. */
> +#define XENSND_STREAM_TYPE_PLAYBACK "p"
> +#define XENSND_STREAM_TYPE_CAPTURE "c"
> +/* Sample rate max string length */
> +#define XENSND_SAMPLE_RATE_MAX_LEN 6
Hm, but it is uint32_t which can be much much higher than 6.
4294967295
11 characters?
> +/* Sample format field values */
> +#define XENSND_SAMPLE_FORMAT_MAX_LEN 24
You sure? You may want to make that clear in 'sample-format'
section that the maximum of a string can be 24 characters.
And also explain why 24 characters.
> +
> +#define XENSND_PCM_FORMAT_S8_STR "s8"
> +#define XENSND_PCM_FORMAT_U8_STR "u8"
> +#define XENSND_PCM_FORMAT_S16_LE_STR "s16_le"
> +#define XENSND_PCM_FORMAT_S16_BE_STR "s16_be"
> +#define XENSND_PCM_FORMAT_U16_LE_STR "u16_le"
> +#define XENSND_PCM_FORMAT_U16_BE_STR "u16_be"
> +#define XENSND_PCM_FORMAT_S24_LE_STR "s24_le"
> +#define XENSND_PCM_FORMAT_S24_BE_STR "s24_be"
> +#define XENSND_PCM_FORMAT_U24_LE_STR "u24_le"
> +#define XENSND_PCM_FORMAT_U24_BE_STR "u24_be"
> +#define XENSND_PCM_FORMAT_S32_LE_STR "s32_le"
> +#define XENSND_PCM_FORMAT_S32_BE_STR "s32_be"
> +#define XENSND_PCM_FORMAT_U32_LE_STR "u32_le"
> +#define XENSND_PCM_FORMAT_U32_BE_STR "u32_be"
> +#define XENSND_PCM_FORMAT_F32_LE_STR "float_le"
> +#define XENSND_PCM_FORMAT_F32_BE_STR "float_be"
> +#define XENSND_PCM_FORMAT_F64_LE_STR "float64_le"
> +#define XENSND_PCM_FORMAT_F64_BE_STR "float64_be"
> +#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_LE_STR "iec958_subframe_le"
> +#define XENSND_PCM_FORMAT_IEC958_SUBFRAME_BE_STR "iec958_subframe_be"
> +#define XENSND_PCM_FORMAT_MU_LAW_STR "mu_law"
> +#define XENSND_PCM_FORMAT_A_LAW_STR "a_law"
> +#define XENSND_PCM_FORMAT_IMA_ADPCM_STR "ima_adpcm"
> +#define XENSND_PCM_FORMAT_MPEG_STR "mpeg"
> +#define XENSND_PCM_FORMAT_GSM_STR "gsm"
> +
> +/*
> + * STATUS RETURN CODES.
> + */
> +/* Operation not supported. */
> +#define XENSND_RSP_NOTSUPP (-2)
> +/* Operation failed for some unspecified reason (e. g. -EIO). */
Is that the -EIO going to be exposed somewhere? Inside of the
'struct xensnd_resp' ?
Would it make sense to have it exposed there? Is that what 'status'
is for?
Why not have an 'err' and mandate that it use POSIX return values?
> +#define XENSND_RSP_ERROR (-1)
> +/* Operation completed successfully. */
> +#define XENSND_RSP_OKAY 0
> +
> +/*
> + * Assumptions:
> + * o usage of grant reference 0 as invalid grant reference:
> + * grant reference 0 is valid, but never exposed to a PV driver,
> + * because of the fact it is already in use/reserved by the PV console.
> + * o all references in this document to page sizes must be treated
> + * as pages of size XEN_PAGE_SIZE unless otherwise noted.
^- extra space
> + *
> + * Description of the protocol between frontend and backend driver.
Is this suppose to have an:
-----------------------------------------
underneath it?
> + *
> + * The two halves of a Para-virtual sound driver communicate with
> + * each other using a shared page and an event channel.
shared pages and event channels?
Since it looks like you can have
/local/domain/<frontend-id>/device/vsnd/<device-id>/stream/<stream-id>/event-channel
And you can have N device-id and M stream-id ?
> + * Shared page contains a ring with request/response packets.
> + *
> + * All reserved fields in the structures below must be 0.
> + *
> + * All request packets have the same length (32 octets)
Which implies you can have at maximum 64 requests?
[64 bytes for the four RING_IDX along with the 48 of padding, that
means 4032 left, but since we need this to be modulo 2 the best
we can do is 2^6.
> + * All request packets have common header:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | operation | stream_idx |
Why the stream_idx ? Your 'ring-ref' is rooted from the '<stream-idx>' so
the frontend and backend already know this.
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * id - uint16_t, private guest value, echoed in response
> + * operation - uint8_t, operation code
> + * stream_idx - uint8_t, index of the stream ("streams_idx" XenStore entry
> + * of the stream)
Why do you need this duplicate information?
> + *
> + *
> + * Request open - open a PCM stream for playback or capture:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | XENSND_OP_OPEN | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | pcm_rate |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | pcm_format | pcm_channels | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | buffer_sz |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | gref_directory_start |
Perhaps 'gref_list' ?
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * pcm_rate - uint32_t, stream data rate, Hz
> + * pcm_format - uint8_t, XENSND_PCM_FORMAT_XXX value
> + * pcm_channels - uint8_t, number of channels of this stream
.. And I presume this should be between 'channels-min' and 'channels-max'?
Is it OK to have to say 255 ? What are the boundary values?
> + * buffer_sz - uint32_t, buffer size to be allocated in octets
Is there an maximum? Or a minimum?
Why have it in bytes? Why not in the amount of grants you need?
Perhaps call it 'gref_nr' ? That way your computation on how
many grants you need is well simplified.
> + * gref_directory_start - grant_ref_t, a reference to the first shared page
s/gref_directory_start/gref_list/ ?
> + * describing shared buffer references. At least one page exists. If shared
> + * buffer size exceeds what can be addressed by this single page, then
s/shared buffer size/buffer_sz/ ?
> + * reference to the next page must be supplied (see gref_dir_next_page
> below)
Now what if grefs_nr (or buffer_sz) is say 1 page (4096).
Does that mean that gref_directory_start still needs to point to page
which only has two entries: 0, <grant ref> ?
Or can it be simplified and this gref_directory_start would be used for
data instead?
I think that is what you saying ("If shared .. " which would imply
that if "if !shared" then something else can be done?) but the start
says: "a reference to the first shared page describind shared buffer
references" which implies you do
need this extra indirect page even if the buffer_sz is say 4096.
?
> + */
> +
> +struct xensnd_open_req {
s/_open_req/_req_open/
> + uint32_t pcm_rate; /* in Hz */
> + uint8_t pcm_format;
> + uint8_t pcm_channels;
> + uint16_t reserved;
> + uint32_t buffer_sz;
> + grant_ref_t gref_directory_start;
> +};
> +
> +/*
> + * Shared page for XENSND_OP_OPEN buffer descriptor (gref_directory in the
> + * request) employs a list of pages, describing all pages of the shared
> data
> + * buffer:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | gref_dir_next_page |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | gref[0] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | gref[i] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | gref[N -1] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * gref_dir_next_page - grant_ref_t, reference to the next page describing
> + * page directory. Must be 0 if no more pages in the list.
s/no more page/there are no more/
> + * gref[i] - grant_ref_t, reference to a shared page of the buffer
> + * allocated at XENSND_OP_OPEN
> + *
> + * Number of grant_ref_t entries in the whole page directory is not
> + * passed, but instead can be calculated as:
> + * num_grefs_total = (XENSND_OP_OPEN.buffer_sz + XEN_PAGE_SIZE - 1) /
> + * XEN_PAGE_SIZE
And what are the expected errors? Woudl it make sense to define those?
Say:
Returns:
-ENOBUFS: Cannot map that many buffers.
-EINVAL: Incorrect values in the requst?
-
> + */
> +
> +struct xensnd_page_directory {
> + grant_ref_t gref_dir_next_page;
> + grant_ref_t gref[1]; /* Variable length */
> +};
> +
> +/*
> + * Request close - close an opened pcm stream:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | XENSND_OP_CLOSE | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + */
> +
> +/*
> + * Request read/write - used for read (for capture) or write (for playback):
Maybe say also that XENSND_OP_OPEN MUST be called before these operations
are permitted.
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | operation | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | offset |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | length |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * operation - XENSND_OP_READ for read or XENSND_OP_WRITE for write
> + * offset - uint32_t, read or write data offset within the shared buffer
> + * passed with XENSND_OP_OPEN request
May also want to say that this offset must be less than buffer_sz.
In octets? May want to say that explicitly.
> + * length - uint32_t, read or write data length
In octets?
> + */
> +
> +struct xensnd_rw_req {
> + uint32_t offset;
> + uint32_t len;
> +};
> +
> +/*
> + * Request set/get volume - set/get channels' volume of the stream given:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | operation | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * operation - XENSND_OP_SET_VOLUME for volume set
> + * or XENSND_OP_GET_VOLUME for volume get
> + * Buffer passed with XENSND_OP_OPEN is used to exchange volume
> + * values:
Oh. That means you these operation are in effect 'barrier' ones.
As the buffer must be flushed before hand otherwise you would be
overwriting data stream information.
You should probably mention this semantic need?
Or alternatively the XENSND_OP_SET_VOLUME/XENSND_OP_GET_VOLUME could have
a similar structure to 'struct xensnd_rw_req' so that you have
the offset and len?
> + *
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | channel[0] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | channel[i] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | channel[XENSND_OP_OPEN.pcm_channels - 1] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * channel[i] - sint32_t, volume of i-th channel
You may want to say that i is uint8_t.
> + * Volume is expressed as a signed value in steps of 0.001 dB,
> + * while 0 being 0 dB.
> + */
> +
> +/*
> + * Request mute/unmute - mute/unmute stream:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | operation | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * operation - XENSND_OP_MUTE for mute or XENSND_OP_UNMUTE for unmute
> + * Buffer passed with XENSND_OP_OPEN is used to exchange mute/unmute
> + * values:
Again, same comments as above.
> + *
> + * 0
> octet
> + * +-----------------------------------------------------------------------+
> + * | channel[0] |
> + * +-----------------------------------------------------------------------+
> + * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------------------------------------------------------------+
> + * | channel[i] |
> + * +-----------------------------------------------------------------------+
> + * +/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------------------------------------------------------------+
> + * | channel[XENSND_OP_OPEN.pcm_channels - 1] |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * channel[i] - uint8_t, non-zero if i-th channel needs to be muted/unmuted
> + */
> +
> +/*
> + * All response packets have the same length (32 octets)
> + *
> + * Response for all requests:
> + * 0 1 2 3
> octet
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | id | operation | stream_idx |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | status | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + * |/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/|
> + * +-----------------+-----------------+-----------------+-----------------+
> + * | reserved |
> + * +-----------------+-----------------+-----------------+-----------------+
> + *
> + * id - uint16_t, copied from the request
> + * stream_idx - uint8_t, copied from request
> + * operation - uint8_t, XENSND_OP_* - copied from request
> + * status - int8_t, response status (XENSND_RSP_*)
Could this become an 'err' and the POSIX values used for errors?
> + */
> +
> +struct xensnd_req {
> + uint16_t id;
> + uint8_t operation;
> + uint8_t stream_idx;
> + uint32_t reserved;
> + union {
> + struct xensnd_open_req open;
> + struct xensnd_rw_req rw;
> + uint8_t reserved[24];
> + } op;
> +};
> +
> +struct xensnd_resp {
> + uint16_t id;
> + uint8_t operation;
> + uint8_t stream_idx;
> + int8_t status;
> + uint8_t reserved[27];
> +};
> +
> +DEFINE_RING_TYPES(xen_sndif, struct xensnd_req, struct xensnd_resp);
> +
> +#endif /* __XEN_PUBLIC_IO_SNDIF_H__ */
> --
> 2.7.4
>
_______________________________________________
Embedded-pv-devel mailing list
Embedded-pv-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/cgi-bin/mailman/listinfo/embedded-pv-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |