[Embedded-pv-devel] Issue with booting with xen,passthrough DTB

[Saumya Rajesh <saumyarajesh93@xxxxxxxxx>]

Hi

I am trying to passthrough the I2C bus[channel 2 group A] to DomU in
Xen. I am implementing this on R-Car H3.

I added xen,passthrough = "1" to the i2c2 node in r8a7795.dtsi and
rebuilt the dtb for Domain 0. The dtb works when I boot into Dom0, but
the kernel crashes when I try to boot again using the same dtb.
Assuming that the integrated device using i2c2 somehow gets corrupted
for the second run, I tried to passthrough the entire rcar sound
system, which is associated with i2c2. But I get the same result i.e.
Kernel boots for the first run but fails when I reboot using the same
dtb.

Following is the modification in Dom 0 dtb :

i2c2: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "renesas,i2c-r8a7795";
reg = <0 0xe6510000 0 0x40>;
interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 929>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
dmas = <&dmac1 0x95>, <&dmac1 0x94>;
dma-names = "tx", "rx";
i2c-scl-internal-delay-ns = <6>;
status = "disabled";
xen,passthrough = "1";
};

***
rcar_sound: sound@ec500000 {
***
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
status = "disabled";
xen,passthrough = "1";
***
Please see the attachment for the kernel log.

Any support or suggestion regarding the cause of this issue will be
much appreciated.

I have also posted another issue regarding passthrough [1]. Please
have a look into it also.

Regards
Saumya

[1] https://lists.xenproject.org/archives/html/xen-devel/2018-01/msg02618.html

Attachment: log_boot_xen_30012018.txt
Description: Text document

_______________________________________________
Embedded-pv-devel mailing list
Embedded-pv-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/embedded-pv-devel