[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Minios-devel] [UNIKRAFT PATCHv6 12/37] plat/kvm: Add Arm64 virtual timer library to provide ticks
Reviewed-by: Simon Kuenzer <simon.kuenzer@xxxxxxxxx>
On 14.09.2018 09:56, Wei Chen wrote:
From: Wei Chen <Wei.Chen@xxxxxxx>
On KVM platform, print debug message will use ukplat_monotonic_clock
to provide timestamp. So we implement this simple virtual timer
library for timestamp.
Signed-off-by: Wei Chen <Wei.Chen@xxxxxxx>
---
plat/common/arm/time.c | 152 +++++++++++++++++++++++++++++++++++++++++
plat/kvm/Makefile.uk | 1 +
2 files changed, 153 insertions(+)
create mode 100644 plat/common/arm/time.c
diff --git a/plat/common/arm/time.c b/plat/common/arm/time.c
new file mode 100644
index 0000000..a84e1a5
--- /dev/null
+++ b/plat/common/arm/time.c
@@ -0,0 +1,152 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Authors: Wei Chen <Wei.Chen@xxxxxxx>
+ *
+ * Copyright (c) 2018, Arm Ltd. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the copyright holder nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * THIS HEADER MAY NOT BE EXTRACTED OR MODIFIED IN ANY WAY.
+ */
+#include <stdlib.h>
+#include <uk/assert.h>
+#include <uk/plat/time.h>
+#include <uk/plat/irq.h>
+#include <uk/arch/atomic.h>
+#include <cpu.h>
+
+static uint64_t boot_ticks;
+static uint32_t counter_freq;
+
+/*
+ * Shift factor for counter scaling multiplier; referred to as S in the
+ * following comments.
+ */
+static uint8_t counter_shift;
+
+/* Multiplier for converting counter ticks to nsecs. (0.S) fixed point. */
+static uint32_t ns_per_tick;
+
+/* How many nanoseconds per second */
+#define NSEC_PER_SEC ukarch_time_sec_to_nsec(1)
+
+static inline uint64_t ticks_to_ns(uint64_t ticks)
+{
+ return (ns_per_tick * ticks) >> counter_shift;
+}
+
+static inline uint32_t get_counter_frequency(void)
+{
+ return SYSREG_READ32(cntfrq_el0);
+}
+
+static inline uint64_t read_virtual_count(void)
+{
+ return SYSREG_READ64(cntvct_el0);
+}
+
+/*
+ * monotonic_clock(): returns # of nanoseconds passed since
+ * generic_timer_time_init()
+ */
+static __nsec generic_timer_monotonic(void)
+{
+ return (__nsec)ticks_to_ns(read_virtual_count() - boot_ticks);
+}
+
+/*
+ * Return epoch offset (wall time offset to monotonic clock start).
+ */
+static __u64 generic_timer_epochoffset(void)
+{
+ return 0;
+}
+
+static int generic_timer_init(void)
+{
+ /*
+ * Calculate counter shift factor and scaling multiplier.
+ *
+ * counter_shift (S) needs to be the largest (<=32) shift factor where
+ * the result of the ns_per_tick calculation below fits into uint32_t
+ * without truncation. Note that we disallow an S of zero to ensure
+ * the loop always terminates.
+ *
+ * (0.S) ns_per_tick = NSEC_PER_SEC (S.S) / counter_freq (S.0)
+ */
+ uint64_t tmp;
+
+ counter_freq = get_counter_frequency();
+ counter_shift = 32;
+ do {
+ tmp = (NSEC_PER_SEC << counter_shift) / counter_freq;
+ if ((tmp & 0xFFFFFFFF00000000L) == 0L)
+ ns_per_tick = (uint32_t)tmp;
+ else
+ counter_shift--;
+ } while (counter_shift > 0 && ns_per_tick == 0L);
+ UK_BUGON(!ns_per_tick);
+
+ /*
+ * Monotonic time begins at boot_ticks (first read of counter
+ * before calibration).
+ */
+ boot_ticks = read_virtual_count();
+
+ return 0;
+}
+
+/* return ns since time_init() */
+__nsec ukplat_monotonic_clock(void)
+{
+ return generic_timer_monotonic();
+}
+
+/* return wall time in nsecs */
+__nsec ukplat_clock_wall(void)
+{
+ return generic_timer_monotonic() + generic_timer_epochoffset();
+}
+
+static int timer_handler(void *arg __unused)
+{
+ /* Yes, we handled the irq. */
+ return 1;
+}
+
+/* must be called before interrupts are enabled */
+void ukplat_time_init(void)
+{
+ int rc;
+
+ rc = ukplat_irq_register(0, timer_handler, NULL);
+ if (rc < 0)
+ UK_CRASH("Failed to register timer interrupt handler\n");
+
+ rc = generic_timer_init();
+ if (rc < 0)
+ UK_CRASH("Failed to initialize TSCCLOCK\n");
I will rename "TSCCLOCK" to "platform time". I think this is a left-over
when you ported this from `tscclock.c`. ;-)
+}
diff --git a/plat/kvm/Makefile.uk b/plat/kvm/Makefile.uk
index 54463e3..d2d687c 100644
--- a/plat/kvm/Makefile.uk
+++ b/plat/kvm/Makefile.uk
@@ -55,6 +55,7 @@ ifeq ($(findstring y,$(CONFIG_KVM_KERNEL_SERIAL_CONSOLE)
$(CONFIG_KVM_DEBUG_SERI
LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) +=
$(UK_PLAT_COMMON_BASE)/arm/pl011.c|common
endif
LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) +=
$(UK_PLAT_COMMON_BASE)/arm/cache64.S|common
+LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) +=
$(UK_PLAT_COMMON_BASE)/arm/time.c|common
LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBKVMPLAT_BASE)/arm/entry64.S
LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBKVMPLAT_BASE)/arm/setup.c
endif
_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel
|
