[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Minios-devel] [UNIKRAFT PATCH v3 3/7] plat/drivers: Configure the receive queue



Reviewed-by: Simon Kuenzer <simon.kuenzer@xxxxxxxxx>

On 24.10.18 16:02, Sharan Santhanam wrote:
The patch introduces the virtio implementation for setting up the
receive queue.

Signed-off-by: Sharan Santhanam <sharan.santhanam@xxxxxxxxx>
Signed-off-by: Razvan Cojocaru <razvan.cojocaru93@xxxxxxxxx>
---
  plat/drivers/virtio/virtio_net.c | 145 +++++++++++++++++++++++++++++++++++++--
  1 file changed, 140 insertions(+), 5 deletions(-)

diff --git a/plat/drivers/virtio/virtio_net.c b/plat/drivers/virtio/virtio_net.c
index 069f51f..99698f3 100644
--- a/plat/drivers/virtio/virtio_net.c
+++ b/plat/drivers/virtio/virtio_net.c
@@ -168,6 +168,10 @@ static struct uk_netdev_tx_queue 
*virtio_netdev_tx_queue_setup(
                                        struct uk_netdev *n, uint16_t queue_id,
                                        uint16_t nb_desc,
                                        struct uk_netdev_txqueue_conf *conf);
+static int virtio_netdev_vqueue_setup(struct virtio_net_device *vndev,
+                                     uint16_t queue_id, uint16_t nr_desc,
+                                     virtq_type_t queue_type,
+                                     struct uk_alloc *a);
  static struct uk_netdev_rx_queue *virtio_netdev_rx_queue_setup(
                                        struct uk_netdev *n,
                                        uint16_t queue_id, uint16_t nb_desc,
@@ -191,6 +195,7 @@ static int virtio_netdev_rxq_info_get(struct uk_netdev 
*dev, __u16 queue_id,
                                      struct uk_netdev_queue_info *qinfo);
  static int virtio_netdev_txq_info_get(struct uk_netdev *dev, __u16 queue_id,
                                      struct uk_netdev_queue_info *qinfo);
+static int virtio_netdev_recv_done(struct virtqueue *vq, void *priv);
/**
   * Static global constants
@@ -201,6 +206,23 @@ static struct uk_alloc *a;
  /**
   * The Driver method implementation.
   */
+static int virtio_netdev_recv_done(struct virtqueue *vq, void *priv)
+{
+       struct uk_netdev_rx_queue *rxq = NULL;
+
+       UK_ASSERT(vq && priv);
+
+       rxq = (struct uk_netdev_rx_queue *) priv;
+
+       /* Disable the interrupt for the ring */
+       virtqueue_intr_disable(vq);
+       rxq->intr_enabled &= ~(VTNET_INTR_EN);
+
+       /* Indicate to the network stack about an event */
+       uk_netdev_drv_rx_event(rxq->ndev, rxq->lqueue_id);
+       return 1;
+}
+
  static int virtio_netdev_xmit(struct uk_netdev *dev,
                              struct uk_netdev_tx_queue *queue,
                              struct uk_netbuf *pkt)
@@ -228,15 +250,111 @@ static int virtio_netdev_recv(struct uk_netdev *dev 
__unused,
  }
static struct uk_netdev_rx_queue *virtio_netdev_rx_queue_setup(
-                               struct uk_netdev *n, uint16_t queue_id __unused,
-                               uint16_t nb_desc __unused,
-                               struct uk_netdev_rxqueue_conf *conf __unused)
+                               struct uk_netdev *n, uint16_t queue_id,
+                               uint16_t nb_desc,
+                               struct uk_netdev_rxqueue_conf *conf)
  {
+       struct virtio_net_device *vndev;
        struct uk_netdev_rx_queue *rxq = NULL;
+       int rc;
UK_ASSERT(n);
+       UK_ASSERT(conf);
+       vndev = to_virtionetdev(n);
+       if (queue_id >= vndev->max_vqueue_pairs) {
+               uk_pr_err("Invalid virtqueue identifier: %"__PRIu16"\n",
+                         queue_id);
+               rc = -EINVAL;
+               goto err_exit;
+       }
+       /* Setup the virtqueue with the descriptor */
+       rc = virtio_netdev_vqueue_setup(vndev, queue_id, nb_desc, VNET_RX,
+                                       conf->a);
+       if (rc < 0) {
+               uk_pr_err("Failed to set up virtqueue %"__PRIu16": %d\n",
+                         queue_id, rc);
+               goto err_exit;
+       }
+       rxq  = &vndev->rxqs[rc];
+exit:
        return rxq;
+
+err_exit:
+       rxq = ERR2PTR(rc);
+       goto exit;
+}
+
+/**
+ * This function setup the vring infrastructure.
+ * @param vndev
+ *     Reference to the virtio net device.
+ * @param queue_id
+ *     User queue identifier
+ * @param nr_desc
+ *     User configured number of descriptors.
+ * @param queue_type
+ *     Queue type.
+ * @param a
+ *     Reference to the allocator.
+ */
+static int virtio_netdev_vqueue_setup(struct virtio_net_device *vndev,
+               uint16_t queue_id, uint16_t nr_desc, virtq_type_t queue_type,
+               struct uk_alloc *a)
+{
+       int rc = 0;
+       int id = 0;
+       virtqueue_callback_t callback;
+       uint16_t max_desc, hwvq_id;
+       struct virtqueue *vq;
+
+       if (queue_type == VNET_RX) {
+               id = vndev->rx_vqueue_cnt;
+               callback = virtio_netdev_recv_done;
+               max_desc = vndev->rxqs[id].max_nb_desc;
+               hwvq_id = vndev->rxqs[id].hwvq_id;
+       } else {
+               id = vndev->tx_vqueue_cnt;
+               /* We don't support the callback from the txqueue yet */
+               callback = NULL;
+               max_desc = vndev->txqs[id].max_nb_desc;
+               hwvq_id = vndev->txqs[id].hwvq_id;
+       }
+
+       if (unlikely(max_desc < nr_desc)) {
+               uk_pr_err("Max allowed desc: %"__PRIu16" Requested 
desc:%"__PRIu16"\n",
+                         max_desc, nr_desc);
+               return -ENOBUFS;
+       }
+
+       /* Check if the descriptor is a power of 2 */
+       if (unlikely(nr_desc & (nr_desc - 1))) {
+               uk_pr_err("Expect descriptor count as a power 2\n");
+               return -EINVAL;
+       }
+       vq = virtio_vqueue_setup(vndev->vdev, hwvq_id, nr_desc, callback, a);
+       if (unlikely(PTRISERR(vq))) {
+               uk_pr_err("Failed to set up virtqueue %"__PRIu16"\n",
+                         queue_id);
+               rc = PTR2ERR(vq);
+               return rc;
+       }
+
+       if (queue_type == VNET_RX) {
+               vq->priv = &vndev->rxqs[id];
+               vndev->rxqs[id].ndev = &vndev->netdev;
+               vndev->rxqs[id].vq = vq;
+               vndev->rxqs[id].nb_desc = nr_desc;
+               vndev->rxqs[id].lqueue_id = queue_id;
+               vndev->rx_vqueue_cnt++;
+       } else {
+               vndev->txqs[id].vq = vq;
+               vndev->txqs[id].ndev = &vndev->netdev;
+               vndev->txqs[id].nb_desc = nr_desc;
+               vndev->txqs[id].lqueue_id = queue_id;
+               vndev->tx_vqueue_cnt++;
+       }
+       return id;
  }
static struct uk_netdev_tx_queue *virtio_netdev_tx_queue_setup(
@@ -251,12 +369,29 @@ static struct uk_netdev_tx_queue 
*virtio_netdev_tx_queue_setup(
  }
static int virtio_netdev_rxq_info_get(struct uk_netdev *dev,
-                                     __u16 queue_id __unused,
+                                     __u16 queue_id,
                                      struct uk_netdev_queue_info *qinfo)
  {
+       struct virtio_net_device *vndev;
+       struct uk_netdev_rx_queue *rxq;
+       int rc = 0;
+
        UK_ASSERT(dev);
        UK_ASSERT(qinfo);
-       return 0;
+       vndev = to_virtionetdev(dev);
+       if (unlikely(queue_id >= vndev->max_vqueue_pairs)) {
+               uk_pr_err("Invalid virtqueue id: %"__PRIu16"\n", queue_id);
+               rc = -EINVAL;
+               goto exit;
+       }
+       rxq = &vndev->rxqs[queue_id];
+       qinfo->nb_min = 1;
+       qinfo->nb_max = rxq->max_nb_desc;
+       qinfo->nb_is_power_of_two = 1;
+
+exit:
+       return rc;
+
  }
static int virtio_netdev_txq_info_get(struct uk_netdev *dev,


_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.