[Minios-devel] [UNIKRAFT PATCH v3 1/8] plat/{kvm, xen}: Clean up Makefile.uk conditional build rules

[Florian Schmidt <florian.schmidt@xxxxxxxxx>]

1) Those ifeqs aren't needed because the $(CONFIG_ARCH...) part already
   deals with the conditions under which to build those files.
2) Add $(LIBKVMPLAT_BASE)/include as include directory for libkvmpci.

Signed-off-by: Florian Schmidt <florian.schmidt@xxxxxxxxx>
---
 plat/kvm/Makefile.uk |  6 ++----
 plat/xen/Makefile.uk | 34 +++++++++++++++++-----------------
 2 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/plat/kvm/Makefile.uk b/plat/kvm/Makefile.uk
index 1f9c5dc0..b04a9868 100644
--- a/plat/kvm/Makefile.uk
+++ b/plat/kvm/Makefile.uk
@@ -21,7 +21,6 @@ LIBKVMPLAT_CINCLUDES-y         += 
-I$(UK_PLAT_COMMON_BASE)/include
 ##
 ## Architecture library definitions for x86_64
 ##
-ifeq ($(CONFIG_ARCH_X86_64),y)
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/trace.c|common
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/traps.c|common
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/cpu_native.c|common
@@ -45,12 +44,10 @@ endif
 ifeq ($(findstring y,$(CONFIG_KVM_KERNEL_SERIAL_CONSOLE) 
$(CONFIG_KVM_DEBUG_SERIAL_CONSOLE)),y)
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(LIBKVMPLAT_BASE)/x86/serial_console.c
 endif
-endif
 
 ##
 ## Architecture library definitions for arm64
 ##
-ifeq ($(CONFIG_ARCH_ARM_64),y)
 ifeq ($(findstring y,$(CONFIG_KVM_KERNEL_SERIAL_CONSOLE) 
$(CONFIG_KVM_DEBUG_SERIAL_CONSOLE)),y)
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += 
$(UK_PLAT_COMMON_BASE)/arm/pl011.c|common
 endif
@@ -65,7 +62,6 @@ LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += 
$(LIBKVMPLAT_BASE)/arm/pagetable.S
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBKVMPLAT_BASE)/arm/setup.c
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBKVMPLAT_BASE)/arm/lcpu.c
 LIBKVMPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBKVMPLAT_BASE)/arm/intctrl.c
-endif
 
 LIBKVMPLAT_SRCS-y              += $(LIBKVMPLAT_BASE)/shutdown.c
 LIBKVMPLAT_SRCS-y              += $(LIBKVMPLAT_BASE)/memory.c
@@ -77,7 +73,9 @@ LIBKVMPLAT_SRCS-y              += 
$(UK_PLAT_COMMON_BASE)/memory.c|common
 ##
 ## PCI library definitions
 ##
+LIBKVMPCI_ASINCLUDES-$(CONFIG_ARCH_X86_64)  += -I$(LIBKVMPLAT_BASE)/include
 LIBKVMPCI_ASINCLUDES-$(CONFIG_ARCH_X86_64)  += -I$(UK_PLAT_COMMON_BASE)/include
+LIBKVMPCI_CINCLUDES-$(CONFIG_ARCH_X86_64)   += -I$(LIBKVMPLAT_BASE)/include
 LIBKVMPCI_CINCLUDES-$(CONFIG_ARCH_X86_64)   += -I$(UK_PLAT_COMMON_BASE)/include
 LIBKVMPCI_SRCS-$(CONFIG_ARCH_X86_64)        += 
$(UK_PLAT_COMMON_BASE)/pci_bus.c|common
 
diff --git a/plat/xen/Makefile.uk b/plat/xen/Makefile.uk
index 5d777b23..562b2b98 100644
--- a/plat/xen/Makefile.uk
+++ b/plat/xen/Makefile.uk
@@ -31,7 +31,6 @@ LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/io.c
 LIBXENPLAT_SRCS-y              += $(UK_PLAT_COMMON_BASE)/lcpu.c|common
 LIBXENPLAT_SRCS-y              += $(UK_PLAT_COMMON_BASE)/memory.c|common
 
-ifneq (,$(filter x86_32 x86_64,$(CONFIG_UK_ARCH)))
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/trace.c|common
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/traps.c|common
 ifeq ($(CONFIG_HAVE_SCHED),y)
@@ -39,14 +38,13 @@ LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += 
$(UK_PLAT_COMMON_BASE)/x86/thread_start
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(UK_PLAT_COMMON_BASE)/thread.c|common
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(UK_PLAT_COMMON_BASE)/sw_ctx.c|common
 endif
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/setup.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/traps.c
-LIBXENPLAT_SRCS-$(ARCH_X86_32) += $(LIBXENPLAT_BASE)/x86/entry32.S
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/setup.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/traps.c
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/entry64.S
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/mm.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/arch_events.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/arch_time.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/x86/gnttab.c|x86
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/mm.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/arch_events.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/arch_time.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_X86_64) += $(LIBXENPLAT_BASE)/x86/gnttab.c|x86
 
 ifneq ($(XEN_HVMLITE),y)
 LIBXENPLAT_ASFLAGS-y           += -DCONFIG_PARAVIRT
@@ -55,18 +53,20 @@ LIBXENPLAT_SRCS-y              += 
$(LIBXENPLAT_BASE)/x86/cpu_pv.c
 else
 LIBXENPLAT_SRCS-y              += $(UK_PLAT_COMMON_BASE)/x86/cpu_native.c
 endif
-endif
 
-ifneq (,$(filter arm arm_64,$(CONFIG_UK_ARCH)))
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/arm/setup.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/arm/traps.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/setup.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/traps.c
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/entry32.S
-LIBXENPLAT_SRCS-$(ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/entry64.S
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/arm/arch_events.c
-LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/arm/arch_time.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/arch_events.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/arch_time.c
 LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_32) += $(LIBXENPLAT_BASE)/arm/hypercalls32.S
-LIBXENPLAT_SRCS-$(ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/hypercalls64.S
-endif
+
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/setup.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/traps.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/entry64.S
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/arch_events.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/arch_time.c
+LIBXENPLAT_SRCS-$(CONFIG_ARCH_ARM_64) += $(LIBXENPLAT_BASE)/arm/hypercalls64.S
 
 LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/lcpu.c
 LIBXENPLAT_SRCS-y              += $(LIBXENPLAT_BASE)/console.c
-- 
2.20.1


_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel