[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Minios-devel] [UNIKRAFT/ZLIB, v1, 1/1] Initial port of zlib to Unikraft



This is a port of zlib to Unikraft as an external library. It requires
libc, so in your application Makefile the library dependency list
should read:

            LIBS := ...:$(UK_LIBS)/newlib:$(UK_LIBS)/zlib:...

Also make sure that vfscore is selected, along with ramfs and devfs.

Signed-off-by: Felipe Huici <felipe.huici@xxxxxxxxx>
---
 CODING_STYLE.md |   4 +++
 CONTRIBUTING.md |   4 +++
 COPYING.md      |  39 ++++++++++++++++++++++
 Config.uk       |   4 +++
 MAINTAINERS.md  |  10 ++++++
 Makefile.uk     |  79 +++++++++++++++++++++++++++++++++++++++++++
 README.md       |  11 ++++++
 exportsyms.uk   | 102 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 253 insertions(+)
 create mode 100644 CODING_STYLE.md
 create mode 100644 CONTRIBUTING.md
 create mode 100644 COPYING.md
 create mode 100644 Config.uk
 create mode 100644 MAINTAINERS.md
 create mode 100644 Makefile.uk
 create mode 100644 README.md
 create mode 100644 exportsyms.uk

diff --git a/CODING_STYLE.md b/CODING_STYLE.md
new file mode 100644
index 0000000..5730041
--- /dev/null
+++ b/CODING_STYLE.md
@@ -0,0 +1,4 @@
+Coding Style
+============
+
+Please refer to the `CODING_STYLE.md` file in the main Unikraft repository.
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
new file mode 100644
index 0000000..5f55eca
--- /dev/null
+++ b/CONTRIBUTING.md
@@ -0,0 +1,4 @@
+Contributing to Unikraft
+=======================
+
+Please refer to the `CONTRIBUTING.md` file in the main Unikraft repository.
diff --git a/COPYING.md b/COPYING.md
new file mode 100644
index 0000000..973051a
--- /dev/null
+++ b/COPYING.md
@@ -0,0 +1,39 @@
+License
+=======
+
+Unikraft zlib wrappers
+------------------------
+
+This repository contains wrapper code to build zlib with Unikraft.
+Each C code file in this repository should declare who is the
+copyright owner and under which terms and conditions the code is
+licensed. If such a licence note is missing, the following copyright
+notice will apply:
+
+       Copyright (c) 2019, NEC Europe Ltd., NEC Corporation. All rights 
reserved.
+
+       Redistribution and use in source and binary forms, with or without
+       modification, are permitted provided that the following conditions
+       are met:
+
+       1. Redistributions of source code must retain the above copyright
+          notice, this list of conditions and the following disclaimer.
+       2. Redistributions in binary form must reproduce the above copyright
+          notice, this list of conditions and the following disclaimer in the
+          documentation and/or other materials provided with the distribution.
+       3. Neither the name of the copyright holder nor the names of its
+          contributors may be used to endorse or promote products derived from
+          this software without specific prior written permission.
+
+       THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 
IS"
+       AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 
THE
+       IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE
+       ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS 
BE
+       LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+       CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+       SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+       INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+       CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+       ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 
THE
+       POSSIBILITY OF SUCH DAMAGE.
+
diff --git a/Config.uk b/Config.uk
new file mode 100644
index 0000000..6e5a75f
--- /dev/null
+++ b/Config.uk
@@ -0,0 +1,4 @@
+menuconfig LIBZLIB
+          bool "zlib - a compression library"
+          default y
+          depends on HAVE_LIBC
diff --git a/MAINTAINERS.md b/MAINTAINERS.md
new file mode 100644
index 0000000..5a4abc4
--- /dev/null
+++ b/MAINTAINERS.md
@@ -0,0 +1,10 @@
+Maintainers List
+================
+
+For notes on how to read this information, please refer to `MAINTAINERS.md` in
+the main Unikraft repository.
+
+       LIBUUID-UNIKRAFT
+       M:      Felipe Huici <felipe.huici@xxxxxxxxx>
+       L:      minios-devel@xxxxxxxxxxxxx
+       F: *
diff --git a/Makefile.uk b/Makefile.uk
new file mode 100644
index 0000000..de7e182
--- /dev/null
+++ b/Makefile.uk
@@ -0,0 +1,79 @@
+#  libzlib Makefile.uc
+#
+#  Authors: Felipe Huici <felipe.huici@xxxxxxxxx>
+#
+#
+#  Copyright (c) 2017, NEC Europe Ltd., NEC Corporation. All rights reserved.
+#
+#  Redistribution and use in source and binary forms, with or without
+#  modification, are permitted provided that the following conditions
+#  are met:
+#
+#  1. Redistributions of source code must retain the above copyright
+#     notice, this list of conditions and the following disclaimer.
+#  2. Redistributions in binary form must reproduce the above copyright
+#     notice, this list of conditions and the following disclaimer in the
+#     documentation and/or other materials provided with the distribution.
+#  3. Neither the name of the copyright holder nor the names of its
+#     contributors may be used to endorse or promote products derived from
+#     this software without specific prior written permission.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+#  POSSIBILITY OF SUCH DAMAGE.
+#
+#  THIS HEADER MAY NOT BE EXTRACTED OR MODIFIED IN ANY WAY.
+#
+
+################################################################################
+# Library registration
+################################################################################
+$(eval $(call addlib_s,libzlib,$(CONFIG_LIBZLIB)))
+
+################################################################################
+# Sources
+################################################################################
+LIBZLIB_VERSION=1.2.11
+LIBZLIB_URL=http://www.zlib.net/zlib-$(LIBZLIB_VERSION).tar.gz
+LIBZLIB_DIR=zlib-$(LIBZLIB_VERSION)
+
+LIBZLIB_PATCHDIR=$(LIBZLIB_BASE)/patches
+$(eval $(call fetch,libzlib,$(LIBZLIB_URL),$(LIBZLIB_VERSION).tar.gz))
+$(eval $(call patch,libzlib,$(LIBZLIB_PATCHDIR),$(LIBZLIB_DIR)))
+
+################################################################################
+# Helpers
+################################################################################
+LIBZLIB=$(LIBZLIB_ORIGIN)/$(LIBZLIB_DIR)
+
+################################################################################
+# Library includes
+################################################################################
+CINCLUDES-$(CONFIG_LIBZLIB) += -I$(LIBZLIB)     
+
+################################################################################
+# Sources
+################################################################################
+LIBZLIB_SRCS-y += $(LIBZLIB)/inflate.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/gzclose.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/zutil.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/crc32.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/uncompr.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/gzread.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/trees.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/gzlib.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/infback.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/gzwrite.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/compress.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/inftrees.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/deflate.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/adler32.c
+LIBZLIB_SRCS-y += $(LIBZLIB)/inffast.c
diff --git a/README.md b/README.md
new file mode 100644
index 0000000..b5a1e78
--- /dev/null
+++ b/README.md
@@ -0,0 +1,11 @@
+libzlib for Unikraft
+===================
+This is a port of zlib to Unikraft. It requires newlib, so in your
+application Makefile the library dependency list should read:
+
+       LIBS := ...:$(UK_LIBS)/newlib:$(UK_LIBS)/zlib:...
+
+Also make sure that vfscore is selected, along with ramfs and devfs.
+
+Please refer to the `README.md` as well as the documentation in the `doc/`
+subdirectory of the main unikraft repository for further information.
diff --git a/exportsyms.uk b/exportsyms.uk
new file mode 100644
index 0000000..e674788
--- /dev/null
+++ b/exportsyms.uk
@@ -0,0 +1,102 @@
+deflateInit
+deflate
+deflateEnd
+inflateInit
+inflate
+inflateEnd
+deflateInit2
+deflateSetDictionary
+deflateGetDictionary
+deflateCopy
+deflateReset
+deflateParams
+deflateTune
+deflateBound
+deflatePending
+deflatePrime
+deflateSetHeader
+inflateInit2
+inflateSetDictionary
+inflateGetDictionary
+inflateSync
+inflateCopy
+inflateReset
+inflateReset2
+inflatePrime
+inflateMark
+inflateGetHeader
+inflateBackInit
+inflateBack
+inflateBackEnd
+zlibCompileFlags
+compress
+compress2
+compressBound
+uncompress
+uncompress2
+gzopen
+gzdopen
+gzbuffer
+gzsetparams
+gzread
+gzfread
+gzwrite
+gzfwrite
+gzprintf
+gzputs
+gzputc
+gzgetc
+gzungetc
+gzflush
+gzseek
+gzrewind
+gztell
+gzoffset
+gzeof
+gzdirect
+gzclose
+gzclose_r
+gzclose_w
+gzclearerr
+adler32
+adler32_z
+adler32_combine
+crc32
+crc32_z
+crc32_combine
+deflateInit_
+inflateInit_
+deflateInit2_
+inflateInit2_
+inflateBackInit_
+gzgetc_
+gzopen64
+gzseek64
+gztell64
+gzoffset64
+adler32_combine64
+crc32_combine64
+gzopen64
+gzseek64
+gztell64
+gzoffset64
+adler32_combine64
+crc32_combine64
+gzopen
+gzseek
+gztell
+gzoffset
+adler32_combine
+crc32_combine
+adler32_combine
+crc32_combine
+inflateSyncPoint
+inflateUndermine
+inflateValidate
+inflateResetKeep
+deflateResetKeep
+gzopen_w
+gzvprintf
+gzerror
+zlibVersion
+gzgets
\ No newline at end of file
-- 
2.11.0


_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.