|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Minios-devel] [UNIKRAFT PATCHv3 1/7] plat/common: Calculate shift factors for coversion between ns and tick
Hi all,
Thanks for the patch. Please find my comments inline:
On 30.07.19, 16:27, "Jia He" <justin.he@xxxxxxx> wrote:
We had shift factor for coverting counter ticks to ns, but it's not
enough. Sometime, we need to covert ns to ticks. For example, we'll
transfer sleep(ns) to counter ticks. If we don't have the shift factor,
the conversion accuracy will be lower.
Signed-off-by: Wei Chen <wei.chen@xxxxxxx>
Signed-off-by: Jianyong Wu <jianyong.wu@xxxxxxx>
Signed-off-by: Jia He <justin.he@xxxxxxx>
---
plat/common/arm/time.c | 111 +++++++++++++++++++++++++++++++----------
1 file changed, 86 insertions(+), 25 deletions(-)
diff --git a/plat/common/arm/time.c b/plat/common/arm/time.c
index 1b30903..4c66039 100644
--- a/plat/common/arm/time.c
+++ b/plat/common/arm/time.c
@@ -47,21 +47,83 @@
static uint64_t boot_ticks;
static uint32_t counter_freq;
-/*
- * Shift factor for counter scaling multiplier; referred to as S in the
- * following comments.
- */
-static uint8_t counter_shift;
-/* Multiplier for converting counter ticks to nsecs. (0.S) fixed point. */
+/* Shift factor for converting ticks to ns */
+static uint8_t counter_shift_to_ns;
+
+/* Shift factor for converting ns to ticks */
+static uint8_t counter_shift_to_tick;
+
+/* Multiplier for converting counter ticks to nsecs */
static uint32_t ns_per_tick;
+/* Multiplier for converting nsecs to counter ticks */
+static uint32_t tick_per_ns;
+
+/*
+ * The maximum time range in seconds which can be converted by multiplier
+ * and shift factors. This will guarantee the converted value not to exceed
+ * 64-bit unsigned integer. Increase the time range will reduce the
accuracy
+ * of conversion, because we will get smaller multiplier and shift factors.
+ * In this case, we selected 3600s as the time range.
+ */
+#define __MAX_CONVERT_SECS 3600UL
COMMNET: As I understand it, this #define is also used when calculating the
ns_per_tick, it not only imposes a limit to the time range, but also to the
tick range. That is, we do not support converting ns_to_ticks for more than
3600 seconds, and as well we do not support to convert ticks_to_ns for more
than 3600000000 ticks, correct? Maybe change the name of the #define to
something more generic.
+
/* How many nanoseconds per second */
#define NSEC_PER_SEC ukarch_time_sec_to_nsec(1)
static inline uint64_t ticks_to_ns(uint64_t ticks)
{
- return (ns_per_tick * ticks) >> counter_shift;
+ return (ns_per_tick * ticks) >> counter_shift_to_ns;
COMMENT: Maybe add an assertion for the maximum number of ticks as a sanity
check?
+}
+
+static inline uint64_t ns_to_ticks(uint64_t ns)
+{
+ return (tick_per_ns * ns) >> counter_shift_to_tick;
COMMENT: Maybe add an assertion for the maximum number of seconds as a sanity
check?
+}
+
+/*
+ * Calculate multiplier/shift factors for scaled math.
+ */
+static void calculate_mult_shift(uint32_t *mult, uint8_t *shift,
+ uint64_t from, uint64_t to)
+{
+ uint64_t tmp;
+ uint32_t sft, sftacc = 32;
+
+ /*
+ * Calculate the shift factor which is limiting the conversion
+ * range:
+ */
+ tmp = ((uint64_t)__MAX_CONVERT_SECS * from) >> 32;
+ while (tmp) {
+ tmp >>= 1;
+ sftacc--;
+ }
+
+
+ /*
+ * Calculate shift factor (S) and scaling multiplier (M).
+ *
+ * (S) needs to be the largest shift factor (<= max_shift) where
+ * the result of the M calculation below fits into uint32_t
+ * without truncation.
+ *
+ * multiplier = (target << shift) / source
+ */
+ for (sft = 32; sft > 0; sft--) {
+ tmp = (uint64_t) to << sft;
+
+ /* Ensuring we round to nearest when calculating the
+ * multiplier
+ */
+ tmp += from / 2;
+ tmp /= from;
+ if ((tmp >> sftacc) == 0)
+ break;
+ }
+ *mult = tmp;
+ *shift = sft;
}
/*
@@ -145,29 +207,28 @@ static __u64 generic_timer_epochoffset(void)
static int generic_timer_init(void)
{
+ counter_freq = get_counter_frequency();
+
/*
- * Calculate counter shift factor and scaling multiplier.
- *
- * counter_shift (S) needs to be the largest (<=32) shift factor where
- * the result of the ns_per_tick calculation below fits into uint32_t
- * without truncation. Note that we disallow an S of zero to ensure
- * the loop always terminates.
- *
- * (0.S) ns_per_tick = NSEC_PER_SEC (S.S) / counter_freq (S.0)
+ * Calculate the shift factor and scaling multiplier for
+ * cpnverting ticks to ns.
*/
TYPO: Typo in comment: cpnverting -> converting
- uint64_t tmp;
+ calculate_mult_shift(&ns_per_tick, &counter_shift_to_ns,
+ counter_freq, NSEC_PER_SEC);
- counter_freq = get_counter_frequency();
- counter_shift = 32;
- do {
- tmp = (NSEC_PER_SEC << counter_shift) / counter_freq;
- if ((tmp & 0xFFFFFFFF00000000L) == 0L)
- ns_per_tick = (uint32_t)tmp;
- else
- counter_shift--;
- } while (counter_shift > 0 && ns_per_tick == 0L);
+ /* We disallow zero ns_per_tick */
UK_BUGON(!ns_per_tick);
+ /*
+ * Calculate the shift factor and scaling multiplier for
+ * cpnverting ns to ticks.
+ */
TYPO: Typo in comment: cpnverting -> converting
+ calculate_mult_shift(&tick_per_ns, &counter_shift_to_tick,
+ NSEC_PER_SEC, counter_freq);
+
+ /* We disallow zero ns_per_tick */
+ UK_BUGON(!tick_per_ns);
+
/*
* Monotonic time begins at boot_ticks (first read of counter
* before calibration).
--
2.17.1
_______________________________________________
Minios-devel mailing list
Minios-devel@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/mailman/listinfo/minios-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |