[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[MirageOS-devel] request for solving the problem
Hi,
I had some problem about running dom U
I refered to https://mirage.io/wiki/xen-on-cubieboard2 and below log is from myboard.
My problem is that I couldn`t access the DomU console.
I think It has a bug.
May I ask which point is wrong?
Regards
Gyungmin
mirage@cubietruck:~$ sudo xl create -c linux-guest-1.conf
Parsing config from linux-guest-1.conf
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.16.0-00124-g6b6dcc2-dirty (arm-builder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1782 SMP Tue Jun 16 00:47:09 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: XENVM-4.4
[ 0.000000] cma: CMA: reserved 64 MiB at 8c000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
[ 0.000000] PERCPU: Embedded 8 pages/cpu @cbdce000 s8832 r8192 d15744 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: console=hvc0 xencons=tty root=/dev/xvda
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 182684K/262144K available (7009K kernel code, 843K rwdata, 2696K rodata, 588K init, 317K bss, 79460K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0b82934 (9707 kB)
[ 0.000000] .init : 0xc0b83000 - 0xc0c16280 ( 589 kB)
[ 0.000000] .data : 0xc0c18000 - 0xc0ceace0 ( 844 kB)
[ 0.000000] .bss : 0xc0ceace8 - 0xc0d3a490 ( 318 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.000016] Switching to timer-based delay loop
[ 0.000169] Console: colour dummy device 80x30
[ 0.000201] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.000218] pid_max: default: 32768 minimum: 301
[ 0.000355] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000367] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000939] CPU: Testing write buffer coherency: ok
[ 0.001272] /cpus/cpu@0 missing clock-frequency property
[ 0.001296] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001372] Xen 4.4 support found, events_irq=31 gnttab_frame=0xb0000000
[ 0.001410] Please upgrade your Xen.
[ 0.001410] If your platform has any non-coherent DMA devices, they won't work properly.
[ 0.001498] xen:grant_table: Grant tables using version 1 layout
[ 0.001551] Grant table initialized
[ 0.001654] xen:events: Using FIFO-based ABI
[ 0.001690] Xen: initializing cpu0
[ 0.001871] Setting up static identity map for 0x808a59f8 - 0x808a5a90
[ 0.003041] Brought up 1 CPUs
[ 0.003058] SMP: Total of 1 processors activated.
[ 0.003065] CPU: All CPU(s) started in SVC mode.
[ 0.003629] devtmpfs: initialized
[ 0.004511] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
[ 0.004993] pinctrl core: initialized pinctrl subsystem
[ 0.005510] regulator-dummy: no parameters
[ 0.008689] NET: Registered protocol family 16
[ 0.010610] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.015932] No ATAGs?
[ 0.016761] Serial: AMBA PL011 UART driver
[ 0.032677] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[ 0.032715] edma-dma-engine: probe of edma-dma-engine.0 failed with error -5
[ 0.032870] xen:balloon: Initialising balloon driver
[ 0.039948] xen_balloon: Initialising balloon driver
[ 0.041760] vgaarb: loaded
[ 0.042677] SCSI subsystem initialized
[ 0.043664] usbcore: registered new interface driver usbfs
[ 0.043749] usbcore: registered new interface driver hub
[ 0.044061] usbcore: registered new device driver usb
[ 0.044725] Linux video capture interface: v2.00
[ 0.044793] pps_core: LinuxPPS API ver. 1 registered
[ 0.044801] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.044831] PTP clock support registered
[ 0.044926] EDAC MC: Ver: 3.0.0
[ 0.046615] Advanced Linux Sound Architecture Driver Initialized.
[ 0.048241] Switched to clocksource arch_sys_counter
[ 0.064402] NET: Registered protocol family 2
[ 0.065222] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.065272] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.065310] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.065375] TCP: reno registered
[ 0.065392] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.065431] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.065663] NET: Registered protocol family 1
[ 0.066093] RPC: Registered named UNIX socket transport module.
[ 0.066111] RPC: Registered udp transport module.
[ 0.066118] RPC: Registered tcp transport module.
[ 0.066125] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.067977] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 0.080415] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.081353] NFS: Registering the id_resolver key type
[ 0.081427] Key type id_resolver registered
[ 0.081436] Key type id_legacy registered
[ 0.081519] msgmni has been set to 484
[ 0.082446] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.082475] io scheduler noop registered
[ 0.082490] io scheduler deadline registered
[ 0.082701] io scheduler cfq registered (default)
[ 0.086069] xen:xen_evtchn: Event-channel device installed
[ 0.162721] console [hvc0] enabled
[ 0.162846] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.165138] Serial: IMX driver
[ 0.165377] msm_serial: driver initialized
[ 0.165582] STMicroelectronics ASC driver initialized
[ 0.166052] serial: Freescale lpuart driver
[ 0.166252] [drm] Initialized drm 1.1.0 20060810
[ 0.171823] loop: module loaded
[ 0.190594] blktap_device_init: blktap device major 254
[ 0.190642] blktap_ring_init: blktap ring major: 240
[ 0.208637] tun: Universal TUN/TAP device driver, 1.6
[ 0.208678] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.210685] xen_netfront: Initialising Xen virtual ethernet driver
[ 0.215158] blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled;
[ 0.222765] xvda: unknown partition table
[ 0.225949] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.226091] usbcore: registered new interface driver pegasus
[ 0.226224] usbcore: registered new interface driver asix
[ 0.226343] usbcore: registered new interface driver ax88179_178a
[ 0.226451] usbcore: registered new interface driver cdc_ether
[ 0.226560] usbcore: registered new interface driver smsc75xx
[ 0.226663] usbcore: registered new interface driver smsc95xx
[ 0.226819] usbcore: registered new interface driver net1080
[ 0.226925] usbcore: registered new interface driver cdc_subset
[ 0.227000] usbcore: registered new interface driver zaurus
[ 0.227133] usbcore: registered new interface driver cdc_ncm
[ 0.227193] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.227221] ehci-pci: EHCI PCI platform driver
[ 0.227331] ehci-platform: EHCI generic platform driver
[ 0.227516] ehci-omap: OMAP-EHCI Host Controller driver
[ 0.227627] ehci-orion: EHCI orion driver
[ 0.227714] SPEAr-ehci: EHCI SPEAr driver
[ 0.227804] tegra-ehci: Tegra EHCI driver
[ 0.228407] usbcore: registered new interface driver usb-storage
[ 0.363895] mousedev: PS/2 mouse device common for all mice
[ 0.366158] i2c /dev entries driver
[ 0.366784] usbcore: registered new interface driver uvcvideo
[ 0.366837] USB Video Class driver (1.1.1)
[ 0.366868] gspca_main: v2.14.0 registered
[ 0.369913] device-mapper: uevent: version 1.0.3
[ 0.371181] Setting capacity to 8388608
[ 0.371278] xvda: detected capacity change from 0 to 4294967296
[ 0.371551] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[ 0.373538] sdhci: Secure Digital Host Controller Interface driver
[ 0.373618] sdhci: Copyright(c) Pierre Ossman
[ 0.374128] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.374683] usbcore: registered new interface driver usbhid
[ 0.374733] usbhid: USB HID core driver
[ 0.374842] usbcore: registered new interface driver r8188eu
[ 0.379124] nf_conntrack version 0.5.0 (3878 buckets, 15512 max)
[ 0.380163] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.380378] TCP: cubic registered
[ 0.380426] NET: Registered protocol family 17
[ 0.380777] Key type dns_resolver registered
[ 0.380962] ThumbEE CPU extension supported.
[ 0.381013] Registering SWP/SWPB emulation handler
[ 0.479075] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.479323] ALSA device list:
[ 0.479360] No soundcards found.
[ 0.482200] EXT4-fs (xvda): couldn't mount as ext3 due to feature incompatibilities
[ 0.484018] EXT4-fs (xvda): couldn't mount as ext2 due to feature incompatibilities
[ 0.519219] EXT4-fs (xvda): mounted filesystem with ordered data mode. Opts: (null)
[ 0.519351] VFS: Mounted root (ext4 filesystem) readonly on device 202:0.
[ 0.531254] devtmpfs: mounted
[ 0.531962] Freeing unused kernel memory: 588K (c0b83000 - c0c16000)
Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory
[ 1.157544] random: init urandom read with 18 bits of entropy available
[ 1.556890] init: plymouth-upstart-bridge main process (41) terminated with status 1
[ 1.557111] init: plymouth-upstart-bridge main process ended, respawning
[ 1.599467] init: plymouth-upstart-bridge main process (54) terminated with status 1
[ 1.599642] init: plymouth-upstart-bridge main process ended, respawning
[ 1.622858] init: plymouth-upstart-bridge main process (57) terminated with status 1
[ 1.623053] init: plymouth-upstart-bridge main process ended, respawning
[ 1.712897] init: ureadahead main process (44) terminated with status 5
* Starting Mount filesystems on boot [ OK ]
* Starting Populate /dev filesystem [ OK ]
* Stopping Populate /dev filesystem [ OK ]
* Starting Fix-up /sys/kernel/debug filesystem [ OK ]
* Stopping Fix-up /sys/kernel/debug filesystem [ OK ]
* Starting Populate and link to /run filesystem [ OK ]
* Stopping Populate and link to /run filesystem [ OK ]
* Stopping Track if upstart is running in a container [ OK ]
* Starting Initialize or finalize resolvconf [ OK ]
* Starting set console keymap [ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted [ OK ]
* Starting Signal sysvinit that virtual filesystems are mounted [ OK ]
* Starting Bridge udev events into upstart [ OK ]
* Stopping set console keymap [ OK ]
* Starting Signal sysvinit that remote filesystems are mounted [ OK ]
* Starting device node and kernel event manager [ OK ]
* Starting load modules from /etc/modules [ OK ]
* Starting cold plug devices [ OK ]
* Starting log initial device creation [ OK ]
* Stopping load modules from /etc/modules [ OK ]
* Starting configure network device security [ OK ]
* Starting configure network device security [ OK ]
* Starting Signal sysvinit that the rootfs is mounted [ OK ]
* Starting Mount network filesystems [ OK ]
* Starting configure network device [ OK ]
* Starting Clean /tmp directory [ OK ]
* Stopping Mount network filesystems [ OK ]
* Stopping Clean /tmp directory [ OK ]
* Stopping cold plug devices [ OK ]
* Starting Signal sysvinit that local filesystems are mounted [ OK ]
* Stopping log initial device creation [ OK ]
* Stopping Mount filesystems on boot [ OK ]
* Starting Failsafe Boot Delay [ OK ]
* Starting flush early job output to logs [ OK ]
* Starting configure network device security [ OK ]
* Starting D-Bus system message bus [ OK ]
* Starting userspace bootsplash [ OK ]
* Stopping flush early job output to logs [ OK ]
* Stopping userspace bootsplash [ OK ]
* Starting Send an event to indicate plymouth is up [ OK ]
* Starting configure virtual network devices [ OK ]
* Starting system logging daemon [ OK ]
* Stopping Send an event to indicate plymouth is up [ OK ]
* Starting Mount network filesystems [ OK ]
* Starting configure network device [ OK ]
* Stopping Failsafe Boot Delay [ OK ]
* Starting mDNS/DNS-SD daemon [ OK ]
* Starting System V initialisation compatibility [ OK ]
* Starting Reload cups, upon starting avahi-daemon to make sure remote q[ OK ]are populated
* Starting Reload cups, upon starting avahi-daemon to make sure remote q[fail]are populated
* Stopping Mount network filesystems [ OK ]
* Stopping System V initialisation compatibility [ OK ]
* Starting System V runlevel compatibility [ OK ]
* Starting regular background program processing daemon [ OK ]
* Starting save kernel messages [ OK ]
* Stopping System V runlevel compatibility [ OK ]
* Stopping save kernel messages [ OK ]
* Starting OpenSSH server [ OK ]
[ 757.075069] BUG: soft lockup - CPU#0 stuck for 35s! [swapper/0:0]
Gyungmin Park | +82-10-3465-7507 | R&D Office, VD Division, SEC
![]() _______________________________________________
MirageOS-devel mailing list
MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel
|
