[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [MirageOS-devel] Setting networking in vagrant virtualbox




On Wed, Apr 20, 2016 at 10:59 AM, Thomas Leonard <talex5@xxxxxxxxx> wrote:

Do you have a firewall running on the host or dom0? Can you connect to
a service running in dom0? What does a tcpdump dump from dom0 show
(e.g. when loaded into wireshark)? 

If you can get IP packets from the host to dom0 and back, and from
dom0 to the unikernel and back, but you can't make the bridge work,
another option is to put the unikernel on a separate network and
enable IP forwarding in dom0.


IP forwarding in dom0 is activated. Actually the issue was simply I forgot to enable promiscuous mode for eth1, the "host-only" network interface in virtualbox.

Thanks for your help

Arnaud
_______________________________________________
MirageOS-devel mailing list
MirageOS-devel@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/mirageos-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.