|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-4.6-testing baseline-only test] 38093: regressions - FAIL
This run is configured for baseline tests only. flight 38093 xen-4.6-testing real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/38093/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-xl-qemut-winxpsp3 9 windows-install fail REGR. vs. 37948 test-amd64-amd64-xl-qemuu-winxpsp3 9 windows-install fail REGR. vs. 37948 Regressions which are regarded as allowable (not blocking): test-amd64-i386-rumpuserxen-i386 15 rumpuserxen-demo-xenstorels/xenstorels.repeat fail REGR. vs. 37948 Tests which did not succeed, but are not blocking: test-armhf-armhf-xl-vhd 9 debian-di-install fail never pass test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail never pass test-armhf-armhf-xl-qcow2 9 debian-di-install fail never pass test-armhf-armhf-libvirt-vhd 9 debian-di-install fail never pass test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass test-armhf-armhf-xl-raw 9 debian-di-install fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 14 guest-saverestore fail never pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm 9 debian-hvm-install fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-armhf-armhf-libvirt 14 guest-saverestore fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl-midway 13 saverestore-support-check fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-midway 12 migrate-support-check fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 saverestore-support-check fail never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-i386-libvirt-raw 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-raw 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qcow2 11 migrate-support-check fail never pass test-amd64-i386-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-libvirt-qcow2 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail never pass version targeted for testing: xen 7472ced461b4c4480a6dee2753a266f98e791456 baseline version: xen 70d63e48077f8fee8eda6d8d95eeda52a34d9077 Last test of basis 37948 2015-09-17 15:18:29 Z 12 days Testing same since 38093 2015-09-28 14:56:15 Z 1 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Chunyan Liu <cyliu@xxxxxxxx> Ian Campbell <ian.campbell@xxxxxxxxxx> Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Julien Grall <julien.grall@xxxxxxxxxx> Kevin Tian <kevin.tian@xxxxxxxxx> Roger Pau Monne <roger.pau@xxxxxxxxxx> Roger Pau Monné <roger.pau@xxxxxxxxxx> Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Tiejun Chen <tiejun.chen@xxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumpuserxen pass build-i386-rumpuserxen pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm fail test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumpuserxen-amd64 pass test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 pass test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumpuserxen-i386 fail test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-armhf-armhf-xl-midway pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-amd64-amd64-libvirt-qcow2 pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-i386-libvirt-qcow2 pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-xl-qcow2 fail test-amd64-i386-xl-qcow2 pass test-amd64-amd64-libvirt-raw pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-libvirt-raw pass test-amd64-amd64-xl-raw pass test-armhf-armhf-xl-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds pass test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-libvirt-vhd fail test-amd64-i386-libvirt-vhd pass test-amd64-amd64-xl-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-i386-xl-vhd pass test-amd64-amd64-xl-qemut-winxpsp3 fail test-amd64-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 fail test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit 7472ced461b4c4480a6dee2753a266f98e791456 Author: Roger Pau Monne <roger.pau@xxxxxxxxxx> Date: Wed Sep 23 12:06:56 2015 +0200 libxl: fix the cleanup of the backend path when using driver domains With the current libxl implementation the control domain will remove both the frontend and the backend xenstore paths of a device that's handled by a driver domain. This is incorrect, since the driver domain possibly needs to access the backend path in order to perform the disconnection and cleanup of the device. Fix this by making sure the control domain only cleans the frontend path, leaving the backend path to be cleaned by the driver domain. Note that if the device is not handled by a driver domain the control domain will perform the removal of both the frontend and the backend paths. Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Reported-by: Alex Velazquez <alex.j.velazquez@xxxxxxxxx> Cc: Alex Velazquez <alex.j.velazquez@xxxxxxxxx> Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Cc: Ian Campbell <ian.campbell@xxxxxxxxxx> Cc: Wei Liu <wei.liu2@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit 546678c6a60f64fb186640460dfa69a837c8fba5) commit fe6a5ad304dde6d724e763518296a40aa2ff484e Author: Roger Pau Monne <roger.pau@xxxxxxxxxx> Date: Wed Sep 23 12:06:55 2015 +0200 libxl: fix devd removal path The current flow of the devd helper (in charge of launching hotplug scripts inside of driver domains) is to wait for the device backend to switch to state 6 (XenbusStateClosed) and then remove it. This is not correct, since a domain can reconnect it's PV devices as many times as it wants. In order to fix this, introduce the following logic: the control domain will set the "online" backend node to 0 when it wants the driver domain to disconnect the device, so now the condition applied in devd is that "state" must be 6 and "online" 0 in order to proceed with the disconnection. Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Reported-by: Alex Velazquez <alex.j.velazquez@xxxxxxxxx> Cc: Alex Velazquez <alex.j.velazquez@xxxxxxxxx> Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Cc: Ian Campbell <ian.campbell@xxxxxxxxxx> Cc: Wei Liu <wei.liu2@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit 5c9a00c57172182652c432e80cc278bebc044dc4) commit 33a04cb2f3f94e594a0cc9dbd0cb077c788ac209 Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Tue Sep 22 21:18:48 2015 +0100 xen/arm: vgic: Correctly emulate write when byte is used When a guest is writing a byte, the value will be located in bits[7:0] of the register. Although the current implementation is expecting the byte at the Nth byte of the register where N = address & 4; When the address is not 4-byte aligned, the corresponding byte in the internal state will always be set to zero rather. Note that byte access are only used for GICD_IPRIORITYR and GICD_ITARGETSR. So the worst things that could happen is not setting the priority correctly and ignore the target vCPU written. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit 3f214fea76acc6cbc1101fe1815cee795483a67d) commit b18491f5ca8e4d2f31501e4575e61d559b419e10 Author: Tiejun Chen <tiejun.chen@xxxxxxxxx> Date: Mon Sep 21 16:08:50 2015 +0200 vtd: correct loglevel when check group devices Since commit 3848058e7dd6 (vtd/iommu: permit group devices to passthrough in relaxed mode) is introduced, we always print message as XENLOG_G_WARNING but its not correct in the case of strict mode. So here is making this message depending on the specific mode. Signed-off-by: Tiejun Chen <tiejun.chen@xxxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> master commit: 92906abbee6d1dc975111a88d83cd3550f71e4c8 master date: 2015-09-16 11:20:54 +0200 commit f9e7b0b7033b8aeabc841f9a4af5985e65d502da Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Thu Sep 17 19:00:03 2015 +0100 xen/arm: vgic-v2: Map the GIC virtual CPU interface with the correct size On GICv2, the GIC virtual CPU interface is at minimum 8KB. Due some to some necessary quirk for GIC using 64KB stride, we are mapping the region in 2 time. The first mapping is 4KB and the second one is 8KB, i.e 12KB in total. Although the minimum supported size (and widely used) is 8KB. This means that we are mapping 4KB more to any guest using GICv2. While this looks scary at first glance, the GIC virtual CPU interface is most frequently at the end the GIC I/O region. So we will most likely map an an unused I/O region or a mirrored version of GICV for platform using 64KB stride. Nonetheless, fix the second mapping to only map 4KB. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit 493a67ee4a3fd9420e94fa2cf108e2a27961202b) commit d880e985b22825b9569e00f83477f42dc45a037a Author: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Date: Tue Sep 15 10:52:14 2015 +0100 libxl: handle read-only drives with qemu-xen The current libxl code doesn't deal with read-only drives at all. Upstream QEMU and qemu-xen only support read-only cdrom drives: make sure to specify "readonly=on" for cdrom drives and return error in case the user requested a non-cdrom read-only drive. This is XSA-142, discovered by Lin Liu (https://bugzilla.redhat.com/show_bug.cgi?id=1257893). Signed-off-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> (cherry picked from commit fa30003c13577b7ae4bbb46252ec1cbabd65c645) commit ab7e499a526337d5b4136a2be4cdfb237f6552d0 Author: Ian Campbell <ian.campbell@xxxxxxxxxx> Date: Thu Sep 17 17:30:50 2015 +0100 INSTALL: Mention MINIOS_UPSTREAM_URL All the other ones seem to be there. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Release-acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> (cherry picked from commit f304da48779ef71bca723619ddf0b3bf6ae15c8a) commit ec6462ed3f60ee16feeea79512f02bac62a29429 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Sep 15 14:54:27 2015 +0100 docs: Migration feature document Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit 112e5346b048712e194fd1f99f1fb7720d10892b) commit 17588f6352d59f8ef74a180faca2be892eb7c49e Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Sep 15 14:54:26 2015 +0100 docs: Template for feature documents Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> (cherry picked from commit d02bed2a3926ca65f6d49eeb034eab00c532d22b) commit 63e3edcc6c5f4ffcee7f0f63a161ba6f58ac99ed Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Wed Sep 16 11:22:00 2015 +0200 x86/sysctl: don't clobber memory if NCAPINTS > ARRAY_SIZE(pi->hw_cap) There is no current problem, as both NCAPINTS and pi->hw_cap are 8 entries, but the limit should be calculated appropriately so as to avoid hypervisor stack corruption if the two do get out of sync. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> (cherry picked from commit c373b912e74659f0e0898ae93e89513694cfd94e) commit 878d9320a8ae70646bdbbe41dfe652b6af7dd4d7 Author: Chunyan Liu <cyliu@xxxxxxxx> Date: Wed Sep 16 14:16:09 2015 +0800 libxl: ensure xs transaction is initialised in libxl__device_pci_add_xenstore Run "xl pci-attach <domain> <pci_device>", the 2nd time fails: xl: libxl_xshelp.c:209: libxl__xs_transaction_start: Assertion `!*t' failed. Aborted To fix that, initialize xs_transaction to avoid libxl__xs_transaction_start assertion error. Signed-off-by: Chunyan Liu <cyliu@xxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> [ ijc -- updated commit message ] (cherry picked from commit 4600d7560425f89b32cd90ecf6084bae9293dfab) commit d892e95616bfce807eac63d0389f03bd1187c0e5 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Wed Sep 16 11:27:40 2015 +0200 x86/MSI: fail if no hardware support This is to guard against buggy callers (luckily Dom0 only) invoking the respective hypercall for a device not being MSI-capable. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Release-acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> master commit: c7d5d5d8ea1ecbd6ef8b47dace4dec825f0f6e48 master date: 2015-09-16 11:20:27 +0200 (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx http://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |