|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-4.5-testing baseline-only test] 38228: regressions - FAIL
This run is configured for baseline tests only. flight 38228 xen-4.5-testing real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/38228/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-xl-qemuu-winxpsp3 16 guest-localmigrate/x10 fail REGR. vs. 38223 Regressions which are regarded as allowable (not blocking): test-amd64-i386-rumpuserxen-i386 15 rumpuserxen-demo-xenstorels/xenstorels.repeat fail REGR. vs. 38223 test-amd64-i386-xl-qemuu-win7-amd64 13 guest-localmigrate fail REGR. vs. 38223 test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 13 guest-localmigrate fail REGR. vs. 38223 test-amd64-i386-xl-qemuu-winxpsp3 13 guest-localmigrate fail REGR. vs. 38223 test-amd64-amd64-xl-rtds 6 xen-boot fail like 38223 test-amd64-amd64-xl-credit2 21 guest-start/debian.repeat fail like 38223 Tests which did not succeed, but are not blocking: test-armhf-armhf-xl-vhd 9 debian-di-install fail never pass test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail never pass test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-armhf-armhf-libvirt 14 guest-saverestore fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-rumpuserxen-amd64 15 rumpuserxen-demo-xenstorels/xenstorels.repeat fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass test-armhf-armhf-xl-midway 12 migrate-support-check fail never pass test-armhf-armhf-xl-midway 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail never pass test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail never pass version targeted for testing: xen d3063bb2b118da2e84707f26a8d173c85a5d8f05 baseline version: xen 47db4b088d18d900b5613ecb872283804320dde9 Last test of basis 38223 2015-10-29 12:55:02 Z 1 days Testing same since 38228 2015-10-30 14:49:52 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Ian Campbell <ian.campbell@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Julien Grall <julien.grall@xxxxxxxxxx> jobs: build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumpuserxen pass build-i386-rumpuserxen pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumpuserxen-amd64 fail test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-credit2 fail test-armhf-armhf-xl-credit2 pass test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumpuserxen-i386 fail test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-armhf-armhf-xl-midway pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds fail test-armhf-armhf-xl-rtds pass test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 fail test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-amd64-xl-qemut-winxpsp3 pass test-amd64-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 fail test-amd64-i386-xl-qemuu-winxpsp3 fail ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit d3063bb2b118da2e84707f26a8d173c85a5d8f05 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Oct 29 14:02:38 2015 +0100 x86: rate-limit logging in do_xen{oprof,pmu}_op() Some of the sub-ops are acessible to all guests, and hence should be rate-limited. In the xenoprof case, just like for XSA-146, include them only in debug builds. Since the vPMU code is rather new, allow them to be always present, but downgrade them to (rate limited) guest messages. This is CVE-2015-7971 / XSA-152. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Ian Campbell <ian.campbell@xxxxxxxxxx> master commit: 95e7415843b94c346e5ba8682665f508f220e04b master date: 2015-10-29 13:37:19 +0100 commit 8dbbba74b38da95ae64ebcf171f88a1b67019f4c Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Oct 29 14:02:14 2015 +0100 xenoprof: free domain's vcpu array This was overlooked in fb442e2171 ("x86_64: allow more vCPU-s per guest"). This is CVE-2015-7969 / XSA-151. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Ian Campbell <ian.campbell@xxxxxxxxxx> master commit: 6e97c4b37386c2d09e09e9b5d5d232e37728b960 master date: 2015-10-29 13:36:52 +0100 commit 0b12f70dfc28b76f7fcfe96116c0760b374ac574 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Thu Oct 29 14:01:47 2015 +0100 x86/PoD: Eager sweep for zeroed pages Based on the contents of a guests physical address space, p2m_pod_emergency_sweep() could degrade into a linear memcmp() from 0 to max_gfn, which runs non-preemptibly. As p2m_pod_emergency_sweep() runs behind the scenes in a number of contexts, making it preemptible is not feasible. Instead, a different approach is taken. Recently-populated pages are eagerly checked for reclaimation, which amortises the p2m_pod_emergency_sweep() operation across each p2m_pod_demand_populate() operation. Note that in the case that a 2M superpage can't be reclaimed as a superpage, it is shattered if 4K pages of zeros can be reclaimed. This is unfortunate but matches the previous behaviour, and is required to avoid regressions (domain crash from PoD exhaustion) with VMs configured close to the limit. This is CVE-2015-7970 / XSA-150. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx> master commit: 101ce53266866144e724ed593173bc4098b300b9 master date: 2015-10-29 13:36:25 +0100 commit fd4d3cfd513ccbc2df795b6da374f2686543f121 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Oct 29 14:00:50 2015 +0100 free domain's vcpu array This was overlooked in fb442e2171 ("x86_64: allow more vCPU-s per guest"). This is CVE-2015-7969 / XSA-149. Reported-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Ian Campbell <ian.campbell@xxxxxxxxxx> master commit: d46896ebbb23f3a9fef2eb6066ae614fd1acfd96 master date: 2015-10-29 13:35:40 +0100 commit d2fa0eeaba32fab85db9046acc2021a9c112051a Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Oct 29 13:59:03 2015 +0100 x86: guard against undue super page PTE creation When optional super page support got added (commit bd1cd81d64 "x86: PV support for hugepages"), two adjustments were missed: mod_l2_entry() needs to consider the PSE and RW bits when deciding whether to use the fast path, and the PSE bit must not be removed from L2_DISALLOW_MASK unconditionally. This is CVE-2015-7835 / XSA-148. Reported-by: "æ ¾å°?è?ª(好é£?)" <shangcong.lsc@xxxxxxxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Tim Deegan <tim@xxxxxxx> master commit: fe360c90ea13f309ef78810f1a2b92f2ae3b30b8 master date: 2015-10-29 13:35:07 +0100 commit b6ee6267a404131a3d1e797fb70e8c617b9de92d Author: Ian Campbell <ian.campbell@xxxxxxxxxx> Date: Thu Oct 29 13:58:38 2015 +0100 arm: handle races between relinquish_memory and free_domheap_pages Primarily this means XENMEM_decrease_reservation from a toolstack domain. Unlike x86 we have no requirement right now to queue such pages onto a separate list, if we hit this race then the other code has already fully accepted responsibility for freeing this page and therefore there is no more for relinquish_memory to do. This is CVE-2015-7814 / XSA-147. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Reviewed-by: Julien Grall <julien.grall@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 1ef01396fdff88b1c3331a09ca5c69619b90f4ea master date: 2015-10-29 13:34:17 +0100 commit 659e934fb0bf3a040ffa529ebf379a9140e8beab Author: Ian Campbell <ian.campbell@xxxxxxxxxx> Date: Thu Oct 29 13:58:15 2015 +0100 arm: rate-limit logging from unimplemented PHYSDEVOP and HVMOP. These are guest accessible and should therefore be rate-limited. Moreover, include them only in debug builds. This is CVE-2015-7813 / XSA-146. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 1c0e59ff15764e7b0c59282365974f5b8924ce83 master date: 2015-10-29 13:33:38 +0100 commit 41dd3b8e73deafa0b05289d0430731ce2937d386 Author: Julien Grall <julien.grall@xxxxxxxxxx> Date: Thu Oct 29 13:57:48 2015 +0100 arm: Support hypercall_create_continuation for multicall Multicall for ARM has been supported since commit f0dbdc6 "xen: arm: fully implement multicall interface.". Although, if an hypercall in multicall requires preemption, it will crash the host: (XEN) Xen BUG at domain.c:347 (XEN) ----[ Xen-4.7-unstable arm64 debug=y Tainted: C ]---- [...] (XEN) Xen call trace: (XEN) [<00000000002420cc>] hypercall_create_continuation+0x64/0x380 (PC) (XEN) [<0000000000217274>] do_memory_op+0x1b00/0x2334 (LR) (XEN) [<0000000000250d2c>] do_multicall_call+0x114/0x124 (XEN) [<0000000000217ff0>] do_multicall+0x17c/0x23c (XEN) [<000000000024f97c>] do_trap_hypercall+0x90/0x12c (XEN) [<0000000000251ca8>] do_trap_hypervisor+0xd2c/0x1ba4 (XEN) [<00000000002582cc>] guest_sync+0x88/0xb8 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 5: (XEN) Xen BUG at domain.c:347 (XEN) **************************************** (XEN) (XEN) Manual reset required ('noreboot' specified) Looking to the code, the support of multicall looks valid to me, as we only need to fill call.args[...]. So drop the BUG(); This is CVE-2015-7812 / XSA-145. Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx> master commit: 29bcf64ce8bc0b1b7aacd00c8668f255c4f0686c master date: 2015-10-29 13:31:10 +0100 (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx http://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |