|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-4.5-testing baseline-only test] 38530: regressions - FAIL
This run is configured for baseline tests only. flight 38530 xen-4.5-testing real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/38530/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-xl-qemuu-win7-amd64 15 guest-localmigrate/x10 fail REGR. vs. 38500 test-amd64-amd64-xl-qemuu-winxpsp3 9 windows-install fail REGR. vs. 38500 test-amd64-amd64-xl-qemut-winxpsp3 9 windows-install fail REGR. vs. 38500 Regressions which are regarded as allowable (not blocking): test-amd64-amd64-xl-rtds 6 xen-boot fail like 38500 test-amd64-amd64-xl-credit2 19 guest-start/debian.repeat fail like 38500 Tests which did not succeed, but are not blocking: test-armhf-armhf-xl-vhd 9 debian-di-install fail never pass test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail never pass test-amd64-amd64-rumpuserxen-amd64 15 rumpuserxen-demo-xenstorels/xenstorels.repeat fail never pass test-armhf-armhf-libvirt 14 guest-saverestore fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-xl-pvh-intel 11 guest-start fail never pass test-armhf-armhf-xl-midway 12 migrate-support-check fail never pass test-armhf-armhf-xl-midway 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 12 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail never pass test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail never pass test-amd64-amd64-xl-qemut-win7-amd64 16 guest-stop fail never pass test-amd64-i386-xl-qemut-win7-amd64 16 guest-stop fail never pass version targeted for testing: xen 4c11414775a28ccd29a33c62cd89e202feb631d7 baseline version: xen a84cecd5c70e5db264ad94cbb29af26e6d1b7c40 Last test of basis 38500 2015-12-11 14:54:58 Z 6 days Testing same since 38530 2015-12-17 18:55:32 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Daniel Kiper <daniel.kiper@xxxxxxxxxx> Dario Faggioli <dario.faggioli@xxxxxxxxxx> David Vrabel <david.vrabel@xxxxxxxxxx> Haozhong Zhang <haozhong.zhang@xxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Kevin Tian <kevin.tian@xxxxxxxxx> jobs: build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumpuserxen pass build-i386-rumpuserxen pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumpuserxen-amd64 fail test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-credit2 fail test-armhf-armhf-xl-credit2 pass test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumpuserxen-i386 pass test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-armhf-armhf-xl-midway pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds fail test-armhf-armhf-xl-rtds pass test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-amd64-xl-qemut-winxpsp3 fail test-amd64-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 fail test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit 4c11414775a28ccd29a33c62cd89e202feb631d7 Author: Haozhong Zhang <haozhong.zhang@xxxxxxxxx> Date: Tue Dec 15 15:40:18 2015 +0100 x86/time: fix domain type check in tsc_set_info() Replace is_hvm_domain() in tsc_set_info() by has_hvm_container_domain() to keep consistent with other domain type checks in tsc_set_info(). Signed-off-by: Haozhong Zhang <haozhong.zhang@xxxxxxxxx> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> master commit: 3c80d6f3c61eb0f8072f70b0a9a8c8c7adf17572 master date: 2015-12-08 09:46:30 +0100 commit d11d0df41f9b2614689a39b360916338497f225b Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Dec 15 15:39:52 2015 +0100 VT-d: drop unneeded Ivybridge quirk workaround We've been told by Intel that server chipsets don't need the workaround anymore starting with Ivybridge (Xeon E5/E7 v2); the second half of the workaround was missing anyway. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> master commit: a10307b3912e65bbdd9184ba5fe849d252b75f92 master date: 2015-12-03 15:33:10 +0100 commit 74b7f4631e72a6381d39021a8d9d60f40e29ef9d Author: David Vrabel <david.vrabel@xxxxxxxxxx> Date: Tue Dec 15 15:39:20 2015 +0100 evtchn: don't reuse ports that are still "busy" When using the FIFO ABI a guest may close an event channel that is still LINKED. If this port is reused, subsequent events may be lost because they may become pending on the wrong queue. This could be fixed by requiring guests to only close event channels that are not linked. This is difficult since: a) irq cleanup in the guest may be done in a context that cannot wait for the event to be unlinked; b) the guest may attempt to rebind a PIRQ whose previous close is still pending; and c) existing guests already have the problematic behaviour. Instead, simply check a port is not "busy" (i.e., it's not linked) before reusing it. Guests should still drain any queues for VCPUs that are being offlined, or the port will become unusable until the VCPU is onlined and starts processing events again. Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 78e24c269b0a4a8b864ece725e6d4209ed95dfa7 master date: 2015-12-02 15:21:46 +0100 commit 4c8859ec553bde224ac9841880caf40fb7c7e80e Author: David Vrabel <david.vrabel@xxxxxxxxxx> Date: Tue Dec 15 15:38:38 2015 +0100 x86/ept: remove unnecessary sync after resolving misconfigured entries When using EPT, type changes are done with the following steps: 1. Set entry as invalid (misconfigured) by settings a reserved memory type. 2. Flush all EPT and combined translations (ept_sync_domain()). 3. Fixup misconfigured entries as required (on EPT_MISCONFIG vmexits or when explicitly setting an entry. Since resolve_misconfig() only updates entries that were misconfigured, there is no need to invalidate any translations since the hardware does not cache misconfigured translations (vol 3, section 28.3.2). Remove the unnecessary (and very expensive) ept_sync_domain() calls). Signed-off-by: David Vrabel <david.vrabel@xxxxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> master commit: cea357ba4b3335ca5279ee9c00838f85575d5842 master date: 2015-12-02 15:19:53 +0100 commit 7c56b094d4c320b0b0afb41236c162d1f02b8995 Author: Daniel Kiper <daniel.kiper@xxxxxxxxxx> Date: Tue Dec 15 15:37:55 2015 +0100 x86/boot: check for not allowed sections before linking Currently check for not allowed sections is performed just after compilation. However, if compilation succeeds and check fails then second build will create xen.gz/xen.efi without any visible error. This happens because %.o: %.c recipe created object file during first run and make do not execute this recipe during second run. So, look for not allowed sections before linking. This way check will be executed every time. Signed-off-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: d380b3559734739ae009cd3c0e9aabb5602863e2 master date: 2015-11-25 17:24:36 +0100 commit fea50c0f1d792603d576cd1270d18ad48718ee81 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Dec 15 15:37:24 2015 +0100 x86/vPMU: document as unsupported This is XSA-163. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: c03480cf5c4e96fb4afb2237ad0a3cac7162564a master date: 2015-11-24 18:32:20 +0100 commit 413d59f3e1873fcbc3e67aca8c3a815b0f49cf08 Author: Dario Faggioli <dario.faggioli@xxxxxxxxxx> Date: Tue Dec 15 15:36:26 2015 +0100 sched: fix locking for insert_vcpu() in credit1 and RTDS The insert_vcpu() hook is handled with inconsistent locking. In fact, schedule_cpu_switch() calls the hook with runqueue lock held, while sched_move_domain() relies on the hook implementations to take the lock themselves (and, since that is not done in Credit1 and RTDS, such operation is not safe in those cases). This is fixed as follows: - take the lock in the hook implementations, in specific schedulers' code; - avoid calling insert_vcpu(), for the idle vCPU, in schedule_cpu_switch(). In fact, idle vCPUs are set to run immediately, and the various schedulers won't insert them in their runqueues anyway, even when explicitly asked to. While there, still in schedule_cpu_switch(), locking with _irq() is enough (there's no need to do *_irqsave()). Signed-off-by: Dario Faggioli <dario.faggioli@xxxxxxxxxx> Reviewed-by: Meng Xu <mengxu@xxxxxxxxxxxxx> Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx> master commit: ae2f41e3d7e7798537b7ea6dbb9a0c6aeb1179e3 master date: 2015-11-24 14:48:34 +0100 commit ec70614e30f5b38cc958fcf2c034a7d58dcc5190 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Dec 15 15:36:01 2015 +0100 VMX: fix/adjust trap injection In the course of investigating the 4.1.6 backport issue of the XSA-156 patch I realized that #DB injection has always been broken, but with it now getting always intercepted the problem has got worse: Documentation clearly states that neither DR7.GD nor DebugCtl.LBR get cleared before the intercept, so this is something we need to do before reflecting the intercepted exception. While adjusting this (and also with 4.1.6's strange use of X86_EVENTTYPE_SW_EXCEPTION for #DB in mind) I further realized that the special casing of individual vectors shouldn't be done for software interrupts (resulting from INT $nn). And then some code movement: Setting of CR2 for #PF can be done in the same switch() statement (no need for a separate if()), and reading of intr_info is better done close the the consumption of the variable (allowing the compiler to generate better code / use fewer registers for variables). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> master commit: 81a28f14009f4d8577a81b28dd06f6828112054b master date: 2015-11-24 12:30:31 +0100 commit f44b5428a4394c3191c25940f779cd13e27a2501 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Tue Dec 15 15:35:28 2015 +0100 x86/HVM: don't inject #DB with error code Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper@xxxxxxxxxx> master commit: 057e0e72d2a5d598087c5f167ec6a13203a3cf65 master date: 2015-11-12 16:59:18 +0100 commit 96aaf7e6f24631df3f9ed3dda7a53ebed1fbee85 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Dec 15 15:34:29 2015 +0100 x86/vmx: improvements to vmentry failure handling Combine the almost identical vm_launch_fail() and vm_resume_fail() into a single vmx_vmentry_failure(). Re-save all GPRs so that domain_crash() prints the real register values, rather than the stack frame of the vmx_vmentry_failure() call. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Kevin Tian <kevin.tian@xxxxxxxxx> master commit: bbcf0b218f64b1e3e2b66b0fbb623f51d9014e81 master date: 2015-11-03 18:14:02 +0100 commit 92bea0a4d1a2517142c2ccc0482fc16f4c0dc6d1 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Dec 15 15:33:17 2015 +0100 x86/PoD: Make p2m_pod_empty_cache() restartable This avoids a long running operation when destroying a domain with a large PoD cache. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx> master commit: 59a5061723ba47c0028cf48487e5de551c42a378 master date: 2015-11-02 15:33:38 +0100 (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx http://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |