|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [libvirt test] 85777: regressions - trouble: broken/fail/pass
flight 85777 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/85777/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-libvirt-pair 4 host-install/dst_host(4) broken REGR. vs. 85689 test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail REGR. vs. 85689 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 14 guest-saverestore fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-armhf-armhf-libvirt 14 guest-saverestore fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 13 guest-saverestore fail never pass test-armhf-armhf-libvirt-raw 11 migrate-support-check fail never pass version targeted for testing: libvirt cf091094a42a2b43f8a3ea80694a784e6f2b4a47 baseline version: libvirt eff43d9abac0e0df9779ee412b7aeaccea8f6e2a Last test of basis 85689 2016-03-08 04:21:47 Z 1 days Testing same since 85777 2016-03-09 04:24:39 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrea Bolognani <abologna@xxxxxxxxxx> Jiri Denemark <jdenemar@xxxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-amd64-amd64-libvirt-pair broken test-amd64-i386-libvirt-pair pass test-armhf-armhf-libvirt-qcow2 fail test-armhf-armhf-libvirt-raw fail test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-step test-amd64-amd64-libvirt-pair host-install/dst_host(4) Not pushing. ------------------------------------------------------------ commit cf091094a42a2b43f8a3ea80694a784e6f2b4a47 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Feb 18 00:12:33 2016 +0100 qemu: Add support for job completed event Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit f28930018173e4dd2ae32a8f242ea109fe7ed83e Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Wed Feb 17 21:20:11 2016 +0100 Introduce job completed event The VIR_DOMAIN_EVENT_ID_JOB_COMPLETED event will be triggered once a job (such as migration) finishes and it will contain statistics for the job as one would get by calling virDomainGetJobStats. Thanks to this event it is now possible to get statistics of a completed migration of a transient domain on the source host. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit a2374edf08446c173a20d96d1b1a436883878c81 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Tue Feb 23 12:40:47 2016 +0100 qemu: Do not report completed stats until the job finishes We would happily report and free statistics of a completed migration even before it actually completed (on the source host while migration is in the Finish phase). Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit cb483a68fdc3503efc9b0996570e58aaf0c11c17 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Tue Feb 23 10:47:01 2016 +0100 qemu: Fix a race when computing migration downtime Computing a total downtime during a migration requires us to store a time stamp when guest CPUs get stopped. The value (and all other statistics) is then transferred to the destination to compute the downtime. Because the stopped time stamp is stored by a STOP event handler while the statistics which will be sent over to the destination are copied synchronously within qemuMigrationWaitForCompletion. Depending on the timing of STOP and MIGRATION events, we may end up copying (and transferring) statistics without the stopped time stamp set. Let's make sure we always use the correct time stamp. https://bugzilla.redhat.com/show_bug.cgi?id=1282744 Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit 315808e99ec09d3894e79007728a70d891b5e02e Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Tue Jan 5 22:19:28 2016 +0100 qemu: Don't explicitly stop CPUs after migration With a very old QEMU which doesn't support events we need to explicitly call qemuMigrationSetOffline at the end of migration to update our internal state. On the other hand, if we talk to QEMU using QMP, we should just wait for the STOP event and let the event handler update the state and trigger a libvirt event. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit 5d01e8666b8119779d11f0aa58b8521d14a164ea Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Feb 18 14:44:48 2016 +0100 qemu: Properly update completed migration stats We should not overwrite all migration statistics on the source with the numbers sent by the destination since the source may have an updated view in some cases (such as post-copy migration). It's safer to update just the timing info we need to get from the destination and be prepared for the future. And we should only do all this after a successful migration. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit e031560e8719ee44bcedcc02019f13169858b8a3 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Feb 18 14:02:15 2016 +0100 qemu: Store completed stats at the very end of migration Statistics for a completed migration only make sense if the migration was successful. Let's not store them in priv->job.completed until we are sure it was a success. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> commit 12a1631440c8db098bf4cba16e3fd4aca09951c4 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Feb 25 14:50:54 2016 +0100 hostdev: Remove explicit NULL checks NULL checks are performed implicitly in the rest of the module, including other allocations in the very same function. commit a54de18a54facae8320e9fa9f927ffc31e240f08 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Feb 24 13:44:09 2016 +0100 hostdev: Fix indentation commit a67b14a97516e796ecbb1da0b5a9b81985c645a0 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Mon Mar 7 14:14:54 2016 +0100 hostdev: Remove inaccurate comment The comment claimed that virPCIDeviceReattach() does not reattach a device to the host driver; except it actually does, so the comment is just confusing and we're better off removing it. commit be70acb7886d48811cec7030607122418ae76402 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Mon Feb 22 15:02:23 2016 +0100 hostdev: Make comments easier to change later Replace the term "loop" with the more generic "step". This allows us to be more flexible and eg. have a step that consists in a single function call. Don't include the number of steps in the first comment of the function, so that we can add or remove steps without having to worry about keeping that comment in sync. For the same reason, remove the summary contained in that comment. Clean up some weird vertical spacing while we're at it. commit 3632185617ddafd3ba7fdf652763cc8a97cbafaf Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Thu Mar 3 16:13:04 2016 +0100 tests: hostdev: Group test cases Instead of considering each single step its own test case, create high level test cases that reproduce a certain scenario. commit f8388cdce453be0fb9113edc312ac45e2ef59142 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Mar 2 15:33:18 2016 +0100 tests: hostdev: Add more checks on list size Always call CHECK_LIST_COUNT() to check the size of both the active and inactive devices list. commit 4a9ea5048c409dce72c6b0e9e8fd9fb268457bb3 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Mar 2 15:27:06 2016 +0100 tests: hostdev: Use size_t for count variables virPCIDeviceListCount()'s return type is size_t, so variables that store its return value should be of that type. commit ff087d8daefd6395f600dec27785b79edb662f69 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Mar 2 15:23:51 2016 +0100 tests: hostdev: Move variable declaration inside CHECK_LIST_COUNT() The 'actualCount' variable, formerly just 'count', is only used internally by the macro, so it's better to move its declaration inside the macro as well: this way, it doesn't have to be declared by every single user. The new name is less generic to make clashes less likely. commit dd9f8e0292dbcc44563a1a1adb02c929f60ad28e Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Mar 2 15:15:07 2016 +0100 tests: hostdev: Use better variable names Change the extremely generic count1 and count2 to the more descriptive active_count and inactive_count. commit 9f506fdb6be8a2d7b6b52b28eb65bfac7e040eb1 Author: Andrea Bolognani <abologna@xxxxxxxxxx> Date: Wed Mar 2 13:17:08 2016 +0100 tests: hostdev: Remove magic numbers When checking the number of devices added to a device list, use the nhostdevs variable instead of its value, so that the test can keep working even if more hostdevs are added. commit 18f231e6ff953c014f4ef0a75da7bf20c4f35de9 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Sat Mar 5 12:59:45 2016 +0100 _virtualboxCreateMachine: Avoid unbounded stack If the stars are in the right position and you're building with VBox >= 4.2.0 it will happen that compiler thinks an array allocated on the stack may be unbounded: In file included from vbox/vbox_V4_2.c:13:0: vbox/vbox_tmpl.c: In function '_virtualboxCreateMachine': vbox/vbox_tmpl.c:2811:1: error: stack usage might be unbounded [-Werror=stack-usage=] _virtualboxCreateMachine(vboxGlobalData *data, virDomainDefPtr def, IMachine **machine, char *uuidstr ATTRIBUTE_UNUSED) ^ Well, given how the variable is declared, I had some hard time seeing it is actually bounded. Surprisingly compiler does not complain because of -Wframe-larger-than. This is because variable length arrays do not count into that warning. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx http://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |