|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [ovmf baseline-only test] 67848: all pass
This run is configured for baseline tests only. flight 67848 ovmf real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/67848/ Perfect :-) All tests in this flight passed as required version targeted for testing: ovmf f6c8e67db9233562fd3ddc6bf7d23f0bb5fb115b baseline version: ovmf f9c3b1b5343f53705f1ab72c55c1db440b01f36f Last test of basis 67846 2016-10-07 22:50:43 Z 0 days Testing same since 67848 2016-10-08 04:50:27 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Michael Kinney <michael.d.kinney@xxxxxxxxx> jobs: build-amd64-xsm pass build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit f6c8e67db9233562fd3ddc6bf7d23f0bb5fb115b Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Mon Oct 3 11:16:46 2016 -0700 QuarkPlatformPkg/RecoveryOemHookLib: Remove RecoveryOemHookLib Remove the RecoveryOemHookLib class and instance that is no longer used by any modules. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 963236092b48013e34c5c889ae4c90b34bd8aef5 Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Mon Oct 3 11:16:19 2016 -0700 QuarkPlatformPkg: Add ForceRecovery UEFI application https://bugzilla.tianocore.org/show_bug.cgi?id=138 Add the ForceRecovery UEFI application to the Quark.dsc file so this application can be put onto an SD card or USB drive to test the Galileo firmware recovery feature. The library mappings to the RecoveryOemHookLib are also removed becuse this library is not longer used by any modules. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 8ac6966704fe2d7bfa62a826da3927f860e0b241 Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Mon Oct 3 11:15:02 2016 -0700 QuarkPlatformPkg/PlatformHelperLib: Remove PlatformDebugPortGetChar8() Remove the library function PlatformDebugPortGetChar8() from the PlatformHelperLib that is no longer used by any modules. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 69a0854b8fa8317dcf459c6e753fefa3a89340e6 Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Mon Oct 3 11:13:42 2016 -0700 QuarkPlatformPkg/PlatformInit: Fix recovery detection issues https://bugzilla.tianocore.org/show_bug.cgi?id=137 https://bugzilla.tianocore.org/show_bug.cgi?id=139 There are four supported methods to generate a boot mode of BOOT_IN_RECOVERY_MODE on the Galileo platforms: * Detect a corrupt FV * Detect a forced recovery from the ForceRecovery UEFI application that sets a bit in a sticky R/W register * The RESET button for the Arduino shield is held while the system is powered up * The RESET button for the Arduino shield is held while the system is rebooted using the REBOOT button. The logic in the PlatformInit module is cleaned up and updated to support all three of the recovery detection methods. The clean ups include: * Remove extra debug messages * Remove user input from serial port In addition, once one of the recovery methods is detected and a boot mode of BOOT_IN_RECOVERY_MODE is set, the Galileo platforms would get an error attempting to use the USB host controller to detect and read a recovery image from a USB drive. The issue is the IMR protection registers are programmed to prevent DMA to memory owned by the PEI Core. The IMR register programming is updated to allow DMA to memory that is allocated by the recovery modules using the PEI AllocatePages() service. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 9c3dea8ddab0272729d106ab0fda632fd63ec2ec Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Mon Oct 3 11:09:58 2016 -0700 QuarkPlatformPkg/ForceRecovery: Add UEFI application to force recovery https://bugzilla.tianocore.org/show_bug.cgi?id=138 This UEFI Application sets a sticky bit that persists across reset to force a boot mode of BOOT_IN_RECOVERY_MODE. It then performs a warm reset using the UEFI Runtime Service ResetSystem(). Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 5f82e02a4b40f25462f0d592e85071bdeb80a2bd Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Tue Oct 4 10:55:24 2016 -0700 QuarkSocPkg/QncSmmDispatcher: Fix use after free issue Update Quark North Cluster SMM dispatcher logic to handle case where an SMI handler unregisters itself. https://bugzilla.tianocore.org/show_bug.cgi?id=51 This issue was reproduced using the unit test at: https://github.com/mdkinney/edk2/tree/Bug51/Reproduce An ASSERT() is generated the 4th time the periodic SMI handler is triggered when the periodic SMI handler unregisters itself. After applying this patch, the DEBUG() message from the periodic SMI handler in this unit test is generated 4 times, the periodic SMI handler is unregistered, and the UEFI Shell works as expected. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> commit 29f169d17a0f09cd1e05c984da5965e08f2b696e Author: Michael Kinney <michael.d.kinney@xxxxxxxxx> Date: Tue Oct 4 20:03:24 2016 -0700 QuarkSocPkg/QncSmmDispatcher: Fix context passed to SMI handlers https://bugzilla.tianocore.org/show_bug.cgi?id=136 1) Add CallbackContext field to the DATABASE_RECORD structure that is set to the RegisterContent value passed to QNCSmmCoreRegister(). This is the content that must be passed to the SMI handler when its source is triggered. 2) Update usage of ChildContext field in the DATABASE_RECOD to use CopyMem() instead of structure assignments to avoid compiler use of memcpy() intrinsics This issue was reproduced using the unit test at: https://github.com/mdkinney/edk2/tree/Bug51/Reproduce An ASSERT() is generated the first time the periodic SMI handler is triggered. After applying this patch, the DEBUG() messages from the periodic SMI handler in this unit test are generated. Cc: Kelly Steele <kelly.steele@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Michael Kinney <michael.d.kinney@xxxxxxxxx> Reviewed-by: Kelly Steele <kelly.steele@xxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |