|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [linux-4.1 test] 101737: regressions - FAIL
flight 101737 linux-4.1 real [real] http://logs.test-lab.xenproject.org/osstest/logs/101737/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-libvirt 13 saverestore-support-check fail REGR. vs. 101401 test-armhf-armhf-libvirt-xsm 13 saverestore-support-check fail REGR. vs. 101401 test-armhf-armhf-xl-multivcpu 15 guest-start/debian.repeat fail REGR. vs. 101401 test-armhf-armhf-libvirt-qcow2 12 saverestore-support-check fail in 101687 REGR. vs. 101401 Tests which are failing intermittently (not blocking): test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm 9 debian-hvm-install fail in 101687 pass in 101737 test-armhf-armhf-xl-credit2 11 guest-start fail pass in 101687 test-armhf-armhf-libvirt-qcow2 9 debian-di-install fail pass in 101687 test-armhf-armhf-xl-cubietruck 11 guest-start fail pass in 101715 test-armhf-armhf-xl-xsm 11 guest-start fail pass in 101715 test-armhf-armhf-xl-rtds 11 guest-start fail pass in 101715 Regressions which are regarded as allowable (not blocking): test-armhf-armhf-libvirt-xsm 15 guest-start/debian.repeat fail blocked in 101401 test-armhf-armhf-xl-credit2 15 guest-start/debian.repeat fail in 101687 like 101401 test-armhf-armhf-xl-cubietruck 15 guest-start/debian.repeat fail in 101715 like 101401 test-armhf-armhf-xl-xsm 15 guest-start/debian.repeat fail in 101715 like 101401 test-armhf-armhf-xl-rtds 15 guest-start/debian.repeat fail in 101715 like 101401 test-armhf-armhf-xl 15 guest-start/debian.repeat fail like 101401 test-amd64-i386-xl-qemuu-win7-amd64 16 guest-stop fail like 101401 test-amd64-i386-xl-qemut-win7-amd64 16 guest-stop fail like 101401 test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-stop fail like 101401 test-amd64-amd64-xl-qemut-win7-amd64 16 guest-stop fail like 101401 test-armhf-armhf-xl-vhd 9 debian-di-install fail like 101401 Tests which did not succeed, but are not blocking: test-amd64-amd64-rumprun-amd64 1 build-check(1) blocked n/a test-amd64-i386-rumprun-i386 1 build-check(1) blocked n/a test-armhf-armhf-xl-credit2 12 migrate-support-check fail in 101687 never pass test-armhf-armhf-xl-credit2 13 saverestore-support-check fail in 101687 never pass test-armhf-armhf-libvirt-qcow2 11 migrate-support-check fail in 101687 never pass test-armhf-armhf-xl-cubietruck 12 migrate-support-check fail in 101715 never pass test-armhf-armhf-xl-cubietruck 13 saverestore-support-check fail in 101715 never pass test-armhf-armhf-xl-xsm 12 migrate-support-check fail in 101715 never pass test-armhf-armhf-xl-xsm 13 saverestore-support-check fail in 101715 never pass test-armhf-armhf-xl-rtds 12 migrate-support-check fail in 101715 never pass test-armhf-armhf-xl-rtds 13 saverestore-support-check fail in 101715 never pass build-i386-rumprun 7 xen-build fail never pass build-amd64-rumprun 7 xen-build fail never pass test-amd64-amd64-xl-pvh-amd 11 guest-start fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-xl-pvh-intel 14 guest-saverestore fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 12 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 13 saverestore-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 16 debian-hvm-install/l1/l2 fail never pass test-armhf-armhf-xl 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 12 migrate-support-check fail never pass test-armhf-armhf-xl 13 saverestore-support-check fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 saverestore-support-check fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 9 debian-di-install fail never pass version targeted for testing: linux 9ca365c0c8bdd8552ec064f0e696600cf7ea66dd baseline version: linux 91473db3a3257eacead8f4d84cf4bc96c447193f Last test of basis 101401 2016-10-12 15:06:53 Z 16 days Testing same since 101649 2016-10-24 18:21:35 Z 4 days 6 attempts ------------------------------------------------------------ People who touched revisions under test: Christopher S. Hall <christopher.s.hall@xxxxxxxxx> Daniel J Blueman <daniel@xxxxxxxxx> Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Hugh Dickins <hughd@xxxxxxxxxx> John Stultz <john.stultz@xxxxxxxxxx> Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Sasha Levin <alexander.levin@xxxxxxxxxxx> Thomas Gleixner <tglx@xxxxxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumprun fail build-i386-rumprun fail test-amd64-amd64-xl pass test-armhf-armhf-xl fail test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-armhf-armhf-xl-xsm fail test-amd64-i386-xl-xsm pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvh-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumprun-amd64 blocked test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 fail test-armhf-armhf-xl-cubietruck fail test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumprun-i386 blocked test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvh-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu fail test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-armhf-armhf-libvirt-qcow2 fail test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw fail test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds fail test-amd64-i386-xl-qemut-winxpsp3-vcpus1 pass test-amd64-i386-xl-qemuu-winxpsp3-vcpus1 pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd fail test-amd64-amd64-xl-qemut-winxpsp3 pass test-amd64-i386-xl-qemut-winxpsp3 pass test-amd64-amd64-xl-qemuu-winxpsp3 pass test-amd64-i386-xl-qemuu-winxpsp3 pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 9ca365c0c8bdd8552ec064f0e696600cf7ea66dd Author: Sasha Levin <alexander.levin@xxxxxxxxxxx> Date: Sat Oct 22 16:05:53 2016 -0400 Linux 4.1.35 Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> commit 3b244a6e53dc33f6701bfde8601d7677c0c6e9e8 Author: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Date: Fri Dec 11 14:38:06 2015 +0200 xhci: fix usb2 resume timing and races. [ Upstream commit f69115fdbc1ac0718e7d19ad3caa3da2ecfe1c96 ] According to USB 2 specs ports need to signal resume for at least 20ms, in practice even longer, before moving to U0 state. Both host and devices can initiate resume. On device initiated resume, a port status interrupt with the port in resume state in issued. The interrupt handler tags a resume_done[port] timestamp with current time + USB_RESUME_TIMEOUT, and kick roothub timer. Root hub timer requests for port status, finds the port in resume state, checks if resume_done[port] timestamp passed, and set port to U0 state. On host initiated resume, current code sets the port to resume state, sleep 20ms, and finally sets the port to U0 state. This should also be changed to work in a similar way as the device initiated resume, with timestamp tagging, but that is not yet tested and will be a separate fix later. There are a few issues with this approach 1. A host initiated resume will also generate a resume event. The event handler will find the port in resume state, believe it's a device initiated resume, and act accordingly. 2. A port status request might cut the resume signalling short if a get_port_status request is handled during the host resume signalling. The port will be found in resume state. The timestamp is not set leading to time_after_eq(jiffies, timestamp) returning true, as timestamp = 0. get_port_status will proceed with moving the port to U0. 3. If an error, or anything else happens to the port during device initiated resume signalling it will leave all the device resume parameters hanging uncleared, preventing further suspend, returning -EBUSY, and cause the pm thread to busyloop trying to enter suspend. Fix this by using the existing resuming_ports bitfield to indicate that resume signalling timing is taken care of. Check if the resume_done[port] is set before using it for timestamp comparison, and also clear out any resume signalling related variables if port is not in U0 or Resume state This issue was discovered when a PM thread busylooped, trying to runtime suspend the xhci USB 2 roothub on a Dell XPS Cc: stable <stable@xxxxxxxxxxxxxxx> Reported-by: Daniel J Blueman <daniel@xxxxxxxxx> Tested-by: Daniel J Blueman <daniel@xxxxxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> commit c865f98df72112a3997b219bf711bc46c1e90706 Author: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Date: Thu Oct 13 13:07:36 2016 -0700 mm: remove gup_flags FOLL_WRITE games from __get_user_pages() [ Upstream commit 19be0eaffa3ac7d8eb6784ad9bdbc7d67ed8e619 ] This is an ancient bug that was actually attempted to be fixed once (badly) by me eleven years ago in commit 4ceb5db9757a ("Fix get_user_pages() race for write access") but that was then undone due to problems on s390 by commit f33ea7f404e5 ("fix get_user_pages bug"). In the meantime, the s390 situation has long been fixed, and we can now fix it by checking the pte_dirty() bit properly (and do it better). The s390 dirty bit was implemented in abf09bed3cce ("s390/mm: implement software dirty bits") which made it into v3.9. Earlier kernels will have to look at the page state itself. Also, the VM has become more scalable, and what used a purely theoretical race back then has become easier to trigger. To fix it, we introduce a new internal FOLL_COW flag to mark the "yes, we already did a COW" rather than play racy games with FOLL_WRITE that is very fundamental, and then use the pte dirty flag to validate that the FOLL_COW flag is still valid. Reported-and-tested-by: Phil "not Paul" Oester <kernel@xxxxxxxxxxxx> Acked-by: Hugh Dickins <hughd@xxxxxxxxxx> Reviewed-by: Michal Hocko <mhocko@xxxxxxxx> Cc: Andy Lutomirski <luto@xxxxxxxxxx> Cc: Kees Cook <keescook@xxxxxxxxxxxx> Cc: Oleg Nesterov <oleg@xxxxxxxxxx> Cc: Willy Tarreau <w@xxxxxx> Cc: Nick Piggin <npiggin@xxxxxxxxx> Cc: Greg Thelen <gthelen@xxxxxxxxxx> Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> commit 4edf04a3a307195be345f8189e37501ac247f68b Author: John Stultz <john.stultz@xxxxxxxxxx> Date: Tue Oct 4 19:55:48 2016 -0700 timekeeping: Fix __ktime_get_fast_ns() regression [ Upstream commit 58bfea9532552d422bde7afa207e1a0f08dffa7d ] In commit 27727df240c7 ("Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING"), I changed the logic to open-code the timekeeping_get_ns() function, but I forgot to include the unit conversion from cycles to nanoseconds, breaking the function's output, which impacts users like perf. This results in bogus perf timestamps like: swapper 0 [000] 253.427536: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426573: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426687: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426800: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.426905: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427022: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427127: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427239: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427346: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 254.427463: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 255.426572: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Instead of more reasonable expected timestamps like: swapper 0 [000] 39.953768: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.064839: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.175956: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.287103: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.398217: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.509324: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.620437: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.731546: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.842654: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 40.953772: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) swapper 0 [000] 41.064881: 111111111 cpu-clock: ffffffff810a0de6 native_safe_halt+0x6 ([kernel.kallsyms]) Add the proper use of timekeeping_delta_to_ns() to convert the cycle delta to nanoseconds as needed. Thanks to Brendan and Alexei for finding this quickly after the v4.8 release. Unfortunately the problematic commit has landed in some -stable trees so they'll need this fix as well. Many apologies for this mistake. I'll be looking to add a perf-clock sanity test to the kselftest timers tests soon. Fixes: 27727df240c7 "timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING" Reported-by: Brendan Gregg <bgregg@xxxxxxxxxxx> Reported-by: Alexei Starovoitov <alexei.starovoitov@xxxxxxxxx> Tested-and-reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> Cc: Peter Zijlstra <peterz@xxxxxxxxxxxxx> Cc: stable <stable@xxxxxxxxxxxxxxx> Cc: Steven Rostedt <rostedt@xxxxxxxxxxx> Link: http://lkml.kernel.org/r/1475636148-26539-1-git-send-email-john.stultz@xxxxxxxxxx Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> commit 486eeb6d6755a573829e6c5438eb7aae18891bb1 Author: Christopher S. Hall <christopher.s.hall@xxxxxxxxx> Date: Mon Feb 22 03:15:19 2016 -0800 time: Add cycles to nanoseconds translation [ Upstream commit 6bd58f09e1d8cc6c50a824c00bf0d617919986a1 ] The timekeeping code does not currently provide a way to translate externally provided clocksource cycles to system time. The cycle count is always provided by the result clocksource read() method internal to the timekeeping code. The added function timekeeping_cycles_to_ns() calculated a nanosecond value from a cycle count that can be added to tk_read_base.base value yielding the current system time. This allows clocksource cycle values external to the timekeeping code to provide a cycle count that can be transformed to system time. Cc: Prarit Bhargava <prarit@xxxxxxxxxx> Cc: Richard Cochran <richardcochran@xxxxxxxxx> Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Cc: Ingo Molnar <mingo@xxxxxxxxxx> Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx> Cc: kevin.b.stanton@xxxxxxxxx Cc: kevin.j.clarke@xxxxxxxxx Cc: hpa@xxxxxxxxx Cc: jeffrey.t.kirsher@xxxxxxxxx Cc: netdev@xxxxxxxxxxxxxxx Reviewed-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Signed-off-by: Christopher S. Hall <christopher.s.hall@xxxxxxxxx> Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx> Signed-off-by: Sasha Levin <alexander.levin@xxxxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |