|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [libvirt test] 105188: regressions - FAIL
flight 105188 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/105188/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-libvirt-xsm 15 guest-start/debian.repeat fail REGR. vs. 104989 Regressions which are regarded as allowable (not blocking): test-armhf-armhf-libvirt-xsm 13 saverestore-support-check fail like 104989 test-armhf-armhf-libvirt 13 saverestore-support-check fail like 104989 test-armhf-armhf-libvirt-raw 12 saverestore-support-check fail like 104989 Tests which did not succeed, but are not blocking: test-arm64-arm64-libvirt-xsm 1 build-check(1) blocked n/a build-arm64-libvirt 1 build-check(1) blocked n/a test-arm64-arm64-libvirt-qcow2 1 build-check(1) blocked n/a test-arm64-arm64-libvirt 1 build-check(1) blocked n/a build-arm64-pvops 5 kernel-build fail never pass test-amd64-i386-libvirt 12 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 12 migrate-support-check fail never pass test-amd64-amd64-libvirt 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 12 migrate-support-check fail never pass build-arm64-xsm 5 xen-build fail never pass build-arm64 5 xen-build fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 10 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 11 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 12 migrate-support-check fail never pass test-armhf-armhf-libvirt 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 11 migrate-support-check fail never pass version targeted for testing: libvirt bb5d6379a009b2806936f341523f80c9fabbcd4c baseline version: libvirt b42524552036cadb99d32c5dd0d6d598721518ff Last test of basis 104989 2017-01-30 04:20:29 Z 2 days Failing since 105075 2017-01-31 04:22:06 Z 1 days 2 attempts Testing same since 105188 2017-02-01 04:20:10 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Daniel P. Berrange <berrange@xxxxxxxxxx> Fabian Freyer <fabian.freyer@xxxxxxxxxxxxxxxxxxx> Jiri Denemark <jdenemar@xxxxxxxxxx> Ján Tomko <jtomko@xxxxxxxxxx> Martin Kletzander <mkletzan@xxxxxxxxxx> Maxim Nestratov <mnestratov@xxxxxxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Roman Bogorodskiy <bogorodskiy@xxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm fail build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-arm64 fail build-armhf pass build-i386 pass build-amd64-libvirt pass build-arm64-libvirt blocked build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-arm64-pvops fail build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm blocked test-armhf-armhf-libvirt-xsm fail test-amd64-i386-libvirt-xsm pass test-amd64-amd64-libvirt pass test-arm64-arm64-libvirt blocked test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-arm64-arm64-libvirt-qcow2 blocked test-armhf-armhf-libvirt-raw pass test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit bb5d6379a009b2806936f341523f80c9fabbcd4c Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Tue Jan 24 15:50:17 2017 +0100 qemu: Don't lose group_name Now that we have a function for properly assigning the blockdeviotune info, let's use it instead of dropping the group name on every assignment. Otherwise it will not work with both --live and --config options. Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit eae7cfd42d442ccb1b4d086a1ed792c27e4cdc54 Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Mon Jan 30 20:37:48 2017 +0100 conf: Add virDomainDiskSetBlockIOTune That function sets disk->blkdeviotune sensibly. Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit 8336cbca21185c085f2183547cf55f59fe43bd38 Author: Martin Kletzander <mkletzan@xxxxxxxxxx> Date: Mon Jan 30 20:38:03 2017 +0100 qemu: Fix indentation in qemu_domain.h for RNG Namespaces Signed-off-by: Martin Kletzander <mkletzan@xxxxxxxxxx> commit 99fb668ede605ea9c9c940d6d8f6324b11327416 Author: Maxim Nestratov <mnestratov@xxxxxxxxxxxxx> Date: Tue Nov 29 21:07:38 2016 +0300 vz: change printing format specifier for network statistics This is necessary to be able to get statistics for venet0 or "host-routed" adapter, which has -1 index and thus, its statistics is shown as "net.nic4294967295". Signed-off-by: Maxim Nestratov <mnestratov@xxxxxxxxxxxxx> commit 4ebb75c3649e257c8abbe296d911f43e471b49c7 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Tue Jan 31 10:44:13 2017 +0300 vz: support virDomainReset commit 48317abbf7c2cdf92cfe9a8c5e7594af0b5778f8 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Tue Jan 31 10:44:12 2017 +0300 vz: support virDomainAbortJob commit 3ac97c2dedd2a4715d06cf506be3727df32e79eb Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Fri Jan 27 14:06:29 2017 +0100 qemu: Add enough USB hubs to accomodate all devices Commit 815d98a started auto-adding one hub if there are more USB devices than available USB ports. This was a strange choice, since there might be even more devices. Before USB address allocation was implemented in libvirt, QEMU automatically added a new USB hub if the old one was full. Adjust the logic to try adding as many hubs as will be needed to plug in all the specified devices. https://bugzilla.redhat.com/show_bug.cgi?id=1410188 commit 077c6d450fb1fae324d88412f37268458b2f924a Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Fri Jan 27 13:58:15 2017 +0100 conf: move VIR_DOMAIN_USB_HUB_PORTS to the header file For reusing in qemu_domain_address.c. commit ae01530cb431a4a4915524f323c9c000ea591d8e Author: Roman Bogorodskiy <bogorodskiy@xxxxxxxxx> Date: Thu Jan 5 18:38:20 2017 +0400 bhyve: add tests for SATA address allocation commit 803966c76da17d79c26114f22b057091f055a867 Author: Roman Bogorodskiy <bogorodskiy@xxxxxxxxx> Date: Thu Jan 5 16:51:25 2017 +0400 bhyve: fix SATA address allocation As bhyve for a long time didn't have a notion of the explicit SATA controller and created a controller for each drive, the bhyve driver in libvirt acted in a similar way and didn't care about the SATA controllers and assigned PCI addresses to drives directly, as the generated command will look like this anyway: 2:0,ahci-hd,somedisk.img This no longer makes sense because: 1. After commit c07d1c1c4f it's not possible to assign PCI addresses to disks 2. Bhyve now supports multiple disk drives for a controller, so it's going away from 1:1 controller:disk mapping, so the controller object starts to make more sense now So, this patch does the following: - Assign PCI address to SATA controllers (previously we didn't do this) - Assign disk addresses instead of PCI addresses for disks. Now, when building a bhyve command, we take PCI address not from the disk itself but from its controller - Assign addresses at XML parsing time using the assignAddressesCallback. This is done mainly for being able to verify address allocation via xml2xml tests - Adjust existing bhyvexml2{xml,argv} tests to chase the new address allocation This patch is largely based on work of Fabian Freyer. commit 13a050b2c3abddaf15e446c6b6bfd0c50d2c7261 Author: Roman Bogorodskiy <bogorodskiy@xxxxxxxxx> Date: Thu Jan 5 16:31:35 2017 +0400 bhyve: add virBhyveDriverCreateXMLConf Add virBhyveDriverCreateXMLConf, a simple wrapper around virDomainXMLOptionNew that makes it easier to pass bhyveConnPtr as a private data for parser. It will be used later for device address allocation at parsing time. Update consumers to use it instead of direct calls to virDomainXMLOptionNew. As we now have proper callbacks connected for the tests, update test files accordingly to include the automatically generated PCI root controller. commit 20a7737d35a2baebeb859107f8bdc32eda4c92bb Author: Fabian Freyer <fabian.freyer@xxxxxxxxxxxxxxxxxxx> Date: Thu Jan 5 16:21:52 2017 +0400 bhyve: detect 32 SATA devices per controller support Introduce a BHYVE_CAP_AHCI32SLOT capability that shows if 32 devices per SATA controller are supported, and a bhyveProbeCapsAHCI32Slot function that probes it. commit b66bf0730a328620ccb08d5a94612abcf50b5c65 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Mon Dec 12 10:56:38 2016 +0300 vz: add state group to all domain stats commit 2a41a2301b959abb3928a226286e25e86966926a Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Mon Dec 12 10:56:37 2016 +0300 vz: add balloon group to all domain stats commit e15e94c2dd5e49f64cc0ae1d4dcd72e4fd06b433 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Mon Dec 12 10:56:36 2016 +0300 vz: add vcpu group to all domain stats commit 87f41f38e3ed3cd049f1589d4c9c5a466bd73f25 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Mon Dec 12 10:56:35 2016 +0300 vz: add net group to all domain stats commit 0d5ca32e381615d085c82682c2656e4a12dd0fc8 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Mon Dec 12 10:56:34 2016 +0300 vz: provide block stats for all domain stats commit 9c10c03093e9b0fb4978d69a19237b1730f7add8 Author: Nikolay Shirokovskiy <nshirokovskiy@xxxxxxxxxxxxx> Date: Thu Dec 29 12:58:34 2016 +0300 vz: don't show bootorder for containers Because this is invalid xml for containers. This patch almost reverts 7eda8369, but still skips converting vz sdk bootorder for containers to libvirt bootorder because we use boot order in containers for quite different purpurse. commit de325472cc27f57c56d0a4049fc3c58f59e8c8b4 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Fri Jan 27 15:26:13 2017 +0100 qemu: assign USB addresses on redirdev hotplug too https://bugzilla.redhat.com/show_bug.cgi?id=1375410 commit 6a586ee2d9403b5a7ba6da07c9c17c72ab0bff4c Author: Daniel P. Berrange <berrange@xxxxxxxxxx> Date: Thu Jan 26 15:43:39 2017 +0000 Add libvirt-go-xml and libvirt-console-proxy to downloads Add recently created modules to the download page list. Signed-off-by: Daniel P. Berrange <berrange@xxxxxxxxxx> commit a5cae75a3e2f1b3b0bac082d96554d296dcf6f04 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Sun Jan 29 12:15:28 2017 +0100 qemuBuildChrChardevStr: Don't leak @charAlias ==12618== 110 bytes in 10 blocks are definitely lost in loss record 269 of 295 ==12618== at 0x4C2AE5F: malloc (vg_replace_malloc.c:297) ==12618== by 0x1CFC6DD7: vasprintf (vasprintf.c:73) ==12618== by 0x1912B2FC: virVasprintfInternal (virstring.c:551) ==12618== by 0x1912B411: virAsprintfInternal (virstring.c:572) ==12618== by 0x50B1FF: qemuAliasChardevFromDevAlias (qemu_alias.c:638) ==12618== by 0x518CCE: qemuBuildChrChardevStr (qemu_command.c:4973) ==12618== by 0x522DA0: qemuBuildShmemBackendChrStr (qemu_command.c:8674) ==12618== by 0x523209: qemuBuildShmemCommandLine (qemu_command.c:8789) ==12618== by 0x526135: qemuBuildCommandLine (qemu_command.c:9843) ==12618== by 0x48B4BA: qemuProcessCreatePretendCmd (qemu_process.c:5897) ==12618== by 0x4378C9: testCompareXMLToArgv (qemuxml2argvtest.c:498) ==12618== by 0x44D5A6: virTestRun (testutils.c:180) Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit cff9de3eb407717498c5ab09ddaa5d671c6597b3 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Fri Jan 27 18:47:26 2017 +0100 spec: Enable qemu driver for RHEL-7 on aarch64 Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |