|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [ovmf baseline-only test] 71343: tolerable FAIL
This run is configured for baseline tests only. flight 71343 ovmf real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/71343/ Failures :-/ but no regressions. Regressions which are regarded as allowable (not blocking): build-amd64-libvirt 5 libvirt-build fail like 71342 build-i386-libvirt 5 libvirt-build fail like 71342 version targeted for testing: ovmf 7a85e8474127ae6df47337a04797b2b443b57682 baseline version: ovmf 11a6cc5bda811513d2fbe47d8cb1a70b48077800 Last test of basis 71342 2017-05-18 06:51:54 Z 0 days Testing same since 71343 2017-05-18 13:19:36 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Dandan Bi <dandan.bi@xxxxxxxxx> Laszlo Ersek <lersek@xxxxxxxxxx> jobs: build-amd64-xsm pass build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt fail build-i386-libvirt fail build-amd64-pvops pass build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary Push not applicable. ------------------------------------------------------------ commit 7a85e8474127ae6df47337a04797b2b443b57682 Author: Dandan Bi <dandan.bi@xxxxxxxxx> Date: Thu May 18 09:51:42 2017 +0800 MdeModulePkg/PciHostBridgeDxe: Fix EBC build failure Cc: Jiewen Yao <jiewen.yao@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Dandan Bi <dandan.bi@xxxxxxxxx> Reviewed-by: Jiewen Yao <jiewen.yao@xxxxxxxxx> commit 639c7dd86d1d63a6c4ac5f19f8a97986aa1f363b Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 23:59:04 2017 +0100 OvmfPkg: resolve PcdLib for PEIMs to PeiPcdLib by default In the previous patch we had to add two explicit Null resolutions, but here we can remove five PeiPcdLib ones, after setting the default to it. Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit fbce1fe983f6d0cc10607c533d1bd09c4bceba0a Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 23:52:28 2017 +0100 OvmfPkg: resolve PcdLib for all PEIMs individually Currently the default (module type independent) PcdLib resolution is to BasePcdLibNull.inf, which is inherited by all PEIMs. In the next patch, we'll flip the PEIM default resolution to PeiPcdLib.inf, but in order to keep that patch both correct and simple to review, we should spell out the Null resolution for those two PEIMs (ReportStatusCodeRouterPei and StatusCodeHandlerPei) that are now the only ones that don't specify an explicit resolution. Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit 5e167d7e784c92591921c29b61f0f7a000d9c7ce Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 22:01:40 2017 +0100 OvmfPkg/PlatformPei: don't allocate reserved mem varstore if SMM_REQUIRE For the emulated variable store, PlatformPei allocates reserved memory (as early as possible, so that the address remains the same during reboot), and PcdEmuVariableNvStoreReserved carries the address to EmuVariableFvbRuntimeDxe. However, EmuVariableFvbRuntimeDxe is excluded from the SMM_REQUIRE build, and then noone consumes PcdEmuVariableNvStoreReserved. Don't waste reserved memory whenever that's the case. (Even a dynamic default for PcdEmuVariableNvStoreReserved would be unnecessary; but that way the PcdSet64S() call in the ReserveEmuVariableNvStore() function doesn't compile.) Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit 62f43f7c1947c799dd69fb4b2d94376b8e689b51 Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Fri May 5 03:31:32 2017 +0200 OvmfPkg: sync PcdVariableStoreSize with PcdFlashNvStorageVariableSize "MdeModulePkg/MdeModulePkg.dec" declares PcdVariableStoreSize like this: > The size of volatile buffer. This buffer is used to store VOLATILE > attribute variables. There is no inherent reason why the size of the volatile variable store should match the same of the non-volatile variable store. Indeed flash variables in the 4MB build work fine without this equality. However, OvmfPkg/EmuVariableFvbRuntimeDxe uses PcdVariableStoreSize to initialize the non-volatile VARIABLE_STORE_HEADER too. (Presumably based on the fact that ultimately that storage will not be permanent.) When using EmuVariableFvbRuntimeDxe in the 4MB build, the mismatch between the two mentioned PCDs (which is apparent through EmuVariableFvbRuntimeDxe's VARIABLE_STORE_HEADER) triggers an assertion in the variable driver: > ASSERT MdeModulePkg/Universal/Variable/RuntimeDxe/Variable.c(3772): > mNvVariableCache->Size == VariableStoreLength Bringing PcdVariableStoreSize in sync with PcdFlashNvStorageVariableSize fixes this. It also happens to ensure a volatile store size in the 4MB build that equals the non-volatile store size, which likely doesn't hurt for symmetry. Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Fixes: b24fca05751f8222acf264853709012e0ab7bf49 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit c15c1c086325efd9b50ca754e44a52501d5fc5ca Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 21:01:25 2017 +0100 OvmfPkg/PlatformPei: remove unused PcdVariableStoreSize dependency Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit 5c27723204a89b65c175b6f4f641dc6437b45f99 Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 20:54:16 2017 +0100 OvmfPkg: remove gUefiOvmfPkgTokenSpaceGuid.PcdSecureBootEnable This PCD is no longer used. Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> commit 6d7af0c9bc5e0d98092da9b6593b31abbc69dc76 Author: Laszlo Ersek <lersek@xxxxxxxxxx> Date: Sun Mar 12 20:51:08 2017 +0100 OvmfPkg/EmuVariableFvbRuntimeDxe: always format an auth varstore header In this patch, we extend commit d92eaabefbe0 ("OvmfPkg: simplify VARIABLE_STORE_HEADER generation", 2016-02-05) to EmuVariableFvbRuntimeDxe. This is the difference between FvAndVarTemplate and FvAndAuthenticatedVarTemplate: > --- non-auth 2017-05-05 22:32:06.001512283 +0200 > +++ auth 2017-05-05 22:32:18.841364882 +0200 > @@ -1,7 +1,7 @@ > // > - // Templates for standard (non-authenticated) variable FV header > + // Templates for authenticated variable FV header > // > - STATIC FVB_FV_HDR_AND_VARS_TEMPLATE FvAndVarTemplate = { > + STATIC FVB_FV_HDR_AND_VARS_TEMPLATE FvAndAuthenticatedVarTemplate = { > { // EFI_FIRMWARE_VOLUME_HEADER FvHdr; > // UINT8 ZeroVector[16]; > { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, > @@ -34,7 +34,7 @@ > EFI_FVH_REVISION, > > // EFI_FV_BLOCK_MAP_ENTRY BlockMap[1]; > - { > + { > { > 2, // UINT32 NumBlocks; > EMU_FVB_BLOCK_SIZE // UINT32 Length; > @@ -44,8 +44,8 @@ > // EFI_FV_BLOCK_MAP_ENTRY EndBlockMap; > { 0, 0 }, // End of block map > { // VARIABLE_STORE_HEADER VarHdr; > - // EFI_GUID Signature; > - EFI_VARIABLE_GUID, > + // EFI_GUID Signature; // need authenticated variables for secure boot > + EFI_AUTHENTICATED_VARIABLE_GUID, > > // UINT32 Size; > ( After this change, using "-bios", the variable driver logs: - with the SB feature enabled: > Variable driver will work with auth variable format! > Variable driver will work with auth variable support! - with the SB feature disabled: > Variable driver will work with auth variable format! > Variable driver will continue to work without auth variable support! Cc: Jordan Justen <jordan.l.justen@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Laszlo Ersek <lersek@xxxxxxxxxx> Reviewed-by: Jordan Justen <jordan.l.justen@xxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |