|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [libvirt test] 113873: regressions - FAIL
flight 113873 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/113873/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-libvirt 7 xen-boot fail REGR. vs. 113851 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt-xsm 14 saverestore-support-check fail like 113851 test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail like 113851 test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-i386-libvirt-qcow2 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 13 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass version targeted for testing: libvirt 5c52aed174b386f897fce870b2453e6cee5ebbc3 baseline version: libvirt 01f86fb301a55c15c33dd02e6a7e2aac5ecad93d Last test of basis 113851 2017-09-27 04:20:16 Z 1 days Testing same since 113873 2017-09-28 04:28:32 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Erik Skultety <eskultet@xxxxxxxxxx> John Ferlan <jferlan@xxxxxxxxxx> Ján Tomko <jtomko@xxxxxxxxxx> Pavel Hrdina <phrdina@xxxxxxxxxx> Peter Krempa <pkrempa@xxxxxxxxxx> ZhiPeng Lu <lu.zhipeng@xxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt fail test-amd64-i386-libvirt pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-i386-libvirt-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 5c52aed174b386f897fce870b2453e6cee5ebbc3 Author: Pavel Hrdina <phrdina@xxxxxxxxxx> Date: Tue Sep 26 16:47:20 2017 +0200 rpc: for messages with FDs always decode count of FDs from the message The packet with passed FD has the following format: -------------------------- | len | header | payload | -------------------------- where "payload" has an additional count of FDs before the actual data: ------------------ | nfds | payload | ------------------ When the packet is received we parse the "header", which as a side effect updates msg->bufferOffset to point to the beginning of "payload". If the message call contains FDs, we need to also parse the count of FDs, which also updates the msg->bufferOffset. The issue here is that when we attempt to read the FDs data from the socket and we receive EAGAIN we finish the reading and call poll() to wait for the data the we need. When the data arrives we already have the packet in our buffer so we read the "header" again but this time we don't read the count of FDs because we already have it stored. That means that the msg->bufferOffset is not updated to point to the actual beginning of the payload data, but it points to the count of FDs. After all FDs are processed we dispatch the message to process it and decode the payload. Since the msg->bufferOffset points to wrong data, we decode the wrong payload and the API call fails with error messages: Domain not found: no domain with matching uuid '67656e65-7269-6300-0c87-5003ca6941f2' () Broken by commit 133c511b527 which fixed a FD and memory leak. Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx> commit 3685e2dd64f8565d739953bde871860f343436e4 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Wed Aug 23 14:19:36 2017 +0200 qemu: domain: Extract common clearing of VM private data VM private data is cleared when the VM is turned off and also when the VM object is being freed. Some of the clearing code was duplicated. Extract it to a separate function. This also removes the now unnecessary function qemuDomainClearPrivatePaths. commit f54f32740fd3c7d1fbb9742a13b83694738cecc2 Author: Erik Skultety <eskultet@xxxxxxxxxx> Date: Wed Sep 27 15:08:53 2017 +0200 docs: Add the closing </address> tag for mdev example Signed-off-by: Erik Skultety <eskultet@xxxxxxxxxx> commit 959fe7de1f0f6fadb86e853edead6d32c3cb3559 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Tue Aug 16 12:29:05 2016 +0200 Shrink volume even with ALLOCATE flag Calling fallocate on the new (smaller) capacity ensures that the whole file is allocated, but it does not reduce the file size. Also call ftruncate after fallocate. https://bugzilla.redhat.com/show_bug.cgi?id=1366446 commit 3f702f5ab1d8cfcfa41a49aa7f6e3881242d5f0f Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Mon Sep 25 16:35:42 2017 +0200 virStorageFileResize: fallocate the whole capacity We have been trying to implement the ALLOCATE flag to mean "the volume should be fully allocated after the resize". Since commit b0579ed9 we do not allocate from the existing capacity, but from the existing allocation value. However this value is a total of all the allocated bytes, not an offset. For a sparsely allocated file: $ perl -e 'print "x"x8192;' > vol1 $ fallocate -p -o 0 -l 4096 vol1 $ virsh vol-info vol1 default Capacity: 8.00 KiB Allocation: 4.00 KiB Treating allocation as an offset would result in an incompletely allocated file: $ virsh vol-resize vol1 --pool default 16384 --allocate Capacity: 16.00 KiB Allocation: 12.00 KiB Call fallocate from zero on the whole requested capacity to fully allocate the file. After that, the volume is fully allocated after the resize: $ virsh vol-resize vol1 --pool default 16384 --allocate $ virsh vol-info vol1 default Capacity: 16.00 KiB Allocation: 16.00 KiB commit 5463d9596903b370e7d078eeacb0e3f3c71c526f Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Mon Sep 25 16:29:34 2017 +0200 use virFileAllocate in virStorageFileResize Introduce a new function virFileAllocate that will call the non-destructive variants of safezero, essentially reverting my commit 1390c268 safezero: fall back to writing zeroes even when resizing back to the state as of commit 18f0316 virstoragefile: Have virStorageFileResize use safezero This means that _ALLOCATE flag will no longer work on platforms without the allocate syscalls, but it will not overwrite data either. commit 63d3d895a2c00a849440706b3daa7199296b4b33 Author: John Ferlan <jferlan@xxxxxxxxxx> Date: Tue Sep 5 13:44:15 2017 -0400 virsh: Add/allow secret-uuid for pool-{define|create}-as https://bugzilla.redhat.com/show_bug.cgi?id=1476775 For the virsh pool-{define|create}-as command, let's allow using --secret-uuid on the command line as an alternative to --secret-usage (added for commit id '8932580'), but ensure that they are mutually exclusive. commit d957e2366334c467fa8adf2f11738a2032b2c06e Author: ZhiPeng Lu <lu.zhipeng@xxxxxxxxxx> Date: Wed Sep 27 09:01:39 2017 +0800 nwfilter: Fix memory leak in learnIPAddressThread Don't leak @inetaddr within the done: processing when attempting to instantiate the filter. Signed-off-by: ZhiPeng Lu <lu.zhipeng@xxxxxxxxxx> commit 7e2086257602a4726e7affd2806f4f984ea6287d Author: ZhiPeng Lu <lu.zhipeng@xxxxxxxxxx> Date: Wed Sep 27 16:53:50 2017 +0800 nwfilter: Fix memory leak in virNWFilterIPAddrMapAddIPAddr If virNWFilterHashTablePut fails, then the @val was leaked. Signed-off-by: ZhiPeng Lu <lu.zhipeng@xxxxxxxxxx> commit 955caf171c0370cf4a32eec9a18aca2b653e6b82 Author: Ján Tomko <jtomko@xxxxxxxxxx> Date: Tue Sep 26 13:56:36 2017 +0200 qemu: fix hotplug of udp device with no connect host Use an empty string to let qemu fill out the default. This matches what's done in qemuBuildChrChardevStr. https://bugzilla.redhat.com/show_bug.cgi?id=1454671 Signed-off-by: Ján Tomko <jtomko@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 80740d9c66e377903adb553094f76944b4bd0dfd Author: Pavel Hrdina <phrdina@xxxxxxxxxx> Date: Wed Sep 20 15:59:18 2017 +0200 Revert "vhost-user: add support reconnect for vhost-user ports" This reverts commit edaf4ebe95a5995585c8ab7bc5b92887286d4431. This uses "reconnect" as attribute for <source> element, but we already have a <reconnect> element for <source> element for chardev devices. Since this is the same feature for different device it should be presented in XML the same way. Signed-off-by: Pavel Hrdina <phrdina@xxxxxxxxxx> commit 4b480d10768c7a288c10e2e39f6a2bf275a0eb69 Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Sep 25 16:16:08 2017 +0200 qemu: process: Refresh data from qemu monitor after migration Some values we read from the qemu monitor may be changed with the actual state by the incoming migration. This means that we should refresh certain things only after the migration has finished. This is mostly visible in the cdrom tray state, which is by default closed but may be opened by the guest OS. This would be refreshed before qemu transferred the actual state and thus libvirt would think that the tray is closed. Note that this patch moves only a few obvious query commands. Others may be moved later after individual assessment. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1463168 commit cf30a8cabd5943992e30c45efdd5fd7b82dd53cc Author: Peter Krempa <pkrempa@xxxxxxxxxx> Date: Mon Sep 25 22:34:44 2017 +0200 qemu: hotplug: Ignore cgroup errors when hot-unplugging vcpus When the vcpu is successfully removed libvirt would remove the cgroup. In cases when removal of the cgroup fails libvirt would report an error. This does not make much sense, since the vcpu was removed and we can't really do anything with the cgroup. This patch silences the errors from cgroup removal. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1462092 _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |