[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ovmf baseline-only test] 72208: all pass



This run is configured for baseline tests only.

flight 72208 ovmf real [real]
http://osstest.xs.citrite.net/~osstest/testlogs/logs/72208/

Perfect :-)
All tests in this flight passed as required
version targeted for testing:
 ovmf                 baee8efb361496b4be300b467340b2593ca30c9c
baseline version:
 ovmf                 fe4049471bdf066c3c07dfa76752149743afa16f

Last test of basis    72194  2017-10-03 19:22:52 Z    2 days
Testing same since    72208  2017-10-06 08:52:33 Z    0 days    1 attempts

------------------------------------------------------------
People who touched revisions under test:
  Alexei Fedorov <alexei.fedorov@xxxxxxx>
  Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
  Evan Lloyd <evan.lloyd@xxxxxxx>
  Girish Pathak <girish.pathak@xxxxxxx>

jobs:
 build-amd64-xsm                                              pass    
 build-i386-xsm                                               pass    
 build-amd64                                                  pass    
 build-i386                                                   pass    
 build-amd64-libvirt                                          pass    
 build-i386-libvirt                                           pass    
 build-amd64-pvops                                            pass    
 build-i386-pvops                                             pass    
 test-amd64-amd64-xl-qemuu-ovmf-amd64                         pass    
 test-amd64-i386-xl-qemuu-ovmf-amd64                          pass    


------------------------------------------------------------
sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images

Logs, config files, etc. are available at
    http://osstest.xs.citrite.net/~osstest/testlogs/logs

Test harness code can be found at
    http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary


Push not applicable.

------------------------------------------------------------
commit baee8efb361496b4be300b467340b2593ca30c9c
Author: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Date:   Thu Sep 1 17:21:57 2016 +0100

    ArmPkg/GenericWatchdogDxe: Set Watchdog interrupt type
    
    Utilise the new HardwareInterrupt2 protocol to adjust the
    Edge/Level characteristics of the Watchdog interrupt.
    
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
    Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx>
    Signed-off-by: Evan Lloyd <evan.lloyd@xxxxxxx>
    Tested-by: Girish Pathak <girish.pathak@xxxxxxx>
    Reviewed-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>

commit 8659306a2e8f7dfceebce2be358b564f7aff6cbb
Author: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Date:   Thu Sep 1 17:21:56 2016 +0100

    ArmPkg/ArmGicDxe: Expose HardwareInterrupt2 protocol
    
    The existing HardwareInterrupt protocol lacked a means to configure the
    level/edge properties of an interrupt.  The new HardwareInterrupt2
    protocol introduced this capability.
    This patch updates the GIC drivers to provide the new interfaces.
    The changes comprise:
      Update to use HardwareInterrupt2 protocol
      Additions to register info in ArmGicLib.h
      Added new functionality (GetTriggerType and SetTriggerType)
    
    The requirement for this change derives from a problem detected on ARM
    Juno boards, but the change is of generic (ARM) relevance.
    
    This commit is in response to review on the mailing list and, as
    suggested there, rolls Girish's updates onto Ard's original example.
    
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
    Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx>
    Signed-off-by: Evan Lloyd <evan.lloyd@xxxxxxx>
    Tested-by: Girish Pathak <girish.pathak@xxxxxxx>
    Reviewed-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>

commit e40c72893669dd5246d53288d13301192e23c670
Author: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Date:   Thu Sep 1 17:21:55 2016 +0100

    EmbeddedPkg: Introduce HardwareInterrupt2 protocol
    
    The existing HardwareInterrupt protocol lacks the means to configure
    the level/edge and polarity properties of an interrupt. So introduce a
    new protocol HardwareInterrupt2, and add some new members that allow
    manipulation of those properties.
    
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
    Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx>
    Signed-off-by: Evan Lloyd <evan.lloyd@xxxxxxx>
    Tested-by: Girish Pathak <girish.pathak@xxxxxxx>
    Reviewed-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>

commit b0393756d65443b430d2816eda9008fa8d599c7f
Author: Evan Lloyd <evan.lloyd@xxxxxxx>
Date:   Wed Feb 15 16:54:29 2017 +0000

    ArmPkg: Tidy GIC code before changes.
    
    This change is purely cosmetic, to tidy some code before change.
    Mods involve:
        Re-order #includes
        Reformat comments.
        Use ns consistently (always "100ns" not sometimes "100 nS")
        Split overlength code lines.
        Make protocol functions STATIC.
        Remove "Horor vacui" comments.
        Rationalize GIC register address calculations
        Replace explicit test and assert with ASSERT_EFI_ERROR.
    
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx>
    Signed-off-by: Alexei Fedorov <alexei.fedorov@xxxxxxx>
    Signed-off-by: Evan Lloyd <evan.lloyd@xxxxxxx>
    Reviewed-by: Leif Lindholm <leif.lindholm@xxxxxxxxxx>

_______________________________________________
osstest-output mailing list
osstest-output@xxxxxxxxxxxxxxxxxxxx
https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.