|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable-smoke test] 114346: regressions - FAIL
flight 114346 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/114346/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-xl 7 xen-boot fail REGR. vs. 114299 Tests which did not succeed, but are not blocking: test-amd64-amd64-libvirt 13 migrate-support-check fail never pass version targeted for testing: xen f17d2cd2ffeda70aba8788910e9d088415562c8b baseline version: xen 3b40cfcd1a1912c2e4c4eb353dc77cbf35c63c3a Last test of basis 114299 2017-10-10 21:02:54 Z 0 days Failing since 114308 2017-10-10 23:01:10 Z 0 days 5 attempts Testing same since 114318 2017-10-11 02:19:34 Z 0 days 4 attempts ------------------------------------------------------------ People who touched revisions under test: Andre Przywara <andre.przywara@xxxxxxx> Julien Grall <julien.grall@xxxxxxx> Stefano Stabellini <sstabellini@xxxxxxxxxx> jobs: build-amd64 pass build-armhf pass build-amd64-libvirt pass test-armhf-armhf-xl fail test-amd64-amd64-xl-qemuu-debianhvm-i386 pass test-amd64-amd64-libvirt pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit f17d2cd2ffeda70aba8788910e9d088415562c8b Author: Andre Przywara <andre.przywara@xxxxxxx> Date: Sat Oct 7 01:06:40 2017 +0100 ARM: sunxi: support more Allwinner SoCs So far we only supported the Allwinner A20 SoC. Add support for most of the other virtualization capable Allwinner SoCs by: - supporting the watchdog in newer (sun8i) SoCs - getting the watchdog address from DT - adding compatible strings for other 32-bit SoCs - adding compatible strings for 64-bit SoCs As all 64-bit SoCs support system reset via PSCI, we don't use the platform specific reset routine there. Should the 32-bit SoCs start to properly support the PSCI 0.2 SYSTEM_RESET call, we will use it for them automatically, as we try PSCI first, then fall back to platform reset. Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Signed-off-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit e2dfe4a037b0c6ccfd2375e4b60668109a0118e5 Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:41 2017 +0100 xen/arm: mm: Use memory flags for modify_xen_mappings rather than custom one This will help to consolidate the page-table code and avoid different path depending on the action to perform. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> commit 6b88beed40c756aaff018d286f4de31351240a93 Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:40 2017 +0100 xen/arm: mm: Handle permission flags when adding a new mapping Currently, all the new mappings will be read-write non-executable. Allow the caller to use other permissions. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 28f2ad440a08908010abec43b7ccc3283051e943 Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:39 2017 +0100 xen/arm: mm: Embed permission in the flags Currently, it is not possible to specify the permission of a new mapping. It would be necessary to use the function modify_xen_mappings with a different set of flags. Introduce a couple of new flags for the permissions (Non-eXecutable, Read-Only) and also provides definition that combine the memory attribute and permission for common combinations. PAGE_HYPERVISOR is now an alias to PAGE_HYPERVISOR_RW (read-write, non-executable mappings). This does not affect the current mapping using PAGE_HYPERVISOR because Xen is currently forcing all the mapping to be non-executable by default (see mfn_to_xen_entry). A follow-up patch will change modify_xen_mappings to use the new flags. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> Signed-off-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 5f3edb5f32e511b915d173403d0b7b5ea38e00ad Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:38 2017 +0100 xen/arm: page: Describe the layout of flags used to update page tables Currently, the flags used to update page tables (i.e PAGE_HYPERVISOR_*) only contains the memory attribute index. Follow-up patches will add more information in it. So document the current layout. At the same time introduce PAGE_AI_MASK to get the memory attribute index easily. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 7d68c8db25f0ffc7f39af2fc929f1c77c1affa01 Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:37 2017 +0100 xen/arm: mm: Use PAGE_HYPERVISOR_* instead of MT_* when calling set_fixmap At the moment, PAGE_HYPERVISOR_* and MT_* have exactly the same value. In a follow-up patch the former will be extended to carry more information. It looks like the caller of set_fixmap are mixing the both. Stay consistent and only use PAGE_HYPERVISOR_*. This is also match the behavior of create_xen_entries and would potentially allow to share some part in the future. Also rename the parameter 'attributes' to 'flags' so it is clearer what is the interface. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit b797f4d03bed21ff643a93909abdd58107b6c8cf Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:36 2017 +0100 xen/arm: mm: Rename 'ai' into 'flags' in create_xen_entries The parameter 'ai' is used either for attribute index or for permissions. Follow-up patch will rework that parameters to carry more information. So rename the parameter to 'flags'. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit fc24d616beda7b0d9a96c588b06862f46b189181 Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:35 2017 +0100 xen/arm: Switch to SYS_STATE_boot just after end_boot_allocator() We should consider the early boot period to end when we stop using the boot allocator. This is inline with x86 and will be helpful to know whether we should allocate memory from the boot allocator or xenheap. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 9a7f6dd6d2244993968569deb9963934add0a50d Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:34 2017 +0100 xen/arm: mm: Rename and clarify AP[1] in the stage-1 page table The description of AP[1] in Xen is based on testing rather than the ARM ARM. Per the ARM ARM, on EL2 stage-1 page table, AP[1] is RES1 as the translation regime applies to only one exception level (see D4.4.4 and G4.6.1 in ARM DDI 0487B.a). Update the comment and also rename the field to match the description in the ARM ARM. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Acked-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit a0543df403d457e139069d3356d42a89b25d11df Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:33 2017 +0100 xen/arm: page: Clean-up the definition of MAIRVAL Currently MAIRVAL is defined in term of MAIR0VAL and MAIR1VAL which are both hardcoded value. This makes quite difficult to understand the value written in both registers. Rework the definition by using value of each attribute shifted by their associated index. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 70a3bd02f963d60cab30a2d6e6589ac477132d7c Author: Julien Grall <julien.grall@xxxxxxx> Date: Mon Oct 9 14:23:32 2017 +0100 xen/arm: page: Use ARMv8 naming to improve readability This is based on the Linux ARMv8 naming scheme (see arch/arm64/mm/proc.S). Each type will contain "NORMAL" or "DEVICE" to make clear whether each attribute targets device or normal memory. Signed-off-by: Julien Grall <julien.grall@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |