|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [libvirt test] 115172: trouble: broken/pass
flight 115172 libvirt real [real] http://logs.test-lab.xenproject.org/osstest/logs/115172/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-libvirt <job status> broken test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm <job status> broken test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 4 host-install(4) broken REGR. vs. 114825 test-amd64-amd64-libvirt 4 host-install(4) broken REGR. vs. 114825 Tests which did not succeed, but are not blocking: test-armhf-armhf-libvirt-xsm 14 saverestore-support-check fail like 114825 test-armhf-armhf-libvirt 14 saverestore-support-check fail like 114825 test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail like 114825 test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt-qcow2 12 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 13 migrate-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass version targeted for testing: libvirt 55ac6a5d44a2fbd7e93d995930d6071030c907ba baseline version: libvirt 08d4e16f88f9cb0e078b544f49a0647c8847fe95 Last test of basis 114825 2017-10-21 04:47:31 Z 3 days Testing same since 115172 2017-10-24 04:20:11 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Jiri Denemark <jdenemar@xxxxxxxxxx> Michal Privoznik <mprivozn@xxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm broken test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-libvirt broken test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-i386-libvirt-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-amd64-libvirt-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-job test-amd64-amd64-libvirt broken broken-job test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm broken broken-step test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm host-install(4) broken-step test-amd64-amd64-libvirt host-install(4) Not pushing. ------------------------------------------------------------ commit 55ac6a5d44a2fbd7e93d995930d6071030c907ba Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Oct 19 14:26:24 2017 +0200 qemu: Set correct job status when qemuMigrationRun fails Instead of enumerating all states which need to be turned into QEMU_DOMAIN_JOB_STATUS_FAILED (and failing to add all of them), it's better to mention just the one which needs to be left alone. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 73a352263c1745da8a71f1a636ff805ad3e1d249 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Oct 19 14:22:53 2017 +0200 qemu: Consistently use exit_monitor in qemuMigrationRun Almost every failure in qemuMigrationRun while we are talking to QEMU monitor results in a jump to exit_monitor label. The only exception is removed by this patch. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit af32e57f8e5800ceca46b775276f4a4877ecf89a Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Oct 19 14:21:00 2017 +0200 qemu: Don't misuse "ret" in qemuMigrationRun The "ret" variable is used for storing the return value of a function and should not be used as a temporary variable. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 7d2fbabcafaa357729a39331b015d759fc4213dd Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Oct 19 14:15:46 2017 +0200 qemu: Unite error handling in qemuMigrationRun Merge cancel and cancelPostCopy sections with the generic error section, where we can easily decide whether canceling the ongoing migration is required. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit c1a643b68f34040dee75959824759d527472e3c9 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Thu Oct 19 15:09:25 2017 +0200 qemu: Split cleanup and error code in qemuMigrationRun Let cleanup only do things common to both failure and success paths and move error handling code inside the new "error" section. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit f8ede9cc234e4d167eda7eccf68f9d02d3a65821 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Wed Oct 18 15:34:31 2017 +0200 qemu: Refactor qemuMigrationRun a bit Some code which was supposed to be executed only when migration succeeded was buried inside the cleanup code. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 960326237764f8970250a3608e7b2b880e030715 Author: Jiri Denemark <jdenemar@xxxxxxxxxx> Date: Tue Oct 17 21:27:55 2017 +0200 qemu: Use switch in qemuMigrationCompleted When adding a new job state it's useful to let the compiler complain about places where we need to think about what to do with the new state. Signed-off-by: Jiri Denemark <jdenemar@xxxxxxxxxx> Reviewed-by: John Ferlan <jferlan@xxxxxxxxxx> commit 8bf6426d6eaf6fc2b4593927d2279ec36f75e0d3 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Fri Oct 20 16:19:07 2017 +0200 news: Document user aliases Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 7e939394b23845a72ddee969a69b2d0b071a08bf Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Fri Oct 20 16:48:14 2017 +0200 tests: Test user set aliases for qemu Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit f3bc68e22177e745d470ccaaa23f776779b7e95e Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Thu Oct 19 08:39:40 2017 +0200 qemu: Parse alias from inactive XMLs https://bugzilla.redhat.com/show_bug.cgi?id=1434451 This way users can uniquely identify devices at define time. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 93bc2c21267963eaea0183092aa03f31a3f7c79a Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Wed Oct 18 13:48:46 2017 +0200 docs: Document user aliases Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 0429e52f19d77752658cbc4b745103188650b2ea Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Wed Oct 18 13:12:08 2017 +0200 conf: Format alias even for inactive XMLs We need to format alias even for inactive XMLs since that's the way how users are going to identify their devices. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 821b0b295d0dea21656a75bac34d4694ea28f4bd Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Tue Oct 17 13:13:08 2017 +0200 qemuhotplugtest: Load active XML The point of this test is to load live XML and test hotplug. But even though the XMLs we are parsing are live, the parsing is done with VIR_DOMAIN_DEF_PARSE_INACTIVE flag. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit a15c97f5e42324bb7be9c7afbac849b575a6926e Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Tue Oct 17 13:27:01 2017 +0200 qemuxml2argvdata: Drop device aliases The qemuxml2argvtest expects the domain XMLs to be inactive ones. Therefore we should pass inactive XMLs. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit 92f41b3297192c7e0e3ced63398e9c08f5f8cbd3 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Tue Oct 17 10:42:54 2017 +0200 qemuDomainABIStabilityCheck: Check for memory aliases too Since we will be allowing users to set device aliases and memory devices are fragile when it comes to aliases we have to make sure they won't change during migration. Other devices should be fine. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit e2797e3256cbfd43904a4edc3adc949b0bcdd342 Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Wed Oct 18 17:46:18 2017 +0200 conf: Validate user supplied aliases They have to be unique within the domain. As usual, backwards compatibility takes its price. In this particular situation we have a device that is represented twice in a domain and so is its alias. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit c14f1ed20647f2c6d0ae14bf8c50234217d2a57b Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Wed Oct 18 14:59:01 2017 +0200 conf: Parse user supplied aliases If driver that is calling the parse supports user supplied aliases, they can be parsed even for inactive XMLs. However, to avoid any clashes with aliases that libvirt generates, the user ones have to have "ua-" prefix. Note, that some drivers don't have notion of device aliases at all. Also, in order to support user supplied aliases some extra checks need to be done (e.g. during hotplug). Therefore we can't just enable this feature for all the drivers. Thus we need a flag that drivers set to tell parsing code that they can handle user supplied device aliases. Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> commit ad30f069d108c9e6f30c2aec227d609df3b4e9af Author: Michal Privoznik <mprivozn@xxxxxxxxxx> Date: Fri Oct 20 13:24:41 2017 +0200 qemu_alias: Be more tolerant if alias don't follow our format When assigning alias to a device we usually iterate over other devices of its kind trying to find next index. We do this by stripping down the prefix and then parsing number at the end, Usually, if the prefix doesn't match the one we are expecting, we just continue with next iteration. Except for couple of functions: qemuGetNextChrDevIndex(), qemuAssignDeviceRedirdevAlias() and qemuAssignDeviceShmemAlias(). Signed-off-by: Michal Privoznik <mprivozn@xxxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |