|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-4.9-testing test] 116220: regressions - FAIL
flight 116220 xen-4.9-testing real [real] http://logs.test-lab.xenproject.org/osstest/logs/116220/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm 10 debian-hvm-install fail REGR. vs. 115206 test-amd64-i386-xl-qemuu-win7-amd64 16 guest-localmigrate/x10 fail REGR. vs. 115206 Tests which did not succeed, but are not blocking: test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail like 115186 test-amd64-amd64-xl-qemuu-ws16-amd64 14 guest-localmigrate fail like 115206 test-amd64-amd64-xl-qemuu-win7-amd64 16 guest-localmigrate/x10 fail like 115206 test-armhf-armhf-xl-rtds 16 guest-start/debian.repeat fail like 115206 test-amd64-i386-xl-qemuu-ws16-amd64 17 guest-stop fail like 115206 test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail like 115206 test-amd64-i386-xl-qemut-ws16-amd64 16 guest-localmigrate/x10 fail like 115206 test-amd64-amd64-xl-rtds 10 debian-install fail like 115206 test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 13 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 14 saverestore-support-check fail never pass test-amd64-i386-libvirt-qcow2 12 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 13 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 14 saverestore-support-check fail never pass test-armhf-armhf-xl-credit2 13 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 14 saverestore-support-check fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 17 debian-hvm-install/l1/l2 fail never pass test-armhf-armhf-xl-rtds 13 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass test-armhf-armhf-libvirt 14 saverestore-support-check fail never pass test-armhf-armhf-xl-cubietruck 13 migrate-support-check fail never pass test-armhf-armhf-xl-cubietruck 14 saverestore-support-check fail never pass test-armhf-armhf-xl 13 migrate-support-check fail never pass test-armhf-armhf-xl 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt-xsm 13 migrate-support-check fail never pass test-armhf-armhf-libvirt-xsm 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 14 saverestore-support-check fail never pass test-armhf-armhf-xl-vhd 12 migrate-support-check fail never pass test-armhf-armhf-xl-vhd 13 saverestore-support-check fail never pass test-amd64-amd64-xl-qemut-win10-i386 10 windows-install fail never pass test-amd64-amd64-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-i386-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-i386-xl-qemut-win10-i386 10 windows-install fail never pass version targeted for testing: xen d6ce860bbdf9dbdc88e4f2692e16776a622b2949 baseline version: xen 61b6df9d821481ba4e26e5843aa9320345077319 Last test of basis 115206 2017-10-25 06:55:19 Z 22 days Testing same since 116220 2017-11-16 11:15:57 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> David Esler <drumandstrum@xxxxxxxxx> Eric Chanudet <chanudete@xxxxxxxxxxxx> George Dunlap <george.dunlap@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Min He <min.he@xxxxxxxxx> Yi Zhang <yi.z.zhang@xxxxxxxxx> Yu Zhang <yu.c.zhang@xxxxxxxxxxxxxxx> jobs: build-amd64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64-xtf pass build-amd64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-armhf-libvirt pass build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumprun pass build-i386-rumprun pass test-xtf-amd64-amd64-1 pass test-xtf-amd64-amd64-2 pass test-xtf-amd64-amd64-3 pass test-xtf-amd64-amd64-4 pass test-xtf-amd64-amd64-5 pass test-amd64-amd64-xl pass test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm fail test-amd64-amd64-libvirt-xsm pass test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm pass test-amd64-amd64-qemuu-nested-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 pass test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumprun-amd64 pass test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-qemut-ws16-amd64 pass test-amd64-i386-xl-qemut-ws16-amd64 fail test-amd64-amd64-xl-qemuu-ws16-amd64 fail test-amd64-i386-xl-qemuu-ws16-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-armhf-armhf-xl-credit2 pass test-armhf-armhf-xl-cubietruck pass test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumprun-i386 pass test-amd64-amd64-xl-qemut-win10-i386 fail test-amd64-i386-xl-qemut-win10-i386 fail test-amd64-amd64-xl-qemuu-win10-i386 fail test-amd64-i386-xl-qemuu-win10-i386 fail test-amd64-amd64-qemuu-nested-intel pass test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt pass test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-livepatch pass test-amd64-i386-livepatch pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair pass test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-pygrub pass test-amd64-i386-libvirt-qcow2 pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds fail test-armhf-armhf-xl-rtds fail test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit d6ce860bbdf9dbdc88e4f2692e16776a622b2949 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Thu Nov 16 11:47:46 2017 +0100 x86/shadow: correct SH_LINEAR mapping detection in sh_guess_wrmap() The fix for XSA-243 / CVE-2017-15592 (c/s bf2b4eadcf379) introduced a change in behaviour for sh_guest_wrmap(), where it had to cope with no shadow linear mapping being present. As the name suggests, guest_vtable is a mapping of the guests pagetable, not Xen's pagetable, meaning that it isn't the pagetable we need to check for the shadow linear slot in. The practical upshot is that a shadow HVM vcpu which switches into 4-level paging mode, with an L4 pagetable that contains a mapping which aliases Xen's SH_LINEAR_PT_VIRT_START will fool the safety check for whether a SHADOW_LINEAR mapping is present. As the check passes (when it should have failed), Xen subsequently falls over the missing mapping with a pagefault such as: (XEN) Pagetable walk from ffff8140a0503880: (XEN) L4[0x102] = 000000046c218063 ffffffffffffffff (XEN) L3[0x102] = 000000046c218063 ffffffffffffffff (XEN) L2[0x102] = 000000046c218063 ffffffffffffffff (XEN) L1[0x103] = 0000000000000000 ffffffffffffffff This is part of XSA-243. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Tim Deegan <tim@xxxxxxx> master commit: d20daf4294adbdb9316850566013edb98db7bfbc master date: 2017-11-16 10:38:14 +0100 commit 2098a2d8fe486952e676f20099590458f731af75 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Nov 16 11:47:13 2017 +0100 x86: don't wrongly trigger linear page table assertion _put_page_type() may do multiple iterations until its cmpxchg() succeeds. It invokes set_tlbflush_timestamp() on the first iteration, however. Code inside the function takes care of this, but - the assertion in _put_final_page_type() would trigger on the second iteration if time stamps in a debug build are permitted to be sufficiently much wider than the default 6 bits (see WRAP_MASK in flushtlb.c), - it returning -EINTR (for a continuation to be scheduled) would leave the page inconsistent state (until the re-invocation completes). Make the set_tlbflush_timestamp() invocation conditional, bypassing it (for now) only in the case we really can't tolerate the stamp to be stored. This is part of XSA-240. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: George Dunlap <george.dunlap@xxxxxxxxxx> master commit: 2c458dfcb59f3d9d8a35fc5ffbf780b6ed7a26a6 master date: 2017-11-16 10:37:29 +0100 commit ddfca4005697afd6169153a817bcb527c1520078 Author: Yu Zhang <yu.c.zhang@xxxxxxxxxxxxxxx> Date: Thu Nov 16 11:46:38 2017 +0100 x86/mm: fix race condition in modify_xen_mappings() In modify_xen_mappings(), a L1/L2 page table shall be freed, if all entries of this page table are empty. Corresponding L2/L3 PTE will need be cleared in such scenario. However, concurrent paging structure modifications on different CPUs may cause the L2/L3 PTEs to be already be cleared or set to reference a superpage. Therefore the logic to enumerate the L1/L2 page table and to reset the corresponding L2/L3 PTE need to be protected with spinlock. And the _PAGE_PRESENT and _PAGE_PSE flags need be checked after the lock is obtained. Suggested-by: Jan Beulich <jbeulich@xxxxxxxx> Signed-off-by: Yu Zhang <yu.c.zhang@xxxxxxxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: b9ee1fd7b98064cf27d0f8f1adf1f5359b72c97f master date: 2017-11-14 17:11:26 +0100 commit 80eeaab09a1134f34c3c6912a8acb0c43c7c3ef7 Author: Min He <min.he@xxxxxxxxx> Date: Thu Nov 16 11:46:07 2017 +0100 x86/mm: fix race conditions in map_pages_to_xen() In map_pages_to_xen(), a L2 page table entry may be reset to point to a superpage, and its corresponding L1 page table need be freed in such scenario, when these L1 page table entries are mapping to consecutive page frames and having the same mapping flags. However, variable `pl1e` is not protected by the lock before L1 page table is enumerated. A race condition may happen if this code path is invoked simultaneously on different CPUs. For example, `pl1e` value on CPU0 may hold an obsolete value, pointing to a page which has just been freed on CPU1. Besides, before this page is reused, it will still be holding the old PTEs, referencing consecutive page frames. Consequently the `free_xen_pagetable(l2e_to_l1e(ol2e))` will be triggered on CPU0, resulting the unexpected free of a normal page. This patch fixes the above problem by protecting the `pl1e` with the lock. Also, there're other potential race conditions. For instance, the L2/L3 entry may be modified concurrently on different CPUs, by routines such as map_pages_to_xen(), modify_xen_mappings() etc. To fix this, this patch will check the _PAGE_PRESENT and _PAGE_PSE flags, after the spinlock is obtained, for the corresponding L2/L3 entry. Signed-off-by: Min He <min.he@xxxxxxxxx> Signed-off-by: Yi Zhang <yi.z.zhang@xxxxxxxxx> Signed-off-by: Yu Zhang <yu.c.zhang@xxxxxxxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: a5114662297ad03efc36b52ad365ffa05fb357b7 master date: 2017-11-14 17:10:56 +0100 commit a0bc38e063a1fbade2f796e862aade6c5a68407a Author: Eric Chanudet <chanudete@xxxxxxxxxxxx> Date: Thu Nov 16 11:45:38 2017 +0100 x86/hvm: do not register hpet mmio during s3 cycle Do it once at domain creation (hpet_init). Sleep -> Resume cycles will end up crashing an HVM guest with hpet as the sequence during resume takes the path: -> hvm_s3_suspend -> hpet_reset -> hpet_deinit -> hpet_init -> register_mmio_handler -> hvm_next_io_handler register_mmio_handler will use a new io handler each time, until eventually it reaches NR_IO_HANDLERS, then hvm_next_io_handler calls domain_crash. Signed-off-by: Eric Chanudet <chanudete@xxxxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 015d6738ddff4074668c1d4887bbffd507ed1a7f master date: 2017-11-14 17:09:50 +0100 commit 2224080ea1a80220c1386cdf2f757fdaaecd8da6 Author: George Dunlap <george.dunlap@xxxxxxxxxx> Date: Thu Nov 16 11:44:58 2017 +0100 x86/mm: Make PV linear pagetables optional Allowing pagetables to point to other pagetables of the same level (often called 'linear pagetables') has been included in Xen since its inception; but recently it has been the source of a number of subtle reference-counting bugs. It is not used by Linux or MiniOS; but it is used by NetBSD and Novell Netware. There are significant numbers of people who are never going to use the feature, along with significant numbers who need the feature. Add a Kconfig option for the feature (default to 'y'). Also add a command-line option to control whether PV linear pagetables are allowed (default to 'true'). NB that we leave linear_pt_count in the page struct. It's in a union, so its presence doesn't increase the size of the data struct. Changing the layout of the other elements based on configuration options is asking for trouble however; so we'll just leave it there and ASSERT that it's zero. Reported-by: Jann Horn <jannh@xxxxxxxxxx> Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> master commit: 3285e75dea89afb0ef5b3ee39bd15194bd7cc110 master date: 2017-10-27 14:36:45 +0100 commit 533b9e4fbaa9e98d978cf8322721dcd222caaef2 Author: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> Date: Thu Nov 16 11:44:14 2017 +0100 x86/vpmu: Remove unnecessary call to do_interrupt() This call was left during PVHv1 removal (commit 33e5c32559e1 ("x86: remove PVHv1 code")): - if ( is_pvh_vcpu(sampling) && - !(vpmu_mode & XENPMU_MODE_ALL) && + if ( !(vpmu_mode & XENPMU_MODE_ALL) && !vpmu->arch_vpmu_ops->do_interrupt(regs) ) return; As result of this extra call VPMU no longer works for PV guests on Intel because we effectively lose value of MSR_CORE_PERF_GLOBAL_STATUS. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: 5e2bfc23f7c9a60c01a02c619e1f3d7456ce0e93 master date: 2017-10-27 14:32:38 +0100 commit f8732452d2d4d740455f237f3d9fd14ec923279f Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Nov 16 11:43:40 2017 +0100 x86: fix asm() constraint for GS selector update Exception fixup code may alter the operand, which ought to be reflected in the constraint. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: 65ab53de34851243fb7793ebf12fd92a65f84ddd master date: 2017-10-27 13:49:10 +0100 commit 6453a6a3f27b07cb6597b24816353246ff5ec4e8 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Nov 16 11:43:07 2017 +0100 x86: don't latch wrong (stale) GS base addresses load_segments() writes selector registers before doing any of the base address updates. Any of these selector loads can cause a page fault in case it references the LDT, and the LDT page accessed was only recently installed. Therefore the call tree map_ldt_shadow_page() -> guest_get_eff_kern_l1e() -> toggle_guest_mode() would in such a case wrongly latch the outgoing vCPU's GS.base into the incoming vCPU's recorded state. Split page table toggling from GS handling - neither guest_get_eff_kern_l1e() nor guest_io_okay() need more than the page tables being the kernel ones for the memory access they want to do. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: a711f6f24a7157ae70d1cc32e61b98f23dc0c584 master date: 2017-10-27 13:49:10 +0100 commit 1588e534c240e55730d3a0299b53cc723edfa48c Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Nov 16 11:42:16 2017 +0100 x86: also show FS/GS base addresses when dumping registers Their state may be important to figure the reason for a crash. To not further grow duplicate code, break out a helper function. I realize that (ab)using the control register array here may not be considered the nicest solution, but it seems easier (and less overall overhead) to do so compared to the alternative of introducing another helper structure. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: be7f60b5a39741eab0a8fea0324f7be0cb724cfb master date: 2017-10-24 18:13:13 +0200 commit df07ad1315e4d91f758b1e1e9b3cbd393146956f Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Nov 16 11:41:44 2017 +0100 x86: fix GS-base-dirty determination load_segments() writes the two MSRs in their "canonical" positions (GS_BASE for the user base, SHADOW_GS_BASE for the kernel one) and uses SWAPGS to switch them around if the incoming vCPU is in kernel mode. In order to not leave a stale kernel address in GS_BASE when the incoming guest is in user mode, the check on the outgoing vCPU needs to be dependent upon the mode it is currently in, rather than blindly looking at the user base. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> master commit: 91f85280b9b80852352fcad73d94ed29fafb88da master date: 2017-10-24 18:12:31 +0200 commit 71648cba2671b108555d11d3810fbc71107e202c Author: David Esler <drumandstrum@xxxxxxxxx> Date: Thu Nov 16 11:40:37 2017 +0100 x86/boot: fix early error output In 9180f5365524 a change was made to the send_chr function to take in C-strings and output a character at a time until a NULL was encountered. However, when there is no VGA there is no code to increment the current character position resulting in an endless loop of the first character. This moves the (implicit) increment such that it occurs in all cases. Signed-off-by: David Esler <drumandstrum@xxxxxxxxx> Reviewed-by: Doug Goldstein <cardoe@xxxxxxxxxx> [jb: correct title and description] Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Daniel Kiper <daniel.kiper@xxxxxxxxxx> master commit: 78e693cc123296db2f79e792cf474544c1ffd064 master date: 2017-10-20 09:29:29 +0200 (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/cgi-bin/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |