|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable test] 122631: trouble: blocked/broken/fail/pass
flight 122631 xen-unstable real [real] http://logs.test-lab.xenproject.org/osstest/logs/122631/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: test-arm64-arm64-xl-credit2 <job status> broken build-arm64-libvirt <job status> broken test-arm64-arm64-xl <job status> broken build-arm64-libvirt 4 host-install(4) broken REGR. vs. 122580 test-arm64-arm64-xl 4 host-install(4) broken REGR. vs. 122580 test-arm64-arm64-examine 5 host-install broken REGR. vs. 122580 test-arm64-arm64-xl-xsm <job status> broken in 122621 Tests which are failing intermittently (not blocking): test-arm64-arm64-xl-xsm 4 host-install(4) broken in 122621 pass in 122631 test-arm64-arm64-xl-credit2 4 host-install(4) broken pass in 122621 test-amd64-amd64-pair 21 guest-start/debian fail pass in 122621 test-amd64-amd64-xl-xsm 12 guest-start fail pass in 122621 test-amd64-i386-xl-xsm 12 guest-start fail pass in 122621 test-amd64-amd64-libvirt 18 guest-start/debian.repeat fail pass in 122621 test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm 16 guest-localmigrate/x10 fail pass in 122621 test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm 18 guest-start/debianhvm.repeat fail pass in 122621 test-amd64-amd64-xl-qemuu-ovmf-amd64 18 guest-start/debianhvm.repeat fail pass in 122621 test-amd64-amd64-xl-qemut-ws16-amd64 16 guest-localmigrate/x10 fail pass in 122621 Tests which did not succeed, but are not blocking: test-arm64-arm64-libvirt-xsm 1 build-check(1) blocked n/a test-amd64-amd64-xl-qemut-ws16-amd64 17 guest-stop fail in 122621 like 122580 test-arm64-arm64-xl-credit2 13 migrate-support-check fail in 122621 never pass test-arm64-arm64-xl-credit2 14 saverestore-support-check fail in 122621 never pass test-arm64-arm64-libvirt-xsm 13 migrate-support-check fail in 122621 never pass test-arm64-arm64-libvirt-xsm 14 saverestore-support-check fail in 122621 never pass test-amd64-amd64-xl-qemut-win7-amd64 17 guest-stop fail like 122580 test-armhf-armhf-libvirt-xsm 14 saverestore-support-check fail like 122580 test-amd64-i386-xl-qemuu-win7-amd64 17 guest-stop fail like 122580 test-armhf-armhf-libvirt 14 saverestore-support-check fail like 122580 test-amd64-i386-xl-qemut-win7-amd64 17 guest-stop fail like 122580 test-amd64-i386-xl-qemuu-ws16-amd64 17 guest-stop fail like 122580 test-armhf-armhf-libvirt-raw 13 saverestore-support-check fail like 122580 test-amd64-amd64-xl-qemuu-ws16-amd64 17 guest-stop fail like 122580 test-amd64-amd64-xl-qemuu-win7-amd64 17 guest-stop fail like 122580 test-amd64-amd64-xl-pvhv2-intel 12 guest-start fail never pass test-amd64-amd64-xl-pvhv2-amd 12 guest-start fail never pass test-amd64-i386-xl-pvshim 12 guest-start fail never pass test-amd64-i386-libvirt 13 migrate-support-check fail never pass test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-amd64-i386-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-amd64-libvirt-xsm 13 migrate-support-check fail never pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 13 migrate-support-check fail never pass test-armhf-armhf-xl-arndale 14 saverestore-support-check fail never pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm 11 migrate-support-check fail never pass test-amd64-amd64-qemuu-nested-amd 17 debian-hvm-install/l1/l2 fail never pass test-amd64-amd64-libvirt-vhd 12 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 13 migrate-support-check fail never pass test-armhf-armhf-xl-rtds 14 saverestore-support-check fail never pass test-armhf-armhf-xl-xsm 13 migrate-support-check fail never pass test-armhf-armhf-xl-xsm 14 saverestore-support-check fail never pass test-armhf-armhf-xl 13 migrate-support-check fail never pass test-armhf-armhf-xl 14 saverestore-support-check fail never pass test-armhf-armhf-xl-cubietruck 13 migrate-support-check fail never pass test-armhf-armhf-xl-cubietruck 14 saverestore-support-check fail never pass test-armhf-armhf-xl-multivcpu 13 migrate-support-check fail never pass test-armhf-armhf-xl-multivcpu 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt-xsm 13 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 13 migrate-support-check fail never pass test-armhf-armhf-xl-credit2 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt 13 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 13 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 14 saverestore-support-check fail never pass test-armhf-armhf-libvirt-raw 12 migrate-support-check fail never pass test-amd64-i386-xl-qemut-ws16-amd64 17 guest-stop fail never pass test-armhf-armhf-xl-vhd 12 migrate-support-check fail never pass test-armhf-armhf-xl-vhd 13 saverestore-support-check fail never pass test-amd64-i386-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-amd64-xl-qemuu-win10-i386 10 windows-install fail never pass test-amd64-amd64-xl-qemut-win10-i386 10 windows-install fail never pass test-amd64-i386-xl-qemut-win10-i386 10 windows-install fail never pass version targeted for testing: xen e38e285a51c805cfeee4693962df23e39b3c3bd7 baseline version: xen 0306a1311d02ea52b4a9a9bc339f8bab9354c5e3 Last test of basis 122580 2018-05-03 12:11:46 Z 5 days Failing since 122601 2018-05-04 12:54:03 Z 4 days 3 attempts Testing same since 122621 2018-05-06 01:06:21 Z 2 days 2 attempts ------------------------------------------------------------ People who touched revisions under test: George Dunlap <george.dunlap@xxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Juergen Gross <jgross@xxxxxxxx> Olaf Hering <olaf@xxxxxxxxx> Wei Liu <wei.liu2@xxxxxxxxxx> jobs: build-amd64-xsm pass build-arm64-xsm pass build-armhf-xsm pass build-i386-xsm pass build-amd64-xtf pass build-amd64 pass build-arm64 pass build-armhf pass build-i386 pass build-amd64-libvirt pass build-arm64-libvirt broken build-armhf-libvirt pass build-i386-libvirt pass build-amd64-prev pass build-i386-prev pass build-amd64-pvops pass build-arm64-pvops pass build-armhf-pvops pass build-i386-pvops pass build-amd64-rumprun pass build-i386-rumprun pass test-xtf-amd64-amd64-1 pass test-xtf-amd64-amd64-2 pass test-xtf-amd64-amd64-3 pass test-xtf-amd64-amd64-4 pass test-xtf-amd64-amd64-5 pass test-amd64-amd64-xl pass test-arm64-arm64-xl broken test-armhf-armhf-xl pass test-amd64-i386-xl pass test-amd64-amd64-xl-qemut-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-debianhvm-amd64-xsm pass test-amd64-amd64-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-i386-libvirt-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-xsm fail test-amd64-i386-xl-qemuu-debianhvm-amd64-xsm pass test-amd64-amd64-xl-qemut-stubdom-debianhvm-amd64-xsm pass test-amd64-i386-xl-qemut-stubdom-debianhvm-amd64-xsm fail test-amd64-amd64-libvirt-xsm pass test-arm64-arm64-libvirt-xsm blocked test-armhf-armhf-libvirt-xsm pass test-amd64-i386-libvirt-xsm pass test-amd64-amd64-xl-xsm fail test-arm64-arm64-xl-xsm pass test-armhf-armhf-xl-xsm pass test-amd64-i386-xl-xsm fail test-amd64-amd64-qemuu-nested-amd fail test-amd64-amd64-xl-pvhv2-amd fail test-amd64-i386-qemut-rhel6hvm-amd pass test-amd64-i386-qemuu-rhel6hvm-amd pass test-amd64-amd64-xl-qemut-debianhvm-amd64 pass test-amd64-i386-xl-qemut-debianhvm-amd64 pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-xl-qemuu-debianhvm-amd64 pass test-amd64-i386-freebsd10-amd64 pass test-amd64-amd64-xl-qemuu-ovmf-amd64 fail test-amd64-i386-xl-qemuu-ovmf-amd64 pass test-amd64-amd64-rumprun-amd64 pass test-amd64-amd64-xl-qemut-win7-amd64 fail test-amd64-i386-xl-qemut-win7-amd64 fail test-amd64-amd64-xl-qemuu-win7-amd64 fail test-amd64-i386-xl-qemuu-win7-amd64 fail test-amd64-amd64-xl-qemut-ws16-amd64 fail test-amd64-i386-xl-qemut-ws16-amd64 fail test-amd64-amd64-xl-qemuu-ws16-amd64 fail test-amd64-i386-xl-qemuu-ws16-amd64 fail test-armhf-armhf-xl-arndale pass test-amd64-amd64-xl-credit2 pass test-arm64-arm64-xl-credit2 broken test-armhf-armhf-xl-credit2 pass test-armhf-armhf-xl-cubietruck pass test-amd64-amd64-examine pass test-arm64-arm64-examine fail test-armhf-armhf-examine pass test-amd64-i386-examine pass test-amd64-i386-freebsd10-i386 pass test-amd64-i386-rumprun-i386 pass test-amd64-amd64-xl-qemut-win10-i386 fail test-amd64-i386-xl-qemut-win10-i386 fail test-amd64-amd64-xl-qemuu-win10-i386 fail test-amd64-i386-xl-qemuu-win10-i386 fail test-amd64-amd64-qemuu-nested-intel pass test-amd64-amd64-xl-pvhv2-intel fail test-amd64-i386-qemut-rhel6hvm-intel pass test-amd64-i386-qemuu-rhel6hvm-intel pass test-amd64-amd64-libvirt fail test-armhf-armhf-libvirt pass test-amd64-i386-libvirt pass test-amd64-amd64-livepatch pass test-amd64-i386-livepatch pass test-amd64-amd64-migrupgrade pass test-amd64-i386-migrupgrade pass test-amd64-amd64-xl-multivcpu pass test-armhf-armhf-xl-multivcpu pass test-amd64-amd64-pair fail test-amd64-i386-pair pass test-amd64-amd64-libvirt-pair pass test-amd64-i386-libvirt-pair pass test-amd64-amd64-amd64-pvgrub pass test-amd64-amd64-i386-pvgrub pass test-amd64-amd64-xl-pvshim pass test-amd64-i386-xl-pvshim fail test-amd64-amd64-pygrub pass test-amd64-amd64-xl-qcow2 pass test-armhf-armhf-libvirt-raw pass test-amd64-i386-xl-raw pass test-amd64-amd64-xl-rtds pass test-armhf-armhf-xl-rtds pass test-amd64-amd64-xl-qemuu-debianhvm-amd64-shadow pass test-amd64-i386-xl-qemuu-debianhvm-amd64-shadow pass test-amd64-amd64-xl-shadow pass test-amd64-i386-xl-shadow pass test-amd64-amd64-libvirt-vhd pass test-armhf-armhf-xl-vhd pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-job test-arm64-arm64-xl-credit2 broken broken-job build-arm64-libvirt broken broken-job test-arm64-arm64-xl broken broken-step build-arm64-libvirt host-install(4) broken-step test-arm64-arm64-xl-credit2 host-install(4) broken-step test-arm64-arm64-xl host-install(4) broken-step test-arm64-arm64-examine host-install broken-job test-arm64-arm64-xl-xsm broken broken-job test-arm64-arm64-xl broken Not pushing. ------------------------------------------------------------ commit e38e285a51c805cfeee4693962df23e39b3c3bd7 Author: Wei Liu <wei.liu2@xxxxxxxxxx> Date: Fri May 4 16:08:04 2018 +0100 docs: fix xpti command line option doc Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> commit 5c81d260c244026ea74632faa3c6d0a00cc76469 Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:18 2018 +0200 xen/x86: use PCID feature Avoid flushing the complete TLB when switching %cr3 for mitigation of Meltdown by using the PCID feature if available. We are using 4 PCID values for a 64 bit pv domain subject to XPTI and 2 values for the non-XPTI case: - guest active and in kernel mode - guest active and in user mode - hypervisor active and guest in user mode (XPTI only) - hypervisor active and guest in kernel mode (XPTI only) We use PCID only if PCID _and_ INVPCID are supported. With PCID in use we disable global pages in cr4. A command line parameter controls in which cases PCID is being used. As the non-XPTI case has shown not to perform better with PCID at least on some machines the default is to use PCID only for domains subject to XPTI. With PCID enabled we always disable global pages. This avoids having to either flush the complete TLB or do a cycle through all PCID values when invalidating a single global page. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 1a32c9868711b4ee883ebb6f8807e08d70a920be Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:17 2018 +0200 xen/x86: add some cr3 helpers Add some helper macros to access the address and pcid parts of cr3. Use those helpers where appropriate. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit a5407c1d8c6c0cac96d3e84e7b2b25b18fa2bf4d Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:16 2018 +0200 xen/x86: convert pv_guest_cr4_to_real_cr4() to a function pv_guest_cr4_to_real_cr4() is becoming more and more complex. Convert it from a macro to an ordinary function. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 065a499f78d5b644fa586e3e66f88949821e4f8c Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:15 2018 +0200 xen/x86: use flag byte for decision whether xen_cr3 is valid Today cpu_info->xen_cr3 is either 0 to indicate %cr3 doesn't need to be switched on entry to Xen, or negative for keeping the value while indicating not to restore %cr3, or positive in case %cr3 is to be restored. Switch to use a flag byte instead of a negative xen_cr3 value in order to allow %cr3 values with the high bit set in case we want to keep TLB entries when using the PCID feature. This reduces the number of branches in interrupt handling and results in better performance (e.g. parallel make of the Xen hypervisor on my system was using about 3% less system time). Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit d543fa409358a9128d3629dcb28daae28c2d150f Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:14 2018 +0200 xen/x86: disable global pages for domains with XPTI active Instead of flushing the TLB from global pages when switching address spaces with XPTI being active just disable global pages via %cr4 completely when a domain subject to XPTI is active. This avoids the need for extra TLB flushes as loading %cr3 will remove all TLB entries. In order to avoid states with cr3/cr4 having inconsistent values (e.g. global pages being activated while cr3 already specifies a XPTI address space) move loading of the new cr4 value to write_ptbase() (actually to switch_cr3_cr4() called by write_ptbase()). This requires to use switch_cr3_cr4() instead of write_ptbase() when building dom0 in order to avoid setting cr4 with cr4.smap set. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 94a992bccdbf656a5a7a0b585c9f140fccc02674 Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:13 2018 +0200 xen/x86: use invpcid for flushing the TLB If possible use the INVPCID instruction for flushing the TLB instead of toggling cr4.pge for that purpose. While at it remove the dependency on cr4.pge being required for mtrr loading, as this will be required later anyway. Add a command line option "invpcid" for controlling the use of INVPCID (default to true). Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 0d3e7f0b6bf01fbd6250fd3408a22fead1601bf0 Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:12 2018 +0200 xen/x86: support per-domain flag for xpti Instead of switching XPTI globally on or off add a per-domain flag for that purpose. This allows to modify the xpti boot parameter to support running dom0 without Meltdown mitigations. Using "xpti=no-dom0" as boot parameter will achieve that. Move the xpti boot parameter handling to xen/arch/x86/pv/domain.c as it is pv-domain specific. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit cda05dcae6732fc9c5b782a97a09b5a0f0dd4b81 Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:11 2018 +0200 xen/x86: add a function for modifying cr3 Instead of having multiple places with more or less identical asm statements just have one function doing a write to cr3. As this function should be named write_cr3() rename the current write_cr3() function to switch_cr3(). Suggested-by: Andrew Copper <andrew.cooper3@xxxxxxxxxx> Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 18173843a573a2691121d34780a011ce1dd5138c Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Apr 26 13:33:10 2018 +0200 x86/xpti: avoid copying L4 page table contents when possible For mitigation of Meltdown the current L4 page table is copied to the cpu local root page table each time a 64 bit pv guest is entered. Copying can be avoided in cases where the guest L4 page table hasn't been modified while running the hypervisor, e.g. when handling interrupts or any hypercall not modifying the L4 page table or %cr3. So add a per-cpu flag indicating whether the copying should be performed and set that flag only when loading a new %cr3 or modifying the L4 page table. This includes synchronization of the cpu local root page table with other cpus, so add a special synchronization flag for that case. A simple performance check (compiling the hypervisor via "make -j 4") in dom0 with 4 vcpus shows a significant improvement: - real time drops from 112 seconds to 103 seconds - system time drops from 142 seconds to 131 seconds Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 4611f529c0e39493a3945641cc161967a864d6b5 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu May 3 17:35:51 2018 +0200 x86: fix return value checks of set_guest_{machinecheck,nmi}_trapbounce Commit 0142064421 ("x86/traps: move set_guest_{machine,nmi}_trapbounce") converted the functions' return types from int to bool without also correcting the checks in assembly code: The ABI does not guarantee sub- 32-bit return values to be promoted to 32 bits. Take the liberty and also adjust the number of spaces used in the compat code, such that both code sequences end up similar (they already are in the non-compat case). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> commit 9a36de177c16d6423a07ad61f1c7af5274769aae Author: George Dunlap <george.dunlap@xxxxxxxxxx> Date: Tue May 1 18:13:27 2018 +0100 xen/schedule: Fix races in vcpu migration The current sequence to initiate vcpu migration is inefficent and error-prone: - The initiator sets VPF_migraging with the lock held, then drops the lock and calls vcpu_sleep_nosync(), which immediately grabs the lock again - A number of places unnecessarily check for v->pause_flags in between those two - Every call to vcpu_migrate() must be prefaced with vcpu_sleep_nosync() or introduce a race condition; this code duplication is error-prone - In the event that v->is_running is true at the beginning of vcpu_migrate(), it's almost certain that vcpu_migrate() will end up being called in context_switch() as well; we might as well simply let it run there and save the duplicated effort (which will be non-negligible). The result is that Credit1 has several races which result in runqueue <-> v->processor invariants being violated (triggering ASSERTs in debug builds and strange bugs in production builds). Instead, introduce vcpu_migrate_start() to initiate the process. vcpu_migrate_start() is called with the scheduling lock held. It not only sets VPF_migrating, but also calls vcpu_sleep_nosync_locked() (which will automatically do nothing if there's nothing to do). Rename vcpu_migrate() to vcpu_migrate_finish(). Check for v->is_running and pause_flags & VPF_migrating at the top and return if appropriate. Then the way to initiate migration is consistently: * Grab lock * vcpu_migrate_start() * Release lock * vcpu_migrate_finish() Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx> Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx> Tested-by: Olaf Hering <olaf@xxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> commit da0a5e00de8aa93f2a7482d138dbee9dec2aa5c2 Author: George Dunlap <george.dunlap@xxxxxxxxxx> Date: Wed May 2 11:09:18 2018 +0100 xen: Introduce vcpu_sleep_nosync_locked() There are a lot of places which release a lock before calling vcpu_sleep_nosync(), which then just grabs the lock again. This is not only a waste of time, but leads to more code duplication (since you have to copy-and-paste recipes rather than calling a unified function), which in turn leads to an increased chance of bugs. Introduce vcpu_sleep_nosync_locked(), which can be called if you already hold the schedule lock. Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx> Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> commit 47876e320b65ca31dacf887fd3654f59e9c89810 Author: George Dunlap <george.dunlap@xxxxxxxxxx> Date: Wed May 2 11:09:17 2018 +0100 xen/schedule.c: Fix up whitespace Delete tabs and trailing whitespace. No functional change. Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> Release-acked-by: Juergen Gross <jgross@xxxxxxxx> (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |