|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [ovmf baseline-only test] 74905: trouble: blocked/broken/pass
This run is configured for baseline tests only. flight 74905 ovmf real [real] http://osstest.xs.citrite.net/~osstest/testlogs/logs/74905/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-amd64-xsm <job status> broken test-amd64-i386-xl-qemuu-ovmf-amd64 <job status> broken build-amd64-pvops <job status> broken build-i386-libvirt <job status> broken build-i386-libvirt 4 host-install(4) broken REGR. vs. 74901 build-amd64-xsm 4 host-install(4) broken REGR. vs. 74901 build-amd64-pvops 4 host-install(4) broken REGR. vs. 74901 test-amd64-i386-xl-qemuu-ovmf-amd64 4 host-install(4) broken REGR. vs. 74901 Tests which did not succeed, but are not blocking: test-amd64-amd64-xl-qemuu-ovmf-amd64 1 build-check(1) blocked n/a version targeted for testing: ovmf 3b03b5e990f8bb347dfdb91926d8ef015d0b607e baseline version: ovmf 8e586296c114f630188cfe4c76df91a1e2b7a5b2 Last test of basis 74901 2018-06-22 18:52:42 Z 1 days Testing same since 74905 2018-06-23 08:49:11 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Girish Pathak <girish.pathak@xxxxxxx> Sudeep Holla <sudeep.holla@xxxxxxx> Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Yunhua Feng <yunhuax.feng@xxxxxxxxx> jobs: build-amd64-xsm broken build-i386-xsm pass build-amd64 pass build-i386 pass build-amd64-libvirt pass build-i386-libvirt broken build-amd64-pvops broken build-i386-pvops pass test-amd64-amd64-xl-qemuu-ovmf-amd64 blocked test-amd64-i386-xl-qemuu-ovmf-amd64 broken ------------------------------------------------------------ sg-report-flight on osstest.xs.citrite.net logs: /home/osstest/logs images: /home/osstest/images Logs, config files, etc. are available at http://osstest.xs.citrite.net/~osstest/testlogs/logs Test harness code can be found at http://xenbits.xensource.com/gitweb?p=osstest.git;a=summary broken-job build-amd64-xsm broken broken-job test-amd64-i386-xl-qemuu-ovmf-amd64 broken broken-job build-amd64-pvops broken broken-job build-i386-libvirt broken broken-step build-i386-libvirt host-install(4) broken-step build-amd64-xsm host-install(4) broken-step build-amd64-pvops host-install(4) broken-step test-amd64-i386-xl-qemuu-ovmf-amd64 host-install(4) Push not applicable. ------------------------------------------------------------ commit 3b03b5e990f8bb347dfdb91926d8ef015d0b607e Author: Girish Pathak <girish.pathak@xxxxxxx> Date: Tue Jun 19 14:53:53 2018 +0100 ArmPkg/ArmScmiDxe: Dynamically allocate buffer for protocol ids Dynamically allocate the buffer to receive the SCMI protocol list. This makes MAX_PROTOCOLS redundant, so it is removed. It also fixes one minor code alignment issue and removes an unused macro PROTOCOL_MASK. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx> Tested-by: Sudeep Holla <sudeep.holla@xxxxxxx> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> commit 889cf68c3cd67617e274526822e553bfb07cd231 Author: Girish Pathak <girish.pathak@xxxxxxx> Date: Tue Jun 19 14:53:52 2018 +0100 ArmPkg/ArmScmiDxe: Fix ASSERT error in SCMI DXE This change fixes a bug in the SCMI DXE which is observed with the upcoming release of the SCP firmware. The PROTOCOL_ID_MASK (0xF) which is used to generate an index in the ProtocolInitFxns is wrong because protocol ids can be anywhere in 0x10 - 15 or 0x80 - FF range. This mask generates the same index for two different protocols e.g. for protocol ids 0x10 and 0x90, which causes duplicate initialization of a protocol resulting in a failure. This change removes the use of PROTOCOL_ID_MASK and instead uses a list of protocol ids and their initialization functions to identify a supported protocol and initialize it. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Girish Pathak <girish.pathak@xxxxxxx> Tested-by: Sudeep Holla <sudeep.holla@xxxxxxx> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx> commit 09ef8e92580caddc24f8f1db6ea0e8223890085f Author: Yunhua Feng <yunhuax.feng@xxxxxxxxx> Date: Sun Jun 17 17:22:21 2018 +0800 BaseTools: introduce !error statement The DSC and FDF file can use `!error` statement. The argument of this statement is an error message, it causes build tool to stop at the location where the statement is encountered and error message following the `!error` statement is output as a message. Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=701 Cc: Liming Gao <liming.gao@xxxxxxxxx> Cc: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Yunhua Feng <yunhuax.feng@xxxxxxxxx> Reviewed-by: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> commit 58cf30f71f03bcf2fbf369d51e05c8f17176e129 Author: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Date: Tue Jun 19 09:08:41 2018 +0800 BaseTools: Enhance BaseTools supports FeaturePcd usage in VFR file Bugzilla 348 only fixed FixedAtBuild Pcd type, now this patch also add support for FeaturePcd type. Fixes: https://bugzilla.tianocore.org/show_bug.cgi?id=348 Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Reviewed-by: Liming Gao <liming.gao@xxxxxxxxx> commit c91fb6b4fc8b484e13ba180fa12c6736908d8017 Author: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Date: Wed Jun 13 09:12:28 2018 +0800 BaseTools: remove the unneeded code Do a clean up to remove the unneeded code. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Yonghong Zhu <yonghong.zhu@xxxxxxxxx> Reviewed-by: Liming Gao <liming.gao@xxxxxxxxx> _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |