|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable-smoke test] 126009: regressions - FAIL
flight 126009 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/126009/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-armhf-armhf-xl 12 guest-start fail REGR. vs. 125923 Tests which did not succeed, but are not blocking: test-amd64-amd64-libvirt 13 migrate-support-check fail never pass version targeted for testing: xen 3e4ec07e14bce81f6ae22c31ff1302d1f297a226 baseline version: xen 3dd454c6c694409aaedd4ed075d6aeace2dd8391 Last test of basis 125923 2018-08-15 16:00:41 Z 1 days Failing since 125928 2018-08-15 19:00:49 Z 1 days 12 attempts Testing same since 126009 2018-08-16 20:00:24 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Christian Lindig <christian.lindig@xxxxxxxxxx> Daniel De Graaf <dgdegra@xxxxxxxxxxxxx> Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Julien Grall <julien.grall@xxxxxxx> Paul Durrant <paul.durrant@xxxxxxxxxx> Wei Liu <wei.liu2@xxxxxxxxxx> Zhenzhong Duan <zhenzhong.duan@xxxxxxxxxx> jobs: build-amd64 pass build-armhf pass build-amd64-libvirt pass test-armhf-armhf-xl fail test-amd64-amd64-xl-qemuu-debianhvm-i386 pass test-amd64-amd64-libvirt pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 3e4ec07e14bce81f6ae22c31ff1302d1f297a226 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Thu Aug 16 16:26:22 2018 +0100 x86/setup: Avoid OoB E820 lookup when calculating the L1TF safe address A number of corner cases (most obviously, no-real-mode and no Multiboot memory map) can end up with e820_raw.nr_map being 0, at which point the L1TF calculation will underflow. Spotted by Coverity. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit afc3f910d3434b540e4e4f51d9fd2723aea22fa2 Author: Jan Beulich <JBeulich@xxxxxxxx> Date: Thu Aug 16 00:49:29 2018 -0600 libxl: fix ARM build after 54ed251dc7 Commit "tools: Rework xc_domain_create() to take a full xen_domctl_createdomain" failed to replace one further instance of xc_config in libxl__arch_domain_save_config(). Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> commit 70d8543950ad045fddcb78ae11302e713ef09c76 Author: Zhenzhong Duan <zhenzhong.duan@xxxxxxxxxx> Date: Thu Aug 16 09:31:57 2018 +0200 x86/mmcfg: remove redundant code in pci_mmcfg_reject_broken() No functional change. Signed-off-by: Zhenzhong Duan <zhenzhong.duan@xxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> commit a9e9837f54973ac45488c24e93ed34cbf20e4c66 Author: Jan Beulich <jbeulich@xxxxxxxx> Date: Thu Aug 16 09:30:59 2018 +0200 gnttab/ARM: properly implement gnttab_create_status_page() Prevent the "BUG_ON(page_get_owner(pg) != d)" in gnttab_unpopulate_status_frames() from triggering. Reported-by: 王磊 <lei19.wang@xxxxxxxxxxx> Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit 7626edeaca972e3e823535dcc44338f6b2f0b21f Author: Paul Durrant <paul.durrant@xxxxxxxxxx> Date: Thu Aug 16 09:27:30 2018 +0200 x86/hvm/emulate: make sure rep I/O emulation does not cross GFN boundaries When emulating a rep I/O operation it is possible that the ioreq will describe a single operation that spans multiple GFNs. This is fine as long as all those GFNs fall within an MMIO region covered by a single device model, but unfortunately the higher levels of the emulation code do not guarantee that. This is something that should almost certainly be fixed, but in the meantime this patch makes sure that MMIO is truncated at GFN boundaries and hence the appropriate device model is re-evaluated for each target GFN. NOTE: This patch does not deal with the case of a single MMIO operation spanning a GFN boundary. That is more complex to deal with and is deferred to a subsequent patch. Signed-off-by: Paul Durrant <paul.durrant@xxxxxxxxxx> Convert calculations to be 32-bit only. Signed-off-by: Jan Beulich <jbeulich@xxxxxxxx> commit 4cdb6bfde2300c75725b3e267469bd6c9eeee55e Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 16 18:27:24 2018 +0000 xen/evtchn: Pass max_evtchn_port into evtchn_init() ... rather than setting it up once domain_create() has completed. This involves constructing a default value for dom0. No practical change in functionality. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> Acked-by: Julien Grall <julien.grall@xxxxxxx> commit 4a83497635056d33fe20ef705f35617b1003a276 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Feb 27 17:39:37 2018 +0000 xen/domctl: Merge set_max_evtchn into createdomain set_max_evtchn is somewhat weird. It was introduced with the event_fifo work, but has never been used. Still, it is a bounding on resources consumed by the event channel infrastructure, and should be part of createdomain, rather than editable after the fact. Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc wrappers), and retain the functionality in XEN_DOMCTL_createdomain. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Daniel De Graaf <dgdegra@xxxxxxxxxxxxx> Acked-by: Christian Lindig <christian.lindig@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> commit 54ed251dc7b85565820019102e533afcea814e16 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 9 14:38:35 2018 +0000 tools: Rework xc_domain_create() to take a full xen_domctl_createdomain In future patches, the structure will be extended with further information, and this is far cleaner than adding extra parameters. The python stubs are the only user which passes NULL for the existing config option (which is actually the arch substructure). Therefore, the #ifdefary moves to compensate. For libxl, pass the full config object down into libxl__arch_domain_{prepare,save}_config(), as there are in practice arch specific settings in the common part of the structure (flags s3_integrity and oos_off specifically). No practical change in behaviour. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Christian Lindig <christian.lindig@xxxxxxxxxx> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit acc2a06c780e9e7ffa6373854735503b7d63a1d0 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Mar 12 10:40:33 2018 +0000 tools/ocaml: Pass a full domctl_create_config into stub_xc_domain_create() The underlying C function is about to make the same change, and the structure is going to gain extra fields. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Christian Lindig <christian.lindig@xxxxxxxxxx> (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |