[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[ovmf baseline-only test] 83741: trouble: blocked/broken

This run is configured for baseline tests only.

flight 83741 ovmf real [real]

Failures and problems with tests :-(

Tests which did not succeed and are blocking,
including tests which could not be run:
 build-amd64-xsm                 <job status>                 broken
 build-i386                      <job status>                 broken
 build-amd64-pvops               <job status>                 broken
 build-i386-xsm                  <job status>                 broken
 build-amd64                     <job status>                 broken
 build-i386-pvops                <job status>                 broken

Tests which did not succeed, but are not blocking:
 test-amd64-amd64-xl-qemuu-ovmf-amd64  1 build-check(1)             blocked n/a
 build-amd64-libvirt           1 build-check(1)               blocked  n/a
 test-amd64-i386-xl-qemuu-ovmf-amd64  1 build-check(1)              blocked n/a
 build-i386-libvirt            1 build-check(1)               blocked  n/a
 build-amd64-pvops             4 host-install(4)       broken baseline untested
 build-i386-xsm                4 host-install(4)       broken baseline untested
 build-i386                    4 host-install(4)       broken baseline untested
 build-i386-pvops              4 host-install(4)       broken baseline untested
 build-amd64-xsm               4 host-install(4)       broken baseline untested
 build-amd64                   4 host-install(4)       broken baseline untested

version targeted for testing:
 ovmf                 c49f298d28cb90c332f8d495a6dfb355bc4014f0
baseline version:
 ovmf                 d868846a4ecc1f3ec28f68e05519960275138771

Last test of basis    83739  2019-03-17 06:55:35 Z    0 days
Testing same since    83741  2019-03-17 18:24:20 Z    0 days    1 attempts

People who touched revisions under test:
  Bob Feng <bob.c.feng@xxxxxxxxx>
  Feng, Bob C <bob.c.feng@xxxxxxxxx>
  Loh Tien Hock <tien.hock.loh@xxxxxxxxx>
  Loh, Tien Hock <tien.hock.loh@xxxxxxxxx>
  Michael Johnson <michael.johnson@xxxxxxxxx>
  mjohn4 <michael.johnson@xxxxxxxxx>

 build-amd64-xsm                                              broken  
 build-i386-xsm                                               broken  
 build-amd64                                                  broken  
 build-i386                                                   broken  
 build-amd64-libvirt                                          blocked 
 build-i386-libvirt                                           blocked 
 build-amd64-pvops                                            broken  
 build-i386-pvops                                             broken  
 test-amd64-amd64-xl-qemuu-ovmf-amd64                         blocked 
 test-amd64-i386-xl-qemuu-ovmf-amd64                          blocked 

sg-report-flight on osstest.xs.citrite.net
logs: /home/osstest/logs
images: /home/osstest/images

Logs, config files, etc. are available at

Test harness code can be found at

broken-job build-amd64-xsm broken
broken-job build-i386 broken
broken-job build-amd64-pvops broken
broken-job build-i386-xsm broken
broken-job build-amd64 broken
broken-job build-i386-pvops broken
broken-step build-amd64-pvops host-install(4)
broken-step build-i386-xsm host-install(4)
broken-step build-i386 host-install(4)
broken-step build-i386-pvops host-install(4)
broken-step build-amd64-xsm host-install(4)
broken-step build-amd64 host-install(4)

Push not applicable.

commit c49f298d28cb90c332f8d495a6dfb355bc4014f0
Author: Loh, Tien Hock <tien.hock.loh@xxxxxxxxx>
Date:   Fri Feb 22 15:58:03 2019 +0800

    EmbeddedPkg/MmcDxe: Enable 4-bit mode even if SD_HIGH_SPEED is not supported
    If SD doesn't support SD_HIGH_SPEED, function should still continue to
    setup SD to go into 4 bits more if it is supported. Currently, the code
    inadvertently exits early, but with a EFI_SUCCESS return code, and so
    execution proceeds without ever attempting to enable 4-bit mode.
    Since not having SD_HIGH_SPEED support is not an error, downgrade the
    message that reports this to DEBUG_INFO.
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Loh Tien Hock <tien.hock.loh@xxxxxxxxx>
    Reviewed-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>

commit b0189eac00a5a97ecf4697bfe22d49aa47e39162
Author: mjohn4 <michael.johnson@xxxxxxxxx>
Date:   Fri Nov 2 10:02:10 2018 +0800

    BaseTools: Explicitly close files after readlines
    Rework some file open().readlines to open, readlines, close.
    This prevents excessive file handles being open at the same time,
    which may be a problem with alternative python environments.
    Cc: Liming Gao <liming.gao@xxxxxxxxx>
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Michael Johnson <michael.johnson@xxxxxxxxx>
    Reviewed-by: Bob Feng <bob.c.feng@xxxxxxxxx>

commit dbe05cb1c0386b6c6abc32b771499acc28a27520
Author: Feng, Bob C <bob.c.feng@xxxxxxxxx>
Date:   Thu Mar 14 22:47:32 2019 +0800

    BaseTools: Fixed the issue of BaseTools Make cleanall failed.
    There is duplicated $(PYTHON_COMMAND) in the
    command of cleanall
    Contributed-under: TianoCore Contribution Agreement 1.1
    Signed-off-by: Bob Feng <bob.c.feng@xxxxxxxxx>
    Cc: Liming Gao <liming.gao@xxxxxxxxx>
    Reviewed-by: Jaben Carsey <jaben.carsey@xxxxxxxxx>

osstest-output mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.