|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable-smoke test] 134200: trouble: blocked/broken/pass
flight 134200 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/134200/ Failures and problems with tests :-( Tests which did not succeed and are blocking, including tests which could not be run: build-arm64-xsm <job status> broken build-arm64-xsm 4 host-install(4) broken REGR. vs. 133991 Tests which did not succeed, but are not blocking: test-arm64-arm64-xl-xsm 1 build-check(1) blocked n/a test-amd64-amd64-libvirt 13 migrate-support-check fail never pass test-armhf-armhf-xl 13 migrate-support-check fail never pass test-armhf-armhf-xl 14 saverestore-support-check fail never pass version targeted for testing: xen 12381e20b5c2cb2f54601bef47c4f6e43acf3833 baseline version: xen cb70a26f78848fe45f593f7ebc9cfaac760a791b Last test of basis 133991 2019-03-22 15:00:46 Z 7 days Failing since 134068 2019-03-25 12:00:51 Z 4 days 20 attempts Testing same since 134200 2019-03-30 00:00:39 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Juergen Gross <jgross@xxxxxxxx> Wei Liu <wei.liu2@xxxxxxxxxx> jobs: build-arm64-xsm broken build-amd64 pass build-armhf pass build-amd64-libvirt pass test-armhf-armhf-xl pass test-arm64-arm64-xl-xsm blocked test-amd64-amd64-xl-qemuu-debianhvm-i386 pass test-amd64-amd64-libvirt pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary broken-job build-arm64-xsm broken broken-step build-arm64-xsm host-install(4) Not pushing. ------------------------------------------------------------ commit 12381e20b5c2cb2f54601bef47c4f6e43acf3833 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 29 13:32:09 2019 +0000 xen/timers: Document and improve the representation of the timer heap metadata The {GET,SET}_HEAP_{SIZE,LIMIT}() macros implement some completely undocumented pointer misuse to store the size and limit information. In practice, heap[0] is never a timer pointer, and used to stash the metadata instead. Extend the HEAP OPERATIONS comment to include this detail. Introduce a structure representing the heap metadata, and a static inline function to perfom the type punning. Replace all of the above macros with an equivelent expression involving the heap_metadata() helper. Note that I deliberately haven't rearranged the surrounding code - this allows the correctness of the transformation to be checked by confirming that the compiled binary is identical. This also removes two cases of a macro argument with side effects, which only worked correctly because the arguments were only evaluated once. Finally, fix up the type of dummy_heap. The old code functioned correctly, but only by virtue of confusing a discrete object and a single-entry array. Change its type to match the intended semantics, and drop the redundant initialisation in timer_init(). No functional change. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 753ba43d6d16e688f688e01e1c77463ea2c6ec9f Author: Juergen Gross <jgross@xxxxxxxx> Date: Thu Mar 28 16:46:22 2019 +0100 xen/sched: fix credit2 smt idle handling Credit2's smt_idle_mask_set() and smt_idle_mask_clear() are used to identify idle cores where vcpus can be moved to. A core is thought to be idle when all siblings are known to have the idle vcpu running on them. Unfortunately the information of a vcpu running on a cpu is per runqueue. So in case not all siblings are in the same runqueue a core will never be regarded to be idle, as the sibling not in the runqueue is never known to run the idle vcpu. Use a credit2 specific cpumask of siblings with only those cpus being marked which are in the same runqueue as the cpu in question. Signed-off-by: Juergen Gross <jgross@xxxxxxxx> Reviewed-by: Dario Faggioli <dfaggioli@xxxxxxxx> commit e88afede8cbc18032bcab49b3a25b472d5516cf5 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Jul 10 13:53:21 2018 +0100 libx86: Recalculate synthesised cpuid_policy fields when appropriate When filling a policy, either from CPUID or an incomming leaf stream, recalculate the synthesised vendor value. All callers are expected to want this behaviour. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 1c2c9f85dd36bd908441b37ab73172358509c9b5 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Wed Mar 20 14:56:15 2019 +0000 tools/libxc: Use x86_cpuid_lookup_vendor() rather than opencoding the logic This doesn't address any of the assumptions that "anything which isn't AMD is Intel". This logic is expected to be replaced wholesale with libx86 in the longterm. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 00b4f4d0fb75dc183b499e78d1abcb865dbc30d7 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Jul 10 13:53:21 2018 +0100 x86/cpuid: Drop get_cpu_vendor() completely get_cpu_vendor() tries to do a number of things, and ends up doing none of them well. For calculating the vendor itself, use x86_cpuid_lookup_vendor() which is implemented in a far more efficient manner than looping over cpu_devs[]. For setting up this_cpu, set it up once on the BSP only, rather than latest-takes-precident across the APs. Such a system is probably not going to boot, but this feels like a less dangerous course of action. Adjust the printed errors to be more clear in the mismatch case. This removes the only user of cpu_dev->c_ident[], so drop that field as well. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit e72309ffbe7c4e507649c74749f130cda691131c Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Wed Mar 20 14:05:11 2019 +0000 libx86: Introduce x86_cpuid_lookup_vendor() Also introduce constants for the vendor strings in CPUID leaf 0. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 8eed571409a7f81ec9327cfa95d7c298333e22e4 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Tue Mar 26 14:23:03 2019 +0000 CI: Add a CentOS 6 container and build jobs CentOS 6 is probably the most frequently broken build, so adding it to CI would be a very good move. One problem is that CentOS 6 comes with Python 2.6, and Qemu requires 2.7. There appear to be no sensible ways to get Python 2.7 into a CentOS 6 environments, so modify the build script to skip the Qemu upstream build instead. Additionally, SeaBIOS requires GCC 4.6 or later, so skip it as well. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> commit 1316369dca610352cce3aaf76e90db1cce75ed9f Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Fri Mar 22 11:12:28 2019 +0000 CI: Fix indentation in containerize script The script is mostly indented with spaces, but there are three tabs. Fix them up to be consistent. No functional change. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Wei Liu <wei.liu2@xxxxxxxxxx> (qemu changes not included) _______________________________________________ osstest-output mailing list osstest-output@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/osstest-output
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |