|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [xen-unstable-smoke test] 167051: regressions - FAIL
flight 167051 xen-unstable-smoke real [real] http://logs.test-lab.xenproject.org/osstest/logs/167051/ Regressions :-( Tests which did not succeed and are blocking, including tests which could not be run: test-amd64-amd64-xl-qemuu-debianhvm-amd64 20 guest-start/debianhvm.repeat fail REGR. vs. 166958 test-armhf-armhf-xl 18 guest-start/debian.repeat fail REGR. vs. 166958 Tests which did not succeed, but are not blocking: test-amd64-amd64-libvirt 15 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 15 migrate-support-check fail never pass test-arm64-arm64-xl-xsm 16 saverestore-support-check fail never pass test-armhf-armhf-xl 15 migrate-support-check fail never pass test-armhf-armhf-xl 16 saverestore-support-check fail never pass version targeted for testing: xen 05657c6d1821dfc4e9a618767a942b3555406046 baseline version: xen e7f147bf4ac725492962a501da72f5ab6be682db Last test of basis 166958 2021-11-30 12:00:32 Z 2 days Failing since 166977 2021-12-01 17:08:21 Z 1 days 7 attempts Testing same since 167051 2021-12-03 00:00:28 Z 0 days 1 attempts ------------------------------------------------------------ People who touched revisions under test: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Ayan Kumar Halder <ayan.kumar.halder@xxxxxxxxxx> Ayan Kumar Halder <ayankuma@xxxxxxxxxx> Ian Jackson <iwj@xxxxxxxxxxxxxx> Jan Beulich <jbeulich@xxxxxxxx> Luca Fancellu <luca.fancellu@xxxxxxx> Roger Pau Monne <roger.pau@xxxxxxxxxx> Roger Pau Monné <roger.pau@xxxxxxxxxx> Vikram Garhwal <fnu.vikram@xxxxxxxxxx> jobs: build-arm64-xsm pass build-amd64 pass build-armhf pass build-amd64-libvirt pass test-armhf-armhf-xl fail test-arm64-arm64-xl-xsm pass test-amd64-amd64-xl-qemuu-debianhvm-amd64 fail test-amd64-amd64-libvirt pass ------------------------------------------------------------ sg-report-flight on osstest.test-lab.xenproject.org logs: /home/logs/logs images: /home/logs/images Logs, config files, etc. are available at http://logs.test-lab.xenproject.org/osstest/logs Explanation of these reports, and of osstest in general, is at http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README.email;hb=master http://xenbits.xen.org/gitweb/?p=osstest.git;a=blob;f=README;hb=master Test harness code can be found at http://xenbits.xen.org/gitweb?p=osstest.git;a=summary Not pushing. ------------------------------------------------------------ commit 05657c6d1821dfc4e9a618767a942b3555406046 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 20:11:01 2021 +0000 x86/boot: Support __ro_after_init For security hardening reasons, it advantageous to make setup-once data immutable after boot. Borrow __ro_after_init from Linux. On x86, place .data.ro_after_init at the start of .rodata, excluding it from the early permission restrictions. Re-apply RO restrictions to the whole of .rodata in init_done(), attempting to reform the superpage if possible. For architectures which don't implement __ro_after_init explicitly, variables merges into .data. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 8de86b5cd4353bf2cc415e4563f973f071b4e8a3 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 20:04:11 2021 +0000 x86/boot: Adjust .text/.rodata/etc permissions in one place At the moment, we have two locations selecting restricted permissions, not very far apart on boot, dependent on opposite answers from using_2M_mapping(). The later location however can shatter superpages if needed, while the former cannot. Collect together all the permission adjustments at the slightly later point in boot, as we likely need to shatter a superpage to support __ro_after_init. No functional change. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit c182e89d0b341d2efc930c2e1211d3e866c0effb Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 19:01:50 2021 +0000 x86/boot: Drop xen_virt_end The calculation in __start_xen() for xen_virt_end is an opencoding of ROUNDUP(_end, 2M). This is __2M_rwdata_end as provided by the linker script. This corrects the bound calculations in arch_livepatch_init() and update_xen_mappings() to not enforce 2M alignment when Xen is not compiled with CONFIG_XEN_ALIGN_2M. Furthermore, since 52975142d154 ("x86/boot: Create the l2_xenmap[] mappings dynamically"), there have not been extraneous mappings to delete, meaning that the call to destroy_xen_mappings() has been a no-op. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit ffa5d037c78fe175f31373deec0759ff8cc8d66c Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 19:52:05 2021 +0000 x86/boot: Fix data placement around __high_start() multiboot_ptr should be in __initdata - it is only used on the BSP path. Furthermore, the .align 8 then .long means that stack_start is misaligned. Move both into setup.c, which lets the compiler handle the details correctly, as well as providing proper debug information for them. Declare stack_start in setup.h and avoid extern-ing it locally in smpboot.c. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit 3099ff3ce15481b4f1536470cb87ac0ebf82b7bb Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 19:19:43 2021 +0000 x86/boot: Better describe the pagetable relocation loops The first loop relocates all reachable non-leaf entries in idle_pg_table[], which includes l2_xenmap[511]'s reference to l1_fixmap_x[]. The second loop relocates only leaf mappings in l2_xenmap[], so update the skip condition to be opposite to the first loop. No functional change. Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Acked-by: Jan Beulich <jbeulich@xxxxxxxx> commit a15b143a5f1c20dc6893bc3e50873e308ef61d87 Author: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Date: Mon Nov 29 16:09:08 2021 +0000 x86/boot: Drop incorrect mapping at l2_xenmap[0] It has been 4 years since the default load address changed from 1M to 2M, and _stext ceased residing in l2_xenmap[0]. We should not be inserting an unused mapping. To ensure we don't create mappings accidentally, loop from 0 and obey _PAGE_PRESENT on all entries. Fixes: 7ed93f3a0dff ("x86: change default load address from 1 MiB to 2 MiB") Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> Reviewed-by: Jan Beulich <jbeulich@xxxxxxxx> commit eb41074692094dff1413efb44fa4928a9140aa41 Author: Ayan Kumar Halder <ayan.kumar.halder@xxxxxxxxxx> Date: Tue Nov 30 18:12:38 2021 +0000 bitops: Fix incorrect value in comment GENMASK(30, 21) should be 0x7fe00000. Fixed this in the comment in bitops.h. Signed-off-by: Ayan Kumar Halder <ayankuma@xxxxxxxxxx> Acked-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> [Tweak text, to put an end to any further bikeshedding] Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx> commit 6c1c97e24f830a921a23e3b9694e20493c9986ee Author: Ian Jackson <iwj@xxxxxxxxxxxxxx> Date: Wed Dec 1 18:07:40 2021 +0000 CHANGELOG.md: Start new "unstable" section I have just forward-ported the CHANGELOG.md updates from the stable-4.16 branch. But we need a new section for work in this release cycle. Signed-off-by: Ian Jackson <iwj@xxxxxxxxxxxxxx> commit eef266eb770128db0d5258009b744f0e0c31c9bd Author: Ian Jackson <iwj@xxxxxxxxxxxxxx> Date: Tue Nov 30 11:40:21 2021 +0000 CHANGELOG.md: Set 4.16 version and date Signed-off-by: Ian Jackson <iwj@xxxxxxxxxxxxxx> (cherry picked from commit 36aa64095d0419d52d2466405ac13b9858463f48) commit e058b2d4e5e2ad7ad03941d36ef9243291b35671 Author: Roger Pau Monne <roger.pau@xxxxxxxxxx> Date: Wed Nov 24 12:24:03 2021 +0100 CHANGELOG: add missing entries for work during the 4.16 release cycle Document some of the relevant changes during the 4.16 release cycle. Signed-off-by: Roger Pau Monné <roger.pau@xxxxxxxxxx> Release-Acked-by: Ian Jackson <iwj@xxxxxxxxxxxxxx> (cherry picked from commit e2544a28beacd854f295095d102a8773743ac917) commit 9012687f05adf96440316ce338514db574ebfde0 Author: Luca Fancellu <luca.fancellu@xxxxxxx> Date: Tue Nov 16 15:06:24 2021 +0000 arm/efi: Improve performance requesting filesystem handle Currently, the code used to handle and possibly load from the filesystem modules defined in the DT is allocating and closing the filesystem handle for each module to be loaded. To improve the performance, the filesystem handle pointer is passed through the call stack, requested when it's needed only once and closed if it was allocated. Signed-off-by: Luca Fancellu <luca.fancellu@xxxxxxx> Reviewed-by: Stefano Stabellini <sstabellini@xxxxxxxxxx> commit ad9cf6bde5b90d4c1e5a79a2803e98d6344c27d7 Author: Vikram Garhwal <fnu.vikram@xxxxxxxxxx> Date: Thu Nov 11 23:27:20 2021 -0800 Update libfdt to v1.6.1 Update libfdt to v1.6.1 of libfdt taken from git://github.com/dgibson/dtc. This update is done to support device tree overlays. A few minor changes are done to make it compatible with Xen: fdt_overlay.c: overlay_fixup_phandle() Replace strtoul() with simple_strtoul() as strtoul() is not available in Xen lib and included lib.h. Change char *endptr to const char *endptr. This change is required for using simple_strtoul(). libfdt_env.h: Remaining Xen changes to libfdt_env.h carried over from existing libfdt (v1.4.0) Signed-off-by: Vikram Garhwal <fnu.vikram@xxxxxxxxxx> Reviewed-by: Luca Fancellu <luca.fancellu@xxxxxxx> Tested-by: Luca Fancellu <luca.fancellu@xxxxxxx> Reviewed-by: Julien Grall <jgrall@xxxxxxxxxx> (qemu changes not included)
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |