We have a pair of Overdrive 3000 boxes which we are trying to deploy
in the Xen Project's automatic test (CI) system.
We do most of our testing with Debian as the host operating system. I
am currently using a daily snapshot of debian-installer arm64
stretch. With that, I can get d-i to run to completion and it
generates a system which boots.
However, I see some alarming messages on the serial console. See
below.
I'm concerned in particular by:
* The `WARNING: CPU: 3 PID: 1' which produces a kernel
stack trace
* `Disabling lock debugging due to kernel taint'
* `[Firmware Bug]: IRQ flags corrupted '
Would any of you like to have an opinion ? (Harry: sorry if you're
entirely the wrong person at Softiron to ask this question. Please
pass on my enquiry.)
Thanks,
Ian.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Linux version 4.8.0-2-arm64 (
debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.11-1 (2016-12-02)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Boot CPU: AArch64 Processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] efi: Getting EFI parameters from FDT:
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] efi: EFI v2.40 by American Megatrends
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] efi: ACPI 2.0=0x83ff1c5000 SMBIOS 3.0=0x83ff347798
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] On node 0 totalpages: 4194304
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] DMA zone: 16384 pages used for memmap
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] DMA zone: 0 pages reserved
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] DMA zone: 1048576 pages, LIFO batch:31
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Normal zone: 49152 pages used for memmap
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Normal zone: 3145728 pages, LIFO batch:31
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] psci: probing for conduit method from DT.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] psci: PSCIv0.2 detected in firmware.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] psci: Using standard PSCI v0.2 function IDs
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] percpu: Embedded 22 pages/cpu @ffff8003ffefe000 s50072 r8192 d31848 u90112
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] pcpu-alloc: s50072 r8192 d31848 u90112 alloc=22*4096
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Detected PIPT I-cache on CPU0
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] CPU features: enabling workaround for ARM erratum 832075
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4128768
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.8.0-2-arm64 root=/dev/mapper/laxton0--vg-root ro
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] software IO TLB [mem 0x80fbfff000-0x80fffff000] (64MB) mapped at [ffff8000fbfff000-ffff8000ffffefff]
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Memory: 16348292K/16777216K available (6524K kernel code, 1056K rwdata, 2060K rodata, 3264K init, 621K bss, 428924K reserved, 0K cma-reserved)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Virtual kernel memory layout:
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] .text : 0xffff000008080000 - 0xffff0000086e0000 ( 6528 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] .rodata : 0xffff0000086e0000 - 0xffff0000088f0000 ( 2112 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] .init : 0xffff0000088f0000 - 0xffff000008c20000 ( 3264 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] .data : 0xffff000008c20000 - 0xffff000008d28200 ( 1057 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] .bss : 0xffff000008d28200 - 0xffff000008dc37bc ( 622 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] 0xffff7e0000000000 - 0xffff7e0010000000 ( 256 MB actual)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] memory : 0xffff800000000000 - 0xffff800400000000 ( 16384 MB)
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] Hierarchical RCU implementation.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000]
Build-time adjustment of leaf fanout to 64.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000]
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] NR_IRQS:64 nr_irqs:64 0
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] GIC: Using split EOI/Deactivate mode
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] GICv2m: range[mem 0xe1180000-0xe1180fff], SPI[64:319]
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 250.00MHz (phys).
Jan 4 18:15:08 laxton0 kernel: [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x7350b89c29, max_idle_ns: 881590431910 ns
Jan 4 18:15:08 laxton0 kernel: [ 0.000002] sched_clock: 56 bits at 250MHz, resolution 4ns, wraps every 4398046511102ns
Jan 4 18:15:08 laxton0 kernel: [ 0.000168] Console: colour dummy device 80x25
Jan 4 18:15:08 laxton0 kernel: [ 0.000385] console [tty0] enabled
Jan 4 18:15:08 laxton0 kernel: [ 0.000397] Calibrating delay loop (skipped), value calculated using timer frequency.. 500.00 BogoMIPS (lpj=1000000)
Jan 4 18:15:08 laxton0 kernel: [ 0.000410] pid_max: default: 32768 minimum: 301
Jan 4 18:15:08 laxton0 kernel: [ 0.000501] Security Framework initialized
Jan 4 18:15:08 laxton0 kernel: [ 0.000508] Yama: disabled by default; enable with sysctl kernel.yama.*
Jan 4 18:15:08 laxton0 kernel: [ 0.000520] AppArmor: AppArmor disabled by boot time parameter
Jan 4 18:15:08 laxton0 kernel: [ 0.000553] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 0.000561] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 0.000990] ftrace: allocating 23672 entries in 93 pages
Jan 4 18:15:08 laxton0 kernel: [ 0.026469] /cpus/cpu-map/cluster0/core0: Can't get CPU for leaf core
Jan 4 18:15:08 laxton0 kernel: [ 0.026483] ASID allocator initialised with 65536 entries
Jan 4 18:15:08 laxton0 kernel: [ 0.027154] Remapping and enabling EFI services.
Jan 4 18:15:08 laxton0 kernel: [ 0.027172] EFI remap 0x00000000e1050000 => 0000000020000000
Jan 4 18:15:08 laxton0 kernel: [ 0.027180] EFI remap 0x00000000e1300000 => 0000000020010000
Jan 4 18:15:08 laxton0 kernel: [ 0.027263] EFI remap 0x00000000e8200000 => 0000000020020000
Jan 4 18:15:08 laxton0 kernel: [ 0.027794] EFI remap 0x0000008000000000 => 0000000020200000
Jan 4 18:15:08 laxton0 kernel: [ 0.027820] EFI remap 0x00000083ff227000 => 0000000022087000
Jan 4 18:15:08 laxton0 kernel: [ 0.028015] EFI remap 0x00000083ff34c000 => 00000000221ac000
Jan 4 18:15:08 laxton0 kernel: [ 0.037704] Detected PIPT I-cache on CPU1
Jan 4 18:15:08 laxton0 kernel: [ 0.037723] CPU1: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.050736] Detected PIPT I-cache on CPU2
Jan 4 18:15:08 laxton0 kernel: [ 0.050753] CPU2: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.082285] Detected PIPT I-cache on CPU3
Jan 4 18:15:08 laxton0 kernel: [ 0.082298] CPU3: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.109893] Detected PIPT I-cache on CPU4
Jan 4 18:15:08 laxton0 kernel: [ 0.109909] CPU4: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.133876] Detected PIPT I-cache on CPU5
Jan 4 18:15:08 laxton0 kernel: [ 0.133889] CPU5: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.162001] Detected PIPT I-cache on CPU6
Jan 4 18:15:08 laxton0 kernel: [ 0.162017] CPU6: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.193230] Detected PIPT I-cache on CPU7
Jan 4 18:15:08 laxton0 kernel: [ 0.193242] CPU7: Booted secondary processor [411fd072]
Jan 4 18:15:08 laxton0 kernel: [ 0.193276] Brought up 8 CPUs
Jan 4 18:15:08 laxton0 kernel: [ 0.193344] SMP: Total of 8 processors activated.
Jan 4 18:15:08 laxton0 kernel: [ 0.193351] CPU features: detected feature: 32-bit EL0 Support
Jan 4 18:15:08 laxton0 kernel: [ 0.193359] CPU: All CPU(s) started at EL2
Jan 4 18:15:08 laxton0 kernel: [ 0.193380] alternatives: patching kernel code
Jan 4 18:15:08 laxton0 kernel: [ 0.195104] devtmpfs: initialized
Jan 4 18:15:08 laxton0 kernel: [ 0.196164] SMBIOS 3.0.0 present.
Jan 4 18:15:08 laxton0 kernel: [ 0.196260] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Jan 4 18:15:08 laxton0 kernel: [ 0.196328] pinctrl core: initialized pinctrl subsystem
Jan 4 18:15:08 laxton0 kernel: [ 0.196664] NET: Registered protocol family 16
Jan 4 18:15:08 laxton0 kernel: [ 0.209230] cpuidle: using governor ladder
Jan 4 18:15:08 laxton0 kernel: [ 0.225238] cpuidle: using governor menu
Jan 4 18:15:08 laxton0 kernel: [ 0.225257] vdso: 2 pages (1 code @ ffff0000086e6000, 1 data @ ffff000008c25000)
Jan 4 18:15:08 laxton0 kernel: [ 0.225270] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Jan 4 18:15:08 laxton0 kernel: [ 0.225361] DMA: preallocated 256 KiB pool for atomic allocations
Jan 4 18:15:08 laxton0 kernel: [ 0.225433] Serial: AMBA PL011 UART driver
Jan 4 18:15:08 laxton0 kernel: [ 0.226337] e1010000.serial: ttyAMA0 at MMIO 0xe1010000 (irq = 18, base_baud = 0) is a PL011 rev3
Jan 4 18:15:08 laxton0 kernel: [ 0.784382] console [ttyAMA0] enabled
Jan 4 18:15:08 laxton0 kernel: [ 0.803037] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Jan 4 18:15:08 laxton0 kernel: [ 0.809769] ACPI: Interpreter disabled.
Jan 4 18:15:08 laxton0 kernel: [ 0.813696] vgaarb: loaded
Jan 4 18:15:08 laxton0 kernel: [ 0.816505] ------------[ cut here ]------------
Jan 4 18:15:08 laxton0 kernel: [ 0.821119] WARNING: CPU: 3 PID: 1 at /build/linux-npWAkX/linux-4.8.11/drivers/firmware/efi/runtime-wrappers.c:41 efi_call_virt_check_flags+0x8c/0xb8
Jan 4 18:15:08 laxton0 kernel: [ 0.834498] Modules linked in:
Jan 4 18:15:08 laxton0 kernel: [ 0.837545]
Jan 4 18:15:08 laxton0 kernel: [ 0.839029] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.8.0-2-arm64 #1 Debian 4.8.11-1
Jan 4 18:15:08 laxton0 kernel: [ 0.846939] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016
Jan 4 18:15:08 laxton0 kernel: [ 0.855543] task: ffff8003ebd1ad80 task.stack: ffff8003ebd38000
Jan 4 18:15:08 laxton0 kernel: [ 0.861454] PC is at efi_call_virt_check_flags+0x8c/0xb8
Jan 4 18:15:08 laxton0 kernel: [ 0.866757] LR is at virt_efi_get_next_variable+0x78/0xa8
Jan 4 18:15:08 laxton0 kernel: [ 0.872146] pc : [<ffff00000856983c>] lr : [<ffff000008569f60>] pstate: 00000005
Jan 4 18:15:08 laxton0 kernel: [ 0.879535] sp : ffff8003ebd3bc10
Jan 4 18:15:08 laxton0 kernel: [ 0.882840] x29: ffff8003ebd3bc10 x28: ffff8003ebd3bd88
Jan 4 18:15:08 laxton0 kernel: [ 0.888146] x27: ffff00000893c258 x26: ffff0000088f04c8
Jan 4 18:15:08 laxton0 kernel: [ 0.893453] x25: ffff000008db4000 x24: 0000000000000001
Jan 4 18:15:08 laxton0 kernel: [ 0.898760] x23: ffff8003ebd3bcf8 x22: ffff8003eb4f4c00
Jan 4 18:15:08 laxton0 kernel: [ 0.904066] x21: ffff000008864118 x20: 0000000000000000
Jan 4 18:15:08 laxton0 kernel: [ 0.909372] x19: 00000000000000c0 x18: 000000006fa87e4f
Jan 4 18:15:08 laxton0 kernel: [ 0.914679] x17: 00000000fe2ce6e0 x16: 00000000a3014314
Jan 4 18:15:08 laxton0 kernel: [ 0.919985] x15: 000000004e0811a1 x14: 00000000f7537e82
Jan 4 18:15:08 laxton0 kernel: [ 0.925291] x13: 00000000bd3af235 x12: 0000000082ee58a3
Jan 4 18:15:08 laxton0 kernel: [ 0.930597] x11: 00000000eb86d391 x10: 0000000000000000
Jan 4 18:15:08 laxton0 kernel: [ 0.935903] x9 : 0000000000000000 x8 : ffff8003eb4f5000
Jan 4 18:15:08 laxton0 kernel: [ 0.941210] x7 : 0000000000000000 x6 : 0000000000000001
Jan 4 18:15:08 laxton0 kernel: [ 0.946516] x5 : 00000000220e94ba x4 : 0000000022c61190
Jan 4 18:15:08 laxton0 kernel: [ 0.951822] x3 : ffff8003ebd3bcf8 x2 : 0000000000000010
Jan 4 18:15:08 laxton0 kernel: [ 0.957128] x1 : 0000000000000001 x0 : ffff000008d05000
Jan 4 18:15:08 laxton0 kernel: [ 0.962434]
Jan 4 18:15:08 laxton0 kernel: [ 0.963918] ---[ end trace ffaac7f12b622942 ]---
Jan 4 18:15:08 laxton0 kernel: [ 0.968525] Call trace:
Jan 4 18:15:08 laxton0 kernel: [ 0.970963] Exception stack(0xffff8003ebd3ba20 to 0xffff8003ebd3bb50)
Jan 4 18:15:08 laxton0 kernel: [ 0.977396] ba20: 00000000000000c0 0000800000000000 ffff8003ebd3bc10 ffff00000856983c
Jan 4 18:15:08 laxton0 kernel: [ 0.985219] ba40: 0000000000000005 0000000000000000 0000000022168ff8 ffff8003ebd3bcf8
Jan 4 18:15:08 laxton0 kernel: [ 0.993042] ba60: ffff8003ebd3ba90 0000000022c4c61c ffff8003ebd3baa0 00000000220e94be
Jan 4 18:15:08 laxton0 kernel: [ 1.000865] ba80: ffff8003ebd3bab0 0000000022c5a208 ffff8003ebd3bac0 0000000000000010
Jan 4 18:15:08 laxton0 kernel: [ 1.008688] baa0: 0000000022168ff8 ffff8003ebd3bcf8 ffff8003ebd3bae0 0000000022c4d440
Jan 4 18:15:08 laxton0 kernel: [ 1.016511] bac0: ffff8003ebd3bae0 0000000000000010 0000000022168ff8 000000000004080b
Jan 4 18:15:08 laxton0 kernel: [ 1.024334] bae0: ffff000008d05000 0000000000000001 0000000000000010 ffff8003ebd3bcf8
Jan 4 18:15:08 laxton0 kernel: [ 1.032157] bb00: 0000000022c61190 00000000220e94ba 0000000000000001 0000000000000000
Jan 4 18:15:08 laxton0 kernel: [ 1.039979] bb20: ffff8003eb4f5000 0000000000000000 0000000000000000 00000000eb86d391
Jan 4 18:15:08 laxton0 kernel: [ 1.047802] bb40: 0000000082ee58a3 00000000bd3af235
Jan 4 18:15:08 laxton0 kernel: [ 1.052671] [<ffff00000856983c>] efi_call_virt_check_flags+0x8c/0xb8
Jan 4 18:15:08 laxton0 kernel: [ 1.059016] [<ffff000008569f60>] virt_efi_get_next_variable+0x78/0xa8
Jan 4 18:15:08 laxton0 kernel: [ 1.065447] [<ffff000008567d4c>] efivar_init+0x9c/0x350
Jan 4 18:15:08 laxton0 kernel: [ 1.070664] [<ffff00000892beb0>] efisubsys_init+0xec/0x280
Jan 4 18:15:08 laxton0 kernel: [ 1.076142] [<ffff000008083b4c>] do_one_initcall+0x5c/0x170
Jan 4 18:15:08 laxton0 kernel: [ 1.081707] [<ffff0000088f0de4>] kernel_init_freeable+0x1c8/0x284
Jan 4 18:15:08 laxton0 kernel: [ 1.087792] [<ffff0000086cac30>] kernel_init+0x18/0x108
Jan 4 18:15:08 laxton0 kernel: [ 1.093008] [<ffff000008083690>] ret_from_fork+0x10/0x40
Jan 4 18:15:08 laxton0 kernel: [ 1.098319] Disabling lock debugging due to kernel taint
Jan 4 18:15:08 laxton0 kernel: [ 1.103624] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.112495] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.121365] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.130234] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.139103] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.147972] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.156841] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.165710] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.174578] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.183447] [Firmware Bug]: IRQ flags corrupted (0x000000c0=>0x00000000) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 1.192680] clocksource: Switched to clocksource arch_sys_counter
Jan 4 18:15:08 laxton0 kernel: [ 1.209353] VFS: Disk quotas dquot_6.6.0
Jan 4 18:15:08 laxton0 kernel: [ 1.213308] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.220265] pnp: PnP ACPI: disabled
Jan 4 18:15:08 laxton0 kernel: [ 1.226889] NET: Registered protocol family 2
Jan 4 18:15:08 laxton0 kernel: [ 1.231493] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.239162] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.246162] TCP: Hash tables configured (established 131072 bind 65536)
Jan 4 18:15:08 laxton0 kernel: [ 1.252811] UDP hash table entries: 8192 (order: 6, 262144 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.258951] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.265604] NET: Registered protocol family 1
Jan 4 18:15:08 laxton0 kernel: [ 1.269969] PCI: CLS 0 bytes, default 128
Jan 4 18:15:08 laxton0 kernel: [ 1.270035] Unpacking initramfs...
Jan 4 18:15:08 laxton0 kernel: [ 1.674113] Freeing initrd memory: 17292K (ffff8003fb138000 - ffff8003fc21b000)
Jan 4 18:15:08 laxton0 kernel: [ 1.681613] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
Jan 4 18:15:08 laxton0 kernel: [ 1.690107] futex hash table entries: 2048 (order: 6, 262144 bytes)
Jan 4 18:15:08 laxton0 kernel: [ 1.696466] audit: initializing netlink subsys (disabled)
Jan 4 18:15:08 laxton0 kernel: [ 1.701888] audit: type=2000 audit(1.300:1): initialized
Jan 4 18:15:08 laxton0 kernel: [ 1.707412] Initialise system trusted keyrings
Jan 4 18:15:08 laxton0 kernel: [ 1.711968] workingset: timestamp_bits=46 max_order=22 bucket_order=0
Jan 4 18:15:08 laxton0 kernel: [ 1.718432] zbud: loaded
Jan 4 18:15:08 laxton0 kernel: [ 1.775164] Key type asymmetric registered
Jan 4 18:15:08 laxton0 kernel: [ 1.779258] Asymmetric key parser 'x509' registered
Jan 4 18:15:08 laxton0 kernel: [ 1.784160] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
Jan 4 18:15:08 laxton0 kernel: [ 1.791595] io scheduler noop registered
Jan 4 18:15:08 laxton0 kernel: [ 1.795516] io scheduler deadline registered
Jan 4 18:15:08 laxton0 kernel: [ 1.799789] io scheduler cfq registered (default)
Jan 4 18:15:08 laxton0 kernel: [ 1.804865] OF: PCI: host bridge /smb/pcie@f0000000 ranges:
Jan 4 18:15:08 laxton0 kernel: [ 1.810443] OF: PCI: IO 0xefff0000..0xefffffff -> 0x00000000
Jan 4 18:15:08 laxton0 kernel: [ 1.816361] OF: PCI: MEM 0x40000000..0xbfffffff -> 0x40000000
Jan 4 18:15:08 laxton0 kernel: [ 1.822277] OF: PCI: MEM 0x100000000..0x7fffffffff -> 0x100000000
Jan 4 18:15:08 laxton0 kernel: [ 1.828561] pci-host-generic f0000000.pcie: ECAM at [mem 0xf0000000-0xffffffff] for [bus 00-7f]
Jan 4 18:15:08 laxton0 kernel: [ 1.837325] pci-host-generic f0000000.pcie: PCI host bridge to bus 0000:00
Jan 4 18:15:08 laxton0 kernel: [ 1.844197] pci_bus 0000:00: root bus resource [bus 00-7f]
Jan 4 18:15:08 laxton0 kernel: [ 1.849678] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
Jan 4 18:15:08 laxton0 kernel: [ 1.855854] pci_bus 0000:00: root bus resource [mem 0x40000000-0xbfffffff]
Jan 4 18:15:08 laxton0 kernel: [ 1.862723] pci_bus 0000:00: root bus resource [mem 0x100000000-0x7fffffffff]
Jan 4 18:15:08 laxton0 kernel: [ 1.869859] pci 0000:00:00.0: [1022:1a00] type 00 class 0x060000
Jan 4 18:15:08 laxton0 kernel: [ 1.869954] pci 0000:00:02.0: [1022:1a01] type 00 class 0x060000
Jan 4 18:15:08 laxton0 kernel: [ 1.870424] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Jan 4 18:15:08 laxton0 kernel: [ 1.877140] Serial: AMBA driver
Jan 4 18:15:08 laxton0 kernel: [ 1.880313] msm_serial: driver initialized
Jan 4 18:15:08 laxton0 kernel: [ 1.884513] Unable to detect cache hierarchy from DT for CPU 0
Jan 4 18:15:08 laxton0 kernel: [ 1.890488] mousedev: PS/2 mouse device common for all mice
Jan 4 18:15:08 laxton0 kernel: [ 1.918161] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
Jan 4 18:15:08 laxton0 kernel: [ 1.924575] ledtrig-cpu: registered to indicate activity on CPUs
Jan 4 18:15:08 laxton0 kernel: [ 1.931269] NET: Registered protocol family 10
Jan 4 18:15:08 laxton0 kernel: [ 1.936021] mip6: Mobile IPv6
Jan 4 18:15:08 laxton0 kernel: [ 1.938989] NET: Registered protocol family 17
Jan 4 18:15:08 laxton0 kernel: [ 1.943431] mpls_gso: MPLS GSO support
Jan 4 18:15:08 laxton0 kernel: [ 1.947407] registered taskstats version 1
Jan 4 18:15:08 laxton0 kernel: [ 1.951505] Loading compiled-in X.509 certificates
Jan 4 18:15:08 laxton0 kernel: [ 1.958775] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Jan 4 18:15:08 laxton0 kernel: [ 1.966502] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
Jan 4 18:15:08 laxton0 kernel: [ 1.974018] zswap: loaded using pool lzo/zbud
Jan 4 18:15:08 laxton0 kernel: [ 1.989190] rtc-efi rtc-efi: setting system clock to 2017-01-04 18:14:56 UTC (1483553696)
Jan 4 18:15:08 laxton0 kernel: [ 1.997547] PM: Hibernation image not present or could not be loaded.
Jan 4 18:15:08 laxton0 kernel: [ 1.997598] uart-pl011 e1010000.serial: no DMA platform data
Jan 4 18:15:08 laxton0 kernel: [ 2.004089] Freeing unused kernel memory: 3264K (ffff8000028f0000 - ffff800002c20000)
Jan 4 18:15:08 laxton0 kernel: [ 2.030710] random: systemd-udevd: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.032140] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.032191] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.032885] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.032996] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.033241] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.033399] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.033493] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.033585] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.033675] random: udevadm: uninitialized urandom read (16 bytes read)
Jan 4 18:15:08 laxton0 kernel: [ 2.104720] pps_core: LinuxPPS API ver. 1 registered
Jan 4 18:15:08 laxton0 kernel: [ 2.109691] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@xxxxxxxx>
Jan 4 18:15:08 laxton0 kernel: [ 2.118921] SCSI subsystem initialized
Jan 4 18:15:08 laxton0 kernel: [ 2.119950] PTP clock support registered
Jan 4 18:15:08 laxton0 kernel: [ 2.125197] amd-xgbe e0700000.xgmac eth0: net device enabled
Jan 4 18:15:08 laxton0 kernel: [ 2.125812] amd-xgbe e0900000.xgmac eth1: net device enabled
Jan 4 18:15:08 laxton0 kernel: [ 2.147104] libata version 3.00 loaded.
Jan 4 18:15:08 laxton0 kernel: [ 2.150596] ahci e0300000.sata: SSS flag set, parallel bus scan disabled
Jan 4 18:15:08 laxton0 kernel: [ 2.157336] ahci e0300000.sata: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl platform mode
Jan 4 18:15:08 laxton0 kernel: [ 2.165947] ahci e0300000.sata: flags: 64bit ncq sntf stag led clo only pmp pio ccc apst
Jan 4 18:15:08 laxton0 kernel: [ 2.175733] scsi host0: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.178822] scsi host1: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.181849] scsi host2: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.184869] scsi host3: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.187883] scsi host4: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.190912] scsi host5: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.193934] scsi host6: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.196962] scsi host7: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.199928] ata1: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x100 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.207846] ata2: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x180 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.215760] ata3: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x200 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.223673] ata4: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x280 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.231588] ata5: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x300 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.239502] ata6: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x380 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.247416] ata7: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x400 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.255329] ata8: SATA max UDMA/133 mmio [mem 0xe0300000-0xe03effff] port 0x480 irq 14
Jan 4 18:15:08 laxton0 kernel: [ 2.263331] ahci e0d00000.sata: SSS flag set, parallel bus scan disabled
Jan 4 18:15:08 laxton0 kernel: [ 2.270050] ahci e0d00000.sata: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl platform mode
Jan 4 18:15:08 laxton0 kernel: [ 2.278662] ahci e0d00000.sata: flags: 64bit ncq sntf stag led clo only pmp pio ccc apst
Jan 4 18:15:08 laxton0 kernel: [ 2.288003] scsi host8: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.291040] scsi host9: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.294065] scsi host10: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.297175] scsi host11: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.300279] scsi host12: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.303391] scsi host13: ahci
Jan 4 18:15:08 laxton0 kernel: [ 2.306449] ata9: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x100 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.314364] ata10: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x180 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.322364] ata11: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x200 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.330364] ata12: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x280 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.338363] ata13: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x300 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.346363] ata14: SATA max UDMA/133 mmio [mem 0xe0d00000-0xe0deffff] port 0x380 irq 15
Jan 4 18:15:08 laxton0 kernel: [ 2.666842] ata9: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 2.736693] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 2.743633] ata1.00: ATA-8: ST1000DM003-1SB10C, CC43, max UDMA/133
Jan 4 18:15:08 laxton0 kernel: [ 2.749819] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
Jan 4 18:15:08 laxton0 kernel: [ 2.757521] ata1.00: configured for UDMA/133
Jan 4 18:15:08 laxton0 kernel: [ 2.762005] scsi 0:0:0:0: Direct-Access ATA ST1000DM003-1SB1 CC43 PQ: 0 ANSI: 5
Jan 4 18:15:08 laxton0 kernel: [ 3.114850] ata2: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 3.434899] ata3: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 3.754848] ata4: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 4.074846] ata5: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 4.394887] ata6: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 4.714872] ata7: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 5.034847] ata8: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 5.354843] ata10: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 5.674844] ata11: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 5.994841] ata12: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 6.314848] ata13: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 6.634843] ata14: SATA link down (SStatus 0 SControl 300)
Jan 4 18:15:08 laxton0 kernel: [ 6.648222] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
Jan 4 18:15:08 laxton0 kernel: [ 6.655884] sd 0:0:0:0: [sda] 4096-byte physical blocks
Jan 4 18:15:08 laxton0 kernel: [ 6.661161] sd 0:0:0:0: [sda] Write Protect is off
Jan 4 18:15:08 laxton0 kernel: [ 6.665953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Jan 4 18:15:08 laxton0 kernel: [ 6.665977] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jan 4 18:15:08 laxton0 kernel: [ 6.715544] sda: sda1 sda2 sda3
Jan 4 18:15:08 laxton0 kernel: [ 6.719230] sd 0:0:0:0: [sda] Attached SCSI disk
Jan 4 18:15:08 laxton0 kernel: [ 6.875730] device-mapper: uevent: version 1.0.3
Jan 4 18:15:08 laxton0 kernel: [ 6.880436] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised:
dm-devel@xxxxxxxxxxJan 4 18:15:08 laxton0 kernel: [ 7.202323] random: fast init done
Jan 4 18:15:08 laxton0 kernel: [ 7.330575] PM: Starting manual resume from disk
Jan 4 18:15:08 laxton0 kernel: [ 7.337833] PM: Hibernation image partition 254:1 present
Jan 4 18:15:08 laxton0 kernel: [ 7.337834] PM: Looking for hibernation image.
Jan 4 18:15:08 laxton0 kernel: [ 7.338077] PM: Image not found (code -22)
Jan 4 18:15:08 laxton0 kernel: [ 7.338079] PM: Hibernation image not present or could not be loaded.
Jan 4 18:15:08 laxton0 kernel: [ 7.522571] EXT4-fs (dm-0): mounting ext3 file system using the ext4 subsystem
Jan 4 18:15:08 laxton0 kernel: [ 7.542520] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Jan 4 18:15:08 laxton0 kernel: [ 8.474379] ip_tables: (C) 2000-2006 Netfilter Core Team
Jan 4 18:15:08 laxton0 kernel: [ 8.533486] efi_call_virt_check_flags: 14 callbacks suppressed
Jan 4 18:15:08 laxton0 kernel: [ 8.539320] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.548207] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.556647] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.565521] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.573958] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.582834] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.591269] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.600145] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.608581] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_next_variable
Jan 4 18:15:08 laxton0 kernel: [ 8.617456] [Firmware Bug]: IRQ flags corrupted (0x000001c0=>0x00000100) by EFI get_variable
Jan 4 18:15:08 laxton0 kernel: [ 9.829742] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
Jan 4 18:15:08 laxton0 kernel: [ 10.499377] random: crng init done
Jan 4 18:15:08 laxton0 kernel: [ 11.241534] ipmi message handler version 39.2
Jan 4 18:15:08 laxton0 kernel: [ 11.332404] ipmi_si e0010000.kcs: probing via device tree
Jan 4 18:15:08 laxton0 kernel: [ 11.337828] ipmi_si: Adding device-tree-specified kcs state machine
Jan 4 18:15:08 laxton0 kernel: [ 11.344136] IPMI System Interface driver.
Jan 4 18:15:08 laxton0 kernel: [ 11.348177] ipmi_si: Trying device-tree-specified kcs state machine at mem address 0xe0010000, slave address 0x0, irq 28
Jan 4 18:15:08 laxton0 kernel: [ 11.440970] sd 0:0:0:0: Attached scsi generic sg0 type 0
Jan 4 18:15:08 laxton0 kernel: [ 11.494509] EFI Variables Facility v0.08 2004-May-17
Jan 4 18:15:08 laxton0 kernel: [ 11.633533] pstore: using zlib compression
Jan 4 18:15:08 laxton0 kernel: [ 11.637641] pstore: Registered efi as persistent store backend
Jan 4 18:15:08 laxton0 kernel: [ 11.739550] alg: No test for __ecb-aes-ce (__driver-ecb-aes-ce)
Jan 4 18:15:08 laxton0 kernel: [ 11.747567] alg: No test for __ecb-aes-ce (cryptd(__driver-ecb-aes-ce))
Jan 4 18:15:08 laxton0 kernel: [ 11.976710] ipmi_si e0010000.kcs: Using irq 28
Jan 4 18:15:08 laxton0 kernel: [ 12.198899] Adding 1949692k swap on /dev/mapper/laxton0--vg-swap_1. Priority:-1 extents:1 across:1949692k FS
Jan 4 18:15:08 laxton0 kernel: [ 12.418821] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
Jan 4 18:15:08 laxton0 kernel: [ 12.444614] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Jan 4 18:15:08 laxton0 kernel: [ 13.220364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 4 18:15:08 laxton0 kernel: [ 13.272135] ipmi_si e0010000.kcs: Found new BMC (man_id: 0x000e78, prod_id: 0x0201, dev_id: 0x20)
Jan 4 18:15:08 laxton0 kernel: [ 13.282595] ipmi_si e0010000.kcs: IPMI kcs interface initialized
Jan 4 18:15:08 laxton0 kernel: [ 14.220713] amd-xgbe e0700000.xgmac eth0: Link is Up - 1Gbps/Full - flow control off
Jan 4 18:15:08 laxton0 kernel: [ 14.228486] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
