[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [win-pv-devel] Windows server 2012 R2 domUs problem after save/restore



Il 30/01/2015 15:31, Paul Durrant ha scritto:
-----Original Message-----
From: win-pv-devel-bounces@xxxxxxxxxxxxxxxxxxxx [mailto:win-pv-devel-
bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Fabio Fantoni
Sent: 30 January 2015 14:17
To: Paul Durrant; win-pv-devel@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [win-pv-devel] Windows server 2012 R2 domUs problem after
save/restore

Il 28/01/2015 21:14, Paul Durrant ha scritto:
-----Original Message-----
From: Fabio Fantoni [mailto:fabio.fantoni@xxxxxxx]
Sent: 28 January 2015 09:19
To: Paul Durrant; win-pv-devel@xxxxxxxxxxxxxxxxxxxx
Subject: Re: [win-pv-devel] Windows server 2012 R2 domUs problem
after
save/restore

Il 22/01/2015 16:00, Paul Durrant ha scritto:
-----Original Message-----
From: win-pv-devel-bounces@xxxxxxxxxxxxxxxxxxxx [mailto:win-pv-
devel-
bounces@xxxxxxxxxxxxxxxxxxxx] On Behalf Of Fabio Fantoni
Sent: 22 January 2015 10:10
To: win-pv-devel@xxxxxxxxxxxxxxxxxxxx
Cc: Paul Durrant
Subject: Re: [win-pv-devel] Windows server 2012 R2 domUs problem
after
save/restore

Il 19/01/2015 16:30, Fabio Fantoni ha scritto:
Hi, I installed winpv driver build of 15 january on Windows server
2012 R2 standard 64 bit and have problem after save/restore.
xl save/restore didn't show any errors, trying to connected with rdp I
was unable and with spice I saw screen with data and time (time
update
after restore) but doing ctrl+alt+canc it changed something in screen
only after 5-10 minutes and still without showing login field.

Dom0 is Wheezy with kernel 3.16.7-ckt2-1~bpo70+1 (from official
backport), build of xen based on start of 4.4.2-pre and qemu 1.6 from
xen build.
DomU xl cfg:
name='w2012r2-01'
builder="hvm"
memory=8192
vcpus=4
acpi_s3=0
acpi_s4=0

vif=['bridge=xenbr2,mac=00:16:3e:24:b7:d7','bridge=xenbr10,mac=00:16:3e:
18:2a:f2,script=vif-openvswitch']
#vfb=['vnc=1,vncunused=1,vnclisten="0.0.0.0",keymap=it']
disk=['/mnt/vm/disks/w2012r2-
01.disk1.xm,raw,hda,rw',',raw,hdb,ro,cdrom']
boot='dc'
device_model_version="qemu-xen"
viridian=1
vnc=0
keymap="it"
on_crash="destroy"
vga="stdvga"
spice=1
spicehost='0.0.0.0'
spiceport=6000
spicepasswd="test"
spicevdagent=1
spice_clipboard_sharing=0
spiceusbredirection=4
soundhw="hda"
localtime=1
I added in attachments qemu logs (before and after save/restore)
with
xen trace enabled.

If you need more informations tests tell me and I'll post them.

I have also another small question:
is ms_vm_genid needed for this case? for what I understand is only
for
active directory controller and this it isn't.

Thanks for any reply and sorry for my bad english.


I also tried to uninstall the pv drivers from control panel but windows
crash, minidump in attachments.
I'm re-working the FIFO event channel code at the moment so I'll run a
quick suspend/resume test when I'm done.
     Paul
Thanks for your reply.
I did other tests and seems that save/restore problems with windows
2012
was for missed ms_vm_genid="generate" even if clean for now (no active
directory or other server services enabled nor domain member).
Remain windows crash on winpv drivers uninstall with minidump refer to
xenvif and other important and occasional problem:
network not working after some time and after 2-3 minutes all windows
become unusable.
I hope these problem will be solved by new network pv driver patches,
I'll test them ASAP when build with them will be ready.

I pushed my big series into xenbus today. You should definitely take that; it
fixes several bugs in FIFO event channels and a couple of other things.
    Paul
Thanks.
I tested now new pv drivers build on a windows 7 64 bit domU.
On update I saw a strange thing, xenvif and xennet even if updated
showed message "Ready to use" instead "Driver updated".
After update of all drivers components I rebooted windows but it didn't
start, stay blocked on windows logo, seems there is a critical
regression in latest pv drivers build :(
DomU's qemu log with xen-platform trace in attachment.

I don't see either XENVIF or XENNET loading at all so perhaps the problem is 
with PV storage and Windows is unable to load the drivers? Does this happen if 
you fresh-install a VM? I tested on Win7 64 and didn't see any problem, but it 
was a fresh VM in my case.

   Paul

Is a windows 7 with only few things installed that I use for new xen and pv drivers testing only.
There was installed previous official builds from here:
http://xenproject.org/downloads/windows-pv-drivers.html
Previous update was 2-3 weeks ago and reboot was succesfull, update of today not. I didn't have installed/updated any other software in this domU between the latest 2 pv driver updates.


Thanks for any reply and sorry for my bad english.

_______________________________________________
win-pv-devel mailing list
win-pv-devel@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/win-pv-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.