[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [win-pv-devel] [MirageOS-devel] [PATCH v2 4/6] Add Code Review Guide
From: Lars Kurth <lars.kurth@xxxxxxxxxx> Date: Thursday, 28 November 2019 at 19:39 To: Rich Persaud <persaur@xxxxxxxxx> Cc: 'Jan Beulich' <JBeulich@xxxxxxxx>, "lars.kurth@xxxxxxxxxxxxxx" <lars.kurth@xxxxxxxxxxxxxx>, Stefano Stabellini <sstabellini@xxxxxxxxxx>, "xen-api@xxxxxxxxxxxxxxxxxxxx" <xen-api@xxxxxxxxxxxxxxxxxxxx>, "minios-devel@xxxxxxxxxxxxxxxxxxxx" <minios-devel@xxxxxxxxxxxxxxxxxxxx>, "committers@xxxxxxxxxxxxxx" <committers@xxxxxxxxxxxxxx>, "mirageos-devel@xxxxxxxxxxxxxxxxxxxx" <mirageos-devel@xxxxxxxxxxxxxxxxxxxx>, xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxxx>, "win-pv-devel@xxxxxxxxxxxxxxxxxxxx" <win-pv-devel@xxxxxxxxxxxxxxxxxxxx> Subject: Re: [MirageOS-devel] [PATCH v2 4/6] Add Code Review Guide From: Rich Persaud <persaur@xxxxxxxxx> Date: Thursday, 28 November 2019 at 12:21 To: Lars Kurth <lars.kurth@xxxxxxxxxx> Cc: 'Jan Beulich' <JBeulich@xxxxxxxx>, "lars.kurth@xxxxxxxxxxxxxx" <lars.kurth@xxxxxxxxxxxxxx>, Stefano Stabellini <sstabellini@xxxxxxxxxx>, "xen-api@xxxxxxxxxxxxxxxxxxxx" <xen-api@xxxxxxxxxxxxxxxxxxxx>, "minios-devel@xxxxxxxxxxxxxxxxxxxx" <minios-devel@xxxxxxxxxxxxxxxxxxxx>, "committers@xxxxxxxxxxxxxx" <committers@xxxxxxxxxxxxxx>, "mirageos-devel@xxxxxxxxxxxxxxxxxxxx" <mirageos-devel@xxxxxxxxxxxxxxxxxxxx>, xen-devel <xen-devel@xxxxxxxxxxxxxxxxxxxx>, "win-pv-devel@xxxxxxxxxxxxxxxxxxxx" <win-pv-devel@xxxxxxxxxxxxxxxxxxxx> Subject: Re: [MirageOS-devel] [PATCH v2 4/6] Add Code Review Guide On Nov 28, 2019, at 09:05, Lars Kurth <lars.kurth@xxxxxxxxxx> wrote: On 28/11/2019, 07:37, "Jan Beulich" <jbeulich@xxxxxxxx> wrote: On 28.11.2019 14:06, Lars Kurth wrote: I can certainly add something on the timing , along the lines of * For complex series, consider the time it takes to do reviews (maybe with a guide of LOC per hour) and give reviewers enough time to * For series with design issues or large questions, try and highlight the key open issues in cover letters clearly and solicit feedback from key maintainers who can comment on the open issue. The idea is to save both the contributor and the reviewers time by focussing on what needs to be resolved * Don’t repost a series, unless all review comments are addressed or the reviewers asked you to do so. The problem with this is that this is somewhat in conflict with the "let's focus on the core issues and not get distracted by details early on in a review cycle". In other words, this can only work, if reviewers focus on major issues in early reviews only and do not focus on style, coding standards, etc. But this doesn't make much sense either, because then full re-reviews need to happen anyway on later versions, to also deal with the minor issues. For RFC kind of series omitting style and alike feedback certainly makes sense, but as soon as a patch is non-RFC, it should be considered good to go in by the submitter. OK, I think we have a disconnect between ideal and reality. I see two issues today * Key maintainers don't always review RFC series [they end up at the bottom of the priority list, even though spending time on RFCs will save time elsewhere later]. So the effect is that then the contributor assumes there are no major issues and ends it as a proper series * In practice what has happened often in the past is that design, architecture, assumption flaws are found in early versions of a series. - This usually happens because of an oversight or because there was no design discussion prior to the series being posted and agreed - Common sense would dictate that the biggest benefit for both the reviewer, the contributor and the community as a whole would be to try and focus on such flaws and leave everything aside - Of course there may be value in doing a detailed review of parts of such a series as there may be bits that are unaffected by such a flaw - But there will likely be parts which are not: doing a detailed review of such portions wastes everyone's time So coming back to your point. Ideally, it would be nice if we had the capability to call out parts of a series as "problematic" and treating such parts differently. We may be able to reuse some "Shift Left" terminology, including citations of previous Xen code reviews to illustrate categories of design issues that can be shifted left: https://devopedia.org/shift-left I like that idea. We seem to not have come to a conclusion on this specific topic, but maybe for now it is sufficient to call this out as a potential issue in the guide. Before I send out a new version, it would be good to get at least Jan’s view on the issue. Lars I have a draft version of this series ready, but wanted to check how some of it resonates. Also, I do have open questions, where I am looking for input from seasoned reviewers I propose to add the following section to code-review-guide.md ---- ## <a name="problems"></a>Problematic Patch Reviews A typical waterfall software development process is sequential with the following steps: define requirements, analyse, design, code, test and deploy. Problems uncovered by code review or testing at such a late stage can cause costly redesign and delays. The principle of **[Shift Left](https://devopedia.org/shift-left)** is to take a task that is traditionally performed at a late stage in the process and perform that task at earlier stages. The goal is to save time by avoiding refactoring. Typically, problematic patch reviews uncover issues such as wrong or missed assumptions, a problematic architecture or design, or other bugs that require significant re-implementation of a patch series to fix the issue. The principle of **Shift Left** also applies in code reviews. Let's assume a series has a major flaw: ideally, this flaw would be picked up in the **first or second iteration** of the code review. As significant parts of the code may have to be re-written, it does not make sense for reviewers to highlight minor issues (such as style issues) until major flaws have been addressed. By providing feedback on minor issues reviewers cause the code author and themselves extra work by asking for changes to code, which ultimately may be changed later. The question then becomes, how do code reviewers identify major issues early? ---- This is where I really need help. Are there any tips and recommendations that we could give? I can clearly highlight that we have RFC series, but in practice that does not solve the problem as RFCs don’t get prioritized How do reviewers normally approach a series: do you a) take a big picture view first, or b) do most of you work through a series sequentially I then propose to change the following section in communication-practice.md ---- ### Prioritize significant flaws If a patch or patch series has significant flaws, such as * It is built on wrong assumptions * There are issues with the architecture or the design it does not make sense to do a detailed code review. In such cases, it is best to focus on the major issues first and deal with style and minor issues in a subsequent review. Not all series have significant flaws, but most series have different classes of changes that are required for acceptance: covering a range of major code modifications to minor code style fixes. To avoid misunderstandings between reviewers and contributors, it is important to establish and agree whether a series or part of a series has a significant flaw and agree a course of action. A pragmatic approach would be to * Highlight problematic portions of a series in the cover letter * For the patch author and reviewer(s) to agree that for problematic to omit style and minor issues in the review, until the significant flaw is addressed This saves both the patch author and reviewer(s) time. Note that some background is covered in detail in [Problematic Patch Reviews](resolving-disagreement.md#problems). ---- I think is a pragmatic approach that addresses some of Jan's concerns Best Regards Lars _______________________________________________ win-pv-devel mailing list win-pv-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/win-pv-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |