[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [win-pv-devel] v9.0.0 released
Can someone post a log of the qemu output (with xen_platform_log in the events file) so we can see what the PV drivers are doing? I generally do most of my testing against the latest Xen (i.e. 4.13). 4.8 should be fine though; the main differences from a Windoows PoV would be in the viridian enlightenment code, but that's orthogonal to the PV driver interfaces. I've trimmed out the cruft from the config I normally used and attached it. (I also normally boot Xen with a grant frame limit of 128, i.e. 4x the default). Paul > -----Original Message----- > From: win-pv-devel <win-pv-devel-bounces@xxxxxxxxxxxxxxxxxxxx> On Behalf > Of Steffan Cline > Sent: 10 December 2019 21:42 > To: win-pv-devel@xxxxxxxxxxxxxxxxxxxx > Subject: Re: [win-pv-devel] v9.0.0 released > > Håkon, this is what prompted me to ask everyone what cfg is being used > with these new drivers in case it's a conflict caused by a flag/option I'm > using. > > Paul, since these work for you, can you please share what you're using to > ensure we're not using something in conflict? > > On another note, is there a specific xen version we should be using? > > # rpm -qa | grep xen > xen-libs-4.8.5.75.g4c666a7e15-1.el7.x86_64 > xen-ovmf-20160905-1.gitbc54e50e0.el7.x86_64 > xen-hypervisor-4.8.5.75.g4c666a7e15-1.el7.x86_64 > centos-release-xen-common-8-7.el7.centos.x86_64 > xen-licenses-4.8.5.75.g4c666a7e15-1.el7.x86_64 > xen-runtime-4.8.5.75.g4c666a7e15-1.el7.x86_64 > centos-release-xen-8-7.el7.centos.x86_64 > xen-4.8.5.75.g4c666a7e15-1.el7.x86_64 > > > Thank you, > Steffan Cline > steffan@xxxxxxxxx > 602-793-0014 > > > On 12/10/19, 2:12 PM, "win-pv-devel on behalf of Håkon Alstadheim" <win- > pv-devel-bounces@xxxxxxxxxxxxxxxxxxxx on behalf of > hakon@xxxxxxxxxxxxxxxxxx> wrote: > > > Den 09.12.2019 22:20, skrev Steffan Cline: > > Does anyone have a specific config file they'd like to share that > performs well with these newest drivers? > > > > On my Win 2016 Server, I removed the 8.2 drivers, rebooted, > installed these and rebooted. It's been loading for about 30 minutes with > the spinning dots non-stop. > > > Same here. Restored disk image from backup and tried again, and got > same > second time. Left it for a day, still spinning. After destroying it, > at > some point I got "Can not access boot device" in the middle of that > pale blue screen. Trying to roll back using recovery point fails. > (That > is the extent of the error message, just restore failed) . It /does/ > show me the possible points I can revert to though, so it looks like > it > is working until it doesen't. For the record I also uninstalled old > drivers first. First time around I also removed the Spice-thingy, > leaving only Qemu. Second time around I left both the Qemu and Spice > stuff in. > > Going back to that image is rather painful, as the disk image takes > forever to copy to a new partition, and the backup I have is several > windows-updates old, and insist on running a backup first thing when > it > gets moving :-/ . > > Did a chkdsk from the installation-iso (which boots nicely with the > same > config, except for "boot='dc'"). Found some minor nits w\chkdsk. Am > now > trying to boot into safemode minimal. Not even a spinner showing, > "Times" column in the "xl list" display increases by about 0.4 every > second, so it is doing /something/ ... > > > > _______________________________________________ > win-pv-devel mailing list > win-pv-devel@xxxxxxxxxxxxxxxxxxxx > https://lists.xenproject.org/mailman/listinfo/win-pv-devel > > > > _______________________________________________ > win-pv-devel mailing list > win-pv-devel@xxxxxxxxxxxxxxxxxxxx > https://lists.xenproject.org/mailman/listinfo/win-pv-devel Attachment:
win10-1809-1.cfg _______________________________________________ win-pv-devel mailing list win-pv-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/win-pv-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |