Reserving virtual address space above 0xff000000
Linux version 2.6.32.12-0.7.1.xs1.0.0.311.170586xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Tue Feb 1 17:10:20 EST 2011
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  NSC Geode by NSC
  Cyrix CyrixInstead
  Centaur CentaurHauls
  Transmeta GenuineTMx86
  Transmeta TransmetaCPU
Xen-provided machine memory map:
 BIOS: 0000000000000000 - 000000000009f400 (usable)
 BIOS: 000000000009f400 - 00000000000a0000 (reserved)
 BIOS: 00000000000e4c00 - 0000000000100000 (reserved)
 BIOS: 0000000000100000 - 00000000bf780000 (usable)
 BIOS: 00000000bf780000 - 00000000bf798000 (ACPI data)
 BIOS: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS)
 BIOS: 00000000bf7dc000 - 00000000c0000000 (reserved)
 BIOS: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS: 00000000ffe00000 - 0000000100000000 (reserved)
 BIOS: 0000000100000000 - 0000000340000000 (usable)
Xen-provided physical RAM map:
 Xen: 0000000000000000 - 000000002f800000 (usable)
DMI 2.5 present.
last_pfn = 0x2f800 max_arch_pfn = 0x10000000
initial memory mapped : 0 - 00000000
init_memory_mapping: 0000000000000000-000000002f800000
NX (Execute Disable) protection: active
 0000000000 - 002f800000 page 4k
kernel direct mapping tables up to 2f800000 @ d76000-ef7000
RAMDISK: 005d9000 - 00ca8200
ACPI: RSDP 000fb150 00014 (v00 ACPIAM)
ACPI: RSDT bf780000 0003C (v01 092110 RSDT1001 20100921 MSFT 00000097)
ACPI: FACP bf780200 00084 (v01 092110 FACP1001 20100921 MSFT 00000097)
ACPI: DSDT bf7804b0 0C387 (v01  A1279 A1279001 00000001 INTL 20060113)
ACPI: FACS bf798000 00040
ACPI: APIC bf780390 000D8 (v01 092110 APIC1001 20100921 MSFT 00000097)
ACPI: MCFG bf780470 0003C (v01 092110 OEMMCFG  20100921 MSFT 00000097)
ACPI: OEMB bf798040 00072 (v01 092110 OEMB1001 20100921 MSFT 00000097)
ACPI: HPET bf78f4b0 00038 (v01 092110 OEMHPET  20100921 MSFT 00000097)
ACPI: OSFR bf78f4f0 000B0 (v01 092110 OEMOSFR  20100921 MSFT 00000097)
0MB HIGHMEM available.
760MB LOWMEM available.
  mapped low ram: 0 - 2f800000
  low ram: 0 - 2f800000
  node 0 low ram: 00000000 - 2f000000
  node 0 bootmap 00000000 - 00005e00
(5 early reservations) ==> bootmem [0000000000 - 002f000000]
  #0 [0000100000 - 00005b8054]    TEXT DATA BSS ==> [0000100000 - 00005b8054]
  #1 [00005d9000 - 0000d76000]     Xen provided ==> [00005d9000 - 0000d76000]
  #2 [00005b9000 - 00005b9228]              BRK ==> [00005b9000 - 00005b9228]
  #3 [0000d76000 - 0000eec000]          PGTABLE ==> [0000d76000 - 0000eec000]
  #4 [0000000000 - 0000006000]          BOOTMAP ==> [0000000000 - 0000006000]
found SMP MP-table at [feffa780] 000ff780
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x0002f800
  HighMem  0x0002f800 -> 0x0002f800
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0002f000
    0: 0x0002f800 -> 0x0002f800
On node 0 totalpages: 192512
free_area_init_node: node 0, pgdat c04dfe00, node_mem_map c1002000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 1488 pages used for memmap
  Normal zone: 186928 pages, LIFO batch:31
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 9 pages/cpu @c16b9000 s13208 r0 d23656 u65536
pcpu-alloc: s13208 r0 d23656 u65536 alloc=16*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
Swapping MFNs for PFN 534 and 16bb (MFN bd534 and 3366bb)
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 190992
Kernel command line: root=LABEL=root-jiijmxds ro xencons=hvc console=hvc0 console=tty0 quiet vga=785 splash 
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Software IO TLB enabled: 
 Aperture:     64 megabytes
 Address size: 28 bits
 Kernel range: c17f2000 - c57f2000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Initializing HighMem for node 0 (00000000:00000000)
Memory: 682428k/778240k available (2558k kernel code, 87292k reserved, 1438k data, 312k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfec77000 - 0xfefff000   (3616 kB)
    pkmap   : 0xfe800000 - 0xfea00000   (2048 kB)
    vmalloc : 0xf0000000 - 0xfe7fe000   ( 231 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
      .init : 0xc04e8000 - 0xc0536000   ( 312 kB)
      .data : 0xc037f96c - 0xc04e7178   (1438 kB)
      .text : 0xc0100000 - 0xc037f96c   (2558 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:2048
Xen reported: 2672.728 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [hvc0] enabled
Calibrating delay using timer specific routine.. 5346.42 BogoMIPS (lpj=26732108)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Mount-cache hash table entries: 512
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
SMP alternatives: switching to SMP code
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Brought up 8 CPUs
Initializing CPU#7
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:00.0: PME# disabled
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xc800-0xc81f]
pci 0000:00:1a.1: reg 20 io port: [0xc880-0xc89f]
pci 0000:00:1a.2: reg 20 io port: [0xcc00-0xcc1f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xf7fff000-0xf7fff3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xc080-0xc09f]
pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f]
pci 0000:00:1d.2: reg 20 io port: [0xc480-0xc49f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7ffe000-0xf7ffe3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 001f)
pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa48f]
pci 0000:00:1f.2: reg 24 io port: [0xa400-0xa40f]
pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7ffd000-0xf7ffd0ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xc000-0xc007]
pci 0000:00:1f.5: reg 14 io port: [0xbc00-0xbc03]
pci 0000:00:1f.5: reg 18 io port: [0xb880-0xb887]
pci 0000:00:1f.5: reg 1c io port: [0xb800-0xb803]
pci 0000:00:1f.5: reg 20 io port: [0xb480-0xb48f]
pci 0000:00:1f.5: reg 24 io port: [0xb400-0xb40f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10 32bit mmio: [0xf9000000-0xf9ffffff]
pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf8ffffff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfaee0000-0xfaefffff]
pci 0000:00:03.0: PCI bridge to [bus 02-02]
pci 0000:00:03.0: bridge 32bit mmio: [0xf8000000-0xfaefffff]
pci 0000:00:03.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:07.0: PCI bridge to [bus 03-03]
pci 0000:00:1c.0: PCI bridge to [bus 05-05]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff]
pci 0000:04:00.0: reg 10 io port: [0xd800-0xd8ff]
pci 0000:04:00.0: reg 18 64bit mmio: [0xfafff000-0xfaffffff]
pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf6ef0000-0xf6efffff]
pci 0000:04:00.0: reg 30 32bit mmio pref: [0xfafc0000-0xfafdffff]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.2: bridge 32bit mmio: [0xfaf00000-0xfaffffff]
pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf6e00000-0xf6efffff]
pci 0000:06:00.0: reg 10 io port: [0xec00-0xec0f]
pci 0000:06:00.0: reg 14 32bit mmio: [0xfbeffc00-0xfbeffc0f]
pci 0000:06:00.0: reg 18 32bit mmio: [0xfb000000-0xfb7fffff]
pci 0000:06:00.0: reg 30 32bit mmio pref: [0xfbee0000-0xfbeeffff]
pci 0000:06:00.0: supports D1
pci 0000:06:01.0: reg 10 32bit mmio: [0xfbec0000-0xfbedffff]
pci 0000:06:01.0: reg 14 32bit mmio: [0xfbea0000-0xfbebffff]
pci 0000:06:01.0: reg 18 io port: [0xe880-0xe8bf]
pci 0000:06:01.0: reg 30 32bit mmio pref: [0xfbe80000-0xfbe9ffff]
pci 0000:06:01.0: PME# supported from D0 D3hot D3cold
pci 0000:06:01.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xfb000000-0xfbefffff]
pci 0000:00:1e.0:   bridge window [0x00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [0x000000-0xffffffffffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
xen_mem: Initialising balloon driver.
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
Switching to clocksource xen
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved
system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved
system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved
system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved
system 00:01: iomem range 0xfec8a000-0xfec8afff has been reserved
system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved
system 00:06: ioport range 0x290-0x29f has been reserved
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x87f has been reserved
system 00:07: ioport range 0x500-0x57f could not be reserved
system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0a: iomem range 0xffc00000-0xffdfffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0d: iomem range 0x0-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:06:00.0: BAR 6: address space collision on of device [0xfbee0000-0xfbeeffff]
pci 0000:06:01.0: BAR 6: address space collision on of device [0xfbe80000-0xfbe9ffff]
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: disabled
pci 0000:00:01.0:   PREFETCH window: disabled
pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
pci 0000:00:03.0:   IO window: disabled
pci 0000:00:03.0:   MEM window: 0xf8000000-0xfaefffff
pci 0000:00:03.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
pci 0000:00:07.0:   IO window: disabled
pci 0000:00:07.0:   MEM window: disabled
pci 0000:00:07.0:   PREFETCH window: disabled
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1c.0:   IO window: 0x1000-0x1fff
pci 0000:00:1c.0:   MEM window: 0xc0000000-0xc03fffff
pci 0000:00:1c.0:   PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.2:   IO window: 0xd000-0xdfff
pci 0000:00:1c.2:   MEM window: 0xfaf00000-0xfaffffff
pci 0000:00:1c.2:   PREFETCH window: 0x000000f6e00000-0x000000f6efffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0:   IO window: 0xe000-0xefff
pci 0000:00:1e.0:   MEM window: 0xfb000000-0xfbefffff
pci 0000:00:1e.0:   PREFETCH window: 0xc0400000-0xc04fffff
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:07.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0106 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfaefffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
pci_bus 0000:05: resource 0 io:  [0x1000-0x1fff]
pci_bus 0000:05: resource 1 mem: [0xc0000000-0xc03fffff]
pci_bus 0000:05: resource 2 pref mem [0xf6f00000-0xf6ffffff]
pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
pci_bus 0000:04: resource 1 mem: [0xfaf00000-0xfaffffff]
pci_bus 0000:04: resource 2 pref mem [0xf6e00000-0xf6efffff]
pci_bus 0000:06: resource 0 io:  [0xe000-0xefff]
pci_bus 0000:06: resource 1 mem: [0xfb000000-0xfbefffff]
pci_bus 0000:06: resource 2 pref mem [0xc0400000-0xc04fffff]
pci_bus 0000:06: resource 4 io:  [0x00-0xffff]
pci_bus 0000:06: resource 5 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6972k freed
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 379
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xd0000000, mapped to 0xf0080000, using 1200k, total 262144k
vesafb: mode is 640x480x16, linelength=1280, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
floppy0: Unable to grab DMA2 for the floppy driver
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Xen virtual console successfully installed as hvc0
Event-channel device installed.
blktap_device_init: blktap device major 253
blktap_ring_init: blktap ring major: 254
netfront: Initialising virtual ethernet driver.
Uniform Multi-Platform E-IDE driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 17
registered taskstats version 1
PCI IO multiplexer device installed.
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 312k freed
Console: switching to colour frame buffer device 80x30
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fff000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7ffe000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000cc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
SCSI subsystem initialized
3ware Storage Controller device driver for Linux v1.26.02.002.
3w-xxxx 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
scsi0 : 3ware Storage Controller
3w-xxxx: scsi0: Found a 3ware Storage Controller at 0xec00, IRQ: 16.
scsi 0:0:0:0: Direct-Access     3ware    Logical Disk 0   1.2  PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 976771120 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: disabled, supports DPO and FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ide-gd driver 1.18
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 15 seconds
EXT3-fs: mounted filesystem with writeback data mode.
input: PC Speaker as /class/input/input0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 20
ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 20
ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 20
ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 20
Intel(R) PRO/1000 Network Driver - version 8.0.19-NAPI
Copyright (c) 1999-2009 Intel Corporation.
e1000 0000:06:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
input: Power Button as /class/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
e1000: 0000:06:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:b9:52:aa
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
No available Cx info for cpu 2
No available Cx info for cpu 3
No available Cx info for cpu 4
No available Cx info for cpu 5
No available Cx info for cpu 6
No available Cx info for cpu 7
No available Cx info for cpu 8
No available Cx info for cpu 9
No available Cx info for cpu 10
No available Cx info for cpu 11
No available Cx info for cpu 12
No available Cx info for cpu 13
No available Cx info for cpu 14
No available Cx info for cpu 15
No available Cx info for cpu 16
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:04:00.0: setting latency timer to 64
r8169 0000:04:00.0: irq 1279 (255) for MSI/MSI-X
eth0: RTL8168c/8111c at 0xf0612000, 90:e6:ba:82:b4:08, XID 1c4000c0 IRQ 1279
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
sd 0:0:0:0: Attached scsi generic sg0 type 0
Non-volatile memory driver v1.3
lp: driver loaded but no devices found
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on sda1, internal journal
Adding 524280k swap on /var/swap/swap.001.  Priority:-1 extents:140 across:4056904k 
