|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-API] Bug#680588: xcp-xapi: startup race condition between xcp-xapi and xcp-networkd on slave
Package: xcp-xapi
Version: 1.3.2-8
Severity: important
Tags: patch
Found race condition (specific only to slave hosts):
xcp-xapi can start earlier than xcp-networkd due lack of dependency in init.d
script.
Syptoms:
After reboot slave's xcp does not work:
xe (anything):
The host failed to acquire an IP address on its management interface and
therefore cannot contact the master.
log:
/var/log/xcp-xapi.log:[20120707T01:36:51.361Z| warn|lab-xh3|0
thread_zero|bringing up management interface D:065e1b39b653|xapi] Failed to
acquire a management IP address
That bug appears only on slave host.
Patch:
--- /tmp/xcp-xapi 2012-07-07 06:13:47.000000000 +0400
+++ /etc/init.d/xcp-xapi 2012-07-07 06:08:05.000000000 +0400
@@ -1,7 +1,7 @@
#! /bin/sh
### BEGIN INIT INFO
# Provides: xcp-xapi
-# Required-Start: $remote_fs $syslog xcp-squeezed xcp-v6d xcp-fe
+# Required-Start: $remote_fs $syslog xcp-squeezed xcp-v6d xcp-fe
xcp-networkd
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
(after applying exec 'update-rc.d xcp-xapi defaults')
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-3-686-pae (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xcp-xapi depends on:
ii hwdata 0.233-1
ii libc6 2.13-34
ii libpam0g 1.1.3-7.1
ii libuuid1 2.20.1-5.1
ii libvhd0 2.0.90-1
ii libxen-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii libxenstore3.0 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii lsb-base 4.1+Debian7
ii pciutils 1:3.1.9-5
ii python 2.7.3-1
ii python-xenapi 1.3.2-8
ii stunnel4 [stunnel] 3:4.53-1
ii xcp-eliloader 0.1-4
ii xcp-fe 0.5.2-3+b1
ii xcp-networkd 1.3.2-8
ii xcp-squeezed 1.3.2-8
ii xcp-storage-managers 0.1.1-2
ii xcp-v6d 1.3.2-8
ii xcp-xe 1.3.2-8
ii xen-hypervisor-4.1-amd64 [xen-hypervi 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii xen-utils-4.1 4.1.3~rc1+hg-20120614.a9c0a89c08f2-4
ii zlib1g 1:1.2.7.dfsg-13
Versions of packages xcp-xapi recommends:
ii cifs-utils 2:5.5-1
ii xcp-guest-templates 0.1-3
ii xcp-vncterm 0.1-2
xcp-xapi suggests no packages.
-- Configuration Files:
/etc/init.d/xcp-xapi changed:
XAPI_INIT_COMPLETE_COOKIE=/var/run/xapi_init_complete.cookie
XAPI_STARTUP_COOKIE=/var/run/xapi_startup.cookie
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="The XenAPI server"
NAME=xapi
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS="-daemon -writereadyfile $XAPI_STARTUP_COOKIE -writeinitcomplete
$XAPI_INIT_COMPLETE_COOKIE -onsystemboot"
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
TEMPLATES_MD5_STAMP=/var/lib/xcp/templates.md5
[ -x "$DAEMON" ] || exit 0
grep hypervisor /proc/cpuinfo > /dev/null || exit 0
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
[ -r /etc/default/xen ] && . /etc/default/xen
. /lib/init/vars.sh
. /lib/lsb/init-functions
if [ "${TOOLSTACK}" != "xapi" ]; then
log_failure_msg "Xen toolstack is not set to xapi! Exiting."
exit 0
fi
if [ -f /var/run/xend.pid ]; then
log_failure_msg "/var/run/xend.pid exists; ${NAME} conflicts with xend"
exit 1
fi
wait_for_xapi() {
MAX_RETRIES=50
RETRY=0
while [ ${RETRY} -lt ${MAX_RETRIES} ]; do
if [ -e ${XAPI_STARTUP_COOKIE} ]; then
return 0
fi
sleep 1
RETRY=$(( ${RETRY} + 1 ))
done
return 1
}
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
modprobe xen-netback
modprobe xen-blkback
modprobe blktap
mkdir -p /var/run/xend/boot
mkdir -p /usr/share/xcp/packages/iso
export OCAMLRUNPARAM=b
rm -f $XAPI_STARTUP_COOKIE $XAPI_INIT_COMPLETE_COOKIE
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON
--test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
# Add code here, if necessary, that waits for the process to be ready
# to handle requests from services started subsequently which depend
# on this one. As a last resort, sleep for some time.
wait_for_xapi
# Do some standard setup, e.g. pif-scan, template creation (maybe)
. /etc/xcp/inventory
xe pif-scan host-uuid=${INSTALLATION_UUID}
# Check whether the md5 of the create-templates binary matches the one
# used previously. If not, recreate the templates.
if [ -e /usr/lib/xcp/lib/create_templates ]; then
if ! md5sum -c --status $TEMPLATES_MD5_STAMP ; then
/usr/lib/xcp/lib/regenerate-templates start
md5sum /usr/lib/xcp/lib/create_templates >
$TEMPLATES_MD5_STAMP
fi
fi
}
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile
$PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec
$DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
}
do_reload() {
#
# If the daemon can reload its configuration without
# restarting (for example, when it is sent a SIGHUP),
# then implement that here.
#
start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name
$NAME
return 0
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
;;
#reload|force-reload)
#
# If do_reload() is not implemented then leave this commented out
# and leave 'force-reload' as an alias for 'restart'.
#
#log_daemon_msg "Reloading $DESC" "$NAME"
#do_reload
#log_end_msg $?
#;;
restart|force-reload)
#
# If the "reload" option is implemented then remove the
# 'force-reload' alias
#
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
exit 3
;;
esac
:
/etc/xcp/pool.conf changed:
slave:31.186.98.97
-- no debconf information
_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |