[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-API] XCP 1.6 beta Ram restriction for pci passthrough to pv Ubuntu 12.04 template



On Wed, Oct 24, 2012 at 06:41:39PM +0200, Markus Rhonheimer wrote:
> Hi,
> 
> I use XCP 1.6.06 with a Ubuntu 12.04 64bit pv domU created with the template 
> through xencenter 6.1.
> I also used this command on xcp: xe vm-param-set 
> other-config:pci=0/0000:00:1f.2 uuid=d6eb559e-af70-6f8e-d10f-62fc9f73db89 
> which passes a "SATA controller: Intel Corporation 6 Series/C200 Series 
> Chipset Family SATA AHCI Controller (rev 05)" through to the domU. extlinux 
> boot configuration has the passthrough option.
> After booting the domU lspci shows the passed through device but none of the 
> attached HDDs are visible.
> This message can be seen within dmesg:
> 

<snip>

> 
> The domU has about 8GB of Ram and therefore this bug seems to apply:
> 
> http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1673
> 
> This report mentions a more detailed thread at:
> 
> http://www.gossamer-threads.com/lists/xen/devel/187533
> 
> These are further informations about the host:
> 
>

<snip>
 
> The kernel version of the Ubuntu domU is:
> 
> 3.2.0-32-generic
> 
> I would appreciate any help. 
> Thanks in advance
> 

Linux 3.2.0 does not support PCI passthru with >3G of RAM.
The issues is fixed in xen-pcifront driver in later kernel versions.

-- Pasi


_______________________________________________
Xen-api mailing list
Xen-api@xxxxxxxxxxxxx
http://lists.xen.org/cgi-bin/mailman/listinfo/xen-api


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.