Re: [XenARM] About Tegra2 Xen-ARM porting

[Krishna Pavan <post4pavan@xxxxxxxxx>]

Hi Xen-ARM,
[ The following is my understanding, Corrections might be ]

Linux 2.6.21 is the one that has been used for i.MX21ADS, first port of Xen-ARM on a board with ARMv5 architecture, part of ARM9E family.

You can go with a different kernel I would say.
make arch=ARM.....etc should get you 2.6.38 kernel done with ARM.

[ Porting ] I am not sure how to do it as the python scripts for that used for i.MX21 ADS port are different and wonder, if any is present for integration WRT Tegra2/ any other.

The scripts are also responsible for getting the libraries that are required for xm and xend tools, which actually are needed to run Hypervisor.

After ARM9 series, I could only see work for Cortex-A9 [ Cortex-A15 & Cortex-A8 are work in Progress ], because of the issues with the VT, Virtualization Extensions Compatibility and so on.....

A particular guide to the TO_DATE boards porting is not available, except that available for i.MX21ADS.

_______________________________________________
Xen-arm mailing list
Xen-arm@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/mailman/listinfo/xen-arm