|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-bugs] [Bug 168] kernel BUG at arch/xen/i386/kernel/pci-dma.c:30 (iommu_bug)!
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=168 ------- Additional Comments From dbarrera@xxxxxxxxxx 2005-08-19 16:10 ------- This is the entire boot log: Note: I will try the debug patch later on. __ __ _____ ___ _ _ \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 3.0-devel (root@) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) Fri Aug 19 09:43:59 CDT 2005 Latest ChangeSet: Fri Aug 19 09:10:24 2005 3c1cd2486b7fecd5d97378a7d52e5bfb8eb7c718 (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009b400 (usable) (XEN) 000000000009b400 - 00000000000a0000 (reserved) (XEN) 00000000000d6000 - 00000000000d8000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000001ff70000 (usable) (XEN) 000000001ff70000 - 000000001ff76000 (ACPI data) (XEN) 000000001ff76000 - 000000001ff80000 (ACPI NVS) (XEN) 000000001ff80000 - 0000000020000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 00000000ffc00000 (reserved) (XEN) 00000000fffffc00 - 0000000100000000 (reserved) (XEN) System RAM: 511MB (523308kB) (XEN) Xen heap: 10MB (10648kB) (XEN) PAE enabled, limit: 16 GB (XEN) found SMP MP-table at 000f6140 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f6170 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x1ff7070d (XEN) ACPI: FADT (v001 INTEL CANTWOOD 0x06040000 PTL 0x00000003) @ 0x1ff75e1e (XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x1ff75e92 (XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x1ff75f06 (XEN) ACPI: ASF! (v032 IBM CETP 0x06040000 PTL 0x00000001) @ 0x1ff75f2e (XEN) ACPI: SSDT (v001 PTLTD ACPIHT 0x06040000 LTP 0x00000001) @ 0x1ff75fc9 (XEN) ACPI: DSDT (v001 INTEL CANTWOOD 0x06040000 MSFT 0x0100000c) @ 0x00000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:3 APIC version 20 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 15:3 APIC version 20 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Initializing CPU#0 (XEN) Detected 2800.577 MHz processor. (XEN) Using scheduler: Simple EDF Scheduler (sedf) (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 (XEN) Booting processor 1/1 eip 90000 (XEN) Initializing CPU#1 (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K (XEN) CPU: L2 cache: 1024K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 (XEN) checking TSC synchronization across 2 CPUs: passed. (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 2 CPUs (XEN) mtrr: v2.0 (20020519) (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000001800000->0000000002000000 (61952 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c061e9a4 (XEN) Init. ramdisk: c061f000->c06b1200 (XEN) Phys-Mach map: c06b2000->c06f0800 (XEN) Page tables: c06f1000->c06fa000 (XEN) Start info: c06fa000->c06fb000 (XEN) Boot stack: c06fb000->c06fc000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) Initrd len 0x92200, start at 0xc061f000 (XEN) Scrubbing Free RAM: ......done. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). Linux version 2.6.12-xen0 (root@lamb5) (gcc version 3.4.3 20041212 (Red Hat 3.4.3-9.EL4)) #1 Fri Aug 19 09:55:29 CDT 2005 BIOS-provided physical RAM map: Xen: 0000000000100000 - 000000000fa00000 (usable) 0MB HIGHMEM available. 250MB LOWMEM available. found SMP MP-table at 000f6140 DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec10000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec10000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 2 I/O APICs Using ACPI (MADT) for SMP configuration information IRQ lockup detection disabled Allocating PCI resources starting at 0fa00000 (gap: 0fa00000:f0600000) Built 1 zonelists Kernel command line: root=/dev/sda2 ro console=tty0,ttyS0 Initializing CPU#0 PID hash table entries: 1024 (order: 10, 16384 bytes) Xen reported: 2800.576 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) vmalloc area: d0800000-f53fe000, maxmem 2d800000 Memory: 246016k/256000k available (3557k kernel code, 8856k reserved, 1041k data, 352k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... disabled ENABLING IO-APIC IRQs checking if image is initramfs... it is Freeing initrd memory: 584k freed NET: Registered protocol family 16 PCI: Using configuration type 1 ACPI: Subsystem revision 20050309 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs *3 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *7 xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Grant table initialized IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> Simple Boot Flag at 0x38 set to 0x1 Initializing Cryptographic API serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.6) Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 18 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 22 (level, low) -> IRQ 22 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> Xen virtual console successfully installed as ttyS0 Event-channel device installed. Blkif backend is using grant tables. Initialising Xen netif backend #### netback tx using grant tables #### netback rx using grant tables Blkif frontend is using grant tables. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1468-0x146f, BIOS settings: hdc:pio, hdd:pio hda: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 27 (level, low) -> IRQ 27 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 1.3.11 <Adaptec AIC7901 Ultra320 SCSI adapter> aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 50-66Mhz, 512 SCBs (scsi0:A:0): 320.000MB/s transfers (160.000MHz DT|IU|RTI, 16bit) Vendor: IBM-ESXS Model: MAP3367NP FN Rev: C101 Type: Direct-Access ANSI SCSI revision: 03 scsi0:A:0:0: Tagged Queuing enabled. Depth 32 Red Hat/Adaptec aacraid driver (1.1.2-lk2 Aug 19 2005) 3ware Storage Controller device driver for Linux v1.26.02.001. SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sda: drive cache: write through SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sda4 < sda5 sda6 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Fusion MPT base driver 3.01.20 Copyright (c) 1999-2004 LSI Logic Corporation Fusion MPT SCSI Host driver 3.01.20 usbmon: debugs is not available USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001400 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001420 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: raid0 personality registered as nr 2 md: raid1 personality registered as nr 3 md: raid5 personality registered as nr 4 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 1294.000 MB/sec raid5: using function: pIII_sse (1294.000 MB/sec) md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 1 NET: Registered protocol family 17 logips2pp: Detected unknown logitech mouse model 1 input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1 Bridge firewalling registered Freeing unused kernel memory: 352k freed EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. store_evtchn = 16 XENBUS xs_read_watch: 0 Red Hat Enterprise Linux AS release 4 (Nahant) Kernel 2.6.12-xen0 on an i686 lamb5 login: (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) (XEN) DOM0: (file=mm.c, line=1055) Bad L1 flags 80000000 (XEN) Red Hat Enterprise Linux AS release 4 (Nahant) Kernel 2.6.12-xen0 on an i686 lamb5 login: -- Configure bugmail: http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ Xen-bugs mailing list Xen-bugs@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-bugs
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |