|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-bugs] [Bug 807] New: Error: Device 0 not connected
http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=807 Summary: Error: Device 0 not connected Product: Xen Version: unstable Platform: x86-64 OS/Version: Linux-2.6 Status: NEW Severity: normal Priority: P2 Component: Hypervisor AssignedTo: xen-bugs@xxxxxxxxxxxxxxxxxxx ReportedBy: hskupin@xxxxxxxxx I'm running Xen 3.0-unstable-1-amd64 under Debian Etch for a week now. I'm using network routing with an own vif-bridge to get a private network. After a couple of minutes or hours all domU cannot be reached from outside. When running 'xm list' afterwards I get the message: "Error: Device 0 not connected". Actually I cannot figure out how to reactivate dom0 and the network connections to have a running system without rebooting the whole machine. Opening the log file 'xend-debug.log' shows following entry: Traceback (most recent call last): File "SocketServer.py", line 463, in process_request_thread self.finish_request(request, client_address) File "SocketServer.py", line 254, in finish_request self.RequestHandlerClass(request, client_address, self) File "SocketServer.py", line 521, in __init__ self.handle() File "BaseHTTPServer.py", line 316, in handle self.handle_one_request() File "BaseHTTPServer.py", line 310, in handle_one_request method() File "/usr/lib/xen-3.0-unstable-1/lib/python/xen/util/xmlrpclib2.py", line 66, in do_POST self.send_response(200) File "BaseHTTPServer.py", line 367, in send_response self.wfile.write("%s %d %s\r\n" % File "socket.py", line 248, in write self.flush() File "socket.py", line 235, in flush self._sock.sendall(buffer) error: (32, 'Broken pipe') dmesg dom0: Bridge firewalling registered ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver device vif2.0 entered promiscuous mode audit(1162689220.872:2): dev=vif2.0 prom=256 old_prom=0 auid=4294967295 xenintbr: port 1(vif2.0) entering learning state eth0: no IPv6 routers present xenintbr: no IPv6 routers present device vif3.0 entered promiscuous mode audit(1162689227.948:3): dev=vif3.0 prom=256 old_prom=0 auid=4294967295 xenintbr: port 2(vif3.0) entering learning state xenintbr: topology change detected, propagating xenintbr: port 1(vif2.0) entering forwarding state xenintbr: topology change detected, propagating xenintbr: port 2(vif3.0) entering forwarding state device vif2.0 left promiscuous mode audit(1162704280.839:4): dev=vif2.0 prom=0 old_prom=256 auid=4294967295 xenintbr: port 1(vif2.0) entering disabled state xm dmesg: Xen version 3.0-unstable-1 (Debian 3.0-unstable+hg11561-1) (waldi@xxxxxxxxxx) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) Fri Sep 22 18:04:24 UTC 2006 Latest ChangeSet: Thu Sep 21 17:56:14 2006 +0100 (XEN) Command line: /xen-3.0-unstable-1-amd64.gz (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009f000 (usable) (XEN) 000000000009f000 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003fef0000 (usable) (XEN) 000000003fef0000 - 000000003fef3000 (ACPI NVS) (XEN) 000000003fef3000 - 000000003ff00000 (ACPI data) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) System RAM: 1022MB (1047100kB) (XEN) Xen heap: 14MB (14468kB) (XEN) found SMP MP-table at 000f4f10 (XEN) DMI 2.3 present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 VIAK8T ) @ 0x00000000000f8d70 (XEN) ACPI: RSDT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef3040 (XEN) ACPI: FADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef30c0 (XEN) ACPI: MADT (v001 VIAK8T AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000003fef8000 (XEN) ACPI: DSDT (v001 VIAK8T AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000 (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 15:7 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2199.826 MHz processor. (XEN) CPU0: AMD Flush Filter disabled (XEN) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) (XEN) CPU: L2 Cache: 1024K (64 bytes/line) (XEN) Intel machine check architecture supported. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 02 (XEN) Total of 1 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=0 pin2=0 (XEN) Platform timer is 1.193MHz PIT (XEN) Brought up 1 CPUs (XEN) Machine check exception polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Domain 0 kernel supports features = { 0000000f }. (XEN) Domain 0 kernel requires features = { 00000000 }. (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 000000003c000000->000000003e000000 (230590 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff80566e88 (XEN) Init. ramdisk: ffffffff80567000->ffffffff81575800 (XEN) Phys-Mach map: ffffffff81576000->ffffffff817485f0 (XEN) Start info: ffffffff81749000->ffffffff8174949c (XEN) Page tables: ffffffff8174a000->ffffffff81759000 (XEN) Boot stack: ffffffff81759000->ffffffff8175a000 (XEN) TOTAL: ffffffff80000000->ffffffff81800000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 1 VCPUs (XEN) Initrd len 0x100e800, start at 0xffffffff80567000 (XEN) Scrubbing Free RAM: ...........done. (XEN) Xen trace buffers: disabled (XEN) Xen is relinquishing VGA console. (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). xm info: host : hskupin.info release : 2.6.17-2-xen-amd64 version : #1 SMP Wed Sep 13 18:35:45 CEST 2006 machine : x86_64 nr_cpus : 1 nr_nodes : 1 sockets_per_node : 1 cores_per_socket : 1 threads_per_core : 1 cpu_mhz : 2199 hw_caps : 078bfbff:e3d3fbff:00000000:00000010:00000001:00000001:00000001 total_memory : 1022 free_memory : 0 xen_major : 3 xen_minor : 0 xen_extra : -unstable-1 xen_caps : xen-3.0-x86_64 xen_pagesize : 4096 platform_params : virt_start=0xffff800000000000 xen_changeset : Thu Sep 21 17:56:14 2006 +0100 cc_compiler : gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13) cc_compile_by : waldi cc_compile_domain : debian.org cc_compile_date : Fri Sep 22 18:04:24 UTC 2006 xend_config_format : 2 dmesg dom1: device vif2.0 entered promiscuous mode audit(1162689220.872:2): dev=vif2.0 prom=256 old_prom=0 auid=4294967295 xenintbr: port 1(vif2.0) entering learning state eth0: no IPv6 routers present xenintbr: no IPv6 routers present device vif3.0 entered promiscuous mode audit(1162689227.948:3): dev=vif3.0 prom=256 old_prom=0 auid=4294967295 xenintbr: port 2(vif3.0) entering learning state xenintbr: topology change detected, propagating xenintbr: port 1(vif2.0) entering forwarding state xenintbr: topology change detected, propagating xenintbr: port 2(vif3.0) entering forwarding state device vif2.0 left promiscuous mode audit(1162704280.839:4): dev=vif2.0 prom=0 old_prom=256 auid=4294967295 xenintbr: port 1(vif2.0) entering disabled state -- Configure bugmail: http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee. _______________________________________________ Xen-bugs mailing list Xen-bugs@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-bugs
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |