[Xen-bugs] [Bug 1058] Xen failing to boot under Debian Etch. (FATAL TRAP)

[bugzilla-daemon@xxxxxxxxxxxxxxxxxxx]

http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1058





------- Comment #6 from w3host@xxxxxxxxx  2007-11-03 04:01 -------
I have tried a lot of configurations. You are right there is an interaction
between Xen and the SOL interface.

There is no any booting problem if the IPMI interface is disconnected from the
console (even though the SOL redirection is enabled on the IPMI interface). So
the problem is independent from the SOL redirection.

If I wanted to see the booting outputs (of the XEN kernel using SOL) the server
was not able to boot.
If you connect to the console (dpcproxy -> console) after the XEN kernel
booting there is no any problem (you can see the normal kernel output as well).

Here is my settings:
(Motherboard: Intel S5000PSL)

GRUB:
serial --unit=0 --speed=19200 --word=8 --parity=no --stop=1
terminal --timeout=10 serial console

title           Xen 3.0.3-1-amd64 / Debian GNU/Linux, kernel 2.6.18-13etch4xen0
root            (hd0,0)
kernel          /xen-3.0.3-1-amd64.gz console=com2 com2=19200,8n1
module          /vmlinuz-2.6.18-13etch4xen0 root=/dev/sda5 ro console=tty0
console=ttyS1,19200n8 xencons=ttyS1
savedefault

BIOS:
Console Redirection: Serial Port B
Flow Control: RTS/CTS
Baud Rate: 19.2k
Terminal Type: VT100
Legacy OS Redirection: Disabled


-- 
Configure bugmail: 
http://bugzilla.xensource.com/bugzilla/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.

_______________________________________________
Xen-bugs mailing list
Xen-bugs@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-bugs