[Xen-changelog] Rationalise blkdev settings in frontend drivers.

[BitKeeper Bot <riel@xxxxxxxxxxx>]

ChangeSet 1.1811, 2005/03/30 10:59:54+01:00, kaf24@xxxxxxxxxxxxxxxxxxxx

        Rationalise blkdev settings in frontend drivers.
        Signed-off-by: Keir Fraser <keir@xxxxxxxxxxxxx>



 linux-2.4.29-xen-sparse/arch/xen/drivers/blkif/frontend/vbd.c |   15 ++---
 linux-2.6.11-xen-sparse/drivers/xen/blkfront/block.h          |    2 
 linux-2.6.11-xen-sparse/drivers/xen/blkfront/vbd.c            |   30 ++--------
 3 files changed, 13 insertions(+), 34 deletions(-)


diff -Nru a/linux-2.4.29-xen-sparse/arch/xen/drivers/blkif/frontend/vbd.c 
b/linux-2.4.29-xen-sparse/arch/xen/drivers/blkif/frontend/vbd.c
--- a/linux-2.4.29-xen-sparse/arch/xen/drivers/blkif/frontend/vbd.c     
2005-03-30 06:06:22 -05:00
+++ b/linux-2.4.29-xen-sparse/arch/xen/drivers/blkif/frontend/vbd.c     
2005-03-30 06:06:22 -05:00
@@ -169,14 +169,14 @@
             blksize_size[major]  = xlide_blksize_size;
             hardsect_size[major] = xlide_hardsect_size;
             max_sectors[major]   = xlide_max_sectors;
-            read_ahead[major]    = 8; /* from drivers/ide/ide-probe.c */
+            read_ahead[major]    = 8;
         } 
         else if ( is_scsi )
         { 
             blksize_size[major]  = xlscsi_blksize_size;
             hardsect_size[major] = xlscsi_hardsect_size;
             max_sectors[major]   = xlscsi_max_sectors;
-            read_ahead[major]    = 0; /* XXX 8; -- guessing */
+            read_ahead[major]    = 8;
         }
         else
         { 
@@ -529,20 +529,17 @@
     /* Initialize the global arrays. */
     for ( i = 0; i < 256; i++ ) 
     {
-        /* from the generic ide code (drivers/ide/ide-probe.c, etc) */
         xlide_blksize_size[i]  = 1024;
         xlide_hardsect_size[i] = 512;
-        xlide_max_sectors[i]   = 128;  /* 'hwif->rqsize' if we knew it */
+        xlide_max_sectors[i]   = 512;
 
-        /* from the generic scsi disk code (drivers/scsi/sd.c) */
-        xlscsi_blksize_size[i]  = 1024; /* XXX 512; */
+        xlscsi_blksize_size[i]  = 1024;
         xlscsi_hardsect_size[i] = 512;
-        xlscsi_max_sectors[i]   = 128*8; /* XXX 128; */
+        xlscsi_max_sectors[i]   = 512;
 
-        /* we don't really know what to set these too since it depends */
         xlvbd_blksize_size[i]  = 512;
         xlvbd_hardsect_size[i] = 512;
-        xlvbd_max_sectors[i]   = 128;
+        xlvbd_max_sectors[i]   = 512;
     }
 
     vbd_info = kmalloc(MAX_VBDS * sizeof(vdisk_t), GFP_KERNEL);
diff -Nru a/linux-2.6.11-xen-sparse/drivers/xen/blkfront/block.h 
b/linux-2.6.11-xen-sparse/drivers/xen/blkfront/block.h
--- a/linux-2.6.11-xen-sparse/drivers/xen/blkfront/block.h      2005-03-30 
06:06:22 -05:00
+++ b/linux-2.6.11-xen-sparse/drivers/xen/blkfront/block.h      2005-03-30 
06:06:22 -05:00
@@ -66,8 +66,6 @@
     int partn_shift;
     int partn_per_major;
     int devs_per_major;
-    int hardsect_size;
-    int max_sectors;
     char *devname;
     char *diskname;
 };
diff -Nru a/linux-2.6.11-xen-sparse/drivers/xen/blkfront/vbd.c 
b/linux-2.6.11-xen-sparse/drivers/xen/blkfront/vbd.c
--- a/linux-2.6.11-xen-sparse/drivers/xen/blkfront/vbd.c        2005-03-30 
06:06:22 -05:00
+++ b/linux-2.6.11-xen-sparse/drivers/xen/blkfront/vbd.c        2005-03-30 
06:06:22 -05:00
@@ -33,9 +33,9 @@
 #include <linux/blkdev.h>
 
 /*
- * For convenience we distinguish between ide, scsi and 'other' (i.e.
- * potentially combinations of the two) in the naming scheme and in a few 
- * other places (like default readahead, etc).
+ * For convenience we distinguish between ide, scsi and 'other' (i.e.,
+ * potentially combinations of the two) in the naming scheme and in a few other
+ * places.
  */
 
 #define NUM_IDE_MAJORS 10
@@ -45,10 +45,6 @@
 static struct xlbd_type_info xlbd_ide_type = {
     .partn_shift = 6,
     .partn_per_major = 2,
-    // XXXcl todo blksize_size[major]  = 1024;
-    .hardsect_size = 512,
-    .max_sectors = 128,  /* 'hwif->rqsize' if we knew it */
-    // XXXcl todo read_ahead[major]    = 8; /* from drivers/ide/ide-probe.c */
     .devname = "ide",
     .diskname = "hd",
 };
@@ -56,10 +52,6 @@
 static struct xlbd_type_info xlbd_scsi_type = {
     .partn_shift = 4,
     .partn_per_major = 16,
-    // XXXcl todo blksize_size[major]  = 1024; /* XXX 512; */
-    .hardsect_size = 512,
-    .max_sectors = 128*8, /* XXX 128; */
-    // XXXcl todo read_ahead[major]    = 0; /* XXX 8; -- guessing */
     .devname = "sd",
     .diskname = "sd",
 };
@@ -67,10 +59,6 @@
 static struct xlbd_type_info xlbd_vbd_type = {
     .partn_shift = 4,
     .partn_per_major = 16,
-    // XXXcl todo blksize_size[major]  = 512;
-    .hardsect_size = 512,
-    .max_sectors = 128,
-    // XXXcl todo read_ahead[major]    = 8;
     .devname = "xvd",
     .diskname = "xvd",
 };
@@ -245,17 +233,13 @@
         elevator_init(xlbd_blk_queue, "noop");
 
         /*
-         * Turn off barking 'headactive' mode. We dequeue
-         * buffer heads as soon as we pass them to back-end
-         * driver.
+         * Turn off barking 'headactive' mode. We dequeue buffer heads as soon 
+         * as we pass them to back-end driver.
          */
         blk_queue_headactive(xlbd_blk_queue, 0);
 
-        /* Hard sector size and max sectors impersonate the equiv. hardware. */
-        blk_queue_hardsect_size(
-            xlbd_blk_queue, mi->type->hardsect_size);
-        blk_queue_max_sectors(
-            xlbd_blk_queue, mi->type->max_sectors);
+        blk_queue_hardsect_size(xlbd_blk_queue, 512);
+        blk_queue_max_sectors(xlbd_blk_queue, 512);
 
         /* Each segment in a request is up to an aligned page in size. */
         blk_queue_segment_boundary(xlbd_blk_queue, PAGE_SIZE - 1);

_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog