|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] Add TARGET_ARCH suffix to defconfig files.
ChangeSet 1.1435, 2005/04/02 20:39:22+01:00, cl349@xxxxxxxxxxxxxxxxxxxx
Add TARGET_ARCH suffix to defconfig files.
Signed-off-by: Christian Limpach <Christian.Limpach@xxxxxxxxxxxx>
b/Config.mk | 7
b/buildconfigs/Rules.mk | 2
b/buildconfigs/mk.linux-2.6-xen0 | 2
b/buildconfigs/mk.linux-2.6-xenU | 2
b/linux-2.6.11-xen-sparse/arch/xen/configs/xen0_defconfig_x86_32 | 1099
++++++++++
b/linux-2.6.11-xen-sparse/arch/xen/configs/xenU_defconfig_x86_32 | 521 ++++
linux-2.6.11-xen-sparse/arch/xen/configs/xen0_defconfig | 1099
----------
linux-2.6.11-xen-sparse/arch/xen/configs/xenU_defconfig | 521 ----
8 files changed, 1631 insertions(+), 1622 deletions(-)
diff -Nru a/Config.mk b/Config.mk
--- a/Config.mk 2005-04-03 05:02:48 -04:00
+++ b/Config.mk 2005-04-03 05:02:48 -04:00
@@ -1,7 +1,14 @@
# -*- mode: Makefile; -*-
+
# Currently supported architectures: x86_32, x86_64
XEN_COMPILE_ARCH ?= $(shell uname -m | sed -e s/i.86/x86_32/)
XEN_TARGET_ARCH ?= $(XEN_COMPILE_ARCH)
+
+# Set ARCH/SUBARCH appropriately.
+override COMPILE_SUBARCH := $(XEN_COMPILE_ARCH)
+override TARGET_SUBARCH := $(XEN_TARGET_ARCH)
+override COMPILE_ARCH := $(patsubst x86%,x86,$(XEN_COMPILE_ARCH))
+override TARGET_ARCH := $(patsubst x86%,x86,$(XEN_TARGET_ARCH))
#
# Tool configuration Makefile fragment
diff -Nru a/buildconfigs/Rules.mk b/buildconfigs/Rules.mk
--- a/buildconfigs/Rules.mk 2005-04-03 05:02:48 -04:00
+++ b/buildconfigs/Rules.mk 2005-04-03 05:02:48 -04:00
@@ -1,4 +1,6 @@
+include Config.mk
+
# We expect these two to already be set if people
# are using the top-level Makefile
DISTDIR ?= $(CURDIR)/dist
diff -Nru a/buildconfigs/mk.linux-2.6-xen0 b/buildconfigs/mk.linux-2.6-xen0
--- a/buildconfigs/mk.linux-2.6-xen0 2005-04-03 05:02:48 -04:00
+++ b/buildconfigs/mk.linux-2.6-xen0 2005-04-03 05:02:48 -04:00
@@ -32,7 +32,7 @@
# Re-use config from install dir if one exits else use default config
[ -r $(DESTDIR)/boot/config-$(FULLVERSION) ] && \
cp $(DESTDIR)/boot/config-$(FULLVERSION) $(LINUX_DIR)/.config \
- || cp $(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig \
+ || cp
$(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig_$(TARGET_SUBARCH) \
$(LINUX_DIR)/.config
$(MAKE) -C $(LINUX_DIR) ARCH=xen oldconfig
diff -Nru a/buildconfigs/mk.linux-2.6-xenU b/buildconfigs/mk.linux-2.6-xenU
--- a/buildconfigs/mk.linux-2.6-xenU 2005-04-03 05:02:48 -04:00
+++ b/buildconfigs/mk.linux-2.6-xenU 2005-04-03 05:02:48 -04:00
@@ -32,7 +32,7 @@
# Re-use config from install dir if one exits else use default config
[ -r $(DESTDIR)/boot/config-$(FULLVERSION) ] && \
cp $(DESTDIR)/boot/config-$(FULLVERSION) $(LINUX_DIR)/.config \
- || cp $(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig \
+ || cp
$(LINUX_DIR)/arch/xen/configs/$(EXTRAVERSION)_defconfig_$(TARGET_SUBARCH) \
$(LINUX_DIR)/.config
$(MAKE) -C $(LINUX_DIR) ARCH=xen oldconfig
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/configs/xen0_defconfig
b/linux-2.6.11-xen-sparse/arch/xen/configs/xen0_defconfig
--- a/linux-2.6.11-xen-sparse/arch/xen/configs/xen0_defconfig 2005-04-03
05:02:48 -04:00
+++ /dev/null Wed Dec 31 16:00:00 196900
@@ -1,1099 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-xen0
-# Sat Mar 19 19:42:39 2005
-#
-CONFIG_XEN=y
-CONFIG_ARCH_XEN=y
-CONFIG_NO_IDLE_HZ=y
-
-#
-# XEN
-#
-CONFIG_XEN_PRIVILEGED_GUEST=y
-CONFIG_XEN_PHYSDEV_ACCESS=y
-CONFIG_XEN_BLKDEV_BACKEND=y
-# CONFIG_XEN_BLKDEV_TAP_BE is not set
-CONFIG_XEN_NETDEV_BACKEND=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_NETDEV_FRONTEND=y
-# CONFIG_XEN_NETDEV_FRONTEND_PIPELINED_TRANSMITTER is not set
-# CONFIG_XEN_BLKDEV_TAP is not set
-CONFIG_XEN_SCRUB_PAGES=y
-CONFIG_X86=y
-# CONFIG_X86_64 is not set
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# X86 Processor Configuration
-#
-CONFIG_XENARCH="i386"
-CONFIG_MMU=y
-CONFIG_UID16=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_IOMAP=y
-# CONFIG_M386 is not set
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-# CONFIG_M586TSC is not set
-# CONFIG_M586MMX is not set
-# CONFIG_M686 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-CONFIG_MPENTIUM4=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MWINCHIPC6 is not set
-# CONFIG_MWINCHIP2 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_X86_GENERIC is not set
-CONFIG_X86_CMPXCHG=y
-CONFIG_X86_XADD=y
-CONFIG_X86_L1_CACHE_SHIFT=7
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_X86_WP_WORKS_OK=y
-CONFIG_X86_INVLPG=y
-CONFIG_X86_BSWAP=y
-CONFIG_X86_POPAD_OK=y
-CONFIG_X86_GOOD_APIC=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-# CONFIG_HPET_TIMER is not set
-# CONFIG_HPET_EMULATE_RTC is not set
-# CONFIG_SMP is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_MICROCODE=y
-CONFIG_X86_CPUID=y
-
-#
-# Firmware Drivers
-#
-# CONFIG_EDD is not set
-CONFIG_NOHIGHMEM=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_MTRR=y
-CONFIG_HAVE_DEC_LOCK=y
-# CONFIG_REGPARM is not set
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-CONFIG_PCI=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-CONFIG_ISA=y
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-# CONFIG_SCx200 is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-CONFIG_PCMCIA_PROBE=y
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_4KSTACKS is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_X86_BIOS_REBOOT=y
-CONFIG_PC=y
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |