|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] reboot.c, init.c, hypervisor.h, evtchn.h, tlbflush.h, pgtable-2level.h:
ChangeSet 1.1159.256.107, 2005/04/28 16:08:57+01:00, cl349@xxxxxxxxxxxxxxxxxxxx
reboot.c, init.c, hypervisor.h, evtchn.h, tlbflush.h, pgtable-2level.h:
sync w/ unstable.
system.h:
Fix typo.
pgtable.h, fixup.c, irq.c, direct.c, timer_tsc.c, pci-dma.c, init.c,
fault.c:
Cleanup whitespace.
page.h:
Turn __pte and __pgd into #define's like the original definitions.
Add casts to unsigned long for phys_to_machine_mapping and
machine_to_phys_mapping.
fixmap.h, Makefile:
gnttab is not used in 2.0.
.del-gnttab.c~4461d10e936c37ab:
Delete: linux-2.6.11-xen-sparse/arch/xen/kernel/gnttab.c
.del-gnttab.h~974eaf5d22418ecd:
Delete: linux-2.6.11-xen-sparse/include/asm-xen/gnttab.h
setup.c:
Add panic notification handler.
Change phys_to_machine_mapping from unsigned long * to unsigned int *.
Whitespace cleanups.
page.h:
Change phys_to_machine_mapping from unsigned long * to unsigned int *.
process.c:
UTSNAME -> system_utsname.release as in plain Linux.
Disable preemption before reading smp_processor_id.
head.S:
sync w/ unstable for maintenance -- backport SMP-guest support bits.
Break __xen_guest definition up in several lines.
ldt.c, desc.h, common.c:
Move queue flush into load_LDT().
common.c:
g/c unused code.
Kconfig:
Fix whitespace for microcode option.
b/linux-2.6.11-xen-sparse/arch/xen/i386/Kconfig | 26 -
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/cpu/common.c | 14
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/head.S | 32 +
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/ldt.c | 5
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/pci-dma.c | 41 +-
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c | 5
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/setup.c | 38 +-
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/timers/timer_tsc.c | 4
b/linux-2.6.11-xen-sparse/arch/xen/i386/mm/fault.c | 8
b/linux-2.6.11-xen-sparse/arch/xen/i386/mm/init.c | 23 -
b/linux-2.6.11-xen-sparse/arch/xen/i386/pci/direct.c | 8
b/linux-2.6.11-xen-sparse/arch/xen/i386/pci/irq.c | 2
b/linux-2.6.11-xen-sparse/arch/xen/kernel/Makefile | 2
b/linux-2.6.11-xen-sparse/arch/xen/kernel/fixup.c | 3
b/linux-2.6.11-xen-sparse/arch/xen/kernel/reboot.c | 8
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/desc.h | 1
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/fixmap.h | 1
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/page.h | 20 -
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/pgtable-2level.h | 2
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/pgtable.h | 1
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/system.h | 2
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-i386/tlbflush.h | 5
b/linux-2.6.11-xen-sparse/include/asm-xen/evtchn.h | 3
b/linux-2.6.11-xen-sparse/include/asm-xen/hypervisor.h | 6
linux-2.6.11-xen-sparse/arch/xen/kernel/gnttab.c | 163
----------
linux-2.6.11-xen-sparse/include/asm-xen/gnttab.h | 35 --
26 files changed, 135 insertions(+), 323 deletions(-)
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/Kconfig
b/linux-2.6.11-xen-sparse/arch/xen/i386/Kconfig
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/Kconfig 2005-04-28 18:03:13
-04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/Kconfig 2005-04-28 18:03:13
-04:00
@@ -456,22 +456,22 @@
# enters thermal throttling.
config MICROCODE
- tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
+ tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
depends on XEN_PRIVILEGED_GUEST
- ---help---
- If you say Y here and also to "/dev file system support" in the
- 'File systems' section, you will be able to update the microcode on
- Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
- Pentium III, Pentium 4, Xeon etc. You will obviously need the
- actual microcode binary data itself which is not shipped with the
- Linux kernel.
+ ---help---
+ If you say Y here and also to "/dev file system support" in the
+ 'File systems' section, you will be able to update the microcode on
+ Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
+ Pentium III, Pentium 4, Xeon etc. You will obviously need the
+ actual microcode binary data itself which is not shipped with the
+ Linux kernel.
- For latest news and information on obtaining all the required
- ingredients for this driver, check:
- <http://www.urbanmyth.org/microcode/>.
+ For latest news and information on obtaining all the required
+ ingredients for this driver, check:
+ <http://www.urbanmyth.org/microcode/>.
- To compile this driver as a module, choose M here: the
- module will be called microcode.
+ To compile this driver as a module, choose M here: the
+ module will be called microcode.
#config X86_MSR
# tristate "/dev/cpu/*/msr - Model-specific register support"
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/cpu/common.c
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/cpu/common.c
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/cpu/common.c 2005-04-28
18:03:13 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/cpu/common.c 2005-04-28
18:03:13 -04:00
@@ -598,21 +598,10 @@
}
/*
- * Initialize the per-CPU GDT with the boot GDT,
- * and set up the GDT descriptor:
- */
- if (cpu) {
- cpu_gdt_descr[cpu].size = GDT_SIZE;
- cpu_gdt_descr[cpu].address = 0; /* XXXcl alloc page */
- BUG(); /* XXXcl SMP */
- memcpy((void *)cpu_gdt_descr[cpu].address,
- (void *)cpu_gdt_descr[0].address, GDT_SIZE);
- }
- /*
* Set up the per-thread TLS descriptor cache:
*/
memcpy(thread->tls_array, &get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN],
- GDT_ENTRY_TLS_ENTRIES * 8);
+ GDT_ENTRY_TLS_ENTRIES * 8);
cpu_gdt_init(&cpu_gdt_descr[cpu]);
@@ -633,7 +622,6 @@
load_esp0(t, thread);
load_LDT(&init_mm.context);
- flush_page_update_queue();
/* Clear %fs and %gs. */
asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/head.S
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/head.S
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/head.S 2005-04-28
18:03:13 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/head.S 2005-04-28
18:03:13 -04:00
@@ -2,7 +2,9 @@
#include <linux/config.h>
.section __xen_guest
- .ascii "GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=2.0,VIRT_BASE=0xC0000000"
+ .ascii "GUEST_OS=linux,GUEST_VER=2.6"
+ .ascii ",XEN_VER=2.0"
+ .ascii ",VIRT_BASE=0xC0000000"
.ascii ",LOADER=generic"
.ascii ",PT_MODE_WRITABLE"
.byte 0
@@ -31,14 +33,19 @@
ENTRY(startup_32)
cld
- /* Set up the stack pointer */
- lss stack_start,%esp
-
/* Copy the necessary stuff from xen_start_info structure. */
mov $xen_start_info_union,%edi
mov $128,%ecx
rep movsl
+#ifdef CONFIG_SMP
+ENTRY(startup_32_smp)
+ cld
+#endif /* CONFIG_SMP */
+
+ /* Set up the stack pointer */
+ lss stack_start,%esp
+
checkCPUtype:
/* get vendor info */
@@ -61,11 +68,22 @@
movb %cl,X86_MASK
movl %edx,X86_CAPABILITY
- xorl %eax,%eax # Clear FS/GS and LDT
+ incb ready
+
+ xorl %eax,%eax # Clear FS/GS and LDT
movl %eax,%fs
movl %eax,%gs
- cld # gcc2 wants the direction flag cleared at all times
+ cld # gcc2 wants the direction flag cleared at all
times
+#ifdef CONFIG_SMP
+ movb ready, %cl
+ cmpb $1,%cl
+ je 1f # the first CPU calls start_kernel
+ # all other CPUs call initialize_secondary
+ call initialize_secondary
+ jmp L6
+1:
+#endif /* CONFIG_SMP */
call start_kernel
L6:
jmp L6 # main should never return here, but
@@ -87,6 +105,8 @@
ENTRY(stack_start)
.long init_thread_union+THREAD_SIZE
.long __BOOT_DS
+
+ready: .byte 0
.globl idt_descr
.globl cpu_gdt_descr
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/ldt.c
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/ldt.c
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/ldt.c 2005-04-28
18:03:13 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/ldt.c 2005-04-28
18:03:13 -04:00
@@ -22,10 +22,8 @@
#ifdef CONFIG_SMP /* avoids "defined but not used" warnig */
static void flush_ldt(void *null)
{
- if (current->active_mm) {
+ if (current->active_mm)
load_LDT(¤t->active_mm->context);
- flush_page_update_queue();
- }
}
#endif
@@ -64,7 +62,6 @@
make_pages_readonly(pc->ldt, (pc->size * LDT_ENTRY_SIZE) /
PAGE_SIZE);
load_LDT(pc);
- flush_page_update_queue();
#ifdef CONFIG_SMP
mask = cpumask_of_cpu(smp_processor_id());
if (!cpus_equal(current->mm->cpu_vm_mask, mask))
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/pci-dma.c
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/pci-dma.c
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/pci-dma.c 2005-04-28
18:03:13 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/pci-dma.c 2005-04-28
18:03:13 -04:00
@@ -49,11 +49,11 @@
/* 1. Zap current PTEs, giving away the underlying pages. */
for (i = 0; i < (1<<order); i++) {
- pgd = pgd_offset_k( (vstart + (i*PAGE_SIZE)));
- pud = pud_offset(pgd, (vstart + (i*PAGE_SIZE)));
- pmd = pmd_offset(pud, (vstart + (i*PAGE_SIZE)));
- pte = pte_offset_kernel(pmd, (vstart + (i*PAGE_SIZE)));
- pfn = pte->pte_low >> PAGE_SHIFT;
+ pgd = pgd_offset_k(vstart + (i*PAGE_SIZE));
+ pud = pud_offset(pgd, vstart + (i*PAGE_SIZE));
+ pmd = pmd_offset(pud, vstart + (i*PAGE_SIZE));
+ pte = pte_offset_kernel(pmd, vstart + (i*PAGE_SIZE));
+ pfn = pte_val_ma(*pte) >> PAGE_SHIFT;
queue_l1_entry_update(pte, 0);
phys_to_machine_mapping[(__pa(vstart)>>PAGE_SHIFT)+i] =
INVALID_P2M_ENTRY;
@@ -66,21 +66,19 @@
&pfn, 1, order) != 1) BUG();
/* 3. Map the new extent in place of old pages. */
for (i = 0; i < (1<<order); i++) {
- pgd = pgd_offset_k( (vstart + (i*PAGE_SIZE)));
- pud = pud_offset(pgd, (vstart + (i*PAGE_SIZE)));
- pmd = pmd_offset(pud, (vstart + (i*PAGE_SIZE)));
- pte = pte_offset_kernel(pmd, (vstart + (i*PAGE_SIZE)));
- queue_l1_entry_update(
- pte, ((pfn+i)<<PAGE_SHIFT)|__PAGE_KERNEL);
- queue_machphys_update(
- pfn+i, (__pa(vstart)>>PAGE_SHIFT)+i);
- phys_to_machine_mapping[(__pa(vstart)>>PAGE_SHIFT)+i] =
- pfn+i;
+ pgd = pgd_offset_k(vstart + (i*PAGE_SIZE));
+ pud = pud_offset(pgd, vstart + (i*PAGE_SIZE));
+ pmd = pmd_offset(pud, vstart + (i*PAGE_SIZE));
+ pte = pte_offset_kernel(pmd, vstart + (i*PAGE_SIZE));
+ queue_l1_entry_update(pte,
+ ((pfn+i)<<PAGE_SHIFT)|__PAGE_KERNEL);
+ queue_machphys_update(pfn+i, (__pa(vstart)>>PAGE_SHIFT)+i);
+ phys_to_machine_mapping[(__pa(vstart)>>PAGE_SHIFT)+i] = pfn+i;
}
/* Flush updates through and flush the TLB. */
xen_tlb_flush();
- balloon_unlock(flags);
+ balloon_unlock(flags);
}
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,0)
@@ -125,14 +123,13 @@
vstart = __get_free_pages(gfp, order);
ret = (void *)vstart;
- if (ret == NULL)
- return ret;
-
- xen_contig_memory(vstart, order);
- memset(ret, 0, size);
- *dma_handle = virt_to_bus(ret);
+ if (ret != NULL) {
+ xen_contig_memory(vstart, order);
+ memset(ret, 0, size);
+ *dma_handle = virt_to_bus(ret);
+ }
return ret;
}
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c 2005-04-28
18:03:13 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c 2005-04-28
18:03:13 -04:00
@@ -94,10 +94,11 @@
extern int set_timeout_timer(void);
void xen_idle(void)
{
- int cpu = smp_processor_id();
+ int cpu;
local_irq_disable();
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |