|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] upgrade to 2.6.11.10
ChangeSet 1.1159.258.133, 2005/05/17 08:39:53+01:00, iap10@xxxxxxxxxxxxxxxxxxx
upgrade to 2.6.11.10
b/patches/linux-2.6.11/linux-2.6.11.10.patch | 1384 ++++++++++++++++++++++++++
patches/linux-2.6.11/linux-2.6.11.9.patch | 1422 ---------------------------
2 files changed, 1384 insertions(+), 1422 deletions(-)
diff -Nru a/patches/linux-2.6.11/linux-2.6.11.10.patch
b/patches/linux-2.6.11/linux-2.6.11.10.patch
--- /dev/null Wed Dec 31 16:00:00 196900
+++ b/patches/linux-2.6.11/linux-2.6.11.10.patch 2005-05-17 04:04:41
-04:00
@@ -0,0 +1,1737 @@
+diff -Naur linux-2.6.11/Documentation/SecurityBugs
linux-2.6.11.10/Documentation/SecurityBugs
+--- linux-2.6.11/Documentation/SecurityBugs 1969-12-31 16:00:00.000000000
-0800
++++ linux-2.6.11.10/Documentation/SecurityBugs 2005-05-16 10:50:30.000000000
-0700
+@@ -0,0 +1,38 @@
++Linux kernel developers take security very seriously. As such, we'd
++like to know when a security bug is found so that it can be fixed and
++disclosed as quickly as possible. Please report security bugs to the
++Linux kernel security team.
++
++1) Contact
++
++The Linux kernel security team can be contacted by email at
++<security@xxxxxxxxxx>. This is a private list of security officers
++who will help verify the bug report and develop and release a fix.
++It is possible that the security team will bring in extra help from
++area maintainers to understand and fix the security vulnerability.
++
++As it is with any bug, the more information provided the easier it
++will be to diagnose and fix. Please review the procedure outlined in
++REPORTING-BUGS if you are unclear about what information is helpful.
++Any exploit code is very helpful and will not be released without
++consent from the reporter unless it has already been made public.
++
++2) Disclosure
++
++The goal of the Linux kernel security team is to work with the
++bug submitter to bug resolution as well as disclosure. We prefer
++to fully disclose the bug as soon as possible. It is reasonable to
++delay disclosure when the bug or the fix is not yet fully understood,
++the solution is not well-tested or for vendor coordination. However, we
++expect these delays to be short, measurable in days, not weeks or months.
++A disclosure date is negotiated by the security team working with the
++bug submitter as well as vendors. However, the kernel security team
++holds the final say when setting a disclosure date. The timeframe for
++disclosure is from immediate (esp. if it's already publically known)
++to a few weeks. As a basic default policy, we expect report date to
++disclosure date to be on the order of 7 days.
++
++3) Non-disclosure agreements
++
++The Linux kernel security team is not a formal body and therefore unable
++to enter any non-disclosure agreements.
+diff -Naur linux-2.6.11/MAINTAINERS linux-2.6.11.10/MAINTAINERS
+--- linux-2.6.11/MAINTAINERS 2005-03-01 23:38:10.000000000 -0800
++++ linux-2.6.11.10/MAINTAINERS 2005-05-16 10:50:30.000000000 -0700
+@@ -1966,6 +1966,11 @@
+ W: http://www.weinigel.se
+ S: Supported
+
++SECURITY CONTACT
++P: Security Officers
++M: security@xxxxxxxxxx
++S: Supported
++
+ SELINUX SECURITY MODULE
+ P: Stephen Smalley
+ M: sds@xxxxxxxxxxxxxx
+diff -Naur linux-2.6.11/Makefile linux-2.6.11.10/Makefile
+--- linux-2.6.11/Makefile 2005-03-01 23:38:13.000000000 -0800
++++ linux-2.6.11.10/Makefile 2005-05-16 10:50:30.000000000 -0700
+@@ -1,8 +1,8 @@
+ VERSION = 2
+ PATCHLEVEL = 6
+ SUBLEVEL = 11
+-EXTRAVERSION =
+-NAME=Woozy Numbat
++EXTRAVERSION = .10
++NAME=Woozy Beaver
+
+ # *DOCUMENTATION*
+ # To see a list of typical targets execute "make help"
+diff -Naur linux-2.6.11/REPORTING-BUGS linux-2.6.11.10/REPORTING-BUGS
+--- linux-2.6.11/REPORTING-BUGS 2005-03-01 23:38:09.000000000 -0800
++++ linux-2.6.11.10/REPORTING-BUGS 2005-05-16 10:50:30.000000000 -0700
+@@ -16,6 +16,10 @@
+ describe how to recreate it. That is worth even more than the oops itself.
+ The list of maintainers is in the MAINTAINERS file in this directory.
+
++ If it is a security bug, please copy the Security Contact listed
++in the MAINTAINERS file. They can help coordinate bugfix and disclosure.
++See Documentation/SecurityBugs for more infomation.
++
+ If you are totally stumped as to whom to send the report, send it to
+ linux-kernel@xxxxxxxxxxxxxxxx (For more information on the linux-kernel
+ mailing list see http://www.tux.org/lkml/).
+diff -Naur linux-2.6.11/arch/ia64/kernel/fsys.S
linux-2.6.11.10/arch/ia64/kernel/fsys.S
+--- linux-2.6.11/arch/ia64/kernel/fsys.S 2005-03-01 23:38:34.000000000
-0800
++++ linux-2.6.11.10/arch/ia64/kernel/fsys.S 2005-05-16 10:50:30.000000000
-0700
+@@ -611,8 +611,10 @@
+ movl r2=ia64_ret_from_syscall
+ ;;
+ mov rp=r2 // set the real return addr
+- tbit.z p8,p0=r3,TIF_SYSCALL_TRACE
++ and r3=_TIF_SYSCALL_TRACEAUDIT,r3
+ ;;
++ cmp.eq p8,p0=r3,r0
++
+ (p10) br.cond.spnt.many ia64_ret_from_syscall // p10==true means out
registers are more than 8
+ (p8) br.call.sptk.many b6=b6 // ignore this return addr
+ br.cond.sptk ia64_trace_syscall
+diff -Naur linux-2.6.11/arch/ia64/kernel/signal.c
linux-2.6.11.10/arch/ia64/kernel/signal.c
+--- linux-2.6.11/arch/ia64/kernel/signal.c 2005-03-01 23:38:10.000000000
-0800
++++ linux-2.6.11.10/arch/ia64/kernel/signal.c 2005-05-16 10:50:30.000000000
-0700
+@@ -224,7 +224,8 @@
+ * could be corrupted.
+ */
+ retval = (long) &ia64_leave_kernel;
+- if (test_thread_flag(TIF_SYSCALL_TRACE))
++ if (test_thread_flag(TIF_SYSCALL_TRACE)
++ || test_thread_flag(TIF_SYSCALL_AUDIT))
+ /*
+ * strace expects to be notified after sigreturn returns even
though the
+ * context to which we return may not be in the middle of a
syscall.
+diff -Naur linux-2.6.11/arch/ppc/oprofile/op_model_fsl_booke.c
linux-2.6.11.10/arch/ppc/oprofile/op_model_fsl_booke.c
+--- linux-2.6.11/arch/ppc/oprofile/op_model_fsl_booke.c 2005-03-01
23:38:33.000000000 -0800
++++ linux-2.6.11.10/arch/ppc/oprofile/op_model_fsl_booke.c 2005-05-16
10:50:31.000000000 -0700
+@@ -150,7 +150,6 @@
+ int is_kernel;
+ int val;
+ int i;
+- unsigned int cpu = smp_processor_id();
+
+ /* set the PMM bit (see comment below) */
+ mtmsr(mfmsr() | MSR_PMM);
+@@ -162,7 +161,7 @@
+ val = ctr_read(i);
+ if (val < 0) {
+ if (oprofile_running && ctr[i].enabled) {
+- oprofile_add_sample(pc, is_kernel, i, cpu);
++ oprofile_add_pc(pc, is_kernel, i);
+ ctr_write(i, reset_value[i]);
+ } else {
+ ctr_write(i, 0);
+diff -Naur linux-2.6.11/arch/ppc/platforms/4xx/ebony.h
linux-2.6.11.10/arch/ppc/platforms/4xx/ebony.h
+--- linux-2.6.11/arch/ppc/platforms/4xx/ebony.h 2005-03-01
23:38:18.000000000 -0800
++++ linux-2.6.11.10/arch/ppc/platforms/4xx/ebony.h 2005-05-16
10:50:31.000000000 -0700
+@@ -61,8 +61,8 @@
+ */
+
+ /* OpenBIOS defined UART mappings, used before early_serial_setup */
+-#define UART0_IO_BASE (u8 *) 0xE0000200
+-#define UART1_IO_BASE (u8 *) 0xE0000300
++#define UART0_IO_BASE 0xE0000200
++#define UART1_IO_BASE 0xE0000300
+
+ /* external Epson SG-615P */
+ #define BASE_BAUD 691200
+diff -Naur linux-2.6.11/arch/ppc/platforms/4xx/luan.h
linux-2.6.11.10/arch/ppc/platforms/4xx/luan.h
+--- linux-2.6.11/arch/ppc/platforms/4xx/luan.h 2005-03-01 23:38:13.000000000
-0800
++++ linux-2.6.11.10/arch/ppc/platforms/4xx/luan.h 2005-05-16
10:50:31.000000000 -0700
+@@ -47,9 +47,9 @@
+ #define RS_TABLE_SIZE 3
+
+ /* PIBS defined UART mappings, used before early_serial_setup */
+-#define UART0_IO_BASE (u8 *) 0xa0000200
+-#define UART1_IO_BASE (u8 *) 0xa0000300
+-#define UART2_IO_BASE (u8 *) 0xa0000600
++#define UART0_IO_BASE 0xa0000200
++#define UART1_IO_BASE 0xa0000300
++#define UART2_IO_BASE 0xa0000600
+
+ #define BASE_BAUD 11059200
+ #define STD_UART_OP(num) \
+diff -Naur linux-2.6.11/arch/ppc/platforms/4xx/ocotea.h
linux-2.6.11.10/arch/ppc/platforms/4xx/ocotea.h
+--- linux-2.6.11/arch/ppc/platforms/4xx/ocotea.h 2005-03-01
23:38:08.000000000 -0800
++++ linux-2.6.11.10/arch/ppc/platforms/4xx/ocotea.h 2005-05-16
10:50:31.000000000 -0700
+@@ -56,8 +56,8 @@
+ #define RS_TABLE_SIZE 2
+
+ /* OpenBIOS defined UART mappings, used before early_serial_setup */
+-#define UART0_IO_BASE (u8 *) 0xE0000200
+-#define UART1_IO_BASE (u8 *) 0xE0000300
++#define UART0_IO_BASE 0xE0000200
++#define UART1_IO_BASE 0xE0000300
+
+ #define BASE_BAUD 11059200/16
+ #define STD_UART_OP(num) \
+diff -Naur linux-2.6.11/arch/sparc/kernel/ptrace.c
linux-2.6.11.10/arch/sparc/kernel/ptrace.c
+--- linux-2.6.11/arch/sparc/kernel/ptrace.c 2005-03-01 23:38:33.000000000
-0800
++++ linux-2.6.11.10/arch/sparc/kernel/ptrace.c 2005-05-16 10:50:31.000000000
-0700
+@@ -531,18 +531,6 @@
+ pt_error_return(regs, EIO);
+ goto out_tsk;
+ }
+- if (addr != 1) {
+- if (addr & 3) {
+- pt_error_return(regs, EINVAL);
+- goto out_tsk;
+- }
+-#ifdef DEBUG_PTRACE
+- printk ("Original: %08lx %08lx\n",
child->thread.kregs->pc, child->thread.kregs->npc);
+- printk ("Continuing with %08lx %08lx\n", addr, addr+4);
+-#endif
+- child->thread.kregs->pc = addr;
+- child->thread.kregs->npc = addr + 4;
+- }
+
+ if (request == PTRACE_SYSCALL)
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+diff -Naur linux-2.6.11/arch/sparc64/kernel/ptrace.c
linux-2.6.11.10/arch/sparc64/kernel/ptrace.c
+--- linux-2.6.11/arch/sparc64/kernel/ptrace.c 2005-03-01 23:38:32.000000000
-0800
++++ linux-2.6.11.10/arch/sparc64/kernel/ptrace.c 2005-05-16
10:50:31.000000000 -0700
+@@ -514,25 +514,6 @@
+ pt_error_return(regs, EIO);
+ goto out_tsk;
+ }
+- if (addr != 1) {
+- unsigned long pc_mask = ~0UL;
+-
+- if ((child->thread_info->flags & _TIF_32BIT) != 0)
+- pc_mask = 0xffffffff;
+-
+- if (addr & 3) {
+- pt_error_return(regs, EINVAL);
+- goto out_tsk;
+- }
+-#ifdef DEBUG_PTRACE
+- printk ("Original: %016lx %016lx\n",
+- child->thread_info->kregs->tpc,
+- child->thread_info->kregs->tnpc);
+- printk ("Continuing with %016lx %016lx\n", addr,
addr+4);
+-#endif
+- child->thread_info->kregs->tpc = (addr & pc_mask);
+- child->thread_info->kregs->tnpc = ((addr + 4) &
pc_mask);
+- }
+
+ if (request == PTRACE_SYSCALL) {
+ set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+diff -Naur linux-2.6.11/arch/sparc64/kernel/signal32.c
linux-2.6.11.10/arch/sparc64/kernel/signal32.c
+--- linux-2.6.11/arch/sparc64/kernel/signal32.c 2005-03-01
23:38:34.000000000 -0800
++++ linux-2.6.11.10/arch/sparc64/kernel/signal32.c 2005-05-16
10:50:31.000000000 -0700
+@@ -192,10 +192,13 @@
+ err |= __put_user(from->si_uid, &to->si_uid);
+ break;
+ case __SI_FAULT >> 16:
+- case __SI_POLL >> 16:
+ err |= __put_user(from->si_trapno, &to->si_trapno);
+ err |= __put_user((unsigned long)from->si_addr,
&to->si_addr);
+ break;
++ case __SI_POLL >> 16:
++ err |= __put_user(from->si_band, &to->si_band);
++ err |= __put_user(from->si_fd, &to->si_fd);
++ break;
+ case __SI_RT >> 16: /* This is not generated by the kernel as
of now. */
+ case __SI_MESGQ >> 16:
+ err |= __put_user(from->si_pid, &to->si_pid);
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |