|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] This patch should make x86-64 XenLinux more stable. Please apply.
ChangeSet 1.1581, 2005/05/28 10:08:54+01:00, kaf24@xxxxxxxxxxxxxxxxxxxx
This patch should make x86-64 XenLinux more stable. Please apply.
# Cleanups and improving stability by avoiding complex fixup at
critical section.
# Also fix error_entry with error set.
# Signed-off-by: Jun Nakajima <jun.nakajima@xxxxxxxxx>
# Signed-off-by: Li B Xin <li.b.xin@xxxxxxxxx>
I think the other was dropped (i.e. not applied in BK):
pfn_pte_ma.patch. Please apply it as well.
arch/xen/x86_64/kernel/entry.S | 154 ++++++++---------------------------
include/asm-xen/asm-x86_64/pgtable.h | 3
2 files changed, 39 insertions(+), 118 deletions(-)
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/x86_64/kernel/entry.S
b/linux-2.6.11-xen-sparse/arch/xen/x86_64/kernel/entry.S
--- a/linux-2.6.11-xen-sparse/arch/xen/x86_64/kernel/entry.S 2005-05-28
06:03:48 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/x86_64/kernel/entry.S 2005-05-28
06:03:48 -04:00
@@ -511,7 +511,15 @@
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
jnz retint_careful
-retint_restore_args:
+retint_restore_args:
+ movb EVENT_MASK-REST_SKIP(%rsp), %al
+ notb %al # %al == ~saved_mask
+ XEN_LOCK_VCPU_INFO_SMP(%rsi)
+ andb evtchn_upcall_mask(%rsi),%al
+ andb $1,%al # %al == mask & ~saved_mask
+ jnz restore_all_enable_events # != 0 => reenable event delivery
+ XEN_UNLOCK_VCPU_INFO_SMP(%rsi)
+
RESTORE_ARGS 0,8,0
testb $3,8(%rsp) # check CS
jnz user_mode
@@ -627,7 +635,7 @@
.macro errorentry sym
movq (%rsp),%rcx
movq 8(%rsp),%r11
- addq $0x18,%rsp /* rsp points to the error code */
+ addq $0x10,%rsp /* rsp points to the error code */
pushq %rax
leaq \sym(%rip),%rax
jmp error_entry
@@ -712,27 +720,19 @@
XEN_SAVE_UPCALL_MASK(%r11,%cl,EVENT_MASK)
0:
call *%rax
-error_check_event:
- movb EVENT_MASK(%rsp), %al
- notb %al # %al == ~saved_mask
- XEN_LOCK_VCPU_INFO_SMP(%rsi)
- andb evtchn_upcall_mask(%rsi),%al
- andb $1,%al # %al == mask & ~saved_mask
- jnz restore_all_enable_events # != 0 => reenable event delivery
- XEN_UNLOCK_VCPU_INFO_SMP(%rsi)
error_exit:
RESTORE_REST
/* cli */
+ XEN_GET_VCPU_INFO(%rsi)
+ XEN_BLOCK_EVENTS(%rsi)
GET_THREAD_INFO(%rcx)
- testb $3,CS-REST_SKIP(%rsp)
+ testb $3,CS-ARGOFFSET(%rsp)
jz retint_kernel
movl threadinfo_flags(%rcx),%edx
- movl $_TIF_WORK_MASK,%edi
+ movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
- jnz retint_careful
- RESTORE_ARGS 0,8,0
- SWITCH_TO_USER 0
- CFI_ENDPROC
+ jnz retint_careful
+ jmp retint_restore_args
error_kernelspace:
/*
@@ -777,132 +777,52 @@
# So, on entry to the handler we detect whether we interrupted an
# existing activation in its critical region -- if so, we pop the current
# activation and restart the handler using the previous one.
-
ENTRY(do_hypervisor_callback) # do_hyperviosr_callback(struct *pt_regs)
# Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
# see the correct pointer to the pt_regs
addq $8, %rsp # we don't return, adjust the stack frame
- movq RIP(%rsp),%rax
- cmpq $scrit,%rax
- jb 11f
- cmpq $ecrit,%rax
- jb critical_region_fixup
11: movb $0, EVENT_MASK(%rsp)
call evtchn_do_upcall
- jmp error_check_event
+ jmp error_exit
ALIGN
restore_all_enable_events:
XEN_UNBLOCK_EVENTS(%rsi) # %rsi is already set up...
+
scrit: /**** START OF CRITICAL REGION ****/
XEN_TEST_PENDING(%rsi)
jnz 14f # process more events if necessary...
XEN_UNLOCK_VCPU_INFO_SMP(%rsi)
- RESTORE_REST
RESTORE_ARGS 0,8,0
testb $3,8(%rsp) # check CS
jnz crit_user_mode
orb $3,1*8(%rsp)
iretq
crit_user_mode:
- SWITCH_TO_USER 0
+ SWITCH_TO_USER 0
14: XEN_LOCKED_BLOCK_EVENTS(%rsi)
XEN_UNLOCK_VCPU_INFO_SMP(%rsi)
+ SAVE_REST
movq %rsp,%rdi # set the argument again
jmp 11b
ecrit: /**** END OF CRITICAL REGION ****/
-# [How we do the fixup]. We want to merge the current stack frame with the
-# just-interrupted frame. How we do this depends on where in the critical
-# region the interrupted handler was executing, and so how many saved
-# registers are in each frame. We do this quickly using the lookup table
-# 'critical_fixup_table'. For each byte offset in the critical region, it
-# provides the number of bytes which have already been popped from the
-# interrupted stack frame.
-critical_region_fixup:
- subq $scrit,%rax
- shlq $1,%rax
- addq $critical_fixup_table,%rax
- movzwq (%rax),%rcx
- xorq %rax,%rax
- movb %ch,%al
- movb $0,%ch
-#ifdef CONFIG_SMP
- cmpb $0xff,%al
- jne 15f
- add $1,%al
- GET_THREAD_INFO(%rbp)
- XEN_UNLOCK_VCPU_INFO_SMP(%r11)
-15:
-#endif
- movq %rsp,%rsi
- movq %rsi,%rdi
- addq $0xa8,%rax
- addq %rax,%rdi
- addq %rcx,%rsi
- shrq $3,%rcx # convert words to bytes
- je 17f # skip loop if nothing to copy
-16: subq $8,%rsi # pre-decrementing copy loop
- subq $8,%rdi
- movq (%rsi),%rax
- movq %rax,(%rdi)
- loop 16b
-17: movq %rdi,%rsp # final %edi is top of merged stack
- jmp 11b
-
-critical_fixup_table:
- .byte 0x00,0x00,0x00,0x00 # testb $0xff,0x0(%rsi)
- .byte 0x00,0x00,0x00,0x00,0x00,0x00 # jne
<crit_user_mode+0x42>
- .byte 0x00,0x00,0x00,0x00 # mov (%rsp),%r15
- .byte 0x00,0x00,0x00,0x00,0x00 # mov 0x8(%rsp),%r14
- .byte 0x00,0x00,0x00,0x00,0x00 # mov 0x10(%rsp),%r13
- .byte 0x00,0x00,0x00,0x00,0x00 # mov 0x18(%rsp),%r12
- .byte 0x00,0x00,0x00,0x00,0x00 # mov 0x20(%rsp),%rbp
- .byte 0x00,0x00,0x00,0x00,0x00 # mov 0x28(%rsp),%rbx
- .byte 0x00,0x00,0x00,0x00 # add $0x30,%rsp
- .byte 0x30,0x30,0x30,0x30 # mov (%rsp),%r11
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x8(%rsp),%r10
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x10(%rsp),%r9
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x18(%rsp),%r8
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x20(%rsp),%rax
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x28(%rsp),%rcx
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x30(%rsp),%rdx
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x38(%rsp),%rsi
- .byte 0x30,0x30,0x30,0x30,0x30 # mov 0x40(%rsp),%rdi
- .byte 0x30,0x30,0x30,0x30 # add $0x50,%rsp
- .byte 0x80,0x80,0x80,0x80,0x80 # testb $0x3,0x8(%rsp)
- .byte 0x80,0x80 # jne ffffffff8010dc25
<crit_user_mode>
- .byte 0x80,0x80,0x80,0x80 # orb $0x3,0x8(%rsp)
- .byte 0x80,0x80 # iretq
- # <crit_user_mode>:
- .byte 0x80,0x80,0x80,0x80,0x80,0x80,0x80 # movq $0x0,%gs:0x60
- .byte 0x80,0x80,0x80,0x80,0x80
- .byte 0x80,0x80,0x80,0x80 # sub $0x20,%rsp
- .byte 0x60,0x60,0x60,0x60 # mov %rax,(%rsp)
- .byte 0x60,0x60,0x60,0x60,0x60 # mov %r11,0x8(%rsp)
- .byte 0x60,0x60,0x60,0x60,0x60 # mov %rcx,0x10(%rsp)
- .byte 0x60,0x60,0x60,0x60,0x60,0x60,0x60 # movq $0x0,0x18(%rsp)
- .byte 0x60,0x60
- .byte 0x60,0x60,0x60,0x60,0x60,0x60,0x60 # movq $0x33,0x28(%rsp)
- .byte 0x60,0x60
- .byte 0x60,0x60,0x60,0x60,0x60,0x60,0x60 # movq $0x2b,0x40(%rsp)
- .byte 0x60,0x60
- .byte 0x60,0x60,0x60,0x60,0x60,0x60,0x60 # mov $0x17,%rax
- .byte 0x60,0x60 # syscall
- .byte 0x60,0x60,0x60,0x60,0x60 # movb $0x1,0x1(%rsi)
- .byte 0x60,0x60,0x60 # mov %rsp,%rdi
- .byte 0x60,0x60,0x60,0x60,0x60 # jmpq
<do_hypervisor_callback+0x20>
+# At this point, unlike on x86-32, we don't do the fixup to simplify the
+# code and the stack frame is more complex on x86-64.
+# When the kernel is interrupted in the critical section, the kernel
+# will do IRET in that case, and everything will be restored at that point,
+# i.e. it just resumes from the next instruction interrupted with the same
context.
+
# Hypervisor uses this for application faults while it executes.
ENTRY(failsafe_callback)
- hlt
-#if 0
+ addq $0x10,%rsp /* skip rcx and r11 */
1: movl (%rsp),%ds
2: movl 8(%rsp),%es
3: movl 16(%rsp),%fs
4: movl 24(%rsp),%gs
- subq $14,%rsp
+ addq $0x20,%rsp /* skip the above selectors */
SAVE_ALL
- jmp ret_from_exception
+ jmp error_exit
.section .fixup,"ax"; \
6: movq $0,(%rsp); \
jmp 1b; \
@@ -914,13 +834,14 @@
jmp 4b; \
.previous; \
.section __ex_table,"a";\
- .align 8; \
- .long 1b,6b; \
- .long 2b,7b; \
- .long 3b,8b; \
- .long 4b,9b; \
+ .align 16; \
+ .quad 1b,6b; \
+ .quad 2b,7b; \
+ .quad 3b,8b; \
+ .quad 4b,9b; \
.previous
-
+
+#if 0
.section __ex_table,"a"
.align 8
.quad gs_change,bad_gs
@@ -933,7 +854,8 @@
movl %eax,%gs
jmp 2b
.previous
-#endif
+#endif
+
/*
* Create a kernel thread.
*
diff -Nru a/linux-2.6.11-xen-sparse/include/asm-xen/asm-x86_64/pgtable.h
b/linux-2.6.11-xen-sparse/include/asm-xen/asm-x86_64/pgtable.h
--- a/linux-2.6.11-xen-sparse/include/asm-xen/asm-x86_64/pgtable.h
2005-05-28 06:03:48 -04:00
+++ b/linux-2.6.11-xen-sparse/include/asm-xen/asm-x86_64/pgtable.h
2005-05-28 06:03:48 -04:00
@@ -66,7 +66,6 @@
printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e),
pmd_val(e))
#define pud_ERROR(e) \
printk("%s:%d: bad pud %p(%016lx).\n", __FILE__, __LINE__, &(e),
pud_val(e))
-
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e),
pgd_val(e))
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |