|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] Manual merge.
ChangeSet 1.1592, 2005/05/30 11:20:47+01:00, kaf24@xxxxxxxxxxxxxxxxxxxx
Manual merge.
process.c | 171 ++++++++++++++++++++++++++++----------------------------------
time.c | 146 +++++++++++++++++++++++++++++++++++++++-------------
2 files changed, 186 insertions(+), 131 deletions(-)
diff -Nru a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c
b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c
--- a/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c 2005-05-30
07:03:36 -04:00
+++ b/linux-2.6.11-xen-sparse/arch/xen/i386/kernel/process.c 2005-05-30
07:03:36 -04:00
@@ -13,6 +13,7 @@
#include <stdarg.h>
+#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/fs.h>
@@ -46,8 +47,7 @@
#include <asm/i387.h>
#include <asm/irq.h>
#include <asm/desc.h>
-#include <asm-xen/multicall.h>
-#include <asm-xen/xen-public/dom0_ops.h>
+#include <asm-xen/xen-public/physdev.h>
#ifdef CONFIG_MATH_EMULATION
#include <asm/math_emu.h>
#endif
@@ -55,6 +55,9 @@
#include <linux/irq.h>
#include <linux/err.h>
+#include <asm/tlbflush.h>
+#include <asm/cpu.h>
+
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
int hlt_counter;
@@ -106,6 +109,33 @@
}
}
+#ifdef CONFIG_HOTPLUG_CPU
+#include <asm/nmi.h>
+/* We don't actually take CPU down, just spin without interrupts. */
+static inline void play_dead(void)
+{
+ /* Ack it */
+ __get_cpu_var(cpu_state) = CPU_DEAD;
+
+ /* We shouldn't have to disable interrupts while dead, but
+ * some interrupts just don't seem to go away, and this makes
+ * it "work" for testing purposes. */
+ /* Death loop */
+ while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
+ HYPERVISOR_yield();
+
+ local_irq_disable();
+ __flush_tlb_all();
+ cpu_set(smp_processor_id(), cpu_online_map);
+ local_irq_enable();
+}
+#else
+static inline void play_dead(void)
+{
+ BUG();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
/*
* The idle thread. There's no useful work to be
* done, so just try to conserve power and have a
@@ -124,6 +154,9 @@
cpu_clear(cpu, cpu_idle_map);
rmb();
+ if (cpu_is_offline(cpu))
+ play_dead();
+
irq_stat[cpu].idle_timestamp = jiffies;
xen_idle();
}
@@ -221,20 +254,11 @@
/* The process may have allocated an io port bitmap... nuke it. */
if (unlikely(NULL != t->io_bitmap_ptr)) {
- int cpu = get_cpu();
- struct tss_struct *tss = &per_cpu(init_tss, cpu);
-
+ physdev_op_t op = { 0 };
+ op.cmd = PHYSDEVOP_SET_IOBITMAP;
+ HYPERVISOR_physdev_op(&op);
kfree(t->io_bitmap_ptr);
t->io_bitmap_ptr = NULL;
- /*
- * Careful, clear this in the TSS too:
- */
- memset(tss->io_bitmap, 0xff, tss->io_bitmap_max);
- t->io_bitmap_max = 0;
- tss->io_bitmap_owner = NULL;
- tss->io_bitmap_max = 0;
- tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
- put_cpu();
}
}
@@ -283,7 +307,6 @@
struct pt_regs * childregs;
struct task_struct *tsk;
int err;
- unsigned long eflags;
childregs = ((struct pt_regs *) (THREAD_SIZE + (unsigned long)
p->thread_info)) - 1;
*childregs = *regs;
@@ -333,9 +356,7 @@
desc->b = LDT_entry_b(&info);
}
-
- __asm__ __volatile__ ( "pushfl; popl %0" : "=r" (eflags) : );
- p->thread.io_pl = (eflags >> 12) & 3;
+ p->thread.io_pl = current->thread.io_pl;
err = 0;
out:
@@ -408,37 +429,6 @@
return 1;
}
-static inline void
-handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
-{
- if (!next->io_bitmap_ptr) {
- /*
- * Disable the bitmap via an invalid offset. We still cache
- * the previous bitmap owner and the IO bitmap contents:
- */
- tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
- return;
- }
- if (likely(next == tss->io_bitmap_owner)) {
- /*
- * Previous owner of the bitmap (hence the bitmap content)
- * matches the next task, we dont have to do anything but
- * to set a valid offset in the TSS:
- */
- tss->io_bitmap_base = IO_BITMAP_OFFSET;
- return;
- }
- /*
- * Lazy TSS's I/O bitmap copy. We set an invalid offset here
- * and we let the task to get a GPF in case an I/O instruction
- * is performed. The handler of the GPF will verify that the
- * faulting task has a valid I/O bitmap and, it true, does the
- * real copy and restart the instruction. This will save us
- * redundant copies when the currently switched task does not
- * perform any I/O during its timeslice.
- */
- tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
-}
/*
* This special macro can be used to load a debugging register
*/
@@ -479,29 +469,10 @@
*next = &next_p->thread;
int cpu = smp_processor_id();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
- dom0_op_t op;
-
- /* NB. No need to disable interrupts as already done in sched.c */
- /* __cli(); */
-
- /*
- * Save away %fs and %gs. No need to save %es and %ds, as
- * those are always kernel segments while inside the kernel.
- */
- asm volatile("movl %%fs,%0":"=m" (*(int *)&prev->fs));
- asm volatile("movl %%gs,%0":"=m" (*(int *)&prev->gs));
-
- /*
- * We clobber FS and GS here so that we avoid a GPF when restoring
- * previous task's FS/GS values in Xen when the LDT is switched.
- */
- __asm__ __volatile__ (
- "xorl %%eax,%%eax; movl %%eax,%%fs; movl %%eax,%%gs" : : :
- "eax" );
-
- MULTICALL_flush_page_update_queue();
+ physdev_op_t iopl_op, iobmp_op;
+ multicall_entry_t _mcl[8], *mcl = _mcl;
- /* never put a printk in __switch_to... printk() calls wake_up*()
indirectly */
+ /* XEN NOTE: FS/GS saved in switch_mm(), not here. */
/*
* This is basically '__unlazy_fpu', except that we queue a
@@ -510,7 +481,9 @@
*/
if (prev_p->thread_info->status & TS_USEDFPU) {
__save_init_fpu(prev_p); /* _not_ save_init_fpu() */
- queue_multicall0(__HYPERVISOR_fpu_taskswitch);
+ mcl->op = __HYPERVISOR_fpu_taskswitch;
+ mcl->args[0] = 1;
+ mcl++;
}
/*
@@ -518,35 +491,50 @@
* This is load_esp0(tss, next) with a multicall.
*/
tss->esp0 = next->esp0;
- queue_multicall2(__HYPERVISOR_stack_switch, tss->ss0, tss->esp0);
+ mcl->op = __HYPERVISOR_stack_switch;
+ mcl->args[0] = tss->ss0;
+ mcl->args[1] = tss->esp0;
+ mcl++;
/*
* Load the per-thread Thread-Local Storage descriptor.
* This is load_TLS(next, cpu) with multicalls.
*/
-#define C(i) do { \
- if (unlikely(next->tls_array[i].a != prev->tls_array[i].a || \
- next->tls_array[i].b != prev->tls_array[i].b)) \
- queue_multicall3(__HYPERVISOR_update_descriptor, \
- virt_to_machine(&get_cpu_gdt_table(cpu) \
- [GDT_ENTRY_TLS_MIN + i]), \
- ((u32 *)&next->tls_array[i])[0], \
- ((u32 *)&next->tls_array[i])[1]); \
+#define C(i) do { \
+ if (unlikely(next->tls_array[i].a != prev->tls_array[i].a || \
+ next->tls_array[i].b != prev->tls_array[i].b)) { \
+ mcl->op = __HYPERVISOR_update_descriptor; \
+ mcl->args[0] = virt_to_machine(&get_cpu_gdt_table(cpu) \
+ [GDT_ENTRY_TLS_MIN + i]); \
+ mcl->args[1] = ((u32 *)&next->tls_array[i])[0]; \
+ mcl->args[2] = ((u32 *)&next->tls_array[i])[1]; \
+ mcl++; \
+ } \
} while (0)
C(0); C(1); C(2);
#undef C
- if (xen_start_info.flags & SIF_PRIVILEGED) {
- op.cmd = DOM0_IOPL;
- op.u.iopl.domain = DOMID_SELF;
- op.u.iopl.iopl = next->io_pl;
- op.interface_version = DOM0_INTERFACE_VERSION;
- queue_multicall1(__HYPERVISOR_dom0_op, (unsigned long)&op);
+ if (unlikely(prev->io_pl != next->io_pl)) {
+ iopl_op.cmd = PHYSDEVOP_SET_IOPL;
+ iopl_op.u.set_iopl.iopl = next->io_pl;
+ mcl->op = __HYPERVISOR_physdev_op;
+ mcl->args[0] = (unsigned long)&iopl_op;
+ mcl++;
+ }
+
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |