|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] merge
# HG changeset patch
# User kaf24@xxxxxxxxxxxxxxxxxxxx
# Node ID a4bd444c54249beefabfd9608ff04a61be569215
# Parent 19e5385bc5b3a4fd147c85e95875d62a644d8515
# Parent b47b795857727e0489812cdaf7881f0c94bf0d70
merge
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/examples/network-bridge
--- a/tools/examples/network-bridge Mon Nov 7 11:52:49 2005
+++ b/tools/examples/network-bridge Mon Nov 7 11:53:38 2005
@@ -195,11 +195,17 @@
return
fi
+ if ! ip link show 2>/dev/null | grep -q "^[0-9]*: ${vdev}"; then
+ echo "
+Link $vdev is missing.
+This may be because you have reached the limit of the number of interfaces
+that the loopback driver supports. If the loopback driver is a module, you
+may raise this limit by passing it as a parameter (nloopbacks=<N>).
+" >&2
+ exit 1
+ fi
+
create_bridge ${bridge}
-
- if ! ip link show 2>/dev/null | grep -q "^[0-9]*: ${vdev}"; then
- return
- fi
if ip link show ${vdev} 2>/dev/null >/dev/null; then
mac=`ip link show ${netdev} | grep 'link\/ether' | sed -e 's/.*ether
\(..:..:..:..:..:..\).*/\1/'`
@@ -232,7 +238,7 @@
if [ -z "${kmask}" ]; then
PREFIX=32;
else
- legacy_to_prefix ${kmask};
+ legacy_mask_to_prefix ${kmask};
fi
ip addr add ${kip}/${PREFIX} dev ${netdev}
ip link set dev ${netdev} up
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/python/xen/xend/XendDomainInfo.py
--- a/tools/python/xen/xend/XendDomainInfo.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xend/XendDomainInfo.py Mon Nov 7 11:53:38 2005
@@ -336,7 +336,7 @@
return domlist[0]
except Exception, err:
# ignore missing domain
- log.debug("domain_getinfo(%d) failed, ignoring: %s", dom, str(err))
+ log.trace("domain_getinfo(%d) failed, ignoring: %s", dom, str(err))
return None
@@ -569,6 +569,8 @@
self.storeDomDetails()
self.refreshShutdown()
+ log.debug("XendDomainInfo.completeRestore done")
+
def storeVmDetails(self):
to_store = {
@@ -1066,8 +1068,11 @@
assert self.domid is not None
assert self.store_mfn is not None
assert self.store_port is not None
-
- IntroduceDomain(self.domid, self.store_mfn, self.store_port)
+
+ try:
+ IntroduceDomain(self.domid, self.store_mfn, self.store_port)
+ except RuntimeError, exn:
+ raise XendError(str(exn))
def initDomain(self):
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/python/xen/xend/server/DevController.py
--- a/tools/python/xen/xend/server/DevController.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xend/server/DevController.py Mon Nov 7 11:53:38 2005
@@ -57,6 +57,8 @@
@return The ID for the newly created device.
"""
(devid, back, front) = self.getDeviceDetails(config)
+ if devid is None:
+ return 0
self.writeDetails(config, devid, back, front)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/python/xen/xend/server/blkif.py
--- a/tools/python/xen/xend/server/blkif.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xend/server/blkif.py Mon Nov 7 11:53:38 2005
@@ -43,7 +43,7 @@
dev = sxp.child_value(config, 'dev')
if re.match('^ioemu:', dev):
- return (0,{},{})
+ return (None,{},{})
devid = blkif.blkdev_name_to_number(dev)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/python/xen/xend/server/netif.py
--- a/tools/python/xen/xend/server/netif.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xend/server/netif.py Mon Nov 7 11:53:38 2005
@@ -21,6 +21,7 @@
"""
import os
+import random
from xen.xend import sxp
from xen.xend import XendRoot
@@ -29,6 +30,25 @@
xroot = XendRoot.instance()
+
+
+def randomMAC():
+ """Generate a random MAC address.
+
+ Uses OUI (Organizationally Unique Identifier) AA:00:00, an
+ unassigned one that used to belong to DEC. The OUI list is
+ available at 'standards.ieee.org'.
+
+ The remaining 3 fields are random, with the first bit of the first
+ random field set 0.
+
+ @return: MAC address string
+ """
+ mac = [ 0xaa, 0x00, 0x00,
+ random.randint(0x00, 0x7f),
+ random.randint(0x00, 0xff),
+ random.randint(0x00, 0xff) ]
+ return ':'.join(map(lambda x: "%02x" % x, mac))
class NetifController(DevController):
@@ -56,6 +76,9 @@
ipaddr = _get_config_ipaddr(config)
devid = self.allocateDeviceID()
+
+ if not mac:
+ mac = randomMAC()
back = { 'script' : script,
'mac' : mac,
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/python/xen/xend/xenstore/xstransact.py
--- a/tools/python/xen/xend/xenstore/xstransact.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xend/xenstore/xstransact.py Mon Nov 7 11:53:38 2005
@@ -11,6 +11,8 @@
class xstransact:
def __init__(self, path):
+ assert path is not None
+
self.in_transaction = False # Set this temporarily -- if this
# constructor fails, then we need to
# protect __del__.
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/python/xen/xm/create.py
--- a/tools/python/xen/xm/create.py Mon Nov 7 11:52:49 2005
+++ b/tools/python/xen/xm/create.py Mon Nov 7 11:53:38 2005
@@ -19,7 +19,6 @@
"""Domain creation.
"""
-import random
import os
import os.path
import string
@@ -497,24 +496,6 @@
config_devs.append(['device', config_tpmif])
-def randomMAC():
- """Generate a random MAC address.
-
- Uses OUI (Organizationally Unique Identifier) AA:00:00, an
- unassigned one that used to belong to DEC. The OUI list is
- available at 'standards.ieee.org'.
-
- The remaining 3 fields are random, with the first bit of the first
- random field set 0.
-
- @return: MAC address string
- """
- mac = [ 0xaa, 0x00, 0x00,
- random.randint(0x00, 0x7f),
- random.randint(0x00, 0xff),
- random.randint(0x00, 0xff) ]
- return ':'.join(map(lambda x: "%02x" % x, mac))
-
def configure_vifs(config_devs, vals):
"""Create the config for virtual network interfaces.
"""
@@ -525,8 +506,6 @@
if idx < len(vifs):
d = vifs[idx]
mac = d.get('mac')
- if not mac:
- mac = randomMAC()
be_mac = d.get('be_mac')
bridge = d.get('bridge')
script = d.get('script')
@@ -534,8 +513,7 @@
ip = d.get('ip')
vifname = d.get('vifname')
else:
-
- mac = randomMAC()
+ mac = None
be_mac = None
bridge = None
script = None
@@ -543,7 +521,8 @@
ip = None
vifname = None
config_vif = ['vif']
- config_vif.append(['mac', mac])
+ if mac:
+ config_vif.append(['mac', mac])
if vifname:
config_vif.append(['vifname', vifname])
if be_mac:
@@ -925,8 +904,6 @@
def main(argv):
- random.seed()
-
(opts, config) = parseCommandLine(argv)
if not opts:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xenstore/xenstored_core.c
--- a/tools/xenstore/xenstored_core.c Mon Nov 7 11:52:49 2005
+++ b/tools/xenstore/xenstored_core.c Mon Nov 7 11:53:38 2005
@@ -56,6 +56,7 @@
static bool verbose;
LIST_HEAD(connections);
static int tracefd = -1;
+static char *tracefile = NULL;
static TDB_CONTEXT *tdb_ctx;
#ifdef TESTING
@@ -242,6 +243,21 @@
talloc_free(str);
}
+void reopen_log()
+{
+ if (!tracefile)
+ return;
+
+ if (tracefd > 0)
+ close(tracefd);
+ tracefd = open(tracefile, O_WRONLY|O_CREAT|O_APPEND, 0600);
+ if (tracefd < 0) {
+ perror("Could not open tracefile");
+ return;
+ }
+ write(tracefd, "\n***\n", strlen("\n***\n"));
+}
+
static bool write_messages(struct connection *conn)
{
int ret;
@@ -1498,11 +1514,7 @@
outputpid = true;
break;
case 'T':
- tracefd = open(optarg, O_WRONLY|O_CREAT|O_APPEND, 0600);
- if (tracefd < 0)
- barf_perror("Could not open tracefile %s",
- optarg);
- write(tracefd, "\n***\n", strlen("\n***\n"));
+ tracefile = optarg;
break;
case 'V':
verbose = true;
@@ -1511,6 +1523,8 @@
}
if (optind != argc)
barf("%s: No arguments desired", argv[0]);
+
+ reopen_log();
if (dofork) {
openlog("xenstored", 0, LOG_DAEMON);
@@ -1577,6 +1591,8 @@
close(STDOUT_FILENO);
close(STDERR_FILENO);
}
+
+ signal(SIGHUP, reopen_log);
#ifdef TESTING
signal(SIGUSR1, stop_failtest);
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/COPYING
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/COPYING Mon Nov 7 11:53:38 2005
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ChangeLog
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ChangeLog Mon Nov 7 11:53:38 2005
@@ -0,0 +1,11 @@
+0.1.1
+ Dan Smith <danms@xxxxxxxxxx>
+
+ - More tests
+ - Added build check for Flex/Bison
+
+
+0.1.0
+ Dan Smith <danms@xxxxxxxxxx>
+
+ - initial release
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,15 @@
+SUBDIRS = ramdisk tests
+EXTRA_DIST = lib runtest.sh mkreport
+
+# Remove any pyc's, CVS dirs, and prune the skel dirs
+dist-hook:
+ find $(distdir) -name '*~' -delete -print
+ find $(distdir) -name '*.pyc' -delete -print
+ for i in Root Repository Entries; do \
+ find $(distdir) -name $$i -delete ;\
+ done
+ find $(distdir) -name CVS -delete
+ find $(distdir) -name '*.test' -delete
+ cd $(distdir)/ramdisk/skel && find . -empty -delete
+ chmod a+x $(distdir)/runtest.sh
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,578 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/configure \
+ $(top_srcdir)/lib/XmTestLib/config.py.in \
+ $(top_srcdir)/lib/XmTestReport/xmtest.py.in COPYING ChangeLog \
+ TODO install-sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = lib/XmTestReport/xmtest.py \
+ lib/XmTestLib/config.py
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = ramdisk tests
+EXTRA_DIST = lib runtest.sh mkreport
+all: all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
+ cd $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+lib/XmTestReport/xmtest.py: $(top_builddir)/config.status
$(top_srcdir)/lib/XmTestReport/xmtest.py.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+lib/XmTestLib/config.py: $(top_builddir)/config.status
$(top_srcdir)/lib/XmTestLib/config.py.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ $(mkdir_p) $(distdir)/lib/XmTestLib $(distdir)/lib/XmTestReport
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {}
\; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
+ $(am__remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c
>$(distdir).tar.gz
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e
's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base"
\
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+ check-am clean clean-generic clean-recursive ctags \
+ ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
+ dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-generic distclean-recursive distclean-tags \
+ distcleancheck distdir distuninstallcheck dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+# Remove any pyc's, CVS dirs, and prune the skel dirs
+dist-hook:
+ find $(distdir) -name '*~' -delete -print
+ find $(distdir) -name '*.pyc' -delete -print
+ for i in Root Repository Entries; do \
+ find $(distdir) -name $$i -delete ;\
+ done
+ find $(distdir) -name CVS -delete
+ find $(distdir) -name '*.test' -delete
+ cd $(distdir)/ramdisk/skel && find . -empty -delete
+ chmod a+x $(distdir)/runtest.sh
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/README
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/README Mon Nov 7 11:53:38 2005
@@ -0,0 +1,133 @@
+
+xm-test README
+
+Copyright (C) International Business Machines Corp., 2005
+Author(s): Dan Smith <danms@xxxxxxxxxx>
+ Woody Marvel <marvel@xxxxxxxxxx>
+
+Overview
+========
+
+This suite provides a framework for testing the Xen userspace tools.
+The directory structure is:
+
+ ./xm-test
+ |
+ +-/lib: Python support libraries
+ |
+ +-/ramdisk: Staging area for building the test ramdisk
+ |
+ +-/tests
+ | |
+ | +-/create: Tests for the 'xm create' command
+ | +-/destroy: Tests for the 'xm destroy' command
+ | . . .
+ |
+ +-/utils: Utility scripts for ramdisk building
+
+
+Building
+========
+
+Before the test suite can be used, the ramdisk must be built from
+source. All source needed for this process is automatically
+downloaded, extracted, and compiled. Due to the need to create
+special files, this process must be done as root:
+
+ # ./configure
+ # make
+
+NB: If you have the initrd.img from a previous version of xm-test, you
+can copy it into the ramdisk directory to eliminate the need to
+rebuild it. So far, nothing has changed in the ramdisk since xm-test
+version 0.1.1. If you do this, there is no need to run 'make' again.
+Simply copy the initrd.img file into ramdisk/ and then run the
+runtest.sh script.
+
+
+Running
+=======
+
+By running "./runtest.sh logfile" at the top level, all tests will be
+run in alphabetic order. To run a specific test group, run "make
+check" from inside that group directory. For example:
+
+ # cd tests/create
+ # make check
+
+The runtest.sh script will create several files, including a .report
+file, which is the cleaned up, email-friendly report of failures.
+Additionally, the script will submit your results to the development
+team for trend analysis. This helps us determine the level of success
+people "out there" are having with different versions of Xen.
+
+If you wish to run xm-test in an automated batch environment, you can
+run the script with the "-b" flag, which will try to prevent it from
+asking any questions interactively. You should run it manually at
+least once to generate the "contact_info" file, which will be used in
+subsequent runs.
+
+BIG FAT WARNING: The framework assumes it is running on a dedicated
+machine. As such, the library automatically destroys any running
+DomUs on the sytem to provide each test with a "clean slate".
+
+
+Extending
+=========
+
+Additional tests may be added in existing groups to test additional
+cases for a given xm subcommand. Test programs should be named
+according to the following scheme:
+
+ XY_group_name_{pos,neg}.py
+
+Where:
+ XY is the next number in line
+ group is the name of the subcommand being tested
+ name is the short name of the test
+ {pos,neg} denotes whether this is a positive or negative test case
+
+New subcommand groups should be added as directories named after the
+subcommand itself. The "Makefile.am.template" should be copied into
+the new group directory as "Makefile.am".
+
+
+Developer Notes
+===============
+
+Our library provides a DomU console abstraction for automated
+execution of commands. Please note that this is relatively fragile,
+and is intended for use only with the ramdisk built by the framework.
+Because the console experiences some occasional corruption, this
+method is not completely perfect at the moment, although the authors
+use it with relatively few problems.
+
+
+Known Issues
+============
+
+- 08/22/2005 Dan Smith:
+ Current versions of Xen experience long delays on
+ boot, due to the blkif frontend waiting (and timing
+ out) for the backend. We now implicitly introduce
+ a pause in XmTestDomain.start() to remedy
+ this across all tests that need it.
+
+- 09/22/2005 Dan Smith:
+ The save, restore, and migrate tests have been turned
+ back on, as we have implemented timeout functionality
+ in "traceCommand". Since migrate is known to hang, we
+ can now safely include it in the default test run, and
+ have it be killed if it never finishes. As before,
+ feedback about these tests would be specifically
+ appreciated.
+
+Reporting Bugs
+==============
+
+If you find a bug in the test framework, report it to:
+
+ Dan Smith <danms@xxxxxxxxxx>
+
+If you find a bug in a specific test case, contact the author of the
+test case first.
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/TODO
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/TODO Mon Nov 7 11:53:38 2005
@@ -0,0 +1,3 @@
+Todo List for xm-test
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/aclocal.m4
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/aclocal.m4 Mon Nov 7 11:53:38 2005
@@ -0,0 +1,850 @@
+# generated automatically by aclocal 1.9.5 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005 Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+ [AM_AUTOMAKE_VERSION([1.9.5])])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 7
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 8
+
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+ifelse([$1], CC, [depcc="$CC" am_compiler_list=],
+ [$1], CXX, [depcc="$CXX" am_compiler_list=],
+ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+#serial 3
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`AS_DIRNAME("$mf")`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`AS_DIRNAME(["$file"])`
+ AS_MKDIR_P([$dirpart/$fdir])
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled. FIXME. This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 12
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean"
there first])
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES(CC)],
+ [define([AC_PROG_CC],
+ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES(CXX)],
+ [define([AC_PROG_CXX],
+ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $1 | $1:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+
+# Copyright (C) 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" =
"done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+
+# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+#
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake. There are at least two reasons why we must not
+# use `-m 0755':
+# - it causes special bits like SGID to be ignored,
+# - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out. Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+AC_SUBST([mkdir_p])])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 3
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 4
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+
+# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004, 2005 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 2
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+ [m4_case([$1], [ustar],, [pax],,
+ [m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar;
+ do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf -
"'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+done
+rm -rf conftest.dir
+
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/configure
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/configure Mon Nov 7 11:53:38 2005
@@ -0,0 +1,4364 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.59 for xm-test 0.4.0.
+#
+# Copyright (C) 2003 Free Software Foundation, Inc.
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || {
BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX
shell" >&2
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+
+# Name of the host.
+# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+exec 6>&1
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_config_libobj_dir=.
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+# Maximum number of lines to put in a shell here document.
+# This variable seems obsolete. It should probably be removed, and
+# only ac_max_sed_lines should be used.
+: ${ac_max_here_lines=38}
+
+# Identity of this package.
+PACKAGE_NAME='xm-test'
+PACKAGE_TARNAME='xm-test'
+PACKAGE_VERSION='0.4.0'
+PACKAGE_STRING='xm-test 0.4.0'
+PACKAGE_BUGREPORT=''
+
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME
PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix
program_transform_name bindir sbindir libexecdir datadir sysconfdir
sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir
build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS
INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL
AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP
INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar
am__untar CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include
am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE
am__fastdepCC_FALSE ENABLE_VMX TENV YACC LEX LEXLIB LEX_OUTPUT_ROOT LIBOBJS
LTLIBOBJS'
+ac_subst_files=''
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+ac_prev=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_option in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ eval "enable_$ac_feature=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid feature name: $ac_feature" >&2
+ { (exit 1); exit 1; }; }
+ ac_feature=`echo $ac_feature | sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_$ac_feature='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case $ac_option in
+ *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_$ac_package='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid package name: $ac_package" >&2
+ { (exit 1); exit 1; }; }
+ ac_package=`echo $ac_package | sed 's/-/_/g'`
+ eval "with_$ac_package=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) { echo "$as_me: error: unrecognized option: $ac_option
+Try \`$0 --help' for more information." >&2
+ { (exit 1); exit 1; }; }
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
+ { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
+ { (exit 1); exit 1; }; }
+ ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
+ eval "$ac_envvar='$ac_optarg'"
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : ${build_alias=$ac_option} ${host_alias=$ac_option}
${target_alias=$ac_option}
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ { echo "$as_me: error: missing argument to $ac_option" >&2
+ { (exit 1); exit 1; }; }
+fi
+
+# Be sure to have absolute paths.
+for ac_var in exec_prefix prefix
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# Be sure to have absolute paths.
+for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
+ localstatedir libdir includedir oldincludedir infodir mandir
+do
+ eval ac_val=$`echo $ac_var`
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) ;;
+ *) { echo "$as_me: error: expected an absolute directory name for
--$ac_var: $ac_val" >&2
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ echo "$as_me: WARNING: If you wanted to set the --build type, don't use
--host.
+ If a cross compiler is detected then cross compile mode will be used." >&2
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_confdir=`(dirname "$0") 2>/dev/null ||
+$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$0" : 'X\(//\)[^/]' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$0" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in
$ac_confdir or .." >&2
+ { (exit 1); exit 1; }; }
+ else
+ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir"
>&2
+ { (exit 1); exit 1; }; }
+ fi
+fi
+(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null ||
+ { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not
work" >&2
+ { (exit 1); exit 1; }; }
+srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
+ac_env_build_alias_set=${build_alias+set}
+ac_env_build_alias_value=$build_alias
+ac_cv_env_build_alias_set=${build_alias+set}
+ac_cv_env_build_alias_value=$build_alias
+ac_env_host_alias_set=${host_alias+set}
+ac_env_host_alias_value=$host_alias
+ac_cv_env_host_alias_set=${host_alias+set}
+ac_cv_env_host_alias_value=$host_alias
+ac_env_target_alias_set=${target_alias+set}
+ac_env_target_alias_value=$target_alias
+ac_cv_env_target_alias_set=${target_alias+set}
+ac_cv_env_target_alias_value=$target_alias
+ac_env_CC_set=${CC+set}
+ac_env_CC_value=$CC
+ac_cv_env_CC_set=${CC+set}
+ac_cv_env_CC_value=$CC
+ac_env_CFLAGS_set=${CFLAGS+set}
+ac_env_CFLAGS_value=$CFLAGS
+ac_cv_env_CFLAGS_set=${CFLAGS+set}
+ac_cv_env_CFLAGS_value=$CFLAGS
+ac_env_LDFLAGS_set=${LDFLAGS+set}
+ac_env_LDFLAGS_value=$LDFLAGS
+ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
+ac_cv_env_LDFLAGS_value=$LDFLAGS
+ac_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_env_CPPFLAGS_value=$CPPFLAGS
+ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
+ac_cv_env_CPPFLAGS_value=$CPPFLAGS
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures xm-test 0.4.0 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+_ACEOF
+
+ cat <<_ACEOF
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --infodir=DIR info documentation [PREFIX/info]
+ --mandir=DIR man documentation [PREFIX/man]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of xm-test 0.4.0:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --disable-dependency-tracking speeds up one-time build
+ --enable-dependency-tracking do not reject slow dependency extractors
+ --enable-vmx-support use block devices instead of ramdisks
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+_ACEOF
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ ac_popdir=`pwd`
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d $ac_dir || continue
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+ cd $ac_dir
+ # Check for guested configure; otherwise get Cygnus style configure.
+ if test -f $ac_srcdir/configure.gnu; then
+ echo
+ $SHELL $ac_srcdir/configure.gnu --help=recursive
+ elif test -f $ac_srcdir/configure; then
+ echo
+ $SHELL $ac_srcdir/configure --help=recursive
+ elif test -f $ac_srcdir/configure.ac ||
+ test -f $ac_srcdir/configure.in; then
+ echo
+ $ac_configure --help
+ else
+ echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi
+ cd $ac_popdir
+ done
+fi
+
+test -n "$ac_init_help" && exit 0
+if $ac_init_version; then
+ cat <<\_ACEOF
+xm-test configure 0.4.0
+generated by GNU Autoconf 2.59
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit 0
+fi
+exec 5>config.log
+cat >&5 <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by xm-test $as_me 0.4.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+hostinfo = `(hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ echo "PATH: $as_dir"
+done
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_sep=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
+ 2)
+ ac_configure_args1="$ac_configure_args1 '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
+ # Get rid of the leading space.
+ ac_sep=" "
+ ;;
+ esac
+ done
+done
+$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || {
ac_configure_args0=; export ac_configure_args0; }
+$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || {
ac_configure_args1=; export ac_configure_args1; }
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Be sure not to use single quotes in there, as some shells,
+# such as our DU 5.0 friend, will then `close' the trap.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+{
+ (set) 2>&1 |
+ case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ sed -n \
+ "s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
+
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
+ ;;
+ *)
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+}
+ echo
+
+ cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ cat <<\_ASBOX
+## ------------- ##
+## Output files. ##
+## ------------- ##
+_ASBOX
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=$`echo $ac_var`
+ echo "$ac_var='"'"'$ac_val'"'"'"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+ echo
+ sed "/^$/d" confdefs.h | sort
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ echo "$as_me: caught signal $ac_signal"
+ echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core &&
+ rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+ ' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo >confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site
$ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
+echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special
+ # files actually), so we avoid doing that.
+ if test -f "$cache_file"; then
+ { echo "$as_me:$LINENO: loading cache $cache_file" >&5
+echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . $cache_file;;
+ *) . ./$cache_file;;
+ esac
+ fi
+else
+ { echo "$as_me:$LINENO: creating cache $cache_file" >&5
+echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in `(set) 2>&1 |
+ sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val="\$ac_cv_env_${ac_var}_value"
+ eval ac_new_val="\$ac_env_${ac_var}_value"
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in
the previous run" >&5
+echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run"
>&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous
run" >&5
+echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the
previous run:" >&5
+echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ { echo "$as_me:$LINENO: former value: $ac_old_val" >&5
+echo "$as_me: former value: $ac_old_val" >&2;}
+ { echo "$as_me:$LINENO: current value: $ac_new_val" >&5
+echo "$as_me: current value: $ac_new_val" >&2;}
+ ac_cache_corrupted=:
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+ ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { echo "$as_me:$LINENO: error: changes in the environment can compromise the
build" >&5
+echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm
$cache_file' and start over" >&5
+echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start
over" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext
$LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+am__api_version="1.9"
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f $ac_dir/shtool; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in
$srcdir $srcdir/.. $srcdir/../.." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in $srcdir
$srcdir/.. $srcdir/../.." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"
+ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+if test -z "$INSTALL"; then
+if test "${ac_cv_path_install+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in
+ ./ | .// | /cC/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+done
+
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL=$ac_install_sh
+ fi
+fi
+echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftest.file`
+ fi
+ rm -f conftest.file
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there
is not a broken
+alias in your environment" >&5
+echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ { { echo "$as_me:$LINENO: error: newly created file is older than
distributed files!
+Check your system clock" >&5
+echo "$as_me: error: newly created file is older than distributed files!
+Check your system clock" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,$program_prefix,;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+# Double any \ or $. echo might interpret backslashes.
+# By default was `s,x,x', remove it if useless.
+cat <<\_ACEOF >conftest.sed
+s/[\\$]/&&/g;s/;s,x,x,$//
+_ACEOF
+program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
+rm conftest.sed
+
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+ am_missing_run="$MISSING --run "
+else
+ am_missing_run=
+ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
+fi
+
+if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+ # We used to keeping the `.' as first argument, in order to
+ # allow $(mkdir_p) to be used without argument. As in
+ # $(mkdir_p) $(somedir)
+ # where $(somedir) is conditionally defined. However this is wrong
+ # for two reasons:
+ # 1. if the package is installed by a user who cannot write `.'
+ # make install will fail,
+ # 2. the above comment should most certainly read
+ # $(mkdir_p) $(DESTDIR)$(somedir)
+ # so it does not work when $(somedir) is undefined and
+ # $(DESTDIR) is not.
+ # To support the latter case, we have to write
+ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+ # so the `.' trick is pointless.
+ mkdir_p='mkdir -p --'
+else
+ # On NextStep and OpenStep, the `mkdir' command does not
+ # recognize any option. It will interpret all options as
+ # directories to create, and then abort because `.' already
+ # exists.
+ for d in ./-p ./--version;
+ do
+ test -d $d && rmdir $d
+ done
+ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+ if test -f "$ac_aux_dir/mkinstalldirs"; then
+ mkdir_p='$(mkinstalldirs)'
+ else
+ mkdir_p='$(install_sh) -d'
+ fi
+fi
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with
args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_AWK+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$AWK" && break
+done
+
+echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
+if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.make <<\_ACEOF
+all:
+ @echo 'ac_maketemp="$(MAKE)"'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftest.make
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+ SET_MAKE=
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+ test -f $srcdir/config.status; then
+ { { echo "$as_me:$LINENO: error: source directory already configured; run
\"make distclean\" there first" >&5
+echo "$as_me: error: source directory already configured; run \"make
distclean\" there first" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='xm-test'
+ VERSION='0.4.0'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'. However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program
name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+ test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ STRIP=$ac_ct_STRIP
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+
+# We need awk for the "check" target. The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
+
+AMTAR=${AMTAR-"${am_missing_run}tar"}
+
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+
+
+
+
+
+
+# Check for dependencies
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext
$LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program
name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program
name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ CC=$ac_ct_CC
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a
program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with
args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$ac_ct_CC" && break
+done
+
+ CC=$ac_ct_CC
+fi
+
+fi
+
+
+test -z "$CC" && { { echo "$as_me:$LINENO: error: no acceptable C compiler
found in \$PATH
+See \`config.log' for more details." >&5
+echo "$as_me: error: no acceptable C compiler found in \$PATH
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+
+# Provide some information about the compiler.
+echo "$as_me:$LINENO:" \
+ "checking for C compiler version" >&5
+ac_compiler=`set X $ac_compile; echo $2`
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
+ (eval $ac_compiler --version </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
+ (eval $ac_compiler -v </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
+ (eval $ac_compiler -V </dev/null >&5) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
+ (eval $ac_link_default) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # Find the output, starting from the most likely. This scheme is
+# not robust to junk in `.', hence go to wildcards (a.*) only as a last
+# resort.
+
+# Be careful to initialize this variable, since it used to be cached.
+# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
+ac_cv_exeext=
+# b.out is created by i960 compilers.
+for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o |
*.obj )
+ ;;
+ conftest.$ac_ext )
+ # This is the source file.
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ # FIXME: I believe we export ac_cv_exeext for Libtool,
+ # but it would be cool to find out if it's true. Does anybody
+ # maintain Libtool? --akim.
+ export ac_cv_exeext
+ break;;
+ * )
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: C compiler cannot create executables
+See \`config.log' for more details." >&5
+echo "$as_me: error: C compiler cannot create executables
+See \`config.log' for more details." >&2;}
+ { (exit 77); exit 77; }; }
+fi
+
+ac_exeext=$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6
+
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
+# If not cross compiling, check that we can run a simple program.
+if test "$cross_compiling" != yes; then
+ if { ac_try='./$ac_file'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { echo "$as_me:$LINENO: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ fi
+fi
+echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6
+
+rm -f a.out a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+# Check the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
+echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6
+
+echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o |
*.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ export ac_cv_exeext
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { echo "$as_me:$LINENO: error: cannot compute suffix of executables:
cannot compile and link
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of executables: cannot compile and
link
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest$ac_cv_exeext
+echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+if test "${ac_cv_objext+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; then
+ for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot
compile
+See \`config.log' for more details." >&5
+echo "$as_me: error: cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+if test "${ac_cv_c_compiler_gnu+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_compiler_gnu=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_compiler_gnu=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+GCC=`test $ac_compiler_gnu = yes && echo yes`
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+CFLAGS="-g"
+echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_g+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_g=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_prog_cc_g=no
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
+echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
+if test "${ac_cv_prog_cc_stdc+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_cv_prog_cc_stdc=no
+ac_save_CC=$CC
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std1 is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std1. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int,
int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+# Don't try gcc -ansi; that turns off useful extensions and
+# breaks some systems' header files.
+# AIX -qlanglvl=ansi
+# Ultrix and OSF/1 -std1
+# HP-UX 10.20 and later -Ae
+# HP-UX older versions -Aa -D_HPUX_SOURCE
+# SVR4 -Xc -D__EXTENSIONS__
+for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc
-D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_cc_stdc=$ac_arg
+break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext
+done
+rm -f conftest.$ac_ext conftest.$ac_objext
+CC=$ac_save_CC
+
+fi
+
+case "x$ac_cv_prog_cc_stdc" in
+ x|xno)
+ echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6 ;;
+ *)
+ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
+ CC="$CC $ac_cv_prog_cc_stdc" ;;
+esac
+
+# Some people use a C++ compiler to compile C. Since we use `exit',
+# in C++ we need to declare it. In case someone uses the same compiler
+# for both compiling C and C++ we need to have the C++ compiler decide
+# the declaration of exit, since it's the most demanding environment.
+cat >conftest.$ac_ext <<_ACEOF
+#ifndef __cplusplus
+ choke me
+#endif
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ for ac_declaration in \
+ '' \
+ 'extern "C" void std::exit (int) throw (); using std::exit;' \
+ 'extern "C" void std::exit (int); using std::exit;' \
+ 'extern "C" void exit (int) throw ();' \
+ 'extern "C" void exit (int);' \
+ 'void exit (int);'
+do
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+#include <stdlib.h>
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ :
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+continue
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+$ac_declaration
+int
+main ()
+{
+exit (42);
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
+ (eval $ac_compile) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest.$ac_objext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ break
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+done
+rm -f conftest*
+if test -n "$ac_declaration"; then
+ echo '#ifdef __cplusplus' >>confdefs.h
+ echo $ac_declaration >>confdefs.h
+ echo '#endif' >>confdefs.h
+fi
+
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext
$LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+DEPDIR="${am__leading_dot}deps"
+
+ ac_config_commands="$ac_config_commands depfiles"
+
+
+am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+ @echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" =
"done"; then
+ am__include=include
+ am__quote=
+ _am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+ echo '.include "confinc"' > confmf
+ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+ am__include=.include
+ am__quote="\""
+ _am_result=BSD
+ fi
+fi
+
+
+echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6
+rm -f confinc confmf
+
+# Check whether --enable-dependency-tracking or --disable-dependency-tracking
was given.
+if test "${enable_dependency_tracking+set}" = set; then
+ enableval="$enable_dependency_tracking"
+
+fi;
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+fi
+
+
+if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+
+depcc="$CC" am_compiler_list=
+
+echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ case $depmode in
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ none) break ;;
+ esac
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this.
+ if depmode=$depmode \
+ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+
+
+if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+#AC_PROG_INSTALL
+
+# Right now, we can assume that the lib/ and ramdisk/ directories
+# are two levels above the tests
+TESTLIB=../../lib
+RD_PATH=../../ramdisk
+TENV="PYTHONPATH=$PYTHONPATH:$TESTLIB:/usr/lib/python RD_PATH=$RD_PATH"
+
+# Check whether --enable-vmx-support or --disable-vmx-support was given.
+if test "${enable_vmx_support+set}" = set; then
+ enableval="$enable_vmx_support"
+
+ ENABLE_VMX=True
+
+else
+
+ ENABLE_VMX=False
+
+fi;
+
+
+
+
+
+
+for ac_prog in 'bison -y' byacc
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with
args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_YACC+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$YACC"; then
+ ac_cv_prog_YACC="$YACC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_YACC="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+YACC=$ac_cv_prog_YACC
+if test -n "$YACC"; then
+ echo "$as_me:$LINENO: result: $YACC" >&5
+echo "${ECHO_T}$YACC" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$YACC" && break
+done
+test -n "$YACC" || YACC="yacc"
+
+
+for ac_prog in flex lex
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with
args.
+set dummy $ac_prog; ac_word=$2
+echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+if test "${ac_cv_prog_LEX+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ if test -n "$LEX"; then
+ ac_cv_prog_LEX="$LEX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LEX="$ac_prog"
+ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+done
+
+fi
+fi
+LEX=$ac_cv_prog_LEX
+if test -n "$LEX"; then
+ echo "$as_me:$LINENO: result: $LEX" >&5
+echo "${ECHO_T}$LEX" >&6
+else
+ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6
+fi
+
+ test -n "$LEX" && break
+done
+test -n "$LEX" || LEX=":"
+
+if test -z "$LEXLIB"
+then
+ echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5
+echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6
+if test "${ac_cv_lib_fl_yywrap+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lfl $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap ();
+int
+main ()
+{
+yywrap ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_fl_yywrap=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_fl_yywrap=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5
+echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6
+if test $ac_cv_lib_fl_yywrap = yes; then
+ LEXLIB="-lfl"
+else
+ echo "$as_me:$LINENO: checking for yywrap in -ll" >&5
+echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6
+if test "${ac_cv_lib_l_yywrap+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ll $LIBS"
+cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h. */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h. */
+
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char yywrap ();
+int
+main ()
+{
+yywrap ();
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_lib_l_yywrap=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ac_cv_lib_l_yywrap=no
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5
+echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6
+if test $ac_cv_lib_l_yywrap = yes; then
+ LEXLIB="-ll"
+fi
+
+fi
+
+fi
+
+if test "x$LEX" != "x:"; then
+ echo "$as_me:$LINENO: checking lex output file root" >&5
+echo $ECHO_N "checking lex output file root... $ECHO_C" >&6
+if test "${ac_cv_prog_lex_root+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # The minimal lex program is just a single line: %%. But some broken lexes
+# (Solaris, I think it was) want two %% lines, so accommodate them.
+cat >conftest.l <<_ACEOF
+%%
+%%
+_ACEOF
+{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5
+ (eval $LEX conftest.l) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+if test -f lex.yy.c; then
+ ac_cv_prog_lex_root=lex.yy
+elif test -f lexyy.c; then
+ ac_cv_prog_lex_root=lexyy
+else
+ { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5
+echo "$as_me: error: cannot find output from $LEX; giving up" >&2;}
+ { (exit 1); exit 1; }; }
+fi
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5
+echo "${ECHO_T}$ac_cv_prog_lex_root" >&6
+rm -f conftest.l
+LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
+
+echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5
+echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6
+if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then
+ echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+ # POSIX says lex can declare yytext either as a pointer or an array; the
+# default is implementation-dependent. Figure out which it is, since
+# not all implementations provide the %pointer and %array declarations.
+ac_cv_prog_lex_yytext_pointer=no
+echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
+ac_save_LIBS=$LIBS
+LIBS="$LIBS $LEXLIB"
+cat >conftest.$ac_ext <<_ACEOF
+`cat $LEX_OUTPUT_ROOT.c`
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
+ (eval $ac_link) 2>conftest.er1
+ ac_status=$?
+ grep -v '^ *+' conftest.er1 >conftest.err
+ rm -f conftest.er1
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } &&
+ { ac_try='test -z "$ac_c_werror_flag"
+ || test ! -s conftest.err'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; } &&
+ { ac_try='test -s conftest$ac_exeext'
+ { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
+ (eval $ac_try) 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }; }; then
+ ac_cv_prog_lex_yytext_pointer=yes
+else
+ echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+fi
+rm -f conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_save_LIBS
+rm -f "${LEX_OUTPUT_ROOT}.c"
+
+fi
+echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5
+echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6
+if test $ac_cv_prog_lex_yytext_pointer = yes; then
+
+cat >>confdefs.h <<\_ACEOF
+#define YYTEXT_POINTER 1
+_ACEOF
+
+fi
+
+fi
+
+# basic build files
+
ac_config_files="$ac_config_files Makefile ramdisk/Makefile tests/Makefile
tests/block-list/Makefile tests/block-create/Makefile
tests/block-destroy/Makefile tests/console/Makefile tests/create/Makefile
tests/destroy/Makefile tests/dmesg/Makefile tests/domid/Makefile
tests/domname/Makefile tests/help/Makefile tests/info/Makefile
tests/list/Makefile tests/memmax/Makefile tests/memset/Makefile
tests/migrate/Makefile tests/pause/Makefile tests/reboot/Makefile
tests/restore/Makefile tests/save/Makefile tests/sedf/Makefile
tests/shutdown/Makefile tests/sysrq/Makefile tests/unpause/Makefile
tests/vcpu-pin/Makefile tests/vcpu-disable/Makefile
tests/enforce_dom0_cpus/Makefile lib/XmTestReport/xmtest.py
lib/XmTestLib/config.py"
+
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+{
+ (set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n \
+ "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+ ;;
+ esac;
+} |
+ sed '
+ t clear
+ : clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ : end' >>confcache
+if diff $cache_file confcache >/dev/null 2>&1; then :; else
+ if test -w $cache_file; then
+ test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+ cat confcache >$cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=/{
+s/:*\$(srcdir):*/:/;
+s/:*\${srcdir}:*/:/;
+s/:*@srcdir@:*/:/;
+s/^\([^=]*=[ ]*\):*/\1/;
+s/:*$//;
+s/^[^=]*=[ ]*$//;
+}'
+fi
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[
]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[
]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
+
+
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_i=`echo "$ac_i" |
+ sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
+ # 2. Add them.
+ ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
+ ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never
defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+ { (exit 1); exit 1; }; }
+fi
+
+: ${CONFIG_STATUS=./config.status}
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
+echo "$as_me: creating $CONFIG_STATUS" >&6;}
+cat >$CONFIG_STATUS <<_ACEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+## --------------------- ##
+## M4sh Initialization. ##
+## --------------------- ##
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
+ set -o posix
+fi
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Support unset when possible.
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ as_unset=unset
+else
+ as_unset=false
+fi
+
+
+# Work around bugs in pre-3.0 UWIN ksh.
+$as_unset ENV MAIL MAILPATH
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+for as_var in \
+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
+ LC_TELEPHONE LC_TIME
+do
+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
+ eval $as_var=C; export $as_var
+ else
+ $as_unset $as_var
+ fi
+done
+
+# Required to use basename.
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+
+# Name of the executable.
+as_me=`$as_basename "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)$' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
+ /^X\/\(\/\/\)$/{ s//\1/; q; }
+ /^X\/\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+
+
+# PATH needs CR, and LINENO needs CR and PATH.
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ echo "#! /bin/sh" >conf$$.sh
+ echo "exit 0" >>conf$$.sh
+ chmod +x conf$$.sh
+ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+ PATH_SEPARATOR=';'
+ else
+ PATH_SEPARATOR=:
+ fi
+ rm -f conf$$.sh
+fi
+
+
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" || {
+ # Find who we are. Look in the path if we contain no path at all
+ # relative or not.
+ case $0 in
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+
+ ;;
+ esac
+ # We did not find ourselves, most probably we were run as `sh COMMAND'
+ # in which case we are not to be found in the path.
+ if test "x$as_myself" = x; then
+ as_myself=$0
+ fi
+ if test ! -f "$as_myself"; then
+ { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an
absolute path" >&5
+echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
+ { (exit 1); exit 1; }; }
+ fi
+ case $CONFIG_SHELL in
+ '')
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for as_base in sh bash ksh sh5; do
+ case $as_dir in
+ /*)
+ if ("$as_dir/$as_base" -c '
+ as_lineno_1=$LINENO
+ as_lineno_2=$LINENO
+ as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
+ test "x$as_lineno_1" != "x$as_lineno_2" &&
+ test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then
+ $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || {
BASH_ENV=; export BASH_ENV; }
+ $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
+ CONFIG_SHELL=$as_dir/$as_base
+ export CONFIG_SHELL
+ exec "$CONFIG_SHELL" "$0" ${1+"$@"}
+ fi;;
+ esac
+ done
+done
+;;
+ esac
+
+ # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
+ # uniformly replaced by the line number. The first 'sed' inserts a
+ # line-number line before each line; the second 'sed' does the real
+ # work. The second script uses 'N' to pair each line-number line
+ # with the numbered line, and appends trailing '-' during
+ # substitution so that $LINENO is not a special case at line end.
+ # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
+ # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-)
+ sed '=' <$as_myself |
+ sed '
+ N
+ s,$,-,
+ : loop
+ s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+ t loop
+ s,-$,,
+ s,^['$as_cr_digits']*\n,,
+ ' >$as_me.lineno &&
+ chmod +x $as_me.lineno ||
+ { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a
POSIX shell" >&5
+echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell"
>&2;}
+ { (exit 1); exit 1; }; }
+
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensible to this).
+ . ./$as_me.lineno
+ # Exit status is that of the last command.
+ exit
+}
+
+
+case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
+ *c*,-n*) ECHO_N= ECHO_C='
+' ECHO_T=' ' ;;
+ *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;;
+ *) ECHO_N= ECHO_C='\c' ECHO_T= ;;
+esac
+
+if expr a : '\(a\)' >/dev/null 2>&1; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+rm -f conf$$ conf$$.exe conf$$.file
+echo >conf$$.file
+if ln -s conf$$.file conf$$ 2>/dev/null; then
+ # We could just check for DJGPP; but this test a) works b) is more generic
+ # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
+ if test -f conf$$.exe; then
+ # Don't use ln at all; we don't have any links
+ as_ln_s='cp -p'
+ else
+ as_ln_s='ln -s'
+ fi
+elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+else
+ as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.file
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p=:
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_executable_p="test -f"
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed
'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+# IFS
+# We need space, tab and new line, in precisely that order.
+as_nl='
+'
+IFS=" $as_nl"
+
+# CDPATH.
+$as_unset CDPATH
+
+exec 6>&1
+
+# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling. Logging --version etc. is OK.
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+} >&5
+cat >&5 <<_CSEOF
+
+This file was extended by xm-test $as_me 0.4.0, which was
+generated by GNU Autoconf 2.59. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+_CSEOF
+echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
+echo >&5
+_ACEOF
+
+# Files that config.status was made for.
+if test -n "$ac_config_files"; then
+ echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_headers"; then
+ echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_links"; then
+ echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
+fi
+
+if test -n "$ac_config_commands"; then
+ echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+ac_cs_usage="\
+\`$as_me' instantiates files from templates according to the
+current configuration.
+
+Usage: $0 [OPTIONS] [FILE]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <bug-autoconf@xxxxxxx>."
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+ac_cs_version="\\
+xm-test config.status 0.4.0
+configured by $0, generated by GNU Autoconf 2.59,
+ with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+
+Copyright (C) 2003 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+srcdir=$srcdir
+INSTALL="$INSTALL"
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If no file are specified by the user, then we need to provide default
+# value. By we need to know if files were specified by the user.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=*)
+ ac_option=`expr "x$1" : 'x\([^=]*\)='`
+ ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ -*)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ *) # This is not an option, so the user has probably given explicit
+ # arguments.
+ ac_option=$1
+ ac_need_defaults=false;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --vers* | -V )
+ echo "$ac_cs_version"; exit 0 ;;
+ --he | --h)
+ # Conflict between --help and --header
+ { { echo "$as_me:$LINENO: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; };;
+ --help | --hel | -h )
+ echo "$ac_cs_usage"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ CONFIG_FILES="$CONFIG_FILES $ac_optarg"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
+ ac_need_defaults=false;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&5
+echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2;}
+ { (exit 1); exit 1; }; } ;;
+
+ *) ac_config_targets="$ac_config_targets $1" ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+if \$ac_cs_recheck; then
+ echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args "
--no-create --no-recursion" >&6
+ exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create
--no-recursion
+fi
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+#
+# INIT-COMMANDS section.
+#
+
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+
+_ACEOF
+
+
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_config_target in $ac_config_targets
+do
+ case "$ac_config_target" in
+ # Handling of arguments.
+ "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "ramdisk/Makefile" ) CONFIG_FILES="$CONFIG_FILES ramdisk/Makefile" ;;
+ "tests/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+ "tests/block-list/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/block-list/Makefile" ;;
+ "tests/block-create/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/block-create/Makefile" ;;
+ "tests/block-destroy/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/block-destroy/Makefile" ;;
+ "tests/console/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/console/Makefile" ;;
+ "tests/create/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/create/Makefile"
;;
+ "tests/destroy/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/destroy/Makefile" ;;
+ "tests/dmesg/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/dmesg/Makefile" ;;
+ "tests/domid/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/domid/Makefile" ;;
+ "tests/domname/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/domname/Makefile" ;;
+ "tests/help/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/help/Makefile" ;;
+ "tests/info/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/info/Makefile" ;;
+ "tests/list/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/list/Makefile" ;;
+ "tests/memmax/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/memmax/Makefile"
;;
+ "tests/memset/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/memset/Makefile"
;;
+ "tests/migrate/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/migrate/Makefile" ;;
+ "tests/pause/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/pause/Makefile" ;;
+ "tests/reboot/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/reboot/Makefile"
;;
+ "tests/restore/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/restore/Makefile" ;;
+ "tests/save/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/save/Makefile" ;;
+ "tests/sedf/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/sedf/Makefile" ;;
+ "tests/shutdown/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/shutdown/Makefile" ;;
+ "tests/sysrq/Makefile" ) CONFIG_FILES="$CONFIG_FILES tests/sysrq/Makefile" ;;
+ "tests/unpause/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/unpause/Makefile" ;;
+ "tests/vcpu-pin/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/vcpu-pin/Makefile" ;;
+ "tests/vcpu-disable/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/vcpu-disable/Makefile" ;;
+ "tests/enforce_dom0_cpus/Makefile" ) CONFIG_FILES="$CONFIG_FILES
tests/enforce_dom0_cpus/Makefile" ;;
+ "lib/XmTestReport/xmtest.py" ) CONFIG_FILES="$CONFIG_FILES
lib/XmTestReport/xmtest.py" ;;
+ "lib/XmTestLib/config.py" ) CONFIG_FILES="$CONFIG_FILES
lib/XmTestLib/config.py" ;;
+ "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
+echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
+ { (exit 1); exit 1; }; };;
+ esac
+done
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason to put it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Create a temporary directory, and hook for its removal unless debugging.
+$debug ||
+{
+ trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+ trap '{ (exit 1); exit 1; }' 1 2 13 15
+}
+
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+ test -n "$tmp" && test -d "$tmp"
+} ||
+{
+ tmp=./confstat$$-$RANDOM
+ (umask 077 && mkdir $tmp)
+} ||
+{
+ echo "$me: cannot create a temporary directory in ." >&2
+ { (exit 1); exit 1; }
+}
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<_ACEOF
+
+#
+# CONFIG_FILES section.
+#
+
+# No need to generate the scripts if there are no CONFIG_FILES.
+# This happens for instance when ./config.status config.h
+if test -n "\$CONFIG_FILES"; then
+ # Protect against being on the right side of a sed subst in config.status.
+ sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
+ s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
+s,@SHELL@,$SHELL,;t t
+s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
+s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
+s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
+s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
+s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
+s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
+s,@exec_prefix@,$exec_prefix,;t t
+s,@prefix@,$prefix,;t t
+s,@program_transform_name@,$program_transform_name,;t t
+s,@bindir@,$bindir,;t t
+s,@sbindir@,$sbindir,;t t
+s,@libexecdir@,$libexecdir,;t t
+s,@datadir@,$datadir,;t t
+s,@sysconfdir@,$sysconfdir,;t t
+s,@sharedstatedir@,$sharedstatedir,;t t
+s,@localstatedir@,$localstatedir,;t t
+s,@libdir@,$libdir,;t t
+s,@includedir@,$includedir,;t t
+s,@oldincludedir@,$oldincludedir,;t t
+s,@infodir@,$infodir,;t t
+s,@mandir@,$mandir,;t t
+s,@build_alias@,$build_alias,;t t
+s,@host_alias@,$host_alias,;t t
+s,@target_alias@,$target_alias,;t t
+s,@DEFS@,$DEFS,;t t
+s,@ECHO_C@,$ECHO_C,;t t
+s,@ECHO_N@,$ECHO_N,;t t
+s,@ECHO_T@,$ECHO_T,;t t
+s,@LIBS@,$LIBS,;t t
+s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
+s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
+s,@INSTALL_DATA@,$INSTALL_DATA,;t t
+s,@CYGPATH_W@,$CYGPATH_W,;t t
+s,@PACKAGE@,$PACKAGE,;t t
+s,@VERSION@,$VERSION,;t t
+s,@ACLOCAL@,$ACLOCAL,;t t
+s,@AUTOCONF@,$AUTOCONF,;t t
+s,@AUTOMAKE@,$AUTOMAKE,;t t
+s,@AUTOHEADER@,$AUTOHEADER,;t t
+s,@MAKEINFO@,$MAKEINFO,;t t
+s,@install_sh@,$install_sh,;t t
+s,@STRIP@,$STRIP,;t t
+s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
+s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
+s,@mkdir_p@,$mkdir_p,;t t
+s,@AWK@,$AWK,;t t
+s,@SET_MAKE@,$SET_MAKE,;t t
+s,@am__leading_dot@,$am__leading_dot,;t t
+s,@AMTAR@,$AMTAR,;t t
+s,@am__tar@,$am__tar,;t t
+s,@am__untar@,$am__untar,;t t
+s,@CC@,$CC,;t t
+s,@CFLAGS@,$CFLAGS,;t t
+s,@LDFLAGS@,$LDFLAGS,;t t
+s,@CPPFLAGS@,$CPPFLAGS,;t t
+s,@ac_ct_CC@,$ac_ct_CC,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
+s,@DEPDIR@,$DEPDIR,;t t
+s,@am__include@,$am__include,;t t
+s,@am__quote@,$am__quote,;t t
+s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
+s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
+s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
+s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
+s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
+s,@ENABLE_VMX@,$ENABLE_VMX,;t t
+s,@TENV@,$TENV,;t t
+s,@YACC@,$YACC,;t t
+s,@LEX@,$LEX,;t t
+s,@LEXLIB@,$LEXLIB,;t t
+s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t
+s,@LIBOBJS@,$LIBOBJS,;t t
+s,@LTLIBOBJS@,$LTLIBOBJS,;t t
+CEOF
+
+_ACEOF
+
+ cat >>$CONFIG_STATUS <<\_ACEOF
+ # Split the substitutions into bite-sized pieces for seds with
+ # small command number limits, like on Digital OSF/1 and HP-UX.
+ ac_max_sed_lines=48
+ ac_sed_frag=1 # Number of current file.
+ ac_beg=1 # First line for current file.
+ ac_end=$ac_max_sed_lines # Line after last line for current file.
+ ac_more_lines=:
+ ac_sed_cmds=
+ while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ else
+ sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
+ fi
+ if test ! -s $tmp/subs.frag; then
+ ac_more_lines=false
+ else
+ # The purpose of the label and of the branching condition is to
+ # speed up the sed processing (if there are no `@' at all, there
+ # is no need to browse any of the substitutions).
+ # These are the two extra sed commands mentioned above.
+ (echo ':t
+ /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag)
>$tmp/subs-$ac_sed_frag.sed
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
+ fi
+ ac_sed_frag=`expr $ac_sed_frag + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_lines`
+ fi
+ done
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+ fi
+fi # test -n "$CONFIG_FILES"
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case $ac_file in
+ - | *:- | *:-:* ) # input from stdin
+ cat >$tmp/stdin
+ ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
+ * ) ac_file_in=$ac_file.in ;;
+ esac
+
+ # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
+ ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\""
>&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+ esac
+
+ if test x"$ac_file" != x-; then
+ { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+ rm -f "$ac_file"
+ fi
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ if test x"$ac_file" = x-; then
+ configure_input=
+ else
+ configure_input="$ac_file. "
+ fi
+ configure_input=$configure_input"Generated from `echo $ac_file_in |
+ sed 's,.*/,,'` by configure."
+
+ # First look for the input files in the build tree, otherwise in the
+ # src tree.
+ ac_file_inputs=`IFS=:
+ for f in $ac_file_in; do
+ case $f in
+ -) echo $tmp/stdin ;;
+ [\\/$]*)
+ # Absolute (can't be DOS-style, as IFS=:)
+ test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input
file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ echo "$f";;
+ *) # Relative
+ if test -f "$f"; then
+ # Build tree
+ echo "$f"
+ elif test -f "$srcdir/$f"; then
+ # Source tree
+ echo "$srcdir/$f"
+ else
+ # /dev/null tree
+ { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
+echo "$as_me: error: cannot find input file: $f" >&2;}
+ { (exit 1); exit 1; }; }
+ fi;;
+ esac
+ done` || { (exit 1); exit 1; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF
+ sed "$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s,@configure_input@,$configure_input,;t t
+s,@srcdir@,$ac_srcdir,;t t
+s,@abs_srcdir@,$ac_abs_srcdir,;t t
+s,@top_srcdir@,$ac_top_srcdir,;t t
+s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
+s,@builddir@,$ac_builddir,;t t
+s,@abs_builddir@,$ac_abs_builddir,;t t
+s,@top_builddir@,$ac_top_builddir,;t t
+s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
+s,@INSTALL@,$ac_INSTALL,;t t
+" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
+ rm -f $tmp/stdin
+ if test x"$ac_file" != x-; then
+ mv $tmp/out $ac_file
+ else
+ cat $tmp/out
+ rm -f $tmp/out
+ fi
+
+done
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+#
+# CONFIG_COMMANDS section.
+#
+for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
+ ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
+ ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
+ ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
+$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_dest" : 'X\(//\)[^/]' \| \
+ X"$ac_dest" : 'X\(//\)$' \| \
+ X"$ac_dest" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$ac_dest" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p "$ac_dir"
+ else
+ as_dir="$ac_dir"
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\""
>&5
+echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ ac_builddir=.
+
+if test "$ac_dir" != .; then
+ ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
+else
+ ac_dir_suffix= ac_top_builddir=
+fi
+
+case $srcdir in
+ .) # No --srcdir option. We are building in place.
+ ac_srcdir=.
+ if test -z "$ac_top_builddir"; then
+ ac_top_srcdir=.
+ else
+ ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
+ fi ;;
+ [\\/]* | ?:[\\/]* ) # Absolute path.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir ;;
+ *) # Relative path.
+ ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_builddir$srcdir ;;
+esac
+
+# Do not use `cd foo && pwd` to compute absolute paths, because
+# the directories may not exist.
+case `pwd` in
+.) ac_abs_builddir="$ac_dir";;
+*)
+ case "$ac_dir" in
+ .) ac_abs_builddir=`pwd`;;
+ [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
+ *) ac_abs_builddir=`pwd`/"$ac_dir";;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_builddir=${ac_top_builddir}.;;
+*)
+ case ${ac_top_builddir}. in
+ .) ac_abs_top_builddir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
+ *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_srcdir=$ac_srcdir;;
+*)
+ case $ac_srcdir in
+ .) ac_abs_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
+ *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
+ esac;;
+esac
+case $ac_abs_builddir in
+.) ac_abs_top_srcdir=$ac_top_srcdir;;
+*)
+ case $ac_top_srcdir in
+ .) ac_abs_top_srcdir=$ac_abs_builddir;;
+ [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
+ *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
+ esac;;
+esac
+
+
+ { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
+echo "$as_me: executing $ac_dest commands" >&6;}
+ case $ac_dest in
+ depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+ # Strip MF so we end up with the name of the file.
+ mf=`echo "$mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile or not.
+ # We used to match only the files named `Makefile.in', but
+ # some people rename them; so instead we look at the file content.
+ # Grep'ing the first line is not enough: some people post-process
+ # each Makefile.in and add a new line on top of each file to say so.
+ # So let's grep whole file.
+ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+ dirpart=`(dirname "$mf") 2>/dev/null ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$mf" : 'X\(//\)[^/]' \| \
+ X"$mf" : 'X\(//\)$' \| \
+ X"$mf" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ else
+ continue
+ fi
+ # Extract the definition of DEPDIR, am__include, and am__quote
+ # from the Makefile without running `make'.
+ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+ test -z "$DEPDIR" && continue
+ am__include=`sed -n 's/^am__include = //p' < "$mf"`
+ test -z "am__include" && continue
+ am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+ # When using ansi2knr, U may be empty or an underscore; expand it
+ U=`sed -n 's/^U = //p' < "$mf"`
+ # Find all dependency output files, they are included files with
+ # $(DEPDIR) in their names. We invoke sed twice because it is the
+ # simplest approach to changing $(DEPDIR) to its actual value in the
+ # expansion.
+ for file in `sed -n "
+ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+ # Make sure the directory exists.
+ test -f "$dirpart/$file" && continue
+ fdir=`(dirname "$file") 2>/dev/null ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$file" : 'X\(//\)[^/]' \| \
+ X"$file" : 'X\(//\)$' \| \
+ X"$file" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ { if $as_mkdir_p; then
+ mkdir -p $dirpart/$fdir
+ else
+ as_dir=$dirpart/$fdir
+ as_dirs=
+ while test ! -d "$as_dir"; do
+ as_dirs="$as_dir $as_dirs"
+ as_dir=`(dirname "$as_dir") 2>/dev/null ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| \
+ . : '\(.\)' 2>/dev/null ||
+echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
+ /^X\(\/\/\)[^/].*/{ s//\1/; q; }
+ /^X\(\/\/\)$/{ s//\1/; q; }
+ /^X\(\/\).*/{ s//\1/; q; }
+ s/.*/./; q'`
+ done
+ test ! -n "$as_dirs" || mkdir $as_dirs
+ fi || { { echo "$as_me:$LINENO: error: cannot create directory
$dirpart/$fdir" >&5
+echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+ { (exit 1); exit 1; }; }; }
+
+ # echo "creating $dirpart/$file"
+ echo '# dummy' > "$dirpart/$file"
+ done
+done
+ ;;
+ esac
+done
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF
+
+{ (exit 0); exit 0; }
+_ACEOF
+chmod +x $CONFIG_STATUS
+ac_clean_files=$ac_clean_files_save
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || { (exit 1); exit 1; }
+fi
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/configure.ac
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/configure.ac Mon Nov 7 11:53:38 2005
@@ -0,0 +1,69 @@
+# xm-test configure.ac input script
+
+# Basic header information
+AC_INIT([xm-test], [0.4.0])
+AM_INIT_AUTOMAKE([1.7 foreign])
+
+# Check for dependencies
+AC_PROG_CC
+#AC_PROG_INSTALL
+
+# Right now, we can assume that the lib/ and ramdisk/ directories
+# are two levels above the tests
+TESTLIB=../../lib
+RD_PATH=../../ramdisk
+TENV="PYTHONPATH=$PYTHONPATH:$TESTLIB:/usr/lib/python RD_PATH=$RD_PATH"
+
+AC_ARG_ENABLE(vmx-support,
+ [[ --enable-vmx-support use block devices instead of
ramdisks]],
+ [
+ ENABLE_VMX=True
+ ],[
+ ENABLE_VMX=False
+ ])
+
+AC_SUBST(ENABLE_VMX)
+
+AC_SUBST(TENV)
+AC_SUBST(PACKAGE_VERSION)
+
+AC_PROG_YACC
+AC_PROG_LEX
+
+# basic build files
+AC_CONFIG_FILES([
+ Makefile
+ ramdisk/Makefile
+ tests/Makefile
+ tests/block-list/Makefile
+ tests/block-create/Makefile
+ tests/block-destroy/Makefile
+ tests/console/Makefile
+ tests/create/Makefile
+ tests/destroy/Makefile
+ tests/dmesg/Makefile
+ tests/domid/Makefile
+ tests/domname/Makefile
+ tests/help/Makefile
+ tests/info/Makefile
+ tests/list/Makefile
+ tests/memmax/Makefile
+ tests/memset/Makefile
+ tests/migrate/Makefile
+ tests/pause/Makefile
+ tests/reboot/Makefile
+ tests/restore/Makefile
+ tests/save/Makefile
+ tests/sedf/Makefile
+ tests/shutdown/Makefile
+ tests/sysrq/Makefile
+ tests/unpause/Makefile
+ tests/vcpu-pin/Makefile
+ tests/vcpu-disable/Makefile
+ tests/enforce_dom0_cpus/Makefile
+ lib/XmTestReport/xmtest.py
+ lib/XmTestLib/config.py
+ ])
+
+
+AC_OUTPUT
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/install-sh
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/install-sh Mon Nov 7 11:53:38 2005
@@ -0,0 +1,323 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-02-02.21
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch. It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c (ignored)
+-d create directories instead of installing files.
+-g GROUP $chgrpprog installed files to GROUP.
+-m MODE $chmodprog installed files to MODE.
+-o USER $chownprog installed files to USER.
+-s $stripprog installed files.
+-t DIRECTORY install into DIRECTORY.
+-T report an error if DSTFILE is a directory.
+--help display this help and exit.
+--version display version info and exit.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+ case $1 in
+ -c) shift
+ continue;;
+
+ -d) dir_arg=true
+ shift
+ continue;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift
+ shift
+ continue;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) chmodcmd="$chmodprog $2"
+ shift
+ shift
+ continue;;
+
+ -o) chowncmd="$chownprog $2"
+ shift
+ shift
+ continue;;
+
+ -s) stripcmd=$stripprog
+ shift
+ continue;;
+
+ -t) dstarg=$2
+ shift
+ shift
+ continue;;
+
+ -T) no_target_directory=true
+ shift
+ continue;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ *) # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ test -n "$dir_arg$dstarg" && break
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dstarg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dstarg"
+ shift # fnord
+ fi
+ shift # arg
+ dstarg=$arg
+ done
+ break;;
+ esac
+done
+
+if test -z "$1"; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call `install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+for src
+do
+ # Protect names starting with `-'.
+ case $src in
+ -*) src=./$src ;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ src=
+
+ if test -d "$dst"; then
+ mkdircmd=:
+ chmodcmd=
+ else
+ mkdircmd=$mkdirprog
+ fi
+ else
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dstarg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+
+ dst=$dstarg
+ # Protect names starting with `-'.
+ case $dst in
+ -*) dst=./$dst ;;
+ esac
+
+ # If destination is a directory, append the input filename; won't work
+ # if double slashes aren't ignored.
+ if test -d "$dst"; then
+ if test -n "$no_target_directory"; then
+ echo "$0: $dstarg: Is a directory" >&2
+ exit 1
+ fi
+ dst=$dst/`basename "$src"`
+ fi
+ fi
+
+ # This sed command emulates the dirname command.
+ dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+ # Make sure that the destination directory exists.
+
+ # Skip lots of stat calls in the usual case.
+ if test ! -d "$dstdir"; then
+ defaultIFS='
+ '
+ IFS="${IFS-$defaultIFS}"
+
+ oIFS=$IFS
+ # Some sh's can't handle IFS=/ for some reason.
+ IFS='%'
+ set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+ shift
+ IFS=$oIFS
+
+ pathcomp=
+
+ while test $# -ne 0 ; do
+ pathcomp=$pathcomp$1
+ shift
+ if test ! -d "$pathcomp"; then
+ $mkdirprog "$pathcomp"
+ # mkdir can fail with a `File exist' error in case several
+ # install-sh are creating the directory concurrently. This
+ # is OK.
+ test -d "$pathcomp" || exit
+ fi
+ pathcomp=$pathcomp/
+ done
+ fi
+
+ if test -n "$dir_arg"; then
+ $doit $mkdircmd "$dst" \
+ && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+ else
+ dstfile=`basename "$dst"`
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=$dstdir/_inst.$$_
+ rmtmp=$dstdir/_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+ trap '(exit $?); exit' 1 2 13 15
+
+ # Copy the file name to the temp name.
+ $doit $cpprog "$src" "$dsttmp" &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+ && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+ && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+ && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+ # Now rename the file to the real destination.
+ { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+ || {
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ if test -f "$dstdir/$dstfile"; then
+ $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+ || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+ || {
+ echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+ (exit 1); exit 1
+ }
+ else
+ :
+ fi
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+ }
+ }
+ fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+ (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/Console.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/Console.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,278 @@
+#!/usr/bin/python
+"""
+ XmConsole.py - Interact with a xen console, getting return codes and
+ output from commands executed there.
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ NB: This requires the domU's prompt to be set to
+ a _very_ specific value, set in the PROMPT
+ variable of this script
+"""
+import sys;
+import os;
+import pty;
+import tty;
+import termios;
+import fcntl;
+import select;
+
+from Test import *
+
+class ConsoleError(Exception):
+ def __init__(self, msg):
+ self.errMsg = msg
+
+ def __str__(self):
+ return str(self.errMsg)
+
+class XmConsole:
+
+ def __init__(self, domain, historyLimit=256, historySaveAll=True,
historySaveCmds=False):
+ """
+ Parameters:
+ historyLimit: specifies how many lines of history are maintained
+ historySaveAll: determines whether or not extra messages in
+ between commands are saved
+ historySaveCmds : determines whether or not the command echos
+ are included in the history buffer
+ """
+
+ self.TIMEOUT = 30;
+ self.PROMPT = "@%@%> ";
+ self.domain = domain;
+ self.historyBuffer = [];
+ self.historyLines = 0;
+ self.historyLimit = historyLimit;
+ self.historySaveAll = historySaveAll;
+ self.historySaveCmds = historySaveCmds;
+ self.debugMe = False;
+ self.limit = None
+
+ consoleCmd = ["/usr/sbin/xm", "xm", "console", domain]
+
+ if verbose:
+ print "Console executing: " + str(consoleCmd)
+
+ pid, fd = pty.fork();
+
+ if pid == 0:
+ os.execvp("/usr/sbin/xm", consoleCmd[1:]);
+
+ self.consolePid = pid;
+ self.consoleFd = fd;
+
+ tty.setraw(self.consoleFd, termios.TCSANOW);
+
+ bytes = self.__chewall(self.consoleFd)
+ if bytes < 0:
+ raise ConsoleError("Console didn't respond")
+
+ def __addToHistory(self, line):
+ if self.debugMe:
+ print ">" + line
+ self.historyBuffer.append(line);
+ self.historyLines += 1;
+ if self.historyLines > self.historyLimit:
+ self.historyBuffer = self.historyBuffer[1:];
+ self.historyLines -= 1;
+
+
+ def clearHistory(self):
+ """Clear the history buffer"""
+ self.historyBuffer = [];
+ self.historyLines = 0;
+
+
+ def getHistory(self):
+ """Returns a string containing the entire history buffer"""
+ output = "";
+
+ for line in self.historyBuffer:
+ output += line + "\n";
+
+ return output;
+
+
+ def setTimeout(self, timeout):
+ """Sets the timeout used to determine if a remote command
+ has blocked"""
+ self.TIMEOUT = timeout;
+
+
+ def setPrompt(self, prompt):
+ """Sets the string key used to delimit the end of command
+ output"""
+ self.PROMPT = prompt;
+
+
+ def __chewall(self, fd):
+ timeout = 0;
+ bytes = 0;
+
+ while timeout < 3:
+ i, o, e = select.select([fd], [], [], 1);
+ if fd in i:
+ try:
+ foo = os.read(fd, 1)
+ if self.debugMe:
+ sys.stdout.write(foo)
+ bytes += 1
+ except:
+ timeout += 1
+
+ else:
+ timeout += 1
+
+ if self.limit and bytes >= self.limit:
+ raise ConsoleError("Console run-away (exceeded %i bytes)"
+ % self.limit)
+
+ if self.debugMe:
+ print "Ignored %i bytes of miscellaneous console output" % bytes
+
+ return bytes;
+
+
+ def __runCmd(self, command, saveHistory=True):
+ output = ""
+ line = ""
+ lines = 0
+ bytes = 0
+
+ self.__chewall(self.consoleFd);
+
+ if verbose:
+ print "[%s] Sending `%s'" % (self.domain, command)
+
+ os.write(self.consoleFd, "%s\n" % command);
+
+ while 1==1:
+ i, o, e = select.select([self.consoleFd], [], [], self.TIMEOUT);
+
+ if self.consoleFd in i:
+ try:
+ str = os.read(self.consoleFd, 1)
+ bytes += 1
+ except:
+ raise ConsoleError("Failed to read from console (fd=%i)"
+ % self.consoleFd)
+ else:
+ raise ConsoleError("Timed out waiting for console")
+
+ if self.limit and bytes >= self.limit:
+ raise ConsoleError("Console run-away (exceeded %i bytes)"
+ % self.limit)
+
+ if str == "\n":
+ if self.debugMe:
+ print "%s\n" % line
+ if lines > 0:
+ output += line + "\n"
+ if saveHistory:
+ self.__addToHistory(line);
+ elif self.historySaveCmds and saveHistory:
+ self.__addToHistory("*" + line);
+ lines += 1;
+ line = "";
+ elif str == "\r":
+ pass # ignore \r's
+ else:
+ line += str;
+
+ if line == self.PROMPT:
+ break;
+
+ return output;
+
+
+ def runCmd(self, command):
+ """Runs a command on the remote terminal and returns the output
+ as well as the return code. For example:
+
+ ret = c.runCmd("ls");
+ print ret["output"];
+ sys.exit(run["return"]);
+
+ """
+
+ # Allow exceptions to bubble up
+ realOutput = self.__runCmd(command);
+ retOutput = self.__runCmd("echo $?", saveHistory=False);
+
+ try:
+ retCode = int(retOutput);
+ except:
+ retCode = 255;
+ return {
+ "output": realOutput,
+ "return": retCode,
+ };
+
+ def sendInput(self, input):
+ """Sends input to the remote terminal, but doesn't check
+ for a return code"""
+ realOutput = self.__runCmd(input);
+ return {
+ "output": realOutput,
+ "return": 0,
+ };
+
+ def closeConsole(self):
+ """Closes the console connection and ensures that the console
+ process is killed"""
+ os.close(self.consoleFd);
+ os.kill(self.consolePid, 2);
+
+
+ def setLimit(self, limit):
+ """Sets a limit on the number of bytes that can be
+ read in an attempt to run a command. We need this when
+ running something that can run away"""
+ try:
+ self.limit = int(limit)
+ except Exception, e:
+ self.limit = None
+
+
+if __name__ == "__main__":
+ """This is both an example of using the XmConsole class, as
+ well as a utility for command-line execution of single commands
+ on a domU console. Prints output to stdout. Exits with the same
+ code as the domU command.
+ """
+
+ verbose = True;
+
+ try:
+ t = XmConsole(sys.argv[1]);
+ except ConsoleError, e:
+ print "Failed to attach to console (%s)" % str(e)
+ sys.exit(255)
+
+ try:
+ run = t.runCmd(sys.argv[2]);
+ except ConsoleError, e:
+ print "Console failed (%)" % str(e)
+ sys.exit(255)
+
+ t.closeConsole();
+
+ print run["output"],;
+ sys.exit(run["return"]);
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/Test.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/Test.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,169 @@
+#!/usr/bin/python
+
+"""
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+##
+## These are utility functions for test cases
+##
+
+import sys
+import commands
+import os
+import pwd
+import time
+import pty
+import select
+import signal
+import re
+
+TEST_PASS = 0
+TEST_FAIL = 255
+TEST_SKIP = 77
+
+# We currently advise waiting this many seconds for the ramdisk to
+# boot inside a domU
+TEST_DOMU_BOOT_DELAY = 20
+
+if os.environ.get("TEST_VERBOSE"):
+ verbose = True
+else:
+ verbose = False
+
+class TimeoutError(Exception):
+ def __init__(self, msg, outputSoFar):
+ self.msg = msg
+ self.output = outputSoFar
+
+ def __str__(self):
+ return str(self.msg)
+
+def runWithTimeout(cmd, timeout):
+ args = cmd.split()
+
+ pid, fd = pty.fork();
+
+ startTime = time.time()
+
+ if pid == 0:
+ os.execvp(args[0], args)
+
+ output = ""
+
+ while time.time() - startTime < timeout:
+ i, o, e = select.select([fd], [], [], timeout)
+
+ if fd in i:
+ try:
+ str = os.read(fd, 1)
+ output += str
+ except OSError, e:
+ exitPid, status = os.waitpid(pid, os.WNOHANG)
+
+ if exitPid == pid:
+ if verbose:
+ print "Child exited with %i" % status
+ return status, output
+
+ if verbose:
+ print "Command timed out: killing pid %i" % pid
+
+ os.kill(pid, signal.SIGINT)
+ raise TimeoutError("Command execution time exceeded %i seconds" % timeout,
+ outputSoFar=output)
+
+def traceCommand(command, timeout=None, logOutput=True):
+ if verbose:
+ print "[dom0] Running `%s'" % command
+
+ if timeout:
+ status, output = runWithTimeout(command, timeout)
+ else:
+ status, output = commands.getstatusoutput(command)
+
+ if logOutput and verbose:
+ print output
+
+ return status, output
+
+def getTestName():
+ script = sys.argv[0]
+ fname = os.path.basename(script)
+ match = re.match("([^\.]+)\.[a-z]+", fname)
+ if match:
+ tname = match.group(1)
+ else:
+ tname = "UNKNOWN"
+
+ return tname
+
+def becomeNonRoot():
+ """Become a non-root user, or FAIL if this is not possible. This call
+ succeeds if we are already running as a non-root user.
+ """
+
+ if os.geteuid() == 0:
+ # Try and become "nobody". This user is commonly in place, but this
+ # could be extended to consider any number of users to be acceptable,
+ # if there are systems where "nobody" is not present.
+ allusers = pwd.getpwall()
+ for u in allusers:
+ if u[0] == "nobody":
+ os.seteuid(u[2])
+ break
+ if os.geteuid() == 0:
+ FAIL("Could not become a non-root user")
+
+def FAIL(reason):
+ print "REASON: %s" % reason
+ sys.exit(TEST_FAIL)
+
+def SKIP(reason):
+ print "REASON: %s" % reason
+ sys.exit(TEST_SKIP)
+
+def saveLog(logText, filename=None):
+ if not filename:
+ filename = "log";
+ logfile = open(filename, 'w');
+ date = commands.getoutput("date");
+ logfile.write("-- BEGIN XmTest Log @" + date + "\n");
+ logfile.write(logText);
+ logfile.write("\n-- END XmTest Log\n");
+ logfile.close();
+
+def waitForBoot():
+ if verbose:
+ print "[dom0] Waiting %i seconds for domU boot..." %
TEST_DOMU_BOOT_DELAY
+ time.sleep(TEST_DOMU_BOOT_DELAY)
+
+def timeStamp():
+ name = getTestName()
+
+ t = time.asctime(time.localtime())
+
+ print "*** Test %s started at %s %s" % (name, t,
+ time.tzname[time.daylight])
+
+if __name__ == "__main__":
+
+ timeStamp()
+
+ FAIL("foo")
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/XenDomain.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/XenDomain.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,246 @@
+#!/usr/bin/python
+"""
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+import sys
+import commands
+import os
+import re
+import time
+import random
+
+from Xm import *
+from Test import *
+from config import *
+
+BLOCK_ROOT_DEV = "hdd1"
+
+def getDefaultKernel():
+ dom0Ver = commands.getoutput("uname -r");
+ domUVer = dom0Ver.replace("xen0", "xenU");
+
+ return "/boot/vmlinuz-" + domUVer;
+
+
+class DomainError(Exception):
+ def __init__(self, msg, extra="", errorcode=0):
+ self.msg = msg
+ self.extra = extra
+ try:
+ self.errorcode = int(errorcode)
+ except Exception, e:
+ self.errorcode = -1
+
+ def __str__(self):
+ return str(self.msg)
+
+class XenDomain:
+
+ def __init__(self, opts={}, config="/dev/null"):
+ """Create a domain object. Optionally take a
+ dictionary of 'xm' options to use"""
+
+ self.domID = None;
+ self.config = config
+
+ if not opts.has_key("name"):
+ raise DomainError("Missing `name' option")
+ if not opts.has_key("memory"):
+ raise DomainError("Missing `memory' option")
+ if not opts.has_key("kernel"):
+ raise DomainError("Missing `kernel' option")
+
+ self.opts = opts
+
+ self.configVals = None
+
+ def __buildCmdLine(self):
+ c = "xm create %s" % self.config
+
+ for k in self.opts.keys():
+ c += " %s=%s" % (k, self.opts[k])
+
+ return c
+
+ def start(self):
+
+ if self.configVals:
+ self.__writeConfig("/tmp/xm-test.conf")
+ self.config = "/tmp/xm-test.conf"
+
+ commandLine = self.__buildCmdLine()
+
+ ret, output = traceCommand(commandLine);
+
+ try:
+ self.domID = int(domid(self.domName));
+ except:
+ self.domID = -1;
+
+ if ret != 0:
+ raise DomainError("Failed to create domain",
+ extra=output,
+ errorcode=ret)
+
+ def stop(self):
+ prog = "xm";
+ cmd = " shutdown ";
+
+ ret, output = traceCommand(prog + cmd + self.opts["name"]);
+
+ return ret;
+
+ def destroy(self):
+ prog = "xm";
+ cmd = " destroy ";
+
+ ret, output = traceCommand(prog + cmd + self.opts["name"]);
+
+ return ret;
+
+ def getName(self):
+ return self.opts["name"];
+
+ def getId(self):
+ return domid(self.getName());
+
+ def configSetVar(self, key, value):
+ if not self.configVals:
+ self.configVals = {}
+
+ self.configVals[key] = value
+
+ def configAddDisk(self, pdev, vdev, acc):
+ if not self.configVals:
+ self.configVals = {}
+
+ if not self.configVals.has_key("disk"):
+ self.configVals["disk"] = []
+
+ self.configVals["disk"].append("%s,%s,%s" % (pdev,vdev,acc))
+
+ def __writeConfig(self, configFileName):
+
+ conf = file(configFileName, "w")
+
+ for k,v in self.configVals.items():
+ print >>conf, "%s = %s" % (k, v)
+
+ conf.close()
+
+
+class XmTestDomain(XenDomain):
+
+ def __getUniqueName(self):
+ #
+ # We avoid multiple duplicate names
+ # here because they stick around in xend
+ # too long
+ #
+ unixtime = int(time.time())
+ test_name = sys.argv[0]
+ test_name = re.sub("\.test", "", test_name)
+ test_name = re.sub("[\/\.]", "", test_name)
+ name = "%s-%i" % (test_name, unixtime)
+
+ return name
+
+ def __randomize(self):
+ # Random amount of memory between min and free_memory/2
+ freeMem = int(getInfo("free_memory"))
+ self.defaults["memory"] = random.randint(self.minSafeMem(),
+ freeMem/2)
+
+ self.defaults["vcpus"] = random.randint(1, 16)
+
+ self.defaults["nics"] = random.randint(0, 8)
+
+ if verbose:
+ print "*** Defaults after randomization:"
+ for k in self.defaults.keys():
+ print "*** %10s : %s" % (k, self.defaults[k])
+
+ def __prepareBlockRoot(self, rdpath):
+ image = os.path.abspath(rdpath + "/initrd.img")
+ self.configAddDisk("file:%s" % image, BLOCK_ROOT_DEV, "w")
+ self.defaults["root"] = "/dev/%s" % BLOCK_ROOT_DEV
+ del self.defaults["ramdisk"]
+
+ def __init__(self, name=None, extraOpts=None, config="/dev/null",
+ random=False):
+
+ rdpath = os.environ.get("RD_PATH")
+ if not rdpath:
+ rdpath = "../../ramdisk"
+
+ self.opts = {}
+ self.configVals = None
+
+ # Defaults
+ self.defaults = {"memory" : 64,
+ "vcpus" : 1,
+ "nics" : 0,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "name" : name or self.__getUniqueName(),
+ "ramdisk" : rdpath + "/initrd.img"
+ }
+
+ self.domID = None;
+ self.config = config;
+
+ if random:
+ self.__randomize()
+
+ if USE_BLKDEV_FOR_ROOT:
+ self.__prepareBlockRoot(rdpath)
+
+ # Copy over defaults
+ for key in self.defaults.keys():
+ self.opts[key] = self.defaults[key]
+
+ # Merge in extra options
+ if extraOpts:
+ for key in extraOpts.keys():
+ self.opts[key] = extraOpts[key]
+
+ def start(self):
+ """We know how about how long everyone will need to wait
+ for our ramdisk to come up, so we do it here as a convenience"""
+
+# for i in range(0,5):
+# status, output = traceCommand("xm list")
+
+ XenDomain.start(self)
+ waitForBoot()
+
+ def startNow(self):
+ XenDomain.start(self)
+
+ def getMem(self):
+ return int(self.opts["memory"])
+
+ def minSafeMem(self):
+ return 16
+
+if __name__ == "__main__":
+
+ d = XmTestDomain();
+
+ d.start();
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/Xm.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/Xm.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,252 @@
+#!/usr/bin/python
+
+"""
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+"""
+
+
+##
+## These are miscellaneous utility functions that query xm
+##
+
+import commands
+import re
+import os
+import time
+
+from Test import *;
+
+class XmError(Exception):
+ def __init__(self, msg, trace="", status=0):
+ self.msg = msg
+ self.trace = trace
+ try:
+ self.status = int(status)
+ except Exception, e:
+ self.status = -1
+
+ def __str__(self):
+ return trace
+
+def domid(name):
+ status, output = traceCommand("xm domid " + name);
+
+ if re.search("Traceback", output):
+ print "*** xm domid failed with:"
+ print output
+ for i in range(0,10):
+ status, output = traceCommand("xm list")
+ status, output = traceCommand("xm domid " + name);
+ if not re.search("Traceback", output):
+ break
+
+ try:
+ id = int(output);
+ except:
+ id = -1;
+ return id;
+
+def domname(id):
+ status, output = traceCommand("xm domname " + str(id));
+ return output;
+
+def isDomainRunning(domain):
+ id = domid(domain);
+ if id == -1:
+ return False;
+ else:
+ return True;
+
+def getRunningDomains():
+ status, output = traceCommand("xm list");
+ if "Traceback" in output:
+ raise XmError("xm failed", trace=output, status=status)
+
+ lines = output.splitlines();
+ domains = [];
+ for l in lines[1:]:
+ elms = l.split(" ", 1);
+ domains.append(elms[0]);
+ return domains;
+
+def destroyDomU(name):
+ status, output = traceCommand("xm destroy " + name, logOutput=False);
+ return status;
+
+def destroyAllDomUs():
+ if verbose:
+ print "*** Cleaning all running domU's"
+
+ attempt = 0
+ trying = True
+
+ while trying:
+ try:
+ attempt += 1
+ domainList = getRunningDomains()
+ trying = False
+ except XmError, e:
+ if attempt >= 10:
+ FAIL("XM-TEST: xm list not responding")
+ time.sleep(1)
+ print e.trace
+ print "!!! Trying again to get a clean domain list..."
+
+ for d in domainList:
+ if not d == "Domain-0":
+ destroyDomU(d);
+
+ if verbose:
+ print "*** Finished cleaning domUs"
+
+def getDomMem(domain):
+ status, output = traceCommand("xm list")
+ if status != 0:
+ if verbose:
+ print "xm list failed with %i" % status
+ return None
+
+ lines = re.split("\n", output)
+ for line in lines:
+ fields = re.sub(" +", " ", line).split()
+ if domain.isdigit():
+ if fields[1] == domain:
+ return int(fields[2])
+ else:
+ if fields[0] == domain:
+ return int(fields[2])
+ if verbose:
+ print "Did not find domain " + str(domain)
+ return None
+
+def getDomInfo(domain, key, opts=None):
+ if opts:
+ cmd = "xm list %s" % opts
+ else:
+ cmd = "xm list"
+
+ status, output = traceCommand(cmd)
+
+ if status != 0:
+ if verbose:
+ print "xm list failed with %i" % status
+ return None
+
+ lines = output.split("\n")
+
+ # Get the key values from the first line headers
+ cleanHeader = re.sub("\([^\)]+\)", "", lines[0])
+ colHeaders = re.split(" +", cleanHeader)
+
+ doms = {}
+
+ for line in lines[1:]:
+ domValues = {}
+ values = re.split(" +", line)
+ i = 1
+ for value in values[1:]:
+ domValues[colHeaders[i]] = value
+ i += 1
+ doms[values[0]] = domValues
+
+
+ if doms.has_key(domain) and doms[domain].has_key(key):
+ return doms[domain].get(key)
+
+ return ""
+
+def getVcpuInfo(domain):
+
+ status, output = traceCommand("xm vcpu-list %s" % domain)
+
+ lines = output.split("\n")
+
+ vcpus = {}
+
+ for line in lines[1:]:
+ cols = re.split(" +", line)
+ if cols[3] == '-':
+ vcpus[int(cols[2])] = None
+ else:
+ vcpus[int(cols[2])] = int(cols[3])
+
+ return vcpus
+
+def getInfo(key):
+
+ info = {}
+
+ status, output = traceCommand("xm info")
+ lines = output.split("\n")
+ for line in lines:
+ match = re.match("^([A-z_]+)[^:]*: (.*)$", line)
+ if match:
+ info[match.group(1)] = match.group(2)
+
+ if info.has_key(key):
+ return info[key]
+ else:
+ return ""
+
+def restartXend():
+ if verbose:
+ print "*** Restarting xend ..."
+
+ if os.access("/etc/init.d/xend", os.X_OK):
+ status, output = traceCommand("/etc/init.d/xend stop")
+ time.sleep(1)
+ status, output = traceCommand("/etc/init.d/xend start")
+
+ return status
+
+ else:
+ status, output = traceCommand("xend stop")
+ time.sleep(1)
+ status, output = traceCommand("xend start")
+
+ return status
+
+def smpConcurrencyLevel():
+ cores = int(getInfo("cores_per_socket"))
+ threads = int(getInfo("threads_per_core"))
+ sockets = int(getInfo("sockets_per_node"))
+
+ return cores * sockets * threads
+
+if __name__ == "__main__":
+ if isDomainRunning("0"):
+ print "Domain-0 is running; I must be working!"
+ else:
+ print "Domain-0 is not running; I may be broken!"
+
+ mem = getDomMem("Domain-0")
+ if not mem:
+ print "Failed to get memory for Domain-0!"
+ else:
+ print "Domain-0 mem: %i" % mem
+
+ cpu = getDomInfo("Domain-0", "CPU")
+ state = getDomInfo("Domain-0", "State")
+
+ print "Domain-0 CPU: " + cpu
+ print "Domain-0 state: " + state
+
+ v = getVcpuInfo("Domain-0")
+ for key in v.keys():
+ print "VCPU%i is on CPU %i" % (key, v[key])
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/__init__.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/__init__.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,22 @@
+#
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+#
+
+from Console import *
+from Test import *
+from Xm import *
+from XenDomain import *
+from config import *
+
+# Give this test a clean slate
+destroyAllDomUs();
+
+if os.environ.get("TEST_VERBOSE"):
+ verbose = True
+else:
+ verbose = False
+
+
+if verbose:
+ timeStamp()
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/config.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/config.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,4 @@
+#!/usr/bin/python
+
+USE_BLKDEV_FOR_ROOT = False
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestLib/config.py.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestLib/config.py.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,4 @@
+#!/usr/bin/python
+
+USE_BLKDEV_FOR_ROOT = @ENABLE_VMX@
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestReport/OSReport.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/OSReport.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,250 @@
+#!/usr/bin/python
+
+"""
+ OSReport.py - Handles the gathering and xml-formatting of operating
+ system environment information.
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+import utils
+
+import posix
+import re
+import os
+import commands
+import sys
+
+class Machine:
+
+ def __parseInfoLine(self, line):
+ if ":" in line:
+ name, value = line.split(":", 1)
+ name = name.strip()
+ value = value.strip()
+
+ name = re.sub(" ", "_", name)
+
+ return name, value
+ else:
+ return None, None
+
+ def __getCpuInfo(self, values):
+
+ processors = 0
+ cpuinfo = file("/proc/cpuinfo")
+
+ if not cpuinfo:
+ return "Unable to read /proc/cpuinfo"
+
+ lines = cpuinfo.readlines()
+
+ for l in lines:
+ name, value = self.__parseInfoLine(l)
+
+ if name in values.keys():
+ values[name] = value
+
+ if name == "processor":
+ processors += 1
+
+ values["dom0procs"] = str(processors)
+
+ return values
+
+ def __getXenInfo(self, values):
+
+ status, output = commands.getstatusoutput("xm info")
+ if status != 0:
+ self.errors += 1
+ return values
+
+ lines = output.split("\n")
+
+ for l in lines:
+ name, value = self.__parseInfoLine(l)
+
+ if name in values.keys():
+ values[name] = value
+
+ return values
+
+ def __init__(self):
+
+ self.values = {}
+ self.errors = 0
+
+ cpuValues = {"model_name" : "Unknown",
+ "flags" : "Unknown"}
+ xenValues = {"nr_cpus" : "Unknown",
+ "nr_nodes" : "Unknown",
+ "sockets_per_node" : "Unknown",
+ "cores_per_socket" : "Unknown",
+ "threads_per_core" : "Unknown",
+ "cpu_mhz" : "Unknown",
+ "memory" : "Unknown"}
+
+ xen = self.__getXenInfo(xenValues)
+ cpu = self.__getCpuInfo(cpuValues)
+
+ for k in xen.keys():
+ self.values[k] = xen[k]
+ if xen[k] == "Unknown":
+ self.errors += 1
+
+ for k in cpu.keys():
+ self.values[k] = cpu[k]
+ if cpu[k] == "Unknown":
+ self.errors += 1
+
+
+ def __str__(self):
+ string = "<machine>\n"
+
+ for k in self.values.keys():
+ string += " " + utils.tagify(k, self.values[k]) + "\n"
+
+ string += "</machine>\n"
+
+ return string
+
+class OperatingSystem:
+
+ def __redhatStyleRelease(self):
+ rFile = None
+
+ if os.access("/etc/redhat-release", os.R_OK):
+ rFile = file("/etc/redhat-release")
+ if os.access("/etc/SuSe-release", os.R_OK):
+ rFile = file("/etc/SuSe-release")
+ if os.access("/etc/SuSE-release", os.R_OK):
+ rFile = file("/etc/SuSE-release")
+ if os.access("/etc/mandrake-release", os.R_OK):
+ rFile = file("/etc/mandrake-release")
+
+ if not rFile:
+ return None, None
+
+ rLine = rFile.readline()
+ rFile.close()
+
+ match = re.match("^([^0-9]+)([0-9\.]+).*$", rLine)
+ if match:
+ return match.group(1), match.group(2)
+ else:
+ return None, None
+
+ def __debianStyleRelease(self):
+ if os.access("/etc/debian_version", os.R_OK):
+ rFile = file("/etc/debian_version")
+ else:
+ rFile = None
+
+ if not rFile:
+ return None, None
+
+ line = rFile.readline()
+ return "Debian", line.rstrip("\n");
+
+ def __lsbStyleRelease(self):
+ if os.access("/etc/lsb-release", os.R_OK):
+ rFile = file("/etc/lsb-release")
+ else:
+ rFile = None
+
+ if not rFile:
+ return None, None
+
+ lines = rFile.readlines()
+
+ vendor = None
+ version = None
+
+ for l in lines:
+ match = re.match("^DISTRIB_ID=(.*)$", l)
+ if match:
+ vendor = match.group(1)
+ match = re.match("^DISTRIB_RELEASE=(.*)$", l)
+ if match:
+ version = match.group(1)
+
+ return vendor, version
+
+ def __init__(self):
+
+ self.values = {}
+ self.errors = 0
+
+ # Try to resolve the vendor and version information
+ # for the distro we're running on
+ vendor = None
+ version = None
+ for r in [self.__redhatStyleRelease, self.__debianStyleRelease,
self.__lsbStyleRelease]:
+ vendor, version = r()
+ if vendor and version:
+ break
+
+ self.values["vendor"] = vendor or "Unknown vendor"
+ self.values["version"] = version or "Unknown version"
+
+ self.values["name"], nodename, release, version, self.values["arch"] =
posix.uname()
+
+ for k in self.values.keys():
+ if not self.values[k]:
+ self.errors += 1
+
+ def __str__(self):
+ string = "<os>\n"
+
+ for k in self.values.keys():
+ string += " " + utils.tagify(k, self.values[k]) + "\n"
+
+ string += "</os>\n"
+
+ return string
+
+
+class OSReport:
+
+ def __init__(self):
+
+ self.reports = {}
+ self.reports["os"] = OperatingSystem()
+ self.reports["machine"] = Machine()
+ self.errors = 0
+
+ for k in self.reports.keys():
+ self.errors += self.reports[k].errors
+
+ def __str__(self):
+
+ string = ""
+
+ for k in self.reports.keys():
+ string += str(self.reports[k])
+
+ return string
+
+if __name__ == "__main__":
+ r = OSReport()
+
+ print str(r)
+
+ sys.exit(r.errors)
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/lib/XmTestReport/ProgReport.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/ProgReport.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,119 @@
+#!/usr/bin/python
+
+"""
+ ProgReport.py - Handles the gathering and xml-formatting of supporting
+ program information
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+import utils
+
+import commands
+import re
+import distutils.sysconfig
+import sys
+
+from xmtest import XM_TEST_VERSION
+
+class Prog:
+
+ def __init__(self, name, version):
+ self.vars = {}
+ self.vars["name"] = name
+ self.vars["version"] = version
+
+ def __str__(self):
+ string = "<prog>\n"
+
+ for k in self.vars.keys():
+ string += " " + utils.tagify(k, self.vars[k]) + "\n"
+
+ string += "</prog>\n"
+
+ return string
+
+class UnknownProg(Prog):
+
+ def __init__(self, name):
+ Prog.__init__(self, name, "Unknown Version")
+
+class ProgFactory:
+
+ def getXen(self):
+ status, output = commands.getstatusoutput("xm info")
+ if status != 0:
+ return UnknownProg("xen")
+
+ for l in output.split("\n"):
+ match = re.match("^([a-z_]+)[ ]*: (.*)$", l)
+ if match and match.group(1) == "xen_changeset":
+ return Prog("xen", match.group(2))
+
+ return UnknownProg("xen")
+
+ def getXmTest(self):
+ return Prog("xm-test", XM_TEST_VERSION)
+
+ def getPython(self):
+ return Prog("python", distutils.sysconfig.get_python_version())
+
+ def getXenCaps(self):
+ s, o = commands.getstatusoutput("xm info")
+ if s != 0:
+ return UnknownProg("xen_caps")
+
+ for l in o.split("\n"):
+ match = re.match("^xen_caps[ \t]*: (.*)$", l)
+ if match:
+ return Prog("xen_caps", match.group(1))
+
+class ProgReport:
+
+ def __init__(self):
+
+ self.progs = []
+ self.errors = 0
+
+ f = ProgFactory()
+
+ self.progs.append(f.getXen())
+ self.progs.append(f.getXmTest())
+ self.progs.append(f.getPython())
+ self.progs.append(f.getXenCaps())
+
+ for p in self.progs:
+ if isinstance(p, UnknownProg):
+ self.errors += 1
+
+ def __str__(self):
+ string = "<progs>\n"
+
+ for p in self.progs:
+ string += str(p)
+
+ string += "</progs>\n"
+
+ return string
+
+if __name__ == "__main__":
+ r = ProgReport()
+
+ print str(r)
+
+ sys.exit(r.errors)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestReport/Report.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/Report.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,153 @@
+#!/usr/bin/python
+
+"""
+ Report.py - Handles the coordination of xm-test xml-reporting modules
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+import OSReport
+import ProgReport
+import ResultReport
+import utils
+
+import sys
+import os
+import xml.dom.minidom
+import httplib
+import urllib
+
+#REPORT_HOST = "xmtest-dev.dague.org"
+REPORT_HOST = "xmtest.dague.org"
+REPORT_URL = "/cgi-bin/report-results";
+
+class XmTestReport:
+
+ def __init__(self, files):
+ self.files = files
+
+ def __getContactInfo(self):
+ if os.access("contact_info", os.R_OK):
+ c = file("contact_info")
+ line = c.readline()
+ line = line.strip()
+ return line
+ else:
+ return "nobody@xxxxxxxxxxx"
+
+ def __stringify(self, fileName):
+ f = file(fileName)
+ str = f.read()
+ f.close()
+
+ return str
+
+ def __str__(self):
+ string = "<testname>xm-test</testname>\n"
+ string += "<user>%s</user>\n" % self.__getContactInfo()
+
+ for f in self.files:
+ string += self.__stringify(f)
+
+ return string
+
+# Taken from example in Python Cookbook
+def encodeForm(fieldList):
+ body = []
+ boundary = "-------XmTestReportingXML"
+
+ for name in fieldList.keys():
+ body.append('--' + boundary)
+ body.append('Content-Disposition: form-data; name="%s"; filename="%s"'
% (name, "%s.txt" % name))
+ body.append('Content-Type: text/plain')
+ body.append('')
+ body.append(fieldList[name])
+
+ body.append('')
+ body.append("--" + boundary + "--")
+ body.append('')
+
+ textBody = "\r\n".join(body)
+
+ return 'multipart/form-data; boundary=%s' % boundary, textBody
+
+def postResults(results):
+ conn = httplib.HTTPConnection(REPORT_HOST)
+
+ type, body = encodeForm({"log" : results})
+
+ headers = {"content-type" : type}
+
+ # DEBUG OUTPUT
+ # print "BODY\n%s\nBODY\n" % body
+ # print "%s\n" % type
+ # print headers
+
+ conn.request("POST", REPORT_URL, body, headers)
+
+ resp = conn.getresponse()
+ if resp.status == 200:
+ print >>sys.stderr, "Your results have been submitted successfully!"
+ else:
+ print >>sys.stderr, "Unable to submit results:"
+ print >>sys.stderr, "[http://%s%s] said %i: %s" % (REPORT_HOST,
+ REPORT_URL,
+ resp.status,
+ resp.reason)
+
+ data = resp.read()
+ print >>sys.stderr, data
+
+if __name__ == "__main__":
+
+ if len(sys.argv) <= 1:
+ print "Usage: Report.py [opt] <outputfiles...>"
+ print "Where:"
+ print "-d : don't submit, just dump XML"
+ print "-D : do submit and dump XML"
+ sys.exit(1)
+
+ submit = True
+ dump = False
+ files = []
+
+ for a in sys.argv[1:]:
+ if a == "-d":
+ submit = False
+ dump = True
+ elif a == "-D":
+ dump = True
+ submit = True
+
+ else:
+ if not os.access(a, os.R_OK):
+ print "Unable to access file: %s" % a
+ sys.exit(1)
+ else:
+ files.append(a)
+
+ report = XmTestReport(files)
+
+ xmlout = "<xml>\n%s</xml>\n" % report
+
+ if dump:
+ print xmlout
+
+ if submit:
+ postResults(xmlout)
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/lib/XmTestReport/ResultReport.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/ResultReport.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,157 @@
+#!/usr/bin/python
+
+"""
+ ResultReport.py - Handles the gathering and xml-formatting of xm-test
+ results
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+import utils
+
+import re
+
+class Test:
+
+ def __init__(self, name, state, seq):
+ self.vars = {}
+ self.vars["name"] = name
+ self.vars["state"] = state
+ self.vars["log"] = "NO LOG SUPPLIED"
+ self.vars["seq"] = str(seq)
+
+ def setLog(self, log):
+ self.vars["log"] = log
+
+ def __str__(self):
+ string = "<test>\n"
+
+ for k in self.vars.keys():
+ string += " " + utils.tagify(k, self.vars[k]) + "\n"
+
+ string += "</test>\n"
+
+ return string
+
+class TestGroup:
+
+ def __init__(self, name):
+ self.name = name
+ self.tests = []
+
+ def addTest(self, test):
+ self.tests.append(test)
+
+ def __str__(self):
+ string = "<group>\n"
+ string += " <name>%s</name>\n" % self.name
+
+ for t in self.tests:
+ string += str(t)
+
+ string += "</group>\n"
+
+ return string
+
+class ResultSet:
+
+ def __init__(self):
+ self.groups = []
+
+ def addGroup(self, group):
+ self.groups.append(group)
+
+ def __str__(self):
+ string = "<results>\n"
+
+ for g in self.groups:
+ string += str(g)
+
+ string += "</results>\n"
+
+ return string
+
+class ResultParser:
+
+ def __init__(self):
+ self.groups = {}
+ self.resultSet = None
+
+ def __isImportant(self, line):
+
+ if re.search("^[Mm]ak(e|ing)", line):
+ return False
+ if re.search("^===", line):
+ return False
+ if re.search("^All [0-9]+ tests", line):
+ return False
+ if re.search("^[0-9]+ of [0-9]+ tests", line):
+ return False
+ if re.search("^cp [0-9]+_", line):
+ return False
+ if re.search("^chmod \+x [0-9]+_", line):
+ return False
+
+ return True
+
+ def parse(self, fileName):
+ output = file(fileName);
+ contents = output.read()
+
+ lines = contents.split("\n")
+
+ sequence = 0
+ currentLog = ""
+ for l in lines:
+ match = re.match("^(PASS|FAIL|XPASS|XFAIL|SKIP):
([0-9]+)_([^_]+)_([^\.]+)\.test$", l)
+ if match:
+ # End of current test; build object
+ testStatus = match.group(1)
+ testNumber = match.group(2)
+ testGroup = match.group(3)
+ testName = match.group(4)
+
+ if not testGroup in self.groups.keys():
+ self.groups[testGroup] = TestGroup(testGroup)
+
+ test = Test("%s_%s" % (testNumber, testName), testStatus,
+ sequence)
+ sequence += 1
+ test.setLog(currentLog)
+ self.groups[testGroup].addTest(test)
+
+ currentLog = ""
+
+ else:
+ if self.__isImportant(l):
+ currentLog += l + "\n"
+
+ self.resultSet = ResultSet()
+
+ for g in self.groups:
+ self.resultSet.addGroup(self.groups[g])
+
+ return self.resultSet
+
+if __name__ == "__main__":
+
+ import sys
+
+ r = ResultParser()
+
+ print str(r.parse(sys.argv[1]))
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestReport/utils.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/utils.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,31 @@
+#!/usr/bin/python
+
+"""
+ utils.py - Utilities for reporting xm-test results
+
+ Copyright (C) International Business Machines Corp., 2005
+ Author: Dan Smith <danms@xxxxxxxxxx>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; under version 2 of the License.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+"""
+
+from xml.sax.saxutils import escape
+
+def tagify(tag, string):
+ return "<%s>%s</%s>" % (tag, escape(string.strip()), tag)
+
+
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestReport/xmtest.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/xmtest.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,3 @@
+#!/usr/bin/python
+
+XM_TEST_VERSION = "0.4.0"
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/lib/XmTestReport/xmtest.py.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/lib/XmTestReport/xmtest.py.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,3 @@
+#!/usr/bin/python
+
+XM_TEST_VERSION = "@PACKAGE_VERSION@"
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/missing
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/missing Mon Nov 7 11:53:38 2005
@@ -0,0 +1,357 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-02-08.22
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+# Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@xxxxxxxxxxxxxxxx>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ tar try tar, gnutar, gtar, then tar without non-portable flags
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@xxxxxxx>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+ lex|yacc)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ tar)
+ if test -n "$run"; then
+ echo 1>&2 "ERROR: \`tar' requires --run"
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ exit 1
+ fi
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p'
${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case "$f" in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+ test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+ if test -f "$file"; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo "#! /bin/sh"
+ echo "# Created by GNU Automake missing as a replacement of"
+ echo "# $ $@"
+ echo "exit 0"
+ chmod +x $file
+ exit 1
+ fi
+ ;;
+
+ bison|yacc)
+ echo 1>&2 "\
+WARNING: \`$1' $msg. You should only need it if
+ you modified a \`.y' file. You may need the \`Bison' package
+ in order for those modifications to take effect. You can get
+ \`Bison' from any GNU archive site."
+ rm -f y.tab.c y.tab.h
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.y)
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.c
+ fi
+ SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" y.tab.h
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f y.tab.h ]; then
+ echo >y.tab.h
+ fi
+ if [ ! -f y.tab.c ]; then
+ echo 'main() { return 0; }' >y.tab.c
+ fi
+ ;;
+
+ lex|flex)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.l' file. You may need the \`Flex' package
+ in order for those modifications to take effect. You can get
+ \`Flex' from any GNU archive site."
+ rm -f lex.yy.c
+ if [ $# -ne 1 ]; then
+ eval LASTARG="\${$#}"
+ case "$LASTARG" in
+ *.l)
+ SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+ if [ -f "$SRCFILE" ]; then
+ cp "$SRCFILE" lex.yy.c
+ fi
+ ;;
+ esac
+ fi
+ if [ ! -f lex.yy.c ]; then
+ echo 'main() { return 0; }' >lex.yy.c
+ fi
+ ;;
+
+ help2man)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a dependency of a manual page. You may need the
+ \`Help2man' package in order for those modifications to take
+ effect. You can get \`Help2man' from any GNU archive site."
+
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+ fi
+ if [ -f "$file" ]; then
+ touch $file
+ else
+ test -z "$file" || exec >$file
+ echo ".ab help2man is required to generate this page"
+ exit 1
+ fi
+ ;;
+
+ makeinfo)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified a \`.texi' or \`.texinfo' file, or any other file
+ indirectly affecting the aspect of the manual. The spurious
+ call might also be the consequence of using a buggy \`make' (AIX,
+ DU, IRIX). You might want to install the \`Texinfo' package or
+ the \`GNU make' package. Grab either from any GNU archive site."
+ # The file to touch is that specified with -o ...
+ file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+ if test -z "$file"; then
+ # ... or it is the one specified with @setfilename ...
+ infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+ file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+ # ... or it is derived from the source name (dir/f.texi becomes f.info)
+ test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+ fi
+ touch $file
+ ;;
+
+ tar)
+ shift
+
+ # We have already tried tar in the generic part.
+ # Look for gnutar/gtar before invocation to avoid ugly error
+ # messages.
+ if (gnutar --version > /dev/null 2>&1); then
+ gnutar "$@" && exit 0
+ fi
+ if (gtar --version > /dev/null 2>&1); then
+ gtar "$@" && exit 0
+ fi
+ firstarg="$1"
+ if shift; then
+ case "$firstarg" in
+ *o*)
+ firstarg=`echo "$firstarg" | sed s/o//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ case "$firstarg" in
+ *h*)
+ firstarg=`echo "$firstarg" | sed s/h//`
+ tar "$firstarg" "$@" && exit 0
+ ;;
+ esac
+ fi
+
+ echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+ You may want to install GNU tar or Free paxutils, or check the
+ command line arguments."
+ exit 1
+ ;;
+
+ *)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them. Check the \`README' file,
+ it often tells you about the needed prerequisites for installing
+ this package. You may also peek at any GNU archive site, in case
+ some other package would contain this missing \`$1' program."
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/mkreport
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/mkreport Mon Nov 7 11:53:38 2005
@@ -0,0 +1,71 @@
+#!/usr/bin/perl
+
+open(LOG, $ARGV[0]);
+@lines = <LOG>;
+
+foreach $line (@lines) {
+ if ($line =~ /^[A-Z]+/) {
+ chomp($line);
+ ($type, @rest) = split(/:/, $line);
+
+ $message = "";
+ foreach $chunk (@rest) {
+ $message .= $chunk;
+ }
+
+ if ($type eq "REASON") {
+
+ $last_reason = $message ;
+
+ } elsif ($type =~ /X?FAIL/) {
+
+ $rest[0] =~ /([^\. ]+)\.test/;
+ $name = $1;
+
+ $passfail = $type;
+ $testname = $name;
+ $extra = "\n\t$last_reason\n";
+
+ $last_reason = "Unknown reason";
+
+ } elsif ($type =~ /X?PASS/) {
+
+ $rest[0] =~ /([^\. ]+)\.test/;
+ $name = $1;
+
+ $passfail = $type;
+ $testname = $name;
+ $extra = "";
+
+ $last_reason = "Unknown reason";
+
+ } else {
+
+ $passfail = $type;
+ $testname = "UNKN";
+ $extra = "Unknown status type $type!";
+
+ $last_reason = "Unknown reason";
+
+ }
+
+ push(@results, ([$testname, $passfail, $extra]));
+
+ }
+
+}
+
+foreach $test (@results) {
+
+
+ if ($tests{$test->[0]} eq undef) {
+ if ($test->[1] =~ /^X?FAIL/) {
+ $fmt = "%5s: %s %s\n";
+ printf($fmt, $test->[1], $test->[0], $test->[2]);
+ }
+ $tests{$test->[0]} = 1;
+ }
+
+
+}
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,38 @@
+
+EXTRA_DIST = skel configs
+
+BR_TAR = buildroot-20050823.tar.bz2
+BR_URL = http://buildroot.uclibc.org/downloads/snapshots/$(BR_TAR)
+#BR_URL =
http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
+BR_SRC = buildroot
+BR_IMG = $(BR_SRC)/rootfs.i386.ext2
+
+BR_ROOT = build_i386/root
+
+all: initrd.img
+
+$(BR_TAR):
+ wget $(BR_URL)
+
+$(BR_SRC): $(BR_TAR)
+ tar xjf $(BR_TAR)
+
+$(BR_IMG): $(BR_SRC)
+ cp configs/buildroot $(BR_SRC)/.config
+ cp configs/busybox $(BR_SRC)/package/busybox/busybox.config
+ cp configs/uClibc $(BR_SRC)/toolchain/uClibc/uClibc.config
+ cd $(BR_SRC) && make oldconfig && make
+
+initrd.img: $(BR_IMG)
+ (cd skel; tar cf - .) | (cd $(BR_SRC)/$(BR_ROOT); tar xvf -)
+ cd $(BR_SRC) && make
+ cp $(BR_IMG) initrd.img
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -Rf buildroot
+ rm -f *~
+ rm -f initrd.img
+ rm -f $(BR_TAR)
+ rm -Rf patches make.d
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,309 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = ramdisk
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+EXTRA_DIST = skel configs
+BR_TAR = buildroot-20050823.tar.bz2
+BR_URL = http://buildroot.uclibc.org/downloads/snapshots/$(BR_TAR)
+#BR_URL =
http://buildroot.uclibc.org/downloads/snapshots/buildroot-snapshot.tar.bz2
+BR_SRC = buildroot
+BR_IMG = $(BR_SRC)/rootfs.i386.ext2
+BR_ROOT = build_i386/root
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ramdisk/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign ramdisk/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile
+installdirs:
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+.PHONY: all all-am check check-am clean clean-generic clean-local \
+ distclean distclean-generic distdir dvi dvi-am html html-am \
+ info info-am install install-am install-data install-data-am \
+ install-exec install-exec-am install-info install-info-am \
+ install-man install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am uninstall-info-am
+
+
+all: initrd.img
+
+$(BR_TAR):
+ wget $(BR_URL)
+
+$(BR_SRC): $(BR_TAR)
+ tar xjf $(BR_TAR)
+
+$(BR_IMG): $(BR_SRC)
+ cp configs/buildroot $(BR_SRC)/.config
+ cp configs/busybox $(BR_SRC)/package/busybox/busybox.config
+ cp configs/uClibc $(BR_SRC)/toolchain/uClibc/uClibc.config
+ cd $(BR_SRC) && make oldconfig && make
+
+initrd.img: $(BR_IMG)
+ (cd skel; tar cf - .) | (cd $(BR_SRC)/$(BR_ROOT); tar xvf -)
+ cd $(BR_SRC) && make
+ cp $(BR_IMG) initrd.img
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -Rf buildroot
+ rm -f *~
+ rm -f initrd.img
+ rm -f $(BR_TAR)
+ rm -Rf patches make.d
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/configs/buildroot
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/configs/buildroot Mon Nov 7 11:53:38 2005
@@ -0,0 +1,258 @@
+#
+# Automatically generated make config: don't edit
+#
+BR2_HAVE_DOT_CONFIG=y
+# BR2_arm is not set
+# BR2_armeb is not set
+# BR2_cris is not set
+BR2_i386=y
+# BR2_m68k is not set
+# BR2_mips is not set
+# BR2_mipsel is not set
+# BR2_powerpc is not set
+# BR2_sh is not set
+# BR2_sparc is not set
+BR2_ARCH="i386"
+
+#
+# Build options
+#
+BR2_WGET="wget --passive-ftp"
+BR2_SVN="svn co"
+# BR2_TAR_VERBOSITY is not set
+BR2_SOURCEFORGE_MIRROR="easynews"
+BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
+BR2_JLEVEL=1
+
+#
+# Toolchain Options
+#
+
+#
+# Kernel Header Options
+#
+# BR2_KERNEL_HEADERS_2_4_25 is not set
+# BR2_KERNEL_HEADERS_2_4_27 is not set
+# BR2_KERNEL_HEADERS_2_4_29 is not set
+# BR2_KERNEL_HEADERS_2_4_31 is not set
+# BR2_KERNEL_HEADERS_2_6_11 is not set
+BR2_KERNEL_HEADERS_2_6_12=y
+BR2_DEFAULT_KERNEL_HEADERS="2.6.12"
+
+#
+# uClibc Options
+#
+# BR2_UCLIBC_VERSION_SNAPSHOT is not set
+# BR2_ENABLE_LOCALE is not set
+# BR2_PTHREADS_NATIVE is not set
+
+#
+# Binutils Options
+#
+# BR2_BINUTILS_VERSION_2_14_90_0_8 is not set
+# BR2_BINUTILS_VERSION_2_15 is not set
+# BR2_BINUTILS_VERSION_2_15_94_0_2_2 is not set
+# BR2_BINUTILS_VERSION_2_15_97 is not set
+# BR2_BINUTILS_VERSION_2_16 is not set
+BR2_BINUTILS_VERSION_2_16_1=y
+# BR2_BINUTILS_VERSION_2_16_90_0_3 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_1 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_2 is not set
+# BR2_BINUTILS_VERSION_2_16_91_0_3 is not set
+BR2_BINUTILS_VERSION="2.16.1"
+
+#
+# Gcc Options
+#
+# BR2_GCC_VERSION_3_3_5 is not set
+# BR2_GCC_VERSION_3_3_6 is not set
+BR2_GCC_VERSION_3_4_2=y
+# BR2_GCC_VERSION_3_4_3 is not set
+# BR2_GCC_VERSION_3_4_4 is not set
+# BR2_GCC_VERSION_4_0_0 is not set
+# BR2_GCC_VERSION_4_0_1 is not set
+# BR2_GCC_VERSION_4_1_0 is not set
+BR2_GCC_VERSION="3.4.2"
+# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
+BR2_EXTRA_GCC_CONFIG_OPTIONS=""
+# BR2_INSTALL_LIBSTDCPP is not set
+# BR2_INSTALL_OBJC is not set
+
+#
+# Ccache Options
+#
+BR2_CCACHE=y
+
+#
+# Gdb Options
+#
+# BR2_PACKAGE_GDB is not set
+# BR2_PACKAGE_GDB_SERVER is not set
+# BR2_PACKAGE_GDB_CLIENT is not set
+# BR2_PACKAGE_SSTRIP_TARGET is not set
+# BR2_PACKAGE_SSTRIP_HOST is not set
+
+#
+# Common Toolchain Options
+#
+BR2_ENABLE_MULTILIB=y
+BR2_LARGEFILE=y
+BR2_TARGET_OPTIMIZATION="-Os -pipe"
+BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y
+
+#
+# Package Selection for the target
+#
+
+#
+# The default minimal system
+#
+BR2_PACKAGE_BUSYBOX=y
+# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
+BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox.config"
+
+#
+# The minimum needed to build a uClibc development system
+#
+# BR2_PACKAGE_BASH is not set
+# BR2_PACKAGE_BZIP2 is not set
+# BR2_PACKAGE_COREUTILS is not set
+# BR2_PACKAGE_DIFFUTILS is not set
+# BR2_PACKAGE_ED is not set
+# BR2_PACKAGE_FINDUTILS is not set
+# BR2_PACKAGE_FLEX is not set
+# BR2_PACKAGE_GAWK is not set
+# BR2_PACKAGE_GCC_TARGET is not set
+# BR2_PACKAGE_CCACHE_TARGET is not set
+# BR2_PACKAGE_GREP is not set
+# BR2_PACKAGE_MAKE is not set
+# BR2_PACKAGE_PATCH is not set
+# BR2_PACKAGE_SED is not set
+# BR2_PACKAGE_TAR is not set
+
+#
+# Other stuff
+#
+# BR2_PACKAGE_ACPID is not set
+# BR2_PACKAGE_AUTOCONF is not set
+# BR2_PACKAGE_AUTOMAKE is not set
+# BR2_PACKAGE_BERKELEYDB is not set
+# BR2_PACKAGE_BISON is not set
+# BR2_PACKAGE_BOA is not set
+# BR2_PACKAGE_BRIDGE is not set
+# BR2_PACKAGE_CUSTOMIZE is not set
+# BR2_PACKAGE_ISC_DHCP is not set
+# BR2_PACKAGE_DIRECTFB is not set
+# BR2_PACKAGE_DISTCC is not set
+# BR2_PACKAGE_DM is not set
+# BR2_PACKAGE_DNSMASQ is not set
+# BR2_PACKAGE_DROPBEAR_SSHD is not set
+# BR2_PACKAGE_E2FSPROGS is not set
+# BR2_PACKAGE_FAKEROOT is not set
+# BR2_PACKAGE_FILE is not set
+# BR2_PACKAGE_FREETYPE is not set
+# BR2_PACKAGE_GETTEXT is not set
+# BR2_PACKAGE_GZIP is not set
+# BR2_PACKAGE_HOSTAP is not set
+# BR2_PACKAGE_HOTPLUG is not set
+# BR2_PACKAGE_IPROUTE2 is not set
+# BR2_PACKAGE_IPTABLES is not set
+# BR2_PACKAGE_JPEG is not set
+# BR2_PACKAGE_LESS is not set
+# BR2_PACKAGE_LIBELF is not set
+# BR2_PACKAGE_LIBFLOAT is not set
+# BR2_PACKAGE_LIBGLIB12 is not set
+# BR2_PACKAGE_LIBMAD is not set
+# BR2_PACKAGE_LIBPCAP is not set
+# BR2_PACKAGE_LIBPNG is not set
+# BR2_PACKAGE_LIBSYSFS is not set
+# BR2_PACKAGE_LIBTOOL is not set
+# BR2_PACKAGE_LINKS is not set
+# BR2_PACKAGE_LRZSZ is not set
+# BR2_PACKAGE_LTP-TESTSUITE is not set
+# BR2_PACKAGE_LVM2 is not set
+# BR2_PACKAGE_LZO is not set
+# BR2_PACKAGE_M4 is not set
+# BR2_PACKAGE_MICROCOM is not set
+# BR2_PACKAGE_MICROPERL is not set
+# BR2_PACKAGE_MICROWIN is not set
+# BR2_PACKAGE_MKDOSFS is not set
+# BR2_PACKAGE_MODULE_INIT_TOOLS is not set
+# BR2_PACKAGE_MODUTILS is not set
+# BR2_PACKAGE_MPG123 is not set
+# BR2_PACKAGE_MROUTED is not set
+# BR2_PACKAGE_MTD is not set
+# BR2_PACKAGE_NANO is not set
+# BR2_PACKAGE_NCURSES is not set
+# BR2_PACKAGE_NETKITBASE is not set
+# BR2_PACKAGE_NETKITTELNET is not set
+# BR2_PACKAGE_NETSNMP is not set
+# BR2_PACKAGE_NEWT is not set
+# BR2_PACKAGE_NTP is not set
+# BR2_PACKAGE_OPENNTPD is not set
+# BR2_PACKAGE_OPENSSH is not set
+# BR2_PACKAGE_OPENSSL is not set
+# BR2_PACKAGE_OPENVPN is not set
+# BR2_PACKAGE_PCIUTILS is not set
+# BR2_PACKAGE_PORTAGE is not set
+# BR2_PACKAGE_PORTMAP is not set
+# BR2_PACKAGE_PPPD is not set
+# BR2_PACKAGE_PROCPS is not set
+# BR2_PACKAGE_PYTHON is not set
+# BR2_PACKAGE_RAIDTOOLS is not set
+# BR2_READLINE is not set
+# BR2_PACKAGE_RSYNC is not set
+# BR2_PACKAGE_RXVT is not set
+# BR2_PACKAGE_SDL is not set
+# BR2_PACKAGE_SFDISK is not set
+# BR2_PACKAGE_SLANG is not set
+# BR2_PACKAGE_SOCAT is not set
+# BR2_PACKAGE_STRACE is not set
+# BR2_PACKAGE_TCL is not set
+# BR2_PACKAGE_TCPDUMP is not set
+# BR2_PACKAGE_TFTPD is not set
+# BR2_PACKAGE_TINYLOGIN is not set
+# BR2_PACKAGE_TINYX is not set
+# BR2_PACKAGE_TN5250 is not set
+# BR2_PACKAGE_TTCP is not set
+# BR2_PACKAGE_UDEV is not set
+# BR2_PACKAGE_UDHCP is not set
+# BR2_PACKAGE_UTIL-LINUX is not set
+# BR2_PACKAGE_VALGRIND is not set
+# BR2_PACKAGE_VTUN is not set
+# BR2_PACKAGE_WGET is not set
+# BR2_PACKAGE_WHICH is not set
+# BR2_PACKAGE_WIRELESS_TOOLS is not set
+# BR2_PACKAGE_XORG is not set
+# BR2_PACKAGE_ZLIB is not set
+
+#
+# Target Options
+#
+# BR2_TARGET_ROOTFS_CRAMFS is not set
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
+BR2_TARGET_ROOTFS_EXT2_INODES=0
+BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
+BR2_TARGET_ROOTFS_EXT2_SQUASH=y
+BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
+# BR2_TARGET_ROOTFS_EXT2_GZ is not set
+BR2_TARGET_ROOTFS_EXT2_COPYTO=""
+# BR2_TARGET_ROOTFS_JFFS2 is not set
+# BR2_TARGET_ROOTFS_SQUASHFS is not set
+# BR2_TARGET_ROOTFS_TAR is not set
+# BR2_TARGET_GRUB is not set
+# BR2_TARGET_SYSLINUX is not set
+
+#
+# Board Support Options
+#
+# BR2_TARGET_SOEKRIS_NET4521 is not set
+# BR2_TARGET_VIA_EPIA_MII is not set
+
+#
+# Generic System Support
+#
+# BR2_TARGET_GENERIC_ACCESS_POINT is not set
+# BR2_TARGET_GENERIC_FIREWALL is not set
+# BR2_TARGET_GENERIC_DEV_SYSTEM is not set
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/configs/busybox
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/configs/busybox Mon Nov 7 11:53:38 2005
@@ -0,0 +1,465 @@
+#
+# Automatically generated make config: don't edit
+#
+HAVE_DOT_CONFIG=y
+
+#
+# General Configuration
+#
+# CONFIG_FEATURE_BUFFERS_USE_MALLOC is not set
+CONFIG_FEATURE_BUFFERS_GO_ON_STACK=y
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_INSTALLER is not set
+# CONFIG_LOCALE_SUPPORT is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_FEATURE_DEVPTS=y
+# CONFIG_FEATURE_CLEAN_UP is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_SELINUX is not set
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+CONFIG_LFS=y
+# USING_CROSS_COMPILER is not set
+EXTRA_CFLAGS_OPTIONS=""
+
+#
+# Installation Options
+#
+# CONFIG_INSTALL_NO_USR is not set
+PREFIX="./_install"
+
+#
+# Archival Utilities
+#
+# CONFIG_AR is not set
+CONFIG_BUNZIP2=y
+# CONFIG_CPIO is not set
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+CONFIG_GUNZIP=y
+# CONFIG_FEATURE_GUNZIP_UNCOMPRESS is not set
+CONFIG_GZIP=y
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+CONFIG_FEATURE_TAR_BZIP2=y
+# CONFIG_FEATURE_TAR_FROM is not set
+CONFIG_FEATURE_TAR_GZIP=y
+# CONFIG_FEATURE_TAR_COMPRESS is not set
+# CONFIG_FEATURE_TAR_OLDGNU_COMPATABILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+# CONFIG_FEATURE_TAR_LONG_OPTIONS is not set
+# CONFIG_UNCOMPRESS is not set
+CONFIG_UNZIP=y
+
+#
+# Common options for cpio and tar
+#
+# CONFIG_FEATURE_UNARCHIVE_TAPE is not set
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+# CONFIG_CAL is not set
+CONFIG_CAT=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+CONFIG_CHROOT=y
+CONFIG_CMP=y
+CONFIG_CP=y
+CONFIG_CUT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+CONFIG_DD=y
+CONFIG_DF=y
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+CONFIG_EXPR=y
+CONFIG_FALSE=y
+# CONFIG_FOLD is not set
+CONFIG_HEAD=y
+# CONFIG_FEATURE_FANCY_HEAD is not set
+CONFIG_HOSTID=y
+CONFIG_ID=y
+CONFIG_INSTALL=y
+# CONFIG_LENGTH is not set
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=n
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+# CONFIG_MKFIFO is not set
+CONFIG_MKNOD=y
+CONFIG_MV=y
+# CONFIG_OD is not set
+# CONFIG_PRINTF is not set
+CONFIG_PWD=y
+# CONFIG_REALPATH is not set
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_SEQ is not set
+CONFIG_SHA1SUM=y
+CONFIG_SLEEP=y
+# CONFIG_FEATURE_FANCY_SLEEP is not set
+CONFIG_SORT=n
+CONFIG_STTY=y
+CONFIG_SYNC=y
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=n
+CONFIG_TEE=n
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=n
+CONFIG_TEST=y
+
+#
+# test (forced enabled for use with shell)
+#
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+# CONFIG_TR is not set
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=n
+CONFIG_UUENCODE=n
+# CONFIG_WATCH is not set
+CONFIG_WC=y
+# CONFIG_WHO is not set
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls and more
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=n
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+# CONFIG_DUMPKMAP is not set
+# CONFIG_LOADFONT is not set
+# CONFIG_LOADKMAP is not set
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+# CONFIG_SETKEYCODES is not set
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+# CONFIG_PIPE_PROGRESS is not set
+CONFIG_READLINK=y
+CONFIG_RUN_PARTS=n
+CONFIG_START_STOP_DAEMON=n
+CONFIG_WHICH=n
+
+#
+# Editors
+#
+# CONFIG_AWK is not set
+# CONFIG_PATCH is not set
+CONFIG_SED=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+# CONFIG_FEATURE_FIND_NEWER is not set
+# CONFIG_FEATURE_FIND_INUM is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_INITRD=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INIT_SWAPON=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+CONFIG_HALT=y
+CONFIG_POWEROFF=y
+CONFIG_REBOOT=y
+# CONFIG_MESG is not set
+
+#
+# Login/Password Management Utilities
+#
+# CONFIG_USE_BB_PWD_GRP is not set
+CONFIG_ADDGROUP=y
+CONFIG_DELGROUP=y
+CONFIG_ADDUSER=y
+CONFIG_DELUSER=y
+CONFIG_GETTY=y
+# CONFIG_FEATURE_UTMP is not set
+# CONFIG_FEATURE_WTMP is not set
+CONFIG_LOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_SU=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Common options for adduser, deluser, login, su
+#
+CONFIG_FEATURE_SHADOWPASSWDS=y
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_ADJTIMEX is not set
+# CONFIG_CROND is not set
+# CONFIG_CRONTAB is not set
+CONFIG_DC=y
+# CONFIG_DEVFSD is not set
+# CONFIG_LAST is not set
+# CONFIG_HDPARM is not set
+# CONFIG_MAKEDEVS is not set
+CONFIG_MT=y
+# CONFIG_RX is not set
+CONFIG_STRINGS=y
+CONFIG_TIME=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Linux Module Utilities
+#
+CONFIG_INSMOD=y
+CONFIG_FEATURE_2_4_MODULES=y
+# CONFIG_FEATURE_2_6_MODULES is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+CONFIG_LSMOD=y
+CONFIG_FEATURE_QUERY_MODULE_INTERFACE=y
+CONFIG_MODPROBE=y
+CONFIG_RMMOD=y
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+
+#
+# Networking Utilities
+#
+# CONFIG_FEATURE_IPV6 is not set
+# CONFIG_ARPING is not set
+# CONFIG_FTPGET is not set
+# CONFIG_FTPPUT is not set
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+# CONFIG_FEATURE_IFCONFIG_SLIP is not set
+# CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ is not set
+# CONFIG_FEATURE_IFCONFIG_HW is not set
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+CONFIG_IFUPDOWN=y
+# CONFIG_FEATURE_IFUPDOWN_IP is not set
+CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN=y
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
+# CONFIG_FEATURE_IFUPDOWN_IPX is not set
+# CONFIG_FEATURE_IFUPDOWN_MAPPING is not set
+# CONFIG_INETD is not set
+# CONFIG_IP is not set
+# CONFIG_IPCALC is not set
+# CONFIG_IPADDR is not set
+# CONFIG_IPLINK is not set
+# CONFIG_IPROUTE is not set
+# CONFIG_IPTUNNEL is not set
+# CONFIG_NAMEIF is not set
+# CONFIG_NC is not set
+CONFIG_NETSTAT=y
+CONFIG_NSLOOKUP=y
+CONFIG_PING=y
+CONFIG_FEATURE_FANCY_PING=y
+CONFIG_ROUTE=y
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+# CONFIG_FEATURE_TELNET_AUTOLOGIN is not set
+# CONFIG_TELNETD is not set
+# CONFIG_TFTP is not set
+# CONFIG_TRACEROUTE is not set
+# CONFIG_VCONFIG is not set
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+# CONFIG_FEATURE_WGET_IP6_LITERAL is not set
+
+#
+# udhcp Server/Client
+#
+CONFIG_UDHCPD=y
+CONFIG_UDHCPC=y
+CONFIG_DUMPLEASES=y
+CONFIG_FEATURE_UDHCP_SYSLOG=y
+# CONFIG_FEATURE_UDHCP_DEBUG is not set
+
+#
+# Process Utilities
+#
+CONFIG_FREE=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_PIDOF=y
+CONFIG_PS=y
+# CONFIG_RENICE is not set
+# CONFIG_TOP is not set
+CONFIG_UPTIME=y
+# CONFIG_SYSCTL is not set
+
+#
+# Another Bourne-like Shell
+#
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_LASH is not set
+# CONFIG_FEATURE_SH_IS_MSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+CONFIG_ASH=y
+
+#
+# Ash Shell Options
+#
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+CONFIG_ASH_MATH_SUPPORT=y
+CONFIG_ASH_MATH_SUPPORT_64=y
+# CONFIG_ASH_GETOPTS is not set
+# CONFIG_ASH_CMDCMD is not set
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+# CONFIG_ASH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH is not set
+# CONFIG_LASH is not set
+# CONFIG_MSH is not set
+
+#
+# Bourne Shell Options
+#
+# CONFIG_FEATURE_SH_EXTRA_QUIET is not set
+# CONFIG_FEATURE_SH_STANDALONE_SHELL is not set
+CONFIG_FEATURE_COMMAND_EDITING=y
+CONFIG_FEATURE_COMMAND_HISTORY=15
+CONFIG_FEATURE_COMMAND_SAVEHISTORY=y
+CONFIG_FEATURE_COMMAND_TAB_COMPLETION=y
+# CONFIG_FEATURE_COMMAND_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_SH_FANCY_PROMPT=y
+
+#
+# System Logging Utilities
+#
+CONFIG_SYSLOGD=y
+CONFIG_FEATURE_ROTATE_LOGFILE=y
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_KLOGD=y
+CONFIG_LOGGER=y
+
+#
+# Linux System Utilities
+#
+CONFIG_DMESG=y
+# CONFIG_FBSET is not set
+# CONFIG_FDFLUSH is not set
+CONFIG_FDFORMAT=y
+CONFIG_FDISK=y
+FDISK_SUPPORT_LARGE_DISKS=y
+CONFIG_FEATURE_FDISK_WRITABLE=y
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FREERAMDISK is not set
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_MINIX is not set
+CONFIG_GETOPT=y
+CONFIG_HEXDUMP=y
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONGOPTIONS=y
+# CONFIG_LOSETUP is not set
+# CONFIG_MKSWAP is not set
+CONFIG_MORE=y
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+CONFIG_SWAPONOFF=y
+CONFIG_MOUNT=y
+# CONFIG_NFSMOUNT is not set
+CONFIG_UMOUNT=y
+# CONFIG_FEATURE_MOUNT_FORCE is not set
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+# CONFIG_FEATURE_MTAB_SUPPORT is not set
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/configs/uClibc
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/configs/uClibc Mon Nov 7 11:53:38 2005
@@ -0,0 +1,172 @@
+#
+# Automatically generated make config: don't edit
+#
+# TARGET_alpha is not set
+# TARGET_arm is not set
+# TARGET_bfin is not set
+# TARGET_cris is not set
+# TARGET_e1 is not set
+# TARGET_frv is not set
+# TARGET_h8300 is not set
+TARGET_i386=y
+# TARGET_i960 is not set
+# TARGET_m68k is not set
+# TARGET_microblaze is not set
+# TARGET_mips is not set
+# TARGET_nios is not set
+# TARGET_nios2 is not set
+# TARGET_powerpc is not set
+# TARGET_sh is not set
+# TARGET_sh64 is not set
+# TARGET_sparc is not set
+# TARGET_v850 is not set
+# TARGET_x86_64 is not set
+
+#
+# Target Architecture Features and Options
+#
+HAVE_ELF=y
+ARCH_SUPPORTS_LITTLE_ENDIAN=y
+TARGET_ARCH="i386"
+# CONFIG_GENERIC_386 is not set
+# CONFIG_386 is not set
+# CONFIG_486 is not set
+# CONFIG_586 is not set
+# CONFIG_586MMX is not set
+# CONFIG_686 is not set
+# CONFIG_PENTIUMII is not set
+# CONFIG_PENTIUMIII is not set
+CONFIG_PENTIUM4=y
+# CONFIG_K6 is not set
+# CONFIG_K7 is not set
+# CONFIG_ELAN is not set
+# CONFIG_CRUSOE is not set
+# CONFIG_WINCHIPC6 is not set
+# CONFIG_WINCHIP2 is not set
+# CONFIG_CYRIXIII is not set
+# CONFIG_NEHEMIAH is not set
+ARCH_LITTLE_ENDIAN=y
+# ARCH_BIG_ENDIAN is not set
+# ARCH_HAS_NO_MMU is not set
+ARCH_HAS_MMU=y
+UCLIBC_HAS_FLOATS=y
+HAS_FPU=y
+DO_C99_MATH=y
+KERNEL_SOURCE="/tmp/buildroot/toolchain_build_i386/linux"
+C_SYMBOL_PREFIX=""
+HAVE_DOT_CONFIG=y
+
+#
+# General Library Settings
+#
+# HAVE_NO_PIC is not set
+DOPIC=y
+# HAVE_NO_SHARED is not set
+HAVE_SHARED=y
+# ARCH_HAS_NO_LDSO is not set
+BUILD_UCLIBC_LDSO=y
+# FORCE_SHAREABLE_TEXT_SEGMENTS is not set
+LDSO_LDD_SUPPORT=y
+LDSO_CACHE_SUPPORT=y
+# LDSO_PRELOAD_FILE_SUPPORT is not set
+LDSO_BASE_FILENAME="ld.so"
+# LDSO_RUNPATH is not set
+# DL_FINI_CRT_COMPAT is not set
+UCLIBC_CTOR_DTOR=y
+# HAS_NO_THREADS is not set
+UCLIBC_HAS_THREADS=y
+PTHREADS_DEBUG_SUPPORT=y
+UCLIBC_HAS_LFS=y
+# UCLIBC_STATIC_LDCONFIG is not set
+# MALLOC is not set
+# MALLOC_SIMPLE is not set
+MALLOC_STANDARD=y
+MALLOC_GLIBC_COMPAT=y
+UCLIBC_DYNAMIC_ATEXIT=y
+HAS_SHADOW=y
+# UNIX98PTY_ONLY is not set
+ASSUME_DEVPTS=y
+UCLIBC_HAS_TM_EXTENSIONS=y
+UCLIBC_HAS_TZ_CACHING=y
+UCLIBC_HAS_TZ_FILE=y
+UCLIBC_HAS_TZ_FILE_READ_MANY=y
+UCLIBC_TZ_FILE_PATH="/etc/TZ"
+
+#
+# Networking Support
+#
+UCLIBC_HAS_IPV6=y
+UCLIBC_HAS_RPC=y
+UCLIBC_HAS_FULL_RPC=y
+
+#
+# String and Stdio Support
+#
+UCLIBC_HAS_STRING_GENERIC_OPT=y
+UCLIBC_HAS_STRING_ARCH_OPT=y
+UCLIBC_HAS_CTYPE_TABLES=y
+UCLIBC_HAS_CTYPE_SIGNED=y
+# UCLIBC_HAS_CTYPE_UNSAFE is not set
+UCLIBC_HAS_CTYPE_CHECKED=y
+# UCLIBC_HAS_CTYPE_ENFORCED is not set
+UCLIBC_HAS_WCHAR=y
+# UCLIBC_HAS_LOCALE is not set
+UCLIBC_HAS_HEXADECIMAL_FLOATS=y
+UCLIBC_HAS_GLIBC_CUSTOM_PRINTF=y
+UCLIBC_PRINTF_SCANF_POSITIONAL_ARGS=9
+UCLIBC_HAS_SCANF_GLIBC_A_FLAG=y
+# UCLIBC_HAS_STDIO_BUFSIZ_NONE is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_256 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_512 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_1024 is not set
+# UCLIBC_HAS_STDIO_BUFSIZ_2048 is not set
+UCLIBC_HAS_STDIO_BUFSIZ_4096=y
+# UCLIBC_HAS_STDIO_BUFSIZ_8192 is not set
+UCLIBC_HAS_STDIO_BUILTIN_BUFFER_NONE=y
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_4 is not set
+# UCLIBC_HAS_STDIO_BUILTIN_BUFFER_8 is not set
+# UCLIBC_HAS_STDIO_SHUTDOWN_ON_ABORT is not set
+UCLIBC_HAS_STDIO_GETC_MACRO=y
+UCLIBC_HAS_STDIO_PUTC_MACRO=y
+UCLIBC_HAS_STDIO_AUTO_RW_TRANSITION=y
+# UCLIBC_HAS_FOPEN_LARGEFILE_MODE is not set
+UCLIBC_HAS_FOPEN_EXCLUSIVE_MODE=y
+UCLIBC_HAS_GLIBC_CUSTOM_STREAMS=y
+UCLIBC_HAS_PRINTF_M_SPEC=y
+UCLIBC_HAS_ERRNO_MESSAGES=y
+# UCLIBC_HAS_SYS_ERRLIST is not set
+UCLIBC_HAS_SIGNUM_MESSAGES=y
+# UCLIBC_HAS_SYS_SIGLIST is not set
+UCLIBC_HAS_GNU_GETOPT=y
+
+#
+# Big and Tall
+#
+UCLIBC_HAS_REGEX=y
+# UCLIBC_HAS_WORDEXP is not set
+UCLIBC_HAS_FTW=y
+UCLIBC_HAS_GLOB=y
+
+#
+# Library Installation Options
+#
+SHARED_LIB_LOADER_PREFIX="/lib"
+RUNTIME_PREFIX="/"
+DEVEL_PREFIX="/usr/"
+
+#
+# uClibc security related options
+#
+# UCLIBC_SECURITY is not set
+
+#
+# uClibc development/debugging options
+#
+CROSS_COMPILER_PREFIX="/tmp/buildroot/build_i386/staging_dir/bin/i386-linux-uclibc-"
+# DODEBUG is not set
+# DODEBUG_PT is not set
+# DOASSERTS is not set
+# SUPPORT_LD_DEBUG is not set
+# SUPPORT_LD_DEBUG_EARLY is not set
+WARNINGS="-Wall"
+# UCLIBC_MJN3_ONLY is not set
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/skel/.profile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/skel/.profile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+export PS1="@%@%> "
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/skel/etc/init.d/rcS
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/skel/etc/init.d/rcS Mon Nov 7 11:53:38 2005
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+mount -a
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/skel/etc/inittab
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/skel/etc/inittab Mon Nov 7 11:53:38 2005
@@ -0,0 +1,5 @@
+# This is run first except when booting in single-user mode.
+#
+::sysinit:/etc/init.d/rcS
+
+::askfirst:-/bin/sh
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/ramdisk/skel/root/.profile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/ramdisk/skel/root/.profile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,3 @@
+#!/bin/sh
+
+export PS1="@%@%> "
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/runtest.sh
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/runtest.sh Mon Nov 7 11:53:38 2005
@@ -0,0 +1,215 @@
+#!/bin/sh
+
+usage() {
+ echo "Usage: $0 [opts] <logfile>"
+ echo " Where opts are:"
+ echo " -d : do not submit a report for this run"
+ echo " -b : do not ask any questions (batch mode)"
+ echo " -e <email> : set email address for report"
+}
+##
+## Test driver script
+##
+
+#
+# Defaults
+#
+MAXFAIL=10
+report=yes
+batch=no
+
+#
+# Resolve options
+#
+while [ $# -gt 0 ]
+do
+ case "$1" in
+ -d)
+ echo "(Skipping report submission)"
+ report=no
+ ;;
+ -b)
+ echo "(Batch mode)"
+ batch=yes
+ ;;
+ -e)
+ shift
+ echo $1 > contact_info
+ echo "(Email set to $1)"
+ ;;
+ *)
+ LOGFILE=$1
+ break
+ ;;
+ esac
+ shift
+done
+
+#
+# Usage
+#
+if [ -z $LOGFILE ]; then
+ usage
+ exit 1
+fi
+
+#
+# Output files
+#
+OSREPORTTEMP=${LOGFILE}.os.xml
+PROGREPORTTEMP=${LOGFILE}.prog.xml
+RESULTREPORTTEMP=${LOGFILE}.result.xml
+OUTPUT=${LOGFILE}.output
+SUMMARY=${LOGFILE}.summary
+PASSFAIL=${LOGFILE}.passfail
+REPORT=${LOGFILE}.report
+FAILURES=${LOGFILE}.failures
+
+#
+# Make sure we're root
+#
+uid=$(id -u)
+if [ $uid != 0 ]; then
+ echo "ERROR: I must be run as root!"
+ exit 1
+fi
+
+#
+# See if the ramdisk has been built
+#
+rdsize=$(stat -c %s ramdisk/initrd.img 2>/dev/null)
+if [ -z "$rdsize" ] || [ $rdsize -le 16384 ]; then
+ echo "Cannot find a valid ramdisk. You need to run \"make\" or"
+ echo "copy in a previously-built ramdisk to the ramdisk/ directory"
+ exit 1
+fi
+
+#
+# See if xend is running
+#
+if ! xm list >/dev/null 2>&1; then
+ echo "'xm list' failed: is xend running?"
+ exit 1
+fi
+
+#
+# Make sure permissions are correct
+#
+chmod a+x lib/XmTestReport/*
+chmod a+x mkreport mergereport
+
+#
+# Get contact info if needed
+#
+if [ ! -f contact_info ]; then
+ if [ "$batch" = "yes" ]; then
+ echo "Unable to read contact_info!"
+ echo "Please run me once interactively before using batch mode!"
+ exit 1
+ else
+ echo "Please provide your email address so that we can "
+ echo "contact you if we need further information concerning"
+ echo "your results. Any information provided will be"
+ echo "kept private. If you wish to remain anonymous, please"
+ echo "hit [ENTER] now."
+
+ while ! echo "$EMAIL" | grep -q '@'; do
+ echo
+ echo -n "Your email address: "
+ read EMAIL
+ if [ -z $EMAIL ]; then
+ EMAIL="anonymous@xxxxxxxxxxxxx"
+ fi
+ done
+ echo $EMAIL > contact_info
+ fi
+fi
+
+#
+# Collect environment information for XML report
+#
+if ! ./lib/XmTestReport/OSReport.py > $OSREPORTTEMP; then
+ echo "Unable to generate clean OSReport"
+ echo "Take a look at $OSREPORTTEMP"
+ exit 1
+fi
+if ! ./lib/XmTestReport/ProgReport.py > $PROGREPORTTEMP; then
+ echo "Unable to generate clean ProgReport"
+ echo "Take a look at $PROGREPORTTEMP"
+ exit 1
+fi
+
+#
+# Run the tests
+#
+export TEST_VERBOSE=1
+echo Running tests...
+make -k check > $OUTPUT 2>&1
+
+#
+# Generate some plain-text reports
+#
+echo "Making PASS/FAIL report ($PASSFAIL)..."
+cat $OUTPUT | egrep '(REASON|PASS|FAIL|XPASS|XFAIL|SKIP)' | perl -pe
's/^(PASS|FAIL|XPASS|XFAIL)(.+)$/$1$2\n/' > $PASSFAIL
+
+echo "Making FAIL report ($FAILURES)..."
+cat $PASSFAIL | egrep '(REASON|FAIL)' > $FAILURES
+
+NUMPASS=`grep -c PASS $OUTPUT`
+NUMFAIL=`grep -c FAIL $OUTPUT`
+NUMXPASS=`grep -c XPASS $OUTPUT`
+NUMXFAIL=`grep -c XFAIL $OUTPUT`
+cat > $SUMMARY << EOF
+Xm-test execution summary:
+ PASS: $NUMPASS
+ FAIL: $NUMFAIL
+ XPASS: $NUMXPASS
+ XFAIL: $NUMXFAIL
+EOF
+
+cat $SUMMARY > $REPORT
+
+echo -e '\n\nDetails:\n' >> $REPORT
+
+./mkreport $PASSFAIL >> $REPORT
+
+#
+# Check to see if it's worth reporting these results
+#
+#if [ "$batch" = "no" ] &&
+# [ "$report" = "yes" ] &&
+# [ $NUMFAIL -gt $MAXFAIL ]; then
+# echo "NOTE: $NUMFAIL tests failed, which may be erroneous. It may"
+# echo "be a good idea to review the report before sending. If you"
+# echo "choose not to submit the report, it will be saved for your review"
+# echo "and later submission."
+# echo
+# echo -n "Submit anyway? [y/n] "
+# read ANSWER
+# if [ "$ANSWER" = "n" ]; then
+# report=no
+# fi
+#fi
+
+#
+# Generate the XML result report
+#
+if ! ./lib/XmTestReport/ResultReport.py $OUTPUT > $RESULTREPORTTEMP; then
+ echo "Unable to generate clean ResultReport"
+ echo "Take a look at $RESULTREPORTTEMP"
+ exit 1
+fi
+
+#
+# Maybe submit report and save the combined XML file
+#
+if [ "$report" = "yes" ]; then
+ echo "Sending report..."
+ ./lib/XmTestReport/Report.py -D $OSREPORTTEMP $PROGREPORTTEMP \
+ $RESULTREPORTTEMP > $1.xml
+ echo "Report also saved in $1.xml"
+else
+ echo "Saving report to $1.xml..."
+ ./lib/XmTestReport/Report.py -d $OSREPORTTEMP $PROGREPORTTEMP \
+ $RESULTREPORTTEMP > $1.xml
+fi
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,46 @@
+SUBDIRS = \
+ block-create \
+ block-list \
+ block-destroy \
+ console \
+ create \
+ destroy \
+ dmesg \
+ domid \
+ domname \
+ help \
+ info \
+ list \
+ memmax \
+ memset \
+ pause \
+ reboot \
+ sedf \
+ shutdown \
+ sysrq \
+ unpause \
+ vcpu-disable \
+ vcpu-pin \
+ enforce_dom0_cpus \
+ save restore migrate
+
+DISABLED_TESTS = save \
+ restore \
+ migrate
+
+TESTS =
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS) $(SUBDIRS) $(DISABLED_TESTS)
Makefile.am.template
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/Makefile.am.template
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/Makefile.am.template Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+
+SUBDIRS =
+
+TESTS = 01_mytest.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,548 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = \
+ block-create \
+ block-list \
+ block-destroy \
+ console \
+ create \
+ destroy \
+ dmesg \
+ domid \
+ domname \
+ help \
+ info \
+ list \
+ memmax \
+ memset \
+ pause \
+ reboot \
+ sedf \
+ shutdown \
+ sysrq \
+ unpause \
+ vcpu-disable \
+ vcpu-pin \
+ enforce_dom0_cpus \
+ save restore migrate
+
+DISABLED_TESTS = save \
+ restore \
+ migrate
+
+TESTS =
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS) $(SUBDIRS) $(DISABLED_TESTS)
Makefile.am.template
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/01_block_attach_device_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/01_block_attach_device_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+
+status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" %
domain.getName())
+if status != 0:
+ FAIL("xm block-attach returned invalid %i != 0" % status)
+
+try:
+ run = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+if not re.search("sdb1",run["output"]):
+ FAIL("Device is not actually connected to the domU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/02_block_attach_file_device_pos.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+
+status, output = traceCommand("xm block-attach %s file:/dev/ram1 sdb2 w" %
domain.getName())
+if status != 0:
+ FAIL("xm block-attach returned invalid %i != 0" % status)
+
+try:
+ run = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+if not re.search("sdb2",run["output"]):
+ FAIL("Device is not actually connected to the domU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/04_block_attach_device_repeatedly_pos.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,51 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+for i in range(10):
+ status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" %
domain.getName())
+ if status != 0:
+ FAIL("xm block-attach returned invalid %i != 0" % status)
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("sdb1", run['output']):
+ FAIL("Device is not actually attached to domU")
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++
b/tools/xm-test/tests/block-create/05_block_attach_and_dettach_device_repeatedly_pos.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,61 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+
+for i in range(10):
+ status, output = traceCommand("xm block-attach %s phy:ram1 sdb1 w" %
domain.getName())
+ if status != 0:
+ FAIL("xm block-attach returned invalid %i != 0" % status)
+ # verify that it comes
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("sdb1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not
show that!")
+
+ status, output = traceCommand("xm block-detach %s 2065" %
domain.getName())
+ if status != 0:
+ FAIL("xm block-detach returned invalid %i != 0" % status)
+ # verify that it goes
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("sdb1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still
showing that!")
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/06_block_attach_baddomain_neg.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+from XmTestLib import *
+
+status, output = traceCommand("xm block-attach NOT-EXIST phy:ram1 sdb1 w")
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+elif where > 1:
+ FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/07_block_attach_baddevice_neg.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,60 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+
+status, output = traceCommand("xm block-attach %s phy:NOT-EXIST sdb1 w" %
domain.getName())
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+elif where > 1:
+ FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
+
+try:
+ run = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+if re.search("sdb1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/08_block_attach_bad_filedevice_neg.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,59 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+status, output = traceCommand("xm block-attach %s file:/dev/NOT-EXIST sdb1 w"
% domain.getName())
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm block-attach returned bad status, expected non 0, status is:
%i" % status )
+elif where > 1:
+ FAIL("xm block-attach returned bad output, expected Error, output is:
%s" % output )
+
+try:
+ run = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+if re.search("sdb1",run["output"]):
+ FAIL("Non existent Device was connected to the domU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++
b/tools/xm-test/tests/block-create/09_block_attach_and_dettach_device_check_data_pos.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,74 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+os.system("mkfs.ext2 -F /dev/ram1")
+
+for i in range(10):
+ status, output = traceCommand("xm block-attach %s phy:ram1 hda1 w" %
domain.getName())
+ if status != 0:
+ FAIL("xm block-attach returned invalid %i != 0" % status)
+ # verify that it comes
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search("hda1", run["output"]):
+ FAIL("Failed to attach block device: /proc/partitions does not
show that!")
+
+ console.runCmd("mkdir -p /mnt/hda1; mount /dev/hda1 /mnt/hda1")
+
+ if i:
+ run = console.runCmd("cat /mnt/hda1/myfile | grep %s" % (i-1))
+ if run['return']:
+ FAIL("File created was lost or not updated!")
+
+ console.runCmd("echo \"%s\" > /mnt/hda1/myfile" % i)
+ run = console.runCmd("cat /mnt/hda1/myfile")
+ print run['output']
+ console.runCmd("umount /mnt/hda1")
+
+ status, output = traceCommand("xm block-detach %s 769" %
domain.getName())
+ if status != 0:
+ FAIL("xm block-detach returned invalid %i != 0" % status)
+ # verify that it goes
+ run = console.runCmd("cat /proc/partitions")
+ if re.search("hda1", run["output"]):
+ FAIL("Failed to dettach block device: /proc/partitions still
showing that!")
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++
b/tools/xm-test/tests/block-create/10_block_attach_dettach_multiple_devices.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,106 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import sys
+import re
+import time
+import random
+from xen.util import blkif
+
+from os import path.basename
+
+from XmTestLib import *
+
+def availableRamdisks():
+ i = 0
+ while os.access("/dev/ram%d" % i, os.F_OK ):
+ i += 1
+
+ return i
+
+def attach(phy, devname):
+ # Attach
+ status, output = traceCommand("xm block-attach %s phy:%s %s w" %
(domain.getName(), phy, devname))
+ if status != 0:
+ return -1, "xm block-attach returned invalid %i != 0" % status
+
+ run = console.runCmd("cat /proc/partitions")
+ if not re.search(basename(devname), run["output"]):
+ return -2, "Failed to attach block device: /proc/partitions does not
show that!"
+
+ return 0, None
+
+
+def dettach(devname):
+ devnum = blkif.blkdev_name_to_number(devname)
+
+ status, output = traceCommand("xm block-detach %s %d" % (domain.getName(),
devnum))
+ if status != 0:
+ return -1, "xm block-attach returned invalid %i != 0" % status
+
+ run = console.runCmd("cat /proc/partitions")
+ if re.search(basename(devname), run["output"]):
+ return -2, "Failed to dettach block device: /proc/partitions still
showing that!"
+
+ return 0, None
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+
+ramdisks = availableRamdisks()-1
+print "ramdisks=%d" % ramdisks
+i = 0
+devices = []
+
+while i < ramdisks or devices:
+ op = random.randint(0,1) # 1 = attach, 0 = detach
+ if (not devices or op) and i < ramdisks:
+ i += 1
+ devname = "/dev/hda%d" % i
+ phy = "/dev/ram%d" % i
+ print "Attaching %s to %s" % (devname, phy)
+ status, msg = attach( phy, devname )
+ if status:
+ FAIL(msg)
+ else:
+ devices.append(devname)
+
+ elif devices:
+ devname = random.choice(devices)
+ devices.remove(devname)
+ print "Detaching %s" % devname
+ status, msg = dettach(devname)
+ if status:
+ FAIL(msg)
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/block-create/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,532 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/block-create/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-create
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_block_attach_device_pos.test \
+ 02_block_attach_file_device_pos.test \
+ 04_block_attach_device_repeatedly_pos.test \
+ 05_block_attach_and_dettach_device_repeatedly_pos.test \
+ 06_block_attach_baddomain_neg.test \
+ 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test \
+ 09_block_attach_and_dettach_device_check_data_pos.test
+
+DISABLED =
+XFAIL_TESTS = 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-create/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-create/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,32 @@
+
+SUBDIRS =
+
+TESTS = 01_block_attach_device_pos.test \
+ 02_block_attach_file_device_pos.test \
+ 04_block_attach_device_repeatedly_pos.test \
+ 05_block_attach_and_dettach_device_repeatedly_pos.test \
+ 06_block_attach_baddomain_neg.test \
+ 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test \
+ 09_block_attach_and_dettach_device_check_data_pos.test
+
+DISABLED =
+
+XFAIL_TESTS = 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test
+
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-create/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-create/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,532 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-create
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_block_attach_device_pos.test \
+ 02_block_attach_file_device_pos.test \
+ 04_block_attach_device_repeatedly_pos.test \
+ 05_block_attach_and_dettach_device_repeatedly_pos.test \
+ 06_block_attach_baddomain_neg.test \
+ 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test \
+ 09_block_attach_and_dettach_device_check_data_pos.test
+
+DISABLED =
+XFAIL_TESTS = 07_block_attach_baddevice_neg.test \
+ 08_block_attach_bad_filedevice_neg.test
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-create/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-create/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/01_block-destroy_btblock_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,46 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+domain.configAddDisk("phy:/dev/ram0", "hda1", "w")
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+ run2 = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("block device isn't attached; can't detach!")
+
+status, output = traceCommand("xm block-detach %s 769" % domain.getName(),
+ logOutput=True)
+if status != 0:
+ FAIL("block-detach returned invalid %i != 0" % status)
+
+try:
+
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+console.closeConsole()
+domain.stop()
+
+if run["return"] == 0:
+ FAIL("domU reported block device still connected!")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/02_block-destroy_rtblock_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,51 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+status, output = traceCommand("xm block-attach %s phy:/dev/ram0 hda1 w" %
domain.getName())
+if status != 0:
+ # Disabled for now, since block-attach doesn't work
+ #FAIL("Failed to attach block device")
+ pass
+
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("Failed to verify that block dev is attached")
+
+status, output = traceCommand("xm block-detach %s 769" % domain.getName())
+if status != 0:
+ FAIL("block-detach returned invalid %i != 0" % status)
+
+try:
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] == 0:
+ FAIL("block-detach failed to detach block device")
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/03_block-destroy_nonexist_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/03_block-destroy_nonexist_neg.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+# Negative Test: attempt removal from non-existent domain
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm block-detach 9999 769")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm block-detach returned invalid %i != 0" % status)
+elif where < 0:
+ FAIL("xm block-detach failed to report error for non-existent domain")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/04_block-destroy_nonattached_neg.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,30 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+#Negative Test: attempt removal of non-attached device from live domain
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+status, output = traceCommand("xm block-detach %s sda1" % domain.getId())
+
+eyecatcher1 = "Error:"
+eyecatcher2 = "Traceback"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status == 0:
+ FAIL("xm block-detach returned bad status, expected non 0, status is: %i"
% status)
+elif where2 == 0:
+ FAIL("xm block-detach returned a stack dump, expected nice error message")
+elif where1 < 0:
+ FAIL("xm block-detach returned bad output, expected Error:, output is: %s"
% output)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/05_block-destroy_byname_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,46 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+domain.configAddDisk("phy:/dev/ram0", "hda1", "w")
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+ run2 = console.runCmd("cat /proc/partitions")
+except ConsoleError, e:
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("block device isn't attached; can't detach!")
+
+status, output = traceCommand("xm block-detach %s hda1" % domain.getName(),
+ logOutput=True)
+if status != 0:
+ FAIL("block-detach returned invalid %i != 0" % status)
+
+try:
+
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+console.closeConsole()
+domain.stop()
+
+if run["return"] == 0:
+ FAIL("domU reported block device still connected!" % run["return"])
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/block-destroy/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/block-destroy/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-destroy
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_block-destroy_btblock_pos.test \
+ 02_block-destroy_rtblock_pos.test \
+ 03_block-destroy_nonexist_neg.test \
+ 04_block-destroy_nonattached_neg.test \
+ 05_block-destroy_byname_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-destroy/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-destroy/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,25 @@
+
+SUBDIRS =
+
+TESTS = 01_block-destroy_btblock_pos.test \
+ 02_block-destroy_rtblock_pos.test \
+ 03_block-destroy_nonexist_neg.test \
+ 04_block-destroy_nonattached_neg.test \
+ 05_block-destroy_byname_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-destroy/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-destroy/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-destroy
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_block-destroy_btblock_pos.test \
+ 02_block-destroy_rtblock_pos.test \
+ 03_block-destroy_nonexist_neg.test \
+ 04_block-destroy_nonattached_neg.test \
+ 05_block-destroy_byname_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-destroy/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-destroy/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-list/01_block-list_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/01_block-list_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,44 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx)
+
+# Positive Test: create domain with block attached at build time, verify list
+
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+domain.configAddDisk("phy:/dev/ram0", "hda1", "w")
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+status, output = traceCommand("xm block-list %s" % domain.getId())
+eyecatcher = "769"
+where = output.find(eyecatcher)
+if status != 0:
+ FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
+elif where < 0:
+ FAIL("Fail to list block device")
+
+#Verify the block device on DomainU
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("Failed to verify that block dev is attached on DomainU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/02_block-list_attachbd_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,48 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx)
+
+# Positive Test: create domain, attach block device, verify list
+
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+#Attach one virtual block device to domainU
+status, output = traceCommand("xm block-attach %s phy:/dev/ram0 hda1 w" %
domain.getId())
+if status != 0:
+ FAIL("Fail to attach block device")
+
+#Verify block-list on Domain0
+status, output = traceCommand("xm block-list %s" % domain.getId())
+eyecatcher = "769"
+where = output.find(eyecatcher)
+if status != 0:
+ FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
+elif where < 0 :
+ FAIL("Fail to list block device")
+
+#Verify attached block device on DomainU
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("Failed to verify that block dev is attached on DomainU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/03_block-list_anotherbd_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Positive Test: create domain with block attach, attach another, verify both
in list
+
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+domain.configAddDisk("phy:/dev/ram0", "hda1", "w")
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+status, output = traceCommand("xm block-list %s" % domain.getId())
+if status != 0:
+ FAIL("Fail to list block device")
+
+#Add another virtual block device to the domain
+status, output = traceCommand("xm block-attach %s phy:/dev/ram1 hda2 w" %
domain.getId())
+if status != 0:
+ FAIL("Fail to attach block device")
+
+#Verify block-list on Domain0
+status, output = traceCommand("xm block-list %s" % domain.getId())
+eyecatcher1 = "769"
+eyecatcher2 = "770"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status != 0:
+ FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
+elif (where1 < 0) and (where2 < 0):
+ FAIL("Fail to list all block devices after attaching another block device")
+
+#Verify attached block device on DomainU
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ console.sendInput("input")
+ run = console.runCmd("cat /proc/partitions | grep hda1;cat
/proc/partitions | grep hda2")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("Failed to verify that block dev is attached on DomainU")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-list/04_block-list_nodb_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/04_block-list_nodb_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,28 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx)
+
+# Positive Test: attempt list of domain wtih no block devices
+
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print e.extra
+ FAIL("Unable to create domain")
+
+status, output = traceCommand("xm block-list %s" % domain.getId())
+if status != 0:
+ FAIL("xm block-list returned bad status, expected 0, status is %i" %
status)
+
+if USE_BLKDEV_FOR_ROOT:
+ SKIP("Using block device for root, so this case does not apply")
+
+if output != "":
+ FAIL("xm block-list should not list anything for domain with no block
devices")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/block-list/05_block-list_nonexist_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/05_block-list_nonexist_neg.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+# Negative Test: attempt list of non-existent domain
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm block-list 9999")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm block-list returned invalid %i != 0" % status)
+elif where < 0:
+ FAIL("xm block-list failed to report error for non-existent domain")
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/block-list/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/block-list/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-list
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_block-list_pos.test \
+ 02_block-list_attachbd_pos.test \
+ 03_block-list_anotherbd_pos.test \
+ 04_block-list_nodb_pos.test \
+ 05_block-list_nonexist_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-list/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-list/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/block-list/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,25 @@
+
+SUBDIRS =
+
+TESTS = 01_block-list_pos.test \
+ 02_block-list_attachbd_pos.test \
+ 03_block-list_anotherbd_pos.test \
+ 04_block-list_nodb_pos.test \
+ 05_block-list_nonexist_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/block-list/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/block-list/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/block-list
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_block-list_pos.test \
+ 02_block-list_attachbd_pos.test \
+ 03_block-list_anotherbd_pos.test \
+ 04_block-list_nodb_pos.test \
+ 05_block-list_nonexist_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/block-list/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/block-list/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/console/01_console_badopt_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/console/01_console_badopt_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,21 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Negative Tests:
+# Test console command with non existent option in the command line.
+# Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm console -x")
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm console returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm console didn't report error on bad argument")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/console/02_console_baddom_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/console/02_console_baddom_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,27 @@
+#!/usr/bin/python
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Negative Tests:
+# Test for attempting to connect to non existent domname, domid. Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm console 5000")
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm console returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm console failed to report error on bad domid")
+
+status, output = traceCommand("xm console NON_EXIST")
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm console returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm console failed to report error on bad domname")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/console/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/console/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/console/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/console
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_console_badopt_neg.test \
+ 02_console_baddom_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/console/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/console/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/console/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/console/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,22 @@
+
+SUBDIRS =
+
+TESTS = 01_console_badopt_neg.test \
+ 02_console_baddom_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/console/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/console/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/console
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_console_badopt_neg.test \
+ 02_console_baddom_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/console/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/console/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/01_create_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/01_create_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,57 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+if int(getInfo("free_memory")) < domain.getMem():
+ SKIP("This test needs %i MB of free memory (%i MB avail)" %
+ (domain.getMem(), int(getInfo("free_memory"))))
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("input")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+# Save a transcript for human review
+saveLog(console.getHistory())
+
+# Check the output of 'ls'
+
+if not re.search("proc", run["output"]):
+ if verbose:
+ print run["output"]
+ FAIL("'ls' output looks wrong (didn't see /proc)")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/02_create_noparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/02_create_noparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm create")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm create returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm create failed to report error on missing args")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/03_create_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/03_create_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,19 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test description:
+# Negative Test:
+# Test for creating domain with non existent option in the command line.
+# Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm create -x")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm create failed to report error on bad arg")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/04_create_conflictname_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/04_create_conflictname_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,41 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Negative Test:
+# Test for creating domains with same name. Verify fail.
+
+import sys
+import re
+
+from XmTestLib import *
+
+# Create a domain with name "default" (default XmTestDomain, with our ramdisk)
+domain1 = XmTestDomain("default")
+
+#start it
+try:
+ domain1.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain1 because:"
+ print e.extra
+ FAIL(str(e))
+
+# Create second domain with same name "default"
+domain2 = XmTestDomain("default")
+
+#start it
+eyecatcher = "Pass"
+try:
+ domain2.start()
+except DomainError, e:
+ eyecatcher = "Fail"
+ # Stop the domain1 (nice shutdown)
+ domain1.stop()
+
+if eyecatcher != "Fail":
+ domain2.stop()
+ FAIL("xm create let me create a duplicate-named domain!")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/05_create_noroot_noram_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/05_create_noroot_noram_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,26 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test description:
+# Negative Test:
+# Test for creating domain with no ramdisk and no root. Verify fail.
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+status, output = traceCommand("xm create /dev/null name=NOROOT memory=64
kernel=%s" % getDefaultKernel())
+
+# sleep a while to wait for the kernel fails to mount root and NOROOT
+# goes away from the xm list
+time.sleep(15)
+
+eyecatcher = "NOROOT"
+status, output = traceCommand("xm list")
+where = output.find(eyecatcher)
+if where != -1 :
+ FAIL("xm create test05 passed with no root and no ramdisk. Expected
result: Fail.")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/06_create_mem_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/06_create_mem_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,65 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Negative Tests:
+# Test 1: Test for creating domain with mem=0. Verify fail
+# Test 2: Test for creating domain with mem>sys_mem. Verify fail
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+rdpath = os.environ.get("RD_PATH")
+if not rdpath:
+ rdpath = "../ramdisk"
+
+# Test 1: create a domain with mem=0
+opts1 = {
+ "name" : "default",
+ "memory" : 0,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : rdpath + "/initrd.img",
+ }
+
+domain1=XenDomain(opts1)
+
+try:
+ domain1.start()
+except DomainError, e:
+ eyecatcher1 = "Fail"
+
+if eyecatcher1 != "Fail":
+ domain1.stop()
+ FAIL("xm create let me create a domain with 0 memory")
+
+
+# Test 2: create a domain with mem>sys_mem
+
+mem = int(getInfo("free_memory"))
+extreme_mem = str(mem + 100)
+
+opts2= {
+ "name" : "default",
+ "memory" : extreme_mem,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : rdpath + "/initrd.img",
+ }
+
+domain2=XenDomain(opts2)
+
+try:
+ domain2.start()
+except DomainError, e:
+ eyecatcher2 = "Fail"
+
+if eyecatcher2 != "Fail":
+ domain2.stop()
+ FAIL("xm create let me create a domain with mem > sys_mem")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/07_create_mem64_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/07_create_mem64_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Positive Test
+# Test for creating domain with mem=64.
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+rdpath = os.environ.get("RD_PATH")
+if not rdpath:
+ rdpath = "../ramdisk"
+
+#get current free memory info
+mem = int(getInfo("free_memory"))
+if mem < 64:
+ SKIP("This test needs 64 MB of free memory (%i MB avail)" % mem)
+
+#create a domain with mem=64
+opts = {
+ "name" : "MEM64",
+ "memory" : 64,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : rdpath + "/initrd.img",
+ }
+
+domain_mem64=XenDomain(opts)
+
+#start it
+try:
+ domain_mem64.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain_mem64 because:"
+ print e.extra
+ FAIL(str(e))
+
+#verify it is running with 64MB mem
+
+eyecatcher1 = str(isDomainRunning(domain_mem64.getName()))
+if eyecatcher1 != "True":
+ FAIL("Failed to verify that a 64MB domain started")
+
+eyecatcher2 = getDomMem(domain_mem64.getName())
+if eyecatcher2 != 64:
+ FAIL("Started domain with 64MB, but it got %i MB" % eyecatcher2)
+
+#stop the domain (nice shutdown)
+domain_mem64.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/08_create_mem128_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/08_create_mem128_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Positive Test
+# Test for creating domain with mem=.
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+rdpath = os.environ.get("RD_PATH")
+if not rdpath:
+ rdpath = "../ramdisk"
+
+#get current free memory info
+mem = int(getInfo("free_memory"))
+if mem < 128:
+ SKIP("This test needs 128 MB of free memory (%i MB avail)" % mem)
+
+#create a domain with mem=128
+opts = {
+ "name" : "MEM128",
+ "memory" : 128,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : rdpath + "/initrd.img",
+ }
+
+domain_mem128=XenDomain(opts)
+
+#start it
+try:
+ domain_mem128.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain_mem128 because:"
+ print e.extra
+ FAIL(str(e))
+
+#verify it is running with 128MB mem
+
+eyecatcher1 = str(isDomainRunning(domain_mem128.getName()))
+if eyecatcher1 != "True":
+ FAIL("Failed to verify that a 128MB domain started")
+
+eyecatcher2 = getDomMem(domain_mem128.getName())
+if eyecatcher2 != 128:
+ FAIL("Started domain with 128MB, but it got %i MB" % eyecatcher2)
+
+#stop the domain (nice shutdown)
+domain_mem128.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/09_create_mem256_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/09_create_mem256_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,56 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test Description:
+# Positive Test
+# Test for creating domain with mem=256.
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+rdpath = os.environ.get("RD_PATH")
+if not rdpath:
+ rdpath = "../ramdisk"
+
+#get current free memory info
+mem = int(getInfo("free_memory"))
+if mem < 256:
+ SKIP("This test needs 256 MB of free memory (%i MB avail)" % mem)
+
+#create a domain with mem=256
+opts = {
+ "name" : "MEM256",
+ "memory" : 256,
+ "kernel" : getDefaultKernel(),
+ "root" : "/dev/ram0",
+ "ramdisk" : rdpath + "/initrd.img",
+ }
+
+domain_mem256=XenDomain(opts)
+
+#start it
+try:
+ domain_mem256.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain_mem256 because:"
+ print e.extra
+ FAIL(str(e))
+
+#verify it is running with 256MB mem
+
+eyecatcher1 = str(isDomainRunning(domain_mem256.getName()))
+if eyecatcher1 != "True":
+ FAIL("Failed to verify that a 256MB domain started")
+
+eyecatcher2 = getDomMem(domain_mem256.getName())
+if eyecatcher2 != 256:
+ FAIL("Started domain with 256MB, but it got %i MB" % eyecatcher2)
+
+#stop the domain (nice shutdown)
+domain_mem256.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/10_create_fastdestroy.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/10_create_fastdestroy.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,43 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import re
+
+#
+# Check to see if the output resembles the
+# "No such process error"
+#
+def check_for_NSP_error(output):
+ if re.search("XendError.*No such process", output):
+ return "Bugzilla bug #234"
+ else:
+ return None
+
+def check_for_DUP_error(output):
+ if re.search("Error.*already exists\!", output):
+ return "Xend reported duplicate domain (stale state?)"
+ else:
+ return None
+
+i = 0
+
+for i in range(0,50):
+ domain = XmTestDomain("testdomain")
+ try:
+ domain.startNow()
+ except DomainError,e:
+ print "Failed: " + e.extra
+ NSPerror = check_for_NSP_error(e.extra)
+ DUPerror = check_for_DUP_error(e.extra)
+ if NSPerror:
+ FAIL(NSPerror)
+ elif DUPerror:
+ FAIL(DUPerror)
+ else:
+ FAIL("xm create returned invalid status: %i" % e.errorcode)
+ domain.destroy()
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/11_create_concurrent_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/11_create_concurrent_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,74 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Authors: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import time
+import random
+
+MIN_DOMS = 10
+MAX_DOMS = 50
+MEM_PER_DOM = 16
+
+domains = []
+console = []
+
+free_mem = int(getInfo("free_memory"))
+
+NUM_DOMS = free_mem / MEM_PER_DOM
+
+if NUM_DOMS < MIN_DOMS:
+ SKIP("Need %i MB of RAM to start %i@%iMB domains! (%i MB avail)" %
+ (MIN_DOMS * MEM_PER_DOM, MIN_DOMS, MEM_PER_DOM,
+ free_mem))
+
+if NUM_DOMS > MAX_DOMS:
+ if verbose:
+ print "*** %i doms is too many: capping at %i" % (NUM_DOMS, MAX_DOMS)
+ NUM_DOMS = MAX_DOMS
+
+if verbose:
+ print "Watch out! I'm trying to create %i DomUs!" % NUM_DOMS
+
+for d in range(0, NUM_DOMS):
+ dom = XmTestDomain(name="11_create_%i" % d,
+ extraOpts={"memory":str(MEM_PER_DOM)})
+
+ try:
+ dom.start()
+ except DomainError, e:
+ if verbose:
+ print str(e)
+ FAIL("[%i] Failed to create domain" % d)
+
+ try:
+ cons = XmConsole(dom.getName())
+ cons.sendInput("foo")
+ cons.runCmd("ls")
+ except ConsoleError, e:
+ FAIL("[%i] Failed to attach console to %s" % (d, dom.getName()))
+
+ domains.append(dom)
+ console.append(cons)
+
+ if verbose:
+ print "[%i] Started %s" % (d, dom.getName())
+
+
+# If we make it here, we will test several of the DomUs consoles
+
+for i in range(0,5):
+ c = random.randint(0, NUM_DOMS-1)
+
+ if verbose:
+ print "Testing console of %s" % domains[c].getName()
+
+ try:
+ run = console[c].runCmd("ls")
+ except ConsoleError, e:
+ FAIL(str(e))
+
+ if run["return"] != 0:
+ FAIL("'ls' returned invalid %i != 0" % run["return"])
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/12_create_concurrent_stress_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/12_create_concurrent_stress_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,59 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Authors: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import time
+
+DOMS=2
+MEM=32
+DUR=60
+
+domains = []
+
+for i in range(0,DOMS):
+ dom = XmTestDomain(extraOpts={"memory" : str(MEM)})
+
+ try:
+ dom.start()
+ except DomainError, e:
+ if verbose:
+ print str(e)
+ FAIL("Failed to start %s" % dom.getName())
+
+ try:
+ cons = XmConsole(dom.getName())
+ cons.sendInput("foo")
+ except ConsoleError, e:
+ FAIL(str(e))
+
+ if verbose:
+ print "[%i/%i] Started %s" % (i, DOMS, dom.getName())
+
+ domains.append([dom, cons])
+
+# Started DOMS domains, now we put them to work
+
+for d, c in domains:
+ if verbose:
+ print "Starting task on %s" % d.getName()
+ c.sendInput("gzip -c </dev/zero >/dev/null &\n")
+
+if verbose:
+ print "Waiting %i seconds..." % DUR
+
+time.sleep(DUR)
+
+for d, c in domains:
+
+ if verbose:
+ print "Testing domain %s..." % d.getName()
+
+ run = c.runCmd("ls")
+
+ if run["return"] != 0:
+ FAIL("Domain %s didn't survive!" % d.getName())
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/13_create_multinic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/13_create_multinic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,23 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+for i in range(0,10):
+ domain = XmTestDomain(extraOpts={"nics":"%i" % i})
+
+ try:
+ domain.start()
+ except DomainError, e:
+ FAIL("(%i nics) " % i + str(e))
+
+ try:
+ console = XmConsole(domain.getName())
+ console.sendInput("input")
+ console.runCmd("ls")
+ except ConsoleError, e:
+ FAIL("(%i nics) Console didn't respond: probably crashed!" % i)
+
+ domain.destroy()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/create/14_create_blockroot_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/14_create_blockroot_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,48 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Authors: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import os
+
+CONF_FILE = "/tmp/14_create_blockroot_pos.conf"
+
+rdpath = os.path.abspath(os.environ.get("RD_PATH"))
+
+# status, output = traceCommand("losetup -f %s" % rdpath)
+# if status != 0:
+# FAIL("Unable to get a free loop device")
+#
+# if verbose:
+# print "Using %s" % output
+
+opts = {"memory" : "64",
+ "root" : "/dev/hda1",
+ "name" : "14_create_blockroot",
+ "kernel" : getDefaultKernel() }
+
+domain = XenDomain(opts=opts)
+
+domain.configAddDisk("file:%s/initrd.img" % rdpath, "hda1", "w")
+
+try:
+ domain.start()
+except DomainError, e:
+ FAIL(str(e))
+
+waitForBoot()
+
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+# console.debugMe = True
+ console.sendInput("foo")
+ run = console.runCmd("ls")
+
+except ConsoleError, e:
+ saveLog(console.getHistory())
+ FAIL(str(e))
+
+if run["return"] != 0:
+ FAIL("DomU 'ls' failed")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/create/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,535 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/create/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/create
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_create_basic_pos.test \
+ 02_create_noparm_neg.test \
+ 03_create_badparm_neg.test \
+ 04_create_conflictname_neg.test \
+ 06_create_mem_neg.test \
+ 07_create_mem64_pos.test \
+ 08_create_mem128_pos.test \
+ 09_create_mem256_pos.test \
+ 10_create_fastdestroy.test \
+ 11_create_concurrent_pos.test \
+ 12_create_concurrent_stress_pos.test \
+ 13_create_multinic_pos.test \
+ 14_create_blockroot_pos.test
+
+DISABLED_TESTS = 05_create_noroot_noram_neg.test
+XFAIL_TESTS = 13_create_multinic_pos.test
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/create/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/create/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/create/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,36 @@
+SUBDIRS =
+
+TESTS = 01_create_basic_pos.test \
+ 02_create_noparm_neg.test \
+ 03_create_badparm_neg.test \
+ 04_create_conflictname_neg.test \
+ 06_create_mem_neg.test \
+ 07_create_mem64_pos.test \
+ 08_create_mem128_pos.test \
+ 09_create_mem256_pos.test \
+ 10_create_fastdestroy.test \
+ 11_create_concurrent_pos.test \
+ 12_create_concurrent_stress_pos.test \
+ 13_create_multinic_pos.test \
+ 14_create_blockroot_pos.test
+
+
+DISABLED_TESTS = 05_create_noroot_noram_neg.test
+
+XFAIL_TESTS = 13_create_multinic_pos.test
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/create/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,535 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/create
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_create_basic_pos.test \
+ 02_create_noparm_neg.test \
+ 03_create_badparm_neg.test \
+ 04_create_conflictname_neg.test \
+ 06_create_mem_neg.test \
+ 07_create_mem64_pos.test \
+ 08_create_mem128_pos.test \
+ 09_create_mem256_pos.test \
+ 10_create_fastdestroy.test \
+ 11_create_concurrent_pos.test \
+ 12_create_concurrent_stress_pos.test \
+ 13_create_multinic_pos.test \
+ 14_create_blockroot_pos.test
+
+DISABLED_TESTS = 05_create_noroot_noram_neg.test
+XFAIL_TESTS = 13_create_multinic_pos.test
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/create/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/create/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/create/log
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/create/log Mon Nov 7 11:53:38 2005
@@ -0,0 +1,14 @@
+-- BEGIN XmTest Log @Fri Oct 28 13:00:55 PDT 2005
+*input
+
+
+BusyBox v1.01 (2005.10.27-17:34+0000) Built-in shell (ash)
+Enter 'help' for a list of built-in commands.
+
+-sh: can't access tty; job control turned off
+*ls
+CVS etc linuxrc opt sbin var
+bin home lost+found proc tmp
+dev lib mnt root usr
+
+-- END XmTest Log
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/01_destroy_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/01_destroy_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,48 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Run 'ls'
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Check the output of 'ls'
+if not re.search("proc", run["output"]):
+ FAIL("'ls' output looks wrong (Didn't see proc)")
+
+# destroy domain - positive test
+status, output = traceCommand("xm destroy %s" % domain.getName())
+if status != 0:
+ FAIL("xm destroy returned invalud %i != 0" % status)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/02_destroy_noparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/02_destroy_noparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm destroy")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm destroy returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm destroy failed to report error for missing arg")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/03_destroy_nonexist_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/03_destroy_nonexist_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm destroy -x")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm destroy returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm destroy failed to report error for bad arg")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/04_destroy_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/04_destroy_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm destroy 6666")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm destroy returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm destroy failed to report error for bad domid")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/05_destroy_byid_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/05_destroy_byid_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,34 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+# Li Ge <lge@xxxxxxxxxx>
+
+# Positive Test:
+# Test Description:
+# 1. Create a domain
+# 2. Attach a console to the domain.
+# 3. Destroy the domain by id
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# destroy domain - positive test
+status, output = traceCommand("xm destroy %s" % domain.getId())
+if status != 0:
+ FAIL("xm destroy returned invalid %i != 0" % status)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/06_destroy_dom0_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/06_destroy_dom0_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm destroy 0")
+if status == 0:
+ FAIL("xm destroy returned bad status, expected non 0, status is: %i" %
status)
+elif not re.search("Error", output):
+ FAIL("xm destroy returned bad output, expected Error:, output is: %s" %
output)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/destroy/07_destroy_stale_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/07_destroy_stale_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,145 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+#
+# 10 start a domain
+# 20 destroy it
+# 30 try next xm command
+# 40 goto 10
+
+from XmTestLib import *
+
+import re
+
+def test_mem_set(name):
+ status, output = traceCommand("xm mem-set %s 32" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("mem-set worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("mem-set failed to report error after destroy!")
+
+def test_pause(name):
+ status, output = traceCommand("xm pause %s" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("pause worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("pause failed to report error after destroy!")
+
+def test_unpause(name):
+ status, output = traceCommand("xm unpause %s" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("unpause worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("unpause failed to report error after destroy!")
+
+def test_reboot(name):
+ status, output = traceCommand("xm reboot %s" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("reboot worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("reboot failed to report error after destroy!")
+
+def test_save(name):
+ status, output = traceCommand("xm save %s /tmp/foo" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("save worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("save failed to report error after destroy!")
+
+def test_block_list(name):
+ status, output = traceCommand("xm block-list %s" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("block-list worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("block-list failed to report error after destroy!")
+
+def test_shutdown(name):
+ status, output = traceCommand("xm shutdown %s" % name, logOutput=True)
+
+ if status == 0:
+ FAIL("shutdown worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("shutdown failed to report error after destroy!")
+
+def test_domname(name):
+ status, output = traceCommand("xm domname %s" % name)
+
+ if status == 0:
+ FAIL("domname worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("domname failed to report error after destroy!")
+
+def test_domid(name):
+ status, output = traceCommand("xm domid %s" % name)
+
+ if status == 0:
+ FAIL("domid worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("domid failed to report error after destroy!")
+
+def test_destroy(name):
+ status, output = traceCommand("xm destroy %s" % name)
+
+ if status == 0:
+ FAIL("destroy worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("destroy failed to report error after destroy!")
+
+def test_sysrq(name):
+ status, output = traceCommand("xm sysrq %s s" % name)
+
+ if status == 0:
+ FAIL("sysrq worked after domain destroy!")
+ if not re.search("[Ee]rror", output):
+ FAIL("sysrq failed to report error after destroy!")
+
+def runTests(tests, wait):
+ for test in tests:
+ domain = XmTestDomain()
+
+ # Create a domain
+
+ try:
+ if wait:
+ domain.start()
+ else:
+ domain.startNow()
+ except DomainError, e:
+ FAIL(str(e))
+
+
+ if wait:
+ # Attach a console and make sure it's live
+ try:
+ console = XmConsole(domain.getName())
+ console.sendInput("foo")
+ console.runCmd("ls")
+ except ConsoleError, e:
+ FAIL(str(e))
+
+ # Destroy it
+
+ domain.destroy()
+
+ # Run test
+
+ test(domain.getName())
+
+tests = [test_mem_set, test_pause, test_unpause, test_reboot, test_save,
+ test_block_list, test_shutdown, test_domid, test_domname]
+
+if verbose:
+ print "Running stale tests (nice mode)"
+runTests(tests, True)
+
+if verbose:
+ print "Running stale tests (mean mode)"
+runTests(tests, False)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/destroy/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,528 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/destroy/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/destroy
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_destroy_basic_pos.test \
+ 02_destroy_noparm_neg.test \
+ 03_destroy_nonexist_neg.test \
+ 04_destroy_badparm_neg.test \
+ 05_destroy_byid_pos.test \
+ 06_destroy_dom0_neg.test \
+ 07_destroy_stale_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/destroy/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/destroy/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/destroy/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,27 @@
+SUBDIRS =
+
+TESTS = 01_destroy_basic_pos.test \
+ 02_destroy_noparm_neg.test \
+ 03_destroy_nonexist_neg.test \
+ 04_destroy_badparm_neg.test \
+ 05_destroy_byid_pos.test \
+ 06_destroy_dom0_neg.test \
+ 07_destroy_stale_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/destroy/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/destroy/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,528 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/destroy
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_destroy_basic_pos.test \
+ 02_destroy_noparm_neg.test \
+ 03_destroy_nonexist_neg.test \
+ 04_destroy_badparm_neg.test \
+ 05_destroy_byid_pos.test \
+ 06_destroy_dom0_neg.test \
+ 07_destroy_stale_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/destroy/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/destroy/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/dmesg/01_dmesg_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/dmesg/01_dmesg_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,15 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm dmesg")
+if status != 0:
+ FAIL("xm dmesg returned invalid %i != 0" % status)
+elif not re.search("\(XEN\)", output):
+ FAIL("xm dmesg didn't output and (XEN) lines")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/dmesg/02_dmesg_basic_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/dmesg/02_dmesg_basic_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm dmesg -x")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm dmesg returned invalid %i != 0" % status)
+elif where == 1:
+ FAIL("xm dmesg failed to report error for bad arg")
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/dmesg/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/dmesg/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/dmesg/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/dmesg
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_dmesg_basic_pos.test 02_dmesg_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/dmesg/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/dmesg/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/dmesg/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/dmesg/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+SUBDIRS =
+
+TESTS = 01_dmesg_basic_pos.test 02_dmesg_basic_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/dmesg/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/dmesg/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/dmesg
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_dmesg_basic_pos.test 02_dmesg_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/dmesg/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/dmesg/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/domid/01_domid_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domid/01_domid_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm domid Domain-0")
+if status != 0:
+ FAIL("domid(Domain-0) returned invalid %i != 0" % status)
+elif output != "0":
+ if verbose:
+ print output
+ FAIL("domid(Domain-0) failed to report domid 0")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/domid/02_domid_basic_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domid/02_domid_basic_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,15 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm domid non_existent_domain")
+if status == 0:
+ FAIL("domid(non_existent_domain) returned invalid %i != 0" % status)
+elif not re.search("Error", output):
+ FAIL("domid(non_existent_domain) failed to report error")
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domid/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domid/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/domid/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/domid
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_domid_basic_pos.test 02_domid_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/domid/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/domid/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domid/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domid/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+SUBDIRS =
+
+TESTS = 01_domid_basic_pos.test 02_domid_basic_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domid/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domid/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/domid
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_domid_basic_pos.test 02_domid_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/domid/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/domid/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/domname/01_domname_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domname/01_domname_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm domname 0")
+if status != 0:
+ FAIL("domname(0) returned invalid %i != 0" % status)
+elif output != "Domain-0":
+ if verbose:
+ print output
+ FAIL("domname(0) failed to return Domain-0 for domid 0")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/domname/02_domname_basic_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domname/02_domname_basic_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,15 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm domname 1492")
+if status == 0:
+ FAIL("domname(1492) returned invalid: %i != 0" % status)
+elif not re.search("Error", output):
+ FAIL("domname(1492) failed to report error for invalid domid")
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domname/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domname/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/domname/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/domname
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_domname_basic_pos.test 02_domname_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/domname/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/domname/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domname/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domname/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+SUBDIRS =
+
+TESTS = 01_domname_basic_pos.test 02_domname_basic_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/domname/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/domname/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/domname
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_domname_basic_pos.test 02_domname_basic_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/domname/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/domname/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/enforce_dom0_cpus/01_enforce_dom0_cpus_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/enforce_dom0_cpus/01_enforce_dom0_cpus_basic_pos.py
Mon Nov 7 11:53:38 2005
@@ -0,0 +1,90 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Authors: Dan Smith <danms@xxxxxxxxxx>
+# Ryan Harper <ryanh@xxxxxxxxxx>
+
+# 1) Make sure we have a multi cpu system
+# 2) clone standard config (/etc/xen/xend-config.sxp)
+# 3) modify clone with enforce_dom0_cpus=X
+# 4) restart xend with modified config
+# 5) check /proc/cpuinfo for cpu count
+# 6) check xm list -v to see that only 1 cpu is online for dom0
+# 7) Restart xend with default config
+
+import sys
+import re
+import time
+import os
+
+# what value should dom0_cpus be enforced?
+enforce_dom0_cpus=1
+
+from XmTestLib import *
+
+check_status = 1
+max_tries = 10
+
+# 1) Make sure we have a multi cpu system
+
+if smpConcurrencyLevel() <= 1:
+ print "*** NOTE: This machine does not have more than one physical"
+ print " or logical cpu. The vcpu-disable test cannot be run!"
+ SKIP("Host not capable of running test")
+
+# 2) clone standard config (/etc/xen/xend-config.sxp)
+# 3) modify clone with enforce_dom0_cpus=1
+old_config="/etc/xen/xend-config.sxp"
+new_config ="/tmp/xend-config.sxp"
+cmd = "sed -e 's,dom0-cpus 0,dom0-cpus %s,' %s > %s" % (enforce_dom0_cpus,
+ old_config,
+ new_config)
+status, output = traceCommand(cmd)
+if check_status and status != 0:
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+
+# 4) restart xend with new config
+os.putenv("XEND_CONFIG", "/tmp/xend-config.sxp")
+status = restartXend()
+if check_status and status != 0:
+ ns, no = restartXend()
+ if ns != 0:
+ FAIL("Restarting xend isn't working: something is WAY broken")
+ else:
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+# 5) check /proc/cpuinfo for cpu count
+cmd = "grep \"^processor\" /proc/cpuinfo | wc -l"
+status, output = traceCommand(cmd)
+if check_status and status != 0:
+ os.unsetenv("XEND_CONFIG")
+ restartXend()
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+if output != str(enforce_dom0_cpus):
+ os.unsetenv("XEND_CONFIG")
+ restartXend()
+ FAIL("/proc/cpuinfo says xend didn't enforce dom0_cpus (%s != %s)"
%(output, enforce_dom0_cpus))
+
+# 7) count number of online cpus and see that it matches enforce value
+dom0vcpus = getVcpuInfo("Domain-0")
+num_online = len(filter(lambda x: x >= 0, dom0vcpus.values()))
+if num_online != enforce_dom0_cpus:
+ os.unsetenv("XEND_CONFIG")
+ restartXend()
+ FAIL("xm says xend didn't enforce dom0_cpus (%s != %s)" %(num_online,
enforce_dom0_cpus))
+
+# restore dead processors
+for (k,v) in zip(dom0vcpus.keys(),dom0vcpus.values()):
+ if v == -1:
+ status, output = traceCommand("xm vcpu-enable 0 %s"%(k))
+ if check_status and status != 0:
+ os.unsetenv("XEND_CONFIG")
+ restartXend()
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+# Restart xend with default config
+os.unsetenv("XEND_CONFIG")
+restartXend()
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/enforce_dom0_cpus/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/enforce_dom0_cpus/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/enforce_dom0_cpus/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/enforce_dom0_cpus
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_enforce_dom0_cpus_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/enforce_dom0_cpus/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/enforce_dom0_cpus/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/enforce_dom0_cpus/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/enforce_dom0_cpus/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+
+SUBDIRS =
+
+TESTS = 01_enforce_dom0_cpus_basic_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/enforce_dom0_cpus/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/enforce_dom0_cpus/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/enforce_dom0_cpus
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_enforce_dom0_cpus_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/enforce_dom0_cpus/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/enforce_dom0_cpus/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/help/01_help_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/01_help_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm help")
+eyecatcher = "Usage:"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm help: didn't see the usage string")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/help/02_help_basic_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/02_help_basic_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm")
+eyecatcher = "Usage:"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm: didn't display usage when given no arguments")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/help/03_help_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/03_help_badparm_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm -x")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm failed to report error for bad arg")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/help/04_help_long_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/04_help_long_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm help --long")
+#print output
+
+eyecatcher = "xm full list of subcommands:"
+where = output.find(eyecatcher)
+if where == -1:
+ FAIL("xm help --long failed to show long listing")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/help/05_help_nonroot_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/05_help_nonroot_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Copyright (C) XenSource Ltd, 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+# Author: Ewan Mellor <ewan@xxxxxxxxxxxxx>
+
+from XmTestLib import *
+
+becomeNonRoot()
+
+status, output = traceCommand("xm help")
+eyecatcher = "Usage:"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm help: didn't see the usage string")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/help/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/help/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/help
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_help_basic_pos.test \
+ 02_help_basic_neg.test \
+ 03_help_badparm_neg.test \
+ 04_help_long_pos.test \
+ 05_help_nonroot_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/help/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/help/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/help/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,25 @@
+SUBDIRS =
+
+TESTS = 01_help_basic_pos.test \
+ 02_help_basic_neg.test \
+ 03_help_badparm_neg.test \
+ 04_help_long_pos.test \
+ 05_help_nonroot_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/help/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/help/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,526 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/help
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_help_basic_pos.test \
+ 02_help_basic_neg.test \
+ 03_help_badparm_neg.test \
+ 04_help_long_pos.test \
+ 05_help_nonroot_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/help/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/help/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/info/01_info_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/info/01_info_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,11 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+status, output = traceCommand("xm info")
+
+if status != 0:
+ FAIL("xm info returned %i != 0" % status)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/info/02_info_compiledata_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/info/02_info_compiledata_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,43 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import re;
+
+from XmTestLib import *
+
+status, output = traceCommand("xm info")
+
+output = re.sub(" +", " ", output)
+
+lines = output.split("\n")
+
+map = {}
+
+for line in lines:
+ pieces = line.split(" : ", 1)
+
+ if len(pieces) < 2:
+ FAIL("Found invalid line: [%s]" % line)
+ else:
+ map[pieces[0]] = pieces[1]
+
+for field in ["cores_per_socket", "threads_per_core", "cpu_mhz",
+ "memory", "free_memory", "xen_major", "xen_minor"]:
+ val = map[field]
+ if not val.isdigit():
+ FAIL("Numeric field %s not all-numbers: %s" % (field, val))
+
+# Check cc_compiler
+if not re.match("gcc version", map["cc_compiler"]):
+ FAIL("Bad cc_compiler field: %s" % map["cc_compiler"])
+
+# Check cc_compile_by
+if not re.match("[A-z0-9_]+", map["cc_compile_by"]):
+ FAIL("Bad cc_compile_by field: %s" % map["cc_compile_by"])
+
+# Check cc_compile_domain
+# --- What should it look like?
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/info/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/info/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/info/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/info
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_info_basic_pos.test \
+ 02_info_compiledata_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/info/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/info/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/info/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/info/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,22 @@
+
+SUBDIRS =
+
+TESTS = 01_info_basic_pos.test \
+ 02_info_compiledata_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/info/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/info/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/info
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_info_basic_pos.test \
+ 02_info_compiledata_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/info/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/info/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/list/01_list_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/01_list_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,14 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm list")
+if status != 0:
+ FAIL("xm list returned invalid %i != 0" % status)
+elif not re.search("Domain-0", output):
+ FAIL("xm list output invalid; didn't see Domain-0")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/list/02_list_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/02_list_badparm_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm list -x")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm list returned invalud %i != 0" % status)
+elif where > 1:
+ FAIL("xm list failed to report error for bad arg")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/list/03_list_nonexist_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/03_list_nonexist_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm list 6666")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm list returned invalid %i != 0" % status)
+elif where > 1:
+ FAIL("xm list failed to report error for invalid domid")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/list/04_list_goodparm_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/04_list_goodparm_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,34 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+
+status, output = traceCommand("xm list %s" % domain.getName())
+
+if status != 0:
+ FAIL("`xm list %s' failed with invalid status %i != 0" %
(domain.getName(), status))
+
+console.closeConsole()
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/list/05_list_long_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/05_list_long_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import re
+
+status, output = traceCommand("xm list --long")
+
+if status != 0:
+ FAIL("xm list --long returned invalid %i != 0" % status)
+
+if not re.search("\(domain", output):
+ FAIL("long listing missing any (domain ...) root!")
+
+if not re.search("\(domid 0\)", output):
+ FAIL("long listing missing (domid 0)!")
+
+if re.search("Traceback", output):
+ FAIL("long listing generated a Traceback!")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/list/06_list_nonroot.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/06_list_nonroot.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,16 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Copyright (C) XenSource Ltd, 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+# Author: Ewan Mellor <ewan@xxxxxxxxxxxxx>
+
+from XmTestLib import *
+
+becomeNonRoot()
+
+status, output = traceCommand("xm list")
+eyecatcher = "Error: Most commands need root access"
+where = output.find(eyecatcher)
+if where != 0:
+ FAIL("xm help: didn't see the root hint, saw %s" % output)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/list/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,527 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/list/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/list
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_list_basic_pos.test \
+ 02_list_badparm_neg.test \
+ 03_list_nonexist_neg.test \
+ 04_list_goodparm_pos.test \
+ 05_list_long_pos.test \
+ 06_list_nonroot.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/list/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/list/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/list/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,27 @@
+SUBDIRS =
+
+TESTS = 01_list_basic_pos.test \
+ 02_list_badparm_neg.test \
+ 03_list_nonexist_neg.test \
+ 04_list_goodparm_pos.test \
+ 05_list_long_pos.test \
+ 06_list_nonroot.test
+
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/list/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/list/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,527 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/list
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_list_basic_pos.test \
+ 02_list_badparm_neg.test \
+ 03_list_nonexist_neg.test \
+ 04_list_goodparm_pos.test \
+ 05_list_long_pos.test \
+ 06_list_nonroot.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/list/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/list/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/memmax/01_memmax_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memmax/01_memmax_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,27 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+## Description: Test xm memmax bad parameter
+
+import re
+
+from XmTestLib import *
+
+
+status, output = traceCommand("xm mem-max")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm memmax returned invalid %i == 0" % status)
+elif where < 0:
+ FAIL("xm memmax failed to report error for missing arg")
+
+
+status, output = traceCommand("xm mem-max 6666")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm memmax returned invalid %i == 0" % status)
+elif where < 0:
+ FAIL("xm memmax failed to report error for bad arg")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memmax/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memmax/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/memmax/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/memmax
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_memmax_badparm_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/memmax/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/memmax/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memmax/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memmax/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+SUBDIRS =
+
+TESTS = 01_memmax_badparm_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memmax/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memmax/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/memmax
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_memmax_badparm_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/memmax/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/memmax/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/memset/01_memset_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/01_memset_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,87 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+##
+## Description:
+## Tests that verify mem-set output and return code
+## 1) Test for xm mem-set
+## create domain,
+## verify domain and ls output,
+## mem-set in dom0,
+## verify with xm list memory change external,
+## verify with xm list memory change internal,
+##
+## Author: Woody Marvel marvel@xxxxxxxxxx
+##
+
+import sys
+import re
+import time
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName())
+ console.sendInput("input")
+ # Make sure it's up an running before we continue
+ console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# set mem-set for less than default
+cmd = "xm mem-set %s %i" % (domain.getName(), 63)
+status, output = traceCommand(cmd)
+if status != 0:
+ if verbose:
+ print "mem-set failed:"
+ print output
+ FAIL("cmd %s returned invalid %i != 0" % (cmd, status))
+
+for i in [1,2,3,4,5,6,7,8,9,10]:
+ mem = getDomMem(domain.getName())
+ if mem == 63:
+ break
+ time.sleep(1)
+
+# verify memory set externally
+mem = getDomMem(domain.getName())
+if not mem:
+ FAIL("Failed to get memory amount for domain %s" % domain.getName())
+elif mem != 63:
+ FAIL("Dom0 failed to verify 63 MB; got %i MB" % mem)
+
+# verify memory set internally
+try:
+ run = console.runCmd("cat /proc/xen/balloon | grep Current")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Check the output of 'cat /proc/xen/balloon'
+m = re.match("^Current allocation:\s+(\d+)\skB", run["output"])
+if not m:
+ FAIL("The DomU command 'cat /proc/xen/balloon' failed.")
+
+domUmem = int(m.group(1)) / 1024
+
+if domUmem != 63:
+ FAIL("DomU reported incorrect memory amount: %i MB" % (domUmem))
+
+# quiesce everything
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/memset/02_memset_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/02_memset_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,53 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Woody Marvel <marvel@xxxxxxxxxx>
+##
+## Description:
+## Test xm mem-set output and status
+## Negative Tests:
+## 1) Test xm mem_set (no parm)
+## 2) Test xm list (non existent parm)
+## 3) Test xm list (non existent domain)
+##
+##
+## Author: Woody Marvel marvel@xxxxxxxxxx
+##
+
+import re
+
+from XmTestLib import *
+
+# destroy no parm input - negative test
+status, output = traceCommand("xm mem-set")
+eyecatcher = "Error:"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm mem-set returned invalid %i == 0" % status)
+elif where > 1:
+ FAIL("xm mem-set failed to report error for missing arg")
+
+# destroy non existent parm input - negative test
+status, output = traceCommand("xm mem-set -x")
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm mem-set returned invalid %i == 0" % status)
+elif where != 0:
+ FAIL("xm mem-set failed to report error for bad arg")
+
+# destroy non existent domain - negative test
+status, output = traceCommand("xm mem-set 6666")
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm mem-set returned invalid %i == 0" % status)
+elif where != 0:
+ FAIL("xm mem-set failed to report error for invalid domid")
+
+# destroy non existent domain and memory - negative test
+status, output = traceCommand("xm mem-set 6666 64")
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm mem-set returned invalid %i != 0" % status)
+elif where != 0:
+ FAIL("xm mem-set failed to report error for invalid domid")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/memset/03_memset_random_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/03_memset_random_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,74 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import random
+import re
+
+from XmTestLib import *
+
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to start domain:"
+ print e.extra
+ FAIL(str(e))
+
+times = random.randint(10,50)
+origmem = domain.getMem()
+currmem = domain.getMem()
+
+try:
+ console = XmConsole(domain.getName())
+ console.sendInput("input")
+except ConsoleError, e:
+ FAIL(str(e))
+
+for i in range(0,times):
+ amt = random.randint(-10,10)
+
+ target = currmem + amt
+
+ # Make sure we're not going over or under
+ if target < domain.minSafeMem():
+ continue
+ if target > origmem:
+ continue
+
+ if verbose:
+ print "[%i/%i] Current: %i Target: %i" % (i, times, currmem, target)
+
+ cmd = "xm mem-set %s %i" % (domain.getName(), target)
+ status, output = traceCommand(cmd)
+
+ if status != 0:
+ if verbose:
+ print "mem-set failed:"
+ print output
+ FAIL("mem-set from %i to %i failed" % (currmem, target))
+
+ try:
+ run = console.runCmd("cat /proc/xen/balloon | grep Current");
+ except ConsoleError, e:
+ FAIL(str(e))
+
+ match = re.match("[^0-9]+([0-9]+)", run["output"])
+ if not match:
+ FAIL("Invalid domU meminfo line")
+
+ domUmem = int(match.group(1)) / 1024
+
+ currmem = target
+ actual = int(getDomInfo(domain.getName(), "Mem"))
+
+ if actual != currmem:
+ FAIL("Expected %i MB, xm reported %i MB" % (currmem, actual))
+ if domUmem != currmem:
+ FAIL("Expected %i MB, domU reported %i MB" % (currmem, domUmem))
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/memset/04_memset_smallmem_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/04_memset_smallmem_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,41 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to start domain: "
+ print e.extra
+ FAIL(str(e))
+
+try:
+ console = XmConsole(domain.getName())
+ console.sendInput("input")
+ # Make sure it's alive before we proceed
+ console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+status, output = traceCommand("xm mem-set %s %i" %
+ (domain.getName(), 15))
+
+if status != 0:
+ FAIL("xm mem-set %s %i returned invalid %i != 0" %
+ (domain.getName(), domain.minSafeMem(), status))
+
+console.setLimit(8192)
+
+try:
+ # See if this hits the byte limit
+ console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+domain.destroy()
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memset/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,525 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/memset/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/memset
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_memset_basic_pos.test \
+ 02_memset_badparm_neg.test \
+ 04_memset_smallmem_pos.test \
+ 03_memset_random_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/memset/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/memset/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memset/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,24 @@
+SUBDIRS =
+
+TESTS = 01_memset_basic_pos.test \
+ 02_memset_badparm_neg.test \
+ 04_memset_smallmem_pos.test \
+ 03_memset_random_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/memset/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/memset/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,525 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/memset
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_memset_basic_pos.test \
+ 02_memset_badparm_neg.test \
+ 04_memset_smallmem_pos.test \
+ 03_memset_random_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/memset/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/memset/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/migrate/01_migrate_localhost_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/migrate/01_migrate_localhost_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,87 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Tests for xm migrate
+# 1) Create domain, verify it's up with console
+# 2) live migrate the domain to localhost
+# 3) verify it's migrated, see that it has a new domain ID
+# 4) verify it's still working properly by running a command on it
+
+import re
+import time
+import commands
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Make sure a command succeeds
+ run = console.runCmd("ls /bin")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+old_domid = domid(domain.getName())
+
+# Migrate the domain
+try:
+ status, output = traceCommand("xm migrate -l %s localhost" %
domain.getName(),
+ timeout=90)
+except TimeoutError, e:
+ FAIL(str(e))
+
+if status != 0:
+ FAIL("xm migrate returned invalid %i != 0" % status)
+
+new_domid = domid(domain.getName())
+
+if (old_domid == new_domid):
+ FAIL("xm migrate failed, domain id is still %s" % old_domid)
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ pass
+
+# Run 'ls'
+try:
+ # Check the dmesg output on the domU
+ run = console.runCmd("ls /bin")
+except ConsoleError, e:
+ FAIL(str(e))
+
+if not re.search("chmod", run["output"]):
+ FAIL("invalid console output from ls after migration")
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/migrate/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/migrate/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/migrate/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/migrate
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_migrate_localhost_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/migrate/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/migrate/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/migrate/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/migrate/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,20 @@
+SUBDIRS =
+
+TESTS = 01_migrate_localhost_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/migrate/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/migrate/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/migrate
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_migrate_localhost_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/migrate/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/migrate/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/pause/01_pause_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/01_pause_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,73 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Tests for xm pause
+# 1) Create domain, verify it's up with console
+# 2) pause the domain
+# 3) verify it's paused by failure to connect console
+
+import time
+import commands
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Make sure a command succeeds
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Pause the domain
+status, output = traceCommand("xm pause %s" % domain.getName())
+if status != 0:
+ FAIL("xm pause returned invalid %i != 0", status)
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+try:
+ run = console.runCmd("ls")
+ #If we get here, console attached to paused domain (unexpected)
+ FAIL("console attached to supposedly paused domain")
+except ConsoleError, e:
+ pass
+
+# Close the console
+console.closeConsole()
+
+status, output = traceCommand("xm unpause %s" % domain.getName())
+if status != 0:
+ FAIL("xm unpause returned invalid %i != 0", status)
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/pause/02_pause_badopt_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/02_pause_badopt_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,32 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+status, output = traceCommand("xm pause -x %s" % domain.getName())
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ domain.destroy()
+ FAIL("xm pause returned bad status, expected non 0, status is: %i" %
status )
+elif where > 1:
+ domain.destroy()
+ FAIL("xm pause returned bad output, expected Error, output is: %s" %
output )
+
+domain.destroy()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/pause/03_pause_badname_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/03_pause_badname_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm pause NOT-EXIST" )
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm pause returned bad status, expected non 0, status is: %i" %
status )
+elif where > 1:
+ FAIL("xm pause returned bad output, expected Error, output is: %s" %
output )
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/pause/04_pause_badid_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/04_pause_badid_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Murillo F. Bernardes <mfb@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm pause 1246445" )
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm pause returned bad status, expected non 0, status is: %i" %
status )
+elif where > 1:
+ FAIL("xm pause returned bad output, expected Error, output is: %s" %
output )
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/pause/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/pause/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/pause
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_pause_basic_pos.test 02_pause_badopt_neg.test \
+ 03_pause_badname_neg.test 04_pause_badid_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/pause/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/pause/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/pause/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,22 @@
+SUBDIRS =
+
+TESTS = 01_pause_basic_pos.test 02_pause_badopt_neg.test \
+ 03_pause_badname_neg.test 04_pause_badid_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/pause/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/pause/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,523 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/pause
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_pause_basic_pos.test 02_pause_badopt_neg.test \
+ 03_pause_badname_neg.test 04_pause_badid_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/pause/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/pause/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/reboot/01_reboot_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/01_reboot_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,47 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+status, output = traceCommand("xm reboot %s" % domain.getName())
+
+if status != 0:
+ FAIL("xm reboot returned %i != 0" % status)
+
+time.sleep(15)
+
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ console.sendInput("input")
+ run = console.runCmd("uptime")
+except ConsoleError, e:
+ FAIL(str(e))
+
+console.closeConsole()
+
+domain.destroy()
+
+items = re.split(" +", run["output"])
+uptime = int(items[3])
+if uptime > 1:
+ FAIL("Uptime too large (%i > 1 minutes); domain didn't reboot")
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/reboot/02_reboot_badopt_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/02_reboot_badopt_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,32 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+status, output = traceCommand("xm reboot -x %s" % domain.getName())
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ domain.destroy()
+ FAIL("xm reboot returned invalid %i == 0" % status )
+elif where > 1:
+ domain.destroy()
+ FAIL("xm reboot failed to report error for bad arg")
+
+domain.destroy()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/reboot/03_reboot_badname_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/03_reboot_badname_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,18 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+import time
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm reboot NOT-EXIST" )
+
+eyecatcher = "Error"
+where = output.find(eyecatcher)
+if status == 0:
+ FAIL("xm reboot returned invalid %i == 0" % status )
+elif where > 1:
+ FAIL("xm reboot failed to report error for non-existent domain" )
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/reboot/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/reboot/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/reboot
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_reboot_basic_pos.test \
+ 02_reboot_badopt_neg.test \
+ 03_reboot_badname_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/reboot/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/reboot/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/reboot/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,23 @@
+
+SUBDIRS =
+
+TESTS = 01_reboot_basic_pos.test \
+ 02_reboot_badopt_neg.test \
+ 03_reboot_badname_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/reboot/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/reboot/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/reboot
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_reboot_basic_pos.test \
+ 02_reboot_badopt_neg.test \
+ 03_reboot_badname_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/reboot/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/reboot/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/restore/01_restore_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/01_restore_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,73 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+# Save a domain and attempt to restore it
+#
+# Since we don't want to depend on the fact that save/01_basic_pos.py
+# ran successfully, we try to save the domain here again
+
+import time
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Make sure the domain isn't DOA
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+console.closeConsole()
+
+# Save it out
+try:
+ s, o = traceCommand("xm save %s /tmp/test.state" % domain.getName(),
+ timeout=30)
+except TimeoutError, e:
+ FAIL(str(e))
+
+if s != 0:
+ FAIL("save command exited %i != 0" % s)
+
+# FIXME: Give the system some time to update the internal state
+traceCommand("xm list")
+
+# Make sure it's gone
+if isDomainRunning(domain.getName()):
+ FAIL("Domain still running after save!")
+
+# Let things settle
+time.sleep(2)
+
+# Restore it in
+status, output = traceCommand("xm restore /tmp/test.state",
+ timeout=30)
+if s != 0:
+ FAIL("restore command exited %i != 0" % s)
+
+# Make sure it's running
+if not isDomainRunning(domain.getName()):
+ FAIL("Restore didn't result in a running %s domain!" % domain.getName())
+
+# Make sure it's alive
+try:
+ newConsole = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL("Restored domain is dead (%s)" % str(e))
+
+newConsole.closeConsole()
+
+# This only works because the domain
+# still has the same name
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/restore/02_restore_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/02_restore_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,25 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test description:
+# Negative Test:
+# Test for restoring domain with non existent option in the command line.
+# Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm restore -x")
+eyecatcher1 = "Error:"
+eyecatcher2 = "Traceback"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status == 0:
+ FAIL("xm restore returned bad status, expected non 0, status is: %i" %
status)
+elif where2 == 0:
+ FAIL("xm restore returned a stack dump, expected nice error message")
+elif where1 > 0:
+ FAIL("xm restore returned bad output, expected Error:, output is: %s" %
output)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/restore/03_restore_badfilename_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/03_restore_badfilename_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,25 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test description:
+# Negative Test:
+# Test for restoring domain with non existent file.
+# Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm restore /tmp/NON_EXIST")
+eyecatcher1 = "Error:"
+eyecatcher2 = "Traceback"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status == 0:
+ FAIL("xm restore returned bad status, expected non 0, status is: %i" %
status)
+elif where2 == 0:
+ FAIL("xm restore returned a stack dump, expected nice error message")
+elif where1 > 0:
+ FAIL("xm restore returned bad output, expected Error:, output is: %s" %
output)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/restore/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/restore/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/restore
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_restore_basic_pos.test \
+ 02_restore_badparm_neg.test \
+ 03_restore_badfilename_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/restore/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/restore/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/restore/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,23 @@
+SUBDIRS =
+
+TESTS = 01_restore_basic_pos.test \
+ 02_restore_badparm_neg.test \
+ 03_restore_badfilename_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/restore/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/restore/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/restore
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_restore_basic_pos.test \
+ 02_restore_badparm_neg.test \
+ 03_restore_badfilename_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/restore/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/restore/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/save/01_save_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/01_save_basic_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,40 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import time
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Make sure the domain isn't DOA
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+console.closeConsole()
+
+# Save it out
+try:
+ s, o = traceCommand("xm save %s /tmp/test.state" % domain.getName(),
+ timeout=30)
+except TimeoutError, e:
+ FAIL(str(e))
+
+if s != 0:
+ FAIL("save command exited %i != 0" % s)
+
+# Make sure it's gone
+if isDomainRunning(domain.getName()):
+ FAIL("Domain still running after save!")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/save/02_save_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/02_save_badparm_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,25 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+
+# Test description:
+# Negative Test:
+# Test for saving domain with non existent option in the command line.
+# Verify fail.
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm save -x")
+eyecatcher1 = "Error:"
+eyecatcher2 = "Traceback"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status == 0:
+ FAIL("xm save returned bad status, expected non 0, status is: %i" % status)
+elif where2 == 0:
+ FAIL("xm save returned a stack dump, expected nice error message")
+elif where1 > 0:
+ FAIL("xm save returned bad output, expected Error:, output is: %s" %
output)
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/save/03_save_bogusfile_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/03_save_bogusfile_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,42 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Li Ge <lge@xxxxxxxxxx>
+# Test Description:
+# Negative Test:
+# Create a new domain. Save this domain to bogus file reference. Verify fail.
+
+import time
+
+from XmTestLib import *
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Make sure the domain isn't DOA
+try:
+ console = XmConsole(domain.getName())
+except ConsoleError, e:
+ FAIL(str(e))
+
+console.closeConsole()
+
+# Save it out
+status, output = traceCommand("xm save %s /NOWHERE/test.state" %
domain.getName())
+eyecatcher1 = "Traceback"
+eyecatcher2 = "Error:"
+where1 = output.find(eyecatcher1)
+where2 = output.find(eyecatcher2)
+if status == 0:
+ FAIL("xm save returned bad status, expected non 0, status is: %i" % status)
+elif where1 == 0:
+ FAIL("xm save returned a stack dump, expected nice error message")
+elif where2 > 0:
+ FAIL("xm save returned bad output, expected Error:, output is: %s" %
output)
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/save/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/save/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/save
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_save_basic_pos.test \
+ 02_save_badparm_neg.test \
+ 03_save_bogusfile_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/save/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/save/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/save/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,24 @@
+SUBDIRS =
+
+TESTS = 01_save_basic_pos.test \
+ 02_save_badparm_neg.test \
+ 03_save_bogusfile_neg.test
+
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/save/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/save/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/save
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_save_basic_pos.test \
+ 02_save_badparm_neg.test \
+ 03_save_bogusfile_neg.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/save/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/save/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/sedf/01_sedf_multi_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sedf/01_sedf_multi_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,28 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+sedf_opts = "20000000 5000000 0 0 0"
+
+domain = XmTestDomain(extraOpts = {"sched":"sedf"})
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+for i in range(5):
+ status, output = traceCommand("xm sched-sedf %s %s" % (domain.getName(),
+ sedf_opts))
+ if status != 0:
+ FAIL("[%i] xm sedf returned invalid %i != 0" % (i, status))
+
+
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sedf/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sedf/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/sedf/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/sedf
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_sedf_multi_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/sedf/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/sedf/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sedf/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sedf/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+
+SUBDIRS =
+
+TESTS = 01_sedf_multi_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sedf/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sedf/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/sedf
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_sedf_multi_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/sedf/Makefile';
\
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/sedf/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/shutdown/01_shutdown_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/01_shutdown_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,62 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Test for xm shutdown
+# 1) Create domain, verify it's up with console
+# 2) shut down the domain, verify it's down
+
+import time
+import commands
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Make sure a command succeeds
+ run = console.runCmd("ls /bin")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+status, output = traceCommand("xm shutdown %s" % domain.getName())
+if status != 0:
+ FAIL("good xm shutdown exited with bad %i != 0" % status)
+
+# Verify the domain is gone
+time.sleep(10)
+
+if isDomainRunning(domain.getName()):
+
+ traceCommand("xm list")
+ if isDomainRunning(domain.getName()):
+ FAIL("Guest domain failed to shutdown")
+ else:
+ FAIL("I had to run an xm list to update xend state!")
+
+
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/shutdown/02_shutdown_badparm_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/02_shutdown_badparm_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,39 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Test for xm shutdown
+# 1) Create domain
+# 2) call xm shutdown with a bad parameter, expect failure
+
+import commands
+
+from XmTestLib import *
+
+eyecatcher = "Error:"
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+
+ret, output = traceCommand("xm shutdown -x %s" % domain.getName())
+where = output.find(eyecatcher)
+if (ret == 0):
+ FAIL("xm shutdown returned invalid %i == 0" % ret)
+elif where != 0:
+ FAIL("xm shutdown failed to report error for bad arg")
+
+# Stop the domain (nice shutdown)
+domain.stop()
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/shutdown/03_shutdown_nonexist_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/03_shutdown_nonexist_neg.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,22 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Test for xm shutdown
+# 1) call xm shutdown with a nonexistant domain, expect failure
+
+import commands
+
+from XmTestLib import *
+
+eyecatcher = "Error:"
+
+ret, output = traceCommand("xm shutdown 9999")
+where = output.find(eyecatcher)
+if (ret == 0):
+ FAIL("xm shutdown returned invalid %i == 0" % ret)
+elif where != 0:
+ FAIL("xm shutdown failed to report error for bad domid")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/shutdown/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/shutdown/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/shutdown
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_shutdown_basic_pos.test 02_shutdown_badparm_neg.test
03_shutdown_nonexist_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/shutdown/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/shutdown/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/shutdown/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+SUBDIRS =
+
+TESTS = 01_shutdown_basic_pos.test 02_shutdown_badparm_neg.test
03_shutdown_nonexist_neg.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/shutdown/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/shutdown/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/shutdown
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_shutdown_basic_pos.test 02_shutdown_badparm_neg.test
03_shutdown_nonexist_neg.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/shutdown/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/shutdown/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/sysrq/01_sysrq_basic_neg.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/01_sysrq_basic_neg.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,17 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+# Check to make sure an invalid sysrq is handled appropriately
+
+import re
+
+from XmTestLib import *
+
+status, output = traceCommand("xm sysrq does_not_exist s");
+
+if status == 0:
+ if verbose:
+ print "Bad SysRq output: " + output;
+ FAIL("Bad SysRq didn't report error: %i == 0" % status);
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/sysrq/02_sysrq_sync_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/02_sysrq_sync_pos.py Mon Nov 7 11:53:38 2005
@@ -0,0 +1,58 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+
+status, output = traceCommand("xm sysrq %s s" % domain.getName())
+
+if status != 0:
+ FAIL("Good sysrq failed with: %i != 0", status)
+
+# -- CHECK OUTPUT
+
+# Run 'ls'
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Check the dmesg output on the domU
+ run = console.runCmd("dmesg | grep Emerg\n")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
+# Save a transcript for human review
+# saveLog(console.getHistory())
+
+# Check dmesg for the sysrq notice
+if not re.search("Emergency", run["output"]):
+ FAIL("Sync SysRq not delivered")
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/sysrq/03_sysrq_withreboot_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/03_sysrq_withreboot_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,43 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+from XmTestLib import *
+
+import time
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create domain:"
+ print e.extra
+ FAIL(str(e))
+
+status, output = traceCommand("xm reboot %s" % domain.getName())
+if status != 0:
+ FAIL("reboot %s failed with %i != 0" % (domain.getName(), status))
+
+# Wait for the reboot to finish
+time.sleep(20)
+
+try:
+ console = XmConsole(domain.getName())
+ console.sendInput("input")
+except ConsoleError, e:
+ FAIL(str(e))
+
+status, output = traceCommand("xm sysrq %s s" % domain.getName())
+if status != 0:
+ FAIL("sysrq failed with %i != 0" % status)
+
+try:
+ run = console.runCmd("dmesg | grep -i reboot")
+except ConsoleError, e:
+ FAIL(str(e))
+
+if run == 0:
+ FAIL("reboot/sysrq resulted in reboot!")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sysrq/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/sysrq/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/sysrq
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_sysrq_basic_neg.test \
+ 02_sysrq_sync_pos.test \
+ 03_sysrq_withreboot_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/sysrq/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/sysrq/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sysrq/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,23 @@
+SUBDIRS =
+
+TESTS = 01_sysrq_basic_neg.test \
+ 02_sysrq_sync_pos.test \
+ 03_sysrq_withreboot_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/sysrq/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/sysrq/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,524 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/sysrq
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_sysrq_basic_neg.test \
+ 02_sysrq_sync_pos.test \
+ 03_sysrq_withreboot_pos.test
+
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/sysrq/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/sysrq/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/unpause/01_unpause_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/unpause/01_unpause_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,87 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Paul Larson <pl@xxxxxxxxxx>
+
+# Description:
+# Positive Tests:
+# Tests for xm unpause
+# 1) Create domain, verify it's up with console
+# 2) randomly pause and unpause the domain
+# 3) unpause it one last time
+# 4) verify it's still alive with console
+
+import time
+import commands
+from random import *
+
+from XmTestLib import *
+
+# Create a domain (default XmTestDomain, with our ramdisk)
+domain = XmTestDomain()
+
+# Start it
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Attach a console to it
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+
+try:
+ # Activate the console
+ console.sendInput("foo")
+ # Make sure a command succeeds
+ run = console.runCmd("ls")
+except ConsoleError, e:
+ FAIL(str(e))
+
+# Close the console
+console.closeConsole()
+
+seed(time.time())
+
+for i in range(100):
+ pauseit = randint(0,1)
+ if(pauseit):
+ # Pause the domain
+ status, output = traceCommand("xm pause %s" % domain.getName())
+ if status != 0:
+ FAIL("xm pause returned invalid %i != 0", status)
+ else:
+ # Unpause the domain
+ status, output = traceCommand("xm unpause %s" % domain.getName())
+ if status != 0:
+ FAIL("xm unpause returned invalud %i != 0", status)
+
+
+# Make sure the domain is unpaused before we finish up
+status, output = traceCommand("xm unpause %s" % domain.getName())
+if status != 0:
+ FAIL("xm unpause returned invalid %i != 0", status)
+
+# Are we still alive after all that?
+try:
+ console = XmConsole(domain.getName(), historySaveCmds=True)
+except ConsoleError, e:
+ FAIL(str(e))
+try:
+ run = console.runCmd("ls")
+ #If we get here, console attached to paused domain (unexpected)
+ FAIL("console attached to supposedly paused domain")
+except ConsoleError, e:
+ pass
+
+# Close the console
+console.closeConsole()
+
+# Stop the domain (nice shutdown)
+domain.stop()
+
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/unpause/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/unpause/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/unpause/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/unpause
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_unpause_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/unpause/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/unpause/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/unpause/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/unpause/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,20 @@
+SUBDIRS =
+
+TESTS = 01_unpause_basic_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/unpause/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/unpause/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/unpause
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_unpause_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/unpause/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/unpause/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/vcpu-disable/01_vcpu-disable_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-disable/01_vcpu-disable_basic_pos.py Mon Nov
7 11:53:38 2005
@@ -0,0 +1,82 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Authors: Dan Smith <danms@xxxxxxxxxx>
+# Ryan Harper <ryanh@xxxxxxxxxx>
+
+# 1) Make sure we have a multi cpu system
+# 2) Create a test domain with 2 VCPUs
+# 3) Verify that both VCPUs are alive
+# 4) Disable DOM VCPU1 by setting the VCPU count to 1
+# 5) Assert that the VCPU has been disabled
+# 6) Enable DOM VCPU1 (restore VCPU count to 2)
+# 7) Assert that the VCPUs are both alive again
+
+import sys
+import re
+import time
+
+from XmTestLib import *
+
+check_status = 1
+max_tries = 10
+
+def safecmd(cmd):
+ i=0
+ while i < max_tries:
+ status, output = traceCommand(cmd)
+ if status == 0:
+ break
+ i = i+1
+ # print "output: [%s]"%(output)
+ time.sleep(1)
+ return status, output
+
+# Verify that we can run this test on this host
+if smpConcurrencyLevel() <= 1:
+ print "*** NOTE: This machine does not have more than one physical"
+ print " or logical cpu. The vcpu-disable test cannot be run!"
+ SKIP("Host not capable of running test")
+
+# Start a XmTestDomain with 2 VCPUs
+domain = XmTestDomain(extraOpts = {"vcpus":"2"})
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+# Disable VCPU 1
+cmd = "xm set-vcpus %s 1" % domain.getName()
+status, output = safecmd(cmd)
+if check_status and status != 0:
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+# Wait for the change to become active
+for i in [1,2,3,4,5,6,7,8,9,10]:
+ domUvcpu1 = getVcpuInfo(domain.getName())[1]
+ status, output = traceCommand("xm vcpu-list")
+ if domUvcpu1 is None:
+ break
+ time.sleep(1)
+
+if domUvcpu1 is not None:
+ print "domUvcpu1: [%s] output: [%s]"%(domUvcpu1, output)
+ FAIL("failed to disable VCPU1")
+
+# Enable VCPU 1
+cmd = "xm set-vcpus %s 2" % domain.getName()
+status, output = safecmd(cmd)
+if check_status and status != 0:
+ FAIL("\"%s\" returned invalid %i != 0" %(cmd,status))
+
+for i in [1,2,3,4,5,6,7,8,9,10]:
+ domUvcpu1 = getVcpuInfo(domain.getName())[1]
+ if domUvcpu1 is not None:
+ break
+ time.sleep(1)
+
+domain.destroy()
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/vcpu-disable/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-disable/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/vcpu-disable/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/vcpu-disable
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_vcpu-disable_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/vcpu-disable/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/vcpu-disable/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/vcpu-disable/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-disable/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+
+SUBDIRS =
+
+TESTS = 01_vcpu-disable_basic_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/vcpu-disable/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-disable/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/vcpu-disable
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_vcpu-disable_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/vcpu-disable/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/vcpu-disable/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424
tools/xm-test/tests/vcpu-pin/01_vcpu-pin_basic_pos.py
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-pin/01_vcpu-pin_basic_pos.py Mon Nov 7
11:53:38 2005
@@ -0,0 +1,48 @@
+#!/usr/bin/python
+
+# Copyright (C) International Business Machines Corp., 2005
+# Author: Dan Smith <danms@xxxxxxxxxx>
+
+# 1) Make sure we have a multi cpu system
+# 2) Create a test domain and pin its VCPU0 to CPU 0 and then 1
+
+import sys;
+import re;
+
+from XmTestLib import *
+
+# Verify that we can run this test on this host
+if smpConcurrencyLevel() <= 1:
+ print "*** NOTE: This machine does not have more than one physical"
+ print " or logical cpu. The vcpu-pin test cannot be run!"
+ SKIP("Host not capable of running test")
+
+domain = XmTestDomain()
+
+try:
+ domain.start()
+except DomainError, e:
+ if verbose:
+ print "Failed to create test domain because:"
+ print e.extra
+ FAIL(str(e))
+
+status, output = traceCommand("xm vcpu-pin %s 0 0" % domain.getName())
+
+if status != 0:
+ FAIL("xm vcpu-pin returned invalid %i != 0" % status)
+
+cpu = getVcpuInfo(domain.getName())[0]
+
+if cpu != 0:
+ FAIL("failed to switch VCPU 0 to CPU 0")
+
+status, output = traceCommand("xm vcpu-pin %s 0 1" % domain.getName())
+
+if status != 0:
+ FAIL("xm vcpu-pin returned invalid %i != 0" % status)
+
+cpu = getVcpuInfo(domain.getName())[0]
+
+if cpu != 1:
+ FAIL("failed to switch VCPU 0 to CPU 1")
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/vcpu-pin/Makefile
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-pin/Makefile Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# tests/vcpu-pin/Makefile. Generated from Makefile.in by configure.
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+srcdir = .
+top_srcdir = ../..
+
+pkgdatadir = $(datadir)/xm-test
+pkglibdir = $(libdir)/xm-test
+pkgincludedir = $(includedir)/xm-test
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = /usr/bin/install -c
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/vcpu-pin
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = ${SHELL} /home/dan/build/sf-xm-test/missing --run aclocal-1.9
+AMDEP_FALSE = #
+AMDEP_TRUE =
+AMTAR = ${SHELL} /home/dan/build/sf-xm-test/missing --run tar
+AUTOCONF = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoconf
+AUTOHEADER = ${SHELL} /home/dan/build/sf-xm-test/missing --run autoheader
+AUTOMAKE = ${SHELL} /home/dan/build/sf-xm-test/missing --run automake-1.9
+AWK = gawk
+CC = gcc
+CCDEPMODE = depmode=none
+CFLAGS = -g -O2
+CPPFLAGS =
+CYGPATH_W = echo
+DEFS = -DPACKAGE_NAME=\"xm-test\" -DPACKAGE_TARNAME=\"xm-test\"
-DPACKAGE_VERSION=\"0.4.0\" -DPACKAGE_STRING=\"xm-test\ 0.4.0\"
-DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"xm-test\" -DVERSION=\"0.4.0\"
-DYYTEXT_POINTER=1
+DEPDIR = .deps
+ECHO_C =
+ECHO_N = -n
+ECHO_T =
+ENABLE_VMX = False
+EXEEXT =
+INSTALL_DATA = ${INSTALL} -m 644
+INSTALL_PROGRAM = ${INSTALL}
+INSTALL_SCRIPT = ${INSTALL}
+INSTALL_STRIP_PROGRAM = ${SHELL} $(install_sh) -c -s
+LDFLAGS =
+LEX = flex
+LEXLIB = -lfl
+LEX_OUTPUT_ROOT = lex.yy
+LIBOBJS =
+LIBS =
+LTLIBOBJS =
+MAKEINFO = ${SHELL} /home/dan/build/sf-xm-test/missing --run makeinfo
+OBJEXT = o
+PACKAGE = xm-test
+PACKAGE_BUGREPORT =
+PACKAGE_NAME = xm-test
+PACKAGE_STRING = xm-test 0.4.0
+PACKAGE_TARNAME = xm-test
+PACKAGE_VERSION = 0.4.0
+PATH_SEPARATOR = :
+SET_MAKE =
+SHELL = /bin/sh
+STRIP =
+TENV = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+VERSION = 0.4.0
+YACC = bison -y
+ac_ct_CC = gcc
+ac_ct_STRIP =
+am__fastdepCC_FALSE =
+am__fastdepCC_TRUE = #
+am__include = include
+am__leading_dot = .
+am__quote =
+am__tar = ${AMTAR} chof - "$$tardir"
+am__untar = ${AMTAR} xf -
+bindir = ${exec_prefix}/bin
+build_alias =
+datadir = ${prefix}/share
+exec_prefix = ${prefix}
+host_alias =
+includedir = ${prefix}/include
+infodir = ${prefix}/info
+install_sh = /home/dan/build/sf-xm-test/install-sh
+libdir = ${exec_prefix}/lib
+libexecdir = ${exec_prefix}/libexec
+localstatedir = ${prefix}/var
+mandir = ${prefix}/man
+mkdir_p = mkdir -p --
+oldincludedir = /usr/include
+prefix = /usr/local
+program_transform_name = s,x,x,
+sbindir = ${exec_prefix}/sbin
+sharedstatedir = ${prefix}/com
+sysconfdir = ${prefix}/etc
+target_alias =
+SUBDIRS =
+TESTS = 01_vcpu-pin_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = PYTHONPATH=:../../lib:/usr/lib/python RD_PATH=../../ramdisk
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/vcpu-pin/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/vcpu-pin/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/vcpu-pin/Makefile.am
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-pin/Makefile.am Mon Nov 7 11:53:38 2005
@@ -0,0 +1,21 @@
+
+SUBDIRS =
+
+TESTS = 01_vcpu-pin_basic_pos.test
+
+XFAIL_TESTS =
+
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+
+TESTS_ENVIRONMENT=@TENV@
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
diff -r 19e5385bc5b3 -r a4bd444c5424 tools/xm-test/tests/vcpu-pin/Makefile.in
--- /dev/null Mon Nov 7 11:52:49 2005
+++ b/tools/xm-test/tests/vcpu-pin/Makefile.in Mon Nov 7 11:53:38 2005
@@ -0,0 +1,521 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = tests/vcpu-pin
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ENABLE_VMX = @ENABLE_VMX@
+EXEEXT = @EXEEXT@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TENV = @TENV@
+VERSION = @VERSION@
+YACC = @YACC@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS =
+TESTS = 01_vcpu-pin_basic_pos.test
+XFAIL_TESTS =
+EXTRA_DIST = $(TESTS) $(XFAIL_TESTS)
+TESTS_ENVIRONMENT = @TENV@
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign
tests/vcpu-pin/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign tests/vcpu-pin/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
$(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure
$(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @failcom='exit 1'; \
+ for f in x $$MAKEFLAGS; do \
+ case $$f in \
+ *=* | --[!k]*);; \
+ *k*) failcom='fail=yes';; \
+ esac; \
+ done; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || eval $$failcom; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
\
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS)
ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+check-TESTS: $(TESTS)
+ @failed=0; all=0; xfail=0; xpass=0; skip=0; \
+ srcdir=$(srcdir); export srcdir; \
+ list='$(TESTS)'; \
+ if test -n "$$list"; then \
+ for tst in $$list; do \
+ if test -f ./$$tst; then dir=./; \
+ elif test -f $$tst; then dir=; \
+ else dir="$(srcdir)/"; fi; \
+ if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xpass=`expr $$xpass + 1`; \
+ failed=`expr $$failed + 1`; \
+ echo "XPASS: $$tst"; \
+ ;; \
+ *) \
+ echo "PASS: $$tst"; \
+ ;; \
+ esac; \
+ elif test $$? -ne 77; then \
+ all=`expr $$all + 1`; \
+ case " $(XFAIL_TESTS) " in \
+ *" $$tst "*) \
+ xfail=`expr $$xfail + 1`; \
+ echo "XFAIL: $$tst"; \
+ ;; \
+ *) \
+ failed=`expr $$failed + 1`; \
+ echo "FAIL: $$tst"; \
+ ;; \
+ esac; \
+ else \
+ skip=`expr $$skip + 1`; \
+ echo "SKIP: $$tst"; \
+ fi; \
+ done; \
+ if test "$$failed" -eq 0; then \
+ if test "$$xfail" -eq 0; then \
+ banner="All $$all tests passed"; \
+ else \
+ banner="All $$all tests behaved as expected ($$xfail expected
failures)"; \
+ fi; \
+ else \
+ if test "$$xpass" -eq 0; then \
+ banner="$$failed of $$all tests failed"; \
+ else \
+ banner="$$failed of $$all tests did not behave as expected
($$xpass unexpected passes)"; \
+ fi; \
+ fi; \
+ dashes="$$banner"; \
+ skipped=""; \
+ if test "$$skip" -ne 0; then \
+ skipped="($$skip tests were not run)"; \
+ test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$skipped"; \
+ fi; \
+ report=""; \
+ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
+ report="Please report to $(PACKAGE_BUGREPORT)"; \
+ test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
+ dashes="$$report"; \
+ fi; \
+ dashes=`echo "$$dashes" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ test -z "$$skipped" || echo "$$skipped"; \
+ test -z "$$report" || echo "$$report"; \
+ echo "$$dashes"; \
+ test "$$failed" -eq 0; \
+ else :; fi
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed
"s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-TESTS \
+ check-am clean clean-generic clean-local clean-recursive ctags \
+ ctags-recursive distclean distclean-generic \
+ distclean-recursive distclean-tags distdir dvi dvi-am html \
+ html-am info info-am install install-am install-data \
+ install-data-am install-exec install-exec-am install-info \
+ install-info-am install-man install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic maintainer-clean-recursive \
+ mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
+ uninstall-info-am
+
+
+%.test: %.py
+ cp $< $@
+ chmod +x $@
+
+clean-local: am_config_clean-local
+
+am_config_clean-local:
+ rm -f *test
+ rm -f *log
+ rm -f *~
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |