|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] Update to Linux 2.6.14.
# HG changeset patch
# User cl349@xxxxxxxxxxxxxxxxxxxx
# Node ID 4b06313b9790b9814b0e88ea2ad2c0804d1a6bd1
# Parent 9a05a503897c2ef16917d2d896a4324555a1f4db
Update to Linux 2.6.14.
Signed-off-by: Christian Limpach <Christian.Limpach@xxxxxxxxxxxx>
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xen0_x86_32
--- a/buildconfigs/linux-defconfig_xen0_x86_32 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xen0_x86_32 Tue Jan 31 19:55:22 2006
@@ -1,13 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xen0
-# Wed Jan 25 17:29:15 2006
+# Linux kernel version: 2.6.14-xen0
+# Tue Jan 31 18:56:38 2006
#
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -22,6 +24,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +34,7 @@
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -107,6 +111,9 @@
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
@@ -121,28 +128,43 @@
#
# Firmware Drivers
#
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_MTRR=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PHYSICAL_START=0x100000
#
# Power management options (ACPI, APM)
#
+CONFIG_PM=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
@@ -152,10 +174,8 @@
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
@@ -177,7 +197,6 @@
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_SCx200 is not set
@@ -197,6 +216,147 @@
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_LIMIT is not set
+CONFIG_IP_NF_MATCH_IPRANGE=m
+# CONFIG_IP_NF_MATCH_MAC is not set
+# CONFIG_IP_NF_MATCH_PKTTYPE is not set
+# CONFIG_IP_NF_MATCH_MARK is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_LENGTH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_TCPMSS is not set
+# CONFIG_IP_NF_MATCH_HELPER is not set
+# CONFIG_IP_NF_MATCH_STATE is not set
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_FTP=m
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
#
# Device Drivers
@@ -209,6 +369,11 @@
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -244,7 +409,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -304,6 +468,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -322,6 +487,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -333,6 +499,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -347,6 +514,7 @@
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -373,10 +541,12 @@
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=y
# CONFIG_SCSI_SATA_QSTOR is not set
@@ -386,6 +556,7 @@
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA_PIO is not set
@@ -395,8 +566,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -406,6 +575,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -435,9 +605,10 @@
#
# Fusion MPT device support
#
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -450,135 +621,8 @@
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-CONFIG_IP_NF_MATCH_IPRANGE=m
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+# Network device support
+#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -591,12 +635,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
@@ -613,6 +663,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
@@ -651,6 +702,8 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -659,6 +712,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -683,6 +737,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -796,7 +852,6 @@
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
-# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
@@ -804,6 +859,8 @@
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
@@ -825,9 +882,19 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
# CONFIG_IBM_ASM is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
#
# Multimedia devices
@@ -870,12 +937,14 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -903,12 +972,17 @@
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -958,9 +1032,10 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB ATM/DSL drivers
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
#
#
@@ -977,12 +1052,17 @@
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -995,17 +1075,16 @@
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -1032,12 +1111,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1061,16 +1138,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1079,6 +1159,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1137,6 +1218,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1223,6 +1305,7 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xen0_x86_64
--- a/buildconfigs/linux-defconfig_xen0_x86_64 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xen0_x86_64 Tue Jan 31 19:55:22 2006
@@ -1,11 +1,12 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xen0
-# Wed Jan 25 17:27:39 2006
+# Linux kernel version: 2.6.14-xen0
+# Tue Jan 31 16:21:00 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,6 +14,7 @@
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -27,6 +29,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -36,6 +39,7 @@
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -81,10 +85,27 @@
CONFIG_X86_XEN_GENAPIC=y
CONFIG_X86_LOCAL_APIC=y
# CONFIG_SMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_SWIOTLB=y
CONFIG_DUMMY_IOMMU=y
+CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
@@ -92,17 +113,17 @@
#
# Power management options
#
+CONFIG_PM=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
+# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
@@ -111,10 +132,8 @@
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
@@ -138,6 +157,147 @@
CONFIG_UID16=y
#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+CONFIG_IP_NF_CT_ACCT=y
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+# CONFIG_IP_NF_IRC is not set
+# CONFIG_IP_NF_NETBIOS_NS is not set
+# CONFIG_IP_NF_TFTP is not set
+# CONFIG_IP_NF_AMANDA is not set
+# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_LIMIT is not set
+CONFIG_IP_NF_MATCH_IPRANGE=m
+# CONFIG_IP_NF_MATCH_MAC is not set
+# CONFIG_IP_NF_MATCH_PKTTYPE is not set
+# CONFIG_IP_NF_MATCH_MARK is not set
+# CONFIG_IP_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP_NF_MATCH_TOS is not set
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_DSCP is not set
+# CONFIG_IP_NF_MATCH_AH_ESP is not set
+# CONFIG_IP_NF_MATCH_LENGTH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_TCPMSS is not set
+# CONFIG_IP_NF_MATCH_HELPER is not set
+# CONFIG_IP_NF_MATCH_STATE is not set
+# CONFIG_IP_NF_MATCH_CONNTRACK is not set
+# CONFIG_IP_NF_MATCH_OWNER is not set
+CONFIG_IP_NF_MATCH_PHYSDEV=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+# CONFIG_IP_NF_TARGET_TCPMSS is not set
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
+# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
+CONFIG_IP_NF_NAT_FTP=m
+# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
# Device Drivers
#
@@ -148,6 +308,11 @@
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
@@ -183,7 +348,6 @@
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_LBD is not set
# CONFIG_CDROM_PKTCDVD is not set
@@ -243,6 +407,7 @@
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
+# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -261,6 +426,7 @@
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -272,6 +438,7 @@
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -286,6 +453,7 @@
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -313,10 +481,12 @@
# CONFIG_SCSI_ADVANSYS is not set
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=y
# CONFIG_SCSI_SATA_QSTOR is not set
@@ -326,6 +496,7 @@
# CONFIG_SCSI_SATA_ULI is not set
# CONFIG_SCSI_SATA_VIA is not set
# CONFIG_SCSI_SATA_VITESSE is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
# CONFIG_SCSI_CPQFCTS is not set
@@ -339,8 +510,6 @@
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
@@ -350,6 +519,7 @@
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -379,9 +549,10 @@
#
# Fusion MPT device support
#
-CONFIG_FUSION=y
-CONFIG_FUSION_MAX_SGE=40
-# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -394,135 +565,8 @@
# CONFIG_I2O is not set
#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-CONFIG_IP_NF_MATCH_IPRANGE=m
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-# CONFIG_IP_NF_MATCH_HELPER is not set
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-CONFIG_IP_NF_MATCH_PHYSDEV=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
+# Network device support
+#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -535,12 +579,18 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=y
# CONFIG_TYPHOON is not set
@@ -557,6 +607,7 @@
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
@@ -594,6 +645,8 @@
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
@@ -602,6 +655,7 @@
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -626,6 +680,8 @@
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -729,11 +785,12 @@
# CONFIG_AGP_INTEL is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
-# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+# CONFIG_DRM_VIA is not set
+# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
@@ -755,9 +812,19 @@
# CONFIG_W1 is not set
#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
+#
# Misc devices
#
# CONFIG_IBM_ASM is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
#
# Multimedia devices
@@ -800,12 +867,14 @@
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -833,12 +902,17 @@
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
@@ -888,9 +962,10 @@
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB ATM/DSL drivers
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
#
#
@@ -907,6 +982,8 @@
# InfiniBand support
#
CONFIG_INFINIBAND=y
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
@@ -914,14 +991,21 @@
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
#
+# SN Devices
+#
+
+#
# Firmware Drivers
#
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -934,17 +1018,16 @@
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -971,12 +1054,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -1000,16 +1081,19 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1018,6 +1102,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1081,12 +1166,14 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
# CONFIG_CHECKING is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_KPROBES is not set
@@ -1114,7 +1201,7 @@
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
@@ -1157,6 +1244,7 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xenU_x86_32
--- a/buildconfigs/linux-defconfig_xenU_x86_32 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xenU_x86_32 Tue Jan 31 19:55:22 2006
@@ -1,13 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xenU
-# Wed Jan 25 17:29:40 2006
+# Linux kernel version: 2.6.14-xenU
+# Tue Jan 31 18:57:16 2006
#
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -21,6 +23,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -31,6 +34,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -110,6 +114,10 @@
CONFIG_SMP=y
CONFIG_SMP_ALTERNATIVES=y
CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -119,13 +127,27 @@
#
# Firmware Drivers
#
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_X86_PAE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PHYSICAL_START=0x100000
#
# Executable file formats
@@ -135,84 +157,7 @@
# CONFIG_BINFMT_MISC is not set
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -226,6 +171,7 @@
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
# CONFIG_IP_PNP_DHCP is not set
# CONFIG_IP_PNP_BOOTP is not set
@@ -238,10 +184,16 @@
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -259,10 +211,6 @@
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -270,11 +218,93 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_LBD is not set
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -282,6 +312,10 @@
# CONFIG_TUN is not set
#
+# PHY device support
+#
+
+#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
@@ -311,12 +345,19 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -329,17 +370,16 @@
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -366,11 +406,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -394,12 +433,14 @@
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -408,6 +449,7 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -466,6 +508,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -544,11 +587,13 @@
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xenU_x86_64
--- a/buildconfigs/linux-defconfig_xenU_x86_64 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xenU_x86_64 Tue Jan 31 19:55:22 2006
@@ -1,11 +1,12 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xenU
-# Wed Jan 25 17:28:26 2006
+# Linux kernel version: 2.6.14-xenU
+# Tue Jan 31 16:23:06 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,6 +14,7 @@
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -26,6 +28,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -38,6 +41,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -82,14 +86,33 @@
CONFIG_X86_CPUID=y
CONFIG_X86_XEN_GENAPIC=y
CONFIG_SMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
+CONFIG_HOTPLUG_CPU=y
CONFIG_DUMMY_IOMMU=y
+CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Bus options (PCI etc.)
@@ -109,100 +132,7 @@
CONFIG_UID16=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -212,10 +142,15 @@
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
@@ -237,8 +172,9 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -283,6 +219,7 @@
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
@@ -290,11 +227,14 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -319,13 +259,17 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
+# CONFIG_IP_NF_MATCH_CONNBYTES is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -343,6 +287,7 @@
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
@@ -370,8 +315,11 @@
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
#
@@ -397,8 +345,11 @@
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -433,10 +384,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -476,10 +423,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
@@ -555,6 +498,106 @@
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP_TXCRC=y
CONFIG_BT_HCIVHCI=m
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_LBD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+CONFIG_SCSI_SATA=m
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -562,6 +605,11 @@
CONFIG_TUN=m
#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
@@ -589,6 +637,7 @@
#
# CONFIG_STRIP is not set
CONFIG_ATMEL=m
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -611,11 +660,21 @@
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
CONFIG_INPUT=m
#
+# SN Devices
+#
+
+#
# Firmware Drivers
#
+# CONFIG_DELL_RBU is not set
+# CONFIG_DCDBAS is not set
#
# File systems
@@ -624,6 +683,7 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
@@ -643,18 +703,15 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -662,6 +719,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -689,12 +747,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -720,15 +776,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -751,6 +810,7 @@
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -828,12 +888,14 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_KPROBES is not set
@@ -850,7 +912,7 @@
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
@@ -860,7 +922,7 @@
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_AES_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
@@ -897,6 +959,7 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xen_x86_32
--- a/buildconfigs/linux-defconfig_xen_x86_32 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xen_x86_32 Tue Jan 31 19:55:22 2006
@@ -1,13 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xen
-# Wed Jan 25 17:30:02 2006
+# Linux kernel version: 2.6.14-xen
+# Tue Jan 31 19:01:58 2006
#
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -23,6 +25,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
@@ -34,6 +37,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -114,6 +118,10 @@
CONFIG_SMP=y
CONFIG_SMP_ALTERNATIVES=y
CONFIG_NR_CPUS=8
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_TOSHIBA is not set
@@ -126,29 +134,44 @@
#
# Firmware Drivers
#
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGHMEM4G is not set
+CONFIG_HIGHMEM64G=y
CONFIG_HIGHMEM=y
+CONFIG_X86_PAE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_MTRR=y
-CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_CRASH_DUMP is not set
#
# Power management options (ACPI, APM)
#
+CONFIG_PM=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
@@ -157,10 +180,8 @@
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set
@@ -182,9 +203,9 @@
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
CONFIG_SCx200=m
+# CONFIG_HOTPLUG_CPU is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -192,6 +213,8 @@
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -200,7 +223,6 @@
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_TCIC=m
CONFIG_PCCARD_NONSTATIC=m
#
@@ -223,475 +245,7 @@
CONFIG_BINFMT_MISC=m
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-CONFIG_MTD_PNC2000=m
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_ELAN_104NC=m
-CONFIG_MTD_SCx200_DOCFLASH=m
-# CONFIG_MTD_AMD76XROM is not set
-# CONFIG_MTD_ICHXROM is not set
-# CONFIG_MTD_SCB2_FLASH is not set
-CONFIG_MTD_NETtel=m
-CONFIG_MTD_DILNETPC=m
-CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
-# CONFIG_MTD_L440GX is not set
-CONFIG_MTD_PCI=m
-CONFIG_MTD_PCMCIA=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-# CONFIG_MTD_PMC551_BUGFIX is not set
-# CONFIG_MTD_PMC551_DEBUG is not set
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLKMTD=m
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_DOC2000=m
-CONFIG_MTD_DOC2001=m
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-CONFIG_MTD_NAND_DISKONCHIP=m
-# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
-CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
-# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_PC_PCMCIA=m
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-CONFIG_PNP=y
-# CONFIG_PNP_DEBUG is not set
-
-#
-# Protocols
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_BPCK6=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-# CONFIG_PARIDE_EPATC8 is not set
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECS=m
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_CMD640=y
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPNP=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_OPTI621=m
-CONFIG_BLK_DEV_RZ1000=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_BLK_DEV_ATIIXP=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_TRIFLEX=y
-CONFIG_BLK_DEV_CY82C693=y
-CONFIG_BLK_DEV_CS5520=y
-CONFIG_BLK_DEV_CS5530=y
-CONFIG_BLK_DEV_HPT34X=y
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=y
-CONFIG_BLK_DEV_SC1200=m
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_NS87415=m
-CONFIG_BLK_DEV_PDC202XX_OLD=y
-CONFIG_PDC202XX_BURST=y
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-CONFIG_PDC202XX_FORCE=y
-CONFIG_BLK_DEV_SVWKS=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_BLK_DEV_SIS5513=y
-CONFIG_BLK_DEV_SLC90E66=y
-CONFIG_BLK_DEV_TRM290=m
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=m
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=m
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-CONFIG_AIC7XXX_DEBUG_ENABLE=y
-CONFIG_AIC7XXX_DEBUG_MASK=0
-CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=32
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-CONFIG_AIC79XX_ENABLE_RD_STRM=y
-CONFIG_AIC79XX_DEBUG_ENABLE=y
-CONFIG_AIC79XX_DEBUG_MASK=0
-CONFIG_AIC79XX_REG_PRETTY_PRINT=y
-CONFIG_SCSI_DPT_I2O=m
-CONFIG_SCSI_ADVANSYS=m
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_SCSI_SATA=y
-CONFIG_SCSI_SATA_AHCI=m
-CONFIG_SCSI_SATA_SVW=m
-CONFIG_SCSI_ATA_PIIX=m
-CONFIG_SCSI_SATA_NV=m
-CONFIG_SCSI_SATA_PROMISE=m
-# CONFIG_SCSI_SATA_QSTOR is not set
-CONFIG_SCSI_SATA_SX4=m
-CONFIG_SCSI_SATA_SIL=m
-CONFIG_SCSI_SATA_SIS=m
-CONFIG_SCSI_SATA_ULI=m
-CONFIG_SCSI_SATA_VIA=m
-CONFIG_SCSI_SATA_VITESSE=m
-# CONFIG_SCSI_CPQFCTS is not set
-CONFIG_SCSI_DMX3191D=m
-CONFIG_SCSI_EATA_PIO=m
-CONFIG_SCSI_FUTURE_DOMAIN=m
-CONFIG_SCSI_IPS=m
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-CONFIG_SCSI_IPR=m
-# CONFIG_SCSI_IPR_TRACE is not set
-# CONFIG_SCSI_IPR_DUMP is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-CONFIG_SCSI_QLOGIC_ISP=m
-CONFIG_SCSI_QLOGIC_FC=m
-CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLOGIC_1280_1040=y
-CONFIG_SCSI_QLA2XXX=m
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-CONFIG_SCSI_NSP32=m
-CONFIG_SCSI_DEBUG=m
-
-#
-# PCMCIA SCSI adapter support
-#
-CONFIG_PCMCIA_AHA152X=m
-CONFIG_PCMCIA_FDOMAIN=m
-CONFIG_PCMCIA_NINJA_SCSI=m
-CONFIG_PCMCIA_QLOGIC=m
-CONFIG_PCMCIA_SYM53C500=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_OUI_DB is not set
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-
-#
-# Device Drivers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-CONFIG_I2O=m
-CONFIG_I2O_CONFIG=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -701,10 +255,15 @@
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=m
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
@@ -723,8 +282,20 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
@@ -769,6 +340,9 @@
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -776,11 +350,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -805,14 +383,18 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -824,12 +406,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -859,8 +443,11 @@
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
@@ -891,8 +478,24 @@
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_IP_DCCP_UNLOAD_HACK is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -930,10 +533,6 @@
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -971,6 +570,7 @@
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -978,10 +578,6 @@
# Network testing
#
CONFIG_NET_PKTGEN=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
CONFIG_HAMRADIO=y
#
@@ -1088,6 +684,502 @@
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+CONFIG_MTD_PNC2000=m
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+CONFIG_MTD_SCx200_DOCFLASH=m
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+# CONFIG_MTD_SCB2_FLASH is not set
+CONFIG_MTD_NETtel=m
+CONFIG_MTD_DILNETPC=m
+CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
+# CONFIG_MTD_L440GX is not set
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PCMCIA=m
+# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+CONFIG_MTD_SLRAM=m
+CONFIG_MTD_PHRAM=m
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+CONFIG_MTD_BLKMTD=m
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOC2000=m
+CONFIG_MTD_DOC2001=m
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=m
+CONFIG_MTD_NAND_DISKONCHIP=m
+# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
+CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
+# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+CONFIG_PARPORT_PC_FIFO=y
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_PC_PCMCIA=m
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_BPCK6=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+# CONFIG_PARIDE_EPATC8 is not set
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_LBD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECS=m
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDETAPE=m
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+CONFIG_BLK_DEV_CMD640_ENHANCED=y
+CONFIG_BLK_DEV_IDEPNP=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_OPTI621=m
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=y
+CONFIG_BLK_DEV_ALI15X3=y
+# CONFIG_WDC_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_BLK_DEV_ATIIXP=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_TRIFLEX=y
+CONFIG_BLK_DEV_CY82C693=y
+CONFIG_BLK_DEV_CS5520=y
+CONFIG_BLK_DEV_CS5530=y
+CONFIG_BLK_DEV_HPT34X=y
+# CONFIG_HPT34X_AUTODMA is not set
+CONFIG_BLK_DEV_HPT366=y
+CONFIG_BLK_DEV_SC1200=m
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT821X=m
+CONFIG_BLK_DEV_NS87415=m
+CONFIG_BLK_DEV_PDC202XX_OLD=y
+CONFIG_PDC202XX_BURST=y
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+CONFIG_PDC202XX_FORCE=y
+CONFIG_BLK_DEV_SVWKS=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_BLK_DEV_SIS5513=y
+CONFIG_BLK_DEV_SLC90E66=y
+CONFIG_BLK_DEV_TRM290=m
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=m
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+CONFIG_AIC79XX_ENABLE_RD_STRM=y
+CONFIG_AIC79XX_DEBUG_ENABLE=y
+CONFIG_AIC79XX_DEBUG_MASK=0
+CONFIG_AIC79XX_REG_PRETTY_PRINT=y
+CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_SATA=m
+CONFIG_SCSI_SATA_AHCI=m
+CONFIG_SCSI_SATA_SVW=m
+CONFIG_SCSI_ATA_PIIX=m
+CONFIG_SCSI_SATA_MV=m
+CONFIG_SCSI_SATA_NV=m
+CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
+CONFIG_SCSI_SATA_SX4=m
+CONFIG_SCSI_SATA_SIL=m
+CONFIG_SCSI_SATA_SIS=m
+CONFIG_SCSI_SATA_ULI=m
+CONFIG_SCSI_SATA_VIA=m
+CONFIG_SCSI_SATA_VITESSE=m
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
+# CONFIG_SCSI_CPQFCTS is not set
+CONFIG_SCSI_DMX3191D=m
+CONFIG_SCSI_EATA_PIO=m
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_IPS=m
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_IPR=m
+# CONFIG_SCSI_IPR_TRACE is not set
+# CONFIG_SCSI_IPR_DUMP is not set
+CONFIG_SCSI_QLOGIC_ISP=m
+CONFIG_SCSI_QLOGIC_FC=m
+CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLOGIC_1280_1040=y
+CONFIG_SCSI_QLA2XXX=m
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_QLA24XX=m
+CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+CONFIG_SCSI_NSP32=m
+CONFIG_SCSI_DEBUG=m
+
+#
+# PCMCIA SCSI adapter support
+#
+CONFIG_PCMCIA_AHA152X=m
+CONFIG_PCMCIA_FDOMAIN=m
+CONFIG_PCMCIA_NINJA_SCSI=m
+CONFIG_PCMCIA_QLOGIC=m
+CONFIG_PCMCIA_SYM53C500=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_IEEE1394_OUI_DB is not set
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+CONFIG_IEEE1394_PCILYNX=m
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_CMP=m
+CONFIG_IEEE1394_AMDTP=m
+
+#
+# I2O device support
+#
+CONFIG_I2O=m
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -1110,12 +1202,28 @@
CONFIG_ARCNET_COM20020_PCI=m
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
@@ -1132,6 +1240,7 @@
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
+CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
@@ -1162,6 +1271,7 @@
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -1176,6 +1286,8 @@
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
# CONFIG_R8169_VLAN is not set
+CONFIG_SIS190=m
+CONFIG_SKGE=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
@@ -1184,6 +1296,7 @@
#
# Ethernet (10000 Mbit)
#
+CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
@@ -1221,9 +1334,14 @@
#
# Wireless 802.11b ISA/PCI cards support
#
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
@@ -1232,6 +1350,7 @@
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
+CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
@@ -1240,6 +1359,11 @@
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
+CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
#
@@ -1346,6 +1470,10 @@
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -1562,9 +1690,7 @@
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
-# CONFIG_GAMEPORT_CS461X is not set
#
# Character devices
@@ -1623,14 +1749,18 @@
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
+CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
#
@@ -1671,7 +1801,6 @@
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
-# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
@@ -1679,6 +1808,8 @@
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
@@ -1741,14 +1872,45 @@
CONFIG_I2C_PCA_ISA=m
#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_RTC8564=m
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+CONFIG_W1_MATROX=m
+CONFIG_W1_DS9490=m
+CONFIG_W1_DS9490_BRIDGE=m
+CONFIG_W1_THERM=m
+CONFIG_W1_SMEM=m
+CONFIG_W1_DS2433=m
+# CONFIG_W1_DS2433_CRC is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
@@ -1767,36 +1929,17 @@
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
-# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
+# CONFIG_SENSORS_SMSC47B397 is not set
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
@@ -1804,6 +1947,10 @@
CONFIG_IBM_ASM=m
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
@@ -1816,6 +1963,7 @@
# Video Adapters
#
CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
@@ -1869,11 +2017,20 @@
#
# Supported USB Adapters
#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_DIBUSB=m
-CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES=y
-# CONFIG_DVB_DIBCOM_DEBUG is not set
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set
@@ -1884,12 +2041,16 @@
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-CONFIG_DVB_B2C2_SKYSTAR=m
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
@@ -1908,6 +2069,7 @@
CONFIG_DVB_TDA80XX=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
+CONFIG_DVB_S5H1420=m
#
# DVB-T (terrestrial) frontends
@@ -1937,6 +2099,8 @@
CONFIG_DVB_NXT2002=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
@@ -1961,6 +2125,7 @@
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
+CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
@@ -2004,6 +2169,7 @@
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
+CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
# CONFIG_FB_PM3 is not set
@@ -2048,8 +2214,10 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -2062,11 +2230,12 @@
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
@@ -2089,9 +2258,10 @@
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
-CONFIG_SND_ALS4000=m
+CONFIG_SND_AD1889=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
@@ -2130,7 +2300,6 @@
# CONFIG_SOUND_CMPCI_MIDI is not set
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_EMU10K1=m
-CONFIG_MIDI_EMU10K1=y
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
@@ -2144,50 +2313,7 @@
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
-CONFIG_MIDI_VIA82CXXX=y
-CONFIG_SOUND_OSS=m
-# CONFIG_SOUND_TRACEINIT is not set
-# CONFIG_SOUND_DMAP is not set
-# CONFIG_SOUND_AD1816 is not set
-CONFIG_SOUND_AD1889=m
-CONFIG_SOUND_SGALAXY=m
-CONFIG_SOUND_ADLIB=m
-CONFIG_SOUND_ACI_MIXER=m
-CONFIG_SOUND_CS4232=m
-CONFIG_SOUND_SSCAPE=m
-CONFIG_SOUND_GUS=m
-CONFIG_SOUND_GUS16=y
-CONFIG_SOUND_GUSMAX=y
-CONFIG_SOUND_VMIDI=m
-CONFIG_SOUND_TRIX=m
-CONFIG_SOUND_MSS=m
-CONFIG_SOUND_MPU401=m
-CONFIG_SOUND_NM256=m
-CONFIG_SOUND_MAD16=m
-CONFIG_MAD16_OLDCARD=y
-CONFIG_SOUND_PAS=m
-CONFIG_SOUND_PSS=m
-CONFIG_PSS_MIXER=y
-CONFIG_SOUND_SB=m
-# CONFIG_SOUND_AWE32_SYNTH is not set
-CONFIG_SOUND_WAVEFRONT=m
-CONFIG_SOUND_MAUI=m
-CONFIG_SOUND_YM3812=m
-CONFIG_SOUND_OPL3SA1=m
-CONFIG_SOUND_OPL3SA2=m
-CONFIG_SOUND_YMFPCI=m
-# CONFIG_SOUND_YMFPCI_LEGACY is not set
-CONFIG_SOUND_UART6850=m
-CONFIG_SOUND_AEDSP16=m
-CONFIG_SC6600=y
-CONFIG_SC6600_JOY=y
-CONFIG_SC6600_CDROM=4
-CONFIG_SC6600_CDROMBASE=0x0
-# CONFIG_AEDSP16_MSS is not set
-# CONFIG_AEDSP16_SBPRO is not set
-# CONFIG_AEDSP16_MPU401 is not set
CONFIG_SOUND_TVMIXER=m
-CONFIG_SOUND_KAHLUA=m
CONFIG_SOUND_ALI5455=m
CONFIG_SOUND_FORTE=m
CONFIG_SOUND_RME96XX=m
@@ -2207,6 +2333,7 @@
CONFIG_USB_DEVICEFS=y
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
@@ -2215,6 +2342,7 @@
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -2225,12 +2353,11 @@
#
# USB Device Class drivers
#
-CONFIG_USB_AUDIO=m
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
-CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
@@ -2247,6 +2374,7 @@
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ONETOUCH=y
#
# USB Input Devices
@@ -2263,12 +2391,17 @@
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
+CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
+CONFIG_USB_ITMTOUCH=m
CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
+CONFIG_USB_KEYSPAN_REMOTE=m
+CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
@@ -2299,32 +2432,21 @@
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+# CONFIG_USB_EPSON2888 is not set
+CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_ZD1201=m
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -2394,19 +2516,24 @@
CONFIG_USB_PHIDGETSERVO=m
# CONFIG_USB_IDMOUSE is not set
CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
@@ -2434,12 +2561,18 @@
# CONFIG_INFINIBAND is not set
#
+# SN Devices
+#
+
+#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -2457,18 +2590,15 @@
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-CONFIG_XFS_RT=y
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+CONFIG_XFS_RT=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
@@ -2476,6 +2606,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -2505,14 +2636,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -2531,8 +2658,7 @@
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -2551,15 +2677,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -2583,6 +2712,7 @@
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
+CONFIG_9P_FS=m
#
# Partition Types
@@ -2662,6 +2792,7 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -2716,6 +2847,7 @@
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
@@ -2760,14 +2892,20 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/linux-defconfig_xen_x86_64
--- a/buildconfigs/linux-defconfig_xen_x86_64 Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/linux-defconfig_xen_x86_64 Tue Jan 31 19:55:22 2006
@@ -1,11 +1,12 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12.6-xen
-# Wed Jan 25 17:29:17 2006
+# Linux kernel version: 2.6.14-xen
+# Tue Jan 31 17:30:31 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -13,6 +14,7 @@
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -28,6 +30,7 @@
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
@@ -38,6 +41,7 @@
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
@@ -84,44 +88,62 @@
CONFIG_X86_XEN_GENAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_SMP=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
-CONFIG_HAVE_DEC_LOCK=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_NR_CPUS=8
+CONFIG_HOTPLUG_CPU=y
CONFIG_SWIOTLB=y
CONFIG_DUMMY_IOMMU=y
+CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
+CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
+CONFIG_PM=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
-CONFIG_ACPI_BOOT=y
-CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
+CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
+CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
-CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
-CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
-# CONFIG_ACPI_CONTAINER is not set
+CONFIG_ACPI_CONTAINER=m
#
# Bus options (PCI etc.)
@@ -143,445 +165,7 @@
CONFIG_UID16=y
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=m
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=m
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_GEN_PROBE=m
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=3
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_CFI_UTIL=m
-CONFIG_MTD_RAM=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PNC2000 is not set
-CONFIG_MTD_SC520CDP=m
-CONFIG_MTD_NETSC520=m
-CONFIG_MTD_TS5500=m
-CONFIG_MTD_SBC_GXX=m
-CONFIG_MTD_ELAN_104NC=m
-# CONFIG_MTD_AMD76XROM is not set
-# CONFIG_MTD_ICHXROM is not set
-CONFIG_MTD_SCB2_FLASH=m
-# CONFIG_MTD_NETtel is not set
-# CONFIG_MTD_DILNETPC is not set
-# CONFIG_MTD_L440GX is not set
-CONFIG_MTD_PCI=m
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_PMC551=m
-# CONFIG_MTD_PMC551_BUGFIX is not set
-# CONFIG_MTD_PMC551_DEBUG is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTDRAM_TOTAL_SIZE=4096
-CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLKMTD is not set
-CONFIG_MTD_BLOCK2MTD=m
-
-#
-# Disk-On-Chip Device Drivers
-#
-CONFIG_MTD_DOC2000=m
-# CONFIG_MTD_DOC2001 is not set
-CONFIG_MTD_DOC2001PLUS=m
-CONFIG_MTD_DOCPROBE=m
-CONFIG_MTD_DOCECC=m
-# CONFIG_MTD_DOCPROBE_ADVANCED is not set
-CONFIG_MTD_DOCPROBE_ADDRESS=0
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_NOT_PC=y
-# CONFIG_PARPORT_GSC is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-CONFIG_PARIDE=m
-CONFIG_PARIDE_PARPORT=m
-
-#
-# Parallel IDE high-level drivers
-#
-CONFIG_PARIDE_PD=m
-CONFIG_PARIDE_PCD=m
-CONFIG_PARIDE_PF=m
-CONFIG_PARIDE_PT=m
-CONFIG_PARIDE_PG=m
-
-#
-# Parallel IDE protocol modules
-#
-CONFIG_PARIDE_ATEN=m
-CONFIG_PARIDE_BPCK=m
-CONFIG_PARIDE_COMM=m
-CONFIG_PARIDE_DSTR=m
-CONFIG_PARIDE_FIT2=m
-CONFIG_PARIDE_FIT3=m
-CONFIG_PARIDE_EPAT=m
-CONFIG_PARIDE_EPATC8=y
-CONFIG_PARIDE_EPIA=m
-CONFIG_PARIDE_FRIQ=m
-CONFIG_PARIDE_FRPW=m
-CONFIG_PARIDE_KBIC=m
-CONFIG_PARIDE_KTTI=m
-CONFIG_PARIDE_ON20=m
-CONFIG_PARIDE_ON26=m
-CONFIG_BLK_CPQ_DA=m
-CONFIG_BLK_CPQ_CISS_DA=m
-CONFIG_CISS_SCSI_TAPE=y
-CONFIG_BLK_DEV_DAC960=m
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_SX8=m
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_LBD=y
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_ATA_OVER_ETH=m
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=m
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_CMD640=y
-CONFIG_BLK_DEV_CMD640_ENHANCED=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_RZ1000=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_AEC62XX=y
-CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
-CONFIG_BLK_DEV_AMD74XX=y
-CONFIG_BLK_DEV_ATIIXP=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_TRIFLEX=y
-CONFIG_BLK_DEV_CY82C693=y
-CONFIG_BLK_DEV_CS5520=y
-CONFIG_BLK_DEV_CS5530=y
-CONFIG_BLK_DEV_HPT34X=y
-# CONFIG_HPT34X_AUTODMA is not set
-CONFIG_BLK_DEV_HPT366=y
-# CONFIG_BLK_DEV_SC1200 is not set
-CONFIG_BLK_DEV_PIIX=y
-# CONFIG_BLK_DEV_NS87415 is not set
-CONFIG_BLK_DEV_PDC202XX_OLD=y
-# CONFIG_PDC202XX_BURST is not set
-CONFIG_BLK_DEV_PDC202XX_NEW=y
-CONFIG_PDC202XX_FORCE=y
-CONFIG_BLK_DEV_SVWKS=y
-CONFIG_BLK_DEV_SIIMAGE=y
-CONFIG_BLK_DEV_SIS5513=y
-CONFIG_BLK_DEV_SLC90E66=y
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=m
-CONFIG_SCSI_FC_ATTRS=m
-CONFIG_SCSI_ISCSI_ATTRS=m
-
-#
-# SCSI low-level drivers
-#
-CONFIG_BLK_DEV_3W_XXXX_RAID=m
-CONFIG_SCSI_3W_9XXX=m
-CONFIG_SCSI_ACARD=m
-CONFIG_SCSI_AACRAID=m
-CONFIG_SCSI_AIC7XXX=m
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-CONFIG_SCSI_AIC7XXX_OLD=m
-CONFIG_SCSI_AIC79XX=m
-CONFIG_AIC79XX_CMDS_PER_DEVICE=4
-CONFIG_AIC79XX_RESET_DELAY_MS=15000
-# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
-# CONFIG_AIC79XX_DEBUG_ENABLE is not set
-CONFIG_AIC79XX_DEBUG_MASK=0
-# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_ADVANSYS is not set
-CONFIG_MEGARAID_NEWGEN=y
-CONFIG_MEGARAID_MM=m
-CONFIG_MEGARAID_MAILBOX=m
-CONFIG_SCSI_SATA=y
-CONFIG_SCSI_SATA_AHCI=m
-CONFIG_SCSI_SATA_SVW=m
-CONFIG_SCSI_ATA_PIIX=y
-CONFIG_SCSI_SATA_NV=m
-CONFIG_SCSI_SATA_PROMISE=m
-CONFIG_SCSI_SATA_QSTOR=m
-CONFIG_SCSI_SATA_SX4=m
-CONFIG_SCSI_SATA_SIL=m
-CONFIG_SCSI_SATA_SIS=m
-CONFIG_SCSI_SATA_ULI=m
-CONFIG_SCSI_SATA_VIA=m
-CONFIG_SCSI_SATA_VITESSE=m
-CONFIG_SCSI_BUSLOGIC=m
-# CONFIG_SCSI_OMIT_FLASHPOINT is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-CONFIG_SCSI_GDTH=m
-CONFIG_SCSI_IPS=m
-CONFIG_SCSI_INITIO=m
-CONFIG_SCSI_INIA100=m
-CONFIG_SCSI_PPA=m
-CONFIG_SCSI_IMM=m
-# CONFIG_SCSI_IZIP_EPP16 is not set
-# CONFIG_SCSI_IZIP_SLOW_CTR is not set
-CONFIG_SCSI_SYM53C8XX_2=m
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-CONFIG_SCSI_QLOGIC_1280=m
-CONFIG_SCSI_QLOGIC_1280_1040=y
-CONFIG_SCSI_QLA2XXX=y
-CONFIG_SCSI_QLA21XX=m
-CONFIG_SCSI_QLA22XX=m
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_LPFC=m
-CONFIG_SCSI_DC395x=m
-CONFIG_SCSI_DC390T=m
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
-CONFIG_FUSION_CTL=m
-CONFIG_FUSION_LAN=m
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-
-#
-# Device Drivers
-#
-CONFIG_IEEE1394_PCILYNX=m
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-CONFIG_IEEE1394_CMP=m
-CONFIG_IEEE1394_AMDTP=m
-
-#
-# I2O device support
-#
-CONFIG_I2O=m
-CONFIG_I2O_CONFIG=m
-CONFIG_I2O_BLOCK=m
-CONFIG_I2O_SCSI=m
-CONFIG_I2O_PROC=m
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -591,10 +175,15 @@
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
@@ -613,8 +202,20 @@
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=m
-CONFIG_IP_TCPDIAG_IPV6=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+
+#
+# TCP congestion control
+#
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
#
# IP: Virtual Server Configuration
@@ -659,6 +260,9 @@
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
#
# IP: Netfilter Configuration
@@ -666,11 +270,15 @@
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_EVENTS=y
+CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+CONFIG_IP_NF_PPTP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -695,14 +303,18 @@
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_REALM=m
CONFIG_IP_NF_MATCH_SCTP=m
+CONFIG_IP_NF_MATCH_DCCP=m
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_CONNBYTES=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+CONFIG_IP_NF_MATCH_STRING=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_TARGET_NFQUEUE=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
@@ -714,12 +326,14 @@
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_NAT_PPTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -749,8 +363,11 @@
CONFIG_IP6_NF_MATCH_PHYSDEV=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_NFQUEUE=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
@@ -776,8 +393,24 @@
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+# CONFIG_IP_DCCP_UNLOAD_HACK is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -812,10 +445,6 @@
CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
-
-#
-# QoS and/or fair queueing
-#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
@@ -853,6 +482,7 @@
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_CLS_POLICE=y
@@ -860,10 +490,6 @@
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m
@@ -950,6 +576,471 @@
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+CONFIG_CONNECTOR=m
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLOCK=m
+CONFIG_MTD_BLOCK_RO=m
+CONFIG_FTL=m
+CONFIG_NFTL=m
+CONFIG_NFTL_RW=y
+CONFIG_INFTL=m
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=m
+CONFIG_MTD_CFI_AMDSTD=m
+CONFIG_MTD_CFI_AMDSTD_RETRY=3
+CONFIG_MTD_CFI_STAA=m
+CONFIG_MTD_CFI_UTIL=m
+CONFIG_MTD_RAM=m
+CONFIG_MTD_ROM=m
+CONFIG_MTD_ABSENT=m
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PNC2000 is not set
+CONFIG_MTD_SC520CDP=m
+CONFIG_MTD_NETSC520=m
+CONFIG_MTD_TS5500=m
+CONFIG_MTD_SBC_GXX=m
+# CONFIG_MTD_AMD76XROM is not set
+# CONFIG_MTD_ICHXROM is not set
+CONFIG_MTD_SCB2_FLASH=m
+# CONFIG_MTD_NETtel is not set
+# CONFIG_MTD_DILNETPC is not set
+# CONFIG_MTD_L440GX is not set
+CONFIG_MTD_PCI=m
+CONFIG_MTD_PLATRAM=m
+
+#
+# Self-contained MTD device drivers
+#
+CONFIG_MTD_PMC551=m
+# CONFIG_MTD_PMC551_BUGFIX is not set
+# CONFIG_MTD_PMC551_DEBUG is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_MTDRAM=m
+CONFIG_MTDRAM_TOTAL_SIZE=4096
+CONFIG_MTDRAM_ERASE_SIZE=128
+# CONFIG_MTD_BLKMTD is not set
+CONFIG_MTD_BLOCK2MTD=m
+
+#
+# Disk-On-Chip Device Drivers
+#
+CONFIG_MTD_DOC2000=m
+# CONFIG_MTD_DOC2001 is not set
+CONFIG_MTD_DOC2001PLUS=m
+CONFIG_MTD_DOCPROBE=m
+CONFIG_MTD_DOCECC=m
+# CONFIG_MTD_DOCPROBE_ADVANCED is not set
+CONFIG_MTD_DOCPROBE_ADDRESS=0
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_1284=y
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+CONFIG_BLK_DEV_FD=m
+CONFIG_PARIDE=m
+CONFIG_PARIDE_PARPORT=m
+
+#
+# Parallel IDE high-level drivers
+#
+CONFIG_PARIDE_PD=m
+CONFIG_PARIDE_PCD=m
+CONFIG_PARIDE_PF=m
+CONFIG_PARIDE_PT=m
+CONFIG_PARIDE_PG=m
+
+#
+# Parallel IDE protocol modules
+#
+CONFIG_PARIDE_ATEN=m
+CONFIG_PARIDE_BPCK=m
+CONFIG_PARIDE_COMM=m
+CONFIG_PARIDE_DSTR=m
+CONFIG_PARIDE_FIT2=m
+CONFIG_PARIDE_FIT3=m
+CONFIG_PARIDE_EPAT=m
+CONFIG_PARIDE_EPATC8=y
+CONFIG_PARIDE_EPIA=m
+CONFIG_PARIDE_FRIQ=m
+CONFIG_PARIDE_FRPW=m
+CONFIG_PARIDE_KBIC=m
+CONFIG_PARIDE_KTTI=m
+CONFIG_PARIDE_ON20=m
+CONFIG_PARIDE_ON26=m
+CONFIG_BLK_CPQ_DA=m
+CONFIG_BLK_CPQ_CISS_DA=m
+CONFIG_CISS_SCSI_TAPE=y
+CONFIG_BLK_DEV_DAC960=m
+CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_SX8=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_LBD=y
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=y
+CONFIG_BLK_DEV_IDESCSI=m
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_CMD640=y
+CONFIG_BLK_DEV_CMD640_ENHANCED=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_RZ1000=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+CONFIG_IDEDMA_PCI_AUTO=y
+# CONFIG_IDEDMA_ONLYDISK is not set
+CONFIG_BLK_DEV_AEC62XX=y
+CONFIG_BLK_DEV_ALI15X3=y
+# CONFIG_WDC_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+CONFIG_BLK_DEV_ATIIXP=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_TRIFLEX=y
+CONFIG_BLK_DEV_CY82C693=y
+CONFIG_BLK_DEV_CS5520=y
+CONFIG_BLK_DEV_CS5530=y
+CONFIG_BLK_DEV_HPT34X=y
+# CONFIG_HPT34X_AUTODMA is not set
+CONFIG_BLK_DEV_HPT366=y
+# CONFIG_BLK_DEV_SC1200 is not set
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_BLK_DEV_IT821X=m
+# CONFIG_BLK_DEV_NS87415 is not set
+CONFIG_BLK_DEV_PDC202XX_OLD=y
+# CONFIG_PDC202XX_BURST is not set
+CONFIG_BLK_DEV_PDC202XX_NEW=y
+CONFIG_PDC202XX_FORCE=y
+CONFIG_BLK_DEV_SVWKS=y
+CONFIG_BLK_DEV_SIIMAGE=y
+CONFIG_BLK_DEV_SIS5513=y
+CONFIG_BLK_DEV_SLC90E66=y
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_IDE_ARM is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+CONFIG_IDEDMA_AUTO=y
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+
+#
+# SCSI low-level drivers
+#
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+CONFIG_MEGARAID_SAS=m
+CONFIG_SCSI_SATA=y
+CONFIG_SCSI_SATA_AHCI=m
+CONFIG_SCSI_SATA_SVW=m
+CONFIG_SCSI_ATA_PIIX=y
+CONFIG_SCSI_SATA_MV=m
+CONFIG_SCSI_SATA_NV=m
+CONFIG_SCSI_SATA_PROMISE=m
+CONFIG_SCSI_SATA_QSTOR=m
+CONFIG_SCSI_SATA_SX4=m
+CONFIG_SCSI_SATA_SIL=m
+CONFIG_SCSI_SATA_SIS=m
+CONFIG_SCSI_SATA_ULI=m
+CONFIG_SCSI_SATA_VIA=m
+CONFIG_SCSI_SATA_VITESSE=m
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
+CONFIG_SCSI_BUSLOGIC=m
+# CONFIG_SCSI_OMIT_FLASHPOINT is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+CONFIG_SCSI_INIA100=m
+CONFIG_SCSI_PPA=m
+CONFIG_SCSI_IMM=m
+# CONFIG_SCSI_IZIP_EPP16 is not set
+# CONFIG_SCSI_IZIP_SLOW_CTR is not set
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=m
+CONFIG_SCSI_QLOGIC_1280_1040=y
+CONFIG_SCSI_QLA2XXX=y
+CONFIG_SCSI_QLA21XX=m
+CONFIG_SCSI_QLA22XX=m
+CONFIG_SCSI_QLA2300=m
+CONFIG_SCSI_QLA2322=m
+CONFIG_SCSI_QLA6312=m
+CONFIG_SCSI_QLA24XX=m
+CONFIG_SCSI_LPFC=m
+CONFIG_SCSI_DC395x=m
+CONFIG_SCSI_DC390T=m
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID5=m
+CONFIG_MD_RAID6=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+CONFIG_FUSION_SAS=m
+CONFIG_FUSION_MAX_SGE=128
+CONFIG_FUSION_CTL=m
+CONFIG_FUSION_LAN=m
+
+#
+# IEEE 1394 (FireWire) support
+#
+CONFIG_IEEE1394=m
+
+#
+# Subsystem Options
+#
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+CONFIG_IEEE1394_OUI_DB=y
+CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
+CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
+# CONFIG_IEEE1394_EXPORT_FULL_API is not set
+
+#
+# Device Drivers
+#
+CONFIG_IEEE1394_PCILYNX=m
+CONFIG_IEEE1394_OHCI1394=m
+
+#
+# Protocol Drivers
+#
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_SBP2=m
+# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_DV1394=m
+CONFIG_IEEE1394_RAWIO=m
+CONFIG_IEEE1394_CMP=m
+CONFIG_IEEE1394_AMDTP=m
+
+#
+# I2O device support
+#
+CONFIG_I2O=m
+CONFIG_I2O_EXT_ADAPTEC=y
+CONFIG_I2O_EXT_ADAPTEC_DMA64=y
+CONFIG_I2O_CONFIG=m
+CONFIG_I2O_CONFIG_OLD_IOCTL=y
+CONFIG_I2O_BUS=m
+CONFIG_I2O_BLOCK=m
+CONFIG_I2O_SCSI=m
+CONFIG_I2O_PROC=m
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
@@ -962,12 +1053,28 @@
# CONFIG_ARCNET is not set
#
+# PHY device support
+#
+CONFIG_PHYLIB=m
+CONFIG_PHYCONTROL=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+
+#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
@@ -984,6 +1091,7 @@
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
+CONFIG_ULI526X=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
@@ -1011,6 +1119,10 @@
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
+CONFIG_NET_POCKET=y
+CONFIG_ATP=m
+CONFIG_DE600=m
+CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
@@ -1026,6 +1138,8 @@
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
CONFIG_SK98LIN=m
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
@@ -1034,6 +1148,7 @@
#
# Ethernet (10000 Mbit)
#
+CONFIG_CHELSIO_T1=m
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
@@ -1063,9 +1178,15 @@
#
# Wireless 802.11b ISA/PCI cards support
#
+CONFIG_IPW2100=m
+CONFIG_IPW2100_MONITOR=y
+# CONFIG_IPW_DEBUG is not set
+CONFIG_IPW2200=m
+CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
+CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
@@ -1074,6 +1195,10 @@
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
+CONFIG_HOSTAP=m
+# CONFIG_HOSTAP_FIRMWARE is not set
+CONFIG_HOSTAP_PLX=m
+CONFIG_HOSTAP_PCI=m
CONFIG_NET_WIRELESS=y
#
@@ -1124,6 +1249,10 @@
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_RX is not set
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
@@ -1325,9 +1454,7 @@
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
-CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
-CONFIG_GAMEPORT_CS461X=m
#
# Character devices
@@ -1380,13 +1507,17 @@
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
+CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
+CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_SC1200_WDT=m
# CONFIG_60XX_WDT is not set
+CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
+CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
#
@@ -1414,9 +1545,11 @@
# CONFIG_AGP is not set
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
-# CONFIG_DRM_GAMMA is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
@@ -1469,14 +1602,45 @@
CONFIG_I2C_PCA_ISA=m
#
-# Hardware Sensors Chip support
-#
-CONFIG_I2C_SENSOR=m
+# Miscellaneous I2C Chip support
+#
+CONFIG_SENSORS_DS1337=m
+CONFIG_SENSORS_DS1374=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_RTC8564=m
+CONFIG_SENSORS_MAX6875=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Dallas's 1-wire bus
+#
+CONFIG_W1=m
+CONFIG_W1_MATROX=m
+CONFIG_W1_DS9490=m
+CONFIG_W1_DS9490_BRIDGE=m
+CONFIG_W1_THERM=m
+CONFIG_W1_SMEM=m
+CONFIG_W1_DS2433=m
+# CONFIG_W1_DS2433_CRC is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
+CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
@@ -1495,36 +1659,17 @@
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
-CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
-
-#
-# Other I2C Chip support
-#
-CONFIG_SENSORS_DS1337=m
-CONFIG_SENSORS_EEPROM=m
-CONFIG_SENSORS_PCF8574=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
+CONFIG_SENSORS_W83627EHF=m
+CONFIG_SENSORS_HDAPS=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
@@ -1532,6 +1677,10 @@
# CONFIG_IBM_ASM is not set
#
+# Multimedia Capabilities Port drivers
+#
+
+#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
@@ -1544,6 +1693,7 @@
# Video Adapters
#
CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
@@ -1597,11 +1747,20 @@
#
# Supported USB Adapters
#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
-CONFIG_DVB_DIBUSB=m
-CONFIG_DVB_DIBUSB_MISDESIGNED_DEVICES=y
-# CONFIG_DVB_DIBCOM_DEBUG is not set
CONFIG_DVB_CINERGYT2=m
CONFIG_DVB_CINERGYT2_TUNING=y
CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
@@ -1617,12 +1776,16 @@
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
-CONFIG_DVB_B2C2_SKYSTAR=m
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
#
# Supported DVB Frontends
@@ -1641,6 +1804,7 @@
CONFIG_DVB_TDA80XX=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
+CONFIG_DVB_S5H1420=m
#
# DVB-T (terrestrial) frontends
@@ -1670,6 +1834,8 @@
CONFIG_DVB_NXT2002=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
@@ -1694,6 +1860,7 @@
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
@@ -1730,6 +1897,7 @@
CONFIG_FB_3DFX=m
CONFIG_FB_3DFX_ACCEL=y
CONFIG_FB_VOODOO1=m
+CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
# CONFIG_FB_PM3 is not set
@@ -1780,8 +1948,10 @@
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
+CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_GENERIC_DRIVER=y
#
# Generic devices
@@ -1794,11 +1964,12 @@
CONFIG_SND_MTPAV=m
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_AC97_BUS=m
#
# PCI devices
#
-CONFIG_SND_AC97_CODEC=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
@@ -1821,8 +1992,10 @@
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
+CONFIG_SND_AD1889=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
@@ -1867,6 +2040,7 @@
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
@@ -1875,6 +2049,7 @@
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
@@ -1884,12 +2059,11 @@
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
-CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
@@ -1906,6 +2080,7 @@
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ONETOUCH=y
#
# USB Input Devices
@@ -1919,12 +2094,17 @@
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
+CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_MTOUCH=m
+CONFIG_USB_ITMTOUCH=m
CONFIG_USB_EGALAX=m
+CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
+CONFIG_USB_KEYSPAN_REMOTE=m
+CONFIG_USB_APPLETOUCH=m
#
# USB Imaging devices
@@ -1955,32 +2135,21 @@
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
-
-#
-# USB Host-to-Host Cables
-#
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
-CONFIG_USB_GENESYS=y
-CONFIG_USB_NET1080=y
-CONFIG_USB_PL2301=y
-CONFIG_USB_KC2190=y
-
-#
-# Intelligent USB Devices/Gadgets
-#
CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_ZAURUS=y
-CONFIG_USB_CDCETHER=y
-
-#
-# USB Network Adapters
-#
-CONFIG_USB_AX8817X=y
+# CONFIG_USB_EPSON2888 is not set
+CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_ZD1201=m
-CONFIG_USB_MON=m
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -2049,13 +2218,17 @@
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_SISUSBVGA=m
+# CONFIG_USB_SISUSBVGA_CON is not set
+CONFIG_USB_LD=m
CONFIG_USB_TEST=m
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
@@ -2074,14 +2247,22 @@
# InfiniBand support
#
CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_MTHCA=m
# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
#
+# SN Devices
+#
+
+#
# Firmware Drivers
#
+CONFIG_DELL_RBU=m
+CONFIG_DCDBAS=m
#
# File systems
@@ -2090,6 +2271,8 @@
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
@@ -2109,18 +2292,15 @@
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
-CONFIG_XFS_QUOTA=y
+CONFIG_XFS_QUOTA=m
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
+CONFIG_INOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -2128,6 +2308,7 @@
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
@@ -2155,14 +2336,10 @@
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS_XATTR=y
-CONFIG_DEVPTS_FS_SECURITY=y
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-CONFIG_TMPFS_SECURITY=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+CONFIG_RELAYFS_FS=m
#
# Miscellaneous filesystems
@@ -2178,8 +2355,7 @@
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_NAND=y
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -2198,15 +2374,18 @@
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -2229,6 +2408,7 @@
CONFIG_NCPFS_EXTRAS=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
#
# Partition Types
@@ -2306,12 +2486,14 @@
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_FS is not set
+# CONFIG_FRAME_POINTER is not set
# CONFIG_INIT_DEBUG is not set
# CONFIG_KPROBES is not set
@@ -2340,7 +2522,7 @@
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
@@ -2351,6 +2533,7 @@
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
@@ -2393,7 +2576,12 @@
# Library routines
#
CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
diff -r 9a05a503897c -r 4b06313b9790 buildconfigs/mk.linux-2.6-xen
--- a/buildconfigs/mk.linux-2.6-xen Tue Jan 31 18:55:55 2006
+++ b/buildconfigs/mk.linux-2.6-xen Tue Jan 31 19:55:22 2006
@@ -2,7 +2,7 @@
OS = linux
LINUX_SERIES = 2.6
-LINUX_VER = 2.6.12
+LINUX_VER = 2.6.14
EXTRAVERSION ?= xen
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/i386/Kconfig
--- a/linux-2.6-xen-sparse/arch/i386/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/Kconfig Tue Jan 31 19:55:22 2006
@@ -14,6 +14,10 @@
486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
config MMU
bool
default y
@@ -30,6 +34,10 @@
default y
config GENERIC_IOMAP
+ bool
+ default y
+
+config ARCH_MAY_HAVE_PC_FDC
bool
default y
@@ -77,7 +85,6 @@
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
- select DISCONTIGMEM
select NUMA
help
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
@@ -465,8 +472,9 @@
Choose N to continue using the legacy 8254 timer.
config HPET_EMULATE_RTC
- bool "Provide RTC interrupt"
+ bool
depends on HPET_TIMER && RTC=y
+ default y
config SMP
bool "Symmetric multi-processing support"
@@ -534,29 +542,7 @@
cost of slightly increased overhead in some places. If unsure say
N here.
-config PREEMPT
- bool "Preemptible Kernel"
- depends on !X86_XEN
- help
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load.
-
- Say Y here if you are building a kernel for a desktop, embedded
- or real-time system. Say N if you are unsure.
-
-config PREEMPT_BKL
- bool "Preempt The Big Kernel Lock"
- depends on PREEMPT
- default y
- help
- This option reduces the latency of the kernel by making the
- big kernel lock preemptible.
-
- Say Y here if you are building a kernel for a desktop system.
- Say N if you are unsure.
+source "kernel/Kconfig.preempt"
config X86_UP_APIC
bool "Local APIC support on uniprocessors"
@@ -805,6 +791,7 @@
depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH ||
(X86_SUMMIT && ACPI))
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
+ select SPARSEMEM_STATIC
# Need comments to help the hapless user trying to turn on NUMA support
comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
@@ -813,25 +800,48 @@
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
-config DISCONTIGMEM
+config HAVE_ARCH_BOOTMEM_NODE
bool
depends on NUMA
default y
-config HAVE_ARCH_BOOTMEM_NODE
+config ARCH_HAVE_MEMORY_PRESENT
+ bool
+ depends on DISCONTIGMEM
+ default y
+
+config NEED_NODE_MEMMAP_SIZE
+ bool
+ depends on DISCONTIGMEM || SPARSEMEM
+ default y
+
+config HAVE_ARCH_ALLOC_REMAP
bool
depends on NUMA
default y
-config HAVE_MEMORY_PRESENT
- bool
- depends on DISCONTIGMEM
- default y
-
-config NEED_NODE_MEMMAP_SIZE
- bool
- depends on DISCONTIGMEM
- default y
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ depends on NUMA
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on NUMA
+
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+ depends on ARCH_SPARSEMEM_ENABLE
+
+source "mm/Kconfig"
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ bool
+ default y
+ depends on NUMA
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
@@ -930,11 +940,6 @@
The default yes will allow the kernel to do irq load balancing.
Saying no will keep the kernel from doing irq load balancing.
-config HAVE_DEC_LOCK
- bool
- depends on (SMP || PREEMPT) && X86_CMPXCHG
- default y
-
# turning this on wastes a bunch of space.
# Summit needs it only when NUMA is on
config BOOT_IOREMAP
@@ -972,6 +977,43 @@
If unsure, say Y. Only embedded should say N here.
+source kernel/Kconfig.hz
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if EMBEDDED
+ default "0x100000"
+ help
+ This gives the physical address where the kernel is loaded.
+ Primarily used in the case of kexec on panic where the
+ fail safe kernel needs to run at a different address than
+ the panic-ed kernel.
+
+ Don't change this unless you know what you are doing.
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && !X86_XEN
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config CRASH_DUMP
+ bool "kernel crash dumps (EXPERIMENTAL)"
+ depends on EMBEDDED
+ depends on EXPERIMENTAL
+ depends on HIGHMEM
+ help
+ Generate crash dump after being started by kexec.
endmenu
@@ -1201,7 +1243,6 @@
config PCI_MMCONFIG
bool
depends on PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
- select ACPI_BOOT
default y
source "drivers/pci/pcie/Kconfig"
@@ -1264,6 +1305,15 @@
This support is also available as a module. If compiled as a
module, it will be called scx200.
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && HOTPLUG && EXPERIMENTAL
+ ---help---
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu.
+
+ Say N.
+
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
@@ -1275,6 +1325,8 @@
source "fs/Kconfig.binfmt"
endmenu
+
+source "net/Kconfig"
source "drivers/Kconfig"
@@ -1305,6 +1357,11 @@
bool
default y
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
+ default y
+
config X86_SMP
bool
depends on SMP && !X86_VOYAGER
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/i386/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/Makefile Tue Jan 31 19:55:22 2006
@@ -174,15 +174,6 @@
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
endif
-prepare: include/asm-$(ARCH)/asm_offsets.h
-CLEAN_FILES += include/asm-$(ARCH)/asm_offsets.h
-
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
- include/config/MARKER
-
-include/asm-$(ARCH)/asm_offsets.h: arch/$(ARCH)/kernel/asm-offsets.s
- $(call filechk,gen-asm-offsets)
-
archclean:
$(Q)$(MAKE) $(clean)=arch/i386/boot
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/kernel/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/Makefile Tue Jan 31 19:55:22 2006
@@ -7,11 +7,11 @@
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o vm86.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- doublefault.o quirks.o
+ doublefault.o quirks.o i8237.o
obj-y += cpu/
obj-y += timers/
-obj-$(CONFIG_ACPI_BOOT) += acpi/
+obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca.o
obj-$(CONFIG_X86_MSR) += msr.o
@@ -24,6 +24,7 @@
obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_X86_NUMAQ) += numaq.o
obj-$(CONFIG_X86_SUMMIT_NUMA) += summit.o
obj-$(CONFIG_KPROBES) += kprobes.o
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/acpi/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/kernel/acpi/Makefile Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/acpi/Makefile Tue Jan 31
19:55:22 2006
@@ -1,6 +1,10 @@
-obj-$(CONFIG_ACPI_BOOT) := boot.o
+obj-y := boot.o
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
+
+ifneq ($(CONFIG_ACPI_PROCESSOR),)
+obj-y += cstate.o
+endif
ifdef CONFIG_XEN
include $(srctree)/scripts/Makefile.xen
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c Tue Jan 31
19:55:22 2006
@@ -27,14 +27,14 @@
#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/efi.h>
+#include <linux/module.h>
+#include <linux/dmi.h>
#include <linux/irq.h>
-#include <linux/module.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/io.h>
-#include <asm/irq.h>
#include <asm/mpspec.h>
#ifdef CONFIG_XEN
#include <asm/fixmap.h>
@@ -42,19 +42,25 @@
#ifdef CONFIG_X86_64
-static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id) { }
+static inline void acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+}
extern void __init clustered_apic_check(void);
-static inline int ioapic_setup_disabled(void) { return 0; }
+static inline int ioapic_setup_disabled(void)
+{
+ return 0;
+}
+
#include <asm/proto.h>
-#else /* X86 */
+#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
#include <mach_apic.h>
#include <mach_mpparse.h>
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#endif /* X86 */
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#endif /* X86 */
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
@@ -62,13 +68,8 @@
#define PREFIX "ACPI: "
-#ifdef CONFIG_ACPI_PCI
int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
-int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization
*/
-#else
-int acpi_noirq __initdata = 1;
-int acpi_pci_disabled __initdata = 1;
-#endif
+int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ
initialization */
int acpi_ht __initdata = 1; /* enable HT */
int acpi_lapic;
@@ -90,7 +91,7 @@
#define MAX_MADT_ENTRIES 256
u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
- { [0 ... MAX_MADT_ENTRIES-1] = 0xff };
+ {[0 ... MAX_MADT_ENTRIES - 1] = 0xff };
EXPORT_SYMBOL(x86_acpiid_to_apicid);
/* --------------------------------------------------------------------------
@@ -101,7 +102,7 @@
* The default interrupt routing model is PIC (8259). This gets
* overriden if IOAPICs are enumerated (below).
*/
-enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
+enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
#if defined(CONFIG_X86_64) && !defined(CONFIG_XEN)
@@ -109,7 +110,7 @@
char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
{
if (!phys_addr || !size)
- return NULL;
+ return NULL;
if (phys_addr < (end_pfn_map << PAGE_SHIFT))
return __va(phys_addr);
@@ -137,8 +138,8 @@
int idx;
#ifndef CONFIG_XEN
- if (phys + size < 8*1024*1024)
- return __va(phys);
+ if (phys + size < 8 * 1024 * 1024)
+ return __va(phys);
#endif
offset = phys & (PAGE_SIZE - 1);
@@ -158,49 +159,72 @@
mapped_size += PAGE_SIZE;
}
- return ((unsigned char *) base + offset);
+ return ((unsigned char *)base + offset);
}
#endif
#ifdef CONFIG_PCI_MMCONFIG
-static int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
+struct acpi_table_mcfg_config *pci_mmcfg_config;
+int pci_mmcfg_config_num;
+
+int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
{
struct acpi_table_mcfg *mcfg;
+ unsigned long i;
+ int config_size;
if (!phys_addr || !size)
return -EINVAL;
- mcfg = (struct acpi_table_mcfg *) __acpi_map_table(phys_addr, size);
+ mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
if (!mcfg) {
printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
return -ENODEV;
}
- if (mcfg->base_reserved) {
- printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n");
+ /* how many config structures do we have */
+ pci_mmcfg_config_num = 0;
+ i = size - sizeof(struct acpi_table_mcfg);
+ while (i >= sizeof(struct acpi_table_mcfg_config)) {
+ ++pci_mmcfg_config_num;
+ i -= sizeof(struct acpi_table_mcfg_config);
+ };
+ if (pci_mmcfg_config_num == 0) {
+ printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
return -ENODEV;
}
- pci_mmcfg_base_addr = mcfg->base_address;
-
- return 0;
-}
-#else
-#define acpi_parse_mcfg NULL
-#endif /* !CONFIG_PCI_MMCONFIG */
+ config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
+ pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
+ if (!pci_mmcfg_config) {
+ printk(KERN_WARNING PREFIX
+ "No memory for MCFG config tables\n");
+ return -ENOMEM;
+ }
+
+ memcpy(pci_mmcfg_config, &mcfg->config, config_size);
+ for (i = 0; i < pci_mmcfg_config_num; ++i) {
+ if (mcfg->config[i].base_reserved) {
+ printk(KERN_ERR PREFIX
+ "MMCONFIG not in low 4GB of memory\n");
+ return -ENODEV;
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PCI_MMCONFIG */
#ifdef CONFIG_X86_LOCAL_APIC
-static int __init
-acpi_parse_madt (
- unsigned long phys_addr,
- unsigned long size)
-{
- struct acpi_table_madt *madt = NULL;
+static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
+{
+ struct acpi_table_madt *madt = NULL;
if (!phys_addr || !size)
return -EINVAL;
- madt = (struct acpi_table_madt *) __acpi_map_table(phys_addr, size);
+ madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
if (!madt) {
printk(KERN_WARNING PREFIX "Unable to map MADT\n");
return -ENODEV;
@@ -210,22 +234,20 @@
acpi_lapic_addr = (u64) madt->lapic_address;
printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
- madt->lapic_address);
+ madt->lapic_address);
}
acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
-
- return 0;
-}
-
+
+ return 0;
+}
static int __init
-acpi_parse_lapic (
- acpi_table_entry_header *header, const unsigned long end)
-{
- struct acpi_table_lapic *processor = NULL;
-
- processor = (struct acpi_table_lapic*) header;
+acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
+{
+ struct acpi_table_lapic *processor = NULL;
+
+ processor = (struct acpi_table_lapic *)header;
if (BAD_MADT_ENTRY(processor, end))
return -EINVAL;
@@ -238,20 +260,19 @@
x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
- mp_register_lapic (
- processor->id, /* APIC ID */
- processor->flags.enabled); /* Enabled? */
+ mp_register_lapic(processor->id, /* APIC ID */
+ processor->flags.enabled); /* Enabled? */
return 0;
}
static int __init
-acpi_parse_lapic_addr_ovr (
- acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
+ const unsigned long end)
{
struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
- lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr*) header;
+ lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header;
if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
return -EINVAL;
@@ -262,12 +283,11 @@
}
static int __init
-acpi_parse_lapic_nmi (
- acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_lapic_nmi *lapic_nmi = NULL;
- lapic_nmi = (struct acpi_table_lapic_nmi*) header;
+ lapic_nmi = (struct acpi_table_lapic_nmi *)header;
if (BAD_MADT_ENTRY(lapic_nmi, end))
return -EINVAL;
@@ -280,37 +300,32 @@
return 0;
}
-
-#endif /*CONFIG_X86_LOCAL_APIC*/
-
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+#endif /*CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
static int __init
-acpi_parse_ioapic (
- acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_ioapic *ioapic = NULL;
- ioapic = (struct acpi_table_ioapic*) header;
+ ioapic = (struct acpi_table_ioapic *)header;
if (BAD_MADT_ENTRY(ioapic, end))
return -EINVAL;
-
+
acpi_table_print_madt_entry(header);
- mp_register_ioapic (
- ioapic->id,
- ioapic->address,
- ioapic->global_irq_base);
-
+ mp_register_ioapic(ioapic->id,
+ ioapic->address, ioapic->global_irq_base);
+
return 0;
}
/*
* Parse Interrupt Source Override for the ACPI SCI
*/
-static void
-acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
+static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
{
if (trigger == 0) /* compatible SCI trigger is level */
trigger = 3;
@@ -326,7 +341,7 @@
polarity = acpi_sci_flags.polarity;
/*
- * mp_config_acpi_legacy_irqs() already setup IRQs < 16
+ * mp_config_acpi_legacy_irqs() already setup IRQs < 16
* If GSI is < 16, this will update its flags,
* else it will create a new mp_irqs[] entry.
*/
@@ -341,12 +356,12 @@
}
static int __init
-acpi_parse_int_src_ovr (
- acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_int_src_ovr(acpi_table_entry_header * header,
+ const unsigned long end)
{
struct acpi_table_int_src_ovr *intsrc = NULL;
- intsrc = (struct acpi_table_int_src_ovr*) header;
+ intsrc = (struct acpi_table_int_src_ovr *)header;
if (BAD_MADT_ENTRY(intsrc, end))
return -EINVAL;
@@ -355,33 +370,30 @@
if (intsrc->bus_irq == acpi_fadt.sci_int) {
acpi_sci_ioapic_setup(intsrc->global_irq,
- intsrc->flags.polarity, intsrc->flags.trigger);
+ intsrc->flags.polarity,
+ intsrc->flags.trigger);
return 0;
}
if (acpi_skip_timer_override &&
- intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
- printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
- return 0;
- }
-
- mp_override_legacy_irq (
- intsrc->bus_irq,
- intsrc->flags.polarity,
- intsrc->flags.trigger,
- intsrc->global_irq);
-
- return 0;
-}
-
+ intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+ printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+ return 0;
+ }
+
+ mp_override_legacy_irq(intsrc->bus_irq,
+ intsrc->flags.polarity,
+ intsrc->flags.trigger, intsrc->global_irq);
+
+ return 0;
+}
static int __init
-acpi_parse_nmi_src (
- acpi_table_entry_header *header, const unsigned long end)
+acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_nmi_src *nmi_src = NULL;
- nmi_src = (struct acpi_table_nmi_src*) header;
+ nmi_src = (struct acpi_table_nmi_src *)header;
if (BAD_MADT_ENTRY(nmi_src, end))
return -EINVAL;
@@ -393,9 +405,7 @@
return 0;
}
-#endif /* CONFIG_X86_IO_APIC */
-
-#ifdef CONFIG_ACPI_BUS
+#endif /* CONFIG_X86_IO_APIC */
/*
* acpi_pic_sci_set_trigger()
@@ -411,8 +421,7 @@
* ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
*/
-void __init
-acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
+void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
{
unsigned int mask = 1 << irq;
unsigned int old, new;
@@ -432,10 +441,10 @@
* routing tables..
*/
switch (trigger) {
- case 1: /* Edge - clear */
+ case 1: /* Edge - clear */
new &= ~mask;
break;
- case 3: /* Level - set */
+ case 3: /* Level - set */
new |= mask;
break;
}
@@ -448,21 +457,22 @@
outb(new >> 8, 0x4d1);
}
-
-#endif /* CONFIG_ACPI_BUS */
-
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
#ifdef CONFIG_X86_IO_APIC
if (use_pci_vector() && !platform_legacy_irq(gsi))
- *irq = IO_APIC_VECTOR(gsi);
+ *irq = IO_APIC_VECTOR(gsi);
else
#endif
*irq = gsi;
return 0;
}
-unsigned int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
+/*
+ * success: return IRQ number (>=0)
+ * failure: return < 0
+ */
+int acpi_register_gsi(u32 gsi, int edge_level, int active_high_low)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
@@ -475,7 +485,7 @@
extern void eisa_set_level_irq(unsigned int irq);
if (edge_level == ACPI_LEVEL_SENSITIVE)
- eisa_set_level_irq(gsi);
+ eisa_set_level_irq(gsi);
}
#endif
@@ -487,45 +497,59 @@
acpi_gsi_to_irq(plat_gsi, &irq);
return irq;
}
+
EXPORT_SYMBOL(acpi_register_gsi);
/*
* ACPI based hotplug support for CPU
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
-int
-acpi_map_lsapic(acpi_handle handle, int *pcpu)
+int acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
/* TBD */
return -EINVAL;
}
+
EXPORT_SYMBOL(acpi_map_lsapic);
-
-int
-acpi_unmap_lsapic(int cpu)
+int acpi_unmap_lsapic(int cpu)
{
/* TBD */
return -EINVAL;
}
+
EXPORT_SYMBOL(acpi_unmap_lsapic);
-#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+#endif /* CONFIG_ACPI_HOTPLUG_CPU */
+
+int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
+{
+ /* TBD */
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(acpi_register_ioapic);
+
+int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
+{
+ /* TBD */
+ return -EINVAL;
+}
+
+EXPORT_SYMBOL(acpi_unregister_ioapic);
static unsigned long __init
-acpi_scan_rsdp (
- unsigned long start,
- unsigned long length)
-{
- unsigned long offset = 0;
- unsigned long sig_len = sizeof("RSD PTR ") - 1;
- unsigned long vstart = (unsigned long)isa_bus_to_virt(start);
+acpi_scan_rsdp (unsigned long start, unsigned long length)
+{
+ unsigned long offset = 0;
+ unsigned long sig_len = sizeof("RSD PTR ") - 1;
+ unsigned long vstart = (unsigned long)isa_bus_to_virt(start);
/*
* Scan all 16-byte boundaries of the physical memory region for the
* RSDP signature.
*/
for (offset = 0; offset < length; offset += 16) {
- if (strncmp((char *) (vstart + offset), "RSD PTR ", sig_len))
+ if (strncmp((char *)(vstart + offset), "RSD PTR ", sig_len))
continue;
return (start + offset);
}
@@ -538,19 +562,18 @@
struct acpi_table_sbf *sb;
if (!phys_addr || !size)
- return -EINVAL;
-
- sb = (struct acpi_table_sbf *) __acpi_map_table(phys_addr, size);
+ return -EINVAL;
+
+ sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size);
if (!sb) {
printk(KERN_WARNING PREFIX "Unable to map SBF\n");
return -ENODEV;
}
- sbf_port = sb->sbf_cmos; /* Save CMOS port */
-
- return 0;
-}
-
+ sbf_port = sb->sbf_cmos; /* Save CMOS port */
+
+ return 0;
+}
#ifdef CONFIG_HPET_TIMER
@@ -561,7 +584,7 @@
if (!phys || !size)
return -EINVAL;
- hpet_tbl = (struct acpi_table_hpet *) __acpi_map_table(phys, size);
+ hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size);
if (!hpet_tbl) {
printk(KERN_WARNING PREFIX "Unable to map HPET\n");
return -ENODEV;
@@ -572,22 +595,21 @@
"memory.\n");
return -1;
}
-
#ifdef CONFIG_X86_64
- vxtime.hpet_address = hpet_tbl->addr.addrl |
- ((long) hpet_tbl->addr.addrh << 32);
-
- printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
- hpet_tbl->id, vxtime.hpet_address);
-#else /* X86 */
+ vxtime.hpet_address = hpet_tbl->addr.addrl |
+ ((long)hpet_tbl->addr.addrh << 32);
+
+ printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
+ hpet_tbl->id, vxtime.hpet_address);
+#else /* X86 */
{
extern unsigned long hpet_address;
hpet_address = hpet_tbl->addr.addrl;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
- hpet_tbl->id, hpet_address);
- }
-#endif /* X86 */
+ hpet_tbl->id, hpet_address);
+ }
+#endif /* X86 */
return 0;
}
@@ -603,28 +625,25 @@
{
struct fadt_descriptor_rev2 *fadt = NULL;
- fadt = (struct fadt_descriptor_rev2*) __acpi_map_table(phys,size);
- if(!fadt) {
+ fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size);
+ if (!fadt) {
printk(KERN_WARNING PREFIX "Unable to map FADT\n");
return 0;
}
-
-#ifdef CONFIG_ACPI_INTERPRETER
/* initialize sci_int early for INT_SRC_OVR MADT parsing */
acpi_fadt.sci_int = fadt->sci_int;
-#endif
-
-#ifdef CONFIG_ACPI_BUS
+
/* initialize rev and apic_phys_dest_mode for x86_64 genapic */
acpi_fadt.revision = fadt->revision;
- acpi_fadt.force_apic_physical_destination_mode =
fadt->force_apic_physical_destination_mode;
-#endif
+ acpi_fadt.force_apic_physical_destination_mode =
+ fadt->force_apic_physical_destination_mode;
#if defined(CONFIG_X86_PM_TIMER) && !defined(CONFIG_XEN)
/* detect the location of the ACPI PM Timer */
if (fadt->revision >= FADT2_REVISION_ID) {
/* FADT rev. 2 */
- if (fadt->xpm_tmr_blk.address_space_id !=
ACPI_ADR_SPACE_SYSTEM_IO)
+ if (fadt->xpm_tmr_blk.address_space_id !=
+ ACPI_ADR_SPACE_SYSTEM_IO)
return 0;
pmtmr_ioport = fadt->xpm_tmr_blk.address;
@@ -633,16 +652,15 @@
pmtmr_ioport = fadt->V1_pm_tmr_blk;
}
if (pmtmr_ioport)
- printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
pmtmr_ioport);
-#endif
- return 0;
-}
-
-
-unsigned long __init
-acpi_find_rsdp (void)
-{
- unsigned long rsdp_phys = 0;
+ printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
+ pmtmr_ioport);
+#endif
+ return 0;
+}
+
+unsigned long __init acpi_find_rsdp(void)
+{
+ unsigned long rsdp_phys = 0;
if (efi_enabled) {
if (efi.acpi20)
@@ -654,9 +672,9 @@
* Scan memory looking for the RSDP signature. First search EBDA (low
* memory) paragraphs and then search upper memory (E0000-FFFFF).
*/
- rsdp_phys = acpi_scan_rsdp (0, 0x400);
+ rsdp_phys = acpi_scan_rsdp(0, 0x400);
if (!rsdp_phys)
- rsdp_phys = acpi_scan_rsdp (0xE0000, 0x20000);
+ rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000);
return rsdp_phys;
}
@@ -666,8 +684,7 @@
* Parse LAPIC entries in MADT
* returns 0 on success, < 0 on error
*/
-static int __init
-acpi_parse_madt_lapic_entries(void)
+static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
@@ -676,28 +693,31 @@
* and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
- count = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR,
acpi_parse_lapic_addr_ovr, 0);
+ count =
+ acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR,
+ acpi_parse_lapic_addr_ovr, 0);
if (count < 0) {
- printk(KERN_ERR PREFIX "Error parsing LAPIC address override
entry\n");
+ printk(KERN_ERR PREFIX
+ "Error parsing LAPIC address override entry\n");
return count;
}
mp_register_lapic_address(acpi_lapic_addr);
count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
- MAX_APICS);
- if (!count) {
+ MAX_APICS);
+ if (!count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
/* TBD: Cleanup to allow fallback to MPS */
return -ENODEV;
- }
- else if (count < 0) {
+ } else if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
- count = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI,
acpi_parse_lapic_nmi, 0);
+ count =
+ acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* TBD: Cleanup to allow fallback to MPS */
@@ -705,15 +725,14 @@
}
return 0;
}
-#endif /* CONFIG_X86_LOCAL_APIC */
-
-#if defined(CONFIG_X86_IO_APIC) && defined(CONFIG_ACPI_INTERPRETER)
+#endif /* CONFIG_X86_LOCAL_APIC */
+
+#ifdef CONFIG_X86_IO_APIC
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
*/
-static int __init
-acpi_parse_madt_ioapic_entries(void)
+static int __init acpi_parse_madt_ioapic_entries(void)
{
int count;
@@ -725,30 +744,34 @@
*/
if (acpi_disabled || acpi_noirq) {
return -ENODEV;
- }
-
- /*
- * if "noapic" boot option, don't look for IO-APICs
+ }
+
+ /*
+ * if "noapic" boot option, don't look for IO-APICs
*/
if (skip_ioapic_setup) {
printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
- "due to 'noapic' option.\n");
+ "due to 'noapic' option.\n");
return -ENODEV;
}
- count = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic,
MAX_IO_APICS);
+ count =
+ acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic,
+ MAX_IO_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
return -ENODEV;
- }
- else if (count < 0) {
+ } else if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
return count;
}
- count = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR,
acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
+ count =
+ acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr,
+ NR_IRQ_VECTORS);
if (count < 0) {
- printk(KERN_ERR PREFIX "Error parsing interrupt source
overrides entry\n");
+ printk(KERN_ERR PREFIX
+ "Error parsing interrupt source overrides entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
@@ -763,7 +786,9 @@
/* Fill in identity legacy mapings where no override */
mp_config_acpi_legacy_irqs();
- count = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src,
NR_IRQ_VECTORS);
+ count =
+ acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src,
+ NR_IRQ_VECTORS);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
@@ -777,11 +802,9 @@
{
return -1;
}
-#endif /* !(CONFIG_X86_IO_APIC && CONFIG_ACPI_INTERPRETER) */
-
-
-static void __init
-acpi_process_madt(void)
+#endif /* !CONFIG_X86_IO_APIC */
+
+static void __init acpi_process_madt(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
int count, error;
@@ -796,6 +819,9 @@
if (!error) {
acpi_lapic = 1;
+#ifdef CONFIG_X86_GENERICARCH
+ generic_bigsmp_probe();
+#endif
/*
* Parse MADT IO-APIC entries
*/
@@ -813,13 +839,226 @@
/*
* Dell Precision Workstation 410, 610 come here.
*/
- printk(KERN_ERR PREFIX "Invalid BIOS MADT, disabling
ACPI\n");
+ printk(KERN_ERR PREFIX
+ "Invalid BIOS MADT, disabling ACPI\n");
disable_acpi();
}
}
#endif
return;
}
+
+extern int acpi_force;
+
+#ifdef __i386__
+
+static int __init disable_acpi_irq(struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
+ d->ident);
+ acpi_noirq_set();
+ }
+ return 0;
+}
+
+static int __init disable_acpi_pci(struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
+ d->ident);
+ acpi_disable_pci();
+ }
+ return 0;
+}
+
+static int __init dmi_disable_acpi(struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
+ disable_acpi();
+ } else {
+ printk(KERN_NOTICE
+ "Warning: DMI blacklist says broken, but acpi forced\n");
+ }
+ return 0;
+}
+
+/*
+ * Limit ACPI to CPU enumeration for HT
+ */
+static int __init force_acpi_ht(struct dmi_system_id *d)
+{
+ if (!acpi_force) {
+ printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
+ d->ident);
+ disable_acpi();
+ acpi_ht = 1;
+ } else {
+ printk(KERN_NOTICE
+ "Warning: acpi=force overrules DMI blacklist:
acpi=ht\n");
+ }
+ return 0;
+}
+
+/*
+ * If your system is blacklisted here, but you find that acpi=force
+ * works for you, please contact acpi-devel@xxxxxxxxxxxxxxx
+ */
+static struct dmi_system_id __initdata acpi_dmi_table[] = {
+ /*
+ * Boxes that need ACPI disabled
+ */
+ {
+ .callback = dmi_disable_acpi,
+ .ident = "IBM Thinkpad",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
+ },
+ },
+
+ /*
+ * Boxes that need acpi=ht
+ */
+ {
+ .callback = force_acpi_ht,
+ .ident = "FSC Primergy T850",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "DELL GX240",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "HP VISUALIZE NT Workstation",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "Compaq Workstation W8000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "ASUS P4B266",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "ASUS P2B-DS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "ASUS CUR-DLS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "ABIT i440BX-W83977",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
+ DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "IBM Bladecenter",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "IBM eServer xSeries 360",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "IBM eserver xSeries 330",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
+ },
+ },
+ {
+ .callback = force_acpi_ht,
+ .ident = "IBM eserver xSeries 440",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
+ },
+ },
+
+ /*
+ * Boxes that need ACPI PCI IRQ routing disabled
+ */
+ {
+ .callback = disable_acpi_irq,
+ .ident = "ASUS A7V",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
+ DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
+ /* newer BIOS, Revision 1011, does work */
+ DMI_MATCH(DMI_BIOS_VERSION,
+ "ASUS A7V ACPI BIOS Revision 1007"),
+ },
+ },
+
+ /*
+ * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
+ */
+ { /* _BBN 0 bug */
+ .callback = disable_acpi_pci,
+ .ident = "ASUS PR-DLS",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
+ DMI_MATCH(DMI_BIOS_VERSION,
+ "ASUS PR-DLS ACPI BIOS Revision 1010"),
+ DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
+ },
+ },
+ {
+ .callback = disable_acpi_pci,
+ .ident = "Acer TravelMate 36x Laptop",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
+ },
+ },
+ {}
+};
+
+#endif /* __i386__ */
/*
* acpi_boot_table_init() and acpi_boot_init()
@@ -844,17 +1083,20 @@
* !0: failure
*/
-int __init
-acpi_boot_table_init(void)
+int __init acpi_boot_table_init(void)
{
int error;
+
+#ifdef __i386__
+ dmi_check_system(acpi_dmi_table);
+#endif
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return 1;
/*
* Initialize the ACPI boot-time table parser.
@@ -864,7 +1106,6 @@
disable_acpi();
return error;
}
-
#ifdef __i386__
check_acpi_pci();
#endif
@@ -876,8 +1117,6 @@
*/
error = acpi_blacklisted();
if (error) {
- extern int acpi_force;
-
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
@@ -890,7 +1129,6 @@
return 0;
}
-
int __init acpi_boot_init(void)
{
/*
@@ -898,7 +1136,7 @@
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
- return 1;
+ return 1;
acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
@@ -913,8 +1151,6 @@
acpi_process_madt();
acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
- acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
-
- return 0;
-}
-
+
+ return 0;
+}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c Tue Jan 31 19:55:22 2006
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
@@ -26,6 +25,7 @@
#include <linux/mc146818rtc.h>
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
+#include <linux/cpu.h>
#include <asm/atomic.h>
#include <asm/smp.h>
@@ -34,10 +34,16 @@
#include <asm/desc.h>
#include <asm/arch_hooks.h>
#include <asm/hpet.h>
+#include <asm/i8253.h>
#include <mach_apic.h>
#include "io_ports.h"
+
+/*
+ * Knob to control our willingness to enable the local APIC.
+ */
+int enable_local_apic __initdata = 0; /* -1=force-disable, +1=force-enable */
/*
* Debug level
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/i386/kernel/apm.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/apm.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/apm.c Tue Jan 31 19:55:22 2006
@@ -228,10 +228,10 @@
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/desc.h>
+#include <asm/i8253.h>
#include "io_ports.h"
-extern spinlock_t i8253_lock;
extern unsigned long get_cmos_time(void);
extern void machine_real_restart(unsigned char *, int);
@@ -346,10 +346,10 @@
struct apm_user {
int magic;
struct apm_user * next;
- int suser: 1;
- int writer: 1;
- int reader: 1;
- int suspend_wait: 1;
+ unsigned int suser: 1;
+ unsigned int writer: 1;
+ unsigned int reader: 1;
+ unsigned int suspend_wait: 1;
int suspend_result;
int suspends_pending;
int standbys_pending;
@@ -911,14 +911,7 @@
0xcd, 0x15 /* int $0x15 */
};
- /*
- * This may be called on an SMP machine.
- */
-#ifdef CONFIG_SMP
/* Some bioses don't like being called from CPU != 0 */
- set_cpus_allowed(current, cpumask_of_cpu(0));
- BUG_ON(smp_processor_id() != 0);
-#endif
if (apm_info.realmode_power_off)
{
(void)apm_save_cpus();
@@ -1168,8 +1161,7 @@
static void reinit_timer(void)
{
#ifdef INIT_TIMER_AFTER_SUSPEND
- unsigned long flags;
- extern spinlock_t i8253_lock;
+ unsigned long flags;
spin_lock_irqsave(&i8253_lock, flags);
/* set the clock to 100 Hz */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c Tue Jan 31
19:55:22 2006
@@ -27,9 +27,9 @@
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
#endif
-static int cachesize_override __initdata = -1;
-static int disable_x86_fxsr __initdata = 0;
-static int disable_x86_serial_nr __initdata = 1;
+static int cachesize_override __devinitdata = -1;
+static int disable_x86_fxsr __devinitdata = 0;
+static int disable_x86_serial_nr __devinitdata = 1;
struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
@@ -64,7 +64,7 @@
}
__setup("cachesize=", cachesize_setup);
-int __init get_model_name(struct cpuinfo_x86 *c)
+int __devinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
char *p, *q;
@@ -94,7 +94,7 @@
}
-void __init display_cacheinfo(struct cpuinfo_x86 *c)
+void __devinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, ecx, edx, l2size;
@@ -135,7 +135,7 @@
/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
*/
/* Look up CPU names by table lookup. */
-static char __init *table_lookup_model(struct cpuinfo_x86 *c)
+static char __devinit *table_lookup_model(struct cpuinfo_x86 *c)
{
struct cpu_model_info *info;
@@ -156,7 +156,7 @@
}
-void __init get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+static void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
{
char *v = c->x86_vendor_id;
int i;
@@ -207,7 +207,7 @@
/* Probe for the CPUID instruction */
-static int __init have_cpuid_p(void)
+static int __devinit have_cpuid_p(void)
{
return flag_is_changeable_p(X86_EFLAGS_ID);
}
@@ -254,7 +254,7 @@
#endif
}
-void __init generic_identify(struct cpuinfo_x86 * c)
+void __devinit generic_identify(struct cpuinfo_x86 * c)
{
u32 tfms, xlvl;
int junk;
@@ -301,7 +301,7 @@
}
}
-static void __init squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
/* Disable processor serial number */
@@ -329,7 +329,7 @@
/*
* This does the hard work of actually picking apart the CPU stuff...
*/
-void __init identify_cpu(struct cpuinfo_x86 *c)
+void __devinit identify_cpu(struct cpuinfo_x86 *c)
{
int i;
@@ -439,10 +439,18 @@
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
+ if (c == &boot_cpu_data)
+ sysenter_setup();
+ enable_sep_cpu();
+
+ if (c == &boot_cpu_data)
+ mtrr_bp_init();
+ else
+ mtrr_ap_init();
}
#ifdef CONFIG_X86_HT
-void __init detect_ht(struct cpuinfo_x86 *c)
+void __devinit detect_ht(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
int index_msb, tmp;
@@ -497,7 +505,7 @@
}
#endif
-void __init print_cpu_info(struct cpuinfo_x86 *c)
+void __devinit print_cpu_info(struct cpuinfo_x86 *c)
{
char *vendor = NULL;
@@ -586,7 +594,7 @@
* and IDT. We reload them nevertheless, this function acts as a
* 'CPU state barrier', nothing should get across.
*/
-void __cpuinit cpu_init (void)
+void __cpuinit cpu_init(void)
{
int cpu = smp_processor_id();
struct tss_struct * t = &per_cpu(init_tss, cpu);
@@ -637,12 +645,12 @@
asm volatile ("xorl %eax, %eax; movl %eax, %fs; movl %eax, %gs");
/* Clear all 6 debug registers: */
-
-#define CD(register) HYPERVISOR_set_debugreg(register, 0)
-
- CD(0); CD(1); CD(2); CD(3); /* no db4 and db5 */; CD(6); CD(7);
-
-#undef CD
+ set_debugreg(0, 0);
+ set_debugreg(0, 1);
+ set_debugreg(0, 2);
+ set_debugreg(0, 3);
+ set_debugreg(0, 6);
+ set_debugreg(0, 7);
/*
* Force FPU initialization:
@@ -651,3 +659,15 @@
clear_used_math();
mxcsr_feature_mask_init();
}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void __devinit cpu_uninit(void)
+{
+ int cpu = raw_smp_processor_id();
+ cpu_clear(cpu, cpu_initialized);
+
+ /* lazy TLB state */
+ per_cpu(cpu_tlbstate, cpu).state = 0;
+ per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm;
+}
+#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c Tue Jan 31
19:55:22 2006
@@ -79,15 +79,25 @@
return op.u.add_memtype.reg;
}
+static int mtrr_check(unsigned long base, unsigned long size)
+{
+ if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
+ printk(KERN_WARNING
+ "mtrr: size and base must be multiples of 4 kiB\n");
+ printk(KERN_DEBUG
+ "mtrr: size: 0x%lx base: 0x%lx\n", size, base);
+ dump_stack();
+ return -1;
+ }
+ return 0;
+}
+
int
mtrr_add(unsigned long base, unsigned long size, unsigned int type,
char increment)
{
- if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
- printk(KERN_WARNING "mtrr: size and base must be multiples of 4
kiB\n");
- printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size,
base);
+ if (mtrr_check(base, size))
return -EINVAL;
- }
return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
increment);
}
@@ -139,16 +149,21 @@
int
mtrr_del(int reg, unsigned long base, unsigned long size)
{
- if ((base & (PAGE_SIZE - 1)) || (size & (PAGE_SIZE - 1))) {
- printk(KERN_INFO "mtrr: size and base must be multiples of 4
kiB\n");
- printk(KERN_DEBUG "mtrr: size: 0x%lx base: 0x%lx\n", size,
base);
+ if (mtrr_check(base, size))
return -EINVAL;
- }
return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
}
EXPORT_SYMBOL(mtrr_add);
EXPORT_SYMBOL(mtrr_del);
+
+void __init mtrr_bp_init(void)
+{
+}
+
+void mtrr_ap_init(void)
+{
+}
static int __init mtrr_init(void)
{
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S
--- a/linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S Tue Jan 31 19:55:22 2006
@@ -78,7 +78,7 @@
VM_MASK = 0x00020000
/* Pseudo-eflags. */
NMI_MASK = 0x80000000
-
+
/* Offsets into shared_info_t. */
#define evtchn_upcall_pending /* 0 */
#define evtchn_upcall_mask 1
@@ -254,7 +254,7 @@
GET_THREAD_INFO(%ebp)
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not
testb */
- testw
$(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ testw
$(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
@@ -277,9 +277,9 @@
pushl %eax # save orig_eax
SAVE_ALL
GET_THREAD_INFO(%ebp)
- # system call tracing in operation
+ # system call tracing in operation /
emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not
testb */
- testw
$(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),TI_flags(%ebp)
+ testw
$(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
cmpl $(nr_syscalls), %eax
jae syscall_badsys
@@ -388,7 +388,7 @@
# vm86-space
xorl %edx, %edx
call do_notify_resume
- jmp restore_all
+ jmp resume_userspace
ALIGN
work_notifysig_v86:
@@ -398,7 +398,7 @@
movl %eax, %esp
xorl %edx, %edx
call do_notify_resume
- jmp restore_all
+ jmp resume_userspace
# perform syscall exit tracing
ALIGN
@@ -407,6 +407,9 @@
movl %esp, %eax
xorl %edx,%edx
call do_syscall_trace
+ cmpl $0, %eax
+ jne resume_userspace # ret != 0 -> running under
PTRACE_SYSEMU,
+ # so must skip actual syscall
movl ORIG_EAX(%esp), %eax
cmpl $(nr_syscalls), %eax
jnae syscall_call
@@ -679,7 +682,7 @@
pushl $__KERNEL_CS; \
pushl $sysenter_past_esp
-ENTRY(debug)
+KPROBE_ENTRY(debug)
cmpl $sysenter_entry,(%esp)
jne debug_stack_correct
FIX_STACK(12, debug_stack_correct, debug_esp_fix_insn)
@@ -690,6 +693,7 @@
movl %esp,%eax # pt_regs pointer
call do_debug
jmp ret_from_exception
+ .previous .text
ENTRY(nmi)
pushl %eax
@@ -774,13 +778,14 @@
.previous
#endif /* XEN */
-ENTRY(int3)
+KPROBE_ENTRY(int3)
pushl $-1 # mark this as an int
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_int3
jmp ret_from_exception
+ .previous .text
ENTRY(overflow)
pushl $0
@@ -814,17 +819,19 @@
pushl $do_stack_segment
jmp error_code
-ENTRY(general_protection)
+KPROBE_ENTRY(general_protection)
pushl $do_general_protection
jmp error_code
+ .previous .text
ENTRY(alignment_check)
pushl $do_alignment_check
jmp error_code
-ENTRY(page_fault)
+KPROBE_ENTRY(page_fault)
pushl $do_page_fault
jmp error_code
+ .previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S
--- a/linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S Tue Jan 31 19:55:22 2006
@@ -22,7 +22,7 @@
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/thread_info.h>
-#include <asm/asm_offsets.h>
+#include <asm/asm-offsets.h>
#include <xen/interface/arch-x86_32.h>
/*
@@ -72,16 +72,15 @@
movb %cl,X86_MASK
movl %edx,X86_CAPABILITY
- incb ready
-
xorl %eax,%eax # Clear FS/GS and LDT
movl %eax,%fs
movl %eax,%gs
cld # gcc2 wants the direction flag cleared at all
times
#if 0
- movb ready, %cl
- cmpb $1,%cl
+ movb ready, %cl
+ movb $1, ready
+ cmpb $0,%cl
je 1f # the first CPU calls start_kernel
# all other CPUs call initialize_secondary
call initialize_secondary
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c Tue Jan 31
19:55:22 2006
@@ -21,7 +21,6 @@
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -31,12 +30,14 @@
#include <linux/mc146818rtc.h>
#include <linux/compiler.h>
#include <linux/acpi.h>
-
+#include <linux/module.h>
#include <linux/sysdev.h>
+
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/desc.h>
#include <asm/timer.h>
+#include <asm/i8259.h>
#include <mach_apic.h>
@@ -100,6 +101,8 @@
*/
int nr_ioapic_registers[MAX_IO_APICS];
+int disable_timer_pin_1 __initdata;
+
/*
* Rough estimation of how many shared IRQs there are, can
* be changed anytime.
@@ -118,7 +121,7 @@
int apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
-int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
#ifdef CONFIG_PCI_MSI
#define vector_to_irq(vector) \
(platform_legacy_irq(vector) ? vector : vector_irq[vector])
@@ -149,7 +152,9 @@
entry->pin = pin;
}
-#ifndef CONFIG_XEN
+#ifdef CONFIG_XEN
+#define clear_IO_APIC() ((void)0)
+#else
/*
* Reroute an IRQ to a different pin.
*/
@@ -264,13 +269,21 @@
clear_IO_APIC_pin(apic, pin);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask)
{
unsigned long flags;
int pin;
struct irq_pin_list *entry = irq_2_pin + irq;
unsigned int apicid_value;
+ cpumask_t tmp;
+ cpus_and(tmp, cpumask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(cpumask, tmp, CPU_MASK_ALL);
+
apicid_value = cpu_mask_to_apicid(cpumask);
/* Prepare to do the io_apic_write */
apicid_value = apicid_value << 24;
@@ -284,11 +297,9 @@
break;
entry = irq_2_pin + entry->next;
}
+ set_irq_info(irq, cpumask);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-#else
-#define clear_IO_APIC() ((void)0)
-#endif
#if defined(CONFIG_IRQBALANCE)
# include <asm/processor.h> /* kernel_thread() */
@@ -304,7 +315,6 @@
# define Dprintk(x...)
# endif
-cpumask_t __cacheline_aligned pending_irq_balance_cpumask[NR_IRQS];
#define IRQBALANCE_CHECK_ARCH -999
static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
@@ -373,12 +383,7 @@
cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
new_cpu = move(cpu, allowed_mask, now, 1);
if (cpu != new_cpu) {
- irq_desc_t *desc = irq_desc + irq;
- unsigned long flags;
-
- spin_lock_irqsave(&desc->lock, flags);
- pending_irq_balance_cpumask[irq] = cpumask_of_cpu(new_cpu);
- spin_unlock_irqrestore(&desc->lock, flags);
+ set_pending_irq(irq, cpumask_of_cpu(new_cpu));
}
}
@@ -573,16 +578,12 @@
cpus_and(tmp, target_cpu_mask, allowed_mask);
if (!cpus_empty(tmp)) {
- irq_desc_t *desc = irq_desc + selected_irq;
- unsigned long flags;
Dprintk("irq = %d moved to cpu = %d\n",
selected_irq, min_loaded);
/* mark for change destination */
- spin_lock_irqsave(&desc->lock, flags);
- pending_irq_balance_cpumask[selected_irq] =
- cpumask_of_cpu(min_loaded);
- spin_unlock_irqrestore(&desc->lock, flags);
+ set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded));
+
/* Since we made a change, come back sooner to
* check for more variation.
*/
@@ -613,13 +614,13 @@
/* push everything to CPU 0 to give us a starting point. */
for (i = 0 ; i < NR_IRQS ; i++) {
- pending_irq_balance_cpumask[i] = cpumask_of_cpu(0);
+ pending_irq_cpumask[i] = cpumask_of_cpu(0);
+ set_pending_irq(i, cpumask_of_cpu(0));
}
for ( ; ; ) {
- set_current_state(TASK_INTERRUPTIBLE);
- time_remaining = schedule_timeout(time_remaining);
- try_to_freeze(PF_FREEZE);
+ time_remaining = schedule_timeout_interruptible(time_remaining);
+ try_to_freeze();
if (time_after(jiffies,
prev_balance_time+balanced_irq_interval)) {
preempt_disable();
@@ -678,10 +679,8 @@
printk(KERN_ERR "balanced_irq_init: failed to spawn
balanced_irq");
failed:
for (i = 0; i < NR_CPUS; i++) {
- if(irq_cpu_data[i].irq_delta)
- kfree(irq_cpu_data[i].irq_delta);
- if(irq_cpu_data[i].last_irq)
- kfree(irq_cpu_data[i].last_irq);
+ kfree(irq_cpu_data[i].irq_delta);
+ kfree(irq_cpu_data[i].last_irq);
}
return 0;
}
@@ -694,20 +693,10 @@
__setup("noirqbalance", irqbalance_disable);
-static inline void move_irq(int irq)
-{
- /* note - we hold the desc->lock */
- if (unlikely(!cpus_empty(pending_irq_balance_cpumask[irq]))) {
- set_ioapic_affinity_irq(irq, pending_irq_balance_cpumask[irq]);
- cpus_clear(pending_irq_balance_cpumask[irq]);
- }
-}
-
late_initcall(balanced_irq_init);
-
-#else /* !CONFIG_IRQBALANCE */
-static inline void move_irq(int irq) { }
#endif /* CONFIG_IRQBALANCE */
+#endif /* CONFIG_SMP */
+#endif
#ifndef CONFIG_SMP
void fastcall send_IPI_self(int vector)
@@ -864,13 +853,15 @@
}
return best_guess;
}
-
-#ifndef CONFIG_XEN
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
/*
* This function currently is only a helper for the i386 smp boot process
where
* we need to reprogram the ioredtbls to cater for the cpus which have come
online
* so mask in all cases should simply be TARGET_CPUS
*/
+#ifdef CONFIG_SMP
+#ifndef CONFIG_XEN
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
@@ -890,6 +881,7 @@
}
}
#endif /* !CONFIG_XEN */
+#endif
/*
* EISA Edge/Level control register, ELCR
@@ -1179,7 +1171,7 @@
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS]; /* = { FIRST_DEVICE_VECTOR , 0 }; */
+u8 irq_vector[NR_IRQ_VECTORS] __read_mostly; /* = { FIRST_DEVICE_VECTOR , 0 };
*/
int assign_irq_vector(int irq)
{
@@ -1301,6 +1293,7 @@
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
@@ -1618,7 +1611,6 @@
void /*__init*/ print_PIC(void)
{
- extern spinlock_t i8259A_lock;
unsigned int v;
unsigned long flags;
@@ -1687,13 +1679,46 @@
*/
void disable_IO_APIC(void)
{
+#ifndef CONFIG_XEN
+ int pin;
+#endif
/*
* Clear the IO-APIC before rebooting:
*/
clear_IO_APIC();
#ifndef CONFIG_XEN
- disconnect_bsp_APIC();
+ /*
+ * If the i8259 is routed through an IOAPIC
+ * Put that IOAPIC in virtual wire mode
+ * so legacy interrupts can be delivered.
+ */
+ pin = find_isa_irq_pin(0, mp_ExtINT);
+ if (pin != -1) {
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 0; /* Enabled */
+ entry.trigger = 0; /* Edge */
+ entry.irr = 0;
+ entry.polarity = 0; /* High */
+ entry.delivery_status = 0;
+ entry.dest_mode = 0; /* Physical */
+ entry.delivery_mode = 7; /* ExtInt */
+ entry.vector = 0;
+ entry.dest.physical.physical_dest = 0;
+
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+ disconnect_bsp_APIC(pin != -1);
#endif
}
@@ -1715,6 +1740,12 @@
unsigned long flags;
/*
+ * Don't check I/O APIC IDs for xAPIC systems. They have
+ * no meaning without the serial APIC bus.
+ */
+ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86
< 15))
+ return;
+ /*
* This is broken; anything with a real cpu count has to
* circumvent this idiocy regardless.
*/
@@ -1740,10 +1771,6 @@
mp_ioapics[apic].mpc_apicid = reg_00.bits.ID;
}
- /* Don't check I/O APIC IDs for some xAPIC systems. They have
- * no meaning without the serial APIC bus. */
- if (NO_IOAPIC_CHECK)
- continue;
/*
* Sanity check, is the ID really free? Every APIC in a
* system must have a unique ID or we get lots of nice
@@ -1967,6 +1994,7 @@
{
int irq = vector_to_irq(vector);
+ move_irq(vector);
ack_edge_ioapic_irq(irq);
}
@@ -1981,6 +2009,7 @@
{
int irq = vector_to_irq(vector);
+ move_irq(vector);
end_level_ioapic_irq(irq);
}
@@ -1998,13 +2027,16 @@
unmask_IO_APIC_irq(irq);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_vector (unsigned int vector,
cpumask_t cpu_mask)
{
int irq = vector_to_irq(vector);
+ set_native_irq_info(vector, cpu_mask);
set_ioapic_affinity_irq(irq, cpu_mask);
}
+#endif
#endif
/*
@@ -2015,7 +2047,7 @@
* edge-triggered handler, without risking IRQ storms and other ugly
* races.
*/
-static struct hw_interrupt_type ioapic_edge_type = {
+static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
.typename = "IO-APIC-edge",
.startup = startup_edge_ioapic,
.shutdown = shutdown_edge_ioapic,
@@ -2023,10 +2055,12 @@
.disable = disable_edge_ioapic,
.ack = ack_edge_ioapic,
.end = end_edge_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
-static struct hw_interrupt_type ioapic_level_type = {
+static struct hw_interrupt_type ioapic_level_type __read_mostly = {
.typename = "IO-APIC-level",
.startup = startup_level_ioapic,
.shutdown = shutdown_level_ioapic,
@@ -2034,7 +2068,9 @@
.disable = disable_level_ioapic,
.ack = mask_and_ack_level_ioapic,
.end = end_level_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
#endif /* !CONFIG_XEN */
@@ -2101,7 +2137,7 @@
static void end_lapic_irq (unsigned int i) { /* nothing */ }
-static struct hw_interrupt_type lapic_irq_type = {
+static struct hw_interrupt_type lapic_irq_type __read_mostly = {
.typename = "local-APIC-edge",
.startup = NULL, /* startup_irq() not used for IRQ0 */
.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
@@ -2237,6 +2273,8 @@
setup_nmi();
enable_8259A_irq(0);
}
+ if (disable_timer_pin_1 > 0)
+ clear_IO_APIC_pin(0, pin1);
return;
}
clear_IO_APIC_pin(0, pin1);
@@ -2453,7 +2491,7 @@
ACPI-based IOAPIC Configuration
--------------------------------------------------------------------------
*/
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
int __init io_apic_get_unique_id (int ioapic, int apic_id)
{
@@ -2603,9 +2641,10 @@
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
}
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c Tue Jan 31
19:55:22 2006
@@ -101,25 +101,21 @@
* code.
*/
-asmlinkage long sys_iopl(unsigned int new_io_pl)
+asmlinkage long sys_iopl(unsigned long unused)
{
- unsigned int old_io_pl = current->thread.io_pl;
- physdev_op_t op;
+ volatile struct pt_regs * regs = (struct pt_regs *) &unused;
+ unsigned int level = regs->ebx;
+ struct thread_struct *t = ¤t->thread;
+ unsigned int old = (t->iopl >> 12) & 3;
- if (new_io_pl > 3)
+ if (level > 3)
return -EINVAL;
-
- /* Need "raw I/O" privileges for direct port access. */
- if ((new_io_pl > old_io_pl) && !capable(CAP_SYS_RAWIO))
- return -EPERM;
-
- /* Change our version of the privilege levels. */
- current->thread.io_pl = new_io_pl;
-
- /* Force the change at ring 0. */
- op.cmd = PHYSDEVOP_SET_IOPL;
- op.u.set_iopl.iopl = (new_io_pl == 0) ? 1 : new_io_pl;
- HYPERVISOR_physdev_op(&op);
-
+ /* Trying to gain more privileges? */
+ if (level > old) {
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ }
+ t->iopl = level << 12;
+ set_iopl_mask(t->iopl);
return 0;
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c Tue Jan 31 19:55:22 2006
@@ -154,6 +154,11 @@
printk("CPU %u irqstacks, hard=%p soft=%p\n",
cpu,hardirq_ctx[cpu],softirq_ctx[cpu]);
+}
+
+void irq_ctx_exit(int cpu)
+{
+ hardirq_ctx[cpu] = NULL;
}
extern asmlinkage void __do_softirq(void);
@@ -242,12 +247,13 @@
} else if (i == NR_IRQS) {
seq_printf(p, "NMI: ");
for_each_cpu(j)
- seq_printf(p, "%10u ", nmi_count(j));
+ seq_printf(p, "%10u ", nmi_count(j));
seq_putc(p, '\n');
#ifdef CONFIG_X86_LOCAL_APIC
seq_printf(p, "LOC: ");
for_each_cpu(j)
- seq_printf(p, "%10u ",
per_cpu(irq_stat,j).apic_timer_irqs);
+ seq_printf(p, "%10u ",
+ per_cpu(irq_stat,j).apic_timer_irqs);
seq_putc(p, '\n');
#endif
seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c Tue Jan 31
19:55:22 2006
@@ -14,7 +14,6 @@
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/delay.h>
@@ -65,9 +64,10 @@
int pic_mode;
unsigned long mp_lapic_addr;
+unsigned int def_to_bigsmp = 0;
+
/* Processor that is doing the boot up */
unsigned int boot_cpu_physical_apicid = -1U;
-unsigned int boot_cpu_logical_apicid = -1U;
/* Internal processor count */
static unsigned int __initdata num_processors;
@@ -123,7 +123,7 @@
static void __init MP_processor_info (struct mpc_config_processor *m)
{
int ver, apicid;
- physid_mask_t tmp;
+ physid_mask_t phys_cpu;
if (!(m->mpc_cpuflag & CPU_ENABLED))
return;
@@ -181,7 +181,6 @@
if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
Dprintk(" Bootup CPU\n");
boot_cpu_physical_apicid = m->mpc_apicid;
- boot_cpu_logical_apicid = apicid;
}
if (num_processors >= NR_CPUS) {
@@ -195,27 +194,36 @@
" Processor ignored.\n", maxcpus);
return;
}
- num_processors++;
ver = m->mpc_apicver;
if (!MP_valid_apicid(apicid, ver)) {
printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
m->mpc_apicid, MAX_APICS);
- --num_processors;
- return;
- }
-
- tmp = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, tmp);
-
+ return;
+ }
+
+ cpu_set(num_processors, cpu_possible_map);
+ num_processors++;
+ phys_cpu = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
/*
* Validate version
*/
if (ver == 0x0) {
- printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d!
fixing up to 0x10. (tell your hw vendor)\n", m->mpc_apicid);
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ m->mpc_apicid);
ver = 0x10;
}
apic_version[m->mpc_apicid] = ver;
+ if ((num_processors > 8) &&
+ APIC_XAPIC(ver) &&
+ (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL))
+ def_to_bigsmp = 1;
+ else
+ def_to_bigsmp = 0;
+
bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
}
#else
@@ -662,8 +670,6 @@
struct intel_mp_floating *mpf = mpf_found;
/*
- * ACPI may be used to obtain the entire SMP configuration or just to
- * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that
* ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
@@ -828,7 +834,7 @@
ACPI-based MP Configuration
--------------------------------------------------------------------------
*/
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
void __init mp_register_lapic_address (
u64 address)
@@ -876,7 +882,7 @@
MP_processor_info(&processor);
}
-#if defined(CONFIG_X86_IO_APIC) && (defined(CONFIG_ACPI_INTERPRETER) ||
defined(CONFIG_ACPI_BOOT))
+#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS 0
#define MP_MAX_IOAPIC_PIN 127
@@ -931,7 +937,10 @@
mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
mp_ioapics[idx].mpc_apicaddr = address;
- mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 < 15))
+ mp_ioapics[idx].mpc_apicid = io_apic_get_unique_id(idx, id);
+ else
+ mp_ioapics[idx].mpc_apicid = id;
mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
/*
@@ -1072,17 +1081,24 @@
}
}
+#define MAX_GSI_NUM 4096
+
int mp_register_gsi (u32 gsi, int edge_level, int active_high_low)
{
int ioapic = -1;
int ioapic_pin = 0;
int idx, bit = 0;
-
-#ifdef CONFIG_ACPI_BUS
+ static int pci_irq = 16;
+ /*
+ * Mapping between Global System Interrups, which
+ * represent all possible interrupts, and IRQs
+ * assigned to actual devices.
+ */
+ static int gsi_to_irq[MAX_GSI_NUM];
+
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
return gsi;
-#endif
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
@@ -1111,10 +1127,31 @@
if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
+ return gsi_to_irq[gsi];
}
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+
+ if (edge_level) {
+ /*
+ * For PCI devices assign IRQs in order, avoiding gaps
+ * due to unused I/O APIC pins.
+ */
+ int irq = gsi;
+ if (gsi < MAX_GSI_NUM) {
+ if (gsi > 15)
+ gsi = pci_irq++;
+ /*
+ * Don't assign IRQ used by ACPI SCI
+ */
+ if (gsi == acpi_fadt.sci_int)
+ gsi = pci_irq++;
+ gsi_to_irq[irq] = gsi;
+ } else {
+ printk(KERN_ERR "GSI %u is too high\n", gsi);
+ return gsi;
+ }
+ }
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
@@ -1122,5 +1159,5 @@
return gsi;
}
-#endif /*CONFIG_X86_IO_APIC && (CONFIG_ACPI_INTERPRETER || CONFIG_ACPI_BOOT)*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c Tue Jan 31
19:55:22 2006
@@ -11,6 +11,7 @@
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
+#include <linux/module.h>
#include <linux/version.h>
#include <asm/io.h>
#include <xen/balloon.h>
@@ -124,7 +125,7 @@
EXPORT_SYMBOL(dma_supported);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, unsigned int __nocast gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/process-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/process-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/process-xen.c Tue Jan 31
19:55:22 2006
@@ -38,6 +38,7 @@
#include <linux/kallsyms.h>
#include <linux/ptrace.h>
#include <linux/random.h>
+#include <linux/kprobes.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -46,7 +47,6 @@
#include <asm/ldt.h>
#include <asm/processor.h>
#include <asm/i387.h>
-#include <asm/irq.h>
#include <asm/desc.h>
#include <xen/interface/physdev.h>
#include <xen/interface/vcpu.h>
@@ -54,12 +54,14 @@
#include <asm/math_emu.h>
#endif
-#include <linux/irq.h>
#include <linux/err.h>
#include <asm/tlbflush.h>
#include <asm/cpu.h>
+#include <asm/tlbflush.h>
+#include <asm/cpu.h>
+
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
static int hlt_counter;
@@ -79,6 +81,7 @@
* Powermanagement idle function, if any..
*/
void (*pm_idle)(void);
+EXPORT_SYMBOL(pm_idle);
static DEFINE_PER_CPU(unsigned int, cpu_idle_state);
void disable_hlt(void)
@@ -111,6 +114,9 @@
start_hz_timer();
}
}
+#ifdef CONFIG_APM_MODULE
+EXPORT_SYMBOL(default_idle);
+#endif
/*
* The idle thread. There's no useful work to be
@@ -118,10 +124,10 @@
* low exit latency (ie sit in a loop waiting for
* somebody to say that they'd like to reschedule)
*/
-void cpu_idle (void)
+void cpu_idle(void)
{
#if defined(CONFIG_HOTPLUG_CPU)
- int cpu = _smp_processor_id();
+ int cpu = raw_smp_processor_id();
#endif
/* endless idle loop with no priority at all */
@@ -130,6 +136,7 @@
if (__get_cpu_var(cpu_idle_state))
__get_cpu_var(cpu_idle_state) = 0;
+
rmb();
#if defined(CONFIG_HOTPLUG_CPU)
@@ -176,7 +183,7 @@
/* XXX XEN doesn't use mwait_idle(), select_idle_routine(), idle_setup(). */
/* Always use xen_idle() instead. */
-void __init select_idle_routine(const struct cpuinfo_x86 *c) {}
+void __devinit select_idle_routine(const struct cpuinfo_x86 *c) {}
void show_regs(struct pt_regs * regs)
{
@@ -185,7 +192,7 @@
printk("EIP: %04x:[<%08lx>] CPU: %d\n",0xffff & regs->xcs,regs->eip,
smp_processor_id());
print_symbol("EIP is at %s\n", regs->eip);
- if (regs->xcs & 2)
+ if (user_mode(regs))
printk(" ESP: %04x:%08lx",0xffff & regs->xss,regs->esp);
printk(" EFLAGS: %08lx %s (%s)\n",
regs->eflags, print_tainted(), system_utsname.release);
@@ -237,6 +244,7 @@
/* Ok, create the new process.. */
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL,
NULL);
}
+EXPORT_SYMBOL(kernel_thread);
/*
* Free current thread data structures etc..
@@ -245,6 +253,13 @@
{
struct task_struct *tsk = current;
struct thread_struct *t = &tsk->thread;
+
+ /*
+ * Remove function-return probe instances associated with this task
+ * and put them back on the free list. Do not insert an exit probe for
+ * this function, it will be disabled by kprobe_flush_task if you do.
+ */
+ kprobe_flush_task(tsk);
/* The process may have allocated an io port bitmap... nuke it. */
if (unlikely(NULL != t->io_bitmap_ptr)) {
@@ -259,6 +274,13 @@
void flush_thread(void)
{
struct task_struct *tsk = current;
+
+ /*
+ * Remove function-return probe instances associated with this task
+ * and put them back on the free list. Do not insert an exit probe for
+ * this function, it will be disabled by kprobe_flush_task if you do.
+ */
+ kprobe_flush_task(tsk);
memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));
@@ -361,7 +383,7 @@
desc->b = LDT_entry_b(&info);
}
- p->thread.io_pl = current->thread.io_pl;
+ p->thread.iopl = current->thread.iopl;
err = 0;
out:
@@ -413,6 +435,7 @@
dump->u_fpvalid = dump_fpu (regs, &dump->i387);
}
+EXPORT_SYMBOL(dump_thread);
/*
* Capture the user space registers if the task is not running (in user space)
@@ -432,6 +455,33 @@
boot_option_idle_override = 1;
return 1;
+}
+
+/*
+ * This function selects if the context switch from prev to next
+ * has to tweak the TSC disable bit in the cr4.
+ */
+static inline void disable_tsc(struct task_struct *prev_p,
+ struct task_struct *next_p)
+{
+ struct thread_info *prev, *next;
+
+ /*
+ * gcc should eliminate the ->thread_info dereference if
+ * has_secure_computing returns 0 at compile time (SECCOMP=n).
+ */
+ prev = prev_p->thread_info;
+ next = next_p->thread_info;
+
+ if (has_secure_computing(prev) || has_secure_computing(next)) {
+ /* slow path here */
+ if (has_secure_computing(prev) &&
+ !has_secure_computing(next)) {
+ write_cr4(read_cr4() & ~X86_CR4_TSD);
+ } else if (!has_secure_computing(prev) &&
+ has_secure_computing(next))
+ write_cr4(read_cr4() | X86_CR4_TSD);
+ }
}
/*
@@ -488,7 +538,7 @@
#endif
/*
- * Reload esp0, LDT and the page table pointer:
+ * Reload esp0.
* This is load_esp0(tss, next) with a multicall.
*/
tss->esp0 = next->esp0;
@@ -514,9 +564,10 @@
C(0); C(1); C(2);
#undef C
- if (unlikely(prev->io_pl != next->io_pl)) {
+ if (unlikely(prev->iopl != next->iopl)) {
iopl_op.cmd = PHYSDEVOP_SET_IOPL;
- iopl_op.u.set_iopl.iopl = (next->io_pl == 0) ? 1 : next->io_pl;
+ iopl_op.u.set_iopl.iopl = (next->iopl == 0) ? 1 :
+ (next->iopl >> 12) & 3;
mcl->op = __HYPERVISOR_physdev_op;
mcl->args[0] = (unsigned long)&iopl_op;
mcl++;
@@ -538,24 +589,30 @@
/*
* Restore %fs and %gs if needed.
- */
- if (unlikely(next->fs | next->gs)) {
+ *
+ * Glibc normally makes %fs be zero, and %gs is one of
+ * the TLS segments.
+ */
+ if (unlikely(next->fs))
loadsegment(fs, next->fs);
+
+ if (next->gs)
loadsegment(gs, next->gs);
- }
/*
* Now maybe reload the debug registers
*/
if (unlikely(next->debugreg[7])) {
- loaddebug(next, 0);
- loaddebug(next, 1);
- loaddebug(next, 2);
- loaddebug(next, 3);
+ set_debugreg(next->debugreg[0], 0);
+ set_debugreg(next->debugreg[1], 1);
+ set_debugreg(next->debugreg[2], 2);
+ set_debugreg(next->debugreg[3], 3);
/* no 4 and 5 */
- loaddebug(next, 6);
- loaddebug(next, 7);
- }
+ set_debugreg(next->debugreg[6], 6);
+ set_debugreg(next->debugreg[7], 7);
+ }
+
+ disable_tsc(prev_p, next_p);
return prev_p;
}
@@ -649,6 +706,7 @@
} while (count++ < 16);
return 0;
}
+EXPORT_SYMBOL(get_wchan);
/*
* sys_alloc_thread_area: get a yet unused TLS descriptor index.
@@ -745,6 +803,8 @@
if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
return -EINVAL;
+ memset(&info, 0, sizeof(info));
+
desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
info.entry_number = idx;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/setup-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/setup-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/setup-xen.c Tue Jan 31 19:55:22 2006
@@ -23,8 +23,10 @@
* This file handles the architecture-dependent parts of initialization
*/
+#include <linux/config.h>
#include <linux/sched.h>
#include <linux/mm.h>
+#include <linux/mmzone.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/acpi.h>
@@ -44,7 +46,12 @@
#include <linux/kernel.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
+#include <linux/kexec.h>
+#include <linux/crash_dump.h>
+
#include <video/edid.h>
+
+#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/mpspec.h>
#include <asm/setup.h>
@@ -60,6 +67,9 @@
#include "setup_arch_pre.h"
#include <bios_ebda.h>
+/* Forward Declaration. */
+void __init find_max_pfn(void);
+
/* Allows setting of maximum possible memory size */
static unsigned long xen_override_max_pfn;
@@ -71,7 +81,7 @@
extern char hypercall_page[PAGE_SIZE];
EXPORT_SYMBOL(hypercall_page);
-int disable_pse __initdata = 0;
+int disable_pse __devinitdata = 0;
/*
* Machine setup..
@@ -85,30 +95,37 @@
/* cpu data as detected by the assembly code in head.S */
struct cpuinfo_x86 new_cpu_data __initdata = { 0, 0, 0, 0, -1, 0, 1, 0, -1 };
/* common cpu data for all cpus */
-struct cpuinfo_x86 boot_cpu_data = { 0, 0, 0, 0, -1, 0, 1, 0, -1 };
+struct cpuinfo_x86 boot_cpu_data __read_mostly = { 0, 0, 0, 0, -1, 0, 1, 0, -1
};
+EXPORT_SYMBOL(boot_cpu_data);
unsigned long mmu_cr4_features;
-#ifdef CONFIG_ACPI_INTERPRETER
+#ifdef CONFIG_ACPI
int acpi_disabled = 0;
#else
int acpi_disabled = 1;
#endif
EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
int __initdata acpi_force = 0;
extern acpi_interrupt_flags acpi_sci_flags;
#endif
/* for MCA, but anyone else can use it if they want */
unsigned int machine_id;
+#ifdef CONFIG_MCA
+EXPORT_SYMBOL(machine_id);
+#endif
unsigned int machine_submodel_id;
unsigned int BIOS_revision;
unsigned int mca_pentium_flag;
/* For PCI or other memory-mapped resources */
unsigned long pci_mem_start = 0x10000000;
+#ifdef CONFIG_PCI
+EXPORT_SYMBOL(pci_mem_start);
+#endif
/* Boot loader ID as an integer, for the benefit of proc_dointvec */
int bootloader_type;
@@ -120,14 +137,27 @@
* Setup options
*/
struct drive_info_struct { char dummy[32]; } drive_info;
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \
+ defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
+EXPORT_SYMBOL(drive_info);
+#endif
struct screen_info screen_info;
+#ifdef CONFIG_VT
+EXPORT_SYMBOL(screen_info);
+#endif
struct apm_info apm_info;
+EXPORT_SYMBOL(apm_info);
struct sys_desc_table_struct {
unsigned short length;
unsigned char table[0];
};
struct edid_info edid_info;
+EXPORT_SYMBOL_GPL(edid_info);
struct ist_info ist_info;
+#if defined(CONFIG_X86_SPEEDSTEP_SMI) || \
+ defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
+EXPORT_SYMBOL(ist_info);
+#endif
struct e820map e820;
extern void early_cpu_init(void);
@@ -377,12 +407,16 @@
int i;
if (efi_enabled) {
- for (i = 0; i < memmap.nr_map; i++) {
- current_addr = memmap.map[i].phys_addr +
- (memmap.map[i].num_pages << 12);
- if (memmap.map[i].type == EFI_CONVENTIONAL_MEMORY) {
+ efi_memory_desc_t *md;
+ void *p;
+
+ for (p = memmap.map, i = 0; p < memmap.map_end;
+ p += memmap.desc_size, i++) {
+ md = p;
+ current_addr = md->phys_addr + (md->num_pages << 12);
+ if (md->type == EFI_CONVENTIONAL_MEMORY) {
if (current_addr >= size) {
- memmap.map[i].num_pages -=
+ md->num_pages -=
(((current_addr-size) +
PAGE_SIZE-1) >> PAGE_SHIFT);
memmap.nr_map = i + 1;
return;
@@ -757,6 +791,15 @@
if (to != command_line)
to--;
if (!memcmp(from+7, "exactmap", 8)) {
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we
+ * still need to know the real mem
+ * size before original memory map is
+ * reset.
+ */
+ find_max_pfn();
+ saved_max_pfn = max_pfn;
+#endif
from += 8+7;
e820.nr_map = 0;
userdef = 1;
@@ -802,7 +845,7 @@
}
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/* "acpi=off" disables both ACPI table parsing and interpreter
*/
else if (!memcmp(from, "acpi=off", 8)) {
disable_acpi();
@@ -851,14 +894,55 @@
#ifdef CONFIG_X86_IO_APIC
else if (!memcmp(from, "acpi_skip_timer_override", 24))
acpi_skip_timer_override = 1;
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
+
+ if (!memcmp(from, "disable_timer_pin_1", 19))
+ disable_timer_pin_1 = 1;
+ if (!memcmp(from, "enable_timer_pin_1", 18))
+ disable_timer_pin_1 = -1;
+
/* disable IO-APIC */
else if (!memcmp(from, "noapic", 6))
disable_ioapic_setup();
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* enable local APIC */
+ else if (!memcmp(from, "lapic", 5))
+ lapic_enable();
+
+ /* disable local APIC */
+ else if (!memcmp(from, "nolapic", 6))
+ lapic_disable();
#endif /* CONFIG_X86_LOCAL_APIC */
-#endif /* CONFIG_ACPI_BOOT */
+
+#ifdef CONFIG_KEXEC
+ /* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never set's it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+ else if (!memcmp(from, "crashkernel=", 12)) {
+ unsigned long size, base;
+ size = memparse(from+12, &from);
+ if (*from == '@') {
+ base = memparse(from+1, &from);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ }
+#endif
+#ifdef CONFIG_CRASH_DUMP
+ /* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+ else if (!memcmp(from, "elfcorehdr=", 11))
+ elfcorehdr_addr = memparse(from+11, &from);
+#endif
/*
* highmem=size forces highmem to be exactly 'size' bytes.
@@ -1086,7 +1170,7 @@
}
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init setup_bootmem_allocator(void);
static unsigned long __init setup_memory(void)
{
@@ -1144,9 +1228,9 @@
free_area_init(zones_size);
}
#else
-extern unsigned long setup_memory(void);
+extern unsigned long __init setup_memory(void);
extern void zone_sizes_init(void);
-#endif /* !CONFIG_DISCONTIGMEM */
+#endif /* !CONFIG_NEED_MULTIPLE_NODES */
void __init setup_bootmem_allocator(void)
{
@@ -1164,8 +1248,8 @@
* the (very unlikely) case of us accidentally initializing the
* bootmem allocator with an invalid RAM area.
*/
- reserve_bootmem(HIGH_MEMORY, (PFN_PHYS(min_low_pfn) +
- bootmap_size + PAGE_SIZE-1) - (HIGH_MEMORY));
+ reserve_bootmem(__PHYSICAL_START, (PFN_PHYS(min_low_pfn) +
+ bootmap_size + PAGE_SIZE-1) - (__PHYSICAL_START));
#ifndef CONFIG_XEN
/*
@@ -1328,8 +1412,16 @@
*/
request_resource(res, code_resource);
request_resource(res, data_resource);
- }
- }
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
+ }
+ }
+#endif
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end)
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1);
#endif
}
@@ -1339,7 +1431,7 @@
static void __init register_memory(void)
{
#ifndef CONFIG_XEN
- unsigned long gapstart, gapsize;
+ unsigned long gapstart, gapsize, round;
unsigned long long last;
#endif
int i;
@@ -1390,14 +1482,14 @@
}
/*
- * Start allocating dynamic PCI memory a bit into the gap,
- * aligned up to the nearest megabyte.
- *
- * Question: should we try to pad it up a bit (do something
- * like " + (gapsize >> 3)" in there too?). We now have the
- * technology.
+ * See how much we want to round up: start off with
+ * rounding to the next 1MB area.
*/
- pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
+ round = 0x100000;
+ while ((gapsize >> 4) > round)
+ round += round;
+ /* Fun with two's complement */
+ pci_mem_start = (gapstart + round) & -round;
printk("Allocating PCI resources starting at %08lx (gap:
%08lx:%08lx)\n",
pci_mem_start, gapstart, gapsize);
@@ -1465,7 +1557,7 @@
This runs before SMP is initialized to avoid SMP problems with
self modifying code. This implies that assymetric systems where
APs have less capabilities than the boot processor are not handled.
- In this case boot with "noreplacement". */
+ Tough. Make sure you disable such features by hand. */
void apply_alternatives(void *start, void *end)
{
struct alt_instr *a;
@@ -1493,23 +1585,11 @@
}
}
-static int no_replacement __initdata = 0;
-
void __init alternative_instructions(void)
{
extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
- if (no_replacement)
- return;
apply_alternatives(__alt_instructions, __alt_instructions_end);
}
-
-static int __init noreplacement_setup(char *s)
-{
- no_replacement = 1;
- return 0;
-}
-
-__setup("noreplacement", noreplacement_setup);
static char * __init machine_specific_memory_setup(void);
@@ -1581,13 +1661,19 @@
bootloader_type = LOADER_TYPE;
#ifdef CONFIG_XEN_PHYSDEV_ACCESS
- /* This is drawn from a dump from vgacon:startup in standard Linux. */
- screen_info.orig_video_mode = 3;
- screen_info.orig_video_isVGA = 1;
- screen_info.orig_video_lines = 25;
- screen_info.orig_video_cols = 80;
- screen_info.orig_video_ega_bx = 3;
- screen_info.orig_video_points = 16;
+ if (xen_start_info->flags & SIF_INITDOMAIN) {
+ /* This is drawn from a dump from vgacon:startup in
+ * standard Linux. */
+ screen_info.orig_video_mode = 3;
+ screen_info.orig_video_isVGA = 1;
+ screen_info.orig_video_lines = 25;
+ screen_info.orig_video_cols = 80;
+ screen_info.orig_video_ega_bx = 3;
+ screen_info.orig_video_points = 16;
+ } else
+ screen_info.orig_video_isVGA = 0;
+#else
+ screen_info.orig_video_isVGA = 0;
#endif
#ifdef CONFIG_BLK_DEV_RAM
@@ -1641,6 +1727,7 @@
#endif
paging_init();
remapped_pgdat_init();
+ sparse_init();
zone_sizes_init();
#ifdef CONFIG_X86_FIND_SMP_CONFIG
@@ -1717,22 +1804,26 @@
op.u.set_iopl.iopl = 1;
HYPERVISOR_physdev_op(&op);
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
acpi_disabled = 1;
acpi_ht = 0;
}
-#endif
-
-#ifdef CONFIG_ACPI_BOOT
+
/*
* Parse the ACPI tables for possible boot-time SMP configuration.
*/
acpi_boot_table_init();
acpi_boot_init();
-#endif
-
+
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_PC)
+ if (def_to_bigsmp)
+ printk(KERN_WARNING "More than 8 CPUs detected and "
+ "CONFIG_X86_PC cannot handle it.\nUse "
+ "CONFIG_X86_GENERICARCH or CONFIG_X86_BIGSMP.\n");
+#endif
+#endif
#ifdef CONFIG_X86_LOCAL_APIC
if (smp_found_config)
get_smp_config();
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/smp-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/smp-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/smp-xen.c Tue Jan 31 19:55:22 2006
@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
@@ -20,6 +19,7 @@
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
+#include <linux/module.h>
#include <asm/mtrr.h>
#include <asm/tlbflush.h>
@@ -415,6 +415,7 @@
preempt_enable();
}
+EXPORT_SYMBOL(flush_tlb_page);
static void do_flush_tlb_all(void* info)
{
@@ -471,6 +472,16 @@
int wait;
};
+void lock_ipi_call_lock(void)
+{
+ spin_lock_irq(&call_lock);
+}
+
+void unlock_ipi_call_lock(void)
+{
+ spin_unlock_irq(&call_lock);
+}
+
static struct call_data_struct * call_data;
/*
@@ -498,8 +509,7 @@
/* Holding any lock stops cpus from going down. */
spin_lock(&call_lock);
- cpus = num_online_cpus()-1;
-
+ cpus = num_online_cpus() - 1;
if (!cpus) {
spin_unlock(&call_lock);
return 0;
@@ -532,6 +542,7 @@
return 0;
}
+EXPORT_SYMBOL(smp_call_function);
static void stop_this_cpu (void * dummy)
{
@@ -544,7 +555,7 @@
disable_local_APIC();
#endif
if (cpu_data[smp_processor_id()].hlt_works_ok)
- for(;;) __asm__("hlt");
+ for(;;) halt();
for (;;);
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/smpboot.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/smpboot.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/smpboot.c Tue Jan 31 19:55:22 2006
@@ -42,8 +42,10 @@
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/smp_lock.h>
-#include <linux/irq.h>
#include <linux/bootmem.h>
+#include <linux/notifier.h>
+#include <linux/cpu.h>
+#include <linux/percpu.h>
#include <linux/delay.h>
#include <linux/mc146818rtc.h>
@@ -56,26 +58,50 @@
#include <smpboot_hooks.h>
/* Set if we find a B stepping CPU */
-static int __initdata smp_b_stepping;
+static int __devinitdata smp_b_stepping;
/* Number of siblings per CPU package */
int smp_num_siblings = 1;
-int phys_proc_id[NR_CPUS]; /* Package ID of each logical CPU */
+#ifdef CONFIG_X86_HT
+EXPORT_SYMBOL(smp_num_siblings);
+#endif
+
+/* Package ID of each logical CPU */
+int phys_proc_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
EXPORT_SYMBOL(phys_proc_id);
-int cpu_core_id[NR_CPUS]; /* Core ID of each logical CPU */
+
+/* Core ID of each logical CPU */
+int cpu_core_id[NR_CPUS] __read_mostly = {[0 ... NR_CPUS-1] = BAD_APICID};
EXPORT_SYMBOL(cpu_core_id);
+cpumask_t cpu_sibling_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_sibling_map);
+
+cpumask_t cpu_core_map[NR_CPUS] __read_mostly;
+EXPORT_SYMBOL(cpu_core_map);
+
/* bitmap of online cpus */
-cpumask_t cpu_online_map;
+cpumask_t cpu_online_map __read_mostly;
+EXPORT_SYMBOL(cpu_online_map);
cpumask_t cpu_callin_map;
cpumask_t cpu_callout_map;
+EXPORT_SYMBOL(cpu_callout_map);
+cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
static cpumask_t smp_commenced_mask;
+
+/* TSC's upper 32 bits can't be written in eariler CPU (before prescott), there
+ * is no way to resync one AP against BP. TBD: for prescott and above, we
+ * should use IA64's algorithm
+ */
+static int __devinitdata tsc_sync_disabled;
/* Per CPU bogomips and other parameters */
struct cpuinfo_x86 cpu_data[NR_CPUS] __cacheline_aligned;
-
-u8 x86_cpu_to_apicid[NR_CPUS] =
+EXPORT_SYMBOL(cpu_data);
+
+u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly =
{ [0 ... NR_CPUS-1] = 0xff };
EXPORT_SYMBOL(x86_cpu_to_apicid);
@@ -89,6 +115,9 @@
static int trampoline_exec;
static void map_cpu_to_logical_apicid(void);
+
+/* State of each CPU. */
+DEFINE_PER_CPU(int, cpu_state) = { 0 };
/*
* Currently trivial. Write the real->protected mode
@@ -96,7 +125,7 @@
* has made sure it's suitably aligned.
*/
-static unsigned long __init setup_trampoline(void)
+static unsigned long __devinit setup_trampoline(void)
{
memcpy(trampoline_base, trampoline_data, trampoline_end -
trampoline_data);
return virt_to_phys(trampoline_base);
@@ -126,7 +155,7 @@
* a given CPU
*/
-static void __init smp_store_cpu_info(int id)
+static void __devinit smp_store_cpu_info(int id)
{
struct cpuinfo_x86 *c = cpu_data + id;
@@ -172,7 +201,7 @@
goto valid_k7;
/* If we get here, it's not a certified SMP capable AMD system.
*/
- tainted |= TAINT_UNSAFE_SMP;
+ add_taint(TAINT_UNSAFE_SMP);
}
valid_k7:
@@ -199,7 +228,7 @@
unsigned long long t0;
unsigned long long sum, avg;
long long delta;
- unsigned long one_usec;
+ unsigned int one_usec;
int buggy = 0;
printk(KERN_INFO "checking TSC synchronization across %u CPUs: ",
num_booting_cpus());
@@ -320,7 +349,7 @@
static atomic_t init_deasserted;
-static void __init smp_callin(void)
+static void __devinit smp_callin(void)
{
int cpuid, phys_id;
unsigned long timeout;
@@ -405,16 +434,48 @@
/*
* Synchronize the TSC with the BP
*/
- if (cpu_has_tsc && cpu_khz)
+ if (cpu_has_tsc && cpu_khz && !tsc_sync_disabled)
synchronize_tsc_ap();
}
static int cpucount;
+
+static inline void
+set_cpu_sibling_map(int cpu)
+{
+ int i;
+
+ if (smp_num_siblings > 1) {
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_isset(i, cpu_callout_map))
+ continue;
+ if (cpu_core_id[cpu] == cpu_core_id[i]) {
+ cpu_set(i, cpu_sibling_map[cpu]);
+ cpu_set(cpu, cpu_sibling_map[i]);
+ }
+ }
+ } else {
+ cpu_set(cpu, cpu_sibling_map[cpu]);
+ }
+
+ if (current_cpu_data.x86_num_cores > 1) {
+ for (i = 0; i < NR_CPUS; i++) {
+ if (!cpu_isset(i, cpu_callout_map))
+ continue;
+ if (phys_proc_id[cpu] == phys_proc_id[i]) {
+ cpu_set(i, cpu_core_map[cpu]);
+ cpu_set(cpu, cpu_core_map[i]);
+ }
+ }
+ } else {
+ cpu_core_map[cpu] = cpu_sibling_map[cpu];
+ }
+}
/*
* Activate a secondary processor.
*/
-static void __init start_secondary(void *unused)
+static void __devinit start_secondary(void *unused)
{
/*
* Dont put anything before smp_callin(), SMP
@@ -437,7 +498,23 @@
* the local TLBs too.
*/
local_flush_tlb();
+
+ /* This must be done before setting cpu_online_map */
+ set_cpu_sibling_map(raw_smp_processor_id());
+ wmb();
+
+ /*
+ * We need to hold call_lock, so there is no inconsistency
+ * between the time smp_call_function() determines number of
+ * IPI receipients, and the time when the determination is made
+ * for which cpus receive the IPI. Holding this
+ * lock helps us to not include this cpu in a currently in progress
+ * smp_call_function().
+ */
+ lock_ipi_call_lock();
cpu_set(smp_processor_id(), cpu_online_map);
+ unlock_ipi_call_lock();
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
/* We can take interrupts now: we're officially "up". */
local_irq_enable();
@@ -452,7 +529,7 @@
* from the task structure
* This function must not return.
*/
-void __init initialize_secondary(void)
+void __devinit initialize_secondary(void)
{
/*
* We don't actually need to load the full TSS,
@@ -474,10 +551,10 @@
#ifdef CONFIG_NUMA
/* which logical CPUs are on which nodes */
-cpumask_t node_2_cpu_mask[MAX_NUMNODES] =
+cpumask_t node_2_cpu_mask[MAX_NUMNODES] __read_mostly =
{ [0 ... MAX_NUMNODES-1] = CPU_MASK_NONE };
/* which node each logical CPU is on */
-int cpu_2_node[NR_CPUS] = { [0 ... NR_CPUS-1] = 0 };
+int cpu_2_node[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = 0 };
EXPORT_SYMBOL(cpu_2_node);
/* set up a mapping between cpu and node. */
@@ -505,7 +582,7 @@
#endif /* CONFIG_NUMA */
-u8 cpu_2_logical_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+u8 cpu_2_logical_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] =
BAD_APICID };
static void map_cpu_to_logical_apicid(void)
{
@@ -566,7 +643,7 @@
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-static int __init
+static int __devinit
wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status = 0, accept_status = 0;
@@ -612,7 +689,7 @@
#endif /* WAKE_SECONDARY_VIA_NMI */
#ifdef WAKE_SECONDARY_VIA_INIT
-static int __init
+static int __devinit
wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status = 0, accept_status = 0;
@@ -747,8 +824,43 @@
#endif /* WAKE_SECONDARY_VIA_INIT */
extern cpumask_t cpu_initialized;
-
-static int __init do_boot_cpu(int apicid)
+static inline int alloc_cpu_id(void)
+{
+ cpumask_t tmp_map;
+ int cpu;
+ cpus_complement(tmp_map, cpu_present_map);
+ cpu = first_cpu(tmp_map);
+ if (cpu >= NR_CPUS)
+ return -ENODEV;
+ return cpu;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static struct task_struct * __devinitdata cpu_idle_tasks[NR_CPUS];
+static inline struct task_struct * alloc_idle_task(int cpu)
+{
+ struct task_struct *idle;
+
+ if ((idle = cpu_idle_tasks[cpu]) != NULL) {
+ /* initialize thread_struct. we really want to avoid destroy
+ * idle tread
+ */
+ idle->thread.esp = (unsigned long)(((struct pt_regs *)
+ (THREAD_SIZE + (unsigned long) idle->thread_info)) - 1);
+ init_idle(idle, cpu);
+ return idle;
+ }
+ idle = fork_idle(cpu);
+
+ if (!IS_ERR(idle))
+ cpu_idle_tasks[cpu] = idle;
+ return idle;
+}
+#else
+#define alloc_idle_task(cpu) fork_idle(cpu)
+#endif
+
+static int __devinit do_boot_cpu(int apicid, int cpu)
/*
* NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad
* (ie clustered apic addressing mode), this is a LOGICAL apic ID.
@@ -757,16 +869,17 @@
{
struct task_struct *idle;
unsigned long boot_error;
- int timeout, cpu;
+ int timeout;
unsigned long start_eip;
unsigned short nmi_high = 0, nmi_low = 0;
- cpu = ++cpucount;
+ ++cpucount;
+
/*
* We can't use kernel_thread since we must avoid to
* reschedule the child.
*/
- idle = fork_idle(cpu);
+ idle = alloc_idle_task(cpu);
if (IS_ERR(idle))
panic("failed fork for CPU %d", cpu);
idle->thread.eip = (unsigned long) start_secondary;
@@ -833,13 +946,16 @@
inquire_remote_apic(apicid);
}
}
- x86_cpu_to_apicid[cpu] = apicid;
+
if (boot_error) {
/* Try to put things back the way they were before ... */
unmap_cpu_to_logical_apicid(cpu);
cpu_clear(cpu, cpu_callout_map); /* was set here
(do_boot_cpu()) */
cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */
cpucount--;
+ } else {
+ x86_cpu_to_apicid[cpu] = apicid;
+ cpu_set(cpu, cpu_present_map);
}
/* mark "stuck" area as not stuck */
@@ -847,6 +963,75 @@
return boot_error;
}
+
+#ifdef CONFIG_HOTPLUG_CPU
+void cpu_exit_clear(void)
+{
+ int cpu = raw_smp_processor_id();
+
+ idle_task_exit();
+
+ cpucount --;
+ cpu_uninit();
+ irq_ctx_exit(cpu);
+
+ cpu_clear(cpu, cpu_callout_map);
+ cpu_clear(cpu, cpu_callin_map);
+ cpu_clear(cpu, cpu_present_map);
+
+ cpu_clear(cpu, smp_commenced_mask);
+ unmap_cpu_to_logical_apicid(cpu);
+}
+
+struct warm_boot_cpu_info {
+ struct completion *complete;
+ int apicid;
+ int cpu;
+};
+
+static void __devinit do_warm_boot_cpu(void *p)
+{
+ struct warm_boot_cpu_info *info = p;
+ do_boot_cpu(info->apicid, info->cpu);
+ complete(info->complete);
+}
+
+int __devinit smp_prepare_cpu(int cpu)
+{
+ DECLARE_COMPLETION(done);
+ struct warm_boot_cpu_info info;
+ struct work_struct task;
+ int apicid, ret;
+
+ lock_cpu_hotplug();
+ apicid = x86_cpu_to_apicid[cpu];
+ if (apicid == BAD_APICID) {
+ ret = -ENODEV;
+ goto exit;
+ }
+
+ info.complete = &done;
+ info.apicid = apicid;
+ info.cpu = cpu;
+ INIT_WORK(&task, do_warm_boot_cpu, &info);
+
+ tsc_sync_disabled = 1;
+
+ /* init low mem mapping */
+ clone_pgd_range(swapper_pg_dir, swapper_pg_dir + USER_PGD_PTRS,
+ KERNEL_PGD_PTRS);
+ flush_tlb_all();
+ schedule_work(&task);
+ wait_for_completion(&done);
+
+ tsc_sync_disabled = 0;
+ zap_low_mappings();
+ ret = 0;
+exit:
+ unlock_cpu_hotplug();
+ return ret;
+}
+#endif
static void smp_tune_scheduling (void)
{
@@ -885,10 +1070,9 @@
static int boot_cpu_logical_apicid;
/* Where the IO area was mapped on multiquad, always 0 otherwise */
void *xquad_portio;
-
-cpumask_t cpu_sibling_map[NR_CPUS] __cacheline_aligned;
-cpumask_t cpu_core_map[NR_CPUS] __cacheline_aligned;
-EXPORT_SYMBOL(cpu_core_map);
+#ifdef CONFIG_X86_NUMAQ
+EXPORT_SYMBOL(xquad_portio);
+#endif
static void __init smp_boot_cpus(unsigned int max_cpus)
{
@@ -1006,7 +1190,7 @@
prepare_for_smp();
#endif
- if (do_boot_cpu(apicid))
+ if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
printk("CPU #%d not responding - cannot use it.\n",
apicid);
else
@@ -1058,44 +1242,8 @@
cpus_clear(cpu_core_map[cpu]);
}
- for (cpu = 0; cpu < NR_CPUS; cpu++) {
- struct cpuinfo_x86 *c = cpu_data + cpu;
- int siblings = 0;
- int i;
- if (!cpu_isset(cpu, cpu_callout_map))
- continue;
-
- if (smp_num_siblings > 1) {
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_isset(i, cpu_callout_map))
- continue;
- if (cpu_core_id[cpu] == cpu_core_id[i]) {
- siblings++;
- cpu_set(i, cpu_sibling_map[cpu]);
- }
- }
- } else {
- siblings++;
- cpu_set(cpu, cpu_sibling_map[cpu]);
- }
-
- if (siblings != smp_num_siblings) {
- printk(KERN_WARNING "WARNING: %d siblings found for
CPU%d, should be %d\n", siblings, cpu, smp_num_siblings);
- smp_num_siblings = siblings;
- }
-
- if (c->x86_num_cores > 1) {
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_isset(i, cpu_callout_map))
- continue;
- if (phys_proc_id[cpu] == phys_proc_id[i]) {
- cpu_set(i, cpu_core_map[cpu]);
- }
- }
- } else {
- cpu_core_map[cpu] = cpu_sibling_map[cpu];
- }
- }
+ cpu_set(0, cpu_sibling_map[0]);
+ cpu_set(0, cpu_core_map[0]);
smpboot_setup_io_apic();
@@ -1112,6 +1260,9 @@
who understands all this stuff should rewrite it properly. --RR 15/Jul/02 */
void __init smp_prepare_cpus(unsigned int max_cpus)
{
+ smp_commenced_mask = cpumask_of_cpu(0);
+ cpu_callin_map = cpumask_of_cpu(0);
+ mb();
smp_boot_cpus(max_cpus);
}
@@ -1119,18 +1270,92 @@
{
cpu_set(smp_processor_id(), cpu_online_map);
cpu_set(smp_processor_id(), cpu_callout_map);
-}
+ cpu_set(smp_processor_id(), cpu_present_map);
+ cpu_set(smp_processor_id(), cpu_possible_map);
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void
+remove_siblinginfo(int cpu)
+{
+ int sibling;
+
+ for_each_cpu_mask(sibling, cpu_sibling_map[cpu])
+ cpu_clear(cpu, cpu_sibling_map[sibling]);
+ for_each_cpu_mask(sibling, cpu_core_map[cpu])
+ cpu_clear(cpu, cpu_core_map[sibling]);
+ cpus_clear(cpu_sibling_map[cpu]);
+ cpus_clear(cpu_core_map[cpu]);
+ phys_proc_id[cpu] = BAD_APICID;
+ cpu_core_id[cpu] = BAD_APICID;
+}
+
+int __cpu_disable(void)
+{
+ cpumask_t map = cpu_online_map;
+ int cpu = smp_processor_id();
+
+ /*
+ * Perhaps use cpufreq to drop frequency, but that could go
+ * into generic code.
+ *
+ * We won't take down the boot processor on i386 due to some
+ * interrupts only being able to be serviced by the BSP.
+ * Especially so if we're not using an IOAPIC -zwane
+ */
+ if (cpu == 0)
+ return -EBUSY;
+
+ /* We enable the timer again on the exit path of the death loop */
+ disable_APIC_timer();
+ /* Allow any queued timer interrupts to get serviced */
+ local_irq_enable();
+ mdelay(1);
+ local_irq_disable();
+
+ remove_siblinginfo(cpu);
+
+ cpu_clear(cpu, map);
+ fixup_irqs(map);
+ /* It's now safe to remove this processor from the online map */
+ cpu_clear(cpu, cpu_online_map);
+ return 0;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ /* We don't do anything here: idle task is faking death itself. */
+ unsigned int i;
+
+ for (i = 0; i < 10; i++) {
+ /* They ack this in play_dead by setting CPU_DEAD */
+ if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
+ printk ("CPU %d is now offline\n", cpu);
+ return;
+ }
+ msleep(100);
+ }
+ printk(KERN_ERR "CPU %u didn't die...\n", cpu);
+}
+#else /* ... !CONFIG_HOTPLUG_CPU */
+int __cpu_disable(void)
+{
+ return -ENOSYS;
+}
+
+void __cpu_die(unsigned int cpu)
+{
+ /* We said "no" in __cpu_disable */
+ BUG();
+}
+#endif /* CONFIG_HOTPLUG_CPU */
int __devinit __cpu_up(unsigned int cpu)
{
- /* This only works at boot for x86. See "rewrite" above. */
- if (cpu_isset(cpu, smp_commenced_mask)) {
- local_irq_enable();
- return -ENOSYS;
- }
-
/* In case one didn't come up */
if (!cpu_isset(cpu, cpu_callin_map)) {
+ printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
local_irq_enable();
return -EIO;
}
@@ -1141,6 +1366,7 @@
#endif
local_irq_enable();
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
/* Unleash the CPU! */
cpu_set(cpu, smp_commenced_mask);
while (!cpu_isset(cpu, cpu_online_map))
@@ -1154,10 +1380,12 @@
setup_ioapic_dest();
#endif
zap_low_mappings();
+#ifndef CONFIG_HOTPLUG_CPU
/*
* Disable executability of the SMP trampoline:
*/
set_kernel_exec((unsigned long)trampoline_base, trampoline_exec);
+#endif
}
void __init smp_intr_init(void)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/time-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/time-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/time-xen.c Tue Jan 31 19:55:22 2006
@@ -72,7 +72,10 @@
#include <xen/evtchn.h>
-extern spinlock_t i8259A_lock;
+#if defined (__i386__)
+#include <asm/i8259.h>
+#endif
+
int pit_latch_buggy; /* extern */
u64 jiffies_64 = INITIAL_JIFFIES;
@@ -88,22 +91,25 @@
struct timezone __sys_tz __section_sys_tz;
#endif
-#if defined(__x86_64__)
unsigned int cpu_khz; /* Detected as we calibrate the TSC */
-#else
-unsigned long cpu_khz; /* Detected as we calibrate the TSC */
-#endif
+EXPORT_SYMBOL(cpu_khz);
extern unsigned long wall_jiffies;
DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+#if defined (__i386__)
+#include <asm/i8253.h>
+#endif
DEFINE_SPINLOCK(i8253_lock);
EXPORT_SYMBOL(i8253_lock);
extern struct init_timer_opts timer_tsc_init;
extern struct timer_opts timer_tsc;
-struct timer_opts *cur_timer = &timer_tsc;
+#define timer_none timer_tsc
+struct timer_opts *cur_timer __read_mostly = &timer_tsc;
/* These are peridically updated in shared_info, and then copied here. */
struct shadow_time_info {
@@ -201,6 +207,14 @@
return product;
}
+#if defined (__i386__)
+int read_current_timer(unsigned long *timer_val)
+{
+ rdtscl(*timer_val);
+ return 0;
+}
+#endif
+
void init_cpu_khz(void)
{
u64 __cpu_khz = 1000000ULL << 32;
@@ -252,10 +266,7 @@
set_normalized_timespec(&xtime, xtime_sec, xtime_nsec);
set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
- time_adjust = 0; /* stop active adjtime() */
- time_status |= STA_UNSYNC;
- time_maxerror = NTP_PHASE_LIMIT;
- time_esterror = NTP_PHASE_LIMIT;
+ ntp_clear();
}
static void update_wallclock(void)
@@ -619,10 +630,11 @@
return retval;
}
+EXPORT_SYMBOL(get_cmos_time);
+
static void sync_cmos_clock(unsigned long dummy);
-static struct timer_list sync_cmos_timer =
- TIMER_INITIALIZER(sync_cmos_clock, 0, 0);
+static DEFINE_TIMER(sync_cmos_timer, sync_cmos_clock, 0, 0);
static void sync_cmos_clock(unsigned long dummy)
{
@@ -636,7 +648,7 @@
* This code is run on a timer. If the clock is set, that timer
* may not expire at the correct time. Thus, we adjust...
*/
- if ((time_status & STA_UNSYNC) != 0)
+ if (!ntp_synced())
/*
* Not synced, exit, do not restart a timer (if one is
* running, let it run out).
@@ -671,6 +683,7 @@
static long clock_cmos_diff, sleep_start;
+static struct timer_opts *last_timer;
static int timer_suspend(struct sys_device *dev, pm_message_t state)
{
/*
@@ -679,6 +692,10 @@
clock_cmos_diff = -get_cmos_time();
clock_cmos_diff += get_seconds();
sleep_start = get_cmos_time();
+ last_timer = cur_timer;
+ cur_timer = &timer_none;
+ if (last_timer->suspend)
+ last_timer->suspend(state);
return 0;
}
@@ -700,6 +717,11 @@
write_sequnlock_irqrestore(&xtime_lock, flags);
jiffies += sleep_length;
wall_jiffies += sleep_length;
+ if (last_timer->resume)
+ last_timer->resume();
+ cur_timer = last_timer;
+ last_timer = NULL;
+ touch_softlockup_watchdog();
return 0;
}
@@ -784,14 +806,13 @@
update_wallclock();
init_cpu_khz();
- printk(KERN_INFO "Xen reported: %lu.%03lu MHz processor.\n",
+ printk(KERN_INFO "Xen reported: %u.%03u MHz processor.\n",
cpu_khz / 1000, cpu_khz % 1000);
#if defined(__x86_64__)
vxtime.mode = VXTIME_TSC;
vxtime.quot = (1000000L << 32) / vxtime_hz;
vxtime.tsc_quot = (1000L << 32) / cpu_khz;
- vxtime.hz = vxtime_hz;
sync_core();
rdtscll(vxtime.last_tsc);
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/traps-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/traps-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/traps-xen.c Tue Jan 31 19:55:22 2006
@@ -27,6 +27,7 @@
#include <linux/ptrace.h>
#include <linux/utsname.h>
#include <linux/kprobes.h>
+#include <linux/kexec.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
@@ -51,7 +52,6 @@
#include <asm/arch_hooks.h>
#include <asm/kdebug.h>
-#include <linux/irq.h>
#include <linux/module.h>
#include "mach_traps.h"
@@ -101,6 +101,7 @@
spin_unlock_irqrestore(&die_notifier_lock, flags);
return err;
}
+EXPORT_SYMBOL(register_die_notifier);
static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
{
@@ -205,8 +206,8 @@
unsigned short ss;
esp = (unsigned long) (®s->esp);
- ss = __KERNEL_DS;
- if (regs->xcs & 2) {
+ savesegment(ss, ss);
+ if (user_mode(regs)) {
in_kernel = 0;
esp = regs->esp;
ss = regs->xss & 0xffff;
@@ -230,22 +231,22 @@
* time of the fault..
*/
if (in_kernel) {
- u8 *eip;
+ u8 __user *eip;
printk("\nStack: ");
show_stack(NULL, (unsigned long*)esp);
printk("Code: ");
- eip = (u8 *)regs->eip - 43;
+ eip = (u8 __user *)regs->eip - 43;
for (i = 0; i < 64; i++, eip++) {
unsigned char c;
- if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) {
+ if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c,
eip)) {
printk(" Bad EIP value.");
break;
}
- if (eip == (u8 *)regs->eip)
+ if (eip == (u8 __user *)regs->eip)
printk("<%02x> ", c);
else
printk("%02x ", c);
@@ -262,20 +263,17 @@
char c;
unsigned long eip;
- if (regs->xcs & 2)
- goto no_bug; /* Not in kernel */
-
eip = regs->eip;
if (eip < PAGE_OFFSET)
goto no_bug;
- if (__get_user(ud2, (unsigned short *)eip))
+ if (__get_user(ud2, (unsigned short __user *)eip))
goto no_bug;
if (ud2 != 0x0b0f)
goto no_bug;
- if (__get_user(line, (unsigned short *)(eip + 2)))
+ if (__get_user(line, (unsigned short __user *)(eip + 2)))
goto bug;
- if (__get_user(file, (char **)(eip + 4)) ||
+ if (__get_user(file, (char * __user *)(eip + 4)) ||
(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
file = "<bad filename>";
@@ -290,6 +288,9 @@
printk("Kernel BUG\n");
}
+/* This is gone through when something in the kernel
+ * has done something bad and is about to be terminated.
+*/
void die(const char * str, struct pt_regs * regs, long err)
{
static struct {
@@ -303,7 +304,7 @@
};
static int die_counter;
- if (die.lock_owner != _smp_processor_id()) {
+ if (die.lock_owner != raw_smp_processor_id()) {
console_verbose();
spin_lock_irq(&die.lock);
die.lock_owner = smp_processor_id();
@@ -337,6 +338,10 @@
bust_spinlocks(0);
die.lock_owner = -1;
spin_unlock_irq(&die.lock);
+
+ if (kexec_should_crash(current))
+ crash_kexec(regs);
+
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -350,26 +355,28 @@
static inline void die_if_kernel(const char * str, struct pt_regs * regs, long
err)
{
- if (!(regs->eflags & VM_MASK) && !(2 & regs->xcs))
+ if (!user_mode_vm(regs))
die(str, regs, err);
}
-static void do_trap(int trapnr, int signr, char *str, int vm86,
- struct pt_regs * regs, long error_code, siginfo_t
*info)
-{
+static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
+ struct pt_regs * regs, long error_code,
+ siginfo_t *info)
+{
+ struct task_struct *tsk = current;
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = trapnr;
+
if (regs->eflags & VM_MASK) {
if (vm86)
goto vm86_trap;
goto trap_signal;
}
- if (!(regs->xcs & 2))
+ if (!user_mode(regs))
goto kernel_trap;
trap_signal: {
- struct task_struct *tsk = current;
- tsk->thread.error_code = error_code;
- tsk->thread.trap_no = trapnr;
if (info)
force_sig_info(signr, info, tsk);
else
@@ -454,7 +461,8 @@
#endif
DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0)
-fastcall void do_general_protection(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_general_protection(struct pt_regs * regs,
+ long error_code)
{
/*
* If we trapped on an LDT access then ensure that the default_ldt is
@@ -470,10 +478,13 @@
}
}
+ current->thread.error_code = error_code;
+ current->thread.trap_no = 13;
+
if (regs->eflags & VM_MASK)
goto gp_in_vm86;
- if (!(regs->xcs & 2))
+ if (!user_mode(regs))
goto gp_in_kernel;
current->thread.error_code = error_code;
@@ -533,6 +544,10 @@
void die_nmi (struct pt_regs *regs, const char *msg)
{
+ if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 0, SIGINT) ==
+ NOTIFY_STOP)
+ return;
+
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
@@ -547,6 +562,15 @@
console_silent();
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
+
+ /* If we are in kernel we are probably nested up pretty bad
+ * and might aswell get out now while we still can.
+ */
+ if (!user_mode(regs)) {
+ current->thread.trap_no = 2;
+ crash_kexec(regs);
+ }
+
do_exit(SIGSEGV);
}
@@ -612,7 +636,7 @@
++nmi_count(cpu);
- if (!nmi_callback(regs, cpu))
+ if (!rcu_dereference(nmi_callback)(regs, cpu))
default_do_nmi(regs);
nmi_exit();
@@ -620,16 +644,18 @@
void set_nmi_callback(nmi_callback_t callback)
{
- nmi_callback = callback;
-}
+ rcu_assign_pointer(nmi_callback, callback);
+}
+EXPORT_SYMBOL_GPL(set_nmi_callback);
void unset_nmi_callback(void)
{
nmi_callback = dummy_nmi_callback;
}
+EXPORT_SYMBOL_GPL(unset_nmi_callback);
#ifdef CONFIG_KPROBES
-fastcall void do_int3(struct pt_regs *regs, long error_code)
+fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
{
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
@@ -663,12 +689,12 @@
* find every occurrence of the TF bit that could be saved away even
* by user code)
*/
-fastcall void do_debug(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code)
{
unsigned int condition;
struct task_struct *tsk = current;
- condition = HYPERVISOR_get_debugreg(6);
+ get_debugreg(condition, 6);
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
SIGTRAP) == NOTIFY_STOP)
@@ -699,7 +725,7 @@
* check for kernel mode by just checking the CPL
* of CS.
*/
- if ((regs->xcs & 2) == 0)
+ if (!user_mode(regs))
goto clear_TF_reenable;
}
@@ -710,7 +736,7 @@
* the signal is delivered.
*/
clear_dr7:
- HYPERVISOR_set_debugreg(7, 0);
+ set_debugreg(0, 7);
return;
debug_vm86:
@@ -757,15 +783,18 @@
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
- case 0x000:
- default:
+ switch (swd & ~cwd & 0x3f) {
+ case 0x000: /* No unmasked exception */
+ return;
+ default: /* Multiple exceptions */
break;
case 0x001: /* Invalid Op */
- case 0x041: /* Stack Fault */
- case 0x241: /* Stack Fault | Direction */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
info.si_code = FPE_FLTINV;
- /* Should we clear the SF or let user space do it ????
*/
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
@@ -855,9 +884,9 @@
error_code);
return;
}
- die_if_kernel("cache flush denied", regs, error_code);
current->thread.trap_no = 19;
current->thread.error_code = error_code;
+ die_if_kernel("cache flush denied", regs, error_code);
force_sig(SIGSEGV, current);
}
}
@@ -953,7 +982,7 @@
* it uses the read-only mapped virtual address.
*/
idt_descr.address = fix_to_virt(FIX_F00F_IDT);
- __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+ load_idt(&idt_descr);
}
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/traps.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/traps.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/traps.c Tue Jan 31 19:55:22 2006
@@ -27,6 +27,7 @@
#include <linux/ptrace.h>
#include <linux/utsname.h>
#include <linux/kprobes.h>
+#include <linux/kexec.h>
#ifdef CONFIG_EISA
#include <linux/ioport.h>
@@ -51,7 +52,6 @@
#include <asm/arch_hooks.h>
#include <asm/kdebug.h>
-#include <linux/irq.h>
#include <linux/module.h>
#include "mach_traps.h"
@@ -104,6 +104,7 @@
spin_unlock_irqrestore(&die_notifier_lock, flags);
return err;
}
+EXPORT_SYMBOL(register_die_notifier);
static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
{
@@ -208,8 +209,8 @@
unsigned short ss;
esp = (unsigned long) (®s->esp);
- ss = __KERNEL_DS;
- if (regs->xcs & 3) {
+ savesegment(ss, ss);
+ if (user_mode(regs)) {
in_kernel = 0;
esp = regs->esp;
ss = regs->xss & 0xffff;
@@ -233,22 +234,22 @@
* time of the fault..
*/
if (in_kernel) {
- u8 *eip;
+ u8 __user *eip;
printk("\nStack: ");
show_stack(NULL, (unsigned long*)esp);
printk("Code: ");
- eip = (u8 *)regs->eip - 43;
+ eip = (u8 __user *)regs->eip - 43;
for (i = 0; i < 64; i++, eip++) {
unsigned char c;
- if (eip < (u8 *)PAGE_OFFSET || __get_user(c, eip)) {
+ if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c,
eip)) {
printk(" Bad EIP value.");
break;
}
- if (eip == (u8 *)regs->eip)
+ if (eip == (u8 __user *)regs->eip)
printk("<%02x> ", c);
else
printk("%02x ", c);
@@ -265,20 +266,17 @@
char c;
unsigned long eip;
- if (regs->xcs & 3)
- goto no_bug; /* Not in kernel */
-
eip = regs->eip;
if (eip < PAGE_OFFSET)
goto no_bug;
- if (__get_user(ud2, (unsigned short *)eip))
+ if (__get_user(ud2, (unsigned short __user *)eip))
goto no_bug;
if (ud2 != 0x0b0f)
goto no_bug;
- if (__get_user(line, (unsigned short *)(eip + 2)))
+ if (__get_user(line, (unsigned short __user *)(eip + 2)))
goto bug;
- if (__get_user(file, (char **)(eip + 4)) ||
+ if (__get_user(file, (char * __user *)(eip + 4)) ||
(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
file = "<bad filename>";
@@ -293,6 +291,9 @@
printk("Kernel BUG\n");
}
+/* This is gone through when something in the kernel
+ * has done something bad and is about to be terminated.
+*/
void die(const char * str, struct pt_regs * regs, long err)
{
static struct {
@@ -306,7 +307,7 @@
};
static int die_counter;
- if (die.lock_owner != _smp_processor_id()) {
+ if (die.lock_owner != raw_smp_processor_id()) {
console_verbose();
spin_lock_irq(&die.lock);
die.lock_owner = smp_processor_id();
@@ -340,6 +341,10 @@
bust_spinlocks(0);
die.lock_owner = -1;
spin_unlock_irq(&die.lock);
+
+ if (kexec_should_crash(current))
+ crash_kexec(regs);
+
if (in_interrupt())
panic("Fatal exception in interrupt");
@@ -353,26 +358,28 @@
static inline void die_if_kernel(const char * str, struct pt_regs * regs, long
err)
{
- if (!(regs->eflags & VM_MASK) && !(3 & regs->xcs))
+ if (!user_mode_vm(regs))
die(str, regs, err);
}
-static void do_trap(int trapnr, int signr, char *str, int vm86,
- struct pt_regs * regs, long error_code, siginfo_t
*info)
-{
+static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
+ struct pt_regs * regs, long error_code,
+ siginfo_t *info)
+{
+ struct task_struct *tsk = current;
+ tsk->thread.error_code = error_code;
+ tsk->thread.trap_no = trapnr;
+
if (regs->eflags & VM_MASK) {
if (vm86)
goto vm86_trap;
goto trap_signal;
}
- if (!(regs->xcs & 3))
+ if (!user_mode(regs))
goto kernel_trap;
trap_signal: {
- struct task_struct *tsk = current;
- tsk->thread.error_code = error_code;
- tsk->thread.trap_no = trapnr;
if (info)
force_sig_info(signr, info, tsk);
else
@@ -453,7 +460,8 @@
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0)
-fastcall void do_general_protection(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_general_protection(struct pt_regs * regs,
+ long error_code)
{
int cpu = get_cpu();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
@@ -485,10 +493,13 @@
}
put_cpu();
+ current->thread.error_code = error_code;
+ current->thread.trap_no = 13;
+
if (regs->eflags & VM_MASK)
goto gp_in_vm86;
- if (!(regs->xcs & 3))
+ if (!user_mode(regs))
goto gp_in_kernel;
current->thread.error_code = error_code;
@@ -548,6 +559,10 @@
void die_nmi (struct pt_regs *regs, const char *msg)
{
+ if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 0, SIGINT) ==
+ NOTIFY_STOP)
+ return;
+
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
@@ -562,6 +577,15 @@
console_silent();
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
+
+ /* If we are in kernel we are probably nested up pretty bad
+ * and might aswell get out now while we still can.
+ */
+ if (!user_mode(regs)) {
+ current->thread.trap_no = 2;
+ crash_kexec(regs);
+ }
+
do_exit(SIGSEGV);
}
@@ -617,9 +641,17 @@
nmi_enter();
cpu = smp_processor_id();
+
+#ifdef CONFIG_HOTPLUG_CPU
+ if (!cpu_online(cpu)) {
+ nmi_exit();
+ return;
+ }
+#endif
+
++nmi_count(cpu);
- if (!nmi_callback(regs, cpu))
+ if (!rcu_dereference(nmi_callback)(regs, cpu))
default_do_nmi(regs);
nmi_exit();
@@ -627,16 +659,18 @@
void set_nmi_callback(nmi_callback_t callback)
{
- nmi_callback = callback;
-}
+ rcu_assign_pointer(nmi_callback, callback);
+}
+EXPORT_SYMBOL_GPL(set_nmi_callback);
void unset_nmi_callback(void)
{
nmi_callback = dummy_nmi_callback;
}
+EXPORT_SYMBOL_GPL(unset_nmi_callback);
#ifdef CONFIG_KPROBES
-fastcall void do_int3(struct pt_regs *regs, long error_code)
+fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
{
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
@@ -670,12 +704,12 @@
* find every occurrence of the TF bit that could be saved away even
* by user code)
*/
-fastcall void do_debug(struct pt_regs * regs, long error_code)
+fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code)
{
unsigned int condition;
struct task_struct *tsk = current;
- __asm__ __volatile__("movl %%db6,%0" : "=r" (condition));
+ get_debugreg(condition, 6);
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
SIGTRAP) == NOTIFY_STOP)
@@ -706,7 +740,7 @@
* check for kernel mode by just checking the CPL
* of CS.
*/
- if ((regs->xcs & 3) == 0)
+ if (!user_mode(regs))
goto clear_TF_reenable;
}
@@ -717,9 +751,7 @@
* the signal is delivered.
*/
clear_dr7:
- __asm__("movl %0,%%db7"
- : /* no output */
- : "r" (0));
+ set_debugreg(0, 7);
return;
debug_vm86:
@@ -766,15 +798,18 @@
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
- case 0x000:
- default:
+ switch (swd & ~cwd & 0x3f) {
+ case 0x000: /* No unmasked exception */
+ return;
+ default: /* Multiple exceptions */
break;
case 0x001: /* Invalid Op */
- case 0x041: /* Stack Fault */
- case 0x241: /* Stack Fault | Direction */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
info.si_code = FPE_FLTINV;
- /* Should we clear the SF or let user space do it ????
*/
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
@@ -864,9 +899,9 @@
error_code);
return;
}
- die_if_kernel("cache flush denied", regs, error_code);
current->thread.trap_no = 19;
current->thread.error_code = error_code;
+ die_if_kernel("cache flush denied", regs, error_code);
force_sig(SIGSEGV, current);
}
}
@@ -969,7 +1004,7 @@
* it uses the read-only mapped virtual address.
*/
idt_descr.address = fix_to_virt(FIX_F00F_IDT);
- __asm__ __volatile__("lidt %0" : : "m" (idt_descr));
+ load_idt(&idt_descr);
}
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/vmlinux.lds.S
--- a/linux-2.6-xen-sparse/arch/i386/kernel/vmlinux.lds.S Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/vmlinux.lds.S Tue Jan 31
19:55:22 2006
@@ -1,6 +1,8 @@
/* ld script to make i386 Linux kernel
* Written by Martin Mares <mj@xxxxxxxxxxxxxxxxxxxxxxxx>;
*/
+
+#define LOAD_OFFSET __PAGE_OFFSET
#include <asm-generic/vmlinux.lds.h>
#include <asm/thread_info.h>
@@ -8,17 +10,19 @@
OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
OUTPUT_ARCH(i386)
-ENTRY(startup_32)
+ENTRY(phys_startup_32)
jiffies = jiffies_64;
SECTIONS
{
- . = __PAGE_OFFSET + 0x100000;
+ . = __KERNEL_START;
+ phys_startup_32 = startup_32 - LOAD_OFFSET;
/* read-only */
_text = .; /* Text and read-only data */
- .text : {
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
*(.text)
SCHED_TEXT
LOCK_TEXT
+ KPROBES_TEXT
*(.fixup)
*(.gnu.warning)
} = 0x9090
@@ -27,56 +31,65 @@
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
- __ex_table : { *(__ex_table) }
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
__stop___ex_table = .;
. = ALIGN(16);
__start_smp_alternatives_table = .;
- __smp_alternatives : { *(__smp_alternatives) }
+ __smp_alternatives : AT(ADDR(__smp_alternatives) - LOAD_OFFSET) {
*(__smp_alternatives) }
__stop_smp_alternatives_table = .;
- __smp_replacements : { *(__smp_replacements) }
+ __smp_replacements : AT(ADDR(__smp_replacements) - LOAD_OFFSET) {
*(__smp_replacements) }
RODATA
/* writeable */
- .data : { /* Data */
+ .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
*(.data)
CONSTRUCTORS
}
. = ALIGN(4096);
__nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) }
. = ALIGN(4096);
__nosave_end = .;
. = ALIGN(4096);
- .data.page_aligned : { *(.data.idt) }
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.idt)
+ }
. = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
+ /* rarely changed data like cpu maps */
+ . = ALIGN(32);
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
*(.data.read_mostly) }
_edata = .; /* End of data section */
. = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : { *(.data.init_task) }
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
/* will be freed after init */
. = ALIGN(4096); /* Init code and data */
__init_begin = .;
- .init.text : {
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
_sinittext = .;
*(.init.text)
_einittext = .;
}
- .init.data : { *(.init.data) }
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { *(.init.data) }
. = ALIGN(16);
__setup_start = .;
- .init.setup : { *(.init.setup) }
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { *(.init.setup) }
__setup_end = .;
__initcall_start = .;
- .initcall.init : {
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
*(.initcall1.init)
*(.initcall2.init)
*(.initcall3.init)
@@ -87,33 +100,41 @@
}
__initcall_end = .;
__con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ *(.con_initcall.init)
+ }
__con_initcall_end = .;
SECURITY_INIT
. = ALIGN(4);
__alt_instructions = .;
- .altinstructions : { *(.altinstructions) }
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ *(.altinstructions)
+ }
__alt_instructions_end = .;
- .altinstr_replacement : { *(.altinstr_replacement) }
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
/* .exit.text is discard at runtime, not link time, to deal with references
from .altinstructions and .eh_frame */
- .exit.text : { *(.exit.text) }
- .exit.data : { *(.exit.data) }
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) { *(.exit.text) }
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) { *(.exit.data) }
. = ALIGN(4096);
__initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) { *(.init.ramfs) }
__initramfs_end = .;
. = ALIGN(32);
__per_cpu_start = .;
- .data.percpu : { *(.data.percpu) }
+ .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { *(.data.percpu) }
__per_cpu_end = .;
. = ALIGN(4096);
__init_end = .;
/* freed after init ends here */
__bss_start = .; /* BSS */
- .bss : {
+ .bss.page_aligned : AT(ADDR(.bss.page_aligned) - LOAD_OFFSET) {
*(.bss.page_aligned)
+ }
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
*(.bss)
}
. = ALIGN(4);
@@ -130,12 +151,7 @@
*(.exitcall.exit)
}
- /* Stabs debugging sections. */
- .stab 0 : { *(.stab) }
- .stabstr 0 : { *(.stabstr) }
- .stab.excl 0 : { *(.stab.excl) }
- .stab.exclstr 0 : { *(.stab.exclstr) }
- .stab.index 0 : { *(.stab.index) }
- .stab.indexstr 0 : { *(.stab.indexstr) }
- .comment 0 : { *(.comment) }
+ STABS_DEBUG
+
+ DWARF_DEBUG
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mach-xen/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/mach-xen/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mach-xen/Makefile Tue Jan 31 19:55:22 2006
@@ -2,6 +2,6 @@
# Makefile for the linux kernel.
#
-obj-y := topology.o
+obj-y := setup.o topology.o
topology-y := ../mach-default/topology.o
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/i386/mm/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/mm/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/Makefile Tue Jan 31 19:55:22 2006
@@ -4,7 +4,7 @@
obj-y := init.o pgtable.o fault.o ioremap.o extable.o pageattr.o mmap.o
-obj-$(CONFIG_DISCONTIGMEM) += discontig.o
+obj-$(CONFIG_NUMA) += discontig.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_HIGHMEM) += highmem.o
obj-$(CONFIG_BOOT_IOREMAP) += boot_ioremap.o
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mm/fault-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/mm/fault-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/fault-xen.c Tue Jan 31 19:55:22 2006
@@ -21,6 +21,7 @@
#include <linux/vt_kern.h> /* For unblank_screen() */
#include <linux/highmem.h>
#include <linux/module.h>
+#include <linux/kprobes.h>
#include <linux/percpu.h>
#include <asm/system.h>
@@ -149,7 +150,7 @@
if (instr > limit)
break;
- if (__get_user(opcode, (unsigned char *) instr))
+ if (__get_user(opcode, (unsigned char __user *) instr))
break;
instr_hi = opcode & 0xf0;
@@ -176,7 +177,7 @@
scan_more = 0;
if (instr > limit)
break;
- if (__get_user(opcode, (unsigned char *) instr))
+ if (__get_user(opcode, (unsigned char __user *) instr))
break;
prefetch = (instr_lo == 0xF) &&
(opcode == 0x0D || opcode == 0x18);
@@ -201,6 +202,18 @@
}
return 0;
}
+
+static noinline void force_sig_info_fault(int si_signo, int si_code,
+ unsigned long address, struct task_struct *tsk)
+{
+ siginfo_t info;
+
+ info.si_signo = si_signo;
+ info.si_errno = 0;
+ info.si_code = si_code;
+ info.si_addr = (void __user *)address;
+ force_sig_info(si_signo, &info, tsk);
+}
fastcall void do_invalid_op(struct pt_regs *, unsigned long);
@@ -282,14 +295,14 @@
* bit 1 == 0 means read, 1 means write
* bit 2 == 0 means kernel, 1 means user-mode
*/
-fastcall void do_page_fault(struct pt_regs *regs, unsigned long error_code)
+fastcall void __kprobes do_page_fault(struct pt_regs *regs,
+ unsigned long error_code)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct * vma;
unsigned long address;
- int write;
- siginfo_t info;
+ int write, si_code;
address = HYPERVISOR_shared_info->vcpu_info[
smp_processor_id()].arch.cr2;
@@ -309,7 +322,7 @@
tsk = current;
- info.si_code = SEGV_MAPERR;
+ si_code = SEGV_MAPERR;
/*
* We fault-in kernel-space virtual memory on-demand. The
@@ -389,7 +402,7 @@
* we can handle it..
*/
good_area:
- info.si_code = SEGV_ACCERR;
+ si_code = SEGV_ACCERR;
write = 0;
switch (error_code & 3) {
default: /* 3: write, present */
@@ -463,11 +476,7 @@
/* Kernel addresses are always protection faults */
tsk->thread.error_code = error_code | (address >= TASK_SIZE);
tsk->thread.trap_no = 14;
- info.si_signo = SIGSEGV;
- info.si_errno = 0;
- /* info.si_code has been set above */
- info.si_addr = (void __user *)address;
- force_sig_info(SIGSEGV, &info, tsk);
+ force_sig_info_fault(SIGSEGV, si_code, address, tsk);
return;
}
@@ -523,6 +532,9 @@
printk(KERN_ALERT " printing eip:\n");
printk("%08lx\n", regs->eip);
dump_fault_path(address);
+ tsk->thread.cr2 = address;
+ tsk->thread.trap_no = 14;
+ tsk->thread.error_code = error_code;
die("Oops", regs, error_code);
bust_spinlocks(0);
do_exit(SIGKILL);
@@ -557,11 +569,7 @@
tsk->thread.cr2 = address;
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
- info.si_signo = SIGBUS;
- info.si_errno = 0;
- info.si_code = BUS_ADRERR;
- info.si_addr = (void __user *)address;
- force_sig_info(SIGBUS, &info, tsk);
+ force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
return;
vmalloc_fault:
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mm/highmem-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/mm/highmem-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/highmem-xen.c Tue Jan 31 19:55:22 2006
@@ -1,4 +1,5 @@
#include <linux/highmem.h>
+#include <linux/module.h>
void *kmap(struct page *page)
{
@@ -84,6 +85,24 @@
preempt_check_resched();
}
+/* This is the same as kmap_atomic() but can map memory that doesn't
+ * have a struct page associated with it.
+ */
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
+{
+ enum fixed_addresses idx;
+ unsigned long vaddr;
+
+ inc_preempt_count();
+
+ idx = type + KM_TYPE_NR*smp_processor_id();
+ vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+ set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ __flush_tlb_one(vaddr);
+
+ return (void*) vaddr;
+}
+
struct page *kmap_atomic_to_page(void *ptr)
{
unsigned long idx, vaddr = (unsigned long)ptr;
@@ -97,3 +116,8 @@
return pte_page(*pte);
}
+EXPORT_SYMBOL(kmap);
+EXPORT_SYMBOL(kunmap);
+EXPORT_SYMBOL(kmap_atomic);
+EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_to_page);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mm/init-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/mm/init-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/init-xen.c Tue Jan 31 19:55:22 2006
@@ -231,16 +231,17 @@
extern int is_available_memory(efi_memory_desc_t *);
-static inline int page_is_ram(unsigned long pagenr)
+int page_is_ram(unsigned long pagenr)
{
int i;
unsigned long addr, end;
if (efi_enabled) {
efi_memory_desc_t *md;
-
- for (i = 0; i < memmap.nr_map; i++) {
- md = &memmap.map[i];
+ void *p;
+
+ for (p = memmap.map; p < memmap.map_end; p += memmap.desc_size)
{
+ md = p;
if (!is_available_memory(md))
continue;
addr = (md->phys_addr+PAGE_SIZE-1) >> PAGE_SHIFT;
@@ -316,7 +317,6 @@
{
if (page_is_ram(pfn) && !(bad_ppro && page_kills_ppro(pfn))) {
ClearPageReserved(page);
- set_bit(PG_highmem, &page->flags);
set_page_count(page, 1);
if (pfn < xen_start_info->nr_pages)
__free_page(page);
@@ -325,7 +325,9 @@
SetPageReserved(page);
}
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
+extern void set_highmem_pages_init(int);
+#else
static void __init set_highmem_pages_init(int bad_ppro)
{
int pfn;
@@ -333,9 +335,7 @@
one_highpage_init(pfn_to_page(pfn), pfn, bad_ppro);
totalram_pages += totalhigh_pages;
}
-#else
-extern void set_highmem_pages_init(int);
-#endif /* !CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_FLATMEM */
#else
#define kmap_init() do { } while (0)
@@ -344,12 +344,13 @@
#endif /* CONFIG_HIGHMEM */
unsigned long long __PAGE_KERNEL = _PAGE_KERNEL;
+EXPORT_SYMBOL(__PAGE_KERNEL);
unsigned long long __PAGE_KERNEL_EXEC = _PAGE_KERNEL_EXEC;
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
+extern void __init remap_numa_kva(void);
+#else
#define remap_numa_kva() do {} while (0)
-#else
-extern void __init remap_numa_kva(void);
#endif
pgd_t *swapper_pg_dir;
@@ -390,7 +391,7 @@
permanent_kmaps_init(pgd_base);
}
-#if defined(CONFIG_PM_DISK) || defined(CONFIG_SOFTWARE_SUSPEND)
+#ifdef CONFIG_SOFTWARE_SUSPEND
/*
* Swap suspend & friends need this for resume because things like the
intel-agp
* driver might have split up a kernel 4MB mapping.
@@ -430,7 +431,7 @@
}
static int disable_nx __initdata = 0;
-u64 __supported_pte_mask = ~_PAGE_NX;
+u64 __supported_pte_mask __read_mostly = ~_PAGE_NX;
/*
* noexec = on|off
@@ -584,7 +585,7 @@
#else
num_physpages = max_low_pfn;
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
max_mapnr = num_physpages;
#endif
}
@@ -608,7 +609,7 @@
swiotlb_init();
#endif
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
if (!mem_map)
BUG();
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mm/ioremap-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/mm/ioremap-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/ioremap-xen.c Tue Jan 31 19:55:22 2006
@@ -264,7 +264,7 @@
}
return (void __iomem *) (offset + (char __iomem *)addr);
}
-
+EXPORT_SYMBOL(__ioremap);
/**
* ioremap_nocache - map bus memory into CPU space
@@ -321,11 +321,13 @@
return p;
}
+EXPORT_SYMBOL(ioremap_nocache);
void iounmap(volatile void __iomem *addr)
{
struct vm_struct *p;
- if ((void __force *) addr <= high_memory)
+
+ if ((void __force *)addr <= high_memory)
return;
/*
@@ -337,9 +339,10 @@
return;
write_lock(&vmlist_lock);
- p = __remove_vm_area((void *) (PAGE_MASK & (unsigned long __force)
addr));
+ p = __remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr));
if (!p) {
- printk("iounmap: bad address %p\n", addr);
+ printk(KERN_WARNING "iounmap: bad address %p\n", addr);
+ dump_stack();
goto out_unlock;
}
@@ -354,6 +357,7 @@
write_unlock(&vmlist_lock);
kfree(p);
}
+EXPORT_SYMBOL(iounmap);
#ifdef __i386__
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mm/pgtable-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/mm/pgtable-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mm/pgtable-xen.c Tue Jan 31 19:55:22 2006
@@ -38,13 +38,14 @@
struct page *page;
pg_data_t *pgdat;
unsigned long i;
-
- printk("Mem-info:\n");
+ struct page_state ps;
+
+ printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk(KERN_INFO "Free swap: %6ldkB\n",
nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
- page = pgdat->node_mem_map + i;
+ page = pgdat_page_nr(pgdat, i);
total++;
if (PageHighMem(page))
highmem++;
@@ -56,11 +57,18 @@
shared += page_count(page) - 1;
}
}
- printk("%d pages of RAM\n", total);
- printk("%d pages of HIGHMEM\n",highmem);
- printk("%d reserved pages\n",reserved);
- printk("%d pages shared\n",shared);
- printk("%d pages swap cached\n",cached);
+ printk(KERN_INFO "%d pages of RAM\n", total);
+ printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
+ printk(KERN_INFO "%d reserved pages\n", reserved);
+ printk(KERN_INFO "%d pages shared\n", shared);
+ printk(KERN_INFO "%d pages swap cached\n", cached);
+
+ get_page_state(&ps);
+ printk(KERN_INFO "%lu pages dirty\n", ps.nr_dirty);
+ printk(KERN_INFO "%lu pages writeback\n", ps.nr_writeback);
+ printk(KERN_INFO "%lu pages mapped\n", ps.nr_mapped);
+ printk(KERN_INFO "%lu pages slab\n", ps.nr_slab);
+ printk(KERN_INFO "%lu pages pagetables\n", ps.nr_page_table_pages);
}
/*
@@ -151,16 +159,16 @@
pmd_t *pmd;
if (vaddr & (PMD_SIZE-1)) { /* vaddr is misaligned */
- printk ("set_pmd_pfn: vaddr misaligned\n");
+ printk(KERN_WARNING "set_pmd_pfn: vaddr misaligned\n");
return; /* BUG(); */
}
if (pfn & (PTRS_PER_PTE-1)) { /* pfn is misaligned */
- printk ("set_pmd_pfn: pfn misaligned\n");
+ printk(KERN_WARNING "set_pmd_pfn: pfn misaligned\n");
return; /* BUG(); */
}
pgd = swapper_pg_dir + pgd_index(vaddr);
if (pgd_none(*pgd)) {
- printk ("set_pmd_pfn: pgd_none\n");
+ printk(KERN_WARNING "set_pmd_pfn: pgd_none\n");
return; /* BUG(); */
}
pud = pud_offset(pgd, vaddr);
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/i386/pci/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/pci/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/pci/Makefile Tue Jan 31 19:55:22 2006
@@ -5,7 +5,7 @@
obj-$(CONFIG_PCI_DIRECT) += direct.o
pci-y := fixup.o
-pci-$(CONFIG_ACPI_PCI) += acpi.o
+pci-$(CONFIG_ACPI) += acpi.o
pci-y += legacy.o irq.o
pci-$(CONFIG_X86_VISWS) := visws.o fixup.o
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/pci/irq-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/pci/irq-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/pci/irq-xen.c Tue Jan 31 19:55:22 2006
@@ -11,12 +11,11 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/dmi.h>
#include <asm/io.h>
#include <asm/smp.h>
#include <asm/io_apic.h>
-#include <asm/hw_irq.h>
+#include <linux/irq.h>
#include <linux/acpi.h>
#include "pci.h"
@@ -56,33 +55,57 @@
};
int (*pcibios_enable_irq)(struct pci_dev *dev) = NULL;
-
-/*
- * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
- */
-
-static struct irq_routing_table * __init pirq_find_routing_table(void)
-{
- u8 *addr;
+void (*pcibios_disable_irq)(struct pci_dev *dev) = NULL;
+
+/*
+ * Check passed address for the PCI IRQ Routing Table signature
+ * and perform checksum verification.
+ */
+
+static inline struct irq_routing_table * pirq_check_routing_table(u8 *addr)
+{
struct irq_routing_table *rt;
int i;
u8 sum;
+ rt = (struct irq_routing_table *) addr;
+ if (rt->signature != PIRQ_SIGNATURE ||
+ rt->version != PIRQ_VERSION ||
+ rt->size % 16 ||
+ rt->size < sizeof(struct irq_routing_table))
+ return NULL;
+ sum = 0;
+ for (i=0; i < rt->size; i++)
+ sum += addr[i];
+ if (!sum) {
+ DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ return rt;
+ }
+ return NULL;
+}
+
+
+
+/*
+ * Search 0xf0000 -- 0xfffff for the PCI IRQ Routing Table.
+ */
+
+static struct irq_routing_table * __init pirq_find_routing_table(void)
+{
+ u8 *addr;
+ struct irq_routing_table *rt;
+
#ifdef CONFIG_XEN_PRIVILEGED_GUEST
+ if (pirq_table_addr) {
+ rt = pirq_check_routing_table((u8 *)
isa_bus_to_virt(pirq_table_addr));
+ if (rt)
+ return rt;
+ printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
+ }
for(addr = (u8 *) isa_bus_to_virt(0xf0000); addr < (u8 *)
isa_bus_to_virt(0x100000); addr += 16) {
- rt = (struct irq_routing_table *) addr;
- if (rt->signature != PIRQ_SIGNATURE ||
- rt->version != PIRQ_VERSION ||
- rt->size % 16 ||
- rt->size < sizeof(struct irq_routing_table))
- continue;
- sum = 0;
- for(i=0; i<rt->size; i++)
- sum += addr[i];
- if (!sum) {
- DBG("PCI: Interrupt Routing Table found at 0x%p\n", rt);
+ rt = pirq_check_routing_table(addr);
+ if (rt)
return rt;
- }
}
#endif
@@ -226,6 +249,24 @@
static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
int irq)
{
write_config_nybble(router, 0x55, pirq == 4 ? 5 : pirq, irq);
+ return 1;
+}
+
+/*
+ * The VIA pirq rules are nibble-based, like ALI,
+ * but without the ugly irq number munging.
+ * However, for 82C586, nibble map is different .
+ */
+static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int
pirq)
+{
+ static unsigned int pirqmap[4] = { 3, 2, 5, 1 };
+ return read_config_nybble(router, 0x55, pirqmap[pirq-1]);
+}
+
+static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int
pirq, int irq)
+{
+ static unsigned int pirqmap[4] = { 3, 2, 5, 1 };
+ write_config_nybble(router, 0x55, pirqmap[pirq-1], irq);
return 1;
}
@@ -512,9 +553,20 @@
static __init int via_router_probe(struct irq_router *r, struct pci_dev
*router, u16 device)
{
/* FIXME: We should move some of the quirk fixup stuff here */
+
+ if (router->device == PCI_DEVICE_ID_VIA_82C686 &&
+ device == PCI_DEVICE_ID_VIA_82C586_0) {
+ /* Asus k7m bios wrongly reports 82C686A as 586-compatible */
+ device = PCI_DEVICE_ID_VIA_82C686;
+ }
+
switch(device)
{
case PCI_DEVICE_ID_VIA_82C586_0:
+ r->name = "VIA";
+ r->get = pirq_via586_get;
+ r->set = pirq_via586_set;
+ return 1;
case PCI_DEVICE_ID_VIA_82C596:
case PCI_DEVICE_ID_VIA_82C686:
case PCI_DEVICE_ID_VIA_8231:
@@ -1009,24 +1061,28 @@
subsys_initcall(pcibios_irq_init);
-static void pirq_penalize_isa_irq(int irq)
+static void pirq_penalize_isa_irq(int irq, int active)
{
/*
* If any ISAPnP device reports an IRQ in its list of possible
* IRQ's, we try to avoid assigning it to PCI devices.
*/
- if (irq < 16)
- pirq_penalty[irq] += 100;
-}
-
-void pcibios_penalize_isa_irq(int irq)
-{
-#ifdef CONFIG_ACPI_PCI
+ if (irq < 16) {
+ if (active)
+ pirq_penalty[irq] += 1000;
+ else
+ pirq_penalty[irq] += 100;
+ }
+}
+
+void pcibios_penalize_isa_irq(int irq, int active)
+{
+#ifdef CONFIG_ACPI
if (!acpi_noirq)
- acpi_penalize_isa_irq(irq);
+ acpi_penalize_isa_irq(irq, active);
else
#endif
- pirq_penalize_isa_irq(irq);
+ pirq_penalize_isa_irq(irq, active);
}
static int pirq_enable_irq(struct pci_dev *dev)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/um/kernel/physmem.c
--- a/linux-2.6-xen-sparse/arch/um/kernel/physmem.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/um/kernel/physmem.c Tue Jan 31 19:55:22 2006
@@ -250,16 +250,6 @@
extern unsigned long physmem_size;
-void *to_virt(unsigned long phys)
-{
- return((void *) uml_physmem + phys);
-}
-
-unsigned long to_phys(void *virt)
-{
- return(((unsigned long) virt) - uml_physmem);
-}
-
int init_maps(unsigned long physmem, unsigned long iomem, unsigned long
highmem)
{
struct page *p, *map;
@@ -298,31 +288,6 @@
max_mapnr = total_pages;
return(0);
-}
-
-struct page *phys_to_page(const unsigned long phys)
-{
- return(&mem_map[phys >> PAGE_SHIFT]);
-}
-
-struct page *__virt_to_page(const unsigned long virt)
-{
- return(&mem_map[__pa(virt) >> PAGE_SHIFT]);
-}
-
-phys_t page_to_phys(struct page *page)
-{
- return((page - mem_map) << PAGE_SHIFT);
-}
-
-pte_t mk_pte(struct page *page, pgprot_t pgprot)
-{
- pte_t pte;
-
- pte_set_val(pte, page_to_phys(page), pgprot);
- if(pte_present(pte))
- pte_mknewprot(pte_mknewpage(pte));
- return(pte);
}
/* Changed during early boot */
@@ -355,6 +320,8 @@
#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
+extern int __syscall_stub_start, __binary_start;
+
void setup_physmem(unsigned long start, unsigned long reserve_end,
unsigned long len, unsigned long highmem)
{
@@ -372,6 +339,12 @@
os_print_error(err, "Mapping memory");
exit(1);
}
+
+ /* Special kludge - This page will be mapped in to userspace processes
+ * from physmem_fd, so it needs to be written out there.
+ */
+ os_seek_file(physmem_fd, __pa(&__syscall_stub_start));
+ os_write_file(physmem_fd, &__syscall_stub_start, PAGE_SIZE);
bootmap_size = init_bootmem(pfn, pfn + delta);
free_bootmem(__pa(reserve_end) + bootmap_size,
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/x86_64/Kconfig
--- a/linux-2.6-xen-sparse/arch/x86_64/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/Kconfig Tue Jan 31 19:55:22 2006
@@ -24,6 +24,10 @@
bool
default y
+config SEMAPHORE_SLEEPERS
+ bool
+ default y
+
config MMU
bool
default y
@@ -58,6 +62,10 @@
default y
config GENERIC_IOMAP
+ bool
+ default y
+
+config ARCH_MAY_HAVE_PC_FDC
bool
default y
@@ -152,7 +160,6 @@
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
/dev/cpu/31/cpuid.
-# disable it for opteron optimized builds because it pulls in ACPI_BOOT
config X86_HT
bool
depends on SMP && !MK8 && !X86_64_XEN
@@ -223,34 +230,6 @@
If you don't know what to do here, say N.
-config PREEMPT
- bool "Preemptible Kernel"
- depends on !X86_64_XEN
- ---help---
- This option reduces the latency of the kernel when reacting to
- real-time or interactive events by allowing a low priority process to
- be preempted even if it is in kernel mode executing a system call.
- This allows applications to run more reliably even when the system is
- under load. On contrary it may also break your drivers and add
- priority inheritance problems to your system. Don't select it if
- you rely on a stable system or have slightly obscure hardware.
- It's also not very well tested on x86-64 currently.
- You have been warned.
-
- Say Y here if you are feeling brave and building a kernel for a
- desktop, embedded or real-time system. Say N if you are unsure.
-
-config PREEMPT_BKL
- bool "Preempt The Big Kernel Lock"
- depends on PREEMPT
- default y
- help
- This option reduces the latency of the kernel by making the
- big kernel lock preemptible.
-
- Say Y here if you are building a kernel for a desktop system.
- Say N if you are unsure.
-
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on SMP && !X86_64_XEN
@@ -260,6 +239,8 @@
when dealing with Intel Pentium 4 chips with HyperThreading at a
cost of slightly increased overhead in some places. If unsure say
N here.
+
+source "kernel/Kconfig.preempt"
config K8_NUMA
bool "K8 NUMA support"
@@ -282,7 +263,7 @@
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
-config DISCONTIGMEM
+config ARCH_DISCONTIGMEM_ENABLE
bool
depends on NUMA
default y
@@ -291,10 +272,26 @@
bool
default n
-config HAVE_DEC_LOCK
- bool
- depends on SMP
- default y
+config ARCH_DISCONTIGMEM_ENABLE
+ def_bool y
+ depends on NUMA
+
+config ARCH_DISCONTIGMEM_DEFAULT
+ def_bool y
+ depends on NUMA
+
+config ARCH_SPARSEMEM_ENABLE
+ def_bool y
+ depends on NUMA
+
+config ARCH_FLATMEM_ENABLE
+ def_bool y
+ depends on !NUMA
+
+source "mm/Kconfig"
+
+config HAVE_ARCH_EARLY_PFN_TO_NID
+ def_bool y
config NR_CPUS
int "Maximum number of CPUs (2-256)"
@@ -310,6 +307,15 @@
This is purely to save memory - each supported CPU requires
memory in the static kernel configuration.
+config HOTPLUG_CPU
+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
+ depends on SMP && HOTPLUG && EXPERIMENTAL
+ help
+ Say Y here to experiment with turning CPUs off and on. CPUs
+ can be controlled through /sys/devices/system/cpu/cpu#.
+ Say N if you want to disable CPU hotplug.
+
+
config HPET_TIMER
bool
depends on !X86_64_XEN
@@ -320,7 +326,7 @@
present. The HPET provides a stable time base on SMP
systems, unlike the TSC, but it is more expensive to access,
as it is off-chip. You can find the HPET spec at
- <http://www.intel.com/labs/platcomp/hpet/hpetspec.htm>.
+ <http://www.intel.com/hardwaredesign/hpetspec.htm>.
config X86_PM_TIMER
bool "PM timer"
@@ -343,12 +349,15 @@
config GART_IOMMU
bool "IOMMU support"
+ default y
depends on PCI && !X86_64_XEN
help
- Support the K8 IOMMU. Needed to run systems with more than 4GB of
memory
+ Support the IOMMU. Needed to run systems with more than 3GB of memory
properly with 32-bit PCI devices that do not support DAC (Double
Address
Cycle). The IOMMU can be turned off at runtime with the iommu=off
parameter.
Normally the kernel will take the right choice by itself.
+ This option includes a driver for the AMD Opteron/Athlon64 IOMMU
+ and a software emulation used on some other systems.
If unsure, say Y.
# need this always enabled with GART_IOMMU for the VIA workaround
@@ -383,6 +392,34 @@
help
Additional support for intel specific MCE features such as
the thermal monitor.
+
+config PHYSICAL_START
+ hex "Physical address where the kernel is loaded" if EMBEDDED
+ default "0x100000"
+ help
+ This gives the physical address where the kernel is loaded.
+ Primarily used in the case of kexec on panic where the
+ fail safe kernel needs to run at a different address than
+ the panic-ed kernel.
+
+ Don't change this unless you know what you are doing.
+
+config KEXEC
+ bool "kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && !X86_64_XEN
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
@@ -401,6 +438,8 @@
If unsure, say Y. Only embedded should say N here.
+source kernel/Kconfig.hz
+
endmenu
#
@@ -417,6 +456,11 @@
# we have no ISA slots, but we do have ISA-style DMA.
config ISA_DMA_API
bool
+ default y
+
+config GENERIC_PENDING_IRQ
+ bool
+ depends on GENERIC_HARDIRQS && SMP
default y
menu "Power management options"
@@ -448,7 +492,6 @@
config PCI_MMCONFIG
bool "Support mmconfig PCI config space access"
depends on PCI && ACPI
- select ACPI_BOOT
config UNORDERED_IO
bool "Unordered IO mapping access"
@@ -507,6 +550,8 @@
endmenu
+source "net/Kconfig"
+
source drivers/Kconfig
source "drivers/firmware/Kconfig"
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/arch/x86_64/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/Makefile Tue Jan 31 19:55:22 2006
@@ -21,21 +21,9 @@
#
# $Id: Makefile,v 1.31 2002/03/22 15:56:07 ak Exp $
-#
-# early bootup linking needs 32bit. You can either use real 32bit tools
-# here or 64bit tools in 32bit mode.
-#
-IA32_CC := $(CC) $(CPPFLAGS) -m32 -O2 -fomit-frame-pointer
-IA32_LD := $(LD) -m elf_i386
-IA32_AS := $(CC) $(AFLAGS) -m32 -Wa,--32 -traditional -c
-IA32_OBJCOPY := $(CROSS_COMPILE)objcopy
-IA32_CPP := $(CROSS_COMPILE)gcc -m32 -E
-export IA32_CC IA32_LD IA32_AS IA32_OBJCOPY IA32_CPP
-
-
LDFLAGS := -m elf_x86_64
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-LDFLAGS_vmlinux := -e stext
+LDFLAGS_vmlinux :=
CHECKFLAGS += -D__x86_64__ -m64
@@ -65,7 +53,9 @@
head-y := arch/x86_64/kernel/head.o arch/x86_64/kernel/head64.o
arch/x86_64/kernel/init_task.o
libs-y += arch/x86_64/lib/
-core-y += arch/x86_64/kernel/ arch/x86_64/mm/
+core-y += arch/x86_64/kernel/ \
+ arch/x86_64/mm/ \
+ arch/x86_64/crypto/
core-$(CONFIG_IA32_EMULATION) += arch/x86_64/ia32/
drivers-$(CONFIG_PCI) += arch/x86_64/pci/
drivers-$(CONFIG_OPROFILE) += arch/x86_64/oprofile/
@@ -112,16 +102,6 @@
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-prepare: include/asm-$(ARCH)/offset.h
-
-arch/$(ARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
- include/config/MARKER
-
-include/asm-$(ARCH)/offset.h: arch/$(ARCH)/kernel/asm-offsets.s
- $(call filechk,gen-asm-offsets)
-
-CLEAN_FILES += include/asm-$(ARCH)/offset.h
-
define archhelp
echo '* bzImage - Compressed kernel image (arch/$(ARCH)/boot/bzImage)'
echo ' install - Install kernel using'
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/ia32/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/Makefile Tue Jan 31 19:55:22 2006
@@ -4,14 +4,14 @@
obj-$(CONFIG_IA32_EMULATION) := ia32entry.o sys_ia32.o ia32_ioctl.o \
ia32_signal.o tls32.o \
- ia32_binfmt.o fpu32.o ptrace32.o syscall32.o
+ ia32_binfmt.o fpu32.o ptrace32.o syscall32.o syscall32_syscall.o
sysv-$(CONFIG_SYSVIPC) := ipc32.o
obj-$(CONFIG_IA32_EMULATION) += $(sysv-y)
obj-$(CONFIG_IA32_AOUT) += ia32_aout.o
-$(obj)/syscall32.o: $(src)/syscall32.c \
+$(obj)/syscall32_syscall.o: \
$(foreach F,sysenter syscall,$(obj)/vsyscall-$F.so)
# Teach kbuild about targets
@@ -28,14 +28,14 @@
$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE
$(call if_changed,syscall)
-AFLAGS_vsyscall-sysenter.o = -m32
-AFLAGS_vsyscall-syscall.o = -m32
+AFLAGS_vsyscall-sysenter.o = -m32 -Iarch/i386/kernel
+AFLAGS_vsyscall-syscall.o = -m32 -Iarch/i386/kernel
CFLAGS_ia32_ioctl.o += -Ifs/
ifdef CONFIG_XEN
AFLAGS_vsyscall-int80.o = -m32 -Iarch/i386/kernel
-$(obj)/syscall32-xen.o: $(src)/syscall32-xen.c \
+$(obj)/syscall32_syscall-xen.o: \
$(foreach F,int80 sysenter syscall,$(obj)/vsyscall-$F.so)
targets := $(foreach F,int80 sysenter syscall,vsyscall-$F.o vsyscall-$F.so)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/ia32entry-xen.S
--- a/linux-2.6-xen-sparse/arch/x86_64/ia32/ia32entry-xen.S Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/ia32entry-xen.S Tue Jan 31
19:55:22 2006
@@ -6,7 +6,7 @@
#include <asm/dwarf2.h>
#include <asm/calling.h>
-#include <asm/offset.h>
+#include <asm/asm-offsets.h>
#include <asm/current.h>
#include <asm/errno.h>
#include <asm/ia32_unistd.h>
@@ -72,7 +72,9 @@
* with the int 0x80 path.
*/
ENTRY(ia32_sysenter_target)
- CFI_STARTPROC
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,0
+ CFI_REGISTER rsp,rbp
__swapgs
movq %gs:pda_kernelstack, %rsp
addq $(PDA_STACKOFFSET),%rsp
@@ -80,13 +82,25 @@
__sti
movl %ebp,%ebp /* zero extension */
pushq $__USER32_DS
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET ss,0*/
pushq %rbp
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rsp,0
pushfq
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET rflags,0*/
movl $VSYSCALL32_SYSEXIT, %r10d
+ CFI_REGISTER rip,r10
pushq $__USER32_CS
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET cs,0*/
movl %eax, %eax
pushq %r10
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rip,0
pushq %rax
+ CFI_ADJUST_CFA_OFFSET 8
cld
SAVE_ARGS 0,0,1
/* no need to do an access_ok check here because rbp has been
@@ -97,6 +111,7 @@
.previous
GET_THREAD_INFO(%r10)
testl
$(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ CFI_REMEMBER_STATE
jnz sysenter_tracesys
sysenter_do_call:
cmpl $(IA32_NR_syscalls),%eax
@@ -113,8 +128,13 @@
andl $~0x200,EFLAGS-R11(%rsp)
RESTORE_ARGS 1,24,1,1,1,1
popfq
+ CFI_ADJUST_CFA_OFFSET -8
+ /*CFI_RESTORE rflags*/
popq %rcx /* User %esp */
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rsp,rcx
movl $VSYSCALL32_SYSEXIT,%edx /* User %eip */
+ CFI_REGISTER rip,rdx
__swapgs
XEN_UNBLOCK_EVENTS(%r11)
__sti /* sti only takes effect after the next instruction */
@@ -122,6 +142,7 @@
.byte 0xf, 0x35 /* TBD */
sysenter_tracesys:
+ CFI_RESTORE_STATE
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp) /* really needed? */
@@ -160,9 +181,13 @@
* with the int 0x80 path.
*/
ENTRY(ia32_cstar_target)
- CFI_STARTPROC
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,0
+ CFI_REGISTER rip,rcx
+ /*CFI_REGISTER rflags,r11*/
__swapgs
movl %esp,%r8d
+ CFI_REGISTER rsp,r8
movq %gs:pda_kernelstack,%rsp
XEN_UNBLOCK_EVENTS(%r11)
__sti
@@ -170,12 +195,15 @@
movl %eax,%eax /* zero extension */
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
+ CFI_REL_OFFSET rip,RIP-ARGOFFSET
movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
movq $__USER32_CS,CS-ARGOFFSET(%rsp)
movq $__USER32_DS,SS-ARGOFFSET(%rsp)
movq %r11,EFLAGS-ARGOFFSET(%rsp)
+ /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
movq %r8,RSP-ARGOFFSET(%rsp)
+ CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
@@ -185,6 +213,7 @@
.previous
GET_THREAD_INFO(%r10)
testl
$(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ CFI_REMEMBER_STATE
jnz cstar_tracesys
cstar_do_call:
cmpl $IA32_NR_syscalls,%eax
@@ -199,12 +228,16 @@
jnz int_ret_from_sys_call
RESTORE_ARGS 1,-ARG_SKIP,1,1,1
movl RIP-ARGOFFSET(%rsp),%ecx
+ CFI_REGISTER rip,rcx
movl EFLAGS-ARGOFFSET(%rsp),%r11d
+ /*CFI_REGISTER rflags,r11*/
movl RSP-ARGOFFSET(%rsp),%esp
+ CFI_RESTORE rsp
__swapgs
sysretl /* TBD */
cstar_tracesys:
+ CFI_RESTORE_STATE
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp) /* really needed? */
@@ -248,7 +281,13 @@
*/
ENTRY(ia32_syscall)
- CFI_STARTPROC
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,SS+8-RIP
+ /*CFI_REL_OFFSET ss,SS-RIP*/
+ CFI_REL_OFFSET rsp,RSP-RIP
+ /*CFI_REL_OFFSET rflags,EFLAGS-RIP*/
+ /*CFI_REL_OFFSET cs,CS-RIP*/
+ CFI_REL_OFFSET rip,RIP-RIP
__swapgs
XEN_UNBLOCK_EVENTS(%r11)
__sti
@@ -257,6 +296,7 @@
addq $0x10,%rsp /* skip rcx and r11 */
movl %eax,%eax
pushq %rax
+ CFI_ADJUST_CFA_OFFSET 8
cld
/* 1: jmp 1b */
/* note the registers are not zero extended to the sf.
@@ -305,6 +345,8 @@
jmp ia32_ptregs_common
.endm
+ CFI_STARTPROC
+
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx
@@ -317,8 +359,9 @@
PTREGSCALL stub32_rt_sigsuspend, sys_rt_sigsuspend, %rdx
ENTRY(ia32_ptregs_common)
- CFI_STARTPROC
popq %r11
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rip, r11
SAVE_REST
call *%rax
RESTORE_REST
@@ -334,7 +377,7 @@
.quad stub32_fork
.quad sys_read
.quad sys_write
- .quad sys32_open /* 5 */
+ .quad compat_sys_open /* 5 */
.quad sys_close
.quad sys32_waitpid
.quad sys_creat
@@ -616,13 +659,17 @@
.quad compat_sys_mq_timedreceive /* 280 */
.quad compat_sys_mq_notify
.quad compat_sys_mq_getsetattr
- .quad quiet_ni_syscall /* reserved for kexec */
+ .quad compat_sys_kexec_load /* reserved for kexec */
.quad compat_sys_waitid
- .quad quiet_ni_syscall /* sys_altroot */
+ .quad quiet_ni_syscall /* 285: sys_altroot */
.quad sys_add_key
.quad sys_request_key
.quad sys_keyctl
- /* don't forget to change IA32_NR_syscalls */
+ .quad sys_ioprio_set
+ .quad sys_ioprio_get /* 290 */
+ .quad sys_inotify_init
+ .quad sys_inotify_add_watch
+ .quad sys_inotify_rm_watch
ia32_syscall_end:
.rept IA32_NR_syscalls-(ia32_syscall_end-ia32_sys_call_table)/8
.quad ni_syscall
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/syscall32-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/ia32/syscall32-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/syscall32-xen.c Tue Jan 31
19:55:22 2006
@@ -14,42 +14,17 @@
#include <asm/tlbflush.h>
#include <asm/ia32_unistd.h>
-#define USE_INT80
-
#ifdef USE_INT80
-/* 32bit VDSOs mapped into user space. */
-asm(".section \".init.data\",\"aw\"\n"
- "syscall32_int80:\n"
- ".incbin \"arch/x86_64/ia32/vsyscall-int80.so\"\n"
- "syscall32_int80_end:\n"
- "syscall32_syscall:\n"
- ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n"
- "syscall32_syscall_end:\n"
- "syscall32_sysenter:\n"
- ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n"
- "syscall32_sysenter_end:\n"
- ".previous");
-
extern unsigned char syscall32_int80[], syscall32_int80_end[];
-#else
-/* 32bit VDSOs mapped into user space. */
-asm(".section \".init.data\",\"aw\"\n"
- "syscall32_syscall:\n"
- ".incbin \"arch/x86_64/ia32/vsyscall-syscall.so\"\n"
- "syscall32_syscall_end:\n"
- "syscall32_sysenter:\n"
- ".incbin \"arch/x86_64/ia32/vsyscall-sysenter.so\"\n"
- "syscall32_sysenter_end:\n"
- ".previous");
-
-static int use_sysenter = -1;
#endif
-
extern unsigned char syscall32_syscall[], syscall32_syscall_end[];
extern unsigned char syscall32_sysenter[], syscall32_sysenter_end[];
extern int sysctl_vsyscall32;
char *syscall32_page;
+#ifndef USE_INT80
+static int use_sysenter = -1;
+#endif
static struct page *
syscall32_nopage(struct vm_area_struct *vma, unsigned long adr, int *type)
@@ -77,28 +52,29 @@
int npages = (VSYSCALL32_END - VSYSCALL32_BASE) >> PAGE_SHIFT;
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
+ int ret;
vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
if (!vma)
return -ENOMEM;
- if (security_vm_enough_memory(npages)) {
- kmem_cache_free(vm_area_cachep, vma);
- return -ENOMEM;
- }
memset(vma, 0, sizeof(struct vm_area_struct));
/* Could randomize here */
vma->vm_start = VSYSCALL32_BASE;
vma->vm_end = VSYSCALL32_END;
/* MAYWRITE to allow gdb to COW and set breakpoints */
- vma->vm_flags =
VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYEXEC|VM_MAYWRITE;
+ vma->vm_flags = VM_READ|VM_EXEC|VM_MAYREAD|VM_MAYEXEC|VM_MAYWRITE;
vma->vm_flags |= mm->def_flags;
vma->vm_page_prot = protection_map[vma->vm_flags & 7];
vma->vm_ops = &syscall32_vm_ops;
vma->vm_mm = mm;
down_write(&mm->mmap_sem);
- insert_vm_struct(mm, vma);
+ if ((ret = insert_vm_struct(mm, vma))) {
+ up_write(&mm->mmap_sem);
+ kmem_cache_free(vm_area_cachep, vma);
+ return ret;
+ }
mm->total_vm += npages;
up_write(&mm->mmap_sem);
return 0;
@@ -117,7 +93,6 @@
memcpy(syscall32_page, syscall32_int80,
syscall32_int80_end - syscall32_int80);
#else
-
if (use_sysenter > 0) {
memcpy(syscall32_page, syscall32_sysenter,
syscall32_sysenter_end - syscall32_sysenter);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-int80.S
--- a/linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-int80.S Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-int80.S Tue Jan 31
19:55:22 2006
@@ -7,7 +7,7 @@
* for details.
*/
#include <asm/ia32_unistd.h>
-#include <asm/offset.h>
+#include <asm/asm-offsets.h>
.text
.section .text.vsyscall,"ax"
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/Makefile Tue Jan 31 19:55:22 2006
@@ -4,15 +4,15 @@
extra-y := head.o head64.o init_task.o vmlinux.lds
EXTRA_AFLAGS := -traditional
-obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
+obj-y := process.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_x86_64.o \
x8664_ksyms.o i387.o syscall.o vsyscall.o \
- setup64.o bootflag.o e820.o reboot.o quirks.o
+ setup64.o bootflag.o e820.o reboot.o quirks.o i8237.o
obj-$(CONFIG_X86_MCE) += mce.o
obj-$(CONFIG_X86_MCE_INTEL) += mce_intel.o
obj-$(CONFIG_MTRR) += ../../i386/kernel/cpu/mtrr/
-obj-$(CONFIG_ACPI_BOOT) += acpi/
+obj-$(CONFIG_ACPI) += acpi/
obj-$(CONFIG_X86_MSR) += msr.o
obj-$(CONFIG_MICROCODE) += microcode.o
obj-$(CONFIG_X86_CPUID) += cpuid.o
@@ -21,6 +21,7 @@
obj-$(CONFIG_X86_XEN_GENAPIC) += genapic.o genapic_xen.o
obj-$(CONFIG_X86_IO_APIC) += io_apic.o mpparse.o \
genapic.o genapic_cluster.o genapic_flat.o
+obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o crash.o
obj-$(CONFIG_PM) += suspend.o
obj-$(CONFIG_SOFTWARE_SUSPEND) += suspend_asm.o
obj-$(CONFIG_CPU_FREQ) += cpufreq/
@@ -45,6 +46,8 @@
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
quirks-y += ../../i386/kernel/quirks.o
+i8237-y += ../../i386/kernel/i8237.o
+msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o
ifdef CONFIG_XEN
time-y += ../../i386/kernel/time-xen.o
@@ -53,7 +56,7 @@
microcode-$(subst m,y,$(CONFIG_MICROCODE)) :=
../../i386/kernel/microcode-xen.o
quirks-y := ../../i386/kernel/quirks-xen.o
-n-obj-xen := i8259.o reboot.o smpboot.o trampoline.o
+n-obj-xen := i8259.o reboot.o i8237.o smpboot.o trampoline.o
include $(srctree)/scripts/Makefile.xen
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/acpi/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/acpi/Makefile Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/acpi/Makefile Tue Jan 31
19:55:22 2006
@@ -1,5 +1,5 @@
-obj-$(CONFIG_ACPI_BOOT) := boot.o
-boot-$(CONFIG_ACPI_BOOT) := ../../../i386/kernel/acpi/boot.o
+obj-y := boot.o
+boot-y := ../../../i386/kernel/acpi/boot.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
boot-$(CONFIG_XEN) := ../../../i386/kernel/acpi/boot-xen.o
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/apic-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/apic-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/apic-xen.c Tue Jan 31
19:55:22 2006
@@ -18,7 +18,6 @@
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/e820-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/e820-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/e820-xen.c Tue Jan 31
19:55:22 2006
@@ -16,6 +16,9 @@
#include <linux/bootmem.h>
#include <linux/ioport.h>
#include <linux/string.h>
+#include <linux/kexec.h>
+#include <linux/module.h>
+
#include <asm/page.h>
#include <asm/e820.h>
#include <asm/proto.h>
@@ -28,6 +31,7 @@
* PFN of last memory page.
*/
unsigned long end_pfn;
+EXPORT_SYMBOL(end_pfn);
unsigned long end_user_pfn = MAXMEM>>PAGE_SHIFT;
unsigned long end_pfn_map;
@@ -106,7 +110,7 @@
struct e820entry *ei = &e820.map[i];
if (type && ei->type != type)
continue;
- if (ei->addr >= end || ei->addr + ei->size < start)
+ if (ei->addr >= end || ei->addr + ei->size <= start)
continue;
return 1;
}
@@ -152,7 +156,7 @@
if (ei->type != E820_RAM ||
ei->addr+ei->size <= start ||
- ei->addr > end)
+ ei->addr >= end)
continue;
addr = round_up(ei->addr, PAGE_SIZE);
@@ -206,6 +210,40 @@
}
/*
+ * Compute how much memory is missing in a range.
+ * Unlike the other functions in this file the arguments are in page numbers.
+ */
+unsigned long __init
+e820_hole_size(unsigned long start_pfn, unsigned long end_pfn)
+{
+ unsigned long ram = 0;
+ unsigned long start = start_pfn << PAGE_SHIFT;
+ unsigned long end = end_pfn << PAGE_SHIFT;
+ int i;
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *ei = &e820.map[i];
+ unsigned long last, addr;
+
+ if (ei->type != E820_RAM ||
+ ei->addr+ei->size <= start ||
+ ei->addr >= end)
+ continue;
+
+ addr = round_up(ei->addr, PAGE_SIZE);
+ if (addr < start)
+ addr = start;
+
+ last = round_down(ei->addr + ei->size, PAGE_SIZE);
+ if (last >= end)
+ last = end;
+
+ if (last > addr)
+ ram += last - addr;
+ }
+ return ((end - start) - ram) >> PAGE_SHIFT;
+}
+
+/*
* Mark e820 reserved areas as busy for the resource manager.
*/
void __init e820_reserve_resources(void)
@@ -213,8 +251,6 @@
int i;
for (i = 0; i < e820.nr_map; i++) {
struct resource *res;
- if (e820.map[i].addr + e820.map[i].size > 0x100000000ULL)
- continue;
res = alloc_bootmem_low(sizeof(struct resource));
switch (e820.map[i].type) {
case E820_RAM: res->name = "System RAM"; break;
@@ -234,6 +270,9 @@
*/
request_resource(res, &code_resource);
request_resource(res, &data_resource);
+#ifdef CONFIG_KEXEC
+ request_resource(res, &crashk_res);
+#endif
}
}
}
@@ -541,11 +580,17 @@
return max_end_pfn;
}
+unsigned long __init
+e820_hole_size(unsigned long start_pfn, unsigned long end_pfn)
+{
+ return 0;
+}
+
void __init e820_reserve_resources(void)
{
dom0_op_t op;
struct dom0_memory_map_entry *map;
- unsigned long gapstart, gapsize, last;
+ unsigned long gapstart, gapsize, round, last;
int i, found = 0;
if (!(xen_start_info->flags & SIF_INITDOMAIN))
@@ -588,6 +633,74 @@
if (!found) {
gapstart = HYPERVISOR_memory_op(XENMEM_maximum_ram_page, NULL);
gapstart = (gapstart << PAGE_SHIFT) + 1024*1024;
+ printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit
address range\n"
+ KERN_ERR "PCI: Unassigned devices with 32bit resource
registers may break!\n");
+ }
+
+ /*
+ * See how much we want to round up: start off with
+ * rounding to the next 1MB area.
+ */
+ round = 0x100000;
+ while ((gapsize >> 4) > round)
+ round += round;
+ /* Fun with two's complement */
+ pci_mem_start = (gapstart + round) & -round;
+
+ printk(KERN_INFO "Allocating PCI resources starting at %lx (gap:
%lx:%lx)\n",
+ pci_mem_start, gapstart, gapsize);
+}
+
+#endif
+
+void __init parse_memopt(char *p, char **from)
+{
+ end_user_pfn = memparse(p, from);
+ end_user_pfn >>= PAGE_SHIFT;
+ xen_override_max_pfn = (unsigned long) end_user_pfn;
+}
+
+/*
+ * Search for the biggest gap in the low 32 bits of the e820
+ * memory space. We pass this space to PCI to assign MMIO resources
+ * for hotplug or unconfigured devices in.
+ * Hopefully the BIOS let enough space left.
+ */
+__init void e820_setup_gap(void)
+{
+#ifndef CONFIG_XEN
+ unsigned long gapstart, gapsize;
+ unsigned long last;
+ int i;
+ int found = 0;
+
+ last = 0x100000000ull;
+ gapstart = 0x10000000;
+ gapsize = 0x400000;
+ i = e820.nr_map;
+ while (--i >= 0) {
+ unsigned long long start = e820.map[i].addr;
+ unsigned long long end = start + e820.map[i].size;
+
+ /*
+ * Since "last" is at most 4GB, we know we'll
+ * fit in 32 bits if this condition is true
+ */
+ if (last > end) {
+ unsigned long gap = last - end;
+
+ if (gap > gapsize) {
+ gapsize = gap;
+ gapstart = end;
+ found = 1;
+ }
+ }
+ if (start < last)
+ last = start;
+ }
+
+ if (!found) {
+ gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit
address range\n"
KERN_ERR "PCI: Unassigned devices with 32bit resource
registers may break!\n");
}
@@ -604,73 +717,5 @@
printk(KERN_INFO "Allocating PCI resources starting at %lx (gap:
%lx:%lx)\n",
pci_mem_start, gapstart, gapsize);
-}
-
#endif
-
-void __init parse_memopt(char *p, char **from)
-{
- end_user_pfn = memparse(p, from);
- end_user_pfn >>= PAGE_SHIFT;
- xen_override_max_pfn = (unsigned long) end_user_pfn;
-}
-
-/*
- * Search for the biggest gap in the low 32 bits of the e820
- * memory space. We pass this space to PCI to assign MMIO resources
- * for hotplug or unconfigured devices in.
- * Hopefully the BIOS let enough space left.
- */
-__init void e820_setup_gap(void)
-{
-#ifndef CONFIG_XEN
- unsigned long gapstart, gapsize;
- unsigned long last;
- int i;
- int found = 0;
-
- last = 0x100000000ull;
- gapstart = 0x10000000;
- gapsize = 0x400000;
- i = e820.nr_map;
- while (--i >= 0) {
- unsigned long long start = e820.map[i].addr;
- unsigned long long end = start + e820.map[i].size;
-
- /*
- * Since "last" is at most 4GB, we know we'll
- * fit in 32 bits if this condition is true
- */
- if (last > end) {
- unsigned long gap = last - end;
-
- if (gap > gapsize) {
- gapsize = gap;
- gapstart = end;
- found = 1;
- }
- }
- if (start < last)
- last = start;
- }
-
- if (!found) {
- gapstart = (end_pfn << PAGE_SHIFT) + 1024*1024;
- printk(KERN_ERR "PCI: Warning: Cannot find a gap in the 32bit
address range\n"
- KERN_ERR "PCI: Unassigned devices with 32bit resource
registers may break!\n");
- }
-
- /*
- * Start allocating dynamic PCI memory a bit into the gap,
- * aligned up to the nearest megabyte.
- *
- * Question: should we try to pad it up a bit (do something
- * like " + (gapsize >> 3)" in there too?). We now have the
- * technology.
- */
- pci_mem_start = (gapstart + 0xfffff) & ~0xfffff;
-
- printk(KERN_INFO "Allocating PCI resources starting at %lx (gap:
%lx:%lx)\n",
- pci_mem_start, gapstart, gapsize);
-#endif
-}
+}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/early_printk-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/early_printk-xen.c Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/early_printk-xen.c Tue Jan
31 19:55:22 2006
@@ -3,22 +3,27 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/tty.h>
#include <asm/io.h>
#include <asm/processor.h>
-
-#ifndef CONFIG_XEN
+#include <asm/fcntl.h>
/* Simple VGA output */
#ifdef __i386__
+#include <asm/setup.h>
#define VGABASE (__ISA_IO_base + 0xb8000)
#else
+#include <asm/bootsetup.h>
#define VGABASE ((void __iomem *)0xffffffff800b8000UL)
#endif
-#define MAX_YPOS 25
-#define MAX_XPOS 80
-
+#define MAX_YPOS max_ypos
+#define MAX_XPOS max_xpos
+
+static int max_ypos = 25, max_xpos = 80;
+
+#ifndef CONFIG_XEN
static int current_ypos = 1, current_xpos = 0;
static void early_vga_write(struct console *con, const char *str, unsigned n)
@@ -152,6 +157,10 @@
#else /* CONFIG_XEN */
+#undef SCREEN_INFO
+#define SCREEN_INFO screen_info
+extern struct screen_info screen_info;
+
static void
early_serial_write(struct console *con, const char *s, unsigned count)
{
@@ -185,6 +194,47 @@
.index = -1,
};
+/* Console interface to a host file on AMD's SimNow! */
+
+static int simnow_fd;
+
+enum {
+ MAGIC1 = 0xBACCD00A,
+ MAGIC2 = 0xCA110000,
+ XOPEN = 5,
+ XWRITE = 4,
+};
+
+static noinline long simnow(long cmd, long a, long b, long c)
+{
+ long ret;
+ asm volatile("cpuid" :
+ "=a" (ret) :
+ "b" (a), "c" (b), "d" (c), "0" (MAGIC1), "D" (cmd +
MAGIC2));
+ return ret;
+}
+
+void __init simnow_init(char *str)
+{
+ char *fn = "klog";
+ if (*str == '=')
+ fn = ++str;
+ /* error ignored */
+ simnow_fd = simnow(XOPEN, (unsigned long)fn, O_WRONLY|O_APPEND|O_CREAT,
0644);
+}
+
+static void simnow_write(struct console *con, const char *s, unsigned n)
+{
+ simnow(XWRITE, simnow_fd, (unsigned long)s, n);
+}
+
+static struct console simnow_console = {
+ .name = "simnow",
+ .write = simnow_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
/* Direct interface for emergencies */
struct console *early_console = &early_vga_console;
static int early_console_initialized = 0;
@@ -227,8 +277,15 @@
} else if (!strncmp(buf, "ttyS", 4)) {
early_serial_init(buf);
early_console = &early_serial_console;
- } else if (!strncmp(buf, "vga", 3)) {
+ } else if (!strncmp(buf, "vga", 3)
+ && SCREEN_INFO.orig_video_isVGA == 1) {
+ max_xpos = SCREEN_INFO.orig_video_cols;
+ max_ypos = SCREEN_INFO.orig_video_lines;
early_console = &early_vga_console;
+ } else if (!strncmp(buf, "simnow", 6)) {
+ simnow_init(buf + 6);
+ early_console = &simnow_console;
+ keep_early = 1;
}
early_console_initialized = 1;
register_console(early_console);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/entry-xen.S
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/entry-xen.S Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/entry-xen.S Tue Jan 31
19:55:22 2006
@@ -33,6 +33,9 @@
#define ASSEMBLY 1
#include <linux/config.h>
+#ifdef CONFIG_DEBUG_INFO
+#undef CONFIG_DEBUG_INFO
+#endif
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/smp.h>
@@ -40,7 +43,7 @@
#include <asm/errno.h>
#include <asm/dwarf2.h>
#include <asm/calling.h>
-#include <asm/offset.h>
+#include <asm/asm-offsets.h>
#include <asm/msr.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
@@ -77,19 +80,22 @@
.macro FAKE_STACK_FRAME child_rip
/* push in order ss, rsp, eflags, cs, rip */
- xorq %rax, %rax
+ xorl %eax, %eax
pushq %rax /* ss */
CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET ss,0*/
pushq %rax /* rsp */
CFI_ADJUST_CFA_OFFSET 8
- CFI_OFFSET rip,0
+ CFI_REL_OFFSET rsp,0
pushq $(1<<9) /* eflags - interrupts on */
CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET rflags,0*/
pushq $__KERNEL_CS /* cs */
CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET cs,0*/
pushq \child_rip /* rip */
CFI_ADJUST_CFA_OFFSET 8
- CFI_OFFSET rip,0
+ CFI_REL_OFFSET rip,0
pushq %rax /* orig rax */
CFI_ADJUST_CFA_OFFSET 8
.endm
@@ -99,25 +105,33 @@
CFI_ADJUST_CFA_OFFSET -(6*8)
.endm
- .macro CFI_DEFAULT_STACK
- CFI_ADJUST_CFA_OFFSET (SS)
- CFI_OFFSET r15,R15-SS
- CFI_OFFSET r14,R14-SS
- CFI_OFFSET r13,R13-SS
- CFI_OFFSET r12,R12-SS
- CFI_OFFSET rbp,RBP-SS
- CFI_OFFSET rbx,RBX-SS
- CFI_OFFSET r11,R11-SS
- CFI_OFFSET r10,R10-SS
- CFI_OFFSET r9,R9-SS
- CFI_OFFSET r8,R8-SS
- CFI_OFFSET rax,RAX-SS
- CFI_OFFSET rcx,RCX-SS
- CFI_OFFSET rdx,RDX-SS
- CFI_OFFSET rsi,RSI-SS
- CFI_OFFSET rdi,RDI-SS
- CFI_OFFSET rsp,RSP-SS
- CFI_OFFSET rip,RIP-SS
+ .macro CFI_DEFAULT_STACK start=1
+ .if \start
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,SS+8
+ .else
+ CFI_DEF_CFA_OFFSET SS+8
+ .endif
+ CFI_REL_OFFSET r15,R15
+ CFI_REL_OFFSET r14,R14
+ CFI_REL_OFFSET r13,R13
+ CFI_REL_OFFSET r12,R12
+ CFI_REL_OFFSET rbp,RBP
+ CFI_REL_OFFSET rbx,RBX
+ CFI_REL_OFFSET r11,R11
+ CFI_REL_OFFSET r10,R10
+ CFI_REL_OFFSET r9,R9
+ CFI_REL_OFFSET r8,R8
+ CFI_REL_OFFSET rax,RAX
+ CFI_REL_OFFSET rcx,RCX
+ CFI_REL_OFFSET rdx,RDX
+ CFI_REL_OFFSET rsi,RSI
+ CFI_REL_OFFSET rdi,RDI
+ CFI_REL_OFFSET rip,RIP
+ /*CFI_REL_OFFSET cs,CS*/
+ /*CFI_REL_OFFSET rflags,EFLAGS*/
+ CFI_REL_OFFSET rsp,RSP
+ /*CFI_REL_OFFSET ss,SS*/
.endm
/*
@@ -143,7 +157,6 @@
*/
/* rdi: prev */
ENTRY(ret_from_fork)
- CFI_STARTPROC
CFI_DEFAULT_STACK
call schedule_tail
GET_THREAD_INFO(%rcx)
@@ -192,12 +205,16 @@
*/
ENTRY(system_call)
- CFI_STARTPROC
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,0
+ CFI_REGISTER rip,rcx
+ /*CFI_REGISTER rflags,r11*/
SAVE_ARGS -8,0
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
XEN_UNBLOCK_EVENTS(%r11)
GET_THREAD_INFO(%rcx)
testl
$(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ CFI_REMEMBER_STATE
jnz tracesys
cmpq $__NR_syscall_max,%rax
ja badsys
@@ -217,20 +234,26 @@
XEN_BLOCK_EVENTS(%rsi)
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
+ CFI_REMEMBER_STATE
jnz sysret_careful
XEN_UNBLOCK_EVENTS(%rsi)
+ CFI_REGISTER rip,rcx
RESTORE_ARGS 0,8,0
+ /*CFI_REGISTER rflags,r11*/
HYPERVISOR_IRET VGCF_IN_SYSCALL
/* Handle reschedules */
/* edx: work, edi: workmask */
sysret_careful:
+ CFI_RESTORE_STATE
bt $TIF_NEED_RESCHED,%edx
jnc sysret_signal
XEN_BLOCK_EVENTS(%rsi)
pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
jmp sysret_check
/* Handle a signal */
@@ -249,8 +272,13 @@
1: movl $_TIF_NEED_RESCHED,%edi
jmp sysret_check
+badsys:
+ movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
+ jmp ret_from_sys_call
+
/* Do syscall tracing */
tracesys:
+ CFI_RESTORE_STATE
SAVE_REST
movq $-ENOSYS,RAX(%rsp)
FIXUP_TOP_OF_STACK %rdi
@@ -269,16 +297,29 @@
RESTORE_TOP_OF_STACK %rbx
RESTORE_REST
jmp ret_from_sys_call
+ CFI_ENDPROC
-badsys:
- movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
- jmp ret_from_sys_call
-
/*
* Syscall return path ending with IRET.
* Has correct top of stack, but partial stack frame.
*/
-ENTRY(int_ret_from_sys_call)
+ENTRY(int_ret_from_sys_call)
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,SS+8-ARGOFFSET
+ /*CFI_REL_OFFSET ss,SS-ARGOFFSET*/
+ CFI_REL_OFFSET rsp,RSP-ARGOFFSET
+ /*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
+ /*CFI_REL_OFFSET cs,CS-ARGOFFSET*/
+ CFI_REL_OFFSET rip,RIP-ARGOFFSET
+ CFI_REL_OFFSET rdx,RDX-ARGOFFSET
+ CFI_REL_OFFSET rcx,RCX-ARGOFFSET
+ CFI_REL_OFFSET rax,RAX-ARGOFFSET
+ CFI_REL_OFFSET rdi,RDI-ARGOFFSET
+ CFI_REL_OFFSET rsi,RSI-ARGOFFSET
+ CFI_REL_OFFSET r8,R8-ARGOFFSET
+ CFI_REL_OFFSET r9,R9-ARGOFFSET
+ CFI_REL_OFFSET r10,R10-ARGOFFSET
+ CFI_REL_OFFSET r11,R11-ARGOFFSET
XEN_BLOCK_EVENTS(%rsi)
testb $3,CS-ARGOFFSET(%rsp)
jnz 1f
@@ -304,8 +345,10 @@
/* sti */
XEN_UNBLOCK_EVENTS(%rsi)
pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
cli
jmp int_with_check
@@ -318,9 +361,11 @@
testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
jz int_signal
pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
leaq 8(%rsp),%rdi # &ptregs -> arg1
call syscall_trace_leave
popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
cli
jmp int_restore_rest
@@ -350,6 +395,8 @@
jmp ptregscall_common
.endm
+ CFI_STARTPROC
+
PTREGSCALL stub_clone, sys_clone, %r8
PTREGSCALL stub_fork, sys_fork, %rdi
PTREGSCALL stub_vfork, sys_vfork, %rdi
@@ -358,40 +405,49 @@
PTREGSCALL stub_iopl, sys_iopl, %rsi
ENTRY(ptregscall_common)
- CFI_STARTPROC
popq %r11
- CFI_ADJUST_CFA_OFFSET -8
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rip, r11
SAVE_REST
movq %r11, %r15
+ CFI_REGISTER rip, r15
FIXUP_TOP_OF_STACK %r11
call *%rax
RESTORE_TOP_OF_STACK %r11
movq %r15, %r11
+ CFI_REGISTER rip, r11
RESTORE_REST
pushq %r11
- CFI_ADJUST_CFA_OFFSET 8
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rip, 0
ret
CFI_ENDPROC
ENTRY(stub_execve)
CFI_STARTPROC
popq %r11
- CFI_ADJUST_CFA_OFFSET -8
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rip, r11
SAVE_REST
movq %r11, %r15
+ CFI_REGISTER rip, r15
FIXUP_TOP_OF_STACK %r11
call sys_execve
GET_THREAD_INFO(%rcx)
bt $TIF_IA32,threadinfo_flags(%rcx)
+ CFI_REMEMBER_STATE
jc exec_32bit
RESTORE_TOP_OF_STACK %r11
movq %r15, %r11
+ CFI_REGISTER rip, r11
RESTORE_REST
- push %r11
+ pushq %r11
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rip, 0
ret
exec_32bit:
- CFI_ADJUST_CFA_OFFSET REST_SKIP
+ CFI_RESTORE_STATE
movq %rax,RAX(%rsp)
RESTORE_REST
jmp int_ret_from_sys_call
@@ -403,7 +459,8 @@
*/
ENTRY(stub_rt_sigreturn)
CFI_STARTPROC
- addq $8, %rsp
+ addq $8, %rsp
+ CFI_ADJUST_CFA_OFFSET -8
SAVE_REST
movq %rsp,%rdi
FIXUP_TOP_OF_STACK %r11
@@ -413,6 +470,25 @@
jmp int_ret_from_sys_call
CFI_ENDPROC
+/*
+ * initial frame state for interrupts and exceptions
+ */
+ .macro _frame ref
+ CFI_STARTPROC simple
+ CFI_DEF_CFA rsp,SS+8-\ref
+ /*CFI_REL_OFFSET ss,SS-\ref*/
+ CFI_REL_OFFSET rsp,RSP-\ref
+ /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
+ /*CFI_REL_OFFSET cs,CS-\ref*/
+ CFI_REL_OFFSET rip,RIP-\ref
+ .endm
+
+/* initial frame state for interrupts (and exceptions without error code) */
+#define INTR_FRAME _frame RIP
+/* initial frame state for exceptions with error code (and interrupts with
+ vector already pushed) */
+#define XCPT_FRAME _frame ORIG_RAX
+
/*
* Interrupt entry/exit.
*
@@ -423,10 +499,6 @@
/* 0(%rsp): interrupt number */
.macro interrupt func
- CFI_STARTPROC simple
- CFI_DEF_CFA rsp,(SS-RDI)
- CFI_REL_OFFSET rsp,(RSP-ORIG_RAX)
- CFI_REL_OFFSET rip,(RIP-ORIG_RAX)
cld
#ifdef CONFIG_DEBUG_INFO
SAVE_ALL
@@ -446,16 +518,18 @@
je 1f
swapgs
#endif
-1: addl $1,%gs:pda_irqcount # RED-PEN should check preempt count
+1: incl %gs:pda_irqcount # RED-PEN should check preempt count
movq %gs:pda_irqstackptr,%rax
- cmoveq %rax,%rsp
+ cmoveq %rax,%rsp /*todo This needs CFI annotation! */
pushq %rdi # save old stack
+ CFI_ADJUST_CFA_OFFSET 8
call \func
.endm
-retint_check:
+retint_check:
movl threadinfo_flags(%rcx),%edx
andl %edi,%edx
+ CFI_REMEMBER_STATE
jnz retint_careful
retint_restore_args:
movb EVENT_MASK-REST_SKIP(%rsp), %al
@@ -475,15 +549,18 @@
user_mode:
HYPERVISOR_IRET 0
- /* edi: workmask, edx: work */
+ /* edi: workmask, edx: work */
retint_careful:
+ CFI_RESTORE_STATE
bt $TIF_NEED_RESCHED,%edx
jnc retint_signal
XEN_UNBLOCK_EVENTS(%rsi)
/* sti */
pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
call schedule
popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
XEN_BLOCK_EVENTS(%rsi)
GET_THREAD_INFO(%rcx)
/* cli */
@@ -495,7 +572,7 @@
XEN_UNBLOCK_EVENTS(%rsi)
SAVE_REST
movq $-1,ORIG_RAX(%rsp)
- xorq %rsi,%rsi # oldset
+ xorl %esi,%esi # oldset
movq %rsp,%rdi # &pt_regs
call do_notify_resume
RESTORE_REST
@@ -524,7 +601,9 @@
* APIC interrupts.
*/
.macro apicinterrupt num,func
+ INTR_FRAME
pushq $\num-256
+ CFI_ADJUST_CFA_OFFSET 8
interrupt \func
jmp error_entry
CFI_ENDPROC
@@ -534,8 +613,19 @@
ENTRY(reschedule_interrupt)
apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
-ENTRY(invalidate_interrupt)
- apicinterrupt INVALIDATE_TLB_VECTOR,smp_invalidate_interrupt
+ .macro INVALIDATE_ENTRY num
+ENTRY(invalidate_interrupt\num)
+ apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt
+ .endm
+
+ INVALIDATE_ENTRY 0
+ INVALIDATE_ENTRY 1
+ INVALIDATE_ENTRY 2
+ INVALIDATE_ENTRY 3
+ INVALIDATE_ENTRY 4
+ INVALIDATE_ENTRY 5
+ INVALIDATE_ENTRY 6
+ INVALIDATE_ENTRY 7
ENTRY(call_function_interrupt)
apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
@@ -556,22 +646,29 @@
* Exception entry points.
*/
.macro zeroentry sym
+ INTR_FRAME
movq (%rsp),%rcx
movq 8(%rsp),%r11
addq $0x10,%rsp /* skip rcx and r11 */
pushq $0 /* push error code/oldrax */
+ CFI_ADJUST_CFA_OFFSET 8
pushq %rax /* push real oldrax to the rdi slot */
+ CFI_ADJUST_CFA_OFFSET 8
leaq \sym(%rip),%rax
jmp error_entry
+ CFI_ENDPROC
.endm
.macro errorentry sym
+ XCPT_FRAME
movq (%rsp),%rcx
movq 8(%rsp),%r11
addq $0x10,%rsp /* rsp points to the error code */
pushq %rax
+ CFI_ADJUST_CFA_OFFSET 8
leaq \sym(%rip),%rax
jmp error_entry
+ CFI_ENDPROC
.endm
#if 0
@@ -603,10 +700,7 @@
* and the exception handler in %rax.
*/
ENTRY(error_entry)
- CFI_STARTPROC simple
- CFI_DEF_CFA rsp,(SS-RDI)
- CFI_REL_OFFSET rsp,(RSP-RDI)
- CFI_REL_OFFSET rip,(RIP-RDI)
+ _frame RDI
/* rdi slot contains rax, oldrax contains error code */
cld
subq $14*8,%rsp
@@ -847,7 +941,7 @@
movq %rsi, %rdi
call *%rax
# exit
- xorq %rdi, %rdi
+ xorl %edi, %edi
call do_exit
/*
@@ -880,8 +974,9 @@
ret
CFI_ENDPROC
-ENTRY(page_fault)
+KPROBE_ENTRY(page_fault)
errorentry do_page_fault
+ .previous .text
ENTRY(coprocessor_error)
zeroentry do_coprocessor_error
@@ -893,20 +988,21 @@
zeroentry math_state_restore
/* runs on exception stack */
-ENTRY(debug)
- CFI_STARTPROC
+KPROBE_ENTRY(debug)
+ INTR_FRAME
/* pushq $0
CFI_ADJUST_CFA_OFFSET 8 */
zeroentry do_debug
/* jmp paranoid_exit */
CFI_ENDPROC
+ .previous .text
#if 0
/* runs on exception stack */
ENTRY(nmi)
- CFI_STARTPROC
+ INTR_FRAME
pushq $-1
- CFI_ADJUST_CFA_OFFSET 8
+ CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_nmi
/*
* "Paranoid" exit path from exception stack.
@@ -952,8 +1048,9 @@
CFI_ENDPROC
#endif
-ENTRY(int3)
+KPROBE_ENTRY(int3)
zeroentry do_int3
+ .previous .text
ENTRY(overflow)
zeroentry do_overflow
@@ -973,7 +1070,7 @@
#if 0
/* runs on exception stack */
ENTRY(double_fault)
- CFI_STARTPROC
+ XCPT_FRAME
paranoidentry do_double_fault
jmp paranoid_exit
CFI_ENDPROC
@@ -987,12 +1084,13 @@
/* runs on exception stack */
ENTRY(stack_segment)
- CFI_STARTPROC
+ XCPT_FRAME
errorentry do_stack_segment
CFI_ENDPROC
-ENTRY(general_protection)
+KPROBE_ENTRY(general_protection)
errorentry do_general_protection
+ .previous .text
ENTRY(alignment_check)
errorentry do_alignment_check
@@ -1006,7 +1104,7 @@
#ifdef CONFIG_X86_MCE
/* runs on exception stack */
ENTRY(machine_check)
- CFI_STARTPROC
+ INTR_FRAME
pushq $0
CFI_ADJUST_CFA_OFFSET 8
paranoidentry do_machine_check
@@ -1017,3 +1115,21 @@
ENTRY(call_debug)
zeroentry do_call_debug
+
+ENTRY(call_softirq)
+ CFI_STARTPROC
+ movq %gs:pda_irqstackptr,%rax
+ pushq %r15
+ CFI_ADJUST_CFA_OFFSET 8
+ movq %rsp,%r15
+ CFI_DEF_CFA_REGISTER r15
+ incl %gs:pda_irqcount
+ cmove %rax,%rsp
+ call __do_softirq
+ movq %r15,%rsp
+ CFI_DEF_CFA_REGISTER rsp
+ decl %gs:pda_irqcount
+ popq %r15
+ CFI_ADJUST_CFA_OFFSET -8
+ ret
+ CFI_ENDPROC
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/genapic-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/genapic-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/genapic-xen.c Tue Jan 31
19:55:22 2006
@@ -20,17 +20,18 @@
#include <asm/smp.h>
#include <asm/ipi.h>
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
#include <acpi/acpi_bus.h>
#endif
/* which logical CPU number maps to which CPU (physical APIC ID) */
-u8 x86_cpu_to_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+u8 x86_cpu_to_apicid[NR_CPUS] __read_mostly = { [0 ... NR_CPUS-1] = BAD_APICID
};
EXPORT_SYMBOL(x86_cpu_to_apicid);
u8 x86_cpu_to_log_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
extern struct genapic apic_cluster;
extern struct genapic apic_flat;
+extern struct genapic apic_physflat;
#ifndef CONFIG_XEN
struct genapic *genapic = &apic_flat;
@@ -50,14 +51,9 @@
u8 clusters, max_cluster;
u8 id;
u8 cluster_cnt[NUM_APIC_CLUSTERS];
+ int max_apic = 0;
- if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
- /* AMD always uses flat mode right now */
- genapic = &apic_flat;
- goto print;
- }
-
-#if defined(CONFIG_ACPI_BUS)
+#if defined(CONFIG_ACPI)
/*
* Some x86_64 machines use physical APIC mode regardless of how many
* procs/clusters are present (x86_64 ES7000 is an example).
@@ -70,15 +66,35 @@
#endif
memset(cluster_cnt, 0, sizeof(cluster_cnt));
-
for (i = 0; i < NR_CPUS; i++) {
id = bios_cpu_apicid[i];
- if (id != BAD_APICID)
- cluster_cnt[APIC_CLUSTERID(id)]++;
+ if (id == BAD_APICID)
+ continue;
+ if (id > max_apic)
+ max_apic = id;
+ cluster_cnt[APIC_CLUSTERID(id)]++;
}
+
+ /* Don't use clustered mode on AMD platforms. */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) {
+ genapic = &apic_physflat;
+#ifndef CONFIG_HOTPLUG_CPU
+ /* In the CPU hotplug case we cannot use broadcast mode
+ because that opens a race when a CPU is removed.
+ Stay at physflat mode in this case.
+ It is bad to do this unconditionally though. Once
+ we have ACPI platform support for CPU hotplug
+ we should detect hotplug capablity from ACPI tables and
+ only do this when really needed. -AK */
+ if (max_apic <= 8)
+ genapic = &apic_flat;
+#endif
+ goto print;
+ }
clusters = 0;
max_cluster = 0;
+
for (i = 0; i < NUM_APIC_CLUSTERS; i++) {
if (cluster_cnt[i] > 0) {
++clusters;
@@ -94,9 +110,14 @@
* (We don't use lowest priority delivery + HW APIC IRQ steering, so
* can ignore the clustered logical case and go straight to physical.)
*/
- if (clusters <= 1 && max_cluster <= 8 && cluster_cnt[0] == max_cluster)
+ if (clusters <= 1 && max_cluster <= 8 && cluster_cnt[0] == max_cluster)
{
+#ifdef CONFIG_HOTPLUG_CPU
+ /* Don't use APIC shortcuts in CPU hotplug to avoid races */
+ genapic = &apic_physflat;
+#else
genapic = &apic_flat;
- else
+#endif
+ } else
genapic = &apic_cluster;
print:
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/head-xen.S
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/head-xen.S Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/head-xen.S Tue Jan 31
19:55:22 2006
@@ -120,32 +120,32 @@
ENTRY(level3_kernel_pgt)
.fill 510,8,0
/* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */
- .quad 0x0000000000105007 /* -> level2_kernel_pgt */
+ .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt
*/
.fill 1,8,0
.org 0x4000
ENTRY(level2_ident_pgt)
/* 40MB for bootup. */
- .quad 0x0000000000000283
- .quad 0x0000000000200183
- .quad 0x0000000000400183
- .quad 0x0000000000600183
- .quad 0x0000000000800183
- .quad 0x0000000000A00183
- .quad 0x0000000000C00183
- .quad 0x0000000000E00183
- .quad 0x0000000001000183
- .quad 0x0000000001200183
- .quad 0x0000000001400183
- .quad 0x0000000001600183
- .quad 0x0000000001800183
- .quad 0x0000000001A00183
- .quad 0x0000000001C00183
- .quad 0x0000000001E00183
- .quad 0x0000000002000183
- .quad 0x0000000002200183
- .quad 0x0000000002400183
- .quad 0x0000000002600183
+ .quad 0x0000000000000083
+ .quad 0x0000000000200083
+ .quad 0x0000000000400083
+ .quad 0x0000000000600083
+ .quad 0x0000000000800083
+ .quad 0x0000000000A00083
+ .quad 0x0000000000C00083
+ .quad 0x0000000000E00083
+ .quad 0x0000000001000083
+ .quad 0x0000000001200083
+ .quad 0x0000000001400083
+ .quad 0x0000000001600083
+ .quad 0x0000000001800083
+ .quad 0x0000000001A00083
+ .quad 0x0000000001C00083
+ .quad 0x0000000001E00083
+ .quad 0x0000000002000083
+ .quad 0x0000000002200083
+ .quad 0x0000000002400083
+ .quad 0x0000000002600083
/* Temporary mappings for the super early allocator in
arch/x86_64/mm/init.c */
.globl temp_boot_pmds
temp_boot_pmds:
@@ -227,7 +227,7 @@
.org 0xc000
ENTRY(level3_physmem_pgt)
- .quad 0x0000000000105007 /* -> level2_kernel_pgt (so
that __va works even before pagetable_init) */
+ .quad 0x0000000000005007 + __PHYSICAL_START /* -> level2_kernel_pgt
(so that __va works even before pagetable_init) */
.org 0xd000
ENTRY(hypercall_page)
@@ -235,12 +235,12 @@
.org 0xe000
#ifdef CONFIG_ACPI_SLEEP
ENTRY(wakeup_level4_pgt)
- .quad 0x0000000000102007 /* -> level3_ident_pgt */
+ .quad 0x0000000000002007 + __PHYSICAL_START /* -> level3_ident_pgt
*/
.fill 255,8,0
- .quad 0x000000000010a007
+ .quad 0x000000000000a007 + __PHYSICAL_START
.fill 254,8,0
/* (2^48-(2*1024*1024*1024))/(2^39) = 511 */
- .quad 0x0000000000103007 /* -> level3_kernel_pgt */
+ .quad 0x0000000000003007 + __PHYSICAL_START /* -> level3_kernel_pgt
*/
#endif
.data
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/head64-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/head64-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/head64-xen.c Tue Jan 31
19:55:22 2006
@@ -109,7 +109,7 @@
if (s != NULL)
setup_early_printk(s);
#endif
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
s = strstr(saved_command_line, "numa=");
if (s != NULL)
numa_setup(s+5);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/io_apic-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/io_apic-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/io_apic-xen.c Tue Jan 31
19:55:22 2006
@@ -21,7 +21,6 @@
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
@@ -45,6 +44,8 @@
static int no_timer_check;
+int disable_timer_pin_1 __initdata;
+
static DEFINE_SPINLOCK(ioapic_lock);
/*
@@ -70,7 +71,7 @@
short apic, pin, next;
} irq_2_pin[PIN_MAP_SIZE];
-int vector_irq[NR_VECTORS] = { [0 ... NR_VECTORS - 1] = -1};
+int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1};
#ifdef CONFIG_PCI_MSI
#define vector_to_irq(vector) \
(platform_legacy_irq(vector) ? vector : vector_irq[vector])
@@ -119,6 +120,35 @@
#define io_apic_write(a,r,v) xen_io_apic_write(a,r,v)
#define clear_IO_APIC() ((void)0)
+
+#else
+
+#ifdef CONFIG_SMP
+static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
+{
+ unsigned long flags;
+ unsigned int dest;
+ cpumask_t tmp;
+
+ cpus_and(tmp, mask, cpu_online_map);
+ if (cpus_empty(tmp))
+ tmp = TARGET_CPUS;
+
+ cpus_and(mask, tmp, CPU_MASK_ALL);
+
+ dest = cpu_mask_to_apicid(mask);
+
+ /*
+ * Only the high 8 bits are valid.
+ */
+ dest = SET_APIC_LOGICAL_ID(dest);
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __DO_ACTION(1, = dest, )
+ set_irq_info(irq, mask);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+#endif
#endif /* !CONFIG_XEN */
@@ -378,7 +408,7 @@
/*
* Find the pin to which IRQ[irq] (ISA) is connected
*/
-static int __init find_isa_irq_pin(int irq, int type)
+static int find_isa_irq_pin(int irq, int type)
{
int i;
@@ -704,7 +734,7 @@
}
/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */
-u8 irq_vector[NR_IRQ_VECTORS];
+u8 irq_vector[NR_IRQ_VECTORS] __read_mostly;
int assign_irq_vector(int irq)
{
@@ -816,6 +846,7 @@
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(irq, TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
}
}
@@ -1043,13 +1074,11 @@
v = apic_read(APIC_TASKPRI);
printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v &
APIC_TPRI_MASK);
- if (APIC_INTEGRATED(ver)) { /* !82489DX */
- v = apic_read(APIC_ARBPRI);
- printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
- v & APIC_ARBPRI_MASK);
- v = apic_read(APIC_PROCPRI);
- printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
- }
+ v = apic_read(APIC_ARBPRI);
+ printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v,
+ v & APIC_ARBPRI_MASK);
+ v = apic_read(APIC_PROCPRI);
+ printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v);
v = apic_read(APIC_EOI);
printk(KERN_DEBUG "... APIC EOI: %08x\n", v);
@@ -1069,12 +1098,8 @@
printk(KERN_DEBUG "... APIC IRR field:\n");
print_APIC_bitfield(APIC_IRR);
- if (APIC_INTEGRATED(ver)) { /* !82489DX */
- if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
- apic_write(APIC_ESR, 0);
- v = apic_read(APIC_ESR);
- printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
- }
+ v = apic_read(APIC_ESR);
+ printk(KERN_DEBUG "... APIC ESR: %08x\n", v);
v = apic_read(APIC_ICR);
printk(KERN_DEBUG "... APIC ICR: %08x\n", v);
@@ -1114,7 +1139,6 @@
void __apicdebuginit print_PIC(void)
{
- extern spinlock_t i8259A_lock;
unsigned int v;
unsigned long flags;
@@ -1186,13 +1210,47 @@
*/
void disable_IO_APIC(void)
{
+#ifndef CONFIG_XEN
+ int pin;
+#endif
/*
* Clear the IO-APIC before rebooting:
*/
clear_IO_APIC();
#ifndef CONFIG_XEN
- disconnect_bsp_APIC();
+ /*
+ * If the i8259 is routed through an IOAPIC
+ * Put that IOAPIC in virtual wire mode
+ * so legacy interrupts can be delivered.
+ */
+ pin = find_isa_irq_pin(0, mp_ExtINT);
+ if (pin != -1) {
+ struct IO_APIC_route_entry entry;
+ unsigned long flags;
+
+ memset(&entry, 0, sizeof(entry));
+ entry.mask = 0; /* Enabled */
+ entry.trigger = 0; /* Edge */
+ entry.irr = 0;
+ entry.polarity = 0; /* High */
+ entry.delivery_status = 0;
+ entry.dest_mode = 0; /* Physical */
+ entry.delivery_mode = 7; /* ExtInt */
+ entry.vector = 0;
+ entry.dest.physical.physical_dest = 0;
+
+
+ /*
+ * Add it to the IO-APIC irq-routing table:
+ */
+ spin_lock_irqsave(&ioapic_lock, flags);
+ io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1));
+ io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0));
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+ }
+
+ disconnect_bsp_APIC(pin != -1);
#endif
}
@@ -1344,6 +1402,7 @@
*/
static void ack_edge_ioapic_irq(unsigned int irq)
{
+ move_irq(irq);
if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED))
== (IRQ_PENDING | IRQ_DISABLED))
mask_IO_APIC_irq(irq);
@@ -1373,24 +1432,8 @@
static void end_level_ioapic_irq (unsigned int irq)
{
+ move_irq(irq);
ack_APIC_irq();
-}
-
-static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask)
-{
- unsigned long flags;
- unsigned int dest;
-
- dest = cpu_mask_to_apicid(mask);
-
- /*
- * Only the high 8 bits are valid.
- */
- dest = SET_APIC_LOGICAL_ID(dest);
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __DO_ACTION(1, = dest, )
- spin_unlock_irqrestore(&ioapic_lock, flags);
}
#ifdef CONFIG_PCI_MSI
@@ -1405,6 +1448,7 @@
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
ack_edge_ioapic_irq(irq);
}
@@ -1419,6 +1463,7 @@
{
int irq = vector_to_irq(vector);
+ move_native_irq(vector);
end_level_ioapic_irq(irq);
}
@@ -1436,14 +1481,17 @@
unmask_IO_APIC_irq(irq);
}
+#ifdef CONFIG_SMP
static void set_ioapic_affinity_vector (unsigned int vector,
cpumask_t cpu_mask)
{
int irq = vector_to_irq(vector);
+ set_native_irq_info(vector, cpu_mask);
set_ioapic_affinity_irq(irq, cpu_mask);
}
-#endif
+#endif // CONFIG_SMP
+#endif // CONFIG_PCI_MSI
/*
* Level and edge triggered IO-APIC interrupts need different handling,
@@ -1454,7 +1502,7 @@
* races.
*/
-static struct hw_interrupt_type ioapic_edge_type = {
+static struct hw_interrupt_type ioapic_edge_type __read_mostly = {
.typename = "IO-APIC-edge",
.startup = startup_edge_ioapic,
.shutdown = shutdown_edge_ioapic,
@@ -1462,10 +1510,12 @@
.disable = disable_edge_ioapic,
.ack = ack_edge_ioapic,
.end = end_edge_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
-static struct hw_interrupt_type ioapic_level_type = {
+static struct hw_interrupt_type ioapic_level_type __read_mostly = {
.typename = "IO-APIC-level",
.startup = startup_level_ioapic,
.shutdown = shutdown_level_ioapic,
@@ -1473,7 +1523,9 @@
.disable = disable_level_ioapic,
.ack = mask_and_ack_level_ioapic,
.end = end_level_ioapic,
+#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
+#endif
};
#endif /* !CONFIG_XEN */
@@ -1540,7 +1592,7 @@
static void end_lapic_irq (unsigned int i) { /* nothing */ }
-static struct hw_interrupt_type lapic_irq_type = {
+static struct hw_interrupt_type lapic_irq_type __read_mostly = {
.typename = "local-APIC-edge",
.startup = NULL, /* startup_irq() not used for IRQ0 */
.shutdown = NULL, /* shutdown_irq() not used for IRQ0 */
@@ -1676,6 +1728,8 @@
setup_nmi();
enable_8259A_irq(0);
}
+ if (disable_timer_pin_1 > 0)
+ clear_IO_APIC_pin(0, pin1);
return;
}
clear_IO_APIC_pin(0, pin1);
@@ -1880,7 +1934,7 @@
ACPI-based IOAPIC Configuration
--------------------------------------------------------------------------
*/
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
#define IO_APIC_MAX_ID 0xFE
@@ -1957,12 +2011,13 @@
spin_lock_irqsave(&ioapic_lock, flags);
io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1));
io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0));
+ set_native_irq_info(use_pci_vector() ? entry.vector : irq,
TARGET_CPUS);
spin_unlock_irqrestore(&ioapic_lock, flags);
return 0;
}
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /* CONFIG_ACPI */
#ifndef CONFIG_XEN
@@ -1971,6 +2026,7 @@
* we need to reprogram the ioredtbls to cater for the cpus which have come
online
* so mask in all cases should simply be TARGET_CPUS
*/
+#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
int pin, ioapic, irq, irq_entry;
@@ -1989,4 +2045,5 @@
}
}
+#endif
#endif /* !CONFIG_XEN */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/ioport-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/ioport-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/ioport-xen.c Tue Jan 31
19:55:22 2006
@@ -25,24 +25,24 @@
*
*/
-asmlinkage long sys_iopl(unsigned int new_io_pl, struct pt_regs *regs)
+asmlinkage long sys_iopl(unsigned int new_iopl, struct pt_regs *regs)
{
- unsigned int old_io_pl = current->thread.io_pl;
+ unsigned int old_iopl = current->thread.iopl;
physdev_op_t op;
- if (new_io_pl > 3)
+ if (new_iopl > 3)
return -EINVAL;
/* Need "raw I/O" privileges for direct port access. */
- if ((new_io_pl > old_io_pl) && !capable(CAP_SYS_RAWIO))
+ if ((new_iopl > old_iopl) && !capable(CAP_SYS_RAWIO))
return -EPERM;
/* Change our version of the privilege levels. */
- current->thread.io_pl = new_io_pl;
+ current->thread.iopl = new_iopl;
/* Force the change at ring 0. */
op.cmd = PHYSDEVOP_SET_IOPL;
- op.u.set_iopl.iopl = (new_io_pl == 0) ? 1 : new_io_pl;
+ op.u.set_iopl.iopl = (new_iopl == 0) ? 1 : new_iopl;
HYPERVISOR_physdev_op(&op);
return 0;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/irq-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/irq-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/irq-xen.c Tue Jan 31 19:55:22 2006
@@ -14,6 +14,7 @@
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/module.h>
+#include <linux/delay.h>
#include <asm/uaccess.h>
#include <asm/io_apic.h>
@@ -105,3 +106,50 @@
return 1;
}
+#ifdef CONFIG_HOTPLUG_CPU
+void fixup_irqs(cpumask_t map)
+{
+ unsigned int irq;
+ static int warned;
+
+ for (irq = 0; irq < NR_IRQS; irq++) {
+ cpumask_t mask;
+ if (irq == 2)
+ continue;
+
+ cpus_and(mask, irq_affinity[irq], map);
+ if (any_online_cpu(mask) == NR_CPUS) {
+ printk("Breaking affinity for irq %i\n", irq);
+ mask = map;
+ }
+ if (irq_desc[irq].handler->set_affinity)
+ irq_desc[irq].handler->set_affinity(irq, mask);
+ else if (irq_desc[irq].action && !(warned++))
+ printk("Cannot set affinity for irq %i\n", irq);
+ }
+
+ /* That doesn't seem sufficient. Give it 1ms. */
+ local_irq_enable();
+ mdelay(1);
+ local_irq_disable();
+}
+#endif
+
+extern void call_softirq(void);
+
+asmlinkage void do_softirq(void)
+{
+ __u32 pending;
+ unsigned long flags;
+
+ if (in_interrupt())
+ return;
+
+ local_irq_save(flags);
+ pending = local_softirq_pending();
+ /* Switch to interrupt stack */
+ if (pending)
+ call_softirq();
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(do_softirq);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/mpparse-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/mpparse-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/mpparse-xen.c Tue Jan 31
19:55:22 2006
@@ -14,7 +14,6 @@
*/
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/config.h>
@@ -23,6 +22,7 @@
#include <linux/kernel_stat.h>
#include <linux/mc146818rtc.h>
#include <linux/acpi.h>
+#include <linux/module.h>
#include <asm/smp.h>
#include <asm/mtrr.h>
@@ -45,7 +45,6 @@
int apic_version [MAX_APICS];
unsigned char mp_bus_id_to_type [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] =
-1 };
int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-cpumask_t pci_bus_to_cpumask [256] = { [0 ... 255] = CPU_MASK_ALL };
static int mp_current_pci_id = 0;
/* I/O APIC entries */
@@ -72,7 +71,7 @@
physid_mask_t phys_cpu_present_map = PHYSID_MASK_NONE;
/* ACPI MADT entry parsing functions */
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
extern struct acpi_boot_flags acpi_boot;
#ifdef CONFIG_X86_LOCAL_APIC
extern int acpi_parse_lapic (acpi_table_entry_header *header);
@@ -82,7 +81,7 @@
#ifdef CONFIG_X86_IO_APIC
extern int acpi_parse_ioapic (acpi_table_entry_header *header);
#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
@@ -108,7 +107,7 @@
#ifndef CONFIG_XEN
static void __init MP_processor_info (struct mpc_config_processor *m)
{
- int ver;
+ int ver, cpu;
static int found_bsp=0;
if (!(m->mpc_cpuflag & CPU_ENABLED))
@@ -130,7 +129,7 @@
return;
}
- num_processors++;
+ cpu = num_processors++;
if (m->mpc_apicid > MAX_APICS) {
printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
@@ -154,13 +153,18 @@
* in same order as logical cpu numbers. Hence the first
* entry is BSP, and so on.
*/
+ cpu = 0;
+
bios_cpu_apicid[0] = m->mpc_apicid;
x86_cpu_to_apicid[0] = m->mpc_apicid;
found_bsp = 1;
- } else {
- bios_cpu_apicid[num_processors - found_bsp] = m->mpc_apicid;
- x86_cpu_to_apicid[num_processors - found_bsp] = m->mpc_apicid;
- }
+ } else
+ cpu = num_processors - found_bsp;
+ bios_cpu_apicid[cpu] = m->mpc_apicid;
+ x86_cpu_to_apicid[cpu] = m->mpc_apicid;
+
+ cpu_set(cpu, cpu_possible_map);
+ cpu_set(cpu, cpu_present_map);
}
#else
void __init MP_processor_info (struct mpc_config_processor *m)
@@ -519,8 +523,6 @@
struct intel_mp_floating *mpf = mpf_found;
/*
- * ACPI may be used to obtain the entire SMP configuration or just to
- * enumerate/configure processors (CONFIG_ACPI_BOOT). Note that
* ACPI supports both logical (e.g. Hyper-Threading) and physical
* processors, where MPS only supports physical.
*/
@@ -670,7 +672,7 @@
ACPI-based MP Configuration
--------------------------------------------------------------------------
*/
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
void __init mp_register_lapic_address (
u64 address)
@@ -705,7 +707,7 @@
#ifndef CONFIG_XEN
processor.mpc_type = MP_PROCESSOR;
processor.mpc_apicid = id;
- processor.mpc_apicver = 0x10; /* TBD: lapic version */
+ processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
@@ -909,20 +911,27 @@
return;
}
+#define MAX_GSI_NUM 4096
+
int mp_register_gsi(u32 gsi, int edge_level, int active_high_low)
{
int ioapic = -1;
int ioapic_pin = 0;
int idx, bit = 0;
+ static int pci_irq = 16;
+ /*
+ * Mapping between Global System Interrupts, which
+ * represent all possible interrupts, to the IRQs
+ * assigned to actual devices.
+ */
+ static int gsi_to_irq[MAX_GSI_NUM];
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#ifdef CONFIG_ACPI_BUS
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_fadt.sci_int == gsi)
return gsi;
-#endif
ioapic = mp_find_ioapic(gsi);
if (ioapic < 0) {
@@ -948,10 +957,31 @@
if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi;
+ return gsi_to_irq[gsi];
}
mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+
+ if (edge_level) {
+ /*
+ * For PCI devices assign IRQs in order, avoiding gaps
+ * due to unused I/O APIC pins.
+ */
+ int irq = gsi;
+ if (gsi < MAX_GSI_NUM) {
+ if (gsi > 15)
+ gsi = pci_irq++;
+ /*
+ * Don't assign IRQ used by ACPI SCI
+ */
+ if (gsi == acpi_fadt.sci_int)
+ gsi = pci_irq++;
+ gsi_to_irq[irq] = gsi;
+ } else {
+ printk(KERN_ERR "GSI %u is too high\n", gsi);
+ return gsi;
+ }
+ }
io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
edge_level == ACPI_EDGE_SENSITIVE ? 0 : 1,
@@ -960,4 +990,4 @@
}
#endif /*CONFIG_X86_IO_APIC*/
-#endif /*CONFIG_ACPI_BOOT*/
+#endif /*CONFIG_ACPI*/
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/process-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/process-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/process-xen.c Tue Jan 31
19:55:22 2006
@@ -8,7 +8,8 @@
*
* X86-64 port
* Andi Kleen.
- *
+ *
+ * CPU hotplug support - ashok.raj@xxxxxxxxx
* $Id: process.c,v 1.38 2002/01/15 10:08:03 ak Exp $
*
* Jun Nakajima <jun.nakajima@xxxxxxxxx>
@@ -34,10 +35,10 @@
#include <linux/a.out.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
-#include <linux/irq.h>
#include <linux/ptrace.h>
#include <linux/utsname.h>
#include <linux/random.h>
+#include <linux/kprobes.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
@@ -103,10 +104,15 @@
}
#ifdef CONFIG_HOTPLUG_CPU
+DECLARE_PER_CPU(int, cpu_state);
+
#include <asm/nmi.h>
/* We don't actually take CPU down, just spin without interrupts. */
static inline void play_dead(void)
{
+ idle_task_exit();
+ wbinvd();
+ mb();
/* Ack it */
__get_cpu_var(cpu_state) = CPU_DEAD;
@@ -137,8 +143,6 @@
*/
void cpu_idle (void)
{
- int cpu = smp_processor_id();
-
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched()) {
@@ -146,7 +150,7 @@
__get_cpu_var(cpu_idle_state) = 0;
rmb();
- if (cpu_is_offline(cpu))
+ if (cpu_is_offline(smp_processor_id()))
play_dead();
xen_idle();
@@ -186,7 +190,7 @@
/* XXX XEN doesn't use mwait_idle(), select_idle_routine(), idle_setup(). */
/* Always use xen_idle() instead. */
-void __init select_idle_routine(const struct cpuinfo_x86 *c) {}
+void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) {}
/* Prints also some state that isn't saved in the pt_regs */
void __show_regs(struct pt_regs * regs)
@@ -197,8 +201,11 @@
printk("\n");
print_modules();
- printk("Pid: %d, comm: %.20s %s %s\n",
- current->pid, current->comm, print_tainted(),
system_utsname.release);
+ printk("Pid: %d, comm: %.20s %s %s %.*s\n",
+ current->pid, current->comm, print_tainted(),
+ system_utsname.release,
+ (int)strcspn(system_utsname.version, " "),
+ system_utsname.version);
printk("RIP: %04lx:[<%016lx>] ", regs->cs & 0xffff, regs->rip);
printk_address(regs->rip);
printk("\nRSP: %04lx:%016lx EFLAGS: %08lx\n", regs->ss, regs->rsp,
regs->eflags);
@@ -231,6 +238,7 @@
void show_regs(struct pt_regs *regs)
{
+ printk("CPU %d:", smp_processor_id());
__show_regs(regs);
show_trace(®s->rsp);
}
@@ -242,6 +250,14 @@
{
struct task_struct *me = current;
struct thread_struct *t = &me->thread;
+
+ /*
+ * Remove function-return probe instances associated with this task
+ * and put them back on the free list. Do not insert an exit probe for
+ * this function, it will be disabled by kprobe_flush_task if you do.
+ */
+ kprobe_flush_task(me);
+
if (me->thread.io_bitmap_ptr) {
struct tss_struct *tss = &per_cpu(init_tss, get_cpu());
@@ -265,6 +281,13 @@
{
struct task_struct *tsk = current;
struct thread_info *t = current_thread_info();
+
+ /*
+ * Remove function-return probe instances associated with this task
+ * and put them back on the free list. Do not insert an exit probe for
+ * this function, it will be disabled by kprobe_flush_task if you do.
+ */
+ kprobe_flush_task(tsk);
if (t->flags & _TIF_ABI_PENDING)
t->flags ^= (_TIF_ABI_PENDING | _TIF_IA32);
@@ -384,7 +407,7 @@
if (err)
goto out;
}
- p->thread.io_pl = current->thread.io_pl;
+ p->thread.iopl = current->thread.iopl;
err = 0;
out:
@@ -394,14 +417,6 @@
}
return err;
}
-
-/*
- * This special macro can be used to load a debugging register
- */
-#define loaddebug(thread,register) \
- HYPERVISOR_set_debugreg((register), \
- (thread->debugreg ## register))
-
static inline void __save_init_fpu( struct task_struct *tsk )
{
@@ -463,9 +478,9 @@
C(0); C(1); C(2);
#undef C
- if (unlikely(prev->io_pl != next->io_pl)) {
+ if (unlikely(prev->iopl != next->iopl)) {
iopl_op.cmd = PHYSDEVOP_SET_IOPL;
- iopl_op.u.set_iopl.iopl = (next->io_pl == 0) ? 1 : next->io_pl;
+ iopl_op.u.set_iopl.iopl = (next->iopl == 0) ? 1 : next->iopl;
mcl->op = __HYPERVISOR_physdev_op;
mcl->args[0] = (unsigned long)&iopl_op;
mcl++;
@@ -521,13 +536,13 @@
* Now maybe reload the debug registers
*/
if (unlikely(next->debugreg7)) {
- loaddebug(next, 0);
- loaddebug(next, 1);
- loaddebug(next, 2);
- loaddebug(next, 3);
+ set_debugreg(next->debugreg0, 0);
+ set_debugreg(next->debugreg1, 1);
+ set_debugreg(next->debugreg2, 2);
+ set_debugreg(next->debugreg3, 3);
/* no 4 and 5 */
- loaddebug(next, 6);
- loaddebug(next, 7);
+ set_debugreg(next->debugreg6, 6);
+ set_debugreg(next->debugreg7, 7);
}
return prev_p;
@@ -630,7 +645,7 @@
switch (code) {
case ARCH_SET_GS:
- if (addr >= TASK_SIZE)
+ if (addr >= TASK_SIZE_OF(task))
return -EPERM;
cpu = get_cpu();
/* handle small bases via the GDT because that's faster to
@@ -656,7 +671,7 @@
case ARCH_SET_FS:
/* Not strictly needed for fs, but do it for symmetry
with gs */
- if (addr >= TASK_SIZE)
+ if (addr >= TASK_SIZE_OF(task))
return -EPERM;
cpu = get_cpu();
/* handle small bases via the GDT because that's faster to
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/setup-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/setup-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/setup-xen.c Tue Jan 31
19:55:22 2006
@@ -40,6 +40,9 @@
#include <linux/acpi.h>
#include <linux/kallsyms.h>
#include <linux/edd.h>
+#include <linux/mmzone.h>
+#include <linux/kexec.h>
+
#include <asm/mtrr.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -98,13 +101,13 @@
* Machine setup..
*/
-struct cpuinfo_x86 boot_cpu_data;
+struct cpuinfo_x86 boot_cpu_data __read_mostly;
unsigned long mmu_cr4_features;
int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
extern int __initdata acpi_ht;
extern acpi_interrupt_flags acpi_sci_flags;
int __initdata acpi_force = 0;
@@ -342,7 +345,7 @@
maxcpus = simple_strtoul(from + 8, NULL, 0);
}
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/* "acpi=off" disables both ACPI table parsing and interpreter
init */
if (!memcmp(from, "acpi=off", 8))
disable_acpi();
@@ -401,7 +404,7 @@
if (!memcmp(from, "mem=", 4))
parse_memopt(from+4, &from);
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
if (!memcmp(from, "numa=", 5))
numa_setup(from+5);
#endif
@@ -417,6 +420,27 @@
if (!memcmp(from, "noexec=", 7))
nonx_setup(from + 7);
+
+#ifdef CONFIG_KEXEC
+ /* crashkernel=size@addr specifies the location to reserve for
+ * a crash kernel. By reserving this memory we guarantee
+ * that linux never set's it up as a DMA target.
+ * Useful for holding code to do something appropriate
+ * after a kernel panic.
+ */
+ else if (!memcmp(from, "crashkernel=", 12)) {
+ unsigned long size, base;
+ size = memparse(from+12, &from);
+ if (*from == '@') {
+ base = memparse(from+1, &from);
+ /* FIXME: Do I want a sanity check
+ * to validate the memory range?
+ */
+ crashk_res.start = base;
+ crashk_res.end = base + size - 1;
+ }
+ }
+#endif
next_char:
c = *(from++);
@@ -430,27 +454,33 @@
*cmdline_p = command_line;
}
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NUMA
#ifdef CONFIG_XEN
-static void __init contig_initmem_init(void)
-{
- unsigned long bootmap_size = init_bootmem(start_pfn, end_pfn);
- free_bootmem(0, xen_start_info->nr_pages << PAGE_SHIFT);
+static void __init
+contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+{
+ unsigned long bootmap_size;
+
+ bootmap_size = init_bootmem(start_pfn, end_pfn);
+ free_bootmem(0, xen_start_info->nr_pages << PAGE_SHIFT);
reserve_bootmem(HIGH_MEMORY,
(PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE-1)
- HIGH_MEMORY);
}
#else
-static void __init contig_initmem_init(void)
-{
- unsigned long bootmap_size, bootmap;
- bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
- bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
- if (bootmap == -1L)
- panic("Cannot find bootmem map of size %ld\n",bootmap_size);
- bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
- e820_bootmem_free(&contig_page_data, 0, end_pfn << PAGE_SHIFT);
- reserve_bootmem(bootmap, bootmap_size);
+static void __init
+contig_initmem_init(unsigned long start_pfn, unsigned long end_pfn)
+{
+ unsigned long bootmap_size, bootmap;
+
+ memory_present(0, start_pfn, end_pfn);
+ bootmap_size = bootmem_bootmap_pages(end_pfn)<<PAGE_SHIFT;
+ bootmap = find_e820_area(0, end_pfn<<PAGE_SHIFT, bootmap_size);
+ if (bootmap == -1L)
+ panic("Cannot find bootmem map of size %ld\n",bootmap_size);
+ bootmap_size = init_bootmem(bootmap >> PAGE_SHIFT, end_pfn);
+ e820_bootmem_free(NODE_DATA(0), 0, end_pfn << PAGE_SHIFT);
+ reserve_bootmem(bootmap, bootmap_size);
}
#endif /* !CONFIG_XEN */
#endif
@@ -571,13 +601,19 @@
#ifdef CONFIG_XEN_PHYSDEV_ACCESS
screen_info = SCREEN_INFO;
- /* This is drawn from a dump from vgacon:startup in standard Linux. */
- screen_info.orig_video_mode = 3;
- screen_info.orig_video_isVGA = 1;
- screen_info.orig_video_lines = 25;
- screen_info.orig_video_cols = 80;
- screen_info.orig_video_ega_bx = 3;
- screen_info.orig_video_points = 16;
+ if (xen_start_info->flags & SIF_INITDOMAIN) {
+ /* This is drawn from a dump from vgacon:startup in
+ * standard Linux. */
+ screen_info.orig_video_mode = 3;
+ screen_info.orig_video_isVGA = 1;
+ screen_info.orig_video_lines = 25;
+ screen_info.orig_video_cols = 80;
+ screen_info.orig_video_ega_bx = 3;
+ screen_info.orig_video_points = 16;
+ } else
+ screen_info.orig_video_isVGA = 0;
+#else
+ screen_info.orig_video_isVGA = 0;
#endif
edid_info = EDID_INFO;
saved_video_mode = SAVED_VIDEO_MODE;
@@ -651,10 +687,10 @@
acpi_numa_init();
#endif
-#ifdef CONFIG_DISCONTIGMEM
- numa_initmem_init(0, end_pfn);
+#ifdef CONFIG_NUMA
+ numa_initmem_init(start_pfn, end_pfn);
#else
- contig_initmem_init();
+ contig_initmem_init(start_pfn, end_pfn);
#endif
#ifndef CONFIG_XEN
@@ -730,6 +766,15 @@
}
#endif
#endif /* !CONFIG_XEN */
+#ifdef CONFIG_KEXEC
+ if (crashk_res.start != crashk_res.end) {
+ reserve_bootmem(crashk_res.start,
+ crashk_res.end - crashk_res.start + 1);
+ }
+#endif
+
+ sparse_init();
+
paging_init();
#ifdef CONFIG_X86_LOCAL_APIC
/*
@@ -800,7 +845,7 @@
if ( ! (xen_start_info->flags & SIF_INITDOMAIN))
{
acpi_disabled = 1;
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
acpi_ht = 0;
#endif
}
@@ -810,7 +855,7 @@
check_ioapic();
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
/*
* Initialize the ACPI boot-time table parser (gets the RSDP and SDT).
* Call this early for SRAT node setup.
@@ -904,7 +949,7 @@
#endif /* !CONFIG_XEN */
}
-static int __init get_model_name(struct cpuinfo_x86 *c)
+static int __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
@@ -920,7 +965,7 @@
}
-static void __init display_cacheinfo(struct cpuinfo_x86 *c)
+static void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, eax, ebx, ecx, edx;
@@ -954,6 +999,24 @@
}
}
+#ifdef CONFIG_NUMA
+static int nearby_node(int apicid)
+{
+ int i;
+ for (i = apicid - 1; i >= 0; i--) {
+ int node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
+ int node = apicid_to_node[i];
+ if (node != NUMA_NO_NODE && node_online(node))
+ return node;
+ }
+ return first_node(node_online_map); /* Shouldn't happen */
+}
+#endif
+
/*
* On a AMD dual core setup the lower bits of the APIC id distingush the cores.
* Assumes number of cores is a power of two.
@@ -962,10 +1025,11 @@
{
#ifdef CONFIG_SMP
int cpu = smp_processor_id();
+ unsigned bits;
+#ifdef CONFIG_NUMA
int node = 0;
- unsigned bits;
- if (c->x86_num_cores == 1)
- return;
+ unsigned apicid = phys_proc_id[cpu];
+#endif
bits = 0;
while ((1 << bits) < c->x86_num_cores)
@@ -977,20 +1041,32 @@
phys_proc_id[cpu] >>= bits;
#ifdef CONFIG_NUMA
- /* When an ACPI SRAT table is available use the mappings from SRAT
- instead. */
- if (acpi_numa <= 0) {
- node = phys_proc_id[cpu];
- if (!node_online(node))
- node = first_node(node_online_map);
- cpu_to_node[cpu] = node;
- } else {
- node = cpu_to_node[cpu];
- }
-#endif
-
- printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
- cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
+ node = phys_proc_id[cpu];
+ if (apicid_to_node[apicid] != NUMA_NO_NODE)
+ node = apicid_to_node[apicid];
+ if (!node_online(node)) {
+ /* Two possibilities here:
+ - The CPU is missing memory and no node was created.
+ In that case try picking one from a nearby CPU
+ - The APIC IDs differ from the HyperTransport node IDs
+ which the K8 northbridge parsing fills in.
+ Assume they are all increased by a constant offset,
+ but in the same order as the HT nodeids.
+ If that doesn't result in a usable node fall back to the
+ path for the previous case. */
+ int ht_nodeid = apicid - (phys_proc_id[0] << bits);
+ if (ht_nodeid >= 0 &&
+ apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
+ node = apicid_to_node[ht_nodeid];
+ /* Pick a nearby node */
+ if (!node_online(node))
+ node = nearby_node(apicid);
+ }
+ cpu_to_node[cpu] = node;
+
+ printk(KERN_INFO "CPU %d(%d) -> Node %d -> Core %d\n",
+ cpu, c->x86_num_cores, node, cpu_core_id[cpu]);
+#endif
#endif
}
@@ -998,6 +1074,23 @@
{
int r;
int level;
+
+#ifdef CONFIG_SMP
+ unsigned long value;
+
+ /*
+ * Disable TLB flush filter by setting HWCR.FFDIS on K8
+ * bit 6 of msr C001_0015
+ *
+ * Errata 63 for SH-B3 steppings
+ * Errata 122 for all steppings (F+ have it disabled by default)
+ */
+ if (c->x86 == 15) {
+ rdmsrl(MSR_K8_HWCR, value);
+ value |= 1 << 6;
+ wrmsrl(MSR_K8_HWCR, value);
+ }
+#endif
/* Bit 31 in normal CPUID used for nonstandard 3DNow ID;
3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway */
@@ -1031,7 +1124,7 @@
return r;
}
-static void __init detect_ht(struct cpuinfo_x86 *c)
+static void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
#ifdef CONFIG_SMP
u32 eax, ebx, ecx, edx;
@@ -1092,7 +1185,7 @@
/*
* find out the number of processor cores on the die
*/
-static int __init intel_num_cpu_cores(struct cpuinfo_x86 *c)
+static int __cpuinit intel_num_cpu_cores(struct cpuinfo_x86 *c)
{
unsigned int eax;
@@ -1110,7 +1203,25 @@
return 1;
}
-static void __init init_intel(struct cpuinfo_x86 *c)
+static void srat_detect_node(void)
+{
+#ifdef CONFIG_NUMA
+ unsigned node;
+ int cpu = smp_processor_id();
+
+ /* Don't do the funky fallback heuristics the AMD version employs
+ for now. */
+ node = apicid_to_node[hard_smp_processor_id()];
+ if (node == NUMA_NO_NODE)
+ node = 0;
+ cpu_to_node[cpu] = node;
+
+ if (acpi_numa > 0)
+ printk(KERN_INFO "CPU %d -> Node %d\n", cpu, node);
+#endif
+}
+
+static void __cpuinit init_intel(struct cpuinfo_x86 *c)
{
/* Cache sizes */
unsigned n;
@@ -1128,9 +1239,11 @@
if (c->x86 >= 15)
set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
c->x86_num_cores = intel_num_cpu_cores(c);
-}
-
-void __init get_cpu_vendor(struct cpuinfo_x86 *c)
+
+ srat_detect_node();
+}
+
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
{
char *v = c->x86_vendor_id;
@@ -1151,7 +1264,7 @@
/* Do some early cpuid on the boot CPU to get some parameter that are
needed before check_bugs. Everything advanced is in identify_cpu
below. */
-void __init early_identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
{
u32 tfms;
@@ -1205,7 +1318,7 @@
/*
* This does the hard work of actually picking apart the CPU stuff...
*/
-void __init identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
{
int i;
u32 xlvl;
@@ -1275,14 +1388,17 @@
#ifdef CONFIG_X86_MCE
mcheck_init(c);
#endif
+ if (c == &boot_cpu_data)
+ mtrr_bp_init();
+ else
+ mtrr_ap_init();
#ifdef CONFIG_NUMA
- if (c != &boot_cpu_data)
- numa_add_cpu(c - cpu_data);
+ numa_add_cpu(smp_processor_id());
#endif
}
-void __init print_cpu_info(struct cpuinfo_x86 *c)
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
if (c->x86_model_id[0])
printk("%s", c->x86_model_id);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/setup64-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/setup64-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/setup64-xen.c Tue Jan 31
19:55:22 2006
@@ -16,6 +16,7 @@
#include <linux/string.h>
#include <linux/bootmem.h>
#include <linux/bitops.h>
+#include <linux/module.h>
#include <asm/bootsetup.h>
#include <asm/pda.h>
#include <asm/pgtable.h>
@@ -26,10 +27,8 @@
#include <asm/smp.h>
#include <asm/i387.h>
#include <asm/percpu.h>
-#include <asm/mtrr.h>
#include <asm/proto.h>
-#include <asm/mman.h>
-#include <asm/numa.h>
+#include <asm/sections.h>
#ifdef CONFIG_XEN
#include <asm/hypervisor.h>
#endif
@@ -40,16 +39,11 @@
struct x8664_pda cpu_pda[NR_CPUS] __cacheline_aligned;
-extern struct task_struct init_task;
-
-extern unsigned char __per_cpu_start[], __per_cpu_end[];
-
-extern struct desc_ptr cpu_gdt_descr[];
struct desc_ptr idt_descr = { 256 * 16, (unsigned long) idt_table };
char boot_cpu_stack[IRQSTACKSIZE]
__attribute__((section(".bss.page_aligned")));
-unsigned long __supported_pte_mask = ~0UL;
+unsigned long __supported_pte_mask __read_mostly = ~0UL;
static int do_not_nx __initdata = 0;
/* noexec=on|off
@@ -100,6 +94,10 @@
int i;
unsigned long size;
+#ifdef CONFIG_HOTPLUG_CPU
+ prefill_possible_map();
+#endif
+
/* Copy section for each CPU (we discard the original) */
size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES);
#ifdef CONFIG_MODULES
@@ -107,8 +105,8 @@
size = PERCPU_ENOUGH_ROOM;
#endif
- for (i = 0; i < NR_CPUS; i++) {
- unsigned char *ptr;
+ for_each_cpu_mask (i, cpu_possible_map) {
+ char *ptr;
if (!NODE_DATA(cpu_to_node(i))) {
printk("cpu with no node %d, num_online_nodes %d\n",
@@ -179,8 +177,6 @@
HYPERVISOR_set_segment_base(SEGBASE_GS_KERNEL,
(unsigned long)(cpu_pda + cpu));
#endif
-
- pda->me = pda;
pda->cpunumber = cpu;
pda->irqcount = -1;
pda->kernelstack =
@@ -249,11 +245,7 @@
*/
void __cpuinit cpu_init (void)
{
-#ifdef CONFIG_SMP
int cpu = stack_smp_processor_id();
-#else
- int cpu = smp_processor_id();
-#endif
struct tss_struct *t = &per_cpu(init_tss, cpu);
unsigned long v;
char *estacks = NULL;
@@ -273,7 +265,7 @@
printk("Initializing CPU#%d\n", cpu);
- clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
+ clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
/*
* Initialize the per-CPU GDT with the boot GDT,
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/smp-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/smp-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/smp-xen.c Tue Jan 31 19:55:22 2006
@@ -12,7 +12,6 @@
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/smp_lock.h>
@@ -41,20 +40,44 @@
* writing to user space from interrupts. (Its not allowed anyway).
*
* Optimizations Manfred Spraul <manfred@xxxxxxxxxxxxxxxx>
- */
-
-static cpumask_t flush_cpumask;
-static struct mm_struct * flush_mm;
-static unsigned long flush_va;
-static DEFINE_SPINLOCK(tlbstate_lock);
+ *
+ * More scalable flush, from Andi Kleen
+ *
+ * To avoid global state use 8 different call vectors.
+ * Each CPU uses a specific vector to trigger flushes on other
+ * CPUs. Depending on the received vector the target CPUs look into
+ * the right per cpu variable for the flush data.
+ *
+ * With more than 8 CPUs they are hashed to the 8 available
+ * vectors. The limited global vector space forces us to this right now.
+ * In future when interrupts are split into per CPU domains this could be
+ * fixed, at the cost of triggering multiple IPIs in some cases.
+ */
+
+union smp_flush_state {
+ struct {
+ cpumask_t flush_cpumask;
+ struct mm_struct *flush_mm;
+ unsigned long flush_va;
#define FLUSH_ALL -1ULL
-#endif
+ spinlock_t tlbstate_lock;
+ };
+ char pad[SMP_CACHE_BYTES];
+} ____cacheline_aligned;
+
+/* State is put into the per CPU data section, but padded
+ to a full cache line because other CPUs can access it and we don't
+ want false sharing in the per cpu data segment. */
+static DEFINE_PER_CPU(union smp_flush_state, flush_state);
+#endif
+
+#define __cpuinit __init
/*
* We cannot call mmdrop() because we are in interrupt context,
* instead update mm->cpu_vm_mask.
*/
-static inline void leave_mm (unsigned long cpu)
+static inline void leave_mm(unsigned long cpu)
{
if (read_pda(mmu_state) == TLBSTATE_OK)
BUG();
@@ -107,15 +130,25 @@
*
* 1) Flush the tlb entries if the cpu uses the mm that's being flushed.
* 2) Leave the mm if we are in the lazy tlb mode.
- */
-
-asmlinkage void smp_invalidate_interrupt (void)
-{
- unsigned long cpu;
-
- cpu = get_cpu();
-
- if (!cpu_isset(cpu, flush_cpumask))
+ *
+ * Interrupts are disabled.
+ */
+
+asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs)
+{
+ int cpu;
+ int sender;
+ union smp_flush_state *f;
+
+ cpu = smp_processor_id();
+ /*
+ * orig_rax contains the interrupt vector - 256.
+ * Use that to determine where the sender put the data.
+ */
+ sender = regs->orig_rax + 256 - INVALIDATE_TLB_VECTOR_START;
+ f = &per_cpu(flush_state, sender);
+
+ if (!cpu_isset(cpu, f->flush_cpumask))
goto out;
/*
* This was a BUG() but until someone can quote me the
@@ -126,65 +159,63 @@
* BUG();
*/
- if (flush_mm == read_pda(active_mm)) {
+ if (f->flush_mm == read_pda(active_mm)) {
if (read_pda(mmu_state) == TLBSTATE_OK) {
- if (flush_va == FLUSH_ALL)
+ if (f->flush_va == FLUSH_ALL)
local_flush_tlb();
else
- __flush_tlb_one(flush_va);
+ __flush_tlb_one(f->flush_va);
} else
leave_mm(cpu);
}
+out:
ack_APIC_irq();
- cpu_clear(cpu, flush_cpumask);
-
-out:
- put_cpu_no_resched();
+ cpu_clear(cpu, f->flush_cpumask);
}
static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
unsigned long va)
{
- cpumask_t tmp;
- /*
- * A couple of (to be removed) sanity checks:
- *
- * - we do not send IPIs to not-yet booted CPUs.
- * - current CPU must not be in mask
- * - mask must exist :)
- */
- BUG_ON(cpus_empty(cpumask));
- cpus_and(tmp, cpumask, cpu_online_map);
- BUG_ON(!cpus_equal(tmp, cpumask));
- BUG_ON(cpu_isset(smp_processor_id(), cpumask));
- if (!mm)
- BUG();
-
- /*
- * I'm not happy about this global shared spinlock in the
- * MM hot path, but we'll see how contended it is.
- * Temporarily this turns IRQs off, so that lockups are
- * detected by the NMI watchdog.
- */
- spin_lock(&tlbstate_lock);
-
- flush_mm = mm;
- flush_va = va;
- cpus_or(flush_cpumask, cpumask, flush_cpumask);
+ int sender;
+ union smp_flush_state *f;
+
+ /* Caller has disabled preemption */
+ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS;
+ f = &per_cpu(flush_state, sender);
+
+ /* Could avoid this lock when
+ num_online_cpus() <= NUM_INVALIDATE_TLB_VECTORS, but it is
+ probably not worth checking this for a cache-hot lock. */
+ spin_lock(&f->tlbstate_lock);
+
+ f->flush_mm = mm;
+ f->flush_va = va;
+ cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask);
/*
* We have to send the IPI only to
* CPUs affected.
*/
- send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR);
-
- while (!cpus_empty(flush_cpumask))
- mb(); /* nothing. lockup detection does not belong here */;
-
- flush_mm = NULL;
- flush_va = 0;
- spin_unlock(&tlbstate_lock);
-}
+ send_IPI_mask(cpumask, INVALIDATE_TLB_VECTOR_START + sender);
+
+ while (!cpus_empty(f->flush_cpumask))
+ cpu_relax();
+
+ f->flush_mm = NULL;
+ f->flush_va = 0;
+ spin_unlock(&f->tlbstate_lock);
+}
+
+int __cpuinit init_smp_flush(void)
+{
+ int i;
+ for_each_cpu_mask(i, cpu_possible_map) {
+ spin_lock_init(&per_cpu(flush_state.tlbstate_lock, i));
+ }
+ return 0;
+}
+
+core_initcall(init_smp_flush);
void flush_tlb_current_task(void)
{
@@ -300,6 +331,82 @@
};
static struct call_data_struct * call_data;
+
+void lock_ipi_call_lock(void)
+{
+ spin_lock_irq(&call_lock);
+}
+
+void unlock_ipi_call_lock(void)
+{
+ spin_unlock_irq(&call_lock);
+}
+
+/*
+ * this function sends a 'generic call function' IPI to one other CPU
+ * in the system.
+ *
+ * cpu is a standard Linux logical CPU number.
+ */
+static void
+__smp_call_function_single(int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ struct call_data_struct data;
+ int cpus = 1;
+
+ data.func = func;
+ data.info = info;
+ atomic_set(&data.started, 0);
+ data.wait = wait;
+ if (wait)
+ atomic_set(&data.finished, 0);
+
+ call_data = &data;
+ wmb();
+ /* Send a message to all other CPUs and wait for them to respond */
+ send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
+
+ /* Wait for response */
+ while (atomic_read(&data.started) != cpus)
+ cpu_relax();
+
+ if (!wait)
+ return;
+
+ while (atomic_read(&data.finished) != cpus)
+ cpu_relax();
+}
+
+/*
+ * smp_call_function_single - Run a function on another CPU
+ * @func: The function to run. This must be fast and non-blocking.
+ * @info: An arbitrary pointer to pass to the function.
+ * @nonatomic: Currently unused.
+ * @wait: If true, wait until function has completed on other CPUs.
+ *
+ * Retrurns 0 on success, else a negative status code.
+ *
+ * Does not return until the remote CPU is nearly ready to execute <func>
+ * or is or has executed.
+ */
+
+int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
+ int nonatomic, int wait)
+{
+ /* prevent preemption and reschedule on another processor */
+ int me = get_cpu();
+ if (cpu == me) {
+ WARN_ON(1);
+ put_cpu();
+ return -EBUSY;
+ }
+ spin_lock_bh(&call_lock);
+ __smp_call_function_single(cpu, func, info, nonatomic, wait);
+ spin_unlock_bh(&call_lock);
+ put_cpu();
+ return 0;
+}
/*
* this function sends a 'generic call function' IPI to all other CPUs
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/traps-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/traps-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/traps-xen.c Tue Jan 31
19:55:22 2006
@@ -29,6 +29,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/nmi.h>
+#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -45,9 +46,6 @@
#include <asm/pda.h>
#include <asm/proto.h>
#include <asm/nmi.h>
-
-#include <linux/irq.h>
-
extern struct gate_struct idt_table[256];
@@ -274,7 +272,7 @@
void show_registers(struct pt_regs *regs)
{
int i;
- int in_kernel = (regs->cs & 3) == 0;
+ int in_kernel = !user_mode(regs);
unsigned long rsp;
const int cpu = safe_smp_processor_id();
struct task_struct *cur = cpu_pda[cpu].pcurrent;
@@ -318,18 +316,18 @@
struct bug_frame f;
char tmp;
- if (regs->cs & 3)
+ if (user_mode(regs))
return;
if (__copy_from_user(&f, (struct bug_frame *) regs->rip,
sizeof(struct bug_frame)))
return;
- if ((unsigned long)f.filename < __PAGE_OFFSET ||
+ if (f.filename >= 0 ||
f.ud2[0] != 0x0f || f.ud2[1] != 0x0b)
return;
- if (__get_user(tmp, f.filename))
- f.filename = "unmapped filename";
+ if (__get_user(tmp, (char *)(long)f.filename))
+ f.filename = (int)(long)"unmapped filename";
printk("----------- [cut here ] --------- [please bite here ]
---------\n");
- printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", f.filename, f.line);
+ printk(KERN_ALERT "Kernel BUG at %.50s:%d\n", (char *)(long)f.filename,
f.line);
}
#ifdef CONFIG_BUG
@@ -342,30 +340,33 @@
static DEFINE_SPINLOCK(die_lock);
static int die_owner = -1;
-void oops_begin(void)
-{
- int cpu = safe_smp_processor_id();
- /* racy, but better than risking deadlock. */
- local_irq_disable();
+unsigned long oops_begin(void)
+{
+ int cpu = safe_smp_processor_id();
+ unsigned long flags;
+
+ /* racy, but better than risking deadlock. */
+ local_irq_save(flags);
if (!spin_trylock(&die_lock)) {
if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
- spin_lock(&die_lock);
- }
- die_owner = cpu;
+ spin_lock(&die_lock);
+ }
+ die_owner = cpu;
console_verbose();
- bust_spinlocks(1);
-}
-
-void oops_end(void)
+ bust_spinlocks(1);
+ return flags;
+}
+
+void oops_end(unsigned long flags)
{
die_owner = -1;
- bust_spinlocks(0);
- spin_unlock(&die_lock);
+ bust_spinlocks(0);
+ spin_unlock_irqrestore(&die_lock, flags);
if (panic_on_oops)
- panic("Oops");
-}
+ panic("Oops");
+}
void __die(const char * str, struct pt_regs * regs, long err)
{
@@ -391,10 +392,11 @@
void die(const char * str, struct pt_regs * regs, long err)
{
- oops_begin();
+ unsigned long flags = oops_begin();
+
handle_BUG(regs);
__die(str, regs, err);
- oops_end();
+ oops_end(flags);
do_exit(SIGSEGV);
}
static inline void die_if_kernel(const char * str, struct pt_regs * regs, long
err)
@@ -406,7 +408,8 @@
#ifdef CONFIG_X86_LOCAL_APIC
void die_nmi(char *str, struct pt_regs *regs)
{
- oops_begin();
+ unsigned long flags = oops_begin();
+
/*
* We are in trouble anyway, lets at least try
* to get a message out.
@@ -416,13 +419,14 @@
if (panic_on_timeout || panic_on_oops)
panic("nmi watchdog");
printk("console shuts up ...\n");
- oops_end();
+ oops_end(flags);
do_exit(SIGSEGV);
}
#endif
-static void do_trap(int trapnr, int signr, char *str,
- struct pt_regs * regs, long error_code, siginfo_t
*info)
+static void __kprobes do_trap(int trapnr, int signr, char *str,
+ struct pt_regs * regs, long error_code,
+ siginfo_t *info)
{
conditional_sti(regs);
@@ -439,7 +443,7 @@
}
#endif
- if ((regs->cs & 3) != 0) {
+ if (user_mode(regs)) {
struct task_struct *tsk = current;
if (exception_trace && unhandled_signal(tsk, signr))
@@ -506,7 +510,8 @@
DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR( 8, SIGSEGV, "double fault", double_fault)
-asmlinkage void do_general_protection(struct pt_regs * regs, long error_code)
+asmlinkage void __kprobes do_general_protection(struct pt_regs * regs,
+ long error_code)
{
conditional_sti(regs);
@@ -524,7 +529,7 @@
}
#endif
- if ((regs->cs & 3)!=0) {
+ if (user_mode(regs)) {
struct task_struct *tsk = current;
if (exception_trace && unhandled_signal(tsk, SIGSEGV))
@@ -592,9 +597,12 @@
asmlinkage void default_do_nmi(struct pt_regs *regs)
{
unsigned char reason = 0;
+ int cpu;
+
+ cpu = smp_processor_id();
/* Only the BSP gets external NMIs from the system. */
- if (!smp_processor_id())
+ if (!cpu)
reason = get_nmi_reason();
if (!(reason & 0xc0)) {
@@ -625,7 +633,7 @@
io_check_error(reason, regs);
}
-asmlinkage void do_int3(struct pt_regs * regs, long error_code)
+asmlinkage void __kprobes do_int3(struct pt_regs * regs, long error_code)
{
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) ==
NOTIFY_STOP) {
return;
@@ -644,7 +652,7 @@
if (eregs == (struct pt_regs *)eregs->rsp)
;
/* Exception from user space */
- else if (eregs->cs & 3)
+ else if (user_mode(eregs))
regs = ((struct pt_regs *)current->thread.rsp0) - 1;
/* Exception from kernel and interrupts are enabled. Move to
kernel process stack. */
@@ -656,7 +664,8 @@
}
/* runs on IST stack. */
-asmlinkage void do_debug(struct pt_regs * regs, unsigned long error_code)
+asmlinkage void __kprobes do_debug(struct pt_regs * regs,
+ unsigned long error_code)
{
unsigned long condition;
struct task_struct *tsk = current;
@@ -675,7 +684,7 @@
}
#endif
- asm("movq %%db6,%0" : "=r" (condition));
+ get_debugreg(condition, 6);
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
SIGTRAP) == NOTIFY_STOP)
@@ -703,7 +712,7 @@
* allowing programs to debug themselves without the ptrace()
* interface.
*/
- if ((regs->cs & 3) == 0)
+ if (!user_mode(regs))
goto clear_TF_reenable;
/*
* Was the TF flag set by a debugger? If so, clear it now,
@@ -721,13 +730,13 @@
info.si_signo = SIGTRAP;
info.si_errno = 0;
info.si_code = TRAP_BRKPT;
- if ((regs->cs & 3) == 0)
+ if (!user_mode(regs))
goto clear_dr7;
info.si_addr = (void __user *)regs->rip;
force_sig_info(SIGTRAP, &info, tsk);
clear_dr7:
- asm volatile("movq %0,%%db7"::"r"(0UL));
+ set_debugreg(0UL, 7);
return;
clear_TF_reenable:
@@ -762,7 +771,7 @@
unsigned short cwd, swd;
conditional_sti(regs);
- if ((regs->cs & 3) == 0 &&
+ if (!user_mode(regs) &&
kernel_math_error(regs, "kernel x87 math error"))
return;
@@ -789,13 +798,16 @@
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
- switch (((~cwd) & swd & 0x3f) | (swd & 0x240)) {
+ switch (swd & ~cwd & 0x3f) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
- case 0x041: /* Stack Fault */
- case 0x241: /* Stack Fault | Direction */
+ /*
+ * swd & 0x240 == 0x040: Stack Underflow
+ * swd & 0x240 == 0x240: Stack Overflow
+ * User must clear the SF bit (0x40) if set
+ */
info.si_code = FPE_FLTINV;
break;
case 0x002: /* Denormalize */
@@ -828,7 +840,7 @@
unsigned short mxcsr;
conditional_sti(regs);
- if ((regs->cs & 3) == 0 &&
+ if (!user_mode(regs) &&
kernel_math_error(regs, "kernel simd math error"))
return;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/vsyscall-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/vsyscall-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/vsyscall-xen.c Tue Jan 31
19:55:22 2006
@@ -107,7 +107,7 @@
return secs;
}
-static int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone *
tz)
+int __vsyscall(0) vgettimeofday(struct timeval * tv, struct timezone * tz)
{
if (unlikely(!__sysctl_vsyscall))
return gettimeofday(tv,tz);
@@ -120,7 +120,7 @@
/* This will break when the xtime seconds get inaccurate, but that is
* unlikely */
-static time_t __vsyscall(1) vtime(time_t *t)
+time_t __vsyscall(1) vtime(time_t *t)
{
if (unlikely(!__sysctl_vsyscall))
return time_syscall(t);
@@ -129,12 +129,12 @@
return __xtime.tv_sec;
}
-static long __vsyscall(2) venosys_0(void)
+long __vsyscall(2) venosys_0(void)
{
return -ENOSYS;
}
-static long __vsyscall(3) venosys_1(void)
+long __vsyscall(3) venosys_1(void)
{
return -ENOSYS;
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/x8664_ksyms-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/x8664_ksyms-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/kernel/x8664_ksyms-xen.c Tue Jan 31
19:55:22 2006
@@ -59,7 +59,9 @@
EXPORT_SYMBOL(probe_irq_mask);
EXPORT_SYMBOL(kernel_thread);
EXPORT_SYMBOL(pm_idle);
+#ifdef CONFIG_ACPI_BOOT
EXPORT_SYMBOL(pm_power_off);
+#endif
EXPORT_SYMBOL(get_cmos_time);
EXPORT_SYMBOL(__down_failed);
@@ -177,10 +179,6 @@
EXPORT_SYMBOL(empty_zero_page);
-#ifdef CONFIG_HAVE_DEC_LOCK
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif
-
EXPORT_SYMBOL(die_chain);
EXPORT_SYMBOL(register_die_notifier);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/mm/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/mm/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/mm/Makefile Tue Jan 31 19:55:22 2006
@@ -4,7 +4,7 @@
obj-y := init.o fault.o ioremap.o extable.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
-obj-$(CONFIG_DISCONTIGMEM) += numa.o
+obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_K8_NUMA) += k8topology.o
obj-$(CONFIG_ACPI_NUMA) += srat.o
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/mm/fault-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/mm/fault-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/mm/fault-xen.c Tue Jan 31 19:55:22 2006
@@ -23,8 +23,8 @@
#include <linux/vt_kern.h> /* For unblank_screen() */
#include <linux/compiler.h>
#include <linux/module.h>
+#include <linux/kprobes.h>
#include <linux/percpu.h>
-#include <linux/kprobes.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -77,7 +77,7 @@
instr = (unsigned char *)convert_rip_to_linear(current, regs);
max_instr = instr + 15;
- if ((regs->cs & 3) != 0 && instr >= (unsigned char *)TASK_SIZE)
+ if (user_mode(regs) && instr >= (unsigned char *)TASK_SIZE)
return 0;
while (scan_more && instr < max_instr) {
@@ -109,7 +109,7 @@
/* Could check the LDT for lm, but for now it's good
enough to assume that long mode only uses well known
segments or kernel. */
- scan_more = ((regs->cs & 3) == 0) || (regs->cs ==
__USER_CS);
+ scan_more = (!user_mode(regs)) || (regs->cs ==
__USER_CS);
break;
case 0x60:
@@ -215,9 +215,7 @@
{
if (tsk->pid == 1)
return 1;
- /* Warn for strace, but not for gdb */
- if (!test_ti_thread_flag(tsk->thread_info, TIF_SYSCALL_TRACE) &&
- (tsk->ptrace & PT_PTRACED))
+ if (tsk->ptrace & PT_PTRACED)
return 0;
return (tsk->sighand->action[sig-1].sa.sa_handler == SIG_IGN) ||
(tsk->sighand->action[sig-1].sa.sa_handler == SIG_DFL);
@@ -226,12 +224,13 @@
static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs,
unsigned long error_code)
{
- oops_begin();
+ unsigned long flags = oops_begin();
+
printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
current->comm, address);
dump_pagetable(address);
__die("Bad pagetable", regs, error_code);
- oops_end();
+ oops_end(flags);
do_exit(SIGKILL);
}
@@ -316,7 +315,8 @@
* bit 2 == 0 means kernel, 1 means user-mode
* bit 3 == 1 means fault was an instruction fetch
*/
-asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long error_code)
+asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
+ unsigned long error_code)
{
struct task_struct *tsk;
struct mm_struct *mm;
@@ -324,6 +324,7 @@
unsigned long address;
const struct exception_table_entry *fixup;
int write;
+ unsigned long flags;
siginfo_t info;
if (!user_mode(regs))
@@ -374,7 +375,7 @@
* (error_code & 4) == 0, and that the fault was not a
* protection error (error_code & 1) == 0.
*/
- if (unlikely(address >= TASK_SIZE)) {
+ if (unlikely(address >= TASK_SIZE64)) {
if (!(error_code & 5) &&
((address >= VMALLOC_START && address < VMALLOC_END) ||
(address >= MODULES_VADDR && address < MODULES_END))) {
@@ -464,13 +465,13 @@
* the fault.
*/
switch (handle_mm_fault(mm, vma, address, write)) {
- case 1:
+ case VM_FAULT_MINOR:
tsk->min_flt++;
break;
- case 2:
+ case VM_FAULT_MAJOR:
tsk->maj_flt++;
break;
- case 0:
+ case VM_FAULT_SIGBUS:
goto do_sigbus;
default:
goto out_of_memory;
@@ -546,7 +547,7 @@
* terminate things with extreme prejudice.
*/
- oops_begin();
+ flags = oops_begin();
if (address < PAGE_SIZE)
printk(KERN_ALERT "Unable to handle kernel NULL pointer
dereference");
@@ -559,7 +560,7 @@
__die("Oops", regs, error_code);
/* Executive summary in case the body of the oops scrolled away */
printk(KERN_EMERG "CR2: %016lx\n", address);
- oops_end();
+ oops_end(flags);
do_exit(SIGKILL);
/*
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/mm/init-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/mm/init-xen.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/mm/init-xen.c Tue Jan 31 19:55:22 2006
@@ -165,31 +165,31 @@
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ long i, total = 0, reserved = 0;
+ long shared = 0, cached = 0;
pg_data_t *pgdat;
struct page *page;
- printk("Mem-info:\n");
+ printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
+ printk(KERN_INFO "Free swap: %6ldkB\n",
nr_swap_pages<<(PAGE_SHIFT-10));
for_each_pgdat(pgdat) {
for (i = 0; i < pgdat->node_spanned_pages; ++i) {
page = pfn_to_page(pgdat->node_start_pfn + i);
total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (page_count(page))
- shared += page_count(page) - 1;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
}
}
- printk("%d pages of RAM\n", total);
- printk("%d reserved pages\n",reserved);
- printk("%d pages shared\n",shared);
- printk("%d pages swap cached\n",cached);
+ printk(KERN_INFO "%lu pages of RAM\n", total);
+ printk(KERN_INFO "%lu reserved pages\n",reserved);
+ printk(KERN_INFO "%lu pages shared\n",shared);
+ printk(KERN_INFO "%lu pages swap cached\n",cached);
}
/* References to section boundaries */
@@ -638,22 +638,31 @@
#endif
}
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NUMA
void __init paging_init(void)
{
{
- unsigned long zones_size[MAX_NR_ZONES] = {0, 0, 0};
+ unsigned long zones_size[MAX_NR_ZONES];
+ unsigned long holes[MAX_NR_ZONES];
/* unsigned int max_dma; */
+
+ memset(zones_size, 0, sizeof(zones_size));
+ memset(holes, 0, sizeof(holes));
+
/* max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >>
PAGE_SHIFT; */
- /* if (end_pfn < max_dma) */
+ /* if (end_pfn < max_dma) { */
zones_size[ZONE_DMA] = end_pfn;
#if 0
- else {
+ holes[ZONE_DMA] = e820_hole_size(0, end_pfn);
+ } else {
zones_size[ZONE_DMA] = max_dma;
+ holes[ZONE_DMA] = e820_hole_size(0, max_dma);
zones_size[ZONE_NORMAL] = end_pfn - max_dma;
+ holes[ZONE_NORMAL] = e820_hole_size(max_dma, end_pfn);
}
#endif
- free_area_init(zones_size);
+ free_area_init_node(0, NODE_DATA(0), zones_size,
+ __pa(PAGE_OFFSET) >> PAGE_SHIFT, holes);
}
set_fixmap(FIX_SHARED_INFO, xen_start_info->shared_info);
@@ -713,18 +722,12 @@
__flush_tlb_all();
}
-static inline int page_is_ram (unsigned long pagenr)
-{
- return 1;
-}
-
static struct kcore_list kcore_mem, kcore_vmalloc, kcore_kernel, kcore_modules,
kcore_vsyscall;
void __init mem_init(void)
{
- int codesize, reservedpages, datasize, initsize;
- int tmp;
+ long codesize, reservedpages, datasize, initsize;
contiguous_bitmap = alloc_bootmem_low_pages(
(end_pfn + 2*BITS_PER_LONG) >> 3);
@@ -747,23 +750,12 @@
reservedpages = 0;
/* this will put all low memory onto the freelists */
-#ifdef CONFIG_DISCONTIGMEM
- totalram_pages += numa_free_all_bootmem();
- tmp = 0;
- /* should count reserved pages here for all nodes */
+#ifdef CONFIG_NUMA
+ totalram_pages = numa_free_all_bootmem();
#else
- max_mapnr = end_pfn;
- if (!mem_map) BUG();
-
- totalram_pages += free_all_bootmem();
-
- for (tmp = 0; tmp < end_pfn; tmp++)
- /*
- * Only count reserved RAM pages
- */
- if (page_is_ram(tmp) && PageReserved(pfn_to_page(tmp)))
- reservedpages++;
-#endif
+ totalram_pages = free_all_bootmem();
+#endif
+ reservedpages = end_pfn - totalram_pages - e820_hole_size(0, end_pfn);
after_bootmem = 1;
@@ -780,7 +772,7 @@
kclist_add(&kcore_vsyscall, (void *)VSYSCALL_START,
VSYSCALL_END - VSYSCALL_START);
- printk("Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk
data, %dk init)\n",
+ printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved,
%ldk data, %ldk init)\n",
(unsigned long) nr_free_pages() << (PAGE_SHIFT-10),
end_pfn << (PAGE_SHIFT-10),
codesize >> 10,
@@ -849,7 +841,7 @@
void __init reserve_bootmem_generic(unsigned long phys, unsigned len)
{
/* Should check here against the e820 map to avoid double free */
-#ifdef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_NUMA
int nid = phys_to_nid(phys);
reserve_bootmem_node(NODE_DATA(nid), phys, len);
#else
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/mm/pageattr-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/mm/pageattr-xen.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/mm/pageattr-xen.c Tue Jan 31
19:55:22 2006
@@ -367,8 +367,6 @@
down_read(&init_mm.mmap_sem);
df = xchg(&df_list, NULL);
up_read(&init_mm.mmap_sem);
- if (!df)
- return;
flush_map((df && !df->next) ? df->address : 0);
for (; df; df = next_df) {
next_df = df->next;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/pci/Makefile
--- a/linux-2.6-xen-sparse/arch/x86_64/pci/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/pci/Makefile Tue Jan 31 19:55:22 2006
@@ -8,7 +8,7 @@
obj-y := i386.o
obj-$(CONFIG_PCI_DIRECT)+= direct.o
obj-y += fixup.o
-obj-$(CONFIG_ACPI_PCI) += acpi.o
+obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o common.o
# mmconfig has a 64bit special
obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o
@@ -25,7 +25,7 @@
ifdef CONFIG_XEN
irq-y := ../../i386/pci/irq-xen.o
-i386-y := ../../i386/pci/i386-xen.o
+i386-y := ../../i386/pci/i386.o
include $(srctree)/scripts/Makefile.xen
obj-y := $(call cherrypickxen, $(obj-y))
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/Kconfig
--- a/linux-2.6-xen-sparse/drivers/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/Kconfig Tue Jan 31 19:55:22 2006
@@ -5,6 +5,9 @@
source "drivers/base/Kconfig"
if !XEN || XEN_PHYSDEV_ACCESS
+
+source "drivers/connector/Kconfig"
+
source "drivers/mtd/Kconfig"
source "drivers/parport/Kconfig"
@@ -36,7 +39,7 @@
source "drivers/macintosh/Kconfig"
endif
-source "net/Kconfig"
+source "drivers/net/Kconfig"
if !XEN || XEN_PHYSDEV_ACCESS
source "drivers/isdn/Kconfig"
@@ -53,7 +56,11 @@
source "drivers/w1/Kconfig"
+source "drivers/hwmon/Kconfig"
+
source "drivers/misc/Kconfig"
+
+source "drivers/mfd/Kconfig"
source "drivers/media/Kconfig"
@@ -68,4 +75,6 @@
source "drivers/infiniband/Kconfig"
endif
+source "drivers/sn/Kconfig"
+
endmenu
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/Makefile
--- a/linux-2.6-xen-sparse/drivers/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/Makefile Tue Jan 31 19:55:22 2006
@@ -8,7 +8,7 @@
obj-$(CONFIG_PCI) += pci/
obj-$(CONFIG_PARISC) += parisc/
obj-y += video/
-obj-$(CONFIG_ACPI_BOOT) += acpi/
+obj-$(CONFIG_ACPI) += acpi/
# PnP must come after ACPI since it will eventually need to check if acpi
# was used and do nothing if so
obj-$(CONFIG_PNP) += pnp/
@@ -16,6 +16,8 @@
# char/ comes before serial/ etc so that the VT console is the boot-time
# default.
obj-y += char/
+
+obj-$(CONFIG_CONNECTOR) += connector/
# i810fb and intelfb depend on char/agp/
obj-$(CONFIG_FB_I810) += video/i810/
@@ -26,7 +28,7 @@
obj-$(CONFIG_SERIO) += input/serio/
obj-y += serial/
obj-$(CONFIG_PARPORT) += parport/
-obj-y += base/ block/ misc/ net/ media/
+obj-y += base/ block/ misc/ mfd/ net/ media/
obj-$(CONFIG_NUBUS) += nubus/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_PPC_PMAC) += macintosh/
@@ -53,6 +55,7 @@
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_I2C) += i2c/
obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_HWMON) += hwmon/
obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BT) += bluetooth/
@@ -62,6 +65,6 @@
obj-$(CONFIG_CPU_FREQ) += cpufreq/
obj-$(CONFIG_MMC) += mmc/
obj-$(CONFIG_INFINIBAND) += infiniband/
-obj-$(CONFIG_BLK_DEV_SGIIOC4) += sn/
+obj-$(CONFIG_SGI_IOC4) += sn/
obj-y += firmware/
obj-$(CONFIG_CRYPTO) += crypto/
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/acpi/tables.c
--- a/linux-2.6-xen-sparse/drivers/acpi/tables.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/acpi/tables.c Tue Jan 31 19:55:22 2006
@@ -40,25 +40,25 @@
#define ACPI_MAX_TABLES 256
static char *acpi_table_signatures[ACPI_TABLE_COUNT] = {
- [ACPI_TABLE_UNKNOWN] = "????",
- [ACPI_APIC] = "APIC",
- [ACPI_BOOT] = "BOOT",
- [ACPI_DBGP] = "DBGP",
- [ACPI_DSDT] = "DSDT",
- [ACPI_ECDT] = "ECDT",
- [ACPI_ETDT] = "ETDT",
- [ACPI_FADT] = "FACP",
- [ACPI_FACS] = "FACS",
- [ACPI_OEMX] = "OEM",
- [ACPI_PSDT] = "PSDT",
- [ACPI_SBST] = "SBST",
- [ACPI_SLIT] = "SLIT",
- [ACPI_SPCR] = "SPCR",
- [ACPI_SRAT] = "SRAT",
- [ACPI_SSDT] = "SSDT",
- [ACPI_SPMI] = "SPMI",
- [ACPI_HPET] = "HPET",
- [ACPI_MCFG] = "MCFG",
+ [ACPI_TABLE_UNKNOWN] = "????",
+ [ACPI_APIC] = "APIC",
+ [ACPI_BOOT] = "BOOT",
+ [ACPI_DBGP] = "DBGP",
+ [ACPI_DSDT] = "DSDT",
+ [ACPI_ECDT] = "ECDT",
+ [ACPI_ETDT] = "ETDT",
+ [ACPI_FADT] = "FACP",
+ [ACPI_FACS] = "FACS",
+ [ACPI_OEMX] = "OEM",
+ [ACPI_PSDT] = "PSDT",
+ [ACPI_SBST] = "SBST",
+ [ACPI_SLIT] = "SLIT",
+ [ACPI_SPCR] = "SPCR",
+ [ACPI_SRAT] = "SRAT",
+ [ACPI_SSDT] = "SSDT",
+ [ACPI_SPMI] = "SPMI",
+ [ACPI_HPET] = "HPET",
+ [ACPI_MCFG] = "MCFG",
};
static char *mps_inti_flags_polarity[] = { "dfl", "high", "res", "low" };
@@ -66,52 +66,44 @@
/* System Description Table (RSDT/XSDT) */
struct acpi_table_sdt {
- unsigned long pa;
- enum acpi_table_id id;
- unsigned long size;
+ unsigned long pa;
+ enum acpi_table_id id;
+ unsigned long size;
} __attribute__ ((packed));
-static unsigned long sdt_pa; /* Physical Address */
-static unsigned long sdt_count; /* Table count */
-
-static struct acpi_table_sdt sdt_entry[ACPI_MAX_TABLES];
-
-void
-acpi_table_print (
- struct acpi_table_header *header,
- unsigned long phys_addr)
-{
- char *name = NULL;
+static unsigned long sdt_pa; /* Physical Address */
+static unsigned long sdt_count; /* Table count */
+
+static struct acpi_table_sdt sdt_entry[ACPI_MAX_TABLES];
+
+void acpi_table_print(struct acpi_table_header *header, unsigned long
phys_addr)
+{
+ char *name = NULL;
if (!header)
return;
/* Some table signatures aren't good table names */
- if (!strncmp((char *) &header->signature,
- acpi_table_signatures[ACPI_APIC],
- sizeof(header->signature))) {
+ if (!strncmp((char *)&header->signature,
+ acpi_table_signatures[ACPI_APIC],
+ sizeof(header->signature))) {
name = "MADT";
- }
- else if (!strncmp((char *) &header->signature,
- acpi_table_signatures[ACPI_FADT],
- sizeof(header->signature))) {
+ } else if (!strncmp((char *)&header->signature,
+ acpi_table_signatures[ACPI_FADT],
+ sizeof(header->signature))) {
name = "FADT";
- }
- else
+ } else
name = header->signature;
- printk(KERN_DEBUG PREFIX "%.4s (v%3.3d %6.6s %8.8s 0x%08x %.4s 0x%08x)
@ 0x%p\n",
- name, header->revision, header->oem_id,
- header->oem_table_id, header->oem_revision,
- header->asl_compiler_id, header->asl_compiler_revision,
- (void *) phys_addr);
-}
-
-
-void
-acpi_table_print_madt_entry (
- acpi_table_entry_header *header)
+ printk(KERN_DEBUG PREFIX
+ "%.4s (v%3.3d %6.6s %8.8s 0x%08x %.4s 0x%08x) @ 0x%p\n", name,
+ header->revision, header->oem_id, header->oem_table_id,
+ header->oem_revision, header->asl_compiler_id,
+ header->asl_compiler_revision, (void *)phys_addr);
+}
+
+void acpi_table_print_madt_entry(acpi_table_entry_header * header)
{
if (!header)
return;
@@ -119,113 +111,127 @@
switch (header->type) {
case ACPI_MADT_LAPIC:
- {
- struct acpi_table_lapic *p =
- (struct acpi_table_lapic*) header;
- printk(KERN_INFO PREFIX "LAPIC (acpi_id[0x%02x]
lapic_id[0x%02x] %s)\n",
- p->acpi_id, p->id,
p->flags.enabled?"enabled":"disabled");
- }
+ {
+ struct acpi_table_lapic *p =
+ (struct acpi_table_lapic *)header;
+ printk(KERN_INFO PREFIX
+ "LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
+ p->acpi_id, p->id,
+ p->flags.enabled ? "enabled" : "disabled");
+ }
break;
case ACPI_MADT_IOAPIC:
- {
- struct acpi_table_ioapic *p =
- (struct acpi_table_ioapic*) header;
- printk(KERN_INFO PREFIX "IOAPIC (id[0x%02x] address[0x%08x]
gsi_base[%d])\n",
- p->id, p->address, p->global_irq_base);
- }
+ {
+ struct acpi_table_ioapic *p =
+ (struct acpi_table_ioapic *)header;
+ printk(KERN_INFO PREFIX
+ "IOAPIC (id[0x%02x] address[0x%08x]
gsi_base[%d])\n",
+ p->id, p->address, p->global_irq_base);
+ }
break;
case ACPI_MADT_INT_SRC_OVR:
- {
- struct acpi_table_int_src_ovr *p =
- (struct acpi_table_int_src_ovr*) header;
- printk(KERN_INFO PREFIX "INT_SRC_OVR (bus %d bus_irq %d
global_irq %d %s %s)\n",
- p->bus, p->bus_irq, p->global_irq,
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger]);
- if(p->flags.reserved)
- printk(KERN_INFO PREFIX "INT_SRC_OVR unexpected
reserved flags: 0x%x\n",
- p->flags.reserved);
-
- }
+ {
+ struct acpi_table_int_src_ovr *p =
+ (struct acpi_table_int_src_ovr *)header;
+ printk(KERN_INFO PREFIX
+ "INT_SRC_OVR (bus %d bus_irq %d global_irq %d %s
%s)\n",
+ p->bus, p->bus_irq, p->global_irq,
+ mps_inti_flags_polarity[p->flags.polarity],
+ mps_inti_flags_trigger[p->flags.trigger]);
+ if (p->flags.reserved)
+ printk(KERN_INFO PREFIX
+ "INT_SRC_OVR unexpected reserved flags:
0x%x\n",
+ p->flags.reserved);
+
+ }
break;
case ACPI_MADT_NMI_SRC:
- {
- struct acpi_table_nmi_src *p =
- (struct acpi_table_nmi_src*) header;
- printk(KERN_INFO PREFIX "NMI_SRC (%s %s global_irq %d)\n",
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger],
p->global_irq);
- }
+ {
+ struct acpi_table_nmi_src *p =
+ (struct acpi_table_nmi_src *)header;
+ printk(KERN_INFO PREFIX
+ "NMI_SRC (%s %s global_irq %d)\n",
+ mps_inti_flags_polarity[p->flags.polarity],
+ mps_inti_flags_trigger[p->flags.trigger],
+ p->global_irq);
+ }
break;
case ACPI_MADT_LAPIC_NMI:
- {
- struct acpi_table_lapic_nmi *p =
- (struct acpi_table_lapic_nmi*) header;
- printk(KERN_INFO PREFIX "LAPIC_NMI (acpi_id[0x%02x] %s %s
lint[0x%x])\n",
- p->acpi_id,
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger], p->lint);
- }
+ {
+ struct acpi_table_lapic_nmi *p =
+ (struct acpi_table_lapic_nmi *)header;
+ printk(KERN_INFO PREFIX
+ "LAPIC_NMI (acpi_id[0x%02x] %s %s lint[0x%x])\n",
+ p->acpi_id,
+ mps_inti_flags_polarity[p->flags.polarity],
+ mps_inti_flags_trigger[p->flags.trigger],
+ p->lint);
+ }
break;
case ACPI_MADT_LAPIC_ADDR_OVR:
- {
- struct acpi_table_lapic_addr_ovr *p =
- (struct acpi_table_lapic_addr_ovr*) header;
- printk(KERN_INFO PREFIX "LAPIC_ADDR_OVR (address[%p])\n",
- (void *) (unsigned long) p->address);
- }
+ {
+ struct acpi_table_lapic_addr_ovr *p =
+ (struct acpi_table_lapic_addr_ovr *)header;
+ printk(KERN_INFO PREFIX
+ "LAPIC_ADDR_OVR (address[%p])\n",
+ (void *)(unsigned long)p->address);
+ }
break;
case ACPI_MADT_IOSAPIC:
- {
- struct acpi_table_iosapic *p =
- (struct acpi_table_iosapic*) header;
- printk(KERN_INFO PREFIX "IOSAPIC (id[0x%x] address[%p]
gsi_base[%d])\n",
- p->id, (void *) (unsigned long) p->address,
p->global_irq_base);
- }
+ {
+ struct acpi_table_iosapic *p =
+ (struct acpi_table_iosapic *)header;
+ printk(KERN_INFO PREFIX
+ "IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n",
+ p->id, (void *)(unsigned long)p->address,
+ p->global_irq_base);
+ }
break;
case ACPI_MADT_LSAPIC:
- {
- struct acpi_table_lsapic *p =
- (struct acpi_table_lsapic*) header;
- printk(KERN_INFO PREFIX "LSAPIC (acpi_id[0x%02x]
lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n",
- p->acpi_id, p->id, p->eid,
p->flags.enabled?"enabled":"disabled");
- }
+ {
+ struct acpi_table_lsapic *p =
+ (struct acpi_table_lsapic *)header;
+ printk(KERN_INFO PREFIX
+ "LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x]
lsapic_eid[0x%02x] %s)\n",
+ p->acpi_id, p->id, p->eid,
+ p->flags.enabled ? "enabled" : "disabled");
+ }
break;
case ACPI_MADT_PLAT_INT_SRC:
- {
- struct acpi_table_plat_int_src *p =
- (struct acpi_table_plat_int_src*) header;
- printk(KERN_INFO PREFIX "PLAT_INT_SRC (%s %s type[0x%x]
id[0x%04x] eid[0x%x] iosapic_vector[0x%x] global_irq[0x%x]\n",
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger],
- p->type, p->id, p->eid, p->iosapic_vector,
p->global_irq);
- }
+ {
+ struct acpi_table_plat_int_src *p =
+ (struct acpi_table_plat_int_src *)header;
+ printk(KERN_INFO PREFIX
+ "PLAT_INT_SRC (%s %s type[0x%x] id[0x%04x]
eid[0x%x] iosapic_vector[0x%x] global_irq[0x%x]\n",
+ mps_inti_flags_polarity[p->flags.polarity],
+ mps_inti_flags_trigger[p->flags.trigger],
+ p->type, p->id, p->eid, p->iosapic_vector,
+ p->global_irq);
+ }
break;
default:
- printk(KERN_WARNING PREFIX "Found unsupported MADT entry (type
= 0x%x)\n",
- header->type);
- break;
- }
-}
-
+ printk(KERN_WARNING PREFIX
+ "Found unsupported MADT entry (type = 0x%x)\n",
+ header->type);
+ break;
+ }
+}
static int
-acpi_table_compute_checksum (
- void *table_pointer,
- unsigned long length)
-{
- u8 *p = (u8 *) table_pointer;
- unsigned long remains = length;
- unsigned long sum = 0;
+acpi_table_compute_checksum(void *table_pointer, unsigned long length)
+{
+ u8 *p = (u8 *) table_pointer;
+ unsigned long remains = length;
+ unsigned long sum = 0;
if (!p || !length)
return -EINVAL;
@@ -241,9 +247,8 @@
* for acpi_blacklisted(), acpi_table_get_sdt()
*/
int __init
-acpi_get_table_header_early (
- enum acpi_table_id id,
- struct acpi_table_header **header)
+acpi_get_table_header_early(enum acpi_table_id id,
+ struct acpi_table_header **header)
{
unsigned int i;
enum acpi_table_id temp_id;
@@ -260,7 +265,7 @@
if (sdt_entry[i].id != temp_id)
continue;
*header = (void *)
- __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
+ __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
if (!*header) {
printk(KERN_WARNING PREFIX "Unable to map %s\n",
acpi_table_signatures[temp_id]);
@@ -277,14 +282,17 @@
/* Map the DSDT header via the pointer in the FADT */
if (id == ACPI_DSDT) {
- struct fadt_descriptor_rev2 *fadt = (struct
fadt_descriptor_rev2 *) *header;
+ struct fadt_descriptor_rev2 *fadt =
+ (struct fadt_descriptor_rev2 *)*header;
if (fadt->revision == 3 && fadt->Xdsdt) {
- *header = (void *) __acpi_map_table(fadt->Xdsdt,
- sizeof(struct acpi_table_header));
+ *header = (void *)__acpi_map_table(fadt->Xdsdt,
+ sizeof(struct
+
acpi_table_header));
} else if (fadt->V1_dsdt) {
- *header = (void *) __acpi_map_table(fadt->V1_dsdt,
- sizeof(struct acpi_table_header));
+ *header = (void *)__acpi_map_table(fadt->V1_dsdt,
+ sizeof(struct
+
acpi_table_header));
} else
*header = NULL;
@@ -296,21 +304,19 @@
return 0;
}
-
int __init
-acpi_table_parse_madt_family (
- enum acpi_table_id id,
- unsigned long madt_size,
- int entry_id,
- acpi_madt_entry_handler handler,
- unsigned int max_entries)
-{
- void *madt = NULL;
- acpi_table_entry_header *entry;
- unsigned int count = 0;
- unsigned long madt_end;
- unsigned int i;
+acpi_table_parse_madt_family(enum acpi_table_id id,
+ unsigned long madt_size,
+ int entry_id,
+ acpi_madt_entry_handler handler,
+ unsigned int max_entries)
+{
+ void *madt = NULL;
+ acpi_table_entry_header *entry;
+ unsigned int count = 0;
+ unsigned long madt_end;
+ unsigned int i;
if (!handler)
return -EINVAL;
@@ -321,7 +327,7 @@
if (sdt_entry[i].id != id)
continue;
madt = (void *)
- __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
+ __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
if (!madt) {
printk(KERN_WARNING PREFIX "Unable to map %s\n",
acpi_table_signatures[id]);
@@ -336,21 +342,22 @@
return -ENODEV;
}
- madt_end = (unsigned long) madt + sdt_entry[i].size;
+ madt_end = (unsigned long)madt + sdt_entry[i].size;
/* Parse all entries looking for a match. */
entry = (acpi_table_entry_header *)
- ((unsigned long) madt + madt_size);
-
- while (((unsigned long) entry) + sizeof(acpi_table_entry_header) <
madt_end) {
- if (entry->type == entry_id &&
- (!max_entries || count++ < max_entries))
+ ((unsigned long)madt + madt_size);
+
+ while (((unsigned long)entry) + sizeof(acpi_table_entry_header) <
+ madt_end) {
+ if (entry->type == entry_id
+ && (!max_entries || count++ < max_entries))
if (handler(entry, madt_end))
return -EINVAL;
entry = (acpi_table_entry_header *)
- ((unsigned long) entry + entry->length);
+ ((unsigned long)entry + entry->length);
}
if (max_entries && count > max_entries) {
printk(KERN_WARNING PREFIX "[%s:0x%02x] ignored %i entries of "
@@ -361,25 +368,19 @@
return count;
}
-
int __init
-acpi_table_parse_madt (
- enum acpi_madt_entry_id id,
- acpi_madt_entry_handler handler,
- unsigned int max_entries)
-{
- return acpi_table_parse_madt_family(ACPI_APIC, sizeof(struct
acpi_table_madt),
- id, handler, max_entries);
-}
-
-
-int __init
-acpi_table_parse (
- enum acpi_table_id id,
- acpi_table_handler handler)
-{
- int count = 0;
- unsigned int i = 0;
+acpi_table_parse_madt(enum acpi_madt_entry_id id,
+ acpi_madt_entry_handler handler, unsigned int max_entries)
+{
+ return acpi_table_parse_madt_family(ACPI_APIC,
+ sizeof(struct acpi_table_madt), id,
+ handler, max_entries);
+}
+
+int __init acpi_table_parse(enum acpi_table_id id, acpi_table_handler handler)
+{
+ int count = 0;
+ unsigned int i = 0;
if (!handler)
return -EINVAL;
@@ -392,20 +393,18 @@
handler(sdt_entry[i].pa, sdt_entry[i].size);
else
- printk(KERN_WARNING PREFIX "%d duplicate %s table
ignored.\n",
- count, acpi_table_signatures[id]);
+ printk(KERN_WARNING PREFIX
+ "%d duplicate %s table ignored.\n", count,
+ acpi_table_signatures[id]);
}
return count;
}
-
-static int __init
-acpi_table_get_sdt (
- struct acpi_table_rsdp *rsdp)
+static int __init acpi_table_get_sdt(struct acpi_table_rsdp *rsdp)
{
struct acpi_table_header *header = NULL;
- unsigned int i, id = 0;
+ unsigned int i, id = 0;
if (!rsdp)
return -EINVAL;
@@ -413,24 +412,25 @@
/* First check XSDT (but only on ACPI 2.0-compatible systems) */
if ((rsdp->revision >= 2) &&
- (((struct acpi20_table_rsdp*)rsdp)->xsdt_address)) {
-
- struct acpi_table_xsdt *mapped_xsdt = NULL;
-
- sdt_pa = ((struct acpi20_table_rsdp*)rsdp)->xsdt_address;
+ (((struct acpi20_table_rsdp *)rsdp)->xsdt_address)) {
+
+ struct acpi_table_xsdt *mapped_xsdt = NULL;
+
+ sdt_pa = ((struct acpi20_table_rsdp *)rsdp)->xsdt_address;
/* map in just the header */
header = (struct acpi_table_header *)
- __acpi_map_table(sdt_pa, sizeof(struct
acpi_table_header));
+ __acpi_map_table(sdt_pa, sizeof(struct acpi_table_header));
if (!header) {
- printk(KERN_WARNING PREFIX "Unable to map XSDT
header\n");
+ printk(KERN_WARNING PREFIX
+ "Unable to map XSDT header\n");
return -ENODEV;
}
/* remap in the entire table before processing */
mapped_xsdt = (struct acpi_table_xsdt *)
- __acpi_map_table(sdt_pa, header->length);
+ __acpi_map_table(sdt_pa, header->length);
if (!mapped_xsdt) {
printk(KERN_WARNING PREFIX "Unable to map XSDT\n");
return -ENODEV;
@@ -438,7 +438,8 @@
header = &mapped_xsdt->header;
if (strncmp(header->signature, "XSDT", 4)) {
- printk(KERN_WARNING PREFIX "XSDT signature
incorrect\n");
+ printk(KERN_WARNING PREFIX
+ "XSDT signature incorrect\n");
return -ENODEV;
}
@@ -447,36 +448,39 @@
return -ENODEV;
}
- sdt_count = (header->length - sizeof(struct acpi_table_header))
>> 3;
+ sdt_count =
+ (header->length - sizeof(struct acpi_table_header)) >> 3;
if (sdt_count > ACPI_MAX_TABLES) {
- printk(KERN_WARNING PREFIX "Truncated %lu XSDT
entries\n",
- (sdt_count - ACPI_MAX_TABLES));
+ printk(KERN_WARNING PREFIX
+ "Truncated %lu XSDT entries\n",
+ (sdt_count - ACPI_MAX_TABLES));
sdt_count = ACPI_MAX_TABLES;
}
for (i = 0; i < sdt_count; i++)
- sdt_entry[i].pa = (unsigned long) mapped_xsdt->entry[i];
+ sdt_entry[i].pa = (unsigned long)mapped_xsdt->entry[i];
}
/* Then check RSDT */
else if (rsdp->rsdt_address) {
- struct acpi_table_rsdt *mapped_rsdt = NULL;
+ struct acpi_table_rsdt *mapped_rsdt = NULL;
sdt_pa = rsdp->rsdt_address;
/* map in just the header */
header = (struct acpi_table_header *)
- __acpi_map_table(sdt_pa, sizeof(struct
acpi_table_header));
+ __acpi_map_table(sdt_pa, sizeof(struct acpi_table_header));
if (!header) {
- printk(KERN_WARNING PREFIX "Unable to map RSDT
header\n");
+ printk(KERN_WARNING PREFIX
+ "Unable to map RSDT header\n");
return -ENODEV;
}
/* remap in the entire table before processing */
mapped_rsdt = (struct acpi_table_rsdt *)
- __acpi_map_table(sdt_pa, header->length);
+ __acpi_map_table(sdt_pa, header->length);
if (!mapped_rsdt) {
printk(KERN_WARNING PREFIX "Unable to map RSDT\n");
return -ENODEV;
@@ -484,7 +488,8 @@
header = &mapped_rsdt->header;
if (strncmp(header->signature, "RSDT", 4)) {
- printk(KERN_WARNING PREFIX "RSDT signature
incorrect\n");
+ printk(KERN_WARNING PREFIX
+ "RSDT signature incorrect\n");
return -ENODEV;
}
@@ -493,19 +498,22 @@
return -ENODEV;
}
- sdt_count = (header->length - sizeof(struct acpi_table_header))
>> 2;
+ sdt_count =
+ (header->length - sizeof(struct acpi_table_header)) >> 2;
if (sdt_count > ACPI_MAX_TABLES) {
- printk(KERN_WARNING PREFIX "Truncated %lu RSDT
entries\n",
- (sdt_count - ACPI_MAX_TABLES));
+ printk(KERN_WARNING PREFIX
+ "Truncated %lu RSDT entries\n",
+ (sdt_count - ACPI_MAX_TABLES));
sdt_count = ACPI_MAX_TABLES;
}
for (i = 0; i < sdt_count; i++)
- sdt_entry[i].pa = (unsigned long) mapped_rsdt->entry[i];
+ sdt_entry[i].pa = (unsigned long)mapped_rsdt->entry[i];
}
else {
- printk(KERN_WARNING PREFIX "No System Description Table
(RSDT/XSDT) specified in RSDP\n");
+ printk(KERN_WARNING PREFIX
+ "No System Description Table (RSDT/XSDT) specified in
RSDP\n");
return -ENODEV;
}
@@ -515,18 +523,17 @@
/* map in just the header */
header = (struct acpi_table_header *)
- __acpi_map_table(sdt_entry[i].pa,
- sizeof(struct acpi_table_header));
+ __acpi_map_table(sdt_entry[i].pa,
+ sizeof(struct acpi_table_header));
if (!header)
continue;
/* remap in the entire table before processing */
header = (struct acpi_table_header *)
- __acpi_map_table(sdt_entry[i].pa,
- header->length);
+ __acpi_map_table(sdt_entry[i].pa, header->length);
if (!header)
continue;
-
+
acpi_table_print(header, sdt_entry[i].pa);
if (acpi_table_compute_checksum(header, header->length)) {
@@ -537,9 +544,9 @@
sdt_entry[i].size = header->length;
for (id = 0; id < ACPI_TABLE_COUNT; id++) {
- if (!strncmp((char *) &header->signature,
- acpi_table_signatures[id],
- sizeof(header->signature))) {
+ if (!strncmp((char *)&header->signature,
+ acpi_table_signatures[id],
+ sizeof(header->signature))) {
sdt_entry[i].id = id;
}
}
@@ -551,7 +558,7 @@
* against. Unfortunately, we don't know the phys_addr, so just
* print 0. Maybe no one will notice.
*/
- if(!acpi_get_table_header_early(ACPI_DSDT, &header))
+ if (!acpi_get_table_header_early(ACPI_DSDT, &header))
acpi_table_print(header, 0);
return 0;
@@ -571,12 +578,11 @@
#define acpi_rsdp_phys_to_va(rsdp_phys) __va(rsdp_phys)
#endif
-int __init
-acpi_table_init (void)
-{
- struct acpi_table_rsdp *rsdp = NULL;
- unsigned long rsdp_phys = 0;
- int result = 0;
+int __init acpi_table_init(void)
+{
+ struct acpi_table_rsdp *rsdp = NULL;
+ unsigned long rsdp_phys = 0;
+ int result = 0;
/* Locate and map the Root System Description Table (RSDP) */
@@ -586,19 +592,25 @@
return -ENODEV;
}
- rsdp = (struct acpi_table_rsdp *) acpi_rsdp_phys_to_va(rsdp_phys);
+ rsdp = (struct acpi_table_rsdp *)acpi_rsdp_phys_to_va(rsdp_phys);
if (!rsdp) {
printk(KERN_WARNING PREFIX "Unable to map RSDP\n");
return -ENODEV;
}
- printk(KERN_DEBUG PREFIX "RSDP (v%3.3d %6.6s
) @ 0x%p\n",
- rsdp->revision, rsdp->oem_id, (void *) rsdp_phys);
+ printk(KERN_DEBUG PREFIX
+ "RSDP (v%3.3d %6.6s ) @ 0x%p\n",
+ rsdp->revision, rsdp->oem_id, (void *)rsdp_phys);
if (rsdp->revision < 2)
- result = acpi_table_compute_checksum(rsdp, sizeof(struct
acpi_table_rsdp));
+ result =
+ acpi_table_compute_checksum(rsdp,
+ sizeof(struct acpi_table_rsdp));
else
- result = acpi_table_compute_checksum(rsdp, ((struct
acpi20_table_rsdp *)rsdp)->length);
+ result =
+ acpi_table_compute_checksum(rsdp,
+ ((struct acpi20_table_rsdp *)
+ rsdp)->length);
if (result) {
printk(KERN_WARNING " >>> ERROR: Invalid checksum\n");
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/char/mem.c
--- a/linux-2.6-xen-sparse/drivers/char/mem.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/mem.c Tue Jan 31 19:55:22 2006
@@ -23,17 +23,16 @@
#include <linux/devfs_fs_kernel.h>
#include <linux/ptrace.h>
#include <linux/device.h>
+#include <linux/highmem.h>
+#include <linux/crash_dump.h>
#include <linux/backing-dev.h>
+#include <linux/bootmem.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#ifdef CONFIG_IA64
# include <linux/efi.h>
-#endif
-
-#if defined(CONFIG_S390_TAPE) && defined(CONFIG_S390_TAPE_CHAR)
-extern void tapechar_init(void);
#endif
/*
@@ -260,7 +259,11 @@
static int mmap_kmem(struct file * file, struct vm_area_struct * vma)
{
- unsigned long long val;
+ unsigned long pfn;
+
+ /* Turn a kernel-virtual address into a physical page frame */
+ pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
+
/*
* RED-PEN: on some architectures there is more mapped memory
* than available in mem_map which pfn_valid checks
@@ -268,12 +271,46 @@
*
* RED-PEN: vmalloc is not supported right now.
*/
- if (!pfn_valid(vma->vm_pgoff))
+ if (!pfn_valid(pfn))
return -EIO;
- val = (u64)vma->vm_pgoff << PAGE_SHIFT;
- vma->vm_pgoff = __pa(val) >> PAGE_SHIFT;
+
+ vma->vm_pgoff = pfn;
return mmap_mem(file, vma);
}
+
+#ifdef CONFIG_CRASH_DUMP
+/*
+ * Read memory corresponding to the old kernel.
+ */
+static ssize_t read_oldmem(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ unsigned long pfn, offset;
+ size_t read = 0, csize;
+ int rc = 0;
+
+ while (count) {
+ pfn = *ppos / PAGE_SIZE;
+ if (pfn > saved_max_pfn)
+ return read;
+
+ offset = (unsigned long)(*ppos % PAGE_SIZE);
+ if (count > PAGE_SIZE - offset)
+ csize = PAGE_SIZE - offset;
+ else
+ csize = count;
+
+ rc = copy_oldmem_page(pfn, buf, csize, offset, 1);
+ if (rc < 0)
+ return rc;
+ buf += csize;
+ *ppos += csize;
+ read += csize;
+ count -= csize;
+ }
+ return read;
+}
+#endif
extern long vread(char *buf, char *addr, unsigned long count);
extern long vwrite(char *buf, char *addr, unsigned long count);
@@ -486,7 +523,7 @@
return virtr + wrote;
}
-#if defined(CONFIG_ISA) || !defined(__mc68000__)
+#if (defined(CONFIG_ISA) || !defined(__mc68000__)) &&
(!defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI))
static ssize_t read_port(struct file * file, char __user * buf,
size_t count, loff_t *ppos)
{
@@ -723,6 +760,7 @@
#define read_full read_zero
#define open_mem open_port
#define open_kmem open_mem
+#define open_oldmem open_mem
#ifndef ARCH_HAS_DEV_MEM
static struct file_operations mem_fops = {
@@ -750,7 +788,7 @@
.write = write_null,
};
-#if defined(CONFIG_ISA) || !defined(__mc68000__)
+#if (defined(CONFIG_ISA) || !defined(__mc68000__)) &&
(!defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI))
static struct file_operations port_fops = {
.llseek = memory_lseek,
.read = read_port,
@@ -775,6 +813,13 @@
.read = read_full,
.write = write_full,
};
+
+#ifdef CONFIG_CRASH_DUMP
+static struct file_operations oldmem_fops = {
+ .read = read_oldmem,
+ .open = open_oldmem,
+};
+#endif
static ssize_t kmsg_write(struct file * file, const char __user * buf,
size_t count, loff_t *ppos)
@@ -810,7 +855,7 @@
case 3:
filp->f_op = &null_fops;
break;
-#if defined(CONFIG_ISA) || !defined(__mc68000__)
+#if (defined(CONFIG_ISA) || !defined(__mc68000__)) &&
(!defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI))
case 4:
filp->f_op = &port_fops;
break;
@@ -831,6 +876,11 @@
case 11:
filp->f_op = &kmsg_fops;
break;
+#ifdef CONFIG_CRASH_DUMP
+ case 12:
+ filp->f_op = &oldmem_fops;
+ break;
+#endif
default:
return -ENXIO;
}
@@ -852,7 +902,7 @@
{1, "mem", S_IRUSR | S_IWUSR | S_IRGRP, &mem_fops},
{2, "kmem", S_IRUSR | S_IWUSR | S_IRGRP, &kmem_fops},
{3, "null", S_IRUGO | S_IWUGO, &null_fops},
-#if defined(CONFIG_ISA) || !defined(__mc68000__)
+#if (defined(CONFIG_ISA) || !defined(__mc68000__)) &&
(!defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI))
{4, "port", S_IRUSR | S_IWUSR | S_IRGRP, &port_fops},
#endif
{5, "zero", S_IRUGO | S_IWUGO, &zero_fops},
@@ -860,9 +910,12 @@
{8, "random", S_IRUGO | S_IWUSR, &random_fops},
{9, "urandom", S_IRUGO | S_IWUSR, &urandom_fops},
{11,"kmsg", S_IRUGO | S_IWUSR, &kmsg_fops},
-};
-
-static struct class_simple *mem_class;
+#ifdef CONFIG_CRASH_DUMP
+ {12,"oldmem", S_IRUSR | S_IWUSR | S_IRGRP, &oldmem_fops},
+#endif
+};
+
+static struct class *mem_class;
static int __init chr_dev_init(void)
{
@@ -871,10 +924,9 @@
if (register_chrdev(MEM_MAJOR,"mem",&memory_fops))
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
- mem_class = class_simple_create(THIS_MODULE, "mem");
+ mem_class = class_create(THIS_MODULE, "mem");
for (i = 0; i < ARRAY_SIZE(devlist); i++) {
- class_simple_device_add(mem_class,
- MKDEV(MEM_MAJOR, devlist[i].minor),
+ class_device_create(mem_class, MKDEV(MEM_MAJOR,
devlist[i].minor),
NULL, devlist[i].name);
devfs_mk_cdev(MKDEV(MEM_MAJOR, devlist[i].minor),
S_IFCHR | devlist[i].mode, devlist[i].name);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/char/tpm/Kconfig
--- a/linux-2.6-xen-sparse/drivers/char/tpm/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tpm/Kconfig Tue Jan 31 19:55:22 2006
@@ -17,6 +17,8 @@
obtained at: <http://sourceforge.net/projects/trousers>. To
compile this driver as a module, choose M here; the module
will be called tpm. If unsure, say N.
+ Note: For more TPM drivers enable CONFIG_PNP, CONFIG_ACPI
+ and CONFIG_PNPACPI.
config TCG_NSC
tristate "National Semiconductor TPM Interface"
@@ -35,6 +37,18 @@
will be accessible from within Linux. To compile this driver
as a module, choose M here; the module will be called tpm_atmel.
+config TCG_INFINEON
+ tristate "Infineon Technologies TPM Interface"
+ depends on TCG_TPM && PNPACPI
+ ---help---
+ If you have a TPM security chip from Infineon Technologies
+ (either SLD 9630 TT 1.1 or SLB 9635 TT 1.2) say Yes and it
+ will be accessible from within Linux.
+ To compile this driver as a module, choose M here; the module
+ will be called tpm_infineon.
+ Further information on this driver and the supported hardware
+ can be found at http://www.prosec.rub.de/tpm
+
config TCG_XEN
tristate "XEN TPM Interface"
depends on TCG_TPM && XEN && XEN_TPMDEV_FRONTEND
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/char/tpm/Makefile
--- a/linux-2.6-xen-sparse/drivers/char/tpm/Makefile Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tpm/Makefile Tue Jan 31 19:55:22 2006
@@ -4,4 +4,5 @@
obj-$(CONFIG_TCG_TPM) += tpm.o
obj-$(CONFIG_TCG_NSC) += tpm_nsc.o
obj-$(CONFIG_TCG_ATMEL) += tpm_atmel.o
+obj-$(CONFIG_TCG_INFINEON) += tpm_infineon.o
obj-$(CONFIG_TCG_XEN) += tpm_xen.o
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/char/tpm/tpm.c
--- a/linux-2.6-xen-sparse/drivers/char/tpm/tpm.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tpm/tpm.c Tue Jan 31 19:55:22 2006
@@ -66,9 +66,6 @@
if (!chip)
return -ENODEV;
- if ( !chip )
- return -ENODEV;
-
count = be32_to_cpu(*((__be32 *) (buf + 2)));
if (count == 0)
@@ -140,13 +137,8 @@
0, 0, 0, 0 /* PCR index */
};
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)
ssize_t tpm_show_pcrs(struct device *dev, struct device_attribute *attr,
char *buf)
-#else
-ssize_t tpm_show_pcrs(struct device *dev,
- char *buf)
-#endif
{
u8 data[READ_PCR_RESULT_SIZE];
ssize_t len;
@@ -154,7 +146,8 @@
__be32 index;
char *str = buf;
- struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct tpm_chip *chip =
+ pci_get_drvdata(to_pci_dev(dev));
if (chip == NULL)
return -ENODEV;
@@ -197,20 +190,16 @@
0, 0, 0, 124, /* TPM_ORD_ReadPubek */
};
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)
ssize_t tpm_show_pubek(struct device *dev, struct device_attribute *attr,
char *buf)
-#else
-ssize_t tpm_show_pubek(struct device *dev,
- char *buf)
-#endif
{
u8 *data;
ssize_t len;
int i, rc;
char *str = buf;
- struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct tpm_chip *chip =
+ pci_get_drvdata(to_pci_dev(dev));
if (chip == NULL)
return -ENODEV;
@@ -285,19 +274,15 @@
0, 0, 1, 3
};
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)
ssize_t tpm_show_caps(struct device *dev, struct device_attribute *attr,
char *buf)
-#else
-ssize_t tpm_show_caps(struct device *dev,
- char *buf)
-#endif
{
u8 data[sizeof(cap_manufacturer)];
ssize_t len;
char *str = buf;
- struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct tpm_chip *chip =
+ pci_get_drvdata(to_pci_dev(dev));
if (chip == NULL)
return -ENODEV;
@@ -325,13 +310,8 @@
}
EXPORT_SYMBOL_GPL(tpm_show_caps);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)
ssize_t tpm_store_cancel(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
-#else
-ssize_t tpm_store_cancel(struct device *dev,
- const char *buf, size_t count)
-#endif
{
struct tpm_chip *chip = dev_get_drvdata(dev);
if (chip == NULL)
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/char/tpm/tpm.h
--- a/linux-2.6-xen-sparse/drivers/char/tpm/tpm.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tpm/tpm.h Tue Jan 31 19:55:22 2006
@@ -35,7 +35,6 @@
TPM_ADDR = 0x4E,
};
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13)
extern ssize_t tpm_show_pubek(struct device *, struct device_attribute *attr,
char *);
extern ssize_t tpm_show_pcrs(struct device *, struct device_attribute *attr,
@@ -44,16 +43,6 @@
char *);
extern ssize_t tpm_store_cancel(struct device *, struct device_attribute *attr,
const char *, size_t);
-#else
-extern ssize_t tpm_show_pubek(struct device *,
- char *);
-extern ssize_t tpm_show_pcrs(struct device *,
- char *);
-extern ssize_t tpm_show_caps(struct device *,
- char *);
-extern ssize_t tpm_store_cancel(struct device *,
- const char *, size_t);
-#endif
struct tpm_chip;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/char/tpm/tpm_atmel.c
--- a/linux-2.6-xen-sparse/drivers/char/tpm/tpm_atmel.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tpm/tpm_atmel.c Tue Jan 31 19:55:22 2006
@@ -224,11 +224,6 @@
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1)},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0)},
{PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_LPC)},
-#ifndef PCI_DEVICE_ID_SERVERWORKS_CSB6LPC
-#define PCI_DEVICE_ID_SERVERWORKS_CSB6LPC 0x0227
-#else
-#warning Remove the define of PCI_DEVICE_ID_SERVERWORKS_CSB6LPC
-#endif
{PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_CSB6LPC)},
{0,}
};
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/char/tty_io.c
--- a/linux-2.6-xen-sparse/drivers/char/tty_io.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/char/tty_io.c Tue Jan 31 19:55:22 2006
@@ -94,6 +94,7 @@
#include <linux/idr.h>
#include <linux/wait.h>
#include <linux/bitops.h>
+#include <linux/delay.h>
#include <asm/uaccess.h>
#include <asm/system.h>
@@ -154,7 +155,6 @@
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg);
static int tty_fasync(int fd, struct file * filp, int on);
-extern void rs_360_init(void);
static void release_mem(struct tty_struct *tty, int idx);
@@ -253,7 +253,7 @@
static DEFINE_SPINLOCK(tty_ldisc_lock);
static DECLARE_WAIT_QUEUE_HEAD(tty_ldisc_wait);
-static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table
*/
+static struct tty_ldisc tty_ldiscs[NR_LDISCS]; /* line disc dispatch table */
int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
{
@@ -264,23 +264,34 @@
return -EINVAL;
spin_lock_irqsave(&tty_ldisc_lock, flags);
- if (new_ldisc) {
- tty_ldiscs[disc] = *new_ldisc;
- tty_ldiscs[disc].num = disc;
- tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
- tty_ldiscs[disc].refcount = 0;
- } else {
- if(tty_ldiscs[disc].refcount)
- ret = -EBUSY;
- else
- tty_ldiscs[disc].flags &= ~LDISC_FLAG_DEFINED;
- }
+ tty_ldiscs[disc] = *new_ldisc;
+ tty_ldiscs[disc].num = disc;
+ tty_ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
+ tty_ldiscs[disc].refcount = 0;
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
return ret;
}
-
EXPORT_SYMBOL(tty_register_ldisc);
+
+int tty_unregister_ldisc(int disc)
+{
+ unsigned long flags;
+ int ret = 0;
+
+ if (disc < N_TTY || disc >= NR_LDISCS)
+ return -EINVAL;
+
+ spin_lock_irqsave(&tty_ldisc_lock, flags);
+ if (tty_ldiscs[disc].refcount)
+ ret = -EBUSY;
+ else
+ tty_ldiscs[disc].flags &= ~LDISC_FLAG_DEFINED;
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL(tty_unregister_ldisc);
struct tty_ldisc *tty_ldisc_get(int disc)
{
@@ -460,21 +471,19 @@
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
- int retval = 0;
- struct tty_ldisc o_ldisc;
+ int retval = 0;
+ struct tty_ldisc o_ldisc;
char buf[64];
int work;
unsigned long flags;
struct tty_ldisc *ld;
+ struct tty_struct *o_tty;
if ((ldisc < N_TTY) || (ldisc >= NR_LDISCS))
return -EINVAL;
restart:
- if (tty->ldisc.num == ldisc)
- return 0; /* We are already in the desired discipline */
-
ld = tty_ldisc_get(ldisc);
/* Eduardo Blanco <ejbs@xxxxxxxxxxxx> */
/* Cyrus Durgin <cider@xxxxxxxxxxxxx> */
@@ -485,9 +494,15 @@
if (ld == NULL)
return -EINVAL;
+ tty_wait_until_sent(tty, 0);
+
+ if (tty->ldisc.num == ldisc) {
+ tty_ldisc_put(ldisc);
+ return 0;
+ }
+
o_ldisc = tty->ldisc;
-
- tty_wait_until_sent(tty, 0);
+ o_tty = tty->link;
/*
* Make sure we don't change while someone holds a
@@ -495,35 +510,58 @@
* prevents anyone taking a reference once it is clear.
* We need the lock to avoid racing reference takers.
*/
-
+
spin_lock_irqsave(&tty_ldisc_lock, flags);
- if(tty->ldisc.refcount)
- {
- /* Free the new ldisc we grabbed. Must drop the lock
- first. */
+ if (tty->ldisc.refcount || (o_tty && o_tty->ldisc.refcount)) {
+ if(tty->ldisc.refcount) {
+ /* Free the new ldisc we grabbed. Must drop the lock
+ first. */
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ tty_ldisc_put(ldisc);
+ /*
+ * There are several reasons we may be busy, including
+ * random momentary I/O traffic. We must therefore
+ * retry. We could distinguish between blocking ops
+ * and retries if we made tty_ldisc_wait() smarter. That
+ * is up for discussion.
+ */
+ if (wait_event_interruptible(tty_ldisc_wait,
tty->ldisc.refcount == 0) < 0)
+ return -ERESTARTSYS;
+ goto restart;
+ }
+ if(o_tty && o_tty->ldisc.refcount) {
+ spin_unlock_irqrestore(&tty_ldisc_lock, flags);
+ tty_ldisc_put(ldisc);
+ if (wait_event_interruptible(tty_ldisc_wait,
o_tty->ldisc.refcount == 0) < 0)
+ return -ERESTARTSYS;
+ goto restart;
+ }
+ }
+
+ /* if the TTY_LDISC bit is set, then we are racing against another
ldisc change */
+
+ if (!test_bit(TTY_LDISC, &tty->flags)) {
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
tty_ldisc_put(ldisc);
- /*
- * There are several reasons we may be busy, including
- * random momentary I/O traffic. We must therefore
- * retry. We could distinguish between blocking ops
- * and retries if we made tty_ldisc_wait() smarter. That
- * is up for discussion.
- */
- if(wait_event_interruptible(tty_ldisc_wait, tty->ldisc.refcount
== 0) < 0)
- return -ERESTARTSYS;
+ ld = tty_ldisc_ref_wait(tty);
+ tty_ldisc_deref(ld);
goto restart;
}
- clear_bit(TTY_LDISC, &tty->flags);
+
+ clear_bit(TTY_LDISC, &tty->flags);
clear_bit(TTY_DONT_FLIP, &tty->flags);
+ if (o_tty) {
+ clear_bit(TTY_LDISC, &o_tty->flags);
+ clear_bit(TTY_DONT_FLIP, &o_tty->flags);
+ }
spin_unlock_irqrestore(&tty_ldisc_lock, flags);
-
+
/*
* From this point on we know nobody has an ldisc
* usage reference, nor can they obtain one until
* we say so later on.
*/
-
+
work = cancel_delayed_work(&tty->flip.work);
/*
* Wait for ->hangup_work and ->flip.work handlers to terminate
@@ -574,10 +612,12 @@
*/
tty_ldisc_enable(tty);
+ if (o_tty)
+ tty_ldisc_enable(o_tty);
/* Restart it in case no characters kick it off. Safe if
already running */
- if(work)
+ if (work)
schedule_delayed_work(&tty->flip.work, 1);
return retval;
}
@@ -2171,12 +2211,11 @@
return tty_set_ldisc(tty, ldisc);
}
-static int send_break(struct tty_struct *tty, int duration)
+static int send_break(struct tty_struct *tty, unsigned int duration)
{
tty->driver->break_ctl(tty, -1);
if (!signal_pending(current)) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(duration);
+ msleep_interruptible(duration);
}
tty->driver->break_ctl(tty, 0);
if (signal_pending(current))
@@ -2357,10 +2396,10 @@
* all by anyone?
*/
if (!arg)
- return send_break(tty, HZ/4);
+ return send_break(tty, 250);
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
- return send_break(tty, arg ? arg*(HZ/10) : HZ/4);
+ return send_break(tty, arg ? arg*100 : 250);
case TIOCMGET:
return tty_tiocmget(tty, file, p);
@@ -2417,6 +2456,7 @@
int i;
struct file *filp;
struct tty_ldisc *disc;
+ struct fdtable *fdt;
if (!tty)
return;
@@ -2442,8 +2482,9 @@
}
task_lock(p);
if (p->files) {
- spin_lock(&p->files->file_lock);
- for (i=0; i < p->files->max_fds; i++) {
+ rcu_read_lock();
+ fdt = files_fdtable(p->files);
+ for (i=0; i < fdt->max_fds; i++) {
filp = fcheck_files(p->files, i);
if (!filp)
continue;
@@ -2456,7 +2497,7 @@
break;
}
}
- spin_unlock(&p->files->file_lock);
+ rcu_read_unlock();
}
task_unlock(p);
} while_each_task_pid(session, PIDTYPE_SID, p);
@@ -2656,7 +2697,7 @@
tty->driver->write(tty, &ch, 1);
}
-static struct class_simple *tty_class;
+static struct class *tty_class;
/**
* tty_register_device - register a tty device
@@ -2689,7 +2730,7 @@
pty_line_name(driver, index, name);
else
tty_line_name(driver, index, name);
- class_simple_device_add(tty_class, dev, device, name);
+ class_device_create(tty_class, dev, device, name);
}
/**
@@ -2703,7 +2744,7 @@
void tty_unregister_device(struct tty_driver *driver, unsigned index)
{
devfs_remove("%s%d", driver->devfs_name, index + driver->name_base);
- class_simple_device_remove(MKDEV(driver->major, driver->minor_start) +
index);
+ class_device_destroy(tty_class, MKDEV(driver->major,
driver->minor_start) + index);
}
EXPORT_SYMBOL(tty_register_device);
@@ -2902,11 +2943,6 @@
#ifdef CONFIG_EARLY_PRINTK
disable_early_printk();
#endif
-#ifdef CONFIG_SERIAL_68360
- /* This is not a console initcall. I know not what it's doing here.
- So I haven't moved it. dwmw2 */
- rs_360_init();
-#endif
call = __con_initcall_start;
while (call < __con_initcall_end) {
(*call)();
@@ -2920,7 +2956,7 @@
static int __init tty_class_init(void)
{
- tty_class = class_simple_create(THIS_MODULE, "tty");
+ tty_class = class_create(THIS_MODULE, "tty");
if (IS_ERR(tty_class))
return PTR_ERR(tty_class);
return 0;
@@ -2949,14 +2985,14 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
panic("Couldn't register /dev/tty driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 0), S_IFCHR|S_IRUGO|S_IWUGO, "tty");
- class_simple_device_add(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
+ class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
cdev_init(&console_cdev, &console_fops);
if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") <
0)
panic("Couldn't register /dev/console driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 1), S_IFCHR|S_IRUSR|S_IWUSR,
"console");
- class_simple_device_add(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL,
"console");
+ class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 1), NULL, "console");
#ifdef CONFIG_UNIX98_PTYS
cdev_init(&ptmx_cdev, &ptmx_fops);
@@ -2964,7 +3000,7 @@
register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0)
panic("Couldn't register /dev/ptmx driver\n");
devfs_mk_cdev(MKDEV(TTYAUX_MAJOR, 2), S_IFCHR|S_IRUGO|S_IWUGO, "ptmx");
- class_simple_device_add(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL,
"ptmx");
+ class_device_create(tty_class, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx");
#endif
#ifdef CONFIG_VT
@@ -2975,7 +3011,7 @@
register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0)
panic("Couldn't register /dev/tty0 driver\n");
devfs_mk_cdev(MKDEV(TTY_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "vc/0");
- class_simple_device_add(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
+ class_device_create(tty_class, MKDEV(TTY_MAJOR, 0), NULL, "tty0");
vty_init();
out_vt:
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/firmware/Kconfig
--- a/linux-2.6-xen-sparse/drivers/firmware/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/firmware/Kconfig Tue Jan 31 19:55:22 2006
@@ -58,4 +58,31 @@
See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf>
+config DELL_RBU
+ tristate "BIOS update support for DELL systems via sysfs"
+ select FW_LOADER
+ help
+ Say m if you want to have the option of updating the BIOS for your
+ DELL system. Note you need a Dell OpenManage or Dell Update package
(DUP)
+ supporting application to comunicate with the BIOS regarding the new
+ image for the image update to take effect.
+ See <file:Documentation/dell_rbu.txt> for more details on the driver.
+
+config DCDBAS
+ tristate "Dell Systems Management Base Driver"
+ depends on X86 || X86_64
+ default m
+ help
+ The Dell Systems Management Base Driver provides a sysfs interface
+ for systems management software to perform System Management
+ Interrupts (SMIs) and Host Control Actions (system power cycle or
+ power off after OS shutdown) on certain Dell systems.
+
+ See <file:Documentation/dcdbas.txt> for more details on the driver
+ and the Dell systems on which Dell systems management software makes
+ use of this driver.
+
+ Say Y or M here to enable the driver for use by Dell systems
+ management software such as Dell OpenManage.
+
endmenu
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/pci/Kconfig
--- a/linux-2.6-xen-sparse/drivers/pci/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/pci/Kconfig Tue Jan 31 19:55:22 2006
@@ -31,23 +31,6 @@
When in doubt, say N.
-config PCI_NAMES
- bool "PCI device name database"
- depends on PCI
- ---help---
- By default, the kernel contains a database of all known PCI device
- names to make the information in /proc/pci, /proc/ioports and
- similar files comprehensible to the user.
-
- This database increases size of the kernel image by about 80KB. This
- memory is freed after the system boots up if CONFIG_HOTPLUG is not
set.
-
- Anyway, if you are building an installation floppy or kernel for an
- embedded system where kernel image size really matters, you can
disable
- this feature and you'll get device ID numbers instead of names.
-
- When in doubt, say Y.
-
config PCI_DEBUG
bool "PCI Debugging"
depends on PCI && DEBUG_KERNEL
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/serial/Kconfig
--- a/linux-2.6-xen-sparse/drivers/serial/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/serial/Kconfig Tue Jan 31 19:55:22 2006
@@ -80,20 +80,20 @@
config SERIAL_8250_ACPI
bool "8250/16550 device discovery via ACPI namespace"
default y if IA64
- depends on ACPI_BUS && SERIAL_8250
+ depends on ACPI && SERIAL_8250
---help---
If you wish to enable serial port discovery via the ACPI
namespace, say Y here. If unsure, say N.
config SERIAL_8250_NR_UARTS
- int "Maximum number of non-legacy 8250/16550 serial ports"
+ int "Maximum number of 8250/16550 serial ports"
depends on SERIAL_8250
default "4"
- ---help---
- Set this to the number of non-legacy serial ports you want
- the driver to support. This includes any ports discovered
- via ACPI or PCI enumeration and any ports that may be added
- at run-time via hot-plug.
+ help
+ Set this to the number of serial ports you want the driver
+ to support. This includes any ports discovered via ACPI or
+ PCI enumeration and any ports that may be added at run-time
+ via hot-plug, or any ISA multi-port serial cards.
config SERIAL_8250_EXTENDED
bool "Extended 8250/16550 serial driver options"
@@ -141,34 +141,77 @@
If unsure, say N.
-config SERIAL_8250_MULTIPORT
- bool "Support special multiport boards"
- depends on SERIAL_8250_EXTENDED
- help
- Some multiport serial ports have special ports which are used to
- signal when there are any serial ports on the board which need
- servicing. Say Y here to enable the serial driver to take advantage
- of those special I/O ports.
-
config SERIAL_8250_RSA
bool "Support RSA serial ports"
depends on SERIAL_8250_EXTENDED
help
::: To be written :::
-comment "Non-8250 serial port support"
+#
+# Multi-port serial cards
+#
+
+config SERIAL_8250_FOURPORT
+ tristate "Support Fourport cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have an AST FourPort serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_fourport.
+
+config SERIAL_8250_ACCENT
+ tristate "Support Accent cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have an Accent Async serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_accent.
+
+
+config SERIAL_8250_BOCA
+ tristate "Support Boca cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have a Boca serial board. Please read the Boca
+ mini-HOWTO, avaialble from <http://www.tldp.org/docs.html#howto>
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_boca.
+
+
+config SERIAL_8250_HUB6
+ tristate "Support Hub6 cards"
+ depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS
+ help
+ Say Y here if you have a HUB6 serial board.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_hub6.
+
+config SERIAL_8250_MCA
+ tristate "Support 8250-type ports on MCA buses"
+ depends on SERIAL_8250 != n && MCA
+ help
+ Say Y here if you have a MCA serial ports.
+
+ To compile this driver as a module, choose M here: the module
+ will be called 8250_mca.
config SERIAL_8250_ACORN
tristate "Acorn expansion card serial port support"
- depends on ARM && ARCH_ACORN && SERIAL_8250
+ depends on ARCH_ACORN && SERIAL_8250
help
If you have an Atomwide Serial card or Serial Port card for an Acorn
system, say Y to this option. The driver can handle 1, 2, or 3 port
cards. If unsure, say N.
+comment "Non-8250 serial port support"
+
config SERIAL_AMBA_PL010
tristate "ARM AMBA PL010 serial port support"
- depends on ARM_AMBA
+ depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE)
select SERIAL_CORE
help
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
@@ -263,16 +306,9 @@
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_BAST_SIO
- bool "Support for BAST SuperIO serial ports"
- depends on ARCH_BAST && SERIAL_8250=y
- help
- Support for registerin the SuperIO chip on BAST board with
- the 8250/16550 uart code.
-
config SERIAL_DZ
bool "DECstation DZ serial driver"
- depends on MACH_DECSTATION && MIPS32
+ depends on MACH_DECSTATION && 32BIT
select SERIAL_CORE
help
DZ11-family serial controllers for VAXstations, including the
@@ -753,7 +789,7 @@
config SERIAL_ICOM
tristate "IBM Multiport Serial Adapter"
- depends on PPC_ISERIES || PPC_PSERIES
+ depends on PCI && (PPC_ISERIES || PPC_PSERIES)
select SERIAL_CORE
help
This driver is for a family of multiport serial adapters
@@ -783,7 +819,7 @@
config SERIAL_M32R_PLDSIO
bool "M32R SIO I/F on a PLD"
- depends on SERIAL_M32R_SIO=y
+ depends on SERIAL_M32R_SIO=y && (PLAT_OPSPUT || PALT_USRV ||
PLAT_M32700UT)
default n
help
Say Y here if you want to use the M32R serial controller
@@ -794,7 +830,7 @@
config SERIAL_TXX9
bool "TMPTX39XX/49XX SIO support"
- depends HAS_TXX9_SERIAL
+ depends HAS_TXX9_SERIAL && BROKEN
select SERIAL_CORE
default y
@@ -843,4 +879,13 @@
To compile this driver as a module, choose M here: the
module will be called jsm.
+config SERIAL_SGI_IOC4
+ tristate "SGI IOC4 controller serial support"
+ depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
+ select SERIAL_CORE
+ help
+ If you have an SGI Altix with an IOC4 based Base IO card
+ and wish to use the serial ports on this card, say Y.
+ Otherwise, say N.
+
endmenu
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/xen/blkback/xenbus.c
--- a/linux-2.6-xen-sparse/drivers/xen/blkback/xenbus.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/xen/blkback/xenbus.c Tue Jan 31 19:55:22 2006
@@ -58,7 +58,8 @@
}
-static ssize_t show_physical_device(struct device *_dev, char *buf)
+static ssize_t show_physical_device(struct device *_dev,
+ struct device_attribute *attr, char *buf)
{
struct xenbus_device *dev = to_xenbus_device(_dev);
struct backend_info *be = dev->data;
@@ -68,7 +69,8 @@
show_physical_device, NULL);
-static ssize_t show_mode(struct device *_dev, char *buf)
+static ssize_t show_mode(struct device *_dev, struct device_attribute *attr,
+ char *buf)
{
struct xenbus_device *dev = to_xenbus_device(_dev);
struct backend_info *be = dev->data;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/xen/core/reboot.c
--- a/linux-2.6-xen-sparse/drivers/xen/core/reboot.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/xen/core/reboot.c Tue Jan 31 19:55:22 2006
@@ -22,6 +22,7 @@
* Power off function, if any
*/
void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
#endif
#define SHUTDOWN_INVALID -1
@@ -34,11 +35,16 @@
// the distinction when we return the reason code to them.
#define SHUTDOWN_HALT 4
-void machine_restart(char * __unused)
+void machine_emergency_restart(void)
{
/* We really want to get pending console data out before we die. */
xencons_force_flush();
HYPERVISOR_sched_op(SCHEDOP_shutdown, SHUTDOWN_reboot);
+}
+
+void machine_restart(char * __unused)
+{
+ machine_emergency_restart();
}
void machine_halt(void)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/xen/core/skbuff.c
--- a/linux-2.6-xen-sparse/drivers/xen/core/skbuff.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/xen/core/skbuff.c Tue Jan 31 19:55:22 2006
@@ -25,7 +25,8 @@
kmem_cache_t *cachep;
} skbuff_small[] = { { 512, NULL }, { 2048, NULL } };
-struct sk_buff *alloc_skb(unsigned int length, int gfp_mask)
+struct sk_buff *__alloc_skb(unsigned int length, gfp_t gfp_mask,
+ int fclone)
{
int order, i;
kmem_cache_t *cachep;
@@ -48,10 +49,10 @@
length -= sizeof(struct skb_shared_info);
- return alloc_skb_from_cache(cachep, length, gfp_mask);
+ return alloc_skb_from_cache(cachep, length, gfp_mask, fclone);
}
-struct sk_buff *__dev_alloc_skb(unsigned int length, int gfp_mask)
+struct sk_buff *__dev_alloc_skb(unsigned int length, gfp_t gfp_mask)
{
struct sk_buff *skb;
int order;
@@ -65,7 +66,7 @@
}
skb = alloc_skb_from_cache(
- skbuff_order_cachep[order], length, gfp_mask);
+ skbuff_order_cachep[order], length, gfp_mask, 0);
if (skb != NULL)
skb_reserve(skb, 16);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/drivers/xen/xenbus/xenbus_probe.c
--- a/linux-2.6-xen-sparse/drivers/xen/xenbus/xenbus_probe.c Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/xen/xenbus/xenbus_probe.c Tue Jan 31
19:55:22 2006
@@ -526,13 +526,15 @@
return p;
}
-static ssize_t xendev_show_nodename(struct device *dev, char *buf)
+static ssize_t xendev_show_nodename(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_xenbus_device(dev)->nodename);
}
DEVICE_ATTR(nodename, S_IRUSR | S_IRGRP | S_IROTH, xendev_show_nodename, NULL);
-static ssize_t xendev_show_devtype(struct device *dev, char *buf)
+static ssize_t xendev_show_devtype(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%s\n", to_xenbus_device(dev)->devicetype);
}
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/fs/Kconfig
--- a/linux-2.6-xen-sparse/fs/Kconfig Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/fs/Kconfig Tue Jan 31 19:55:22 2006
@@ -29,6 +29,7 @@
config EXT2_FS_POSIX_ACL
bool "Ext2 POSIX Access Control Lists"
depends on EXT2_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
@@ -49,6 +50,23 @@
If you are not using a security module that requires using
extended attributes for file security labels, say N.
+
+config EXT2_FS_XIP
+ bool "Ext2 execute in place support"
+ depends on EXT2_FS
+ help
+ Execute in place can be used on memory-backed block devices. If you
+ enable this option, you can select to mount block devices which are
+ capable of this feature without using the page cache.
+
+ If you do not use a block device that is capable of using this,
+ or if unsure, say N.
+
+config FS_XIP
+# execute in place
+ bool
+ depends on EXT2_FS_XIP
+ default y
config EXT3_FS
tristate "Ext3 journalling file system support"
@@ -97,6 +115,7 @@
config EXT3_FS_POSIX_ACL
bool "Ext3 POSIX Access Control Lists"
depends on EXT3_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
@@ -224,6 +243,7 @@
config REISERFS_FS_POSIX_ACL
bool "ReiserFS POSIX Access Control Lists"
depends on REISERFS_FS_XATTR
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
@@ -257,6 +277,7 @@
config JFS_POSIX_ACL
bool "JFS POSIX Access Control Lists"
depends on JFS_FS
+ select FS_POSIX_ACL
help
Posix Access Control Lists (ACLs) support permissions for users and
groups beyond the owner/group/world scheme.
@@ -301,8 +322,7 @@
# Never use this symbol for ifdefs.
#
bool
- depends on EXT2_FS_POSIX_ACL || EXT3_FS_POSIX_ACL || JFS_POSIX_ACL ||
REISERFS_FS_POSIX_ACL || NFSD_V4
- default y
+ default n
source "fs/xfs/Kconfig"
@@ -339,6 +359,22 @@
If you don't know whether you need it, then you don't need it:
answer N.
+config INOTIFY
+ bool "Inotify file change notification support"
+ default y
+ ---help---
+ Say Y here to enable inotify support and the associated system
+ calls. Inotify is a file change notification system and a
+ replacement for dnotify. Inotify fixes numerous shortcomings in
+ dnotify and introduces several new features. It allows monitoring
+ of both files and directories via a single open fd. Other features
+ include multiple file events, one-shot support, and unmount
+ notification.
+
+ For more information, see Documentation/filesystems/inotify.txt
+
+ If unsure, say Y.
+
config QUOTA
bool "Quota support"
help
@@ -346,10 +382,8 @@
usage (also called disk quotas). Currently, it works for the
ext2, ext3, and reiserfs file system. ext3 also supports journalled
quotas for which you don't need to run quotacheck(8) after an unclean
- shutdown. You need additional software in order to use quota support
- (you can download sources from
- <http://www.sf.net/projects/linuxquota/>). For further details, read
- the Quota mini-HOWTO, available from
+ shutdown.
+ For further details, read the Quota mini-HOWTO, available from
<http://www.tldp.org/docs.html#howto>, or the documentation provided
with the quota tools. Probably the quota support is only useful for
multi user systems. If unsure, say N.
@@ -367,8 +401,7 @@
depends on QUOTA
help
This quota format allows using quotas with 32-bit UIDs/GIDs. If you
- need this functionality say Y here. Note that you will need recent
- quota utilities (>= 3.01) for new quota format with this kernel.
+ need this functionality say Y here.
config QUOTACTL
bool
@@ -428,6 +461,22 @@
don't have a laptop which needs to dynamically reconfigure to the
local network, you probably do not need an automounter, and can say
N here.
+
+config FUSE_FS
+ tristate "Filesystem in Userspace support"
+ help
+ With FUSE it is possible to implement a fully functional filesystem
+ in a userspace program.
+
+ There's also companion library: libfuse. This library along with
+ utilities is available from the FUSE homepage:
+ <http://fuse.sourceforge.net/>
+
+ See <file:Documentation/filesystems/fuse.txt> for more information.
+ See <file:Documentation/Changes> for needed library/utility version.
+
+ If you want to develop a userspace FS, or if you want to use
+ a filesystem based on FUSE, answer Y or M.
menu "CD-ROM/DVD Filesystems"
@@ -717,6 +766,12 @@
bool "/proc/kcore support" if !ARM
depends on PROC_FS && MMU
+config PROC_VMCORE
+ bool "/proc/vmcore support (EXPERIMENTAL)"
+ depends on PROC_FS && EMBEDDED && EXPERIMENTAL && CRASH_DUMP
+ help
+ Exports the dump image of crashed kernel in ELF format.
+
config SYSFS
bool "sysfs file system support" if EMBEDDED
default y
@@ -741,78 +796,6 @@
Designers of embedded systems may wish to say N here to conserve space.
-config DEVFS_FS
- bool "/dev file system support (OBSOLETE)"
- depends on EXPERIMENTAL
- help
- This is support for devfs, a virtual file system (like /proc) which
- provides the file system interface to device drivers, normally found
- in /dev. Devfs does not depend on major and minor number
- allocations. Device drivers register entries in /dev which then
- appear automatically, which means that the system administrator does
- not have to create character and block special device files in the
- /dev directory using the mknod command (or MAKEDEV script) anymore.
-
- This is work in progress. If you want to use this, you *must* read
- the material in <file:Documentation/filesystems/devfs/>, especially
- the file README there.
-
- Note that devfs no longer manages /dev/pts! If you are using UNIX98
- ptys, you will also need to mount the /dev/pts filesystem (devpts).
-
- Note that devfs has been obsoleted by udev,
- <http://www.kernel.org/pub/linux/utils/kernel/hotplug/>.
- It has been stripped down to a bare minimum and is only provided for
- legacy installations that use its naming scheme which is
- unfortunately different from the names normal Linux installations
- use.
-
- If unsure, say N.
-
-config DEVFS_MOUNT
- bool "Automatically mount at boot"
- depends on DEVFS_FS
- help
- This option appears if you have CONFIG_DEVFS_FS enabled. Setting
- this to 'Y' will make the kernel automatically mount devfs onto /dev
- when the system is booted, before the init thread is started.
- You can override this with the "devfs=nomount" boot option.
-
- If unsure, say N.
-
-config DEVFS_DEBUG
- bool "Debug devfs"
- depends on DEVFS_FS
- help
- If you say Y here, then the /dev file system code will generate
- debugging messages. See the file
- <file:Documentation/filesystems/devfs/boot-options> for more
- details.
-
- If unsure, say N.
-
-config DEVPTS_FS_XATTR
- bool "/dev/pts Extended Attributes"
- depends on UNIX98_PTYS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config DEVPTS_FS_SECURITY
- bool "/dev/pts Security Labels"
- depends on DEVPTS_FS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the /dev/pts filesystem.
-
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
-
config TMPFS
bool "Virtual memory file system support (former shm fs)"
help
@@ -824,27 +807,6 @@
lost.
See <file:Documentation/filesystems/tmpfs.txt> for details.
-
-config TMPFS_XATTR
- bool "tmpfs Extended Attributes"
- depends on TMPFS
- help
- Extended attributes are name:value pairs associated with inodes by
- the kernel or by users (see the attr(5) manual page, or visit
- <http://acl.bestbits.at/> for details).
-
- If unsure, say N.
-
-config TMPFS_SECURITY
- bool "tmpfs Security Labels"
- depends on TMPFS_XATTR
- help
- Security labels support alternative access control models
- implemented by security modules like SELinux. This option
- enables an extended attribute handler for file security
- labels in the tmpfs filesystem.
- If you are not using a security module that requires using
- extended attributes for file security labels, say N.
config HUGETLBFS
bool "HugeTLB file system support"
@@ -867,6 +829,18 @@
To compile this as a module, choose M here: the module will be called
ramfs.
+
+config RELAYFS_FS
+ tristate "Relayfs file system support"
+ ---help---
+ Relayfs is a high-speed data relay filesystem designed to provide
+ an efficient mechanism for tools and facilities to relay large
+ amounts of data from kernel space to user space.
+
+ To compile this code as a module, choose M here: the module will be
+ called relayfs.
+
+ If unsure, say N.
endmenu
@@ -1064,26 +1038,18 @@
If reporting bugs, please try to have available a full dump of the
messages at debug level 1 while the misbehaviour was occurring.
-config JFFS2_FS_NAND
- bool "JFFS2 support for NAND flash"
+config JFFS2_FS_WRITEBUFFER
+ bool "JFFS2 write-buffering support"
depends on JFFS2_FS
- default n
- help
- This enables the support for NAND flash in JFFS2. NAND is a newer
- type of flash chip design than the traditional NOR flash, with
- higher density but a handful of characteristics which make it more
- interesting for the file system to use.
-
- Say 'N' unless you have NAND flash.
-
-config JFFS2_FS_NOR_ECC
- bool "JFFS2 support for ECC'd NOR flash (EXPERIMENTAL)"
- depends on JFFS2_FS && EXPERIMENTAL
- default n
- help
- This enables the experimental support for NOR flash with transparent
- ECC for JFFS2. This type of flash chip is not common, however it is
- available from ST Microelectronics.
+ default y
+ help
+ This enables the write-buffering support in JFFS2.
+
+ This functionality is required to support JFFS2 on the following
+ types of flash devices:
+ - NAND flash
+ - NOR flash with transparent ECC
+ - DataFlash
config JFFS2_COMPRESSION_OPTIONS
bool "Advanced compression options for JFFS2"
@@ -1319,6 +1285,7 @@
depends on INET
select LOCKD
select SUNRPC
+ select NFS_ACL_SUPPORT if NFS_V3_ACL
help
If you are connected to some other (usually local) Unix computer
(using SLIP, PLIP, PPP or Ethernet) and want to mount files residing
@@ -1361,6 +1328,16 @@
If unsure, say Y.
+config NFS_V3_ACL
+ bool "Provide client support for the NFSv3 ACL protocol extension"
+ depends on NFS_V3
+ help
+ Implement the NFSv3 ACL protocol extension for manipulating POSIX
+ Access Control Lists. The server should also be compiled with
+ the NFSv3 ACL protocol extension; see the CONFIG_NFSD_V3_ACL option.
+
+ If unsure, say N.
+
config NFS_V4
bool "Provide NFSv4 client support (EXPERIMENTAL)"
depends on NFS_FS && EXPERIMENTAL
@@ -1404,6 +1381,7 @@
select LOCKD
select SUNRPC
select EXPORTFS
+ select NFS_ACL_SUPPORT if NFSD_V3_ACL || NFSD_V2_ACL
help
If you want your Linux box to act as an NFS *server*, so that other
computers on your local network which support NFS can access certain
@@ -1427,17 +1405,34 @@
To compile the NFS server support as a module, choose M here: the
module will be called nfsd. If unsure, say N.
+config NFSD_V2_ACL
+ bool
+ depends on NFSD
+
config NFSD_V3
bool "Provide NFSv3 server support"
depends on NFSD
help
If you would like to include the NFSv3 server as well as the NFSv2
server, say Y here. If unsure, say Y.
+
+config NFSD_V3_ACL
+ bool "Provide server support for the NFSv3 ACL protocol extension"
+ depends on NFSD_V3
+ select NFSD_V2_ACL
+ help
+ Implement the NFSv3 ACL protocol extension for manipulating POSIX
+ Access Control Lists on exported file systems. NFS clients should
+ be compiled with the NFSv3 ACL protocol extension; see the
+ CONFIG_NFS_V3_ACL option. If unsure, say N.
config NFSD_V4
bool "Provide NFSv4 server support (EXPERIMENTAL)"
depends on NFSD_V3 && EXPERIMENTAL
select NFSD_TCP
+ select CRYPTO_MD5
+ select CRYPTO
+ select FS_POSIX_ACL
help
If you would like to include the NFSv4 server as well as the NFSv2
and NFSv3 servers, say Y here. This feature is experimental, and
@@ -1477,6 +1472,15 @@
config EXPORTFS
tristate
+
+config NFS_ACL_SUPPORT
+ tristate
+ select FS_POSIX_ACL
+
+config NFS_COMMON
+ bool
+ depends on NFSD || NFS_FS
+ default y
config SUNRPC
tristate
@@ -1716,6 +1720,17 @@
config RXRPC
tristate
+config 9P_FS
+ tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)"
+ depends on INET && EXPERIMENTAL
+ help
+ If you say Y here, you will get experimental support for
+ Plan 9 resource sharing via the 9P2000 protocol.
+
+ See <http://v9fs.sf.net> for more information.
+
+ If unsure, say N.
+
endmenu
menu "Partition Types"
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/bitops.h
--- a/linux-2.6-xen-sparse/include/asm-i386/bitops.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/bitops.h Tue Jan 31 19:55:22 2006
@@ -306,6 +306,20 @@
int find_next_zero_bit(const unsigned long *addr, int size, int offset);
/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+ __asm__("bsfl %1,%0"
+ :"=r" (word)
+ :"rm" (word));
+ return word;
+}
+
+/**
* find_first_bit - find the first set bit in a memory region
* @addr: The address to start the search at
* @size: The maximum size to search
@@ -315,22 +329,15 @@
*/
static inline int find_first_bit(const unsigned long *addr, unsigned size)
{
- int d0, d1;
- int res;
-
- /* This looks at memory. Mark it volatile to tell gcc not to move it
around */
- __asm__ __volatile__(
- "xorl %%eax,%%eax\n\t"
- "repe; scasl\n\t"
- "jz 1f\n\t"
- "leal -4(%%edi),%%edi\n\t"
- "bsfl (%%edi),%%eax\n"
- "1:\tsubl %%ebx,%%edi\n\t"
- "shll $3,%%edi\n\t"
- "addl %%edi,%%eax"
- :"=a" (res), "=&c" (d0), "=&D" (d1)
- :"1" ((size + 31) >> 5), "2" (addr), "b" (addr) : "memory");
- return res;
+ int x = 0;
+
+ while (x < size) {
+ unsigned long val = *addr++;
+ if (val)
+ return __ffs(val) + x;
+ x += (sizeof(*addr)<<3);
+ }
+ return x;
}
/**
@@ -352,20 +359,6 @@
__asm__("bsfl %1,%0"
:"=r" (word)
:"r" (~word));
- return word;
-}
-
-/**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
- __asm__("bsfl %1,%0"
- :"=r" (word)
- :"rm" (word));
return word;
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/desc.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/desc.h Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/desc.h Tue Jan 31
19:55:22 2006
@@ -25,8 +25,18 @@
extern struct Xgt_desc_struct idt_descr, cpu_gdt_descr[NR_CPUS];
-#define load_TR_desc() __asm__ __volatile__("ltr %%ax"::"a" (GDT_ENTRY_TSS*8))
-#define load_LDT_desc() __asm__ __volatile__("lldt %%ax"::"a"
(GDT_ENTRY_LDT*8))
+#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
+#define load_LDT_desc() __asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8))
+
+#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr))
+#define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr))
+#define load_tr(tr) __asm__ __volatile("ltr %0"::"mr" (tr))
+#define load_ldt(ldt) __asm__ __volatile("lldt %0"::"mr" (ldt))
+
+#define store_gdt(dtr) __asm__ ("sgdt %0":"=m" (*dtr))
+#define store_idt(dtr) __asm__ ("sidt %0":"=m" (*dtr))
+#define store_tr(tr) __asm__ ("str %0":"=mr" (tr))
+#define store_ldt(ldt) __asm__ ("sldt %0":"=mr" (ldt))
#define get_cpu_gdt_table(_cpu) ((struct desc_struct
*)cpu_gdt_descr[(_cpu)].address)
@@ -39,14 +49,14 @@
#define _set_tssldt_desc(n,addr,limit,type) \
__asm__ __volatile__ ("movw %w3,0(%2)\n\t" \
- "movw %%ax,2(%2)\n\t" \
- "rorl $16,%%eax\n\t" \
- "movb %%al,4(%2)\n\t" \
+ "movw %w1,2(%2)\n\t" \
+ "rorl $16,%1\n\t" \
+ "movb %b1,4(%2)\n\t" \
"movb %4,5(%2)\n\t" \
"movb $0,6(%2)\n\t" \
- "movb %%ah,7(%2)\n\t" \
- "rorl $16,%%eax" \
- : "=m"(*(n)) : "a" (addr), "r"(n), "ir"(limit), "i"(type))
+ "movb %h1,7(%2)\n\t" \
+ "rorl $16,%1" \
+ : "=m"(*(n)) : "q" (addr), "r"(n), "ir"(limit), "i"(type))
static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, void
*addr)
{
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/dma-mapping.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/dma-mapping.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/dma-mapping.h Tue Jan
31 19:55:22 2006
@@ -35,7 +35,7 @@
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, unsigned int __nocast flag);
+ dma_addr_t *dma_handle, gfp_t flag);
void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/fixmap.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/fixmap.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/fixmap.h Tue Jan
31 19:55:22 2006
@@ -77,7 +77,7 @@
FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */
FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
FIX_ACPI_BEGIN,
FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/highmem.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/highmem.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/highmem.h Tue Jan
31 19:55:22 2006
@@ -71,6 +71,7 @@
void *kmap_atomic(struct page *page, enum km_type type);
void *kmap_atomic_pte(struct page *page, enum km_type type);
void kunmap_atomic(void *kvaddr, enum km_type type);
+void *kmap_atomic_pfn(unsigned long pfn, enum km_type type);
struct page *kmap_atomic_to_page(void *ptr);
#define flush_cache_kmaps() do { } while (0)
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/hw_irq.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/hw_irq.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/hw_irq.h Tue Jan
31 19:55:22 2006
@@ -17,6 +17,8 @@
#include <asm/atomic.h>
#include <asm/irq.h>
#include <asm/sections.h>
+
+struct hw_interrupt_type;
/*
* Various low-level irq details needed by irq.c, process.c,
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/mmu_context.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/mmu_context.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/mmu_context.h Tue Jan
31 19:55:22 2006
@@ -23,9 +23,7 @@
#endif
}
-#define prepare_arch_switch(rq,next) __prepare_arch_switch()
-#define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock)
-#define task_running(rq, p) ((rq)->curr == (p))
+#define prepare_arch_switch(next) __prepare_arch_switch()
static inline void __prepare_arch_switch(void)
{
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/page.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/page.h Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/page.h Tue Jan 31
19:55:22 2006
@@ -221,29 +221,23 @@
*/
extern unsigned int __VMALLOC_RESERVE;
-/* Pure 2^n version of get_order */
-static __inline__ int get_order(unsigned long size)
-{
- int order;
-
- size = (size-1) >> (PAGE_SHIFT-1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-
extern int sysctl_legacy_va_layout;
+
+extern int page_is_ram(unsigned long pagenr);
#endif /* __ASSEMBLY__ */
#ifdef __ASSEMBLY__
#define __PAGE_OFFSET (0xC0000000)
+#define __PHYSICAL_START CONFIG_PHYSICAL_START
#else
#define __PAGE_OFFSET (0xC0000000UL)
-#endif
+#define __PHYSICAL_START ((unsigned long)CONFIG_PHYSICAL_START)
+#endif
+#define __KERNEL_START (__PAGE_OFFSET + __PHYSICAL_START)
+
+#undef LOAD_OFFSET
+#define LOAD_OFFSET 0
#define PAGE_OFFSET ((unsigned long)__PAGE_OFFSET)
@@ -252,11 +246,11 @@
#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET)
#define __va(x) ((void *)((unsigned
long)(x)+PAGE_OFFSET))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
#define pfn_to_page(pfn) (mem_map + (pfn))
#define page_to_pfn(page) ((unsigned long)((page) - mem_map))
#define pfn_valid(pfn) ((pfn) < max_mapnr)
-#endif /* !CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_FLATMEM */
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
@@ -273,4 +267,6 @@
#endif /* __KERNEL__ */
+#include <asm-generic/page.h>
+
#endif /* _I386_PAGE_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/param.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/param.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/param.h Tue Jan
31 19:55:22 2006
@@ -1,8 +1,10 @@
+#include <linux/config.h>
+
#ifndef _ASMi386_PARAM_H
#define _ASMi386_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
# define USER_HZ 100 /* .. some user interfaces are in
"ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pci.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pci.h Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pci.h Tue Jan 31
19:55:22 2006
@@ -27,7 +27,7 @@
struct pci_bus * pcibios_scan_root(int bus);
void pcibios_set_master(struct pci_dev *dev);
-void pcibios_penalize_isa_irq(int irq);
+void pcibios_penalize_isa_irq(int irq, int active);
struct irq_routing_table *pcibios_get_irq_routing_table(void);
int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
@@ -122,6 +122,16 @@
{
}
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable-3level.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable-3level.h
Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable-3level.h
Tue Jan 31 19:55:22 2006
@@ -87,7 +87,7 @@
# define set_pmd(pmdptr,pmdval) \
set_64bit((unsigned long long *)(pmdptr),pmd_val(pmdval))
# define set_pud(pudptr,pudval) \
- set_64bit((unsigned long long *)(pudptr),pud_val(pudval))
+ (*(pudptr) = (pudval))
#else
# define set_pmd(pmdptr,pmdval) \
xen_l2_entry_update((pmdptr), (pmdval))
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable.h Tue Jan
31 19:55:22 2006
@@ -87,9 +87,7 @@
#endif
/*
- * The 4MB page is guessing.. Detailed in the infamous "Chapter H"
- * of the Pentium details, but assuming intel did the straightforward
- * thing, this bit set in the page directory entry just means that
+ * _PAGE_PSE set in the page directory entry just means that
* the page directory entry points directly to a 4MB-aligned block of
* memory.
*/
@@ -120,8 +118,10 @@
#define _PAGE_UNUSED2 0x400
#define _PAGE_UNUSED3 0x800
-#define _PAGE_FILE 0x040 /* set:pagecache unset:swap */
-#define _PAGE_PROTNONE 0x080 /* If not present */
+/* If _PAGE_PRESENT is clear, we use these: */
+#define _PAGE_FILE 0x040 /* nonlinear file mapping, saved PTE;
unset:swap */
+#define _PAGE_PROTNONE 0x080 /* if the user mapped it with PROT_NONE;
+ pte_present gives true */
#ifdef CONFIG_X86_PAE
#define _PAGE_NX (1ULL<<_PAGE_BIT_NX)
#else
@@ -218,11 +218,13 @@
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
+#define __LARGE_PTE (_PAGE_PSE | _PAGE_PRESENT)
static inline int pte_user(pte_t pte) { return (pte).pte_low &
_PAGE_USER; }
static inline int pte_read(pte_t pte) { return (pte).pte_low &
_PAGE_USER; }
static inline int pte_dirty(pte_t pte) { return (pte).pte_low &
_PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return (pte).pte_low &
_PAGE_ACCESSED; }
static inline int pte_write(pte_t pte) { return (pte).pte_low &
_PAGE_RW; }
+static inline int pte_huge(pte_t pte) { return ((pte).pte_low &
__LARGE_PTE) == __LARGE_PTE; }
/*
* The following only works if pte_present() is not true.
@@ -239,6 +241,7 @@
static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte_low |= _PAGE_DIRTY;
return pte; }
static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte_low |=
_PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte_low |= _PAGE_RW;
return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) { (pte).pte_low |= __LARGE_PTE;
return pte; }
#ifdef CONFIG_X86_PAE
# include <asm/pgtable-3level.h>
@@ -260,6 +263,18 @@
return test_and_clear_bit(_PAGE_BIT_ACCESSED, &ptep->pte_low);
}
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned
long addr, pte_t *ptep, int full)
+{
+ pte_t pte;
+ if (full) {
+ pte = *ptep;
+ *ptep = __pte(0);
+ } else {
+ pte = ptep_get_and_clear(mm, addr, ptep);
+ }
+ return pte;
+}
+
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long
addr, pte_t *ptep)
{
if (pte_write(*ptep))
@@ -267,6 +282,21 @@
}
/*
+ * clone_pgd_range(pgd_t *dst, pgd_t *src, int count);
+ *
+ * dst - pointer to pgd range anwhere on a pgd page
+ * src - ""
+ * count - the number of pgds to copy.
+ *
+ * dst and src can be on the same page, but the range must not overlap,
+ * and must not cross a page boundary.
+ */
+static inline void clone_pgd_range(pgd_t *dst, pgd_t *src, int count)
+{
+ memcpy(dst, src, count * sizeof(pgd_t));
+}
+
+/*
* Macro to mark a page protection value as "uncacheable". On processors
which do not support
* it, this is a no-op.
*/
@@ -279,7 +309,6 @@
*/
#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
-#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE)
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
@@ -436,9 +465,9 @@
#endif /* !__ASSEMBLY__ */
-#ifndef CONFIG_DISCONTIGMEM
+#ifdef CONFIG_FLATMEM
#define kern_addr_valid(addr) (1)
-#endif /* !CONFIG_DISCONTIGMEM */
+#endif /* CONFIG_FLATMEM */
int direct_remap_pfn_range(struct vm_area_struct *vma,
unsigned long address,
@@ -458,9 +487,6 @@
unsigned long address,
unsigned long size);
-#define io_remap_page_range(vma,from,phys,size,prot) \
-direct_remap_pfn_range(vma,from,(phys)>>PAGE_SHIFT,size,prot,DOMID_IO)
-
#define io_remap_pfn_range(vma,from,pfn,size,prot) \
direct_remap_pfn_range(vma,from,pfn,size,prot,DOMID_IO)
@@ -471,6 +497,7 @@
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
#define __HAVE_ARCH_PTE_SAME
#include <asm-generic/pgtable.h>
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/processor.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/processor.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/processor.h Tue Jan
31 19:55:22 2006
@@ -20,6 +20,7 @@
#include <linux/config.h>
#include <linux/threads.h>
#include <asm/percpu.h>
+#include <xen/interface/physdev.h>
/* flag for disabling the tsc */
extern int tsc_disable;
@@ -29,7 +30,7 @@
};
#define desc_empty(desc) \
- (!((desc)->a + (desc)->b))
+ (!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) \
(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
@@ -204,11 +205,7 @@
return edx;
}
-#define load_cr3(pgdir) do { \
- xen_pt_switch(__pa(pgdir)); \
- per_cpu(cur_pgd, smp_processor_id()) = pgdir; \
-} while (/* CONSTCOND */0)
-
+#define load_cr3(pgdir) write_cr3(__pa(pgdir))
/*
* Intel CPU features in CR4
@@ -253,12 +250,11 @@
static inline void clear_in_cr4 (unsigned long mask)
{
+ unsigned cr4;
mmu_cr4_features &= ~mask;
- __asm__("movl %%cr4,%%eax\n\t"
- "andl %0,%%eax\n\t"
- "movl %%eax,%%cr4\n"
- : : "irg" (~mask)
- :"ax");
+ cr4 = read_cr4();
+ cr4 &= ~mask;
+ write_cr4(cr4);
}
/*
@@ -291,6 +287,11 @@
outb((reg), 0x22); \
outb((data), 0x23); \
} while (0)
+
+static inline void serialize_cpu(void)
+{
+ __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+}
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
@@ -452,7 +453,6 @@
unsigned long esp;
unsigned long fs;
unsigned long gs;
- unsigned int io_pl;
/* Hardware debugging registers */
unsigned long debugreg[8]; /* %%db0-7 debug registers */
/* fault info */
@@ -466,6 +466,7 @@
unsigned int saved_fs, saved_gs;
/* IO permissions */
unsigned long *io_bitmap_ptr;
+ unsigned long iopl;
/* max allowed port in the bitmap, in bytes: */
unsigned long io_bitmap_max;
};
@@ -486,7 +487,6 @@
.esp0 = sizeof(init_stack) + (long)&init_stack, \
.ss0 = __KERNEL_DS, \
.ss1 = __KERNEL_CS, \
- .ldt = GDT_ENTRY_LDT, \
.io_bitmap_base = INVALID_IO_BITMAP_OFFSET, \
.io_bitmap = { [ 0 ... IO_BITMAP_LONGS] = ~0 }, \
}
@@ -514,11 +514,25 @@
} while (0)
/*
- * This special macro can be used to load a debugging register
- */
-#define loaddebug(thread,register) \
- HYPERVISOR_set_debugreg((register), \
- ((thread)->debugreg[register]))
+ * These special macros can be used to get or set a debugging register
+ */
+#define get_debugreg(var, register) \
+ (var) = HYPERVISOR_get_debugreg((register))
+#define set_debugreg(value, register) \
+ HYPERVISOR_set_debugreg((register), (value))
+
+/*
+ * Set IOPL bits in EFLAGS from given mask
+ */
+static inline void set_iopl_mask(unsigned mask)
+{
+ physdev_op_t op;
+
+ /* Force the change at ring 0. */
+ op.cmd = PHYSDEVOP_SET_IOPL;
+ op.u.set_iopl.iopl = (mask == 0) ? 1 : (mask >> 12) & 3;
+ HYPERVISOR_physdev_op(&op);
+}
/* Forward declaration, a strange C thing */
struct task_struct;
@@ -671,7 +685,7 @@
However we don't do prefetches for pre XP Athlons currently
That should be fixed. */
#define ARCH_HAS_PREFETCH
-extern inline void prefetch(const void *x)
+static inline void prefetch(const void *x)
{
alternative_input(ASM_NOP4,
"prefetchnta (%1)",
@@ -685,7 +699,7 @@
/* 3dnow! prefetch to get an exclusive cache line. Useful for
spinlocks to avoid one state transition in the cache coherency protocol. */
-extern inline void prefetchw(const void *x)
+static inline void prefetchw(const void *x)
{
alternative_input(ASM_NOP4,
"prefetchw (%1)",
@@ -699,5 +713,15 @@
#define cache_line_size() (boot_cpu_data.x86_cache_alignment)
extern unsigned long boot_option_idle_override;
+extern void enable_sep_cpu(void);
+extern int sysenter_setup(void);
+
+#ifdef CONFIG_MTRR
+extern void mtrr_ap_init(void);
+extern void mtrr_bp_init(void);
+#else
+#define mtrr_ap_init() do {} while (0)
+#define mtrr_bp_init() do {} while (0)
+#endif
#endif /* __ASM_I386_PROCESSOR_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/ptrace.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/ptrace.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/ptrace.h Tue Jan
31 19:55:22 2006
@@ -55,15 +55,33 @@
#define PTRACE_SET_THREAD_AREA 26
#ifdef __KERNEL__
+
+#include <asm/vm86.h>
+
struct task_struct;
extern void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int
error_code);
-#define user_mode(regs) ((VM_MASK & (regs)->eflags) || (2 & (regs)->xcs))
+
+/*
+ * user_mode_vm(regs) determines whether a register set came from user mode.
+ * This is true if V8086 mode was enabled OR if the register set was from
+ * protected mode with RPL-3 CS value. This tricky test checks that with
+ * one comparison. Many places in the kernel can bypass this full check
+ * if they have already ruled out V8086 mode, so user_mode(regs) can be used.
+ */
+static inline int user_mode(struct pt_regs *regs)
+{
+ return (regs->xcs & 2) != 0;
+}
+static inline int user_mode_vm(struct pt_regs *regs)
+{
+ return ((regs->xcs & 2) | (regs->eflags & VM_MASK)) != 0;
+}
#define instruction_pointer(regs) ((regs)->eip)
#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
extern unsigned long profile_pc(struct pt_regs *regs);
#else
#define profile_pc(regs) instruction_pointer(regs)
#endif
-#endif
+#endif /* __KERNEL__ */
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/setup.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/setup.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/setup.h Tue Jan
31 19:55:22 2006
@@ -44,7 +44,7 @@
#define EFI_SYSTAB ((efi_system_table_t *) *((unsigned long *)(PARAM+0x1c4)))
#define EFI_MEMDESC_SIZE (*((unsigned long *) (PARAM+0x1c8)))
#define EFI_MEMDESC_VERSION (*((unsigned long *) (PARAM+0x1cc)))
-#define EFI_MEMMAP ((efi_memory_desc_t *) *((unsigned long *)(PARAM+0x1d0)))
+#define EFI_MEMMAP ((void *) *((unsigned long *)(PARAM+0x1d0)))
#define EFI_MEMMAP_SIZE (*((unsigned long *) (PARAM+0x1d4)))
#define MOUNT_ROOT_RDONLY (*(unsigned short *) (PARAM+0x1F2))
#define RAMDISK_FLAGS (*(unsigned short *) (PARAM+0x1F8))
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/smp.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/smp.h Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/smp.h Tue Jan 31
19:55:22 2006
@@ -37,21 +37,25 @@
extern cpumask_t cpu_sibling_map[];
extern cpumask_t cpu_core_map[];
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
-extern void smp_invalidate_rcv(void); /* Process an NMI */
extern void (*mtrr_hook) (void);
extern void zap_low_mappings (void);
+extern void lock_ipi_call_lock(void);
+extern void unlock_ipi_call_lock(void);
#define MAX_APICID 256
extern u8 x86_cpu_to_apicid[];
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void cpu_exit_clear(void);
+extern void cpu_uninit(void);
+#endif
/*
* This function is needed by all SMP systems. It must _always_ be valid
* from the initial startup. We map APIC_BASE very early in page_setup(),
* so this is correct in the x86 case.
*/
-#define __smp_processor_id() (current_thread_info()->cpu)
+#define raw_smp_processor_id() (current_thread_info()->cpu)
extern cpumask_t cpu_possible_map;
#define cpu_callin_map cpu_possible_map
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/spinlock.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/spinlock.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/spinlock.h Tue Jan
31 19:55:22 2006
@@ -8,47 +8,22 @@
#include <linux/compiler.h>
#include <asm/smp_alt.h>
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
-
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-typedef struct {
- volatile unsigned int slock;
-#ifdef CONFIG_DEBUG_SPINLOCK
- unsigned magic;
-#endif
-#ifdef CONFIG_PREEMPT
- unsigned int break_lock;
-#endif
-} spinlock_t;
-
-#define SPINLOCK_MAGIC 0xdead4ead
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define SPINLOCK_MAGIC_INIT , SPINLOCK_MAGIC
-#else
-#define SPINLOCK_MAGIC_INIT /* */
-#endif
-
-#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
-
-#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
-
-/*
+ *
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
*
* We make no fairness assumptions. They have a cost.
- */
-
-#define spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) <= 0)
-#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
-
-#define spin_lock_string \
- "1:\n" \
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#define __raw_spin_is_locked(x) \
+ (*(volatile signed char *)(&(x)->slock) <= 0)
+
+#define __raw_spin_lock_string \
+ "\n1:\n" \
LOCK \
"decb %0\n\t" \
"jns 3f\n" \
@@ -59,8 +34,8 @@
"jmp 1b\n" \
"3:\n\t"
-#define spin_lock_string_flags \
- "1:\n" \
+#define __raw_spin_lock_string_flags \
+ "\n1:\n" \
LOCK \
"decb %0\n\t" \
"jns 4f\n\t" \
@@ -76,52 +51,21 @@
"jmp 1b\n" \
"4:\n\t"
-/*
- * This works. Despite all the confusion.
- * (except on PPro SMP or if we are using OOSTORE)
- * (PPro errata 66, 92)
- */
-
-#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
-
-#define spin_unlock_string \
- "movb $1,%0" \
- :"=m" (lock->slock) : : "memory"
-
-
-static inline void _raw_spin_unlock(spinlock_t *lock)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(lock->magic != SPINLOCK_MAGIC);
- BUG_ON(!spin_is_locked(lock));
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#else
-
-#define spin_unlock_string \
- "xchgb %b0, %1" \
- :"=q" (oldval), "=m" (lock->slock) \
- :"0" (oldval) : "memory"
-
-static inline void _raw_spin_unlock(spinlock_t *lock)
-{
- char oldval = 1;
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(lock->magic != SPINLOCK_MAGIC);
- BUG_ON(!spin_is_locked(lock));
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#endif
-
-static inline int _raw_spin_trylock(spinlock_t *lock)
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ __raw_spin_lock_string
+ :"=m" (lock->slock) : : "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long
flags)
+{
+ __asm__ __volatile__(
+ __raw_spin_lock_string_flags
+ :"=m" (lock->slock) : "r" (flags) : "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
char oldval;
#ifdef CONFIG_SMP_ALTERNATIVES
@@ -148,38 +92,54 @@
:"0" (0) : "memory");
#else
__asm__ __volatile__(
- "xchgb %b0,%1\n"
+ "xchgb %b0,%1"
:"=q" (oldval), "=m" (lock->slock)
:"0" (0) : "memory");
#endif
return oldval > 0;
}
-static inline void _raw_spin_lock(spinlock_t *lock)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
- printk("eip: %p\n", __builtin_return_address(0));
- BUG();
- }
+/*
+ * __raw_spin_unlock based on writing $1 to the low byte.
+ * This method works. Despite all the confusion.
+ * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there)
+ * (PPro errata 66, 92)
+ */
+
+#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
+
+#define __raw_spin_unlock_string \
+ "movb $1,%0" \
+ :"=m" (lock->slock) : : "memory"
+
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ __raw_spin_unlock_string
+ );
+}
+
+#else
+
+#define __raw_spin_unlock_string \
+ "xchgb %b0, %1" \
+ :"=q" (oldval), "=m" (lock->slock) \
+ :"0" (oldval) : "memory"
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ char oldval = 1;
+
+ __asm__ __volatile__(
+ __raw_spin_unlock_string
+ );
+}
+
#endif
- __asm__ __volatile__(
- spin_lock_string
- :"=m" (lock->slock) : : "memory");
-}
-
-static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
- printk("eip: %p\n", __builtin_return_address(0));
- BUG();
- }
-#endif
- __asm__ __volatile__(
- spin_lock_string_flags
- :"=m" (lock->slock) : "r" (flags) : "memory");
-}
+
+#define __raw_spin_unlock_wait(lock) \
+ do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
/*
* Read-write spinlocks, allowing multiple readers
@@ -190,72 +150,41 @@
* can "mix" irq-safe locks - any writer needs to get a
* irq-safe write-lock, but readers can get non-irqsafe
* read-locks.
- */
-typedef struct {
- volatile unsigned int lock;
-#ifdef CONFIG_DEBUG_SPINLOCK
- unsigned magic;
-#endif
-#ifdef CONFIG_PREEMPT
- unsigned int break_lock;
-#endif
-} rwlock_t;
-
-#define RWLOCK_MAGIC 0xdeaf1eed
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define RWLOCK_MAGIC_INIT , RWLOCK_MAGIC
-#else
-#define RWLOCK_MAGIC_INIT /* */
-#endif
-
-#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
-
-#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores. See
+ * semaphore.h for details. -ben
+ *
+ * the helpers are in arch/i386/kernel/semaphore.c
+ */
/**
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define read_can_lock(x) ((int)(x)->lock > 0)
+#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
-
-/*
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- *
- * The inline assembly is non-obvious. Think about it.
- *
- * Changed to use the same technique as rw semaphores. See
- * semaphore.h for details. -ben
- */
-/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
-
-static inline void _raw_read_lock(rwlock_t *rw)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(rw->magic != RWLOCK_MAGIC);
-#endif
+#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
__build_read_lock(rw, "__read_lock_failed");
}
-static inline void _raw_write_lock(rwlock_t *rw)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(rw->magic != RWLOCK_MAGIC);
-#endif
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
__build_write_lock(rw, "__write_lock_failed");
}
-#define _raw_read_unlock(rw) asm volatile(LOCK "incl %0" :"=m" ((rw)->lock)
: : "memory")
-#define _raw_write_unlock(rw) asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR
",%0":"=m" ((rw)->lock) : : "memory")
-
-static inline int _raw_read_trylock(rwlock_t *lock)
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
@@ -265,7 +194,7 @@
return 0;
}
-static inline int _raw_write_trylock(rwlock_t *lock)
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
if (atomic_sub_and_test(RW_LOCK_BIAS, count))
@@ -274,4 +203,15 @@
return 0;
}
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK "incl %0" :"=m" (rw->lock) : : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR ", %0"
+ : "=m" (rw->lock) : : "memory");
+}
+
#endif /* __ASM_SPINLOCK_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/system.h
--- a/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/system.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/system.h Tue Jan
31 19:55:22 2006
@@ -12,13 +12,18 @@
#ifdef __KERNEL__
+#ifdef CONFIG_SMP
+#define __vcpu_id smp_processor_id()
+#else
+#define __vcpu_id 0
+#endif
+
struct task_struct; /* one of the stranger aspects of C forward
declarations.. */
extern struct task_struct * FASTCALL(__switch_to(struct task_struct *prev,
struct task_struct *next));
#define switch_to(prev,next,last) do { \
unsigned long esi,edi; \
- asm volatile("pushfl\n\t" \
- "pushl %%ebp\n\t" \
+ asm volatile("pushl %%ebp\n\t" \
"movl %%esp,%0\n\t" /* save ESP */ \
"movl %5,%%esp\n\t" /* restore ESP */ \
"movl $1f,%1\n\t" /* save EIP */ \
@@ -26,7 +31,6 @@
"jmp __switch_to\n" \
"1:\t" \
"popl %%ebp\n\t" \
- "popfl" \
:"=m" (prev->thread.esp),"=m" (prev->thread.eip), \
"=a" (last),"=S" (esi),"=D" (edi) \
:"m" (next->thread.esp),"m" (next->thread.eip), \
@@ -96,13 +100,13 @@
".align 4\n\t" \
".long 1b,3b\n" \
".previous" \
- : :"m" (value))
+ : :"rm" (value))
/*
* Save a segment register away
*/
#define savesegment(seg, value) \
- asm volatile("mov %%" #seg ",%0":"=m" (value))
+ asm volatile("mov %%" #seg ",%0":"=rm" (value))
/*
* Clear and set 'TS' bit respectively
@@ -110,13 +114,29 @@
#define clts() (HYPERVISOR_fpu_taskswitch(0))
#define read_cr0() ({ \
unsigned int __dummy; \
- __asm__( \
+ __asm__ __volatile__( \
"movl %%cr0,%0\n\t" \
:"=r" (__dummy)); \
__dummy; \
})
#define write_cr0(x) \
- __asm__("movl %0,%%cr0": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr2,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr2(x) \
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() per_cpu(cur_pgd, smp_processor_id())
+#define write_cr3(x) do { \
+ xen_pt_switch((x)); \
+ per_cpu(cur_pgd, smp_processor_id()) = (x); \
+} while (/* CONSTCOND */0)
#define read_cr4() ({ \
unsigned int __dummy; \
@@ -126,7 +146,8 @@
__dummy; \
})
#define write_cr4(x) \
- __asm__("movl %0,%%cr4": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
+
#define stts() (HYPERVISOR_fpu_taskswitch(1))
#endif /* __KERNEL__ */
@@ -501,7 +522,7 @@
do { \
vcpu_info_t *_vcpu; \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
_vcpu->evtchn_upcall_mask = 1; \
preempt_enable_no_resched(); \
barrier(); \
@@ -512,7 +533,7 @@
vcpu_info_t *_vcpu; \
barrier(); \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
_vcpu->evtchn_upcall_mask = 0; \
barrier(); /* unmask then check (avoid races) */ \
if ( unlikely(_vcpu->evtchn_upcall_pending) ) \
@@ -524,7 +545,7 @@
do { \
vcpu_info_t *_vcpu; \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
(x) = _vcpu->evtchn_upcall_mask; \
preempt_enable(); \
} while (0)
@@ -534,7 +555,7 @@
vcpu_info_t *_vcpu; \
barrier(); \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
if ((_vcpu->evtchn_upcall_mask = (x)) == 0) { \
barrier(); /* unmask then check (avoid races) */ \
if ( unlikely(_vcpu->evtchn_upcall_pending) ) \
@@ -545,12 +566,13 @@
} while (0)
#define safe_halt() ((void)0)
+#define halt() ((void)0)
#define __save_and_cli(x) \
do { \
vcpu_info_t *_vcpu; \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
(x) = _vcpu->evtchn_upcall_mask; \
_vcpu->evtchn_upcall_mask = 1; \
preempt_enable_no_resched(); \
@@ -568,7 +590,7 @@
({ int ___x; \
vcpu_info_t *_vcpu; \
preempt_disable(); \
- _vcpu = &HYPERVISOR_shared_info->vcpu_info[smp_processor_id()]; \
+ _vcpu = &HYPERVISOR_shared_info->vcpu_info[__vcpu_id]; \
___x = (_vcpu->evtchn_upcall_mask != 0); \
preempt_enable_no_resched(); \
___x; })
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/spinlock.h
--- a/linux-2.6-xen-sparse/include/asm-i386/spinlock.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/spinlock.h Tue Jan 31 19:55:22 2006
@@ -8,47 +8,22 @@
#include <linux/compiler.h>
#include <asm/smp_alt.h>
-asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
-
/*
* Your basic SMP spinlocks, allowing only a single CPU anywhere
- */
-
-typedef struct {
- volatile unsigned int slock;
-#ifdef CONFIG_DEBUG_SPINLOCK
- unsigned magic;
-#endif
-#ifdef CONFIG_PREEMPT
- unsigned int break_lock;
-#endif
-} spinlock_t;
-
-#define SPINLOCK_MAGIC 0xdead4ead
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define SPINLOCK_MAGIC_INIT , SPINLOCK_MAGIC
-#else
-#define SPINLOCK_MAGIC_INIT /* */
-#endif
-
-#define SPIN_LOCK_UNLOCKED (spinlock_t) { 1 SPINLOCK_MAGIC_INIT }
-
-#define spin_lock_init(x) do { *(x) = SPIN_LOCK_UNLOCKED; } while(0)
-
-/*
+ *
* Simple spin lock operations. There are two variants, one clears IRQ's
* on the local processor, one does not.
*
* We make no fairness assumptions. They have a cost.
- */
-
-#define spin_is_locked(x) (*(volatile signed char *)(&(x)->slock) <= 0)
-#define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
-
-#define spin_lock_string \
- "1:\n" \
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#define __raw_spin_is_locked(x) \
+ (*(volatile signed char *)(&(x)->slock) <= 0)
+
+#define __raw_spin_lock_string \
+ "\n1:\n" \
LOCK \
"decb %0\n\t" \
"jns 3f\n" \
@@ -59,8 +34,8 @@
"jmp 1b\n" \
"3:\n\t"
-#define spin_lock_string_flags \
- "1:\n" \
+#define __raw_spin_lock_string_flags \
+ "\n1:\n" \
LOCK \
"decb %0\n\t" \
"jns 4f\n\t" \
@@ -76,52 +51,21 @@
"jmp 1b\n" \
"4:\n\t"
-/*
- * This works. Despite all the confusion.
- * (except on PPro SMP or if we are using OOSTORE)
- * (PPro errata 66, 92)
- */
-
-#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
-
-#define spin_unlock_string \
- "movb $1,%0" \
- :"=m" (lock->slock) : : "memory"
-
-
-static inline void _raw_spin_unlock(spinlock_t *lock)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(lock->magic != SPINLOCK_MAGIC);
- BUG_ON(!spin_is_locked(lock));
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#else
-
-#define spin_unlock_string \
- "xchgb %b0, %1" \
- :"=q" (oldval), "=m" (lock->slock) \
- :"0" (oldval) : "memory"
-
-static inline void _raw_spin_unlock(spinlock_t *lock)
-{
- char oldval = 1;
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(lock->magic != SPINLOCK_MAGIC);
- BUG_ON(!spin_is_locked(lock));
-#endif
- __asm__ __volatile__(
- spin_unlock_string
- );
-}
-
-#endif
-
-static inline int _raw_spin_trylock(spinlock_t *lock)
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ __raw_spin_lock_string
+ :"=m" (lock->slock) : : "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long
flags)
+{
+ __asm__ __volatile__(
+ __raw_spin_lock_string_flags
+ :"=m" (lock->slock) : "r" (flags) : "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
{
char oldval;
#ifdef CONFIG_SMP_ALTERNATIVES
@@ -148,38 +92,54 @@
:"0" (0) : "memory");
#else
__asm__ __volatile__(
- "xchgb %b0,%1\n"
+ "xchgb %b0,%1"
:"=q" (oldval), "=m" (lock->slock)
:"0" (0) : "memory");
#endif
return oldval > 0;
}
-static inline void _raw_spin_lock(spinlock_t *lock)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
- printk("eip: %p\n", __builtin_return_address(0));
- BUG();
- }
+/*
+ * __raw_spin_unlock based on writing $1 to the low byte.
+ * This method works. Despite all the confusion.
+ * (except on PPro SMP or if we are using OOSTORE, so we use xchgb there)
+ * (PPro errata 66, 92)
+ */
+
+#if !defined(CONFIG_X86_OOSTORE) && !defined(CONFIG_X86_PPRO_FENCE)
+
+#define __raw_spin_unlock_string \
+ "movb $1,%0" \
+ :"=m" (lock->slock) : : "memory"
+
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ __asm__ __volatile__(
+ __raw_spin_unlock_string
+ );
+}
+
+#else
+
+#define __raw_spin_unlock_string \
+ "xchgb %b0, %1" \
+ :"=q" (oldval), "=m" (lock->slock) \
+ :"0" (oldval) : "memory"
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ char oldval = 1;
+
+ __asm__ __volatile__(
+ __raw_spin_unlock_string
+ );
+}
+
#endif
- __asm__ __volatile__(
- spin_lock_string
- :"=m" (lock->slock) : : "memory");
-}
-
-static inline void _raw_spin_lock_flags (spinlock_t *lock, unsigned long flags)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- if (unlikely(lock->magic != SPINLOCK_MAGIC)) {
- printk("eip: %p\n", __builtin_return_address(0));
- BUG();
- }
-#endif
- __asm__ __volatile__(
- spin_lock_string_flags
- :"=m" (lock->slock) : "r" (flags) : "memory");
-}
+
+#define __raw_spin_unlock_wait(lock) \
+ do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
/*
* Read-write spinlocks, allowing multiple readers
@@ -190,72 +150,41 @@
* can "mix" irq-safe locks - any writer needs to get a
* irq-safe write-lock, but readers can get non-irqsafe
* read-locks.
- */
-typedef struct {
- volatile unsigned int lock;
-#ifdef CONFIG_DEBUG_SPINLOCK
- unsigned magic;
-#endif
-#ifdef CONFIG_PREEMPT
- unsigned int break_lock;
-#endif
-} rwlock_t;
-
-#define RWLOCK_MAGIC 0xdeaf1eed
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-#define RWLOCK_MAGIC_INIT , RWLOCK_MAGIC
-#else
-#define RWLOCK_MAGIC_INIT /* */
-#endif
-
-#define RW_LOCK_UNLOCKED (rwlock_t) { RW_LOCK_BIAS RWLOCK_MAGIC_INIT }
-
-#define rwlock_init(x) do { *(x) = RW_LOCK_UNLOCKED; } while(0)
+ *
+ * On x86, we implement read-write locks as a 32-bit counter
+ * with the high bit (sign) being the "contended" bit.
+ *
+ * The inline assembly is non-obvious. Think about it.
+ *
+ * Changed to use the same technique as rw semaphores. See
+ * semaphore.h for details. -ben
+ *
+ * the helpers are in arch/i386/kernel/semaphore.c
+ */
/**
* read_can_lock - would read_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define read_can_lock(x) ((int)(x)->lock > 0)
+#define __raw_read_can_lock(x) ((int)(x)->lock > 0)
/**
* write_can_lock - would write_trylock() succeed?
* @lock: the rwlock in question.
*/
-#define write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
-
-/*
- * On x86, we implement read-write locks as a 32-bit counter
- * with the high bit (sign) being the "contended" bit.
- *
- * The inline assembly is non-obvious. Think about it.
- *
- * Changed to use the same technique as rw semaphores. See
- * semaphore.h for details. -ben
- */
-/* the spinlock helpers are in arch/i386/kernel/semaphore.c */
-
-static inline void _raw_read_lock(rwlock_t *rw)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(rw->magic != RWLOCK_MAGIC);
-#endif
+#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
__build_read_lock(rw, "__read_lock_failed");
}
-static inline void _raw_write_lock(rwlock_t *rw)
-{
-#ifdef CONFIG_DEBUG_SPINLOCK
- BUG_ON(rw->magic != RWLOCK_MAGIC);
-#endif
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
__build_write_lock(rw, "__write_lock_failed");
}
-#define _raw_read_unlock(rw) asm volatile(LOCK "incl %0" :"=m" ((rw)->lock)
: : "memory")
-#define _raw_write_unlock(rw) asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR
",%0":"=m" ((rw)->lock) : : "memory")
-
-static inline int _raw_read_trylock(rwlock_t *lock)
+static inline int __raw_read_trylock(raw_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
atomic_dec(count);
@@ -265,7 +194,7 @@
return 0;
}
-static inline int _raw_write_trylock(rwlock_t *lock)
+static inline int __raw_write_trylock(raw_rwlock_t *lock)
{
atomic_t *count = (atomic_t *)lock;
if (atomic_sub_and_test(RW_LOCK_BIAS, count))
@@ -274,4 +203,15 @@
return 0;
}
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK "incl %0" :"=m" (rw->lock) : : "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+ asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR ", %0"
+ : "=m" (rw->lock) : : "memory");
+}
+
#endif /* __ASM_SPINLOCK_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/system.h
--- a/linux-2.6-xen-sparse/include/asm-i386/system.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/system.h Tue Jan 31 19:55:22 2006
@@ -14,8 +14,7 @@
#define switch_to(prev,next,last) do { \
unsigned long esi,edi; \
- asm volatile("pushfl\n\t" \
- "pushl %%ebp\n\t" \
+ asm volatile("pushl %%ebp\n\t" \
"movl %%esp,%0\n\t" /* save ESP */ \
"movl %5,%%esp\n\t" /* restore ESP */ \
"movl $1f,%1\n\t" /* save EIP */ \
@@ -23,7 +22,6 @@
"jmp __switch_to\n" \
"1:\t" \
"popl %%ebp\n\t" \
- "popfl" \
:"=m" (prev->thread.esp),"=m" (prev->thread.eip), \
"=a" (last),"=S" (esi),"=D" (edi) \
:"m" (next->thread.esp),"m" (next->thread.eip), \
@@ -93,13 +91,13 @@
".align 4\n\t" \
".long 1b,3b\n" \
".previous" \
- : :"m" (value))
+ : :"rm" (value))
/*
* Save a segment register away
*/
#define savesegment(seg, value) \
- asm volatile("mov %%" #seg ",%0":"=m" (value))
+ asm volatile("mov %%" #seg ",%0":"=rm" (value))
/*
* Clear and set 'TS' bit respectively
@@ -107,13 +105,33 @@
#define clts() __asm__ __volatile__ ("clts")
#define read_cr0() ({ \
unsigned int __dummy; \
- __asm__( \
+ __asm__ __volatile__( \
"movl %%cr0,%0\n\t" \
:"=r" (__dummy)); \
__dummy; \
})
#define write_cr0(x) \
- __asm__("movl %0,%%cr0": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr0": :"r" (x));
+
+#define read_cr2() ({ \
+ unsigned int __dummy; \
+ __asm__ __volatile__( \
+ "movl %%cr2,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr2(x) \
+ __asm__ __volatile__("movl %0,%%cr2": :"r" (x));
+
+#define read_cr3() ({ \
+ unsigned int __dummy; \
+ __asm__ ( \
+ "movl %%cr3,%0\n\t" \
+ :"=r" (__dummy)); \
+ __dummy; \
+})
+#define write_cr3(x) \
+ __asm__ __volatile__("movl %0,%%cr3": :"r" (x));
#define read_cr4() ({ \
unsigned int __dummy; \
@@ -123,7 +141,7 @@
__dummy; \
})
#define write_cr4(x) \
- __asm__("movl %0,%%cr4": :"r" (x));
+ __asm__ __volatile__("movl %0,%%cr4": :"r" (x));
#define stts() write_cr0(8 | read_cr0())
#endif /* __KERNEL__ */
@@ -491,6 +509,8 @@
#define local_irq_enable() __asm__ __volatile__("sti": : :"memory")
/* used in the idle loop; sti takes one instruction cycle to complete */
#define safe_halt() __asm__ __volatile__("sti; hlt": : :"memory")
+/* used when interrupts are already enabled or to shutdown the processor */
+#define halt() __asm__ __volatile__("hlt": : :"memory")
#define irqs_disabled() \
({ \
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/asm-um/page.h
--- a/linux-2.6-xen-sparse/include/asm-um/page.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-um/page.h Tue Jan 31 19:55:22 2006
@@ -96,16 +96,15 @@
#define __va_space (8*1024*1024)
-extern unsigned long to_phys(void *virt);
-extern void *to_virt(unsigned long phys);
+#include "mem.h"
/* Cast to unsigned long before casting to void * to avoid a warning from
* mmap_kmem about cutting a long long down to a void *. Not sure that
* casting is the right thing, but 32-bit UML can't have 64-bit virtual
* addresses
*/
-#define __pa(virt) to_phys((void *) (unsigned long) virt)
-#define __va(phys) to_virt((unsigned long) phys)
+#define __pa(virt) to_phys((void *) (unsigned long) (virt))
+#define __va(phys) to_virt((unsigned long) (phys))
#define page_to_pfn(page) ((page) - mem_map)
#define pfn_to_page(pfn) (mem_map + (pfn))
@@ -116,24 +115,12 @@
#define pfn_valid(pfn) ((pfn) < max_mapnr)
#define virt_addr_valid(v) pfn_valid(phys_to_pfn(__pa(v)))
-/* Pure 2^n version of get_order */
-static __inline__ int get_order(unsigned long size)
-{
- int order;
-
- size = (size-1) >> (PAGE_SHIFT-1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
-
extern struct page *arch_validate(struct page *page, int mask, int order);
#define HAVE_ARCH_VALIDATE
extern int arch_free_page(struct page *page, int order);
#define HAVE_ARCH_FREE_PAGE
+#include <asm-generic/page.h>
+
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/desc.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/desc.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/desc.h Tue Jan
31 19:55:22 2006
@@ -8,6 +8,8 @@
#ifndef __ASSEMBLY__
#include <linux/string.h>
+#include <linux/smp.h>
+
#include <asm/segment.h>
#include <asm/mmu.h>
@@ -91,6 +93,7 @@
*/
extern struct desc_struct default_ldt[];
extern struct gate_struct idt_table[];
+extern struct desc_ptr cpu_gdt_descr[];
static inline void _set_gate(void *adr, unsigned type, unsigned long func,
unsigned dpl, unsigned ist)
{
@@ -215,7 +218,7 @@
/*
* load one particular LDT into the current CPU
*/
-extern inline void load_LDT_nolock (mm_context_t *pc, int cpu)
+static inline void load_LDT_nolock (mm_context_t *pc, int cpu)
{
void *segments = pc->ldt;
int count = pc->size;
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/fixmap.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/fixmap.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/fixmap.h Tue Jan
31 19:55:22 2006
@@ -47,7 +47,7 @@
FIX_IO_APIC_BASE_0,
FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS-1,
#endif
-#ifdef CONFIG_ACPI_BOOT
+#ifdef CONFIG_ACPI
FIX_ACPI_BEGIN,
FIX_ACPI_END = FIX_ACPI_BEGIN + FIX_ACPI_PAGES - 1,
#endif
@@ -93,7 +93,7 @@
* directly without translation, we catch the bug with a NULL-deference
* kernel oops. Illegal ranges of incoming indices are caught too.
*/
-extern inline unsigned long fix_to_virt(const unsigned int idx)
+static inline unsigned long fix_to_virt(const unsigned int idx)
{
/*
* this branch gets completely eliminated after inlining,
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/hw_irq.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/hw_irq.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/hw_irq.h Tue Jan
31 19:55:22 2006
@@ -26,6 +26,7 @@
struct hw_interrupt_type;
#endif
+#define NMI_VECTOR 0x02
/*
* IDT vectors usable for external interrupt sources start
* at 0x20:
@@ -51,13 +52,15 @@
#ifndef CONFIG_XEN
#define SPURIOUS_APIC_VECTOR 0xff
#define ERROR_APIC_VECTOR 0xfe
-#define INVALIDATE_TLB_VECTOR 0xfd
-#define RESCHEDULE_VECTOR 0xfc
-#define TASK_MIGRATION_VECTOR 0xfb
-#define CALL_FUNCTION_VECTOR 0xfa
-#define KDB_VECTOR 0xf9
+#define RESCHEDULE_VECTOR 0xfd
+#define CALL_FUNCTION_VECTOR 0xfc
+#define KDB_VECTOR 0xfb /* reserved for KDB */
+#define THERMAL_APIC_VECTOR 0xfa
+/* 0xf9 free */
+#define INVALIDATE_TLB_VECTOR_END 0xf8
+#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f8 used for TLB flush */
-#define THERMAL_APIC_VECTOR 0xf0
+#define NUM_INVALIDATE_TLB_VECTORS 8
#endif
/*
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/io.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/io.h Tue Jan 31
18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/io.h Tue Jan 31
19:55:22 2006
@@ -48,7 +48,7 @@
* Talk about misusing macros..
*/
#define __OUT1(s,x) \
-extern inline void out##s(unsigned x value, unsigned short port) {
+static inline void out##s(unsigned x value, unsigned short port) {
#define __OUT2(s,s1,s2) \
__asm__ __volatile__ ("out" #s " %" s1 "0,%" s2 "1"
@@ -58,7 +58,7 @@
__OUT1(s##_p,x) __OUT2(s,s1,"w") __FULL_SLOW_DOWN_IO : : "a" (value), "Nd"
(port));} \
#define __IN1(s) \
-extern inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
+static inline RETURN_TYPE in##s(unsigned short port) { RETURN_TYPE _v;
#define __IN2(s,s1,s2) \
__asm__ __volatile__ ("in" #s " %" s2 "1,%" s1 "0"
@@ -68,12 +68,12 @@
__IN1(s##_p) __IN2(s,s1,"w") __FULL_SLOW_DOWN_IO : "=a" (_v) : "Nd" (port)
,##i ); return _v; } \
#define __INS(s) \
-extern inline void ins##s(unsigned short port, void * addr, unsigned long
count) \
+static inline void ins##s(unsigned short port, void * addr, unsigned long
count) \
{ __asm__ __volatile__ ("rep ; ins" #s \
: "=D" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
#define __OUTS(s) \
-extern inline void outs##s(unsigned short port, const void * addr, unsigned
long count) \
+static inline void outs##s(unsigned short port, const void * addr, unsigned
long count) \
{ __asm__ __volatile__ ("rep ; outs" #s \
: "=S" (addr), "=c" (count) : "d" (port),"0" (addr),"1" (count)); }
@@ -110,12 +110,12 @@
* Change virtual addresses to physical addresses and vv.
* These are pretty trivial
*/
-extern inline unsigned long virt_to_phys(volatile void * address)
+static inline unsigned long virt_to_phys(volatile void * address)
{
return __pa(address);
}
-extern inline void * phys_to_virt(unsigned long address)
+static inline void * phys_to_virt(unsigned long address)
{
return __va(address);
}
@@ -128,8 +128,6 @@
/*
* Change "struct page" to physical address.
*/
-#ifdef CONFIG_DISCONTIGMEM
-#include <asm/mmzone.h>
#define page_to_pseudophys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
#define page_to_phys(page) (phys_to_machine(page_to_pseudophys(page)))
@@ -142,27 +140,12 @@
(((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) && \
((bvec_to_pseudophys((vec1)) + (vec1)->bv_len) == \
bvec_to_pseudophys((vec2))))
-#else
-// #define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT)
-#define page_to_pseudophys(page) ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-#define page_to_phys(page) (phys_to_machine(page_to_pseudophys(page)))
-
-#define bio_to_pseudophys(bio) (page_to_pseudophys(bio_page((bio))) + \
- (unsigned long) bio_offset((bio)))
-#define bvec_to_pseudophys(bv) (page_to_pseudophys((bv)->bv_page) + \
- (unsigned long) (bv)->bv_offset)
-
-#define BIOVEC_PHYS_MERGEABLE(vec1, vec2) \
- (((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) && \
- ((bvec_to_pseudophys((vec1)) + (vec1)->bv_len) == \
- bvec_to_pseudophys((vec2))))
-#endif
#include <asm-generic/iomap.h>
extern void __iomem *__ioremap(unsigned long offset, unsigned long size,
unsigned long flags);
-extern inline void __iomem * ioremap (unsigned long offset, unsigned long size)
+static inline void __iomem * ioremap (unsigned long offset, unsigned long size)
{
return __ioremap(offset, size, 0);
}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/irq.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/irq.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/irq.h Tue Jan
31 19:55:22 2006
@@ -29,8 +29,11 @@
# define irq_ctx_init(cpu) do { } while (0)
-struct irqaction;
-struct pt_regs;
-int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+#ifdef CONFIG_HOTPLUG_CPU
+#include <linux/cpumask.h>
+extern void fixup_irqs(cpumask_t map);
+#endif
+
+#define __ARCH_HAS_DO_SOFTIRQ 1
#endif /* _ASM_IRQ_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/mmu_context.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/mmu_context.h
Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/mmu_context.h
Tue Jan 31 19:55:22 2006
@@ -24,9 +24,7 @@
#endif
}
-#define prepare_arch_switch(rq,next) __prepare_arch_switch()
-#define finish_arch_switch(rq, next) spin_unlock_irq(&(rq)->lock)
-#define task_running(rq, p) ((rq)->curr == (p))
+#define prepare_arch_switch(next) __prepare_arch_switch()
static inline void __prepare_arch_switch(void)
{
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/page.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/page.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/page.h Tue Jan
31 19:55:22 2006
@@ -51,6 +51,8 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
+
+extern unsigned long end_pfn;
void clear_page(void *);
void copy_page(void *, void *);
@@ -179,15 +181,20 @@
#define __pgprot(x) ((pgprot_t) { (x) } )
-#define __START_KERNEL 0xffffffff80100000UL
+#define __PHYSICAL_START ((unsigned long)CONFIG_PHYSICAL_START)
+#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000UL
#define __PAGE_OFFSET 0xffff880000000000UL
#else
-#define __START_KERNEL 0xffffffff80100000
+#define __PHYSICAL_START CONFIG_PHYSICAL_START
+#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map 0xffffffff80000000
#define __PAGE_OFFSET 0xffff880000000000
#endif /* !__ASSEMBLY__ */
+
+#undef LOAD_OFFSET
+#define LOAD_OFFSET 0
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
@@ -204,20 +211,6 @@
#ifndef __ASSEMBLY__
#include <asm/bug.h>
-
-/* Pure 2^n version of get_order */
-extern __inline__ int get_order(unsigned long size)
-{
- int order;
-
- size = (size-1) >> (PAGE_SHIFT-1);
- order = -1;
- do {
- size >>= 1;
- order++;
- } while (size);
- return order;
-}
#endif /* __ASSEMBLY__ */
@@ -234,10 +227,12 @@
__pa(v); })
#define __va(x) ((void *)((unsigned
long)(x)+PAGE_OFFSET))
-#ifndef CONFIG_DISCONTIGMEM
+#define __boot_va(x) __va(x)
+#define __boot_pa(x) __pa(x)
+#ifdef CONFIG_FLATMEM
#define pfn_to_page(pfn) (mem_map + (pfn))
#define page_to_pfn(page) ((unsigned long)((page) - mem_map))
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define pfn_valid(pfn) ((pfn) < end_pfn)
#endif
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
@@ -257,4 +252,6 @@
#endif /* __KERNEL__ */
+#include <asm-generic/page.h>
+
#endif /* _X86_64_PAGE_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/param.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/param.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/param.h Tue Jan
31 19:55:22 2006
@@ -1,9 +1,11 @@
+#include <linux/config.h>
+
#ifndef _ASMx86_64_PARAM_H
#define _ASMx86_64_PARAM_H
#ifdef __KERNEL__
-# define HZ 100 /* Internal kernel timer frequency */
-# define USER_HZ 100 /* .. some user interfaces are in
"ticks" */
+# define HZ CONFIG_HZ /* Internal kernel timer frequency */
+# define USER_HZ 100 /* .. some user interfaces are in
"ticks */
# define CLOCKS_PER_SEC (USER_HZ) /* like times() */
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pci.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pci.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pci.h Tue Jan
31 19:55:22 2006
@@ -33,7 +33,7 @@
extern int (*pci_config_write)(int seg, int bus, int dev, int fn, int reg, int
len, u32 value);
void pcibios_set_master(struct pci_dev *dev);
-void pcibios_penalize_isa_irq(int irq);
+void pcibios_penalize_isa_irq(int irq, int active);
struct irq_routing_table *pcibios_get_irq_routing_table(void);
int pcibios_set_irq_routing(struct pci_dev *dev, int pin, int irq);
@@ -142,6 +142,16 @@
flush_write_buffers();
}
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+ enum pci_dma_burst_strategy *strat,
+ unsigned long *strategy_parameter)
+{
+ *strat = PCI_DMA_BURST_INFINITY;
+ *strategy_parameter = ~0UL;
+}
+#endif
+
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int
write_combine);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgalloc.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgalloc.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgalloc.h Tue Jan
31 19:55:22 2006
@@ -64,7 +64,7 @@
}
}
-extern __inline__ void pmd_free(pmd_t *pmd)
+static inline void pmd_free(pmd_t *pmd)
{
pte_t *ptep = virt_to_ptep(pmd);
@@ -178,7 +178,7 @@
/* Should really implement gc for free page table pages. This could be
done with a reference count in struct page. */
-extern __inline__ void pte_free_kernel(pte_t *pte)
+static inline void pte_free_kernel(pte_t *pte)
{
BUG_ON((unsigned long)pte & (PAGE_SIZE-1));
xen_pte_unpin(__pa(pte));
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgtable.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgtable.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgtable.h Tue Jan
31 19:55:22 2006
@@ -106,14 +106,14 @@
#define set_pud(pudptr, pudval) xen_l3_entry_update(pudptr, (pudval))
#define set_pgd(pgdptr, pgdval) xen_l4_entry_update(pgdptr, (pgdval))
-extern inline void pud_clear (pud_t * pud)
+static inline void pud_clear (pud_t * pud)
{
set_pud(pud, __pud(0));
}
#define __user_pgd(pgd) ((pgd) + PTRS_PER_PGD)
-extern inline void pgd_clear (pgd_t * pgd)
+static inline void pgd_clear (pgd_t * pgd)
{
set_pgd(pgd, __pgd(0));
set_pgd(__user_pgd(pgd), __pgd(0));
@@ -142,6 +142,18 @@
return pte;
}
#endif
+
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm, unsigned
long addr, pte_t *ptep, int full)
+{
+ pte_t pte;
+ if (full) {
+ pte = *ptep;
+ *ptep = __pte(0);
+ } else {
+ pte = ptep_get_and_clear(mm, addr, ptep);
+ }
+ return pte;
+}
#define pte_same(a, b) ((a).pte == (b).pte)
@@ -182,7 +194,7 @@
#define _PAGE_ACCESSED 0x020
#define _PAGE_DIRTY 0x040
#define _PAGE_PSE 0x080 /* 2MB page */
-#define _PAGE_FILE 0x040 /* set:pagecache, unset:swap */
+#define _PAGE_FILE 0x040 /* nonlinear file mapping, saved PTE;
unset:swap */
#define _PAGE_GLOBAL 0x100 /* Global TLB entry */
#define _PAGE_PROTNONE 0x080 /* If not present */
@@ -215,6 +227,8 @@
(_PAGE_PRESENT | _PAGE_USER | _PAGE_ACCESSED | _PAGE_PCD | _PAGE_USER )
#define __PAGE_KERNEL_LARGE \
(__PAGE_KERNEL | _PAGE_PSE | _PAGE_USER )
+#define __PAGE_KERNEL_LARGE_EXEC \
+ (__PAGE_KERNEL_EXEC | _PAGE_PSE | _PAGE_USER )
/*
@@ -303,8 +317,8 @@
({ \
unsigned long mfn = pte_mfn(_pte); \
unsigned long pfn = mfn_to_pfn(mfn); \
- if ((pfn >= max_mapnr) || (phys_to_machine_mapping[pfn] != mfn))\
- pfn = max_mapnr; /* special: force !pfn_valid() */ \
+ if ((pfn >= end_pfn) || (phys_to_machine_mapping[pfn] != mfn))\
+ pfn = end_pfn; /* special: force !pfn_valid() */ \
pfn; \
})
@@ -327,6 +341,7 @@
*/
#define __pte_val(x) ((x).pte)
+#define __LARGE_PTE (_PAGE_PSE|_PAGE_PRESENT)
static inline int pte_user(pte_t pte) { return __pte_val(pte) &
_PAGE_USER; }
extern inline int pte_read(pte_t pte) { return __pte_val(pte) &
_PAGE_USER; }
extern inline int pte_exec(pte_t pte) { return __pte_val(pte) &
_PAGE_USER; }
@@ -334,6 +349,7 @@
extern inline int pte_young(pte_t pte) { return __pte_val(pte) &
_PAGE_ACCESSED; }
extern inline int pte_write(pte_t pte) { return __pte_val(pte) &
_PAGE_RW; }
static inline int pte_file(pte_t pte) { return __pte_val(pte) &
_PAGE_FILE; }
+static inline int pte_huge(pte_t pte) { return (__pte_val(pte) &
__LARGE_PTE) == __LARGE_PTE; }
extern inline pte_t pte_rdprotect(pte_t pte) { __pte_val(pte) &=
~_PAGE_USER; return pte; }
extern inline pte_t pte_exprotect(pte_t pte) { __pte_val(pte) &=
~_PAGE_USER; return pte; }
@@ -345,6 +361,7 @@
extern inline pte_t pte_mkdirty(pte_t pte) { __pte_val(pte) |=
_PAGE_DIRTY; return pte; }
extern inline pte_t pte_mkyoung(pte_t pte) { __pte_val(pte) |=
_PAGE_ACCESSED; return pte; }
extern inline pte_t pte_mkwrite(pte_t pte) { __pte_val(pte) |= _PAGE_RW;
return pte; }
+extern inline pte_t pte_mkhuge(pte_t pte) { __pte_val(pte) |=
__LARGE_PTE; return pte; }
struct vm_area_struct;
@@ -378,7 +395,6 @@
*/
#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_PCD |
_PAGE_PWT))
-#define __LARGE_PTE (_PAGE_PSE|_PAGE_PRESENT)
static inline int pmd_large(pmd_t pte) {
return (pmd_val(pte) & __LARGE_PTE) == __LARGE_PTE;
}
@@ -455,7 +471,7 @@
}
/* Change flags of a PTE */
-extern inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
(pte).pte &= _PAGE_CHG_MASK;
(pte).pte |= pgprot_val(newprot);
@@ -464,7 +480,7 @@
}
#define pte_index(address) \
- ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+ (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, address) ((pte_t *) pmd_page_kernel(*(dir)) + \
pte_index(address))
@@ -537,9 +553,6 @@
unsigned long address,
unsigned long size);
-#define io_remap_page_range(vma, vaddr, paddr, size, prot) \
-
direct_remap_pfn_range(vma,vaddr,(paddr)>>PAGE_SHIFT,size,prot,DOMID_IO)
-
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
direct_remap_pfn_range(vma,vaddr,pfn,size,prot,DOMID_IO)
@@ -563,6 +576,7 @@
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
#define __HAVE_ARCH_PTEP_SET_WRPROTECT
#define __HAVE_ARCH_PTE_SAME
#include <asm-generic/pgtable.h>
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/processor.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/processor.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/processor.h Tue Jan
31 19:55:22 2006
@@ -32,7 +32,7 @@
#define ID_MASK 0x00200000
#define desc_empty(desc) \
- (!((desc)->a + (desc)->b))
+ (!((desc)->a | (desc)->b))
#define desc_equal(desc1, desc2) \
(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
@@ -183,16 +183,17 @@
/*
* User space process size. 47bits minus one guard page.
*/
-#define TASK_SIZE (0x800000000000UL - 4096)
+#define TASK_SIZE64 (0x800000000000UL - 4096)
/* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
#define IA32_PAGE_OFFSET ((current->personality & ADDR_LIMIT_3GB) ? 0xc0000000
: 0xFFFFe000)
-#define TASK_UNMAPPED_32 PAGE_ALIGN(IA32_PAGE_OFFSET/3)
-#define TASK_UNMAPPED_64 PAGE_ALIGN(TASK_SIZE/3)
-#define TASK_UNMAPPED_BASE \
- (test_thread_flag(TIF_IA32) ? TASK_UNMAPPED_32 : TASK_UNMAPPED_64)
+
+#define TASK_SIZE (test_thread_flag(TIF_IA32) ? IA32_PAGE_OFFSET
: TASK_SIZE64)
+#define TASK_SIZE_OF(child) ((test_tsk_thread_flag(child, TIF_IA32)) ?
IA32_PAGE_OFFSET : TASK_SIZE64)
+
+#define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE/3)
/*
* Size of io_bitmap.
@@ -256,7 +257,6 @@
unsigned long userrsp; /* Copy from PDA */
unsigned long fs;
unsigned long gs;
- unsigned int io_pl;
unsigned short es, ds, fsindex, gsindex;
/* Hardware debugging registers */
unsigned long debugreg0;
@@ -276,9 +276,16 @@
unsigned io_bitmap_max;
/* cached TLS descriptors. */
u64 tls_array[GDT_ENTRY_TLS_ENTRIES];
+ unsigned int iopl;
} __attribute__((aligned(16)));
-#define INIT_THREAD {}
+#define INIT_THREAD { \
+ .rsp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
+
+#define INIT_TSS { \
+ .rsp0 = (unsigned long)&init_stack + sizeof(init_stack) \
+}
#define INIT_MMAP \
{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL,
NULL }
@@ -303,6 +310,11 @@
(regs)->eflags = 0x200;
\
set_fs(USER_DS);
\
} while(0)
+
+#define get_debugreg(var, register) \
+ var = HYPERVISOR_get_debugreg(register)
+#define set_debugreg(value, register) \
+ HYPERVISOR_set_debugreg(register, value)
struct task_struct;
struct mm_struct;
@@ -391,13 +403,13 @@
#define ASM_NOP_MAX 8
/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */
-extern inline void rep_nop(void)
+static inline void rep_nop(void)
{
__asm__ __volatile__("rep;nop": : :"memory");
}
/* Stop speculative execution */
-extern inline void sync_core(void)
+static inline void sync_core(void)
{
int tmp;
asm volatile("cpuid" : "=a" (tmp) : "0" (1) :
"ebx","ecx","edx","memory");
@@ -414,7 +426,7 @@
#define ARCH_HAS_PREFETCHW 1
static inline void prefetchw(void *x)
{
- alternative_input(ASM_NOP5,
+ alternative_input("prefetcht0 (%1)",
"prefetchw (%1)",
X86_FEATURE_3DNOW,
"r" (x));
@@ -453,6 +465,11 @@
outb((data), 0x23); \
} while (0)
+static inline void serialize_cpu(void)
+{
+ __asm__ __volatile__ ("cpuid" : : : "ax", "bx", "cx", "dx");
+}
+
static inline void __monitor(const void *eax, unsigned long ecx,
unsigned long edx)
{
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/ptrace.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/ptrace.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/ptrace.h Tue Jan
31 19:55:22 2006
@@ -82,6 +82,7 @@
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
#define user_mode(regs) (!!((regs)->cs & 3))
+#define user_mode_vm(regs) user_mode(regs)
#define instruction_pointer(regs) ((regs)->rip)
#if defined(CONFIG_SMP) && defined(CONFIG_FRAME_POINTER)
extern unsigned long profile_pc(struct pt_regs *regs);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/smp.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/smp.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/smp.h Tue Jan
31 19:55:22 2006
@@ -42,13 +42,15 @@
extern void smp_alloc_memory(void);
extern volatile unsigned long smp_invalidate_needed;
extern int pic_mode;
+extern void lock_ipi_call_lock(void);
+extern void unlock_ipi_call_lock(void);
extern int smp_num_siblings;
-extern void smp_flush_tlb(void);
-extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
extern void smp_send_reschedule(int cpu);
-extern void smp_invalidate_rcv(void); /* Process an NMI */
extern void zap_low_mappings(void);
void smp_stop_cpu(void);
+extern int smp_call_function_single(int cpuid, void (*func) (void *info),
+ void *info, int retry, int wait);
+
extern cpumask_t cpu_sibling_map[NR_CPUS];
extern cpumask_t cpu_core_map[NR_CPUS];
extern int phys_proc_id[NR_CPUS];
@@ -67,10 +69,10 @@
return cpus_weight(cpu_possible_map);
}
-#define __smp_processor_id() read_pda(cpunumber)
+#define raw_smp_processor_id() read_pda(cpunumber)
#ifdef CONFIG_X86_LOCAL_APIC
-extern __inline int hard_smp_processor_id(void)
+static inline int hard_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
return GET_APIC_ID(*(unsigned int *)(APIC_BASE+APIC_ID));
@@ -78,6 +80,9 @@
#endif
extern int safe_smp_processor_id(void);
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+extern void prefill_possible_map(void);
#endif /* !ASSEMBLY */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/system.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/system.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/system.h Tue Jan
31 19:55:22 2006
@@ -120,12 +120,12 @@
/*
* Alternative inline assembly with input.
*
- * Pecularities:
+ * Peculiarities:
* No memory clobber here.
* Argument numbers start with 1.
* Best is to use constraints that are fixed size (like (%1) ... "r")
* If you use variable sized constraints like "m" or "g" in the
- * replacement maake sure to pad to the worst case length.
+ * replacement make sure to pad to the worst case length.
*/
#define alternative_input(oldinstr, newinstr, feature, input...) \
asm volatile ("661:\n\t" oldinstr "\n662:\n" \
@@ -192,7 +192,7 @@
#define __xg(x) ((volatile long *)(x))
-extern inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
+static inline void set_64bit(volatile unsigned long *ptr, unsigned long val)
{
*ptr = val;
}
@@ -257,19 +257,19 @@
case 2:
__asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
: "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
: "memory");
return prev;
case 4:
__asm__ __volatile__(LOCK_PREFIX "cmpxchgl %k1,%2"
: "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
: "memory");
return prev;
case 8:
__asm__ __volatile__(LOCK_PREFIX "cmpxchgq %1,%2"
: "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "r"(new), "m"(*__xg(ptr)), "0"(old)
: "memory");
return prev;
}
@@ -406,9 +406,6 @@
void disable_hlt(void);
void enable_hlt(void);
-#define HAVE_EAT_KEY
-void eat_key(void);
-
extern unsigned long arch_align_stack(unsigned long sp);
#endif
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/timer.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/timer.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/timer.h Tue Jan
31 19:55:22 2006
@@ -22,6 +22,9 @@
unsigned long (*get_offset)(void);
unsigned long long (*monotonic_clock)(void);
void (*delay)(unsigned long);
+ unsigned long (*read_timer)(void);
+ int (*suspend)(pm_message_t state);
+ int (*resume)(void);
};
struct init_timer_opts {
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/tlbflush.h
--- a/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/tlbflush.h Tue Jan
31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/tlbflush.h Tue Jan
31 19:55:22 2006
@@ -32,8 +32,9 @@
* - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
* - flush_tlb_pgtables(mm, start, end) flushes a range of page tables
*
- * ..but the x86_64 has somewhat limited tlb flushing capabilities,
- * and page-granular flushes are available only on i486 and up.
+ * x86-64 can only flush individual pages or full VMs. For a range flush
+ * we always do the full VM. Might be worth trying if for a small
+ * range a few INVLPGs in a row are a win.
*/
#ifndef CONFIG_SMP
@@ -84,6 +85,10 @@
#define TLBSTATE_OK 1
#define TLBSTATE_LAZY 2
+/* Roughly an IPI every 20MB with 4k pages for freeing page table
+ ranges. Cost is about 42k of memory for each CPU. */
+#define ARCH_FREE_PTE_NR 5350
+
#endif
#define flush_tlb_kernel_range(start, end) flush_tlb_all()
@@ -91,7 +96,9 @@
static inline void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end)
{
- /* x86_64 does not keep any page table caches in TLB */
+ /* x86_64 does not keep any page table caches in a software TLB.
+ The CPUs do in their hardware TLBs, but they are handled
+ by the normal TLB flushing algorithms. */
}
#endif /* _X8664_TLBFLUSH_H */
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/linux/gfp.h
--- a/linux-2.6-xen-sparse/include/linux/gfp.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/linux/gfp.h Tue Jan 31 19:55:22 2006
@@ -12,8 +12,8 @@
* GFP bitmasks..
*/
/* Zone modifiers in GFP_ZONEMASK (see linux/mmzone.h - low two bits) */
-#define __GFP_DMA 0x01
-#define __GFP_HIGHMEM 0x02
+#define __GFP_DMA 0x01u
+#define __GFP_HIGHMEM 0x02u
/*
* Action modifiers - doesn't change the zoning
@@ -39,6 +39,8 @@
#define __GFP_COMP 0x4000u /* Add compound page metadata */
#define __GFP_ZERO 0x8000u /* Return zeroed page on success */
#define __GFP_NOMEMALLOC 0x10000u /* Don't use emergency reserves */
+#define __GFP_NORECLAIM 0x20000u /* No realy zone reclaim during allocation */
+#define __GFP_HARDWALL 0x40000u /* Enforce hardwall cpuset memory allocs */
#define __GFP_BITS_SHIFT 20 /* Room for 20 __GFP_FOO bits */
#define __GFP_BITS_MASK ((1 << __GFP_BITS_SHIFT) - 1)
@@ -47,14 +49,15 @@
#define GFP_LEVEL_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS| \
__GFP_COLD|__GFP_NOWARN|__GFP_REPEAT| \
__GFP_NOFAIL|__GFP_NORETRY|__GFP_NO_GROW|__GFP_COMP| \
- __GFP_NOMEMALLOC)
+ __GFP_NOMEMALLOC|__GFP_NORECLAIM|__GFP_HARDWALL)
#define GFP_ATOMIC (__GFP_HIGH)
#define GFP_NOIO (__GFP_WAIT)
#define GFP_NOFS (__GFP_WAIT | __GFP_IO)
#define GFP_KERNEL (__GFP_WAIT | __GFP_IO | __GFP_FS)
-#define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS)
-#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HIGHMEM)
+#define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL)
+#define GFP_HIGHUSER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL | \
+ __GFP_HIGHMEM)
/* Flag - indicates that the buffer will be suitable for DMA. Ignored on some
platforms, used as appropriate on others */
@@ -86,9 +89,9 @@
#endif
extern struct page *
-FASTCALL(__alloc_pages(unsigned int, unsigned int, struct zonelist *));
+FASTCALL(__alloc_pages(gfp_t, unsigned int, struct zonelist *));
-static inline struct page *alloc_pages_node(int nid, unsigned int __nocast
gfp_mask,
+static inline struct page *alloc_pages_node(int nid, gfp_t gfp_mask,
unsigned int order)
{
if (unlikely(order >= MAX_ORDER))
@@ -99,17 +102,17 @@
}
#ifdef CONFIG_NUMA
-extern struct page *alloc_pages_current(unsigned int __nocast gfp_mask,
unsigned order);
+extern struct page *alloc_pages_current(gfp_t gfp_mask, unsigned order);
static inline struct page *
-alloc_pages(unsigned int __nocast gfp_mask, unsigned int order)
+alloc_pages(gfp_t gfp_mask, unsigned int order)
{
if (unlikely(order >= MAX_ORDER))
return NULL;
return alloc_pages_current(gfp_mask, order);
}
-extern struct page *alloc_page_vma(unsigned __nocast gfp_mask,
+extern struct page *alloc_page_vma(gfp_t gfp_mask,
struct vm_area_struct *vma, unsigned long addr);
#else
#define alloc_pages(gfp_mask, order) \
@@ -118,8 +121,8 @@
#endif
#define alloc_page(gfp_mask) alloc_pages(gfp_mask, 0)
-extern unsigned long FASTCALL(__get_free_pages(unsigned int __nocast gfp_mask,
unsigned int order));
-extern unsigned long FASTCALL(get_zeroed_page(unsigned int __nocast gfp_mask));
+extern unsigned long FASTCALL(__get_free_pages(gfp_t gfp_mask, unsigned int
order));
+extern unsigned long FASTCALL(get_zeroed_page(gfp_t gfp_mask));
#define __get_free_page(gfp_mask) \
__get_free_pages((gfp_mask),0)
@@ -136,5 +139,10 @@
#define free_page(addr) free_pages((addr),0)
void page_alloc_init(void);
+#ifdef CONFIG_NUMA
+void drain_remote_pages(void);
+#else
+static inline void drain_remote_pages(void) { };
+#endif
#endif /* __LINUX_GFP_H */
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/linux/highmem.h
--- a/linux-2.6-xen-sparse/include/linux/highmem.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/linux/highmem.h Tue Jan 31 19:55:22 2006
@@ -34,6 +34,7 @@
#define kmap_atomic(page, idx) page_address(page)
#define kunmap_atomic(addr, idx) do { } while (0)
+#define kmap_atomic_pfn(pfn, idx) page_address(pfn_to_page(pfn))
#define kmap_atomic_to_page(ptr) virt_to_page(ptr)
#endif /* CONFIG_HIGHMEM */
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/linux/irq.h
--- a/linux-2.6-xen-sparse/include/linux/irq.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/linux/irq.h Tue Jan 31 19:55:22 2006
@@ -32,7 +32,12 @@
#define IRQ_WAITING 32 /* IRQ not yet seen - for autodetection */
#define IRQ_LEVEL 64 /* IRQ level triggered */
#define IRQ_MASKED 128 /* IRQ masked - shouldn't be seen again */
-#define IRQ_PER_CPU 256 /* IRQ is per CPU */
+#if defined(ARCH_HAS_IRQ_PER_CPU)
+# define IRQ_PER_CPU 256 /* IRQ is per CPU */
+# define CHECK_IRQ_PER_CPU(var) ((var) & IRQ_PER_CPU)
+#else
+# define CHECK_IRQ_PER_CPU(var) 0
+#endif
/*
* Interrupt controller descriptor. This is all we need
@@ -47,6 +52,10 @@
void (*ack)(unsigned int irq);
void (*end)(unsigned int irq);
void (*set_affinity)(unsigned int irq, cpumask_t dest);
+ /* Currently used only by UML, might disappear one day.*/
+#ifdef CONFIG_IRQ_RELEASE_METHOD
+ void (*release)(unsigned int irq, void *dev_id);
+#endif
};
typedef struct hw_interrupt_type hw_irq_controller;
@@ -67,9 +76,19 @@
unsigned int irq_count; /* For detecting broken interrupts */
unsigned int irqs_unhandled;
spinlock_t lock;
+#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
+ unsigned int move_irq; /* Flag need to re-target intr dest*/
+#endif
} ____cacheline_aligned irq_desc_t;
extern irq_desc_t irq_desc [NR_IRQS];
+
+/* Return a pointer to the irq descriptor for IRQ. */
+static inline irq_desc_t *
+irq_descp (int irq)
+{
+ return irq_desc + irq;
+}
#include <asm/hw_irq.h> /* the arch dependent stuff */
@@ -80,14 +99,127 @@
#ifdef CONFIG_GENERIC_HARDIRQS
extern cpumask_t irq_affinity[NR_IRQS];
+
+#ifdef CONFIG_SMP
+static inline void set_native_irq_info(int irq, cpumask_t mask)
+{
+ irq_affinity[irq] = mask;
+}
+#else
+static inline void set_native_irq_info(int irq, cpumask_t mask)
+{
+}
+#endif
+
+#ifdef CONFIG_SMP
+
+#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
+extern cpumask_t pending_irq_cpumask[NR_IRQS];
+
+static inline void set_pending_irq(unsigned int irq, cpumask_t mask)
+{
+ irq_desc_t *desc = irq_desc + irq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->move_irq = 1;
+ pending_irq_cpumask[irq] = mask;
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+static inline void
+move_native_irq(int irq)
+{
+ cpumask_t tmp;
+ irq_desc_t *desc = irq_descp(irq);
+
+ if (likely (!desc->move_irq))
+ return;
+
+ desc->move_irq = 0;
+
+ if (likely(cpus_empty(pending_irq_cpumask[irq])))
+ return;
+
+ if (!desc->handler->set_affinity)
+ return;
+
+ /* note - we hold the desc->lock */
+ cpus_and(tmp, pending_irq_cpumask[irq], cpu_online_map);
+
+ /*
+ * If there was a valid mask to work with, please
+ * do the disable, re-program, enable sequence.
+ * This is *not* particularly important for level triggered
+ * but in a edge trigger case, we might be setting rte
+ * when an active trigger is comming in. This could
+ * cause some ioapics to mal-function.
+ * Being paranoid i guess!
+ */
+ if (unlikely(!cpus_empty(tmp))) {
+ desc->handler->disable(irq);
+ desc->handler->set_affinity(irq,tmp);
+ desc->handler->enable(irq);
+ }
+ cpus_clear(pending_irq_cpumask[irq]);
+}
+
+#ifdef CONFIG_PCI_MSI
+/*
+ * Wonder why these are dummies?
+ * For e.g the set_ioapic_affinity_vector() calls the set_ioapic_affinity_irq()
+ * counter part after translating the vector to irq info. We need to perform
+ * this operation on the real irq, when we dont use vector, i.e when
+ * pci_use_vector() is false.
+ */
+static inline void move_irq(int irq)
+{
+}
+
+static inline void set_irq_info(int irq, cpumask_t mask)
+{
+}
+
+#else // CONFIG_PCI_MSI
+
+static inline void move_irq(int irq)
+{
+ move_native_irq(irq);
+}
+
+static inline void set_irq_info(int irq, cpumask_t mask)
+{
+ set_native_irq_info(irq, mask);
+}
+#endif // CONFIG_PCI_MSI
+
+#else // CONFIG_GENERIC_PENDING_IRQ || CONFIG_IRQBALANCE
+
+#define move_irq(x)
+#define move_native_irq(x)
+#define set_pending_irq(x,y)
+static inline void set_irq_info(int irq, cpumask_t mask)
+{
+ set_native_irq_info(irq, mask);
+}
+
+#endif // CONFIG_GENERIC_PENDING_IRQ
+
+#else // CONFIG_SMP
+
+#define move_irq(x)
+#define move_native_irq(x)
+
+#endif // CONFIG_SMP
+
extern int no_irq_affinity;
extern int noirqdebug_setup(char *str);
extern fastcall int handle_IRQ_event(unsigned int irq, struct pt_regs *regs,
- struct irqaction *action);
+ struct irqaction *action);
extern fastcall unsigned int __do_IRQ(unsigned int irq, struct pt_regs *regs);
-extern void note_interrupt(unsigned int irq, irq_desc_t *desc, int action_ret);
-extern void report_bad_irq(unsigned int irq, irq_desc_t *desc, int action_ret);
+extern void note_interrupt(unsigned int irq, irq_desc_t *desc,
+ int action_ret, struct pt_regs *regs);
extern int can_request_irq(unsigned int irq, unsigned long irqflags);
extern void init_irq_proc(void);
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/linux/mm.h
--- a/linux-2.6-xen-sparse/include/linux/mm.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/linux/mm.h Tue Jan 31 19:55:22 2006
@@ -136,6 +136,7 @@
#define VM_EXEC 0x00000004
#define VM_SHARED 0x00000008
+/* mprotect() hardcodes VM_MAYREAD >> 4 == VM_READ, and so for r/w/x bits. */
#define VM_MAYREAD 0x00000010 /* limits for mprotect() etc */
#define VM_MAYWRITE 0x00000020
#define VM_MAYEXEC 0x00000040
@@ -353,7 +354,8 @@
* only one copy in memory, at most, normally.
*
* For the non-reserved pages, page_count(page) denotes a reference count.
- * page_count() == 0 means the page is free.
+ * page_count() == 0 means the page is free. page->lru is then used for
+ * freelist management in the buddy allocator.
* page_count() == 1 means the page is used for exactly one purpose
* (e.g. a private data page of one process).
*
@@ -379,10 +381,8 @@
* attaches, plus 1 if `private' contains something, plus one for
* the page cache itself.
*
- * All pages belonging to an inode are in these doubly linked lists:
- * mapping->clean_pages, mapping->dirty_pages and mapping->locked_pages;
- * using the page->list list_head. These fields are also used for
- * freelist managemet (when page_count()==0).
+ * Instead of keeping dirty/clean pages in per address-space lists, we instead
+ * now tag pages as dirty/under writeback in the radix tree.
*
* There is also a per-mapping radix tree mapping index to the page
* in memory if present. The tree is rooted at mapping->root.
@@ -398,19 +398,81 @@
/*
* The zone field is never updated after free_area_init_core()
* sets it, so none of the operations on it need to be atomic.
- * We'll have up to (MAX_NUMNODES * MAX_NR_ZONES) zones total,
- * so we use (MAX_NODES_SHIFT + MAX_ZONES_SHIFT) here to get enough bits.
- */
-#define NODEZONE_SHIFT (sizeof(page_flags_t)*8 - MAX_NODES_SHIFT -
MAX_ZONES_SHIFT)
-#define NODEZONE(node, zone) ((node << ZONES_SHIFT) | zone)
+ */
+
+
+/*
+ * page->flags layout:
+ *
+ * There are three possibilities for how page->flags get
+ * laid out. The first is for the normal case, without
+ * sparsemem. The second is for sparsemem when there is
+ * plenty of space for node and section. The last is when
+ * we have run out of space and have to fall back to an
+ * alternate (slower) way of determining the node.
+ *
+ * No sparsemem: | NODE | ZONE | ... | FLAGS |
+ * with space for node: | SECTION | NODE | ZONE | ... | FLAGS |
+ * no space for node: | SECTION | ZONE | ... | FLAGS |
+ */
+#ifdef CONFIG_SPARSEMEM
+#define SECTIONS_WIDTH SECTIONS_SHIFT
+#else
+#define SECTIONS_WIDTH 0
+#endif
+
+#define ZONES_WIDTH ZONES_SHIFT
+
+#if SECTIONS_WIDTH+ZONES_WIDTH+NODES_SHIFT <= FLAGS_RESERVED
+#define NODES_WIDTH NODES_SHIFT
+#else
+#define NODES_WIDTH 0
+#endif
+
+/* Page flags: | [SECTION] | [NODE] | ZONE | ... | FLAGS | */
+#define SECTIONS_PGOFF ((sizeof(page_flags_t)*8) - SECTIONS_WIDTH)
+#define NODES_PGOFF (SECTIONS_PGOFF - NODES_WIDTH)
+#define ZONES_PGOFF (NODES_PGOFF - ZONES_WIDTH)
+
+/*
+ * We are going to use the flags for the page to node mapping if its in
+ * there. This includes the case where there is no node, so it is implicit.
+ */
+#define FLAGS_HAS_NODE (NODES_WIDTH > 0 || NODES_SHIFT == 0)
+
+#ifndef PFN_SECTION_SHIFT
+#define PFN_SECTION_SHIFT 0
+#endif
+
+/*
+ * Define the bit shifts to access each section. For non-existant
+ * sections we define the shift as 0; that plus a 0 mask ensures
+ * the compiler will optimise away reference to them.
+ */
+#define SECTIONS_PGSHIFT (SECTIONS_PGOFF * (SECTIONS_WIDTH != 0))
+#define NODES_PGSHIFT (NODES_PGOFF * (NODES_WIDTH != 0))
+#define ZONES_PGSHIFT (ZONES_PGOFF * (ZONES_WIDTH != 0))
+
+/* NODE:ZONE or SECTION:ZONE is used to lookup the zone from a page. */
+#if FLAGS_HAS_NODE
+#define ZONETABLE_SHIFT (NODES_SHIFT + ZONES_SHIFT)
+#else
+#define ZONETABLE_SHIFT (SECTIONS_SHIFT + ZONES_SHIFT)
+#endif
+#define ZONETABLE_PGSHIFT ZONES_PGSHIFT
+
+#if SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > FLAGS_RESERVED
+#error SECTIONS_WIDTH+NODES_WIDTH+ZONES_WIDTH > FLAGS_RESERVED
+#endif
+
+#define ZONES_MASK ((1UL << ZONES_WIDTH) - 1)
+#define NODES_MASK ((1UL << NODES_WIDTH) - 1)
+#define SECTIONS_MASK ((1UL << SECTIONS_WIDTH) - 1)
+#define ZONETABLE_MASK ((1UL << ZONETABLE_SHIFT) - 1)
static inline unsigned long page_zonenum(struct page *page)
{
- return (page->flags >> NODEZONE_SHIFT) & (~(~0UL << ZONES_SHIFT));
-}
-static inline unsigned long page_to_nid(struct page *page)
-{
- return (page->flags >> (NODEZONE_SHIFT + ZONES_SHIFT));
+ return (page->flags >> ZONES_PGSHIFT) & ZONES_MASK;
}
struct zone;
@@ -418,13 +480,44 @@
static inline struct zone *page_zone(struct page *page)
{
- return zone_table[page->flags >> NODEZONE_SHIFT];
-}
-
-static inline void set_page_zone(struct page *page, unsigned long nodezone_num)
-{
- page->flags &= ~(~0UL << NODEZONE_SHIFT);
- page->flags |= nodezone_num << NODEZONE_SHIFT;
+ return zone_table[(page->flags >> ZONETABLE_PGSHIFT) &
+ ZONETABLE_MASK];
+}
+
+static inline unsigned long page_to_nid(struct page *page)
+{
+ if (FLAGS_HAS_NODE)
+ return (page->flags >> NODES_PGSHIFT) & NODES_MASK;
+ else
+ return page_zone(page)->zone_pgdat->node_id;
+}
+static inline unsigned long page_to_section(struct page *page)
+{
+ return (page->flags >> SECTIONS_PGSHIFT) & SECTIONS_MASK;
+}
+
+static inline void set_page_zone(struct page *page, unsigned long zone)
+{
+ page->flags &= ~(ZONES_MASK << ZONES_PGSHIFT);
+ page->flags |= (zone & ZONES_MASK) << ZONES_PGSHIFT;
+}
+static inline void set_page_node(struct page *page, unsigned long node)
+{
+ page->flags &= ~(NODES_MASK << NODES_PGSHIFT);
+ page->flags |= (node & NODES_MASK) << NODES_PGSHIFT;
+}
+static inline void set_page_section(struct page *page, unsigned long section)
+{
+ page->flags &= ~(SECTIONS_MASK << SECTIONS_PGSHIFT);
+ page->flags |= (section & SECTIONS_MASK) << SECTIONS_PGSHIFT;
+}
+
+static inline void set_page_links(struct page *page, unsigned long zone,
+ unsigned long node, unsigned long pfn)
+{
+ set_page_zone(page, zone);
+ set_page_node(page, node);
+ set_page_section(page, pfn_to_section_nr(pfn));
}
#ifndef CONFIG_DISCONTIGMEM
@@ -535,10 +628,16 @@
* Used to decide whether a process gets delivered SIGBUS or
* just gets major/minor fault counters bumped up.
*/
-#define VM_FAULT_OOM (-1)
-#define VM_FAULT_SIGBUS 0
-#define VM_FAULT_MINOR 1
-#define VM_FAULT_MAJOR 2
+#define VM_FAULT_OOM 0x00
+#define VM_FAULT_SIGBUS 0x01
+#define VM_FAULT_MINOR 0x02
+#define VM_FAULT_MAJOR 0x03
+
+/*
+ * Special case for get_user_pages.
+ * Must be in a distinct bit from the above VM_FAULT_ flags.
+ */
+#define VM_FAULT_WRITE 0x10
#define offset_in_page(p) ((unsigned long)(p) & ~PAGE_MASK)
@@ -614,7 +713,13 @@
extern pte_t *FASTCALL(pte_alloc_map(struct mm_struct *mm, pmd_t *pmd,
unsigned long address));
extern int install_page(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, struct page *page, pgprot_t prot);
extern int install_file_pte(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, unsigned long pgoff, pgprot_t prot);
-extern int handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma,
unsigned long address, int write_access);
+extern int __handle_mm_fault(struct mm_struct *mm,struct vm_area_struct *vma,
unsigned long address, int write_access);
+
+static inline int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct
*vma, unsigned long address, int write_access)
+{
+ return __handle_mm_fault(mm, vma, address, write_access) &
(~VM_FAULT_WRITE);
+}
+
extern int make_pages_present(unsigned long addr, unsigned long end);
extern int access_process_vm(struct task_struct *tsk, unsigned long addr, void
*buf, int len, int write);
void install_arg_page(struct vm_area_struct *, struct page *, unsigned long);
@@ -693,6 +798,12 @@
extern void show_mem(void);
extern void si_meminfo(struct sysinfo * val);
extern void si_meminfo_node(struct sysinfo *val, int nid);
+
+#ifdef CONFIG_NUMA
+extern void setup_per_cpu_pageset(void);
+#else
+static inline void setup_per_cpu_pageset(void) {}
+#endif
/* prio_tree.c */
void vma_prio_tree_add(struct vm_area_struct *, struct vm_area_struct *old);
@@ -824,8 +935,8 @@
void *data);
extern int generic_page_range(struct mm_struct *mm, unsigned long address,
unsigned long size, pte_fn_t fn, void *data);
-
-#endif
+#endif
+
#ifdef CONFIG_PROC_FS
void __vm_stat_account(struct mm_struct *, unsigned long, struct file *, long);
#else
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/linux/skbuff.h
--- a/linux-2.6-xen-sparse/include/linux/skbuff.h Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/linux/skbuff.h Tue Jan 31 19:55:22 2006
@@ -27,6 +27,7 @@
#include <linux/highmem.h>
#include <linux/poll.h>
#include <linux/net.h>
+#include <linux/textsearch.h>
#include <net/checksum.h>
#define HAVE_ALLOC_SKB /* For the drivers to know */
@@ -154,16 +155,27 @@
#define SKB_DATAREF_SHIFT 16
#define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
+struct skb_timeval {
+ u32 off_sec;
+ u32 off_usec;
+};
+
+
+enum {
+ SKB_FCLONE_UNAVAILABLE,
+ SKB_FCLONE_ORIG,
+ SKB_FCLONE_CLONE,
+};
+
/**
* struct sk_buff - socket buffer
* @next: Next buffer in list
* @prev: Previous buffer in list
* @list: List we are on
* @sk: Socket we are owned by
- * @stamp: Time we arrived
+ * @tstamp: Time we arrived
* @dev: Device we arrived on/are leaving by
* @input_dev: Device we arrived on
- * @real_dev: The real device we are using
* @h: Transport layer header
* @nh: Network layer header
* @mac: Link layer header
@@ -184,7 +196,6 @@
* @priority: Packet queueing priority
* @users: User count - see {datagram,tcp}.c
* @protocol: Packet protocol from driver
- * @security: Security level of packet
* @truesize: Buffer size
* @head: Head of buffer
* @data: Data head pointer
@@ -192,15 +203,11 @@
* @end: End pointer
* @destructor: Destruct function
* @nfmark: Can be used for communication between hooks
- * @nfcache: Cache info
* @nfct: Associated connection, if any
* @nfctinfo: Relationship of this skb to the connection
- * @nf_debug: Netfilter debugging
* @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
- * @private: Data which is private to the HIPPI implementation
* @tc_index: Traffic control index
* @tc_verd: traffic control verdict
- * @tc_classid: traffic control classid
*/
struct sk_buff {
@@ -208,12 +215,10 @@
struct sk_buff *next;
struct sk_buff *prev;
- struct sk_buff_head *list;
struct sock *sk;
- struct timeval stamp;
+ struct skb_timeval tstamp;
struct net_device *dev;
struct net_device *input_dev;
- struct net_device *real_dev;
union {
struct tcphdr *th;
@@ -251,44 +256,39 @@
data_len,
mac_len,
csum;
- unsigned char local_df,
+ __u32 priority;
+ __u8 local_df:1,
cloned:1,
+ ip_summed:2,
nohdr:1,
-#ifdef CONFIG_XEN
+ nfctinfo:3;
+ __u8 pkt_type:3,
+#ifndef CONFIG_XEN
+ fclone:2;
+#else
+ fclone:2,
proto_csum_valid:1,
- proto_csum_blank:1,
+ proto_csum_blank:1;
+ /* 1 bit spare */
#endif
- pkt_type,
- ip_summed;
- __u32 priority;
- unsigned short protocol,
- security;
+ __be16 protocol;
void (*destructor)(struct sk_buff *skb);
#ifdef CONFIG_NETFILTER
- unsigned long nfmark;
- __u32 nfcache;
- __u32 nfctinfo;
+ __u32 nfmark;
struct nf_conntrack *nfct;
-#ifdef CONFIG_NETFILTER_DEBUG
- unsigned int nf_debug;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ __u8 ipvs_property:1;
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
struct nf_bridge_info *nf_bridge;
#endif
#endif /* CONFIG_NETFILTER */
-#if defined(CONFIG_HIPPI)
- union {
- __u32 ifield;
- } private;
+#ifdef CONFIG_NET_SCHED
+ __u16 tc_index; /* traffic control index */
+#ifdef CONFIG_NET_CLS_ACT
+ __u16 tc_verd; /* traffic control verdict */
#endif
-#ifdef CONFIG_NET_SCHED
- __u32 tc_index; /* traffic control index */
-#ifdef CONFIG_NET_CLS_ACT
- __u32 tc_verd; /* traffic control verdict */
- __u32 tc_classid; /* traffic control classid */
-#endif
-
#endif
@@ -310,20 +310,39 @@
#include <asm/system.h>
extern void __kfree_skb(struct sk_buff *skb);
-extern struct sk_buff *alloc_skb(unsigned int size, int priority);
+extern struct sk_buff *__alloc_skb(unsigned int size,
+ gfp_t priority, int fclone);
+static inline struct sk_buff *alloc_skb(unsigned int size,
+ gfp_t priority)
+{
+ return __alloc_skb(size, priority, 0);
+}
+
+static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
+ gfp_t priority)
+{
+ return __alloc_skb(size, priority, 1);
+}
+
extern struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp,
- unsigned int size, int priority);
+ unsigned int size,
+ gfp_t priority,
+ int fclone);
extern void kfree_skbmem(struct sk_buff *skb);
-extern struct sk_buff *skb_clone(struct sk_buff *skb, int priority);
-extern struct sk_buff *skb_copy(const struct sk_buff *skb, int priority);
-extern struct sk_buff *pskb_copy(struct sk_buff *skb, int gfp_mask);
+extern struct sk_buff *skb_clone(struct sk_buff *skb,
+ gfp_t priority);
+extern struct sk_buff *skb_copy(const struct sk_buff *skb,
+ gfp_t priority);
+extern struct sk_buff *pskb_copy(struct sk_buff *skb,
+ gfp_t gfp_mask);
extern int pskb_expand_head(struct sk_buff *skb,
- int nhead, int ntail, int gfp_mask);
+ int nhead, int ntail,
+ gfp_t gfp_mask);
extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
unsigned int headroom);
extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
int newheadroom, int newtailroom,
- int priority);
+ gfp_t priority);
extern struct sk_buff * skb_pad(struct sk_buff *skb, int pad);
#define dev_kfree_skb(a) kfree_skb(a)
extern void skb_over_panic(struct sk_buff *skb, int len,
@@ -331,6 +350,28 @@
extern void skb_under_panic(struct sk_buff *skb, int len,
void *here);
+struct skb_seq_state
+{
+ __u32 lower_offset;
+ __u32 upper_offset;
+ __u32 frag_idx;
+ __u32 stepped_offset;
+ struct sk_buff *root_skb;
+ struct sk_buff *cur_skb;
+ __u8 *frag_data;
+};
+
+extern void skb_prepare_seq_read(struct sk_buff *skb,
+ unsigned int from, unsigned int to,
+ struct skb_seq_state *st);
+extern unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
+ struct skb_seq_state *st);
+extern void skb_abort_seq_read(struct skb_seq_state *st);
+
+extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from,
+ unsigned int to, struct ts_config *config,
+ struct ts_state *state);
+
/* Internal */
#define skb_shinfo(SKB) ((struct skb_shared_info *)((SKB)->end))
@@ -452,7 +493,8 @@
*
* NULL is returned on a memory allocation failure.
*/
-static inline struct sk_buff *skb_share_check(struct sk_buff *skb, int pri)
+static inline struct sk_buff *skb_share_check(struct sk_buff *skb,
+ gfp_t pri)
{
might_sleep_if(pri & __GFP_WAIT);
if (skb_shared(skb)) {
@@ -483,7 +525,8 @@
*
* %NULL is returned on a memory allocation failure.
*/
-static inline struct sk_buff *skb_unshare(struct sk_buff *skb, int pri)
+static inline struct sk_buff *skb_unshare(struct sk_buff *skb,
+ gfp_t pri)
{
might_sleep_if(pri & __GFP_WAIT);
if (skb_cloned(skb)) {
@@ -577,7 +620,6 @@
{
struct sk_buff *prev, *next;
- newsk->list = list;
list->qlen++;
prev = (struct sk_buff *)list;
next = prev->next;
@@ -602,7 +644,6 @@
{
struct sk_buff *prev, *next;
- newsk->list = list;
list->qlen++;
next = (struct sk_buff *)list;
prev = next->prev;
@@ -635,7 +676,6 @@
next->prev = prev;
prev->next = next;
result->next = result->prev = NULL;
- result->list = NULL;
}
return result;
}
@@ -644,7 +684,7 @@
/*
* Insert a packet on a list.
*/
-extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk);
+extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk,
struct sk_buff_head *list);
static inline void __skb_insert(struct sk_buff *newsk,
struct sk_buff *prev, struct sk_buff *next,
struct sk_buff_head *list)
@@ -652,24 +692,23 @@
newsk->next = next;
newsk->prev = prev;
next->prev = prev->next = newsk;
- newsk->list = list;
list->qlen++;
}
/*
* Place a packet after a given packet in a list.
*/
-extern void skb_append(struct sk_buff *old, struct sk_buff *newsk);
-static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk)
-{
- __skb_insert(newsk, old, old->next, old->list);
+extern void skb_append(struct sk_buff *old, struct sk_buff *newsk,
struct sk_buff_head *list);
+static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk,
struct sk_buff_head *list)
+{
+ __skb_insert(newsk, old, old->next, list);
}
/*
* remove sk_buff from list. _Must_ be called atomically, and with
* the list known..
*/
-extern void skb_unlink(struct sk_buff *skb);
+extern void skb_unlink(struct sk_buff *skb, struct sk_buff_head *list);
static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
{
struct sk_buff *next, *prev;
@@ -678,7 +717,6 @@
next = skb->next;
prev = skb->prev;
skb->next = skb->prev = NULL;
- skb->list = NULL;
next->prev = prev;
prev->next = next;
}
@@ -989,7 +1027,7 @@
* %NULL is returned in there is no free memory.
*/
static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct sk_buff *skb = alloc_skb(length + 16, gfp_mask);
if (likely(skb))
@@ -997,7 +1035,7 @@
return skb;
}
#else
-extern struct sk_buff *__dev_alloc_skb(unsigned int length, int gfp_mask);
+extern struct sk_buff *__dev_alloc_skb(unsigned int length, gfp_t gfp_mask);
#endif
/**
@@ -1102,8 +1140,8 @@
* If there is no free memory -ENOMEM is returned, otherwise zero
* is returned and the old skb data released.
*/
-extern int __skb_linearize(struct sk_buff *skb, int gfp);
-static inline int skb_linearize(struct sk_buff *skb, int gfp)
+extern int __skb_linearize(struct sk_buff *skb, gfp_t gfp);
+static inline int skb_linearize(struct sk_buff *skb, gfp_t gfp)
{
return __skb_linearize(skb, gfp);
}
@@ -1137,7 +1175,7 @@
static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
{
- if (len >= skb->len)
+ if (likely(len >= skb->len))
return 0;
if (skb->ip_summed == CHECKSUM_HW)
skb->ip_summed = CHECKSUM_NONE;
@@ -1193,12 +1231,14 @@
extern void skb_split(struct sk_buff *skb,
struct sk_buff *skb1, const u32 len);
+extern void skb_release_data(struct sk_buff *skb);
+
static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
int len, void *buffer)
{
int hlen = skb_headlen(skb);
- if (offset + len <= hlen)
+ if (hlen - offset >= len)
return skb->data + offset;
if (skb_copy_bits(skb, offset, buffer, len) < 0)
@@ -1210,6 +1250,38 @@
extern void skb_init(void);
extern void skb_add_mtu(int mtu);
+/**
+ * skb_get_timestamp - get timestamp from a skb
+ * @skb: skb to get stamp from
+ * @stamp: pointer to struct timeval to store stamp in
+ *
+ * Timestamps are stored in the skb as offsets to a base timestamp.
+ * This function converts the offset back to a struct timeval and stores
+ * it in stamp.
+ */
+static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval
*stamp)
+{
+ stamp->tv_sec = skb->tstamp.off_sec;
+ stamp->tv_usec = skb->tstamp.off_usec;
+}
+
+/**
+ * skb_set_timestamp - set timestamp of a skb
+ * @skb: skb to set stamp of
+ * @stamp: pointer to struct timeval to get stamp from
+ *
+ * Timestamps are stored in the skb as offsets to a base timestamp.
+ * This function converts a struct timeval to an offset and stores
+ * it in the skb.
+ */
+static inline void skb_set_timestamp(struct sk_buff *skb, const struct timeval
*stamp)
+{
+ skb->tstamp.off_sec = stamp->tv_sec;
+ skb->tstamp.off_usec = stamp->tv_usec;
+}
+
+extern void __net_timestamp(struct sk_buff *skb);
+
#ifdef CONFIG_NETFILTER
static inline void nf_conntrack_put(struct nf_conntrack *nfct)
{
@@ -1225,15 +1297,6 @@
{
nf_conntrack_put(skb->nfct);
skb->nfct = NULL;
-#ifdef CONFIG_NETFILTER_DEBUG
- skb->nf_debug = 0;
-#endif
-}
-static inline void nf_reset_debug(struct sk_buff *skb)
-{
-#ifdef CONFIG_NETFILTER_DEBUG
- skb->nf_debug = 0;
-#endif
}
#ifdef CONFIG_BRIDGE_NETFILTER
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/kernel/irq/manage.c
--- a/linux-2.6-xen-sparse/kernel/irq/manage.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/kernel/irq/manage.c Tue Jan 31 19:55:22 2006
@@ -6,6 +6,7 @@
* This file contains driver APIs to the irq subsystem.
*/
+#include <linux/config.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/random.h>
@@ -16,6 +17,10 @@
#ifdef CONFIG_SMP
cpumask_t irq_affinity[NR_IRQS] = { [0 ... NR_IRQS-1] = CPU_MASK_ALL };
+
+#if defined (CONFIG_GENERIC_PENDING_IRQ) || defined (CONFIG_IRQBALANCE)
+cpumask_t __cacheline_aligned pending_irq_cpumask[NR_IRQS];
+#endif
/**
* synchronize_irq - wait for pending IRQ handlers (on other CPUs)
@@ -146,9 +151,14 @@
return !action;
}
-/*
- * Internal function to register an irqaction - typically used to
- * allocate special interrupts that are part of the architecture.
+/**
+ * setup_irq - register an irqaction structure
+ * @irq: Interrupt to register
+ * @irqaction: The irqaction structure to be registered
+ *
+ * Normally called by request_irq, this function can be used
+ * directly to allocate special interrupts that are part of the
+ * architecture.
*/
int setup_irq(unsigned int irq, struct irqaction * new)
{
@@ -217,7 +227,6 @@
return 0;
}
-#ifdef CONFIG_XEN
/*
* teardown_irq - unregister an irqaction
* @irq: Interrupt line being freed
@@ -231,6 +240,9 @@
*
* This function must not be called from interrupt context.
*/
+#ifndef CONFIG_XEN
+static
+#endif
int teardown_irq(unsigned int irq, struct irqaction * old)
{
struct irq_desc *desc;
@@ -255,6 +267,13 @@
/* Found it - now remove it from the list of entries */
*pp = action->next;
+
+ /* Currently used only by UML, might disappear one
day.*/
+#ifdef CONFIG_IRQ_RELEASE_METHOD
+ if (desc->handler->release)
+ desc->handler->release(irq, dev_id);
+#endif
+
if (!desc->action) {
desc->status |= IRQ_DISABLED;
if (desc->handler->shutdown)
@@ -314,67 +333,6 @@
spin_unlock_irqrestore(&desc->lock,flags);
return;
}
-
-#else
-/**
- * free_irq - free an interrupt
- * @irq: Interrupt line to free
- * @dev_id: Device identity to free
- *
- * Remove an interrupt handler. The handler is removed and if the
- * interrupt line is no longer in use by any driver it is disabled.
- * On a shared IRQ the caller must ensure the interrupt is disabled
- * on the card it drives before calling this function. The function
- * does not return until any executing interrupts for this IRQ
- * have completed.
- *
- * This function must not be called from interrupt context.
- */
-void free_irq(unsigned int irq, void *dev_id)
-{
- struct irq_desc *desc;
- struct irqaction **p;
- unsigned long flags;
-
- if (irq >= NR_IRQS)
- return;
-
- desc = irq_desc + irq;
- spin_lock_irqsave(&desc->lock,flags);
- p = &desc->action;
- for (;;) {
- struct irqaction * action = *p;
-
- if (action) {
- struct irqaction **pp = p;
-
- p = &action->next;
- if (action->dev_id != dev_id)
- continue;
-
- /* Found it - now remove it from the list of entries */
- *pp = action->next;
- if (!desc->action) {
- desc->status |= IRQ_DISABLED;
- if (desc->handler->shutdown)
- desc->handler->shutdown(irq);
- else
- desc->handler->disable(irq);
- }
- spin_unlock_irqrestore(&desc->lock,flags);
- unregister_handler_proc(irq, action);
-
- /* Make sure it's not being used on another CPU */
- synchronize_irq(irq);
- kfree(action);
- return;
- }
- printk(KERN_ERR "Trying to free free IRQ%d\n",irq);
- spin_unlock_irqrestore(&desc->lock,flags);
- return;
- }
-}
-#endif
EXPORT_SYMBOL(free_irq);
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/lib/Kconfig.debug
--- a/linux-2.6-xen-sparse/lib/Kconfig.debug Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/lib/Kconfig.debug Tue Jan 31 19:55:22 2006
@@ -45,6 +45,25 @@
14 => 16 KB for uniprocessor
13 => 8 KB
12 => 4 KB
+
+config DETECT_SOFTLOCKUP
+ bool "Detect Soft Lockups"
+ depends on DEBUG_KERNEL
+ default y
+ help
+ Say Y here to enable the kernel to detect "soft lockups",
+ which are bugs that cause the kernel to loop in kernel
+ mode for more than 10 seconds, without giving other tasks a
+ chance to run.
+
+ When a soft-lockup is detected, the kernel will print the
+ current stack trace (which you should report), but the
+ system will stay locked up. This feature has negligible
+ overhead.
+
+ (Note that "hard lockups" are separate type of bugs that
+ can be detected via the NMI-watchdog, on platforms that
+ support it.)
config SCHEDSTATS
bool "Collect scheduler statistics"
@@ -141,7 +160,7 @@
config DEBUG_FS
bool "Debug Filesystem"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && SYSFS
help
debugfs is a virtual file system that kernel developers use to put
debugging files into. Enable this option to be able to read and
@@ -151,11 +170,11 @@
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
- depends on DEBUG_KERNEL && ((X86 && !X86_64) || CRIS || M68K ||
M68KNOMMU || FRV || UML)
+ depends on DEBUG_KERNEL && (X86 || CRIS || M68K || M68KNOMMU || FRV ||
UML)
default y if DEBUG_INFO && UML
help
If you say Y here the resulting kernel image will be slightly larger
- and slower, but it will give very useful debugging information.
- If you don't debug the kernel, you can say N, but we may not be able
- to solve problems without frame pointers.
+ and slower, but it might give very useful debugging information
+ on some architectures or you use external debuggers.
+ If you don't debug the kernel, you can say N.
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/mm/highmem.c
--- a/linux-2.6-xen-sparse/mm/highmem.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/mm/highmem.c Tue Jan 31 19:55:22 2006
@@ -30,7 +30,7 @@
static mempool_t *page_pool, *isa_page_pool;
-static void *page_pool_alloc(unsigned int __nocast gfp_mask, void *data)
+static void *page_pool_alloc(gfp_t gfp_mask, void *data)
{
unsigned int gfp = gfp_mask | (unsigned int) (long) data;
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/mm/memory.c
--- a/linux-2.6-xen-sparse/mm/memory.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/mm/memory.c Tue Jan 31 19:55:22 2006
@@ -58,7 +58,7 @@
#include <linux/swapops.h>
#include <linux/elf.h>
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NEED_MULTIPLE_NODES
/* use the per-pgdat data instead for discontigmem - mbligh */
unsigned long max_mapnr;
struct page *mem_map;
@@ -497,6 +497,17 @@
unsigned long next;
unsigned long addr = vma->vm_start;
unsigned long end = vma->vm_end;
+
+ /*
+ * Don't copy ptes where a page fault will fill them correctly.
+ * Fork becomes much lighter when there are big shared or private
+ * readonly mappings. The tradeoff is that copy_page_range is more
+ * efficient than faulting.
+ */
+ if (!(vma->vm_flags & (VM_HUGETLB|VM_NONLINEAR|VM_RESERVED))) {
+ if (!vma->anon_vma)
+ return 0;
+ }
if (is_vm_hugetlb_page(vma))
return copy_hugetlb_page_range(dst_mm, src_mm, vma);
@@ -551,7 +562,8 @@
page->index > details->last_index))
continue;
}
- ptent = ptep_get_and_clear(tlb->mm, addr, pte);
+ ptent = ptep_get_and_clear_full(tlb->mm, addr, pte,
+ tlb->fullmm);
tlb_remove_tlb_entry(tlb, pte, addr);
if (unlikely(!page))
continue;
@@ -579,7 +591,7 @@
continue;
if (!pte_file(ptent))
free_swap_and_cache(pte_to_swp_entry(ptent));
- pte_clear(tlb->mm, addr, pte);
+ pte_clear_full(tlb->mm, addr, pte, tlb->fullmm);
} while (pte++, addr += PAGE_SIZE, addr != end);
pte_unmap(pte - 1);
}
@@ -776,8 +788,8 @@
* Do a quick page-table lookup for a single page.
* mm->page_table_lock must be held.
*/
-static struct page *
-__follow_page(struct mm_struct *mm, unsigned long address, int read, int write)
+static struct page *__follow_page(struct mm_struct *mm, unsigned long address,
+ int read, int write, int accessed)
{
pgd_t *pgd;
pud_t *pud;
@@ -818,9 +830,11 @@
pfn = pte_pfn(pte);
if (pfn_valid(pfn)) {
page = pfn_to_page(pfn);
- if (write && !pte_dirty(pte) && !PageDirty(page))
- set_page_dirty(page);
- mark_page_accessed(page);
+ if (accessed) {
+ if (write && !pte_dirty(pte) &&!PageDirty(page))
+ set_page_dirty(page);
+ mark_page_accessed(page);
+ }
return page;
}
}
@@ -829,33 +843,21 @@
return NULL;
}
-struct page *
+inline struct page *
follow_page(struct mm_struct *mm, unsigned long address, int write)
{
- return __follow_page(mm, address, /*read*/0, write);
-}
-
-int
-check_user_page_readable(struct mm_struct *mm, unsigned long address)
-{
- return __follow_page(mm, address, /*read*/1, /*write*/0) != NULL;
-}
-
+ return __follow_page(mm, address, 0, write, 1);
+}
+
+/*
+ * check_user_page_readable() can be called frm niterrupt context by oprofile,
+ * so we need to avoid taking any non-irq-safe locks
+ */
+int check_user_page_readable(struct mm_struct *mm, unsigned long address)
+{
+ return __follow_page(mm, address, 1, 0, 0) != NULL;
+}
EXPORT_SYMBOL(check_user_page_readable);
-
-/*
- * Given a physical address, is there a useful struct page pointing to
- * it? This may become more complex in the future if we start dealing
- * with IO-aperture pages for direct-IO.
- */
-
-static inline struct page *get_page_map(struct page *page)
-{
- if (!pfn_valid(page_to_pfn(page)))
- return NULL;
- return page;
-}
-
static inline int
untouched_anonymous_page(struct mm_struct* mm, struct vm_area_struct *vma,
@@ -886,7 +888,6 @@
/* There is a pte slot for 'address' in 'mm'. */
return 0;
}
-
int get_user_pages(struct task_struct *tsk, struct mm_struct *mm,
unsigned long start, int len, int write, int force,
@@ -924,9 +925,13 @@
pud = pud_offset(pgd, pg);
BUG_ON(pud_none(*pud));
pmd = pmd_offset(pud, pg);
- BUG_ON(pmd_none(*pmd));
+ if (pmd_none(*pmd))
+ return i ? : -EFAULT;
pte = pte_offset_map(pmd, pg);
- BUG_ON(pte_none(*pte));
+ if (pte_none(*pte)) {
+ pte_unmap(pte);
+ return i ? : -EFAULT;
+ }
if (pages) {
pages[i] = pte_page(*pte);
get_page(pages[i]);
@@ -968,25 +973,37 @@
}
spin_lock(&mm->page_table_lock);
do {
- struct page *map;
- int lookup_write = write;
+ int write_access = write;
+ struct page *page;
cond_resched_lock(&mm->page_table_lock);
- while (!(map = follow_page(mm, start, lookup_write))) {
+ while (!(page = follow_page(mm, start, write_access))) {
+ int ret;
+
/*
* Shortcut for anonymous pages. We don't want
* to force the creation of pages tables for
- * insanly big anonymously mapped areas that
+ * insanely big anonymously mapped areas that
* nobody touched so far. This is important
* for doing a core dump for these mappings.
*/
- if (!lookup_write &&
- untouched_anonymous_page(mm,vma,start)) {
- map = ZERO_PAGE(start);
+ if (!write &&
untouched_anonymous_page(mm,vma,start)) {
+ page = ZERO_PAGE(start);
break;
}
spin_unlock(&mm->page_table_lock);
- switch (handle_mm_fault(mm,vma,start,write)) {
+ ret = __handle_mm_fault(mm, vma, start,
write_access);
+
+ /*
+ * The VM_FAULT_WRITE bit tells us that
do_wp_page has
+ * broken COW when necessary, even if
maybe_mkwrite
+ * decided not to set pte_write. We can thus
safely do
+ * subsequent page lookups as if they were
reads.
+ */
+ if (ret & VM_FAULT_WRITE)
+ write_access = 0;
+
+ switch (ret & ~VM_FAULT_WRITE) {
case VM_FAULT_MINOR:
tsk->min_flt++;
break;
@@ -1000,41 +1017,24 @@
default:
BUG();
}
- /*
- * Now that we have performed a write fault
- * and surely no longer have a shared page we
- * shouldn't write, we shouldn't ignore an
- * unwritable page in the page table if
- * we are forcing write access.
- */
- lookup_write = write && !force;
spin_lock(&mm->page_table_lock);
}
if (pages) {
- pages[i] = get_page_map(map);
- if (!pages[i]) {
- spin_unlock(&mm->page_table_lock);
- while (i--)
- page_cache_release(pages[i]);
- i = -EFAULT;
- goto out;
- }
- flush_dcache_page(pages[i]);
- if (!PageReserved(pages[i]))
- page_cache_get(pages[i]);
+ pages[i] = page;
+ flush_dcache_page(page);
+ if (!PageReserved(page))
+ page_cache_get(page);
}
if (vmas)
vmas[i] = vma;
i++;
start += PAGE_SIZE;
len--;
- } while(len && start < vma->vm_end);
+ } while (len && start < vma->vm_end);
spin_unlock(&mm->page_table_lock);
- } while(len);
-out:
+ } while (len);
return i;
}
-
EXPORT_SYMBOL(get_user_pages);
static int zeromap_pte_range(struct mm_struct *mm, pmd_t *pmd,
@@ -1181,7 +1181,7 @@
{
pgd_t *pgd;
unsigned long next;
- unsigned long end = addr + size;
+ unsigned long end = addr + PAGE_ALIGN(size);
struct mm_struct *mm = vma->vm_mm;
int err;
@@ -1366,6 +1366,7 @@
struct page *old_page, *new_page;
unsigned long pfn = pte_pfn(pte);
pte_t entry;
+ int ret;
#ifdef CONFIG_XEN
struct page invalid_page;
#endif
@@ -1394,7 +1395,7 @@
old_page = pfn_to_page(pfn);
#endif
- if (!TestSetPageLocked(old_page)) {
+ if (PageAnon(old_page) && !TestSetPageLocked(old_page)) {
int reuse = can_share_swap_page(old_page);
unlock_page(old_page);
if (reuse) {
@@ -1406,7 +1407,7 @@
lazy_mmu_prot_update(entry);
pte_unmap(page_table);
spin_unlock(&mm->page_table_lock);
- return VM_FAULT_MINOR;
+ return VM_FAULT_MINOR|VM_FAULT_WRITE;
}
}
pte_unmap(page_table);
@@ -1443,6 +1444,7 @@
/*
* Re-check the pte - we dropped the lock
*/
+ ret = VM_FAULT_MINOR;
spin_lock(&mm->page_table_lock);
page_table = pte_offset_map(pmd, address);
if (likely(pte_same(*page_table, pte))) {
@@ -1459,12 +1461,13 @@
/* Free the old page.. */
new_page = old_page;
+ ret |= VM_FAULT_WRITE;
}
pte_unmap(page_table);
page_cache_release(new_page);
page_cache_release(old_page);
spin_unlock(&mm->page_table_lock);
- return VM_FAULT_MINOR;
+ return ret;
no_new_page:
page_cache_release(old_page);
@@ -1623,7 +1626,7 @@
* unmap_mapping_range - unmap the portion of all mmaps
* in the specified address_space corresponding to the specified
* page range in the underlying file.
- * @address_space: the address space containing mmaps to be unmapped.
+ * @mapping: the address space containing mmaps to be unmapped.
* @holebegin: byte in first page to unmap, relative to the start of
* the underlying file. This will be rounded down to a PAGE_SIZE
* boundary. Note that this is different from vmtruncate(), which
@@ -1851,10 +1854,6 @@
}
/* The page isn't present yet, go ahead with the fault. */
-
- swap_free(entry);
- if (vm_swap_full())
- remove_exclusive_swap_page(page);
inc_mm_counter(mm, rss);
pte = mk_pte(page, vma->vm_page_prot);
@@ -1862,11 +1861,15 @@
pte = maybe_mkwrite(pte_mkdirty(pte), vma);
write_access = 0;
}
- unlock_page(page);
flush_icache_page(vma, page);
set_pte_at(mm, address, page_table, pte);
page_add_anon_rmap(page, vma, address);
+
+ swap_free(entry);
+ if (vm_swap_full())
+ remove_exclusive_swap_page(page);
+ unlock_page(page);
if (write_access) {
if (do_wp_page(mm, vma, address,
@@ -2093,7 +2096,7 @@
* Fall back to the linear mapping if the fs does not support
* ->populate:
*/
- if (!vma->vm_ops || !vma->vm_ops->populate ||
+ if (!vma->vm_ops->populate ||
(write_access && !(vma->vm_flags & VM_SHARED))) {
pte_clear(mm, address, pte);
return do_no_page(mm, vma, address, write_access, pte, pmd);
@@ -2156,7 +2159,6 @@
if (write_access) {
if (!pte_write(entry))
return do_wp_page(mm, vma, address, pte, pmd, entry);
-
entry = pte_mkdirty(entry);
}
entry = pte_mkyoung(entry);
@@ -2171,7 +2173,7 @@
/*
* By the time we get here, we already hold the mm semaphore
*/
-int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma,
+int __handle_mm_fault(struct mm_struct *mm, struct vm_area_struct * vma,
unsigned long address, int write_access)
{
pgd_t *pgd;
@@ -2183,8 +2185,8 @@
inc_page_state(pgfault);
- if (is_vm_hugetlb_page(vma))
- return VM_FAULT_SIGBUS; /* mapping truncation does this. */
+ if (unlikely(is_vm_hugetlb_page(vma)))
+ return hugetlb_fault(mm, vma, address, write_access);
/*
* We need the page table lock to synchronize with kswapd
@@ -2363,7 +2365,7 @@
#if !defined(__HAVE_ARCH_GATE_AREA)
#if defined(AT_SYSINFO_EHDR)
-struct vm_area_struct gate_vma;
+static struct vm_area_struct gate_vma;
static int __init gate_vma_init(void)
{
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/mm/mmap.c
--- a/linux-2.6-xen-sparse/mm/mmap.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/mm/mmap.c Tue Jan 31 19:55:22 2006
@@ -61,7 +61,7 @@
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
-int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
+int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
atomic_t vm_committed_space = ATOMIC_INIT(0);
/*
@@ -143,7 +143,11 @@
leave 3% of the size of this process for other processes */
allowed -= current->mm->total_vm / 32;
- if (atomic_read(&vm_committed_space) < allowed)
+ /*
+ * cast `allowed' as a signed long because vm_committed_space
+ * sometimes has a negative value
+ */
+ if (atomic_read(&vm_committed_space) < (long)allowed)
return 0;
vm_unacct_memory(pages);
@@ -199,13 +203,6 @@
kmem_cache_free(vm_area_cachep, vma);
}
-/*
- * sys_brk() for the most part doesn't need the global kernel
- * lock, except when an application is doing something nasty
- * like trying to un-brk an area that has already been mapped
- * to a regular file. in this case, the unmapping will need
- * to invoke file system routines that need the global lock.
- */
asmlinkage unsigned long sys_brk(unsigned long brk)
{
unsigned long rlim, retval;
@@ -1175,7 +1172,12 @@
(!vma || addr + len <= vma->vm_start))
return addr;
}
- start_addr = addr = mm->free_area_cache;
+ if (len > mm->cached_hole_size) {
+ start_addr = addr = mm->free_area_cache;
+ } else {
+ start_addr = addr = TASK_UNMAPPED_BASE;
+ mm->cached_hole_size = 0;
+ }
full_search:
for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
@@ -1186,7 +1188,9 @@
* some holes.
*/
if (start_addr != TASK_UNMAPPED_BASE) {
- start_addr = addr = TASK_UNMAPPED_BASE;
+ addr = TASK_UNMAPPED_BASE;
+ start_addr = addr;
+ mm->cached_hole_size = 0;
goto full_search;
}
return -ENOMEM;
@@ -1198,19 +1202,22 @@
mm->free_area_cache = addr + len;
return addr;
}
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
addr = vma->vm_end;
}
}
#endif
-void arch_unmap_area(struct vm_area_struct *area)
+void arch_unmap_area(struct mm_struct *mm, unsigned long addr)
{
/*
* Is this a new hole at the lowest possible address?
*/
- if (area->vm_start >= TASK_UNMAPPED_BASE &&
- area->vm_start < area->vm_mm->free_area_cache)
- area->vm_mm->free_area_cache = area->vm_start;
+ if (addr >= TASK_UNMAPPED_BASE && addr < mm->free_area_cache) {
+ mm->free_area_cache = addr;
+ mm->cached_hole_size = ~0UL;
+ }
}
/*
@@ -1240,6 +1247,12 @@
return addr;
}
+ /* check if free_area_cache is useful for us */
+ if (len <= mm->cached_hole_size) {
+ mm->cached_hole_size = 0;
+ mm->free_area_cache = mm->mmap_base;
+ }
+
/* either no address requested or can't fit in requested address hole */
addr = mm->free_area_cache;
@@ -1250,6 +1263,9 @@
/* remember the address as a hint for next time */
return (mm->free_area_cache = addr-len);
}
+
+ if (mm->mmap_base < len)
+ goto bottomup;
addr = mm->mmap_base-len;
@@ -1264,38 +1280,45 @@
/* remember the address as a hint for next time */
return (mm->free_area_cache = addr);
+ /* remember the largest hole we saw so far */
+ if (addr + mm->cached_hole_size < vma->vm_start)
+ mm->cached_hole_size = vma->vm_start - addr;
+
/* try just below the current vma->vm_start */
addr = vma->vm_start-len;
} while (len < vma->vm_start);
+bottomup:
/*
* A failed mmap() very likely causes application failure,
* so fall back to the bottom-up function here. This scenario
* can happen with large stack limits and large mmap()
* allocations.
*/
- mm->free_area_cache = TASK_UNMAPPED_BASE;
+ mm->cached_hole_size = ~0UL;
+ mm->free_area_cache = TASK_UNMAPPED_BASE;
addr = arch_get_unmapped_area(filp, addr0, len, pgoff, flags);
/*
* Restore the topdown base:
*/
mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = ~0UL;
return addr;
}
#endif
-void arch_unmap_area_topdown(struct vm_area_struct *area)
+void arch_unmap_area_topdown(struct mm_struct *mm, unsigned long addr)
{
/*
* Is this a new hole at the highest possible address?
*/
- if (area->vm_end > area->vm_mm->free_area_cache)
- area->vm_mm->free_area_cache = area->vm_end;
+ if (addr > mm->free_area_cache)
+ mm->free_area_cache = addr;
/* dont allow allocations above current base */
- if (area->vm_mm->free_area_cache > area->vm_mm->mmap_base)
- area->vm_mm->free_area_cache = area->vm_mm->mmap_base;
+ if (mm->free_area_cache > mm->mmap_base)
+ mm->free_area_cache = mm->mmap_base;
}
unsigned long
@@ -1595,7 +1618,6 @@
if (area->vm_flags & VM_LOCKED)
area->vm_mm->locked_vm -= len >> PAGE_SHIFT;
vm_stat_unaccount(area);
- area->vm_mm->unmap_area(area);
remove_vm_struct(area);
}
@@ -1618,7 +1640,7 @@
/*
* Get rid of page table information in the indicated region.
*
- * Called with the page table lock held.
+ * Called with the mm semaphore held.
*/
static void unmap_region(struct mm_struct *mm,
struct vm_area_struct *vma, struct vm_area_struct *prev,
@@ -1649,6 +1671,7 @@
{
struct vm_area_struct **insertion_point;
struct vm_area_struct *tail_vma = NULL;
+ unsigned long addr;
insertion_point = (prev ? &prev->vm_next : &mm->mmap);
do {
@@ -1659,6 +1682,11 @@
} while (vma && vma->vm_start < end);
*insertion_point = vma;
tail_vma->vm_next = NULL;
+ if (mm->unmap_area == arch_unmap_area)
+ addr = prev ? prev->vm_end : mm->mmap_base;
+ else
+ addr = vma ? vma->vm_start : mm->mmap_base;
+ mm->unmap_area(mm, addr);
mm->mmap_cache = NULL; /* Kill the cache. */
}
@@ -1907,6 +1935,7 @@
#ifdef arch_exit_mmap
arch_exit_mmap(mm);
#endif
+
lru_add_drain();
spin_lock(&mm->page_table_lock);
@@ -1967,6 +1996,9 @@
}
__vma = find_vma_prepare(mm,vma->vm_start,&prev,&rb_link,&rb_parent);
if (__vma && __vma->vm_start < vma->vm_end)
+ return -ENOMEM;
+ if ((vma->vm_flags & VM_ACCOUNT) &&
+ security_vm_enough_memory(vma_pages(vma)))
return -ENOMEM;
vma_link(mm, vma, prev, rb_link, rb_parent);
return 0;
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/mm/page_alloc.c
--- a/linux-2.6-xen-sparse/mm/page_alloc.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/mm/page_alloc.c Tue Jan 31 19:55:22 2006
@@ -22,6 +22,7 @@
#include <linux/pagemap.h>
#include <linux/bootmem.h>
#include <linux/compiler.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/pagevec.h>
@@ -42,13 +43,13 @@
* MCD - HACK: Find somewhere to initialize this EARLY, or make this
* initializer cleaner
*/
-nodemask_t node_online_map = { { [0] = 1UL } };
+nodemask_t node_online_map __read_mostly = { { [0] = 1UL } };
EXPORT_SYMBOL(node_online_map);
-nodemask_t node_possible_map = NODE_MASK_ALL;
+nodemask_t node_possible_map __read_mostly = NODE_MASK_ALL;
EXPORT_SYMBOL(node_possible_map);
-struct pglist_data *pgdat_list;
-unsigned long totalram_pages;
-unsigned long totalhigh_pages;
+struct pglist_data *pgdat_list __read_mostly;
+unsigned long totalram_pages __read_mostly;
+unsigned long totalhigh_pages __read_mostly;
long nr_swap_pages;
/*
@@ -68,7 +69,7 @@
* Used by page_zone() to look up the address of the struct zone whose
* id is encoded in the upper bits of page->flags
*/
-struct zone *zone_table[1 << (ZONES_SHIFT + NODES_SHIFT)];
+struct zone *zone_table[1 << ZONETABLE_SHIFT] __read_mostly;
EXPORT_SYMBOL(zone_table);
static char *zone_names[MAX_NR_ZONES] = { "DMA", "Normal", "HighMem" };
@@ -105,17 +106,19 @@
printk(KERN_EMERG "Backtrace:\n");
dump_stack();
printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n");
- page->flags &= ~(1 << PG_private |
+ page->flags &= ~(1 << PG_lru |
+ 1 << PG_private |
1 << PG_locked |
- 1 << PG_lru |
1 << PG_active |
1 << PG_dirty |
+ 1 << PG_reclaim |
+ 1 << PG_slab |
1 << PG_swapcache |
1 << PG_writeback);
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
- tainted |= TAINT_BAD_PAGE;
+ add_taint(TAINT_BAD_PAGE);
}
#ifndef CONFIG_HUGETLB_PAGE
@@ -327,13 +330,13 @@
1 << PG_writeback )))
bad_page(function, page);
if (PageDirty(page))
- ClearPageDirty(page);
+ __ClearPageDirty(page);
}
/*
* Frees a list of pages.
* Assumes all pages on list are in same zone, and of same order.
- * count is the number of pages to free, or 0 for all on the list.
+ * count is the number of pages to free.
*
* If the zone was previously in an "all pages pinned" state then look to
* see if this freeing clears that state.
@@ -441,14 +444,17 @@
*/
static void prep_new_page(struct page *page, int order)
{
- if (page->mapping || page_mapcount(page) ||
- (page->flags & (
+ if ( page_mapcount(page) ||
+ page->mapping != NULL ||
+ page_count(page) != 0 ||
+ (page->flags & (
+ 1 << PG_lru |
1 << PG_private |
1 << PG_locked |
- 1 << PG_lru |
1 << PG_active |
1 << PG_dirty |
1 << PG_reclaim |
+ 1 << PG_slab |
1 << PG_swapcache |
1 << PG_writeback )))
bad_page(__FUNCTION__, page);
@@ -512,6 +518,36 @@
return allocated;
}
+#ifdef CONFIG_NUMA
+/* Called from the slab reaper to drain remote pagesets */
+void drain_remote_pages(void)
+{
+ struct zone *zone;
+ int i;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ for_each_zone(zone) {
+ struct per_cpu_pageset *pset;
+
+ /* Do not drain local pagesets */
+ if (zone->zone_pgdat->node_id == numa_node_id())
+ continue;
+
+ pset = zone->pageset[smp_processor_id()];
+ for (i = 0; i < ARRAY_SIZE(pset->pcp); i++) {
+ struct per_cpu_pages *pcp;
+
+ pcp = &pset->pcp[i];
+ if (pcp->count)
+ pcp->count -= free_pages_bulk(zone, pcp->count,
+ &pcp->list, 0);
+ }
+ }
+ local_irq_restore(flags);
+}
+#endif
+
#if defined(CONFIG_PM) || defined(CONFIG_HOTPLUG_CPU)
static void __drain_pages(unsigned int cpu)
{
@@ -521,7 +557,7 @@
for_each_zone(zone) {
struct per_cpu_pageset *pset;
- pset = &zone->pageset[cpu];
+ pset = zone_pcp(zone, cpu);
for (i = 0; i < ARRAY_SIZE(pset->pcp); i++) {
struct per_cpu_pages *pcp;
@@ -584,12 +620,12 @@
local_irq_save(flags);
cpu = smp_processor_id();
- p = &z->pageset[cpu];
+ p = zone_pcp(z,cpu);
if (pg == orig) {
- z->pageset[cpu].numa_hit++;
+ p->numa_hit++;
} else {
p->numa_miss++;
- zonelist->zones[0]->pageset[cpu].numa_foreign++;
+ zone_pcp(zonelist->zones[0], cpu)->numa_foreign++;
}
if (pg == NODE_DATA(numa_node_id()))
p->local_node++;
@@ -617,12 +653,12 @@
if (PageAnon(page))
page->mapping = NULL;
free_pages_check(__FUNCTION__, page);
- pcp = &zone->pageset[get_cpu()].pcp[cold];
+ pcp = &zone_pcp(zone, get_cpu())->pcp[cold];
local_irq_save(flags);
+ list_add(&page->lru, &pcp->list);
+ pcp->count++;
if (pcp->count >= pcp->high)
pcp->count -= free_pages_bulk(zone, pcp->batch, &pcp->list, 0);
- list_add(&page->lru, &pcp->list);
- pcp->count++;
local_irq_restore(flags);
put_cpu();
}
@@ -637,7 +673,7 @@
free_hot_cold_page(page, 1);
}
-static inline void prep_zero_page(struct page *page, int order, unsigned int
__nocast gfp_flags)
+static inline void prep_zero_page(struct page *page, int order, gfp_t
gfp_flags)
{
int i;
@@ -652,7 +688,7 @@
* or two.
*/
static struct page *
-buffered_rmqueue(struct zone *zone, int order, unsigned int __nocast gfp_flags)
+buffered_rmqueue(struct zone *zone, int order, gfp_t gfp_flags)
{
unsigned long flags;
struct page *page = NULL;
@@ -661,7 +697,7 @@
if (order == 0) {
struct per_cpu_pages *pcp;
- pcp = &zone->pageset[get_cpu()].pcp[cold];
+ pcp = &zone_pcp(zone, get_cpu())->pcp[cold];
local_irq_save(flags);
if (pcp->count <= pcp->low)
pcp->count += rmqueue_bulk(zone, 0,
@@ -726,11 +762,21 @@
return 1;
}
+static inline int
+should_reclaim_zone(struct zone *z, gfp_t gfp_mask)
+{
+ if (!z->reclaim_pages)
+ return 0;
+ if (gfp_mask & __GFP_NORECLAIM)
+ return 0;
+ return 1;
+}
+
/*
* This is the 'heart' of the zoned buddy allocator.
*/
struct page * fastcall
-__alloc_pages(unsigned int __nocast gfp_mask, unsigned int order,
+__alloc_pages(gfp_t gfp_mask, unsigned int order,
struct zonelist *zonelist)
{
const int wait = gfp_mask & __GFP_WAIT;
@@ -762,16 +808,34 @@
classzone_idx = zone_idx(zones[0]);
- restart:
- /* Go through the zonelist once, looking for a zone with enough free */
+restart:
+ /*
+ * Go through the zonelist once, looking for a zone with enough free.
+ * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
+ */
for (i = 0; (z = zones[i]) != NULL; i++) {
-
+ int do_reclaim = should_reclaim_zone(z, gfp_mask);
+
+ if (!cpuset_zone_allowed(z, __GFP_HARDWALL))
+ continue;
+
+ /*
+ * If the zone is to attempt early page reclaim then this loop
+ * will try to reclaim pages and check the watermark a second
+ * time before giving up and falling back to the next zone.
+ */
+zone_reclaim_retry:
if (!zone_watermark_ok(z, order, z->pages_low,
- classzone_idx, 0, 0))
- continue;
-
- if (!cpuset_zone_allowed(z))
- continue;
+ classzone_idx, 0, 0)) {
+ if (!do_reclaim)
+ continue;
+ else {
+ zone_reclaim(z, gfp_mask, order);
+ /* Only try reclaim once */
+ do_reclaim = 0;
+ goto zone_reclaim_retry;
+ }
+ }
page = buffered_rmqueue(z, order, gfp_mask);
if (page)
@@ -787,6 +851,7 @@
*
* This is the last chance, in general, before the goto nopage.
* Ignore cpuset if GFP_ATOMIC (!wait) rather than fail alloc.
+ * See also cpuset_zone_allowed() comment in kernel/cpuset.c.
*/
for (i = 0; (z = zones[i]) != NULL; i++) {
if (!zone_watermark_ok(z, order, z->pages_min,
@@ -794,7 +859,7 @@
gfp_mask & __GFP_HIGH))
continue;
- if (wait && !cpuset_zone_allowed(z))
+ if (wait && !cpuset_zone_allowed(z, gfp_mask))
continue;
page = buffered_rmqueue(z, order, gfp_mask);
@@ -809,7 +874,7 @@
if (!(gfp_mask & __GFP_NOMEMALLOC)) {
/* go through the zonelist yet again, ignoring mins */
for (i = 0; (z = zones[i]) != NULL; i++) {
- if (!cpuset_zone_allowed(z))
+ if (!cpuset_zone_allowed(z, gfp_mask))
continue;
page = buffered_rmqueue(z, order, gfp_mask);
if (page)
@@ -831,7 +896,7 @@
reclaim_state.reclaimed_slab = 0;
p->reclaim_state = &reclaim_state;
- did_some_progress = try_to_free_pages(zones, gfp_mask, order);
+ did_some_progress = try_to_free_pages(zones, gfp_mask);
p->reclaim_state = NULL;
p->flags &= ~PF_MEMALLOC;
@@ -839,19 +904,13 @@
cond_resched();
if (likely(did_some_progress)) {
- /*
- * Go through the zonelist yet one more time, keep
- * very high watermark here, this is only to catch
- * a parallel oom killing, we must fail if we're still
- * under heavy pressure.
- */
for (i = 0; (z = zones[i]) != NULL; i++) {
if (!zone_watermark_ok(z, order, z->pages_min,
classzone_idx, can_try_harder,
gfp_mask & __GFP_HIGH))
continue;
- if (!cpuset_zone_allowed(z))
+ if (!cpuset_zone_allowed(z, gfp_mask))
continue;
page = buffered_rmqueue(z, order, gfp_mask);
@@ -870,7 +929,7 @@
classzone_idx, 0, 0))
continue;
- if (!cpuset_zone_allowed(z))
+ if (!cpuset_zone_allowed(z, __GFP_HARDWALL))
continue;
page = buffered_rmqueue(z, order, gfp_mask);
@@ -878,7 +937,7 @@
goto got_pg;
}
- out_of_memory(gfp_mask);
+ out_of_memory(gfp_mask, order);
goto restart;
}
@@ -907,6 +966,7 @@
" order:%d, mode:0x%x\n",
p->comm, order, gfp_mask);
dump_stack();
+ show_mem();
}
return NULL;
got_pg:
@@ -919,7 +979,7 @@
/*
* Common helper functions.
*/
-fastcall unsigned long __get_free_pages(unsigned int __nocast gfp_mask,
unsigned int order)
+fastcall unsigned long __get_free_pages(gfp_t gfp_mask, unsigned int order)
{
struct page * page;
page = alloc_pages(gfp_mask, order);
@@ -930,7 +990,7 @@
EXPORT_SYMBOL(__get_free_pages);
-fastcall unsigned long get_zeroed_page(unsigned int __nocast gfp_mask)
+fastcall unsigned long get_zeroed_page(gfp_t gfp_mask)
{
struct page * page;
@@ -1008,20 +1068,19 @@
static unsigned int nr_free_zone_pages(int offset)
{
- pg_data_t *pgdat;
+ /* Just pick one node, since fallback list is circular */
+ pg_data_t *pgdat = NODE_DATA(numa_node_id());
unsigned int sum = 0;
- for_each_pgdat(pgdat) {
- struct zonelist *zonelist = pgdat->node_zonelists + offset;
- struct zone **zonep = zonelist->zones;
- struct zone *zone;
-
- for (zone = *zonep++; zone; zone = *zonep++) {
- unsigned long size = zone->present_pages;
- unsigned long high = zone->pages_high;
- if (size > high)
- sum += size - high;
- }
+ struct zonelist *zonelist = pgdat->node_zonelists + offset;
+ struct zone **zonep = zonelist->zones;
+ struct zone *zone;
+
+ for (zone = *zonep++; zone; zone = *zonep++) {
+ unsigned long size = zone->present_pages;
+ unsigned long high = zone->pages_high;
+ if (size > high)
+ sum += size - high;
}
return sum;
@@ -1078,19 +1137,20 @@
DEFINE_PER_CPU(long, nr_pagecache_local) = 0;
#endif
-void __get_page_state(struct page_state *ret, int nr)
+void __get_page_state(struct page_state *ret, int nr, cpumask_t *cpumask)
{
int cpu = 0;
memset(ret, 0, sizeof(*ret));
-
- cpu = first_cpu(cpu_online_map);
+ cpus_and(*cpumask, *cpumask, cpu_online_map);
+
+ cpu = first_cpu(*cpumask);
while (cpu < NR_CPUS) {
unsigned long *in, *out, off;
in = (unsigned long *)&per_cpu(page_states, cpu);
- cpu = next_cpu(cpu, cpu_online_map);
+ cpu = next_cpu(cpu, *cpumask);
if (cpu < NR_CPUS)
prefetch(&per_cpu(page_states, cpu));
@@ -1101,22 +1161,36 @@
}
}
-void get_page_state(struct page_state *ret)
+void get_page_state_node(struct page_state *ret, int node)
{
int nr;
+ cpumask_t mask = node_to_cpumask(node);
nr = offsetof(struct page_state, GET_PAGE_STATE_LAST);
nr /= sizeof(unsigned long);
- __get_page_state(ret, nr + 1);
+ __get_page_state(ret, nr+1, &mask);
+}
+
+void get_page_state(struct page_state *ret)
+{
+ int nr;
+ cpumask_t mask = CPU_MASK_ALL;
+
+ nr = offsetof(struct page_state, GET_PAGE_STATE_LAST);
+ nr /= sizeof(unsigned long);
+
+ __get_page_state(ret, nr + 1, &mask);
}
void get_full_page_state(struct page_state *ret)
{
- __get_page_state(ret, sizeof(*ret) / sizeof(unsigned long));
-}
-
-unsigned long __read_page_state(unsigned offset)
+ cpumask_t mask = CPU_MASK_ALL;
+
+ __get_page_state(ret, sizeof(*ret) / sizeof(unsigned long), &mask);
+}
+
+unsigned long __read_page_state(unsigned long offset)
{
unsigned long ret = 0;
int cpu;
@@ -1130,7 +1204,7 @@
return ret;
}
-void __mod_page_state(unsigned offset, unsigned long delta)
+void __mod_page_state(unsigned long offset, unsigned long delta)
{
unsigned long flags;
void* ptr;
@@ -1239,22 +1313,23 @@
if (!cpu_possible(cpu))
continue;
- pageset = zone->pageset + cpu;
+ pageset = zone_pcp(zone, cpu);
for (temperature = 0; temperature < 2; temperature++)
- printk("cpu %d %s: low %d, high %d, batch %d\n",
+ printk("cpu %d %s: low %d, high %d, batch %d
used:%d\n",
cpu,
temperature ? "cold" : "hot",
pageset->pcp[temperature].low,
pageset->pcp[temperature].high,
- pageset->pcp[temperature].batch);
+ pageset->pcp[temperature].batch,
+ pageset->pcp[temperature].count);
}
}
get_page_state(&ps);
get_zone_counts(&active, &inactive, &free);
- printk("\nFree pages: %11ukB (%ukB HighMem)\n",
+ printk("Free pages: %11ukB (%ukB HighMem)\n",
K(nr_free_pages()),
K(nr_free_highpages()));
@@ -1589,11 +1664,17 @@
void __init memmap_init_zone(unsigned long size, int nid, unsigned long zone,
unsigned long start_pfn)
{
- struct page *start = pfn_to_page(start_pfn);
struct page *page;
-
- for (page = start; page < (start + size); page++) {
- set_page_zone(page, NODEZONE(nid, zone));
+ unsigned long end_pfn = start_pfn + size;
+ unsigned long pfn;
+
+ for (pfn = start_pfn; pfn < end_pfn; pfn++, page++) {
+ if (!early_pfn_valid(pfn))
+ continue;
+ if (!early_pfn_in_nid(pfn, nid))
+ continue;
+ page = pfn_to_page(pfn);
+ set_page_links(page, zone, nid, pfn);
set_page_count(page, 0);
reset_page_mapcount(page);
SetPageReserved(page);
@@ -1601,9 +1682,8 @@
#ifdef WANT_PAGE_VIRTUAL
/* The shift won't overflow because ZONE_NORMAL is below 4G. */
if (!is_highmem_idx(zone))
- set_page_address(page, __va(start_pfn << PAGE_SHIFT));
+ set_page_address(page, __va(pfn << PAGE_SHIFT));
#endif
- start_pfn++;
}
}
@@ -1617,11 +1697,183 @@
}
}
+#define ZONETABLE_INDEX(x, zone_nr) ((x << ZONES_SHIFT) | zone_nr)
+void zonetable_add(struct zone *zone, int nid, int zid, unsigned long pfn,
+ unsigned long size)
+{
+ unsigned long snum = pfn_to_section_nr(pfn);
+ unsigned long end = pfn_to_section_nr(pfn + size);
+
+ if (FLAGS_HAS_NODE)
+ zone_table[ZONETABLE_INDEX(nid, zid)] = zone;
+ else
+ for (; snum <= end; snum++)
+ zone_table[ZONETABLE_INDEX(snum, zid)] = zone;
+}
+
#ifndef __HAVE_ARCH_MEMMAP_INIT
#define memmap_init(size, nid, zone, start_pfn) \
memmap_init_zone((size), (nid), (zone), (start_pfn))
#endif
+static int __devinit zone_batchsize(struct zone *zone)
+{
+ int batch;
+
+ /*
+ * The per-cpu-pages pools are set to around 1000th of the
+ * size of the zone. But no more than 1/4 of a meg - there's
+ * no point in going beyond the size of L2 cache.
+ *
+ * OK, so we don't know how big the cache is. So guess.
+ */
+ batch = zone->present_pages / 1024;
+ if (batch * PAGE_SIZE > 256 * 1024)
+ batch = (256 * 1024) / PAGE_SIZE;
+ batch /= 4; /* We effectively *= 4 below */
+ if (batch < 1)
+ batch = 1;
+
+ /*
+ * Clamp the batch to a 2^n - 1 value. Having a power
+ * of 2 value was found to be more likely to have
+ * suboptimal cache aliasing properties in some cases.
+ *
+ * For example if 2 tasks are alternately allocating
+ * batches of pages, one task can end up with a lot
+ * of pages of one half of the possible page colors
+ * and the other with pages of the other colors.
+ */
+ batch = (1 << fls(batch + batch/2)) - 1;
+ return batch;
+}
+
+inline void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
+{
+ struct per_cpu_pages *pcp;
+
+ memset(p, 0, sizeof(*p));
+
+ pcp = &p->pcp[0]; /* hot */
+ pcp->count = 0;
+ pcp->low = 2 * batch;
+ pcp->high = 6 * batch;
+ pcp->batch = max(1UL, 1 * batch);
+ INIT_LIST_HEAD(&pcp->list);
+
+ pcp = &p->pcp[1]; /* cold*/
+ pcp->count = 0;
+ pcp->low = 0;
+ pcp->high = 2 * batch;
+ pcp->batch = max(1UL, 1 * batch);
+ INIT_LIST_HEAD(&pcp->list);
+}
+
+#ifdef CONFIG_NUMA
+/*
+ * Boot pageset table. One per cpu which is going to be used for all
+ * zones and all nodes. The parameters will be set in such a way
+ * that an item put on a list will immediately be handed over to
+ * the buddy list. This is safe since pageset manipulation is done
+ * with interrupts disabled.
+ *
+ * Some NUMA counter updates may also be caught by the boot pagesets.
+ *
+ * The boot_pagesets must be kept even after bootup is complete for
+ * unused processors and/or zones. They do play a role for bootstrapping
+ * hotplugged processors.
+ *
+ * zoneinfo_show() and maybe other functions do
+ * not check if the processor is online before following the pageset pointer.
+ * Other parts of the kernel may not check if the zone is available.
+ */
+static struct per_cpu_pageset
+ boot_pageset[NR_CPUS];
+
+/*
+ * Dynamically allocate memory for the
+ * per cpu pageset array in struct zone.
+ */
+static int __devinit process_zones(int cpu)
+{
+ struct zone *zone, *dzone;
+
+ for_each_zone(zone) {
+
+ zone->pageset[cpu] = kmalloc_node(sizeof(struct
per_cpu_pageset),
+ GFP_KERNEL, cpu_to_node(cpu));
+ if (!zone->pageset[cpu])
+ goto bad;
+
+ setup_pageset(zone->pageset[cpu], zone_batchsize(zone));
+ }
+
+ return 0;
+bad:
+ for_each_zone(dzone) {
+ if (dzone == zone)
+ break;
+ kfree(dzone->pageset[cpu]);
+ dzone->pageset[cpu] = NULL;
+ }
+ return -ENOMEM;
+}
+
+static inline void free_zone_pagesets(int cpu)
+{
+#ifdef CONFIG_NUMA
+ struct zone *zone;
+
+ for_each_zone(zone) {
+ struct per_cpu_pageset *pset = zone_pcp(zone, cpu);
+
+ zone_pcp(zone, cpu) = NULL;
+ kfree(pset);
+ }
+#endif
+}
+
+static int __devinit pageset_cpuup_callback(struct notifier_block *nfb,
+ unsigned long action,
+ void *hcpu)
+{
+ int cpu = (long)hcpu;
+ int ret = NOTIFY_OK;
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ if (process_zones(cpu))
+ ret = NOTIFY_BAD;
+ break;
+#ifdef CONFIG_HOTPLUG_CPU
+ case CPU_DEAD:
+ free_zone_pagesets(cpu);
+ break;
+#endif
+ default:
+ break;
+ }
+ return ret;
+}
+
+static struct notifier_block pageset_notifier =
+ { &pageset_cpuup_callback, NULL, 0 };
+
+void __init setup_per_cpu_pageset()
+{
+ int err;
+
+ /* Initialize per_cpu_pageset for cpu 0.
+ * A cpuup callback will do this for every cpu
+ * as it comes online
+ */
+ err = process_zones(smp_processor_id());
+ BUG_ON(err);
+ register_cpu_notifier(&pageset_notifier);
+}
+
+#endif
+
/*
* Set up the zone data structures:
* - mark all pages reserved
@@ -1632,7 +1884,6 @@
unsigned long *zones_size, unsigned long *zholes_size)
{
unsigned long i, j;
- const unsigned long zone_required_alignment = 1UL << (MAX_ORDER-1);
int cpu, nid = pgdat->node_id;
unsigned long zone_start_pfn = pgdat->node_start_pfn;
@@ -1645,7 +1896,6 @@
unsigned long size, realsize;
unsigned long batch;
- zone_table[NODEZONE(nid, j)] = zone;
realsize = size = zones_size[j];
if (zholes_size)
realsize -= zholes_size[j];
@@ -1664,48 +1914,16 @@
zone->temp_priority = zone->prev_priority = DEF_PRIORITY;
- /*
- * The per-cpu-pages pools are set to around 1000th of the
- * size of the zone. But no more than 1/4 of a meg - there's
- * no point in going beyond the size of L2 cache.
- *
- * OK, so we don't know how big the cache is. So guess.
- */
- batch = zone->present_pages / 1024;
- if (batch * PAGE_SIZE > 256 * 1024)
- batch = (256 * 1024) / PAGE_SIZE;
- batch /= 4; /* We effectively *= 4 below */
- if (batch < 1)
- batch = 1;
-
- /*
- * Clamp the batch to a 2^n - 1 value. Having a power
- * of 2 value was found to be more likely to have
- * suboptimal cache aliasing properties in some cases.
- *
- * For example if 2 tasks are alternately allocating
- * batches of pages, one task can end up with a lot
- * of pages of one half of the possible page colors
- * and the other with pages of the other colors.
- */
- batch = (1 << fls(batch + batch/2)) - 1;
+ batch = zone_batchsize(zone);
for (cpu = 0; cpu < NR_CPUS; cpu++) {
- struct per_cpu_pages *pcp;
-
- pcp = &zone->pageset[cpu].pcp[0]; /* hot */
- pcp->count = 0;
- pcp->low = 2 * batch;
- pcp->high = 6 * batch;
- pcp->batch = 1 * batch;
- INIT_LIST_HEAD(&pcp->list);
-
- pcp = &zone->pageset[cpu].pcp[1]; /* cold */
- pcp->count = 0;
- pcp->low = 0;
- pcp->high = 2 * batch;
- pcp->batch = 1 * batch;
- INIT_LIST_HEAD(&pcp->list);
+#ifdef CONFIG_NUMA
+ /* Early boot. Slab allocator not functional yet */
+ zone->pageset[cpu] = &boot_pageset[cpu];
+ setup_pageset(&boot_pageset[cpu],0);
+#else
+ setup_pageset(zone_pcp(zone,cpu), batch);
+#endif
}
printk(KERN_DEBUG " %s zone: %lu pages, LIFO batch:%lu\n",
zone_names[j], realsize, batch);
@@ -1715,6 +1933,7 @@
zone->nr_scan_inactive = 0;
zone->nr_active = 0;
zone->nr_inactive = 0;
+ atomic_set(&zone->reclaim_in_progress, 0);
if (!size)
continue;
@@ -1737,11 +1956,10 @@
zone->zone_mem_map = pfn_to_page(zone_start_pfn);
zone->zone_start_pfn = zone_start_pfn;
- if ((zone_start_pfn) & (zone_required_alignment-1))
- printk(KERN_CRIT "BUG: wrong zone alignment, it will
crash\n");
-
memmap_init(size, nid, j, zone_start_pfn);
+ zonetable_add(zone, nid, j, zone_start_pfn, size);
+
zone_start_pfn += size;
zone_init_free_lists(pgdat, zone, zone->spanned_pages);
@@ -1750,24 +1968,30 @@
static void __init alloc_node_mem_map(struct pglist_data *pgdat)
{
- unsigned long size;
-
/* Skip empty nodes */
if (!pgdat->node_spanned_pages)
return;
+#ifdef CONFIG_FLAT_NODE_MEM_MAP
/* ia64 gets its own node_mem_map, before this, without bootmem */
if (!pgdat->node_mem_map) {
+ unsigned long size;
+ struct page *map;
+
size = (pgdat->node_spanned_pages + 1) * sizeof(struct page);
- pgdat->node_mem_map = alloc_bootmem_node(pgdat, size);
- }
-#ifndef CONFIG_DISCONTIGMEM
+ map = alloc_remap(pgdat->node_id, size);
+ if (!map)
+ map = alloc_bootmem_node(pgdat, size);
+ pgdat->node_mem_map = map;
+ }
+#ifdef CONFIG_FLATMEM
/*
* With no DISCONTIG, the global mem_map is just set as node 0's
*/
if (pgdat == NODE_DATA(0))
mem_map = NODE_DATA(0)->node_mem_map;
#endif
+#endif /* CONFIG_FLAT_NODE_MEM_MAP */
}
void __init free_area_init_node(int nid, struct pglist_data *pgdat,
@@ -1783,18 +2007,18 @@
free_area_init_core(pgdat, zones_size, zholes_size);
}
-#ifndef CONFIG_DISCONTIGMEM
+#ifndef CONFIG_NEED_MULTIPLE_NODES
static bootmem_data_t contig_bootmem_data;
struct pglist_data contig_page_data = { .bdata = &contig_bootmem_data };
EXPORT_SYMBOL(contig_page_data);
+#endif
void __init free_area_init(unsigned long *zones_size)
{
- free_area_init_node(0, &contig_page_data, zones_size,
+ free_area_init_node(0, NODE_DATA(0), zones_size,
__pa(PAGE_OFFSET) >> PAGE_SHIFT, NULL);
}
-#endif
#ifdef CONFIG_PROC_FS
@@ -1853,6 +2077,115 @@
.next = frag_next,
.stop = frag_stop,
.show = frag_show,
+};
+
+/*
+ * Output information about zones in @pgdat.
+ */
+static int zoneinfo_show(struct seq_file *m, void *arg)
+{
+ pg_data_t *pgdat = arg;
+ struct zone *zone;
+ struct zone *node_zones = pgdat->node_zones;
+ unsigned long flags;
+
+ for (zone = node_zones; zone - node_zones < MAX_NR_ZONES; zone++) {
+ int i;
+
+ if (!zone->present_pages)
+ continue;
+
+ spin_lock_irqsave(&zone->lock, flags);
+ seq_printf(m, "Node %d, zone %8s", pgdat->node_id, zone->name);
+ seq_printf(m,
+ "\n pages free %lu"
+ "\n min %lu"
+ "\n low %lu"
+ "\n high %lu"
+ "\n active %lu"
+ "\n inactive %lu"
+ "\n scanned %lu (a: %lu i: %lu)"
+ "\n spanned %lu"
+ "\n present %lu",
+ zone->free_pages,
+ zone->pages_min,
+ zone->pages_low,
+ zone->pages_high,
+ zone->nr_active,
+ zone->nr_inactive,
+ zone->pages_scanned,
+ zone->nr_scan_active, zone->nr_scan_inactive,
+ zone->spanned_pages,
+ zone->present_pages);
+ seq_printf(m,
+ "\n protection: (%lu",
+ zone->lowmem_reserve[0]);
+ for (i = 1; i < ARRAY_SIZE(zone->lowmem_reserve); i++)
+ seq_printf(m, ", %lu", zone->lowmem_reserve[i]);
+ seq_printf(m,
+ ")"
+ "\n pagesets");
+ for (i = 0; i < ARRAY_SIZE(zone->pageset); i++) {
+ struct per_cpu_pageset *pageset;
+ int j;
+
+ pageset = zone_pcp(zone, i);
+ for (j = 0; j < ARRAY_SIZE(pageset->pcp); j++) {
+ if (pageset->pcp[j].count)
+ break;
+ }
+ if (j == ARRAY_SIZE(pageset->pcp))
+ continue;
+ for (j = 0; j < ARRAY_SIZE(pageset->pcp); j++) {
+ seq_printf(m,
+ "\n cpu: %i pcp: %i"
+ "\n count: %i"
+ "\n low: %i"
+ "\n high: %i"
+ "\n batch: %i",
+ i, j,
+ pageset->pcp[j].count,
+ pageset->pcp[j].low,
+ pageset->pcp[j].high,
+ pageset->pcp[j].batch);
+ }
+#ifdef CONFIG_NUMA
+ seq_printf(m,
+ "\n numa_hit: %lu"
+ "\n numa_miss: %lu"
+ "\n numa_foreign: %lu"
+ "\n interleave_hit: %lu"
+ "\n local_node: %lu"
+ "\n other_node: %lu",
+ pageset->numa_hit,
+ pageset->numa_miss,
+ pageset->numa_foreign,
+ pageset->interleave_hit,
+ pageset->local_node,
+ pageset->other_node);
+#endif
+ }
+ seq_printf(m,
+ "\n all_unreclaimable: %u"
+ "\n prev_priority: %i"
+ "\n temp_priority: %i"
+ "\n start_pfn: %lu",
+ zone->all_unreclaimable,
+ zone->prev_priority,
+ zone->temp_priority,
+ zone->zone_start_pfn);
+ spin_unlock_irqrestore(&zone->lock, flags);
+ seq_putc(m, '\n');
+ }
+ return 0;
+}
+
+struct seq_operations zoneinfo_op = {
+ .start = frag_start, /* iterate over all zones. The same as in
+ * fragmentation. */
+ .next = frag_next,
+ .stop = frag_stop,
+ .show = zoneinfo_show,
};
static char *vmstat_text[] = {
@@ -2060,10 +2393,10 @@
min_pages = 128;
zone->pages_min = min_pages;
} else {
- /* if it's a lowmem zone, reserve a number of pages
+ /* if it's a lowmem zone, reserve a number of pages
* proportionate to the zone's size.
*/
- zone->pages_min = (pages_min * zone->present_pages) /
+ zone->pages_min = (pages_min * zone->present_pages) /
lowmem_pages;
}
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/net/core/dev.c
--- a/linux-2.6-xen-sparse/net/core/dev.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/net/core/dev.c Tue Jan 31 19:55:22 2006
@@ -121,18 +121,6 @@
#include <linux/udp.h>
#endif
-/* This define, if set, will randomly drop a packet when congestion
- * is more than moderate. It helps fairness in the multi-interface
- * case when one of them is a hog, but it kills performance for the
- * single interface case so it is off now by default.
- */
-#undef RAND_LIE
-
-/* Setting this will sample the queue lengths and thus congestion
- * via a timer instead of as each packet is received.
- */
-#undef OFFLINE_SAMPLE
-
/*
* The list of packet types we will receive (as opposed to discard)
* and the routines to invoke.
@@ -165,11 +153,6 @@
static struct list_head ptype_base[16]; /* 16 way hashed list */
static struct list_head ptype_all; /* Taps */
-#ifdef OFFLINE_SAMPLE
-static void sample_queue(unsigned long dummy);
-static struct timer_list samp_timer = TIMER_INITIALIZER(sample_queue, 0, 0);
-#endif
-
/*
* The @dev_base list is protected by @dev_base_lock and the rtln
* semaphore.
@@ -221,7 +204,7 @@
* Device drivers call our routines to queue packets here. We empty the
* queue in the local softnet handler.
*/
-DEFINE_PER_CPU(struct softnet_data, softnet_data) = { 0, };
+DEFINE_PER_CPU(struct softnet_data, softnet_data) = { NULL };
#ifdef CONFIG_SYSFS
extern int netdev_sysfs_init(void);
@@ -289,10 +272,6 @@
}
spin_unlock_bh(&ptype_lock);
}
-
-extern void linkwatch_run_queue(void);
-
-
/**
* __dev_remove_pack - remove packet handler
@@ -601,6 +580,8 @@
return dev;
}
+EXPORT_SYMBOL(dev_getbyhwaddr);
+
struct net_device *dev_getfirstbyhwtype(unsigned short type)
{
struct net_device *dev;
@@ -924,8 +905,7 @@
smp_mb__after_clear_bit(); /* Commit netif_running(). */
while (test_bit(__LINK_STATE_RX_SCHED, &dev->state)) {
/* No hurry. */
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(1);
+ msleep(1);
}
/*
@@ -1033,13 +1013,22 @@
atomic_dec(&netstamp_needed);
}
-static inline void net_timestamp(struct timeval *stamp)
+void __net_timestamp(struct sk_buff *skb)
+{
+ struct timeval tv;
+
+ do_gettimeofday(&tv);
+ skb_set_timestamp(skb, &tv);
+}
+EXPORT_SYMBOL(__net_timestamp);
+
+static inline void net_timestamp(struct sk_buff *skb)
{
if (atomic_read(&netstamp_needed))
- do_gettimeofday(stamp);
+ __net_timestamp(skb);
else {
- stamp->tv_sec = 0;
- stamp->tv_usec = 0;
+ skb->tstamp.off_sec = 0;
+ skb->tstamp.off_usec = 0;
}
}
@@ -1051,7 +1040,8 @@
void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev)
{
struct packet_type *ptype;
- net_timestamp(&skb->stamp);
+
+ net_timestamp(skb);
rcu_read_lock();
list_for_each_entry_rcu(ptype, &ptype_all, list) {
@@ -1082,7 +1072,7 @@
skb2->h.raw = skb2->nh.raw;
skb2->pkt_type = PACKET_OUTGOING;
- ptype->func(skb2, skb->dev, ptype);
+ ptype->func(skb2, skb->dev, ptype, skb->dev);
}
}
rcu_read_unlock();
@@ -1147,10 +1137,8 @@
#define illegal_highdma(dev, skb) (0)
#endif
-extern void skb_release_data(struct sk_buff *);
-
/* Keep head the same: replace data */
-int __skb_linearize(struct sk_buff *skb, int gfp_mask)
+int __skb_linearize(struct sk_buff *skb, gfp_t gfp_mask)
{
unsigned int size;
u8 *data;
@@ -1308,6 +1296,8 @@
if (skb_checksum_help(skb, 0))
goto out_kfree_skb;
+ spin_lock_prefetch(&dev->queue_lock);
+
/* Disable soft irqs for various locks below. Also
* stops preemption for RCU.
*/
@@ -1400,69 +1390,11 @@
Receiver routines
=======================================================================*/
-int netdev_max_backlog = 300;
+int netdev_max_backlog = 1000;
+int netdev_budget = 300;
int weight_p = 64; /* old backlog weight */
-/* These numbers are selected based on intuition and some
- * experimentatiom, if you have more scientific way of doing this
- * please go ahead and fix things.
- */
-int no_cong_thresh = 10;
-int no_cong = 20;
-int lo_cong = 100;
-int mod_cong = 290;
DEFINE_PER_CPU(struct netif_rx_stats, netdev_rx_stat) = { 0, };
-
-
-static void get_sample_stats(int cpu)
-{
-#ifdef RAND_LIE
- unsigned long rd;
- int rq;
-#endif
- struct softnet_data *sd = &per_cpu(softnet_data, cpu);
- int blog = sd->input_pkt_queue.qlen;
- int avg_blog = sd->avg_blog;
-
- avg_blog = (avg_blog >> 1) + (blog >> 1);
-
- if (avg_blog > mod_cong) {
- /* Above moderate congestion levels. */
- sd->cng_level = NET_RX_CN_HIGH;
-#ifdef RAND_LIE
- rd = net_random();
- rq = rd % netdev_max_backlog;
- if (rq < avg_blog) /* unlucky bastard */
- sd->cng_level = NET_RX_DROP;
-#endif
- } else if (avg_blog > lo_cong) {
- sd->cng_level = NET_RX_CN_MOD;
-#ifdef RAND_LIE
- rd = net_random();
- rq = rd % netdev_max_backlog;
- if (rq < avg_blog) /* unlucky bastard */
- sd->cng_level = NET_RX_CN_HIGH;
-#endif
- } else if (avg_blog > no_cong)
- sd->cng_level = NET_RX_CN_LOW;
- else /* no congestion */
- sd->cng_level = NET_RX_SUCCESS;
-
- sd->avg_blog = avg_blog;
-}
-
-#ifdef OFFLINE_SAMPLE
-static void sample_queue(unsigned long dummy)
-{
-/* 10 ms 0r 1ms -- i don't care -- JHS */
- int next_tick = 1;
- int cpu = smp_processor_id();
-
- get_sample_stats(cpu);
- next_tick += jiffies;
- mod_timer(&samp_timer, next_tick);
-}
-#endif
/**
@@ -1485,7 +1417,6 @@
int netif_rx(struct sk_buff *skb)
{
- int this_cpu;
struct softnet_data *queue;
unsigned long flags;
@@ -1493,46 +1424,30 @@
if (netpoll_rx(skb))
return NET_RX_DROP;
- if (!skb->stamp.tv_sec)
- net_timestamp(&skb->stamp);
+ if (!skb->tstamp.off_sec)
+ net_timestamp(skb);
/*
* The code is rearranged so that the path is the most
* short when CPU is congested, but is still operating.
*/
local_irq_save(flags);
- this_cpu = smp_processor_id();
queue = &__get_cpu_var(softnet_data);
__get_cpu_var(netdev_rx_stat).total++;
if (queue->input_pkt_queue.qlen <= netdev_max_backlog) {
if (queue->input_pkt_queue.qlen) {
- if (queue->throttle)
- goto drop;
-
enqueue:
dev_hold(skb->dev);
__skb_queue_tail(&queue->input_pkt_queue, skb);
-#ifndef OFFLINE_SAMPLE
- get_sample_stats(this_cpu);
-#endif
local_irq_restore(flags);
- return queue->cng_level;
+ return NET_RX_SUCCESS;
}
-
- if (queue->throttle)
- queue->throttle = 0;
netif_rx_schedule(&queue->backlog_dev);
goto enqueue;
}
- if (!queue->throttle) {
- queue->throttle = 1;
- __get_cpu_var(netdev_rx_stat).throttled++;
- }
-
-drop:
__get_cpu_var(netdev_rx_stat).dropped++;
local_irq_restore(flags);
@@ -1555,14 +1470,14 @@
EXPORT_SYMBOL(netif_rx_ni);
-static __inline__ void skb_bond(struct sk_buff *skb)
+static inline struct net_device *skb_bond(struct sk_buff *skb)
{
struct net_device *dev = skb->dev;
- if (dev->master) {
- skb->real_dev = skb->dev;
+ if (dev->master)
skb->dev = dev->master;
- }
+
+ return dev;
}
static void net_tx_action(struct softirq_action *h)
@@ -1612,10 +1527,11 @@
}
static __inline__ int deliver_skb(struct sk_buff *skb,
- struct packet_type *pt_prev)
+ struct packet_type *pt_prev,
+ struct net_device *orig_dev)
{
atomic_inc(&skb->users);
- return pt_prev->func(skb, skb->dev, pt_prev);
+ return pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
}
#if defined(CONFIG_BRIDGE) || defined (CONFIG_BRIDGE_MODULE)
@@ -1626,7 +1542,8 @@
void (*br_fdb_put_hook)(struct net_bridge_fdb_entry *ent);
static __inline__ int handle_bridge(struct sk_buff **pskb,
- struct packet_type **pt_prev, int *ret)
+ struct packet_type **pt_prev, int *ret,
+ struct net_device *orig_dev)
{
struct net_bridge_port *port;
@@ -1635,14 +1552,14 @@
return 0;
if (*pt_prev) {
- *ret = deliver_skb(*pskb, *pt_prev);
+ *ret = deliver_skb(*pskb, *pt_prev, orig_dev);
*pt_prev = NULL;
}
return br_handle_frame_hook(port, pskb);
}
#else
-#define handle_bridge(skb, pt_prev, ret) (0)
+#define handle_bridge(skb, pt_prev, ret, orig_dev) (0)
#endif
#ifdef CONFIG_NET_CLS_ACT
@@ -1664,17 +1581,14 @@
__u32 ttl = (__u32) G_TC_RTTL(skb->tc_verd);
if (MAX_RED_LOOP < ttl++) {
printk("Redir loop detected Dropping packet (%s->%s)\n",
-
skb->input_dev?skb->input_dev->name:"??",skb->dev->name);
+ skb->input_dev->name, skb->dev->name);
return TC_ACT_SHOT;
}
skb->tc_verd = SET_TC_RTTL(skb->tc_verd,ttl);
skb->tc_verd = SET_TC_AT(skb->tc_verd,AT_INGRESS);
- if (NULL == skb->input_dev) {
- skb->input_dev = skb->dev;
- printk("ing_filter: fixed %s out
%s\n",skb->input_dev->name,skb->dev->name);
- }
+
spin_lock(&dev->ingress_lock);
if ((q = dev->qdisc_ingress) != NULL)
result = q->enqueue(skb, q);
@@ -1689,6 +1603,7 @@
int netif_receive_skb(struct sk_buff *skb)
{
struct packet_type *ptype, *pt_prev;
+ struct net_device *orig_dev;
int ret = NET_RX_DROP;
unsigned short type;
@@ -1696,10 +1611,13 @@
if (skb->dev->poll && netpoll_rx(skb))
return NET_RX_DROP;
- if (!skb->stamp.tv_sec)
- net_timestamp(&skb->stamp);
-
- skb_bond(skb);
+ if (!skb->tstamp.off_sec)
+ net_timestamp(skb);
+
+ if (!skb->input_dev)
+ skb->input_dev = skb->dev;
+
+ orig_dev = skb_bond(skb);
__get_cpu_var(netdev_rx_stat).total++;
@@ -1733,14 +1651,14 @@
list_for_each_entry_rcu(ptype, &ptype_all, list) {
if (!ptype->dev || ptype->dev == skb->dev) {
if (pt_prev)
- ret = deliver_skb(skb, pt_prev);
+ ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
}
#ifdef CONFIG_NET_CLS_ACT
if (pt_prev) {
- ret = deliver_skb(skb, pt_prev);
+ ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = NULL; /* noone else should process this after*/
} else {
skb->tc_verd = SET_TC_OK2MUNGE(skb->tc_verd);
@@ -1759,7 +1677,7 @@
handle_diverter(skb);
- if (handle_bridge(&skb, &pt_prev, &ret))
+ if (handle_bridge(&skb, &pt_prev, &ret, orig_dev))
goto out;
type = skb->protocol;
@@ -1767,13 +1685,13 @@
if (ptype->type == type &&
(!ptype->dev || ptype->dev == skb->dev)) {
if (pt_prev)
- ret = deliver_skb(skb, pt_prev);
+ ret = deliver_skb(skb, pt_prev, orig_dev);
pt_prev = ptype;
}
}
if (pt_prev) {
- ret = pt_prev->func(skb, skb->dev, pt_prev);
+ ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev);
} else {
kfree_skb(skb);
/* Jamal, now you will not able to escape explaining
@@ -1830,8 +1748,6 @@
smp_mb__before_clear_bit();
netif_poll_enable(backlog_dev);
- if (queue->throttle)
- queue->throttle = 0;
local_irq_enable();
return 0;
}
@@ -1840,9 +1756,9 @@
{
struct softnet_data *queue = &__get_cpu_var(softnet_data);
unsigned long start_time = jiffies;
- int budget = netdev_max_backlog;
-
-
+ int budget = netdev_budget;
+ void *have;
+
local_irq_disable();
while (!list_empty(&queue->poll_list)) {
@@ -1855,10 +1771,10 @@
dev = list_entry(queue->poll_list.next,
struct net_device, poll_list);
- netpoll_poll_lock(dev);
+ have = netpoll_poll_lock(dev);
if (dev->quota <= 0 || dev->poll(dev, &budget)) {
- netpoll_poll_unlock(dev);
+ netpoll_poll_unlock(have);
local_irq_disable();
list_del(&dev->poll_list);
list_add_tail(&dev->poll_list, &queue->poll_list);
@@ -1867,7 +1783,7 @@
else
dev->quota = dev->weight;
} else {
- netpoll_poll_unlock(dev);
+ netpoll_poll_unlock(have);
dev_put(dev);
local_irq_disable();
}
@@ -2105,15 +2021,9 @@
struct netif_rx_stats *s = v;
seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x\n",
- s->total, s->dropped, s->time_squeeze, s->throttled,
- s->fastroute_hit, s->fastroute_success, s->fastroute_defer,
- s->fastroute_deferred_out,
-#if 0
- s->fastroute_latency_reduction
-#else
- s->cpu_collision
-#endif
- );
+ s->total, s->dropped, s->time_squeeze, 0,
+ 0, 0, 0, 0, /* was fastroute */
+ s->cpu_collision );
return 0;
}
@@ -2240,10 +2150,11 @@
{
unsigned short old_flags = dev->flags;
- dev->flags |= IFF_PROMISC;
if ((dev->promiscuity += inc) == 0)
dev->flags &= ~IFF_PROMISC;
- if (dev->flags ^ old_flags) {
+ else
+ dev->flags |= IFF_PROMISC;
+ if (dev->flags != old_flags) {
dev_mc_upload(dev);
printk(KERN_INFO "device %s %s promiscuous mode\n",
dev->name, (dev->flags & IFF_PROMISC) ? "entered" :
@@ -3355,9 +3266,6 @@
queue = &per_cpu(softnet_data, i);
skb_queue_head_init(&queue->input_pkt_queue);
- queue->throttle = 0;
- queue->cng_level = 0;
- queue->avg_blog = 10; /* arbitrary non-zero */
queue->completion_queue = NULL;
INIT_LIST_HEAD(&queue->poll_list);
set_bit(__LINK_STATE_START, &queue->backlog_dev.state);
@@ -3365,11 +3273,6 @@
queue->backlog_dev.poll = process_backlog;
atomic_set(&queue->backlog_dev.refcnt, 1);
}
-
-#ifdef OFFLINE_SAMPLE
- samp_timer.expires = jiffies + (10 * HZ);
- add_timer(&samp_timer);
-#endif
dev_boot_phase = 0;
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/net/core/skbuff.c
--- a/linux-2.6-xen-sparse/net/core/skbuff.c Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/net/core/skbuff.c Tue Jan 31 19:55:22 2006
@@ -68,7 +68,8 @@
#include <asm/uaccess.h>
#include <asm/system.h>
-static kmem_cache_t *skbuff_head_cache;
+static kmem_cache_t *skbuff_head_cache __read_mostly;
+static kmem_cache_t *skbuff_fclone_cache __read_mostly;
/*
* Keep out-of-line to prevent kernel bloat.
@@ -118,7 +119,7 @@
*/
/**
- * alloc_skb - allocate a network buffer
+ * __alloc_skb - allocate a network buffer
* @size: size to allocate
* @gfp_mask: allocation mask
*
@@ -130,14 +131,20 @@
* %GFP_ATOMIC.
*/
#ifndef CONFIG_HAVE_ARCH_ALLOC_SKB
-struct sk_buff *alloc_skb(unsigned int size, int gfp_mask)
+struct sk_buff *__alloc_skb(unsigned int size, gfp_t gfp_mask,
+ int fclone)
{
struct sk_buff *skb;
u8 *data;
/* Get the HEAD */
- skb = kmem_cache_alloc(skbuff_head_cache,
- gfp_mask & ~__GFP_DMA);
+ if (fclone)
+ skb = kmem_cache_alloc(skbuff_fclone_cache,
+ gfp_mask & ~__GFP_DMA);
+ else
+ skb = kmem_cache_alloc(skbuff_head_cache,
+ gfp_mask & ~__GFP_DMA);
+
if (!skb)
goto out;
@@ -154,7 +161,15 @@
skb->data = data;
skb->tail = data;
skb->end = data + size;
-
+ if (fclone) {
+ struct sk_buff *child = skb + 1;
+ atomic_t *fclone_ref = (atomic_t *) (child + 1);
+
+ skb->fclone = SKB_FCLONE_ORIG;
+ atomic_set(fclone_ref, 1);
+
+ child->fclone = SKB_FCLONE_UNAVAILABLE;
+ }
atomic_set(&(skb_shinfo(skb)->dataref), 1);
skb_shinfo(skb)->nr_frags = 0;
skb_shinfo(skb)->tso_size = 0;
@@ -163,7 +178,10 @@
out:
return skb;
nodata:
- kmem_cache_free(skbuff_head_cache, skb);
+ if (fclone)
+ kmem_cache_free(skbuff_fclone_cache, skb);
+ else
+ kmem_cache_free(skbuff_head_cache, skb);
skb = NULL;
goto out;
}
@@ -184,14 +202,21 @@
* %GFP_ATOMIC.
*/
struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp,
- unsigned int size, int gfp_mask)
+ unsigned int size,
+ gfp_t gfp_mask,
+ int fclone)
{
struct sk_buff *skb;
u8 *data;
/* Get the HEAD */
- skb = kmem_cache_alloc(skbuff_head_cache,
- gfp_mask & ~__GFP_DMA);
+ if (fclone)
+ skb = kmem_cache_alloc(skbuff_fclone_cache,
+ gfp_mask & ~__GFP_DMA);
+ else
+ skb = kmem_cache_alloc(skbuff_head_cache,
+ gfp_mask & ~__GFP_DMA);
+
if (!skb)
goto out;
@@ -208,7 +233,15 @@
skb->data = data;
skb->tail = data;
skb->end = data + size;
-
+ if (fclone) {
+ struct sk_buff *child = skb + 1;
+ atomic_t *fclone_ref = (atomic_t *) (child + 1);
+
+ skb->fclone = SKB_FCLONE_ORIG;
+ atomic_set(fclone_ref, 1);
+
+ child->fclone = SKB_FCLONE_UNAVAILABLE;
+ }
atomic_set(&(skb_shinfo(skb)->dataref), 1);
skb_shinfo(skb)->nr_frags = 0;
skb_shinfo(skb)->tso_size = 0;
@@ -217,7 +250,10 @@
out:
return skb;
nodata:
- kmem_cache_free(skbuff_head_cache, skb);
+ if (fclone)
+ kmem_cache_free(skbuff_fclone_cache, skb);
+ else
+ kmem_cache_free(skbuff_head_cache, skb);
skb = NULL;
goto out;
}
@@ -267,8 +303,34 @@
*/
void kfree_skbmem(struct sk_buff *skb)
{
+ struct sk_buff *other;
+ atomic_t *fclone_ref;
+
skb_release_data(skb);
- kmem_cache_free(skbuff_head_cache, skb);
+ switch (skb->fclone) {
+ case SKB_FCLONE_UNAVAILABLE:
+ kmem_cache_free(skbuff_head_cache, skb);
+ break;
+
+ case SKB_FCLONE_ORIG:
+ fclone_ref = (atomic_t *) (skb + 2);
+ if (atomic_dec_and_test(fclone_ref))
+ kmem_cache_free(skbuff_fclone_cache, skb);
+ break;
+
+ case SKB_FCLONE_CLONE:
+ fclone_ref = (atomic_t *) (skb + 1);
+ other = skb - 1;
+
+ /* The clone portion is available for
+ * fast-cloning again.
+ */
+ skb->fclone = SKB_FCLONE_UNAVAILABLE;
+
+ if (atomic_dec_and_test(fclone_ref))
+ kmem_cache_free(skbuff_fclone_cache, other);
+ break;
+ };
}
/**
@@ -282,8 +344,6 @@
void __kfree_skb(struct sk_buff *skb)
{
- BUG_ON(skb->list != NULL);
-
dst_release(skb->dst);
#ifdef CONFIG_XFRM
secpath_put(skb->sp);
@@ -303,7 +363,6 @@
skb->tc_index = 0;
#ifdef CONFIG_NET_CLS_ACT
skb->tc_verd = 0;
- skb->tc_classid = 0;
#endif
#endif
@@ -324,21 +383,29 @@
* %GFP_ATOMIC.
*/
-struct sk_buff *skb_clone(struct sk_buff *skb, int gfp_mask)
-{
- struct sk_buff *n = kmem_cache_alloc(skbuff_head_cache, gfp_mask);
-
- if (!n)
- return NULL;
+struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask)
+{
+ struct sk_buff *n;
+
+ n = skb + 1;
+ if (skb->fclone == SKB_FCLONE_ORIG &&
+ n->fclone == SKB_FCLONE_UNAVAILABLE) {
+ atomic_t *fclone_ref = (atomic_t *) (n + 1);
+ n->fclone = SKB_FCLONE_CLONE;
+ atomic_inc(fclone_ref);
+ } else {
+ n = kmem_cache_alloc(skbuff_head_cache, gfp_mask);
+ if (!n)
+ return NULL;
+ n->fclone = SKB_FCLONE_UNAVAILABLE;
+ }
#define C(x) n->x = skb->x
n->next = n->prev = NULL;
- n->list = NULL;
n->sk = NULL;
- C(stamp);
+ C(tstamp);
C(dev);
- C(real_dev);
C(h);
C(nh);
C(mac);
@@ -363,33 +430,27 @@
C(ip_summed);
C(priority);
C(protocol);
- C(security);
n->destructor = NULL;
#ifdef CONFIG_NETFILTER
C(nfmark);
- C(nfcache);
C(nfct);
nf_conntrack_get(skb->nfct);
C(nfctinfo);
-#ifdef CONFIG_NETFILTER_DEBUG
- C(nf_debug);
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ C(ipvs_property);
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
C(nf_bridge);
nf_bridge_get(skb->nf_bridge);
#endif
#endif /*CONFIG_NETFILTER*/
-#if defined(CONFIG_HIPPI)
- C(private);
-#endif
#ifdef CONFIG_NET_SCHED
C(tc_index);
#ifdef CONFIG_NET_CLS_ACT
n->tc_verd = SET_TC_VERD(skb->tc_verd,0);
- n->tc_verd = CLR_TC_OK2MUNGE(skb->tc_verd);
- n->tc_verd = CLR_TC_MUNGED(skb->tc_verd);
+ n->tc_verd = CLR_TC_OK2MUNGE(n->tc_verd);
+ n->tc_verd = CLR_TC_MUNGED(n->tc_verd);
C(input_dev);
- C(tc_classid);
#endif
#endif
@@ -413,10 +474,8 @@
*/
unsigned long offset = new->data - old->data;
- new->list = NULL;
new->sk = NULL;
new->dev = old->dev;
- new->real_dev = old->real_dev;
new->priority = old->priority;
new->protocol = old->protocol;
new->dst = dst_clone(old->dst);
@@ -428,18 +487,17 @@
new->mac.raw = old->mac.raw + offset;
memcpy(new->cb, old->cb, sizeof(old->cb));
new->local_df = old->local_df;
+ new->fclone = SKB_FCLONE_UNAVAILABLE;
new->pkt_type = old->pkt_type;
- new->stamp = old->stamp;
+ new->tstamp = old->tstamp;
new->destructor = NULL;
- new->security = old->security;
#ifdef CONFIG_NETFILTER
new->nfmark = old->nfmark;
- new->nfcache = old->nfcache;
new->nfct = old->nfct;
nf_conntrack_get(old->nfct);
new->nfctinfo = old->nfctinfo;
-#ifdef CONFIG_NETFILTER_DEBUG
- new->nf_debug = old->nf_debug;
+#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ new->ipvs_property = old->ipvs_property;
#endif
#ifdef CONFIG_BRIDGE_NETFILTER
new->nf_bridge = old->nf_bridge;
@@ -474,7 +532,7 @@
* header is going to be modified. Use pskb_copy() instead.
*/
-struct sk_buff *skb_copy(const struct sk_buff *skb, int gfp_mask)
+struct sk_buff *skb_copy(const struct sk_buff *skb, gfp_t gfp_mask)
{
int headerlen = skb->data - skb->head;
/*
@@ -513,7 +571,7 @@
* The returned buffer has a reference count of 1.
*/
-struct sk_buff *pskb_copy(struct sk_buff *skb, int gfp_mask)
+struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask)
{
/*
* Allocate the copy buffer
@@ -571,7 +629,8 @@
* reloaded after call to this function.
*/
-int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, int gfp_mask)
+int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail,
+ gfp_t gfp_mask)
{
int i;
u8 *data;
@@ -661,7 +720,8 @@
* only by netfilter in the cases when checksum is recalculated? --ANK
*/
struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
- int newheadroom, int newtailroom, int gfp_mask)
+ int newheadroom, int newtailroom,
+ gfp_t gfp_mask)
{
/*
* Allocate the copy buffer
@@ -1355,50 +1415,43 @@
__skb_queue_tail(list, newsk);
spin_unlock_irqrestore(&list->lock, flags);
}
+
/**
* skb_unlink - remove a buffer from a list
* @skb: buffer to remove
- *
- * Place a packet after a given packet in a list. The list locks are taken
- * and this function is atomic with respect to other list locked calls
- *
- * Works even without knowing the list it is sitting on, which can be
- * handy at times. It also means that THE LIST MUST EXIST when you
- * unlink. Thus a list must have its contents unlinked before it is
- * destroyed.
- */
-void skb_unlink(struct sk_buff *skb)
-{
- struct sk_buff_head *list = skb->list;
-
- if (list) {
- unsigned long flags;
-
- spin_lock_irqsave(&list->lock, flags);
- if (skb->list == list)
- __skb_unlink(skb, skb->list);
- spin_unlock_irqrestore(&list->lock, flags);
- }
-}
-
+ * @list: list to use
+ *
+ * Remove a packet from a list. The list locks are taken and this
+ * function is atomic with respect to other list locked calls
+ *
+ * You must know what list the SKB is on.
+ */
+void skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&list->lock, flags);
+ __skb_unlink(skb, list);
+ spin_unlock_irqrestore(&list->lock, flags);
+}
/**
* skb_append - append a buffer
* @old: buffer to insert after
* @newsk: buffer to insert
+ * @list: list to use
*
* Place a packet after a given packet in a list. The list locks are taken
* and this function is atomic with respect to other list locked calls.
* A buffer cannot be placed on two lists at the same time.
*/
-
-void skb_append(struct sk_buff *old, struct sk_buff *newsk)
+void skb_append(struct sk_buff *old, struct sk_buff *newsk, struct
sk_buff_head *list)
{
unsigned long flags;
- spin_lock_irqsave(&old->list->lock, flags);
- __skb_append(old, newsk);
- spin_unlock_irqrestore(&old->list->lock, flags);
+ spin_lock_irqsave(&list->lock, flags);
+ __skb_append(old, newsk, list);
+ spin_unlock_irqrestore(&list->lock, flags);
}
@@ -1406,19 +1459,21 @@
* skb_insert - insert a buffer
* @old: buffer to insert before
* @newsk: buffer to insert
- *
- * Place a packet before a given packet in a list. The list locks are taken
- * and this function is atomic with respect to other list locked calls
+ * @list: list to use
+ *
+ * Place a packet before a given packet in a list. The list locks are
+ * taken and this function is atomic with respect to other list locked
+ * calls.
+ *
* A buffer cannot be placed on two lists at the same time.
*/
-
-void skb_insert(struct sk_buff *old, struct sk_buff *newsk)
+void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct
sk_buff_head *list)
{
unsigned long flags;
- spin_lock_irqsave(&old->list->lock, flags);
- __skb_insert(newsk, old->prev, old, old->list);
- spin_unlock_irqrestore(&old->list->lock, flags);
+ spin_lock_irqsave(&list->lock, flags);
+ __skb_insert(newsk, old->prev, old, list);
+ spin_unlock_irqrestore(&list->lock, flags);
}
#if 0
@@ -1512,6 +1567,159 @@
skb_split_no_header(skb, skb1, len, pos);
}
+/**
+ * skb_prepare_seq_read - Prepare a sequential read of skb data
+ * @skb: the buffer to read
+ * @from: lower offset of data to be read
+ * @to: upper offset of data to be read
+ * @st: state variable
+ *
+ * Initializes the specified state variable. Must be called before
+ * invoking skb_seq_read() for the first time.
+ */
+void skb_prepare_seq_read(struct sk_buff *skb, unsigned int from,
+ unsigned int to, struct skb_seq_state *st)
+{
+ st->lower_offset = from;
+ st->upper_offset = to;
+ st->root_skb = st->cur_skb = skb;
+ st->frag_idx = st->stepped_offset = 0;
+ st->frag_data = NULL;
+}
+
+/**
+ * skb_seq_read - Sequentially read skb data
+ * @consumed: number of bytes consumed by the caller so far
+ * @data: destination pointer for data to be returned
+ * @st: state variable
+ *
+ * Reads a block of skb data at &consumed relative to the
+ * lower offset specified to skb_prepare_seq_read(). Assigns
+ * the head of the data block to &data and returns the length
+ * of the block or 0 if the end of the skb data or the upper
+ * offset has been reached.
+ *
+ * The caller is not required to consume all of the data
+ * returned, i.e. &consumed is typically set to the number
+ * of bytes already consumed and the next call to
+ * skb_seq_read() will return the remaining part of the block.
+ *
+ * Note: The size of each block of data returned can be arbitary,
+ * this limitation is the cost for zerocopy seqeuental
+ * reads of potentially non linear data.
+ *
+ * Note: Fragment lists within fragments are not implemented
+ * at the moment, state->root_skb could be replaced with
+ * a stack for this purpose.
+ */
+unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
+ struct skb_seq_state *st)
+{
+ unsigned int block_limit, abs_offset = consumed + st->lower_offset;
+ skb_frag_t *frag;
+
+ if (unlikely(abs_offset >= st->upper_offset))
+ return 0;
+
+next_skb:
+ block_limit = skb_headlen(st->cur_skb);
+
+ if (abs_offset < block_limit) {
+ *data = st->cur_skb->data + abs_offset;
+ return block_limit - abs_offset;
+ }
+
+ if (st->frag_idx == 0 && !st->frag_data)
+ st->stepped_offset += skb_headlen(st->cur_skb);
+
+ while (st->frag_idx < skb_shinfo(st->cur_skb)->nr_frags) {
+ frag = &skb_shinfo(st->cur_skb)->frags[st->frag_idx];
+ block_limit = frag->size + st->stepped_offset;
+
+ if (abs_offset < block_limit) {
+ if (!st->frag_data)
+ st->frag_data = kmap_skb_frag(frag);
+
+ *data = (u8 *) st->frag_data + frag->page_offset +
+ (abs_offset - st->stepped_offset);
+
+ return block_limit - abs_offset;
+ }
+
+ if (st->frag_data) {
+ kunmap_skb_frag(st->frag_data);
+ st->frag_data = NULL;
+ }
+
+ st->frag_idx++;
+ st->stepped_offset += frag->size;
+ }
+
+ if (st->cur_skb->next) {
+ st->cur_skb = st->cur_skb->next;
+ st->frag_idx = 0;
+ goto next_skb;
+ } else if (st->root_skb == st->cur_skb &&
+ skb_shinfo(st->root_skb)->frag_list) {
+ st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+ goto next_skb;
+ }
+
+ return 0;
+}
+
+/**
+ * skb_abort_seq_read - Abort a sequential read of skb data
+ * @st: state variable
+ *
+ * Must be called if skb_seq_read() was not called until it
+ * returned 0.
+ */
+void skb_abort_seq_read(struct skb_seq_state *st)
+{
+ if (st->frag_data)
+ kunmap_skb_frag(st->frag_data);
+}
+
+#define TS_SKB_CB(state) ((struct skb_seq_state *) &((state)->cb))
+
+static unsigned int skb_ts_get_next_block(unsigned int offset, const u8 **text,
+ struct ts_config *conf,
+ struct ts_state *state)
+{
+ return skb_seq_read(offset, text, TS_SKB_CB(state));
+}
+
+static void skb_ts_finish(struct ts_config *conf, struct ts_state *state)
+{
+ skb_abort_seq_read(TS_SKB_CB(state));
+}
+
+/**
+ * skb_find_text - Find a text pattern in skb data
+ * @skb: the buffer to look in
+ * @from: search offset
+ * @to: search limit
+ * @config: textsearch configuration
+ * @state: uninitialized textsearch state variable
+ *
+ * Finds a pattern in the skb data according to the specified
+ * textsearch configuration. Use textsearch_next() to retrieve
+ * subsequent occurrences of the pattern. Returns the offset
+ * to the first occurrence or UINT_MAX if no match was found.
+ */
+unsigned int skb_find_text(struct sk_buff *skb, unsigned int from,
+ unsigned int to, struct ts_config *config,
+ struct ts_state *state)
+{
+ config->get_next_block = skb_ts_get_next_block;
+ config->finish = skb_ts_finish;
+
+ skb_prepare_seq_read(skb, from, to, TS_SKB_CB(state));
+
+ return textsearch_find(config, state);
+}
+
void __init skb_init(void)
{
skbuff_head_cache = kmem_cache_create("skbuff_head_cache",
@@ -1521,12 +1729,21 @@
NULL, NULL);
if (!skbuff_head_cache)
panic("cannot create skbuff cache");
+
+ skbuff_fclone_cache = kmem_cache_create("skbuff_fclone_cache",
+ (2*sizeof(struct sk_buff)) +
+ sizeof(atomic_t),
+ 0,
+ SLAB_HWCACHE_ALIGN,
+ NULL, NULL);
+ if (!skbuff_fclone_cache)
+ panic("cannot create skbuff cache");
}
EXPORT_SYMBOL(___pskb_trim);
EXPORT_SYMBOL(__kfree_skb);
EXPORT_SYMBOL(__pskb_pull_tail);
-EXPORT_SYMBOL(alloc_skb);
+EXPORT_SYMBOL(__alloc_skb);
EXPORT_SYMBOL(pskb_copy);
EXPORT_SYMBOL(pskb_expand_head);
EXPORT_SYMBOL(skb_checksum);
@@ -1550,3 +1767,7 @@
EXPORT_SYMBOL(skb_unlink);
EXPORT_SYMBOL(skb_append);
EXPORT_SYMBOL(skb_split);
+EXPORT_SYMBOL(skb_prepare_seq_read);
+EXPORT_SYMBOL(skb_seq_read);
+EXPORT_SYMBOL(skb_abort_seq_read);
+EXPORT_SYMBOL(skb_find_text);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mach-xen/setup.c
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/i386/mach-xen/setup.c Tue Jan 31 19:55:22 2006
@@ -0,0 +1,37 @@
+/*
+ * Machine specific setup for generic
+ */
+
+#include <linux/config.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/acpi.h>
+#include <asm/arch_hooks.h>
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define DEFAULT_SEND_IPI (1)
+#else
+#define DEFAULT_SEND_IPI (0)
+#endif
+
+int no_broadcast=DEFAULT_SEND_IPI;
+
+static __init int no_ipi_broadcast(char *str)
+{
+ get_option(&str, &no_broadcast);
+ printk ("Using %s mode\n", no_broadcast ? "No IPI Broadcast" :
+
"IPI Broadcast");
+ return 1;
+}
+
+__setup("no_ipi_broadcast", no_ipi_broadcast);
+
+static int __init print_ipi_mode(void)
+{
+ printk ("Using IPI %s mode\n", no_broadcast ? "No-Shortcut" :
+
"Shortcut");
+ return 0;
+}
+
+late_initcall(print_ipi_mode);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/syscall32_syscall-xen.S
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/syscall32_syscall-xen.S Tue Jan
31 19:55:22 2006
@@ -0,0 +1,28 @@
+/* 32bit VDSOs mapped into user space. */
+
+ .section ".init.data","aw"
+
+#ifdef USE_INT80
+
+ .globl syscall32_int80
+ .globl syscall32_int80_end
+
+syscall32_int80:
+ .incbin "arch/x86_64/ia32/vsyscall-int80.so"
+syscall32_int80_end:
+
+#endif
+
+ .globl syscall32_syscall
+ .globl syscall32_syscall_end
+
+syscall32_syscall:
+ .incbin "arch/x86_64/ia32/vsyscall-syscall.so"
+syscall32_syscall_end:
+
+ .globl syscall32_sysenter
+ .globl syscall32_sysenter_end
+
+syscall32_sysenter:
+ .incbin "arch/x86_64/ia32/vsyscall-sysenter.so"
+syscall32_sysenter_end:
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-sigreturn.S
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-sigreturn.S Tue Jan
31 19:55:22 2006
@@ -0,0 +1,123 @@
+/*
+ * Common code for the sigreturn entry points on the vsyscall page.
+ * This code uses SYSCALL_ENTER_KERNEL (either syscall or int $0x80)
+ * to enter the kernel.
+ * This file is #include'd by vsyscall-*.S to define them after the
+ * vsyscall entry point. The addresses we get for these entry points
+ * by doing ".balign 32" must match in both versions of the page.
+ */
+
+ .section .text.sigreturn,"ax"
+ .balign 32
+ .globl __kernel_sigreturn
+ .type __kernel_sigreturn,@function
+__kernel_sigreturn:
+.LSTART_sigreturn:
+ popl %eax
+ movl $__NR_ia32_sigreturn, %eax
+ SYSCALL_ENTER_KERNEL
+.LEND_sigreturn:
+ .size __kernel_sigreturn,.-.LSTART_sigreturn
+
+ .section .text.rtsigreturn,"ax"
+ .balign 32
+ .globl __kernel_rt_sigreturn
+ .type __kernel_rt_sigreturn,@function
+__kernel_rt_sigreturn:
+.LSTART_rt_sigreturn:
+ movl $__NR_ia32_rt_sigreturn, %eax
+ SYSCALL_ENTER_KERNEL
+.LEND_rt_sigreturn:
+ .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn
+
+ .section .eh_frame,"a",@progbits
+ .long .LENDFDE2-.LSTARTFDE2 /* Length FDE */
+.LSTARTFDE2:
+ .long .LSTARTFDE2-.LSTARTFRAME /* CIE pointer */
+ /* HACK: The dwarf2 unwind routines will subtract 1 from the
+ return address to get an address in the middle of the
+ presumed call instruction. Since we didn't get here via
+ a call, we need to include the nop before the real start
+ to make up for it. */
+ .long .LSTART_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_sigreturn-.LSTART_sigreturn+1
+ .uleb128 0 /* Augmentation length */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ complicated by the fact that the "CFA" is always assumed to
+ be the value of the stack pointer in the caller. This means
+ that we must define the CFA of this body of code to be the
+ saved value of the stack pointer in the sigcontext. Which
+ also means that there is no fixed relation to the other
+ saved registers, which means that we must use DW_CFA_expression
+ to compute their addresses. It also means that when we
+ adjust the stack with the popl, we have to do it all over again. */
+
+#define do_cfa_expr(offset) \
+ .byte 0x0f; /* DW_CFA_def_cfa_expression */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+ .byte 0x06; /* DW_OP_deref */ \
+1:
+
+#define do_expr(regno, offset) \
+ .byte 0x10; /* DW_CFA_expression */ \
+ .uleb128 regno; /* regno */ \
+ .uleb128 1f-0f; /* length */ \
+0: .byte 0x74; /* DW_OP_breg4 */ \
+ .sleb128 offset; /* offset */ \
+1:
+
+ do_cfa_expr(IA32_SIGCONTEXT_esp+4)
+ do_expr(0, IA32_SIGCONTEXT_eax+4)
+ do_expr(1, IA32_SIGCONTEXT_ecx+4)
+ do_expr(2, IA32_SIGCONTEXT_edx+4)
+ do_expr(3, IA32_SIGCONTEXT_ebx+4)
+ do_expr(5, IA32_SIGCONTEXT_ebp+4)
+ do_expr(6, IA32_SIGCONTEXT_esi+4)
+ do_expr(7, IA32_SIGCONTEXT_edi+4)
+ do_expr(8, IA32_SIGCONTEXT_eip+4)
+
+ .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */
+
+ do_cfa_expr(IA32_SIGCONTEXT_esp)
+ do_expr(0, IA32_SIGCONTEXT_eax)
+ do_expr(1, IA32_SIGCONTEXT_ecx)
+ do_expr(2, IA32_SIGCONTEXT_edx)
+ do_expr(3, IA32_SIGCONTEXT_ebx)
+ do_expr(5, IA32_SIGCONTEXT_ebp)
+ do_expr(6, IA32_SIGCONTEXT_esi)
+ do_expr(7, IA32_SIGCONTEXT_edi)
+ do_expr(8, IA32_SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDE2:
+
+ .long .LENDFDE3-.LSTARTFDE3 /* Length FDE */
+.LSTARTFDE3:
+ .long .LSTARTFDE3-.LSTARTFRAME /* CIE pointer */
+ /* HACK: See above wrt unwind library assumptions. */
+ .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */
+ .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1
+ .uleb128 0 /* Augmentation */
+ /* What follows are the instructions for the table generation.
+ We record the locations of each register saved. This is
+ slightly less complicated than the above, since we don't
+ modify the stack pointer in the process. */
+
+ do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esp)
+ do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eax)
+ do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ecx)
+ do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edx)
+ do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebx)
+ do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ebp)
+ do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_esi)
+ do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_edi)
+ do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_eip)
+
+ .align 4
+.LENDFDE3:
+
+#include <vsyscall-note.S>
+
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/drivers/acpi/Kconfig
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/drivers/acpi/Kconfig Tue Jan 31 19:55:22 2006
@@ -0,0 +1,344 @@
+#
+# ACPI Configuration
+#
+
+menu "ACPI (Advanced Configuration and Power Interface) Support"
+ depends on !X86_VISWS
+ depends on !IA64_HP_SIM
+ depends on IA64 || X86
+
+config ACPI
+ bool "ACPI Support"
+ depends on IA64 || X86
+ select PM
+ select PCI
+
+ default y
+ ---help---
+ Advanced Configuration and Power Interface (ACPI) support for
+ Linux requires an ACPI compliant platform (hardware/firmware),
+ and assumes the presence of OS-directed configuration and power
+ management (OSPM) software. This option will enlarge your
+ kernel by about 70K.
+
+ Linux ACPI provides a robust functional replacement for several
+ legacy configuration and power management interfaces, including
+ the Plug-and-Play BIOS specification (PnP BIOS), the
+ MultiProcessor Specification (MPS), and the Advanced Power
+ Management (APM) specification. If both ACPI and APM support
+ are configured, whichever is loaded first shall be used.
+
+ The ACPI SourceForge project contains the latest source code,
+ documentation, tools, mailing list subscription, and other
+ information. This project is available at:
+ <http://sourceforge.net/projects/acpi>
+
+ Linux support for ACPI is based on Intel Corporation's ACPI
+ Component Architecture (ACPI CA). For more information see:
+ <http://developer.intel.com/technology/iapc/acpi>
+
+ ACPI is an open industry specification co-developed by Compaq,
+ Intel, Microsoft, Phoenix, and Toshiba. The specification is
+ available at:
+ <http://www.acpi.info>
+
+if ACPI
+
+config ACPI_SLEEP
+ bool "Sleep States"
+ depends on X86 && (!SMP || SUSPEND_SMP) && !XEN
+ depends on PM
+ default y
+ ---help---
+ This option adds support for ACPI suspend states.
+
+ With this option, you will be able to put the system "to sleep".
+ Sleep states are low power states for the system and devices. All
+ of the system operating state is saved to either memory or disk
+ (depending on the state), to allow the system to resume operation
+ quickly at your request.
+
+ Although this option sounds really nifty, barely any of the device
+ drivers have been converted to the new driver model and hence few
+ have proper power management support.
+
+ This option is not recommended for anyone except those doing driver
+ power management development.
+
+config ACPI_SLEEP_PROC_FS
+ bool
+ depends on ACPI_SLEEP && PROC_FS
+ default y
+
+config ACPI_SLEEP_PROC_SLEEP
+ bool "/proc/acpi/sleep (deprecated)"
+ depends on ACPI_SLEEP_PROC_FS
+ default n
+ ---help---
+ Create /proc/acpi/sleep
+ Deprecated by /sys/power/state
+
+config ACPI_AC
+ tristate "AC Adapter"
+ depends on X86
+ default y
+ help
+ This driver adds support for the AC Adapter object, which indicates
+ whether a system is on AC, or not. If you have a system that can
+ switch between A/C and battery, say Y.
+
+config ACPI_BATTERY
+ tristate "Battery"
+ depends on X86
+ default y
+ help
+ This driver adds support for battery information through
+ /proc/acpi/battery. If you have a mobile system with a battery,
+ say Y.
+
+config ACPI_BUTTON
+ tristate "Button"
+ default y
+ help
+ This driver handles events on the power, sleep and lid buttons.
+ A daemon reads /proc/acpi/event and perform user-defined actions
+ such as shutting down the system. This is necessary for
+ software controlled poweroff.
+
+config ACPI_VIDEO
+ tristate "Video"
+ depends on X86
+ default y
+ help
+ This driver implement the ACPI Extensions For Display Adapters
+ for integrated graphics devices on motherboard, as specified in
+ ACPI 2.0 Specification, Appendix B, allowing to perform some basic
+ control like defining the video POST device, retrieving EDID
information
+ or to setup a video output, etc.
+ Note that this is an ref. implementation only. It may or may not work
+ for your integrated video device.
+
+config ACPI_HOTKEY
+ tristate "Generic Hotkey (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on X86
+ default n
+ help
+ Experimental consolidated hotkey driver.
+ If you are unsure, say N.
+
+config ACPI_FAN
+ tristate "Fan"
+ default y
+ help
+ This driver adds support for ACPI fan devices, allowing user-mode
+ applications to perform basic fan control (on, off, status).
+
+config ACPI_PROCESSOR
+ tristate "Processor"
+ default y
+ help
+ This driver installs ACPI as the idle handler for Linux, and uses
+ ACPI C2 and C3 processor states to save power, on systems that
+ support it. It is required by several flavors of cpufreq
+ Performance-state drivers.
+
+config ACPI_HOTPLUG_CPU
+ bool
+ depends on ACPI_PROCESSOR && HOTPLUG_CPU
+ select ACPI_CONTAINER
+ default y
+
+config ACPI_THERMAL
+ tristate "Thermal Zone"
+ depends on ACPI_PROCESSOR
+ default y
+ help
+ This driver adds support for ACPI thermal zones. Most mobile and
+ some desktop systems support ACPI thermal zones. It is HIGHLY
+ recommended that this option be enabled, as your processor(s)
+ may be damaged without it.
+
+config ACPI_NUMA
+ bool "NUMA support"
+ depends on NUMA
+ depends on (IA64 || X86_64)
+ default y if IA64_GENERIC || IA64_SGI_SN2
+
+config ACPI_ASUS
+ tristate "ASUS/Medion Laptop Extras"
+ depends on X86
+ default y
+ ---help---
+ This driver provides support for extra features of ACPI-compatible
+ ASUS laptops. As some of Medion laptops are made by ASUS, it may also
+ support some Medion laptops (such as 9675 for example). It makes all
+ the extra buttons generate standard ACPI events that go through
+ /proc/acpi/events, and (on some models) adds support for changing the
+ display brightness and output, switching the LCD backlight on and
off,
+ and most importantly, allows you to blink those fancy LEDs intended
+ for reporting mail and wireless status.
+
+ Note: display switching code is currently considered EXPERIMENTAL,
+ toying with these values may even lock your machine.
+
+ All settings are changed via /proc/acpi/asus directory entries. Owner
+ and group for these entries can be set with asus_uid and asus_gid
+ parameters.
+
+ More information and a userspace daemon for handling the extra
buttons
+ at <http://sourceforge.net/projects/acpi4asus/>.
+
+ If you have an ACPI-compatible ASUS laptop, say Y or M here. This
+ driver is still under development, so if your laptop is unsupported
or
+ something works not quite as expected, please use the mailing list
+ available on the above page (acpi4asus-user@xxxxxxxxxxxxxxxxxxxxx)
+
+config ACPI_IBM
+ tristate "IBM ThinkPad Laptop Extras"
+ depends on X86
+ default y
+ ---help---
+ This is a Linux ACPI driver for the IBM ThinkPad laptops. It adds
+ support for Fn-Fx key combinations, Bluetooth control, video
+ output switching, ThinkLight control, UltraBay eject and more.
+ For more information about this driver see
<file:Documentation/ibm-acpi.txt>
+ and <http://ibm-acpi.sf.net/> .
+
+ If you have an IBM ThinkPad laptop, say Y or M here.
+
+config ACPI_TOSHIBA
+ tristate "Toshiba Laptop Extras"
+ depends on X86
+ default y
+ ---help---
+ This driver adds support for access to certain system settings
+ on "legacy free" Toshiba laptops. These laptops can be recognized by
+ their lack of a BIOS setup menu and APM support.
+
+ On these machines, all system configuration is handled through the
+ ACPI. This driver is required for access to controls not covered
+ by the general ACPI drivers, such as LCD brightness, video output,
+ etc.
+
+ This driver differs from the non-ACPI Toshiba laptop driver (located
+ under "Processor type and features") in several aspects.
+ Configuration is accessed by reading and writing text files in the
+ /proc tree instead of by program interface to /dev. Furthermore, no
+ power management functions are exposed, as those are handled by the
+ general ACPI drivers.
+
+ More information about this driver is available at
+ <http://memebeam.org/toys/ToshibaAcpiDriver>.
+
+ If you have a legacy free Toshiba laptop (such as the Libretto L1
+ series), say Y.
+
+config ACPI_CUSTOM_DSDT
+ bool "Include Custom DSDT"
+ depends on !STANDALONE
+ default n
+ help
+ Thist option is to load a custom ACPI DSDT
+ If you don't know what that is, say N.
+
+config ACPI_CUSTOM_DSDT_FILE
+ string "Custom DSDT Table file to include"
+ depends on ACPI_CUSTOM_DSDT
+ default ""
+ help
+ Enter the full path name to the file wich includes the AmlCode
declaration.
+
+config ACPI_BLACKLIST_YEAR
+ int "Disable ACPI for systems before Jan 1st this year" if X86
+ default 0
+ help
+ enter a 4-digit year, eg. 2001 to disable ACPI by default
+ on platforms with DMI BIOS date before January 1st that year.
+ "acpi=force" can be used to override this mechanism.
+
+ Enter 0 to disable this mechanism and allow ACPI to
+ run by default no matter what the year. (default)
+
+config ACPI_DEBUG
+ bool "Debug Statements"
+ default n
+ help
+ The ACPI driver can optionally report errors with a great deal
+ of verbosity. Saying Y enables these statements. This will increase
+ your kernel size by around 50K.
+
+config ACPI_EC
+ bool
+ depends on X86
+ default y
+ help
+ This driver is required on some systems for the proper operation of
+ the battery and thermal drivers. If you are compiling for a
+ mobile system, say Y.
+
+config ACPI_POWER
+ bool
+ default y
+
+config ACPI_SYSTEM
+ bool
+ default y
+ help
+ This driver will enable your system to shut down using ACPI, and
+ dump your ACPI DSDT table using /proc/acpi/dsdt.
+
+config X86_PM_TIMER
+ bool "Power Management Timer Support"
+ depends on X86
+ depends on !X86_64
+ default y
+ help
+ The Power Management Timer is available on all ACPI-capable,
+ in most cases even if ACPI is unusable or blacklisted.
+
+ This timing source is not affected by powermanagement features
+ like aggressive processor idling, throttling, frequency and/or
+ voltage scaling, unlike the commonly used Time Stamp Counter
+ (TSC) timing source.
+
+ So, if you see messages like 'Losing too many ticks!' in the
+ kernel logs, and/or you are using this on a notebook which
+ does not yet have an HPET, you should say "Y" here.
+
+config ACPI_CONTAINER
+ tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
+ ---help---
+ This allows _physical_ insertion and removal of CPUs and memory.
+ This can be useful, for example, on NUMA machines that support
+ ACPI based physical hotplug of nodes, or non-NUMA machines that
+ support physical cpu/memory hot-plug.
+
+ If one selects "m", this driver can be loaded with
+ "modprobe acpi_container".
+
+config ACPI_HOTPLUG_MEMORY
+ tristate "Memory Hotplug"
+ depends on ACPI
+ depends on MEMORY_HOTPLUG
+ default n
+ help
+ This driver adds supports for ACPI Memory Hotplug. This driver
+ provides support for fielding notifications on ACPI memory
+ devices (PNP0C80) which represent memory ranges that may be
+ onlined or offlined during runtime.
+
+ Enabling this driver assumes that your platform hardware
+ and firmware have support for hot-plugging physical memory. If
+ your system does not support physically adding or ripping out
+ memory DIMMs at some platfrom defined granularity (individually
+ or as a bank) at runtime, then you need not enable this driver.
+
+ If one selects "m," this driver can be loaded using the following
+ command:
+ $>modprobe acpi_memhotplug
+endif # ACPI
+
+endmenu
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/include/asm-i386/futex.h
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/include/asm-i386/futex.h Tue Jan 31 19:55:22 2006
@@ -0,0 +1,108 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile ( \
+"1: " insn "\n" \
+"2: .section .fixup,\"ax\"\n\
+3: mov %3, %1\n\
+ jmp 2b\n\
+ .previous\n\
+ .section __ex_table,\"a\"\n\
+ .align 8\n\
+ .long 1b,3b\n\
+ .previous" \
+ : "=r" (oldval), "=r" (ret), "=m" (*uaddr) \
+ : "i" (-EFAULT), "m" (*uaddr), "0" (oparg), "1" (0))
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile ( \
+"1: movl %2, %0\n\
+ movl %0, %3\n" \
+ insn "\n" \
+"2: " LOCK "cmpxchgl %3, %2\n\
+ jnz 1b\n\
+3: .section .fixup,\"ax\"\n\
+4: mov %5, %1\n\
+ jmp 3b\n\
+ .previous\n\
+ .section __ex_table,\"a\"\n\
+ .align 8\n\
+ .long 1b,4b,2b,4b\n\
+ .previous" \
+ : "=&a" (oldval), "=&r" (ret), "=m" (*uaddr), \
+ "=&r" (tem) \
+ : "r" (oparg), "i" (-EFAULT), "m" (*uaddr), "1" (0))
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret, tem;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ inc_preempt_count();
+
+ if (op == FUTEX_OP_SET)
+ __futex_atomic_op1("xchgl %0, %2", ret, oldval, uaddr, oparg);
+ else {
+#if !defined(CONFIG_X86_BSWAP) && !defined(CONFIG_UML)
+ if (boot_cpu_data.x86 == 3)
+ ret = -ENOSYS;
+ else
+#endif
+ switch (op) {
+ case FUTEX_OP_ADD:
+ __futex_atomic_op1(LOCK "xaddl %0, %2", ret,
+ oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op2("orl %4, %3", ret, oldval, uaddr,
+ oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op2("andl %4, %3", ret, oldval, uaddr,
+ ~oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op2("xorl %4, %3", ret, oldval, uaddr,
+ oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ }
+
+ dec_preempt_count();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+#endif
+#endif
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/kernel/Kconfig.preempt
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/linux-2.6-xen-sparse/kernel/Kconfig.preempt Tue Jan 31 19:55:22 2006
@@ -0,0 +1,66 @@
+
+choice
+ prompt "Preemption Model"
+ default PREEMPT_NONE
+
+config PREEMPT_NONE
+ bool "No Forced Preemption (Server)"
+ help
+ This is the traditional Linux preemption model, geared towards
+ throughput. It will still provide good latencies most of the
+ time, but there are no guarantees and occasional longer delays
+ are possible.
+
+ Select this option if you are building a kernel for a server or
+ scientific/computation system, or if you want to maximize the
+ raw processing power of the kernel, irrespective of scheduling
+ latencies.
+
+config PREEMPT_VOLUNTARY
+ bool "Voluntary Kernel Preemption (Desktop)"
+ help
+ This option reduces the latency of the kernel by adding more
+ "explicit preemption points" to the kernel code. These new
+ preemption points have been selected to reduce the maximum
+ latency of rescheduling, providing faster application reactions,
+ at the cost of slighly lower throughput.
+
+ This allows reaction to interactive events by allowing a
+ low priority process to voluntarily preempt itself even if it
+ is in kernel mode executing a system call. This allows
+ applications to run more 'smoothly' even when the system is
+ under load.
+
+ Select this if you are building a kernel for a desktop system.
+
+config PREEMPT
+ bool "Preemptible Kernel (Low-Latency Desktop)"
+ depends on !XEN
+ help
+ This option reduces the latency of the kernel by making
+ all kernel code (that is not executing in a critical section)
+ preemptible. This allows reaction to interactive events by
+ permitting a low priority process to be preempted involuntarily
+ even if it is in kernel mode executing a system call and would
+ otherwise not be about to reach a natural preemption point.
+ This allows applications to run more 'smoothly' even when the
+ system is under load, at the cost of slighly lower throughput
+ and a slight runtime overhead to kernel code.
+
+ Select this if you are building a kernel for a desktop or
+ embedded system with latency requirements in the milliseconds
+ range.
+
+endchoice
+
+config PREEMPT_BKL
+ bool "Preempt The Big Kernel Lock"
+ depends on SMP || PREEMPT
+ default y
+ help
+ This option reduces the latency of the kernel by making the
+ big kernel lock preemptible.
+
+ Say Y here if you are building a kernel for a desktop system.
+ Say N if you are unsure.
+
diff -r 9a05a503897c -r 4b06313b9790
patches/linux-2.6.14/i386-mach-io-check-nmi.patch
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/patches/linux-2.6.14/i386-mach-io-check-nmi.patch Tue Jan 31 19:55:22 2006
@@ -0,0 +1,45 @@
+diff -pruN ../pristine-linux-2.6.14/arch/i386/kernel/traps.c
./arch/i386/kernel/traps.c
+--- ../pristine-linux-2.6.14/arch/i386/kernel/traps.c 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/kernel/traps.c 2006-01-31 16:15:06.000000000 +0000
+@@ -532,18 +532,11 @@ static void mem_parity_error(unsigned ch
+
+ static void io_check_error(unsigned char reason, struct pt_regs * regs)
+ {
+- unsigned long i;
+-
+ printk("NMI: IOCK error (debug interrupt?)\n");
+ show_registers(regs);
+
+ /* Re-enable the IOCK line, wait for a few seconds */
+- reason = (reason & 0xf) | 8;
+- outb(reason, 0x61);
+- i = 2000;
+- while (--i) udelay(1000);
+- reason &= ~8;
+- outb(reason, 0x61);
++ clear_io_check_error(reason);
+ }
+
+ static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/mach-default/mach_traps.h
./include/asm-i386/mach-default/mach_traps.h
+--- ../pristine-linux-2.6.14/include/asm-i386/mach-default/mach_traps.h
2005-10-28 01:02:08.000000000 +0100
++++ ./include/asm-i386/mach-default/mach_traps.h 2006-01-31
16:15:06.000000000 +0000
+@@ -15,6 +15,18 @@ static inline void clear_mem_error(unsig
+ outb(reason, 0x61);
+ }
+
++static inline void clear_io_check_error(unsigned char reason)
++{
++ unsigned long i;
++
++ reason = (reason & 0xf) | 8;
++ outb(reason, 0x61);
++ i = 2000;
++ while (--i) udelay(1000);
++ reason &= ~8;
++ outb(reason, 0x61);
++}
++
+ static inline unsigned char get_nmi_reason(void)
+ {
+ return inb(0x61);
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.14/net-csum.patch
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/patches/linux-2.6.14/net-csum.patch Tue Jan 31 19:55:22 2006
@@ -0,0 +1,46 @@
+diff -pruN ../pristine-linux-2.6.14/net/ipv4/netfilter/ip_nat_proto_tcp.c
./net/ipv4/netfilter/ip_nat_proto_tcp.c
+--- ../pristine-linux-2.6.14/net/ipv4/netfilter/ip_nat_proto_tcp.c
2005-10-28 01:02:08.000000000 +0100
++++ ./net/ipv4/netfilter/ip_nat_proto_tcp.c 2006-01-31 16:15:46.000000000
+0000
+@@ -129,10 +129,16 @@ tcp_manip_pkt(struct sk_buff **pskb,
+ if (hdrsize < sizeof(*hdr))
+ return 1;
+
+- hdr->check = ip_nat_cheat_check(~oldip, newip,
++ if ((*pskb)->proto_csum_blank) {
++ hdr->check = ip_nat_cheat_check(oldip, ~newip,
++ ip_nat_cheat_check(oldport ^ 0xFFFF,
++ newport, hdr->check));
++ } else {
++ hdr->check = ip_nat_cheat_check(~oldip, newip,
+ ip_nat_cheat_check(oldport ^ 0xFFFF,
+ newport,
+ hdr->check));
++ }
+ return 1;
+ }
+
+diff -pruN ../pristine-linux-2.6.14/net/ipv4/netfilter/ip_nat_proto_udp.c
./net/ipv4/netfilter/ip_nat_proto_udp.c
+--- ../pristine-linux-2.6.14/net/ipv4/netfilter/ip_nat_proto_udp.c
2005-10-28 01:02:08.000000000 +0100
++++ ./net/ipv4/netfilter/ip_nat_proto_udp.c 2006-01-31 16:15:46.000000000
+0000
+@@ -113,11 +113,19 @@ udp_manip_pkt(struct sk_buff **pskb,
+ newport = tuple->dst.u.udp.port;
+ portptr = &hdr->dest;
+ }
+- if (hdr->check) /* 0 is a special case meaning no checksum */
+- hdr->check = ip_nat_cheat_check(~oldip, newip,
++
++ if (hdr->check) { /* 0 is a special case meaning no checksum */
++ if ((*pskb)->proto_csum_blank) {
++ hdr->check = ip_nat_cheat_check(oldip, ~newip,
++ ip_nat_cheat_check(*portptr ^ 0xFFFF,
++ newport, hdr->check));
++ } else {
++ hdr->check = ip_nat_cheat_check(~oldip, newip,
+ ip_nat_cheat_check(*portptr ^ 0xFFFF,
+ newport,
+ hdr->check));
++ }
++ }
+ *portptr = newport;
+ return 1;
+ }
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.14/pmd-shared.patch
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/patches/linux-2.6.14/pmd-shared.patch Tue Jan 31 19:55:22 2006
@@ -0,0 +1,111 @@
+diff -pru ../pristine-linux-2.6.14/arch/i386/mm/pageattr.c
./arch/i386/mm/pageattr.c
+--- ../pristine-linux-2.6.14/arch/i386/mm/pageattr.c 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/mm/pageattr.c 2006-01-31 15:49:38.000000000 +0000
+@@ -76,7 +76,7 @@ static void set_pmd_pte(pte_t *kpte, uns
+ unsigned long flags;
+
+ set_pte_atomic(kpte, pte); /* change init_mm */
+- if (PTRS_PER_PMD > 1)
++ if (HAVE_SHARED_KERNEL_PMD)
+ return;
+
+ spin_lock_irqsave(&pgd_lock, flags);
+diff -pru ../pristine-linux-2.6.14/arch/i386/mm/pgtable.c
./arch/i386/mm/pgtable.c
+--- ../pristine-linux-2.6.14/arch/i386/mm/pgtable.c 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/mm/pgtable.c 2006-01-31 15:56:50.000000000 +0000
+@@ -212,9 +212,10 @@ void pgd_ctor(void *pgd, kmem_cache_t *c
+ spin_lock_irqsave(&pgd_lock, flags);
+ }
+
+- clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD,
+- swapper_pg_dir + USER_PTRS_PER_PGD,
+- KERNEL_PGD_PTRS);
++ if (PTRS_PER_PMD == 1 || HAVE_SHARED_KERNEL_PMD)
++ clone_pgd_range((pgd_t *)pgd + USER_PTRS_PER_PGD,
++ swapper_pg_dir + USER_PTRS_PER_PGD,
++ KERNEL_PGD_PTRS);
+ if (PTRS_PER_PMD > 1)
+ return;
+
+@@ -246,6 +247,30 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
+ goto out_oom;
+ set_pgd(&pgd[i], __pgd(1 + __pa(pmd)));
+ }
++
++ if (!HAVE_SHARED_KERNEL_PMD) {
++ unsigned long flags;
++
++ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
++ pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL);
++ if (!pmd)
++ goto out_oom;
++ set_pgd(&pgd[USER_PTRS_PER_PGD], __pgd(1 + __pa(pmd)));
++ }
++
++ spin_lock_irqsave(&pgd_lock, flags);
++ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
++ unsigned long v = (unsigned long)i << PGDIR_SHIFT;
++ pgd_t *kpgd = pgd_offset_k(v);
++ pud_t *kpud = pud_offset(kpgd, v);
++ pmd_t *kpmd = pmd_offset(kpud, v);
++ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
++ memcpy(pmd, kpmd, PAGE_SIZE);
++ }
++ pgd_list_add(pgd);
++ spin_unlock_irqrestore(&pgd_lock, flags);
++ }
++
+ return pgd;
+
+ out_oom:
+@@ -260,9 +285,23 @@ void pgd_free(pgd_t *pgd)
+ int i;
+
+ /* in the PAE case user pgd entries are overwritten before usage */
+- if (PTRS_PER_PMD > 1)
+- for (i = 0; i < USER_PTRS_PER_PGD; ++i)
+- kmem_cache_free(pmd_cache, (void
*)__va(pgd_val(pgd[i])-1));
++ if (PTRS_PER_PMD > 1) {
++ for (i = 0; i < USER_PTRS_PER_PGD; ++i) {
++ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
++ kmem_cache_free(pmd_cache, pmd);
++ }
++ if (!HAVE_SHARED_KERNEL_PMD) {
++ unsigned long flags;
++ spin_lock_irqsave(&pgd_lock, flags);
++ pgd_list_del(pgd);
++ spin_unlock_irqrestore(&pgd_lock, flags);
++ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
++ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
++ memset(pmd, 0, PTRS_PER_PMD*sizeof(pmd_t));
++ kmem_cache_free(pmd_cache, pmd);
++ }
++ }
++ }
+ /* in the non-PAE case, free_pgtables() clears user pgd entries */
+ kmem_cache_free(pgd_cache, pgd);
+ }
+diff -pru ../pristine-linux-2.6.14/include/asm-i386/pgtable-2level-defs.h
./include/asm-i386/pgtable-2level-defs.h
+--- ../pristine-linux-2.6.14/include/asm-i386/pgtable-2level-defs.h
2005-10-28 01:02:08.000000000 +0100
++++ ./include/asm-i386/pgtable-2level-defs.h 2006-01-31 15:49:38.000000000
+0000
+@@ -1,6 +1,8 @@
+ #ifndef _I386_PGTABLE_2LEVEL_DEFS_H
+ #define _I386_PGTABLE_2LEVEL_DEFS_H
+
++#define HAVE_SHARED_KERNEL_PMD 0
++
+ /*
+ * traditional i386 two-level paging structure:
+ */
+diff -pru ../pristine-linux-2.6.14/include/asm-i386/pgtable-3level-defs.h
./include/asm-i386/pgtable-3level-defs.h
+--- ../pristine-linux-2.6.14/include/asm-i386/pgtable-3level-defs.h
2005-10-28 01:02:08.000000000 +0100
++++ ./include/asm-i386/pgtable-3level-defs.h 2006-01-31 15:49:38.000000000
+0000
+@@ -1,6 +1,8 @@
+ #ifndef _I386_PGTABLE_3LEVEL_DEFS_H
+ #define _I386_PGTABLE_3LEVEL_DEFS_H
+
++#define HAVE_SHARED_KERNEL_PMD 1
++
+ /*
+ * PGDIR_SHIFT determines what a top-level page table entry can map
+ */
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.14/rcu-nohz.patch
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/patches/linux-2.6.14/rcu-nohz.patch Tue Jan 31 19:55:22 2006
@@ -0,0 +1,16 @@
+diff -pru ../pristine-linux-2.6.14/kernel/rcupdate.c ./kernel/rcupdate.c
+--- ../pristine-linux-2.6.14/kernel/rcupdate.c 2005-10-28 01:02:08.000000000
+0100
++++ ./kernel/rcupdate.c 2006-01-31 16:04:36.000000000 +0000
+@@ -227,8 +227,11 @@ static void rcu_start_batch(struct rcu_c
+ */
+ static void cpu_quiet(int cpu, struct rcu_ctrlblk *rcp, struct rcu_state *rsp)
+ {
++ cpumask_t mask;
++
+ cpu_clear(cpu, rsp->cpumask);
+- if (cpus_empty(rsp->cpumask)) {
++ cpus_andnot(mask, rsp->cpumask, nohz_cpu_mask);
++ if (cpus_empty(mask)) {
+ /* batch completed ! */
+ rcp->completed = rcp->cur;
+ rcu_start_batch(rcp, rsp, 0);
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.14/smp-alts.patch
--- /dev/null Tue Jan 31 18:55:55 2006
+++ b/patches/linux-2.6.14/smp-alts.patch Tue Jan 31 19:55:22 2006
@@ -0,0 +1,563 @@
+diff -pruN ../pristine-linux-2.6.14/arch/i386/Kconfig ./arch/i386/Kconfig
+--- ../pristine-linux-2.6.14/arch/i386/Kconfig 2005-10-28 01:02:08.000000000
+0100
++++ ./arch/i386/Kconfig 2006-01-31 16:05:37.000000000 +0000
+@@ -495,6 +495,19 @@ config SMP
+
+ If you don't know what to do here, say N.
+
++config SMP_ALTERNATIVES
++ bool "SMP alternatives support (EXPERIMENTAL)"
++ depends on SMP && EXPERIMENTAL
++ help
++ Try to reduce the overhead of running an SMP kernel on a uniprocessor
++ host slightly by replacing certain key instruction sequences
++ according to whether we currently have more than one CPU available.
++ This should provide a noticeable boost to performance when
++ running SMP kernels on UP machines, and have negligible impact
++ when running on an true SMP host.
++
++ If unsure, say N.
++
+ config NR_CPUS
+ int "Maximum number of CPUs (2-255)"
+ range 2 255
+diff -pruN ../pristine-linux-2.6.14/arch/i386/kernel/Makefile
./arch/i386/kernel/Makefile
+--- ../pristine-linux-2.6.14/arch/i386/kernel/Makefile 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/kernel/Makefile 2006-01-31 16:05:37.000000000 +0000
+@@ -34,6 +34,7 @@ obj-$(CONFIG_ACPI_SRAT) += srat.o
+ obj-$(CONFIG_HPET_TIMER) += time_hpet.o
+ obj-$(CONFIG_EFI) += efi.o efi_stub.o
+ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
++obj-$(CONFIG_SMP_ALTERNATIVES) += smpalts.o
+
+ EXTRA_AFLAGS := -traditional
+
+diff -pruN ../pristine-linux-2.6.14/arch/i386/kernel/smpalts.c
./arch/i386/kernel/smpalts.c
+--- ../pristine-linux-2.6.14/arch/i386/kernel/smpalts.c 1970-01-01
01:00:00.000000000 +0100
++++ ./arch/i386/kernel/smpalts.c 2006-01-31 16:05:37.000000000 +0000
+@@ -0,0 +1,85 @@
++#include <linux/kernel.h>
++#include <asm/system.h>
++#include <asm/smp_alt.h>
++#include <asm/processor.h>
++#include <asm/string.h>
++
++struct smp_replacement_record {
++ unsigned char targ_size;
++ unsigned char smp1_size;
++ unsigned char smp2_size;
++ unsigned char up_size;
++ unsigned char feature;
++ unsigned char data[0];
++};
++
++struct smp_alternative_record {
++ void *targ_start;
++ struct smp_replacement_record *repl;
++};
++
++extern struct smp_alternative_record __start_smp_alternatives_table,
++ __stop_smp_alternatives_table;
++extern unsigned long __init_begin, __init_end;
++
++void prepare_for_smp(void)
++{
++ struct smp_alternative_record *r;
++ printk(KERN_INFO "Enabling SMP...\n");
++ for (r = &__start_smp_alternatives_table;
++ r != &__stop_smp_alternatives_table;
++ r++) {
++ BUG_ON(r->repl->targ_size < r->repl->smp1_size);
++ BUG_ON(r->repl->targ_size < r->repl->smp2_size);
++ BUG_ON(r->repl->targ_size < r->repl->up_size);
++ if (system_state == SYSTEM_RUNNING &&
++ r->targ_start >= (void *)&__init_begin &&
++ r->targ_start < (void *)&__init_end)
++ continue;
++ if (r->repl->feature != (unsigned char)-1 &&
++ boot_cpu_has(r->repl->feature)) {
++ memcpy(r->targ_start,
++ r->repl->data + r->repl->smp1_size,
++ r->repl->smp2_size);
++ memset(r->targ_start + r->repl->smp2_size,
++ 0x90,
++ r->repl->targ_size - r->repl->smp2_size);
++ } else {
++ memcpy(r->targ_start,
++ r->repl->data,
++ r->repl->smp1_size);
++ memset(r->targ_start + r->repl->smp1_size,
++ 0x90,
++ r->repl->targ_size - r->repl->smp1_size);
++ }
++ }
++ /* Paranoia */
++ asm volatile ("jmp 1f\n1:");
++ mb();
++}
++
++void unprepare_for_smp(void)
++{
++ struct smp_alternative_record *r;
++ printk(KERN_INFO "Disabling SMP...\n");
++ for (r = &__start_smp_alternatives_table;
++ r != &__stop_smp_alternatives_table;
++ r++) {
++ BUG_ON(r->repl->targ_size < r->repl->smp1_size);
++ BUG_ON(r->repl->targ_size < r->repl->smp2_size);
++ BUG_ON(r->repl->targ_size < r->repl->up_size);
++ if (system_state == SYSTEM_RUNNING &&
++ r->targ_start >= (void *)&__init_begin &&
++ r->targ_start < (void *)&__init_end)
++ continue;
++ memcpy(r->targ_start,
++ r->repl->data + r->repl->smp1_size + r->repl->smp2_size,
++ r->repl->up_size);
++ memset(r->targ_start + r->repl->up_size,
++ 0x90,
++ r->repl->targ_size - r->repl->up_size);
++ }
++ /* Paranoia */
++ asm volatile ("jmp 1f\n1:");
++ mb();
++}
+diff -pruN ../pristine-linux-2.6.14/arch/i386/kernel/smpboot.c
./arch/i386/kernel/smpboot.c
+--- ../pristine-linux-2.6.14/arch/i386/kernel/smpboot.c 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/kernel/smpboot.c 2006-01-31 16:06:47.000000000 +0000
+@@ -1185,6 +1185,11 @@ static void __init smp_boot_cpus(unsigne
+ if (max_cpus <= cpucount+1)
+ continue;
+
++#ifdef CONFIG_SMP_ALTERNATIVES
++ if (kicked == 1)
++ prepare_for_smp();
++#endif
++
+ if (((cpu = alloc_cpu_id()) <= 0) || do_boot_cpu(apicid, cpu))
+ printk("CPU #%d not responding - cannot use it.\n",
+ apicid);
+@@ -1355,6 +1360,11 @@ int __devinit __cpu_up(unsigned int cpu)
+ return -EIO;
+ }
+
++#ifdef CONFIG_SMP_ALTERNATIVES
++ if (num_online_cpus() == 1)
++ prepare_for_smp();
++#endif
++
+ local_irq_enable();
+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+ /* Unleash the CPU! */
+diff -pruN ../pristine-linux-2.6.14/arch/i386/kernel/vmlinux.lds.S
./arch/i386/kernel/vmlinux.lds.S
+--- ../pristine-linux-2.6.14/arch/i386/kernel/vmlinux.lds.S 2005-10-28
01:02:08.000000000 +0100
++++ ./arch/i386/kernel/vmlinux.lds.S 2006-01-31 16:05:37.000000000 +0000
+@@ -34,6 +34,13 @@ SECTIONS
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { *(__ex_table) }
+ __stop___ex_table = .;
+
++ . = ALIGN(16);
++ __start_smp_alternatives_table = .;
++ __smp_alternatives : { *(__smp_alternatives) }
++ __stop_smp_alternatives_table = .;
++
++ __smp_replacements : { *(__smp_replacements) }
++
+ RODATA
+
+ /* writeable */
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/atomic.h
./include/asm-i386/atomic.h
+--- ../pristine-linux-2.6.14/include/asm-i386/atomic.h 2005-10-28
01:02:08.000000000 +0100
++++ ./include/asm-i386/atomic.h 2006-01-31 16:05:37.000000000 +0000
+@@ -4,18 +4,13 @@
+ #include <linux/config.h>
+ #include <linux/compiler.h>
+ #include <asm/processor.h>
++#include <asm/smp_alt.h>
+
+ /*
+ * Atomic operations that C can't guarantee us. Useful for
+ * resource counting etc..
+ */
+
+-#ifdef CONFIG_SMP
+-#define LOCK "lock ; "
+-#else
+-#define LOCK ""
+-#endif
+-
+ /*
+ * Make sure gcc doesn't try to be clever and move things around
+ * on us. We need to use _exactly_ the address the user gave us,
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/bitops.h
./include/asm-i386/bitops.h
+--- ../pristine-linux-2.6.14/include/asm-i386/bitops.h 2005-10-28
01:02:08.000000000 +0100
++++ ./include/asm-i386/bitops.h 2006-01-31 16:05:37.000000000 +0000
+@@ -7,6 +7,7 @@
+
+ #include <linux/config.h>
+ #include <linux/compiler.h>
++#include <asm/smp_alt.h>
+
+ /*
+ * These have to be done with inline assembly: that way the bit-setting
+@@ -16,12 +17,6 @@
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+
+-#ifdef CONFIG_SMP
+-#define LOCK_PREFIX "lock ; "
+-#else
+-#define LOCK_PREFIX ""
+-#endif
+-
+ #define ADDR (*(volatile long *) addr)
+
+ /**
+@@ -41,7 +36,7 @@
+ */
+ static inline void set_bit(int nr, volatile unsigned long * addr)
+ {
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btsl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+@@ -76,7 +71,7 @@ static inline void __set_bit(int nr, vol
+ */
+ static inline void clear_bit(int nr, volatile unsigned long * addr)
+ {
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btrl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+@@ -121,7 +116,7 @@ static inline void __change_bit(int nr,
+ */
+ static inline void change_bit(int nr, volatile unsigned long * addr)
+ {
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btcl %1,%0"
+ :"=m" (ADDR)
+ :"Ir" (nr));
+@@ -140,7 +135,7 @@ static inline int test_and_set_bit(int n
+ {
+ int oldbit;
+
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btsl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+@@ -180,7 +175,7 @@ static inline int test_and_clear_bit(int
+ {
+ int oldbit;
+
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btrl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+@@ -231,7 +226,7 @@ static inline int test_and_change_bit(in
+ {
+ int oldbit;
+
+- __asm__ __volatile__( LOCK_PREFIX
++ __asm__ __volatile__( LOCK
+ "btcl %2,%1\n\tsbbl %0,%0"
+ :"=r" (oldbit),"=m" (ADDR)
+ :"Ir" (nr) : "memory");
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/rwsem.h
./include/asm-i386/rwsem.h
+--- ../pristine-linux-2.6.14/include/asm-i386/rwsem.h 2005-10-28
01:02:08.000000000 +0100
++++ ./include/asm-i386/rwsem.h 2006-01-31 16:05:37.000000000 +0000
+@@ -40,6 +40,7 @@
+
+ #include <linux/list.h>
+ #include <linux/spinlock.h>
++#include <asm/smp_alt.h>
+
+ struct rwsem_waiter;
+
+@@ -99,7 +100,7 @@ static inline void __down_read(struct rw
+ {
+ __asm__ __volatile__(
+ "# beginning down_read\n\t"
+-LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old
value */
++LOCK " incl (%%eax)\n\t" /* adds 0x00000001, returns the old
value */
+ " js 2f\n\t" /* jump if we weren't granted the lock */
+ "1:\n\t"
+ LOCK_SECTION_START("")
+@@ -130,7 +131,7 @@ static inline int __down_read_trylock(st
+ " movl %1,%2\n\t"
+ " addl %3,%2\n\t"
+ " jle 2f\n\t"
+-LOCK_PREFIX " cmpxchgl %2,%0\n\t"
++LOCK " cmpxchgl %2,%0\n\t"
+ " jnz 1b\n\t"
+ "2:\n\t"
+ "# ending __down_read_trylock\n\t"
+@@ -150,7 +151,7 @@ static inline void __down_write(struct r
+ tmp = RWSEM_ACTIVE_WRITE_BIAS;
+ __asm__ __volatile__(
+ "# beginning down_write\n\t"
+-LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns
the old value */
++LOCK " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns
the old value */
+ " testl %%edx,%%edx\n\t" /* was the count 0 before? */
+ " jnz 2f\n\t" /* jump if we weren't granted the lock */
+ "1:\n\t"
+@@ -188,7 +189,7 @@ static inline void __up_read(struct rw_s
+ __s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
+ __asm__ __volatile__(
+ "# beginning __up_read\n\t"
+-LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old
value */
++LOCK " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old
value */
+ " js 2f\n\t" /* jump if the lock is being waited upon */
+ "1:\n\t"
+ LOCK_SECTION_START("")
+@@ -214,7 +215,7 @@ static inline void __up_write(struct rw_
+ __asm__ __volatile__(
+ "# beginning __up_write\n\t"
+ " movl %2,%%edx\n\t"
+-LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition
0xffff0001 -> 0x00000000 */
++LOCK " xaddl %%edx,(%%eax)\n\t" /* tries to transition
0xffff0001 -> 0x00000000 */
+ " jnz 2f\n\t" /* jump if the lock is being waited upon */
+ "1:\n\t"
+ LOCK_SECTION_START("")
+@@ -239,7 +240,7 @@ static inline void __downgrade_write(str
+ {
+ __asm__ __volatile__(
+ "# beginning __downgrade_write\n\t"
+-LOCK_PREFIX " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 ->
0xYYYY0001 */
++LOCK " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 ->
0xYYYY0001 */
+ " js 2f\n\t" /* jump if the lock is being waited upon */
+ "1:\n\t"
+ LOCK_SECTION_START("")
+@@ -263,7 +264,7 @@ LOCK_PREFIX " addl %2,(%%eax)\n\t"
+ static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+ {
+ __asm__ __volatile__(
+-LOCK_PREFIX "addl %1,%0"
++LOCK "addl %1,%0"
+ : "=m"(sem->count)
+ : "ir"(delta), "m"(sem->count));
+ }
+@@ -276,7 +277,7 @@ static inline int rwsem_atomic_update(in
+ int tmp = delta;
+
+ __asm__ __volatile__(
+-LOCK_PREFIX "xadd %0,(%2)"
++LOCK "xadd %0,(%2)"
+ : "+r"(tmp), "=m"(sem->count)
+ : "r"(sem), "m"(sem->count)
+ : "memory");
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/smp_alt.h
./include/asm-i386/smp_alt.h
+--- ../pristine-linux-2.6.14/include/asm-i386/smp_alt.h 1970-01-01
01:00:00.000000000 +0100
++++ ./include/asm-i386/smp_alt.h 2006-01-31 16:05:37.000000000 +0000
+@@ -0,0 +1,32 @@
++#ifndef __ASM_SMP_ALT_H__
++#define __ASM_SMP_ALT_H__
++
++#include <linux/config.h>
++
++#ifdef CONFIG_SMP
++#if defined(CONFIG_SMP_ALTERNATIVES) && !defined(MODULE)
++#define LOCK \
++ "6677: nop\n" \
++ ".section __smp_alternatives,\"a\"\n" \
++ ".long 6677b\n" \
++ ".long 6678f\n" \
++ ".previous\n" \
++ ".section __smp_replacements,\"a\"\n" \
++ "6678: .byte 1\n" \
++ ".byte 1\n" \
++ ".byte 0\n" \
++ ".byte 1\n" \
++ ".byte -1\n" \
++ "lock\n" \
++ "nop\n" \
++ ".previous\n"
++void prepare_for_smp(void);
++void unprepare_for_smp(void);
++#else
++#define LOCK "lock ; "
++#endif
++#else
++#define LOCK ""
++#endif
++
++#endif /* __ASM_SMP_ALT_H__ */
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/spinlock.h
./include/asm-i386/spinlock.h
+--- ../pristine-linux-2.6.14/include/asm-i386/spinlock.h 2005-10-28
01:02:08.000000000 +0100
++++ ./include/asm-i386/spinlock.h 2006-01-31 16:09:52.000000000 +0000
+@@ -6,6 +6,7 @@
+ #include <asm/page.h>
+ #include <linux/config.h>
+ #include <linux/compiler.h>
++#include <asm/smp_alt.h>
+
+ /*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+@@ -23,7 +24,8 @@
+
+ #define __raw_spin_lock_string \
+ "\n1:\t" \
+- "lock ; decb %0\n\t" \
++ LOCK \
++ "decb %0\n\t" \
+ "jns 3f\n" \
+ "2:\t" \
+ "rep;nop\n\t" \
+@@ -34,7 +36,8 @@
+
+ #define __raw_spin_lock_string_flags \
+ "\n1:\t" \
+- "lock ; decb %0\n\t" \
++ LOCK \
++ "decb %0\n\t" \
+ "jns 4f\n\t" \
+ "2:\t" \
+ "testl $0x200, %1\n\t" \
+@@ -65,10 +68,34 @@ static inline void __raw_spin_lock_flags
+ static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+ {
+ char oldval;
++#ifdef CONFIG_SMP_ALTERNATIVES
+ __asm__ __volatile__(
+- "xchgb %b0,%1"
++ "1:movb %1,%b0\n"
++ "movb $0,%1\n"
++ "2:"
++ ".section __smp_alternatives,\"a\"\n"
++ ".long 1b\n"
++ ".long 3f\n"
++ ".previous\n"
++ ".section __smp_replacements,\"a\"\n"
++ "3: .byte 2b - 1b\n"
++ ".byte 5f-4f\n"
++ ".byte 0\n"
++ ".byte 6f-5f\n"
++ ".byte -1\n"
++ "4: xchgb %b0,%1\n"
++ "5: movb %1,%b0\n"
++ "movb $0,%1\n"
++ "6:\n"
++ ".previous\n"
+ :"=q" (oldval), "=m" (lock->slock)
+ :"0" (0) : "memory");
++#else
++ __asm__ __volatile__(
++ "xchgb %b0,%1\n"
++ :"=q" (oldval), "=m" (lock->slock)
++ :"0" (0) : "memory");
++#endif
+ return oldval > 0;
+ }
+
+@@ -178,12 +205,12 @@ static inline int __raw_write_trylock(ra
+
+ static inline void __raw_read_unlock(raw_rwlock_t *rw)
+ {
+- asm volatile("lock ; incl %0" :"=m" (rw->lock) : : "memory");
++ asm volatile(LOCK "incl %0" :"=m" (rw->lock) : : "memory");
+ }
+
+ static inline void __raw_write_unlock(raw_rwlock_t *rw)
+ {
+- asm volatile("lock ; addl $" RW_LOCK_BIAS_STR ", %0"
++ asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR ", %0"
+ : "=m" (rw->lock) : : "memory");
+ }
+
+diff -pruN ../pristine-linux-2.6.14/include/asm-i386/system.h
./include/asm-i386/system.h
+--- ../pristine-linux-2.6.14/include/asm-i386/system.h 2005-10-28
01:02:08.000000000 +0100
++++ ./include/asm-i386/system.h 2006-01-31 16:05:37.000000000 +0000
+@@ -5,7 +5,7 @@
+ #include <linux/kernel.h>
+ #include <asm/segment.h>
+ #include <asm/cpufeature.h>
+-#include <linux/bitops.h> /* for LOCK_PREFIX */
++#include <asm/smp_alt.h>
+
+ #ifdef __KERNEL__
+
+@@ -267,19 +267,19 @@ static inline unsigned long __cmpxchg(vo
+ unsigned long prev;
+ switch (size) {
+ case 1:
+- __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
++ __asm__ __volatile__(LOCK "cmpxchgb %b1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 2:
+- __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
++ __asm__ __volatile__(LOCK "cmpxchgw %w1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+ return prev;
+ case 4:
+- __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
++ __asm__ __volatile__(LOCK "cmpxchgl %1,%2"
+ : "=a"(prev)
+ : "q"(new), "m"(*__xg(ptr)), "0"(old)
+ : "memory");
+@@ -443,11 +443,55 @@ struct alt_instr {
+ #endif
+
+ #ifdef CONFIG_SMP
+-#define smp_mb() mb()
+-#define smp_rmb() rmb()
+ #define smp_wmb() wmb()
+-#define smp_read_barrier_depends() read_barrier_depends()
++#if defined(CONFIG_SMP_ALTERNATIVES) && !defined(MODULE)
++#define smp_alt_mb(instr) \
++__asm__ __volatile__("6667:\nnop\nnop\nnop\nnop\nnop\nnop\n6668:\n" \
++ ".section __smp_alternatives,\"a\"\n" \
++ ".long 6667b\n" \
++ ".long 6673f\n" \
++ ".previous\n" \
++ ".section __smp_replacements,\"a\"\n" \
++ "6673:.byte 6668b-6667b\n" \
++ ".byte 6670f-6669f\n" \
++ ".byte 6671f-6670f\n" \
++ ".byte 0\n" \
++ ".byte %c0\n" \
++ "6669:lock;addl $0,0(%%esp)\n" \
++ "6670:" instr "\n" \
++ "6671:\n" \
++ ".previous\n" \
++ : \
++ : "i" (X86_FEATURE_XMM2) \
++ : "memory")
++#define smp_rmb() smp_alt_mb("lfence")
++#define smp_mb() smp_alt_mb("mfence")
++#define set_mb(var, value) do { \
++unsigned long __set_mb_temp; \
++__asm__ __volatile__("6667:movl %1, %0\n6668:\n" \
++ ".section __smp_alternatives,\"a\"\n" \
++ ".long 6667b\n" \
++ ".long 6673f\n" \
++ ".previous\n" \
++ ".section __smp_replacements,\"a\"\n" \
++ "6673: .byte 6668b-6667b\n" \
++ ".byte 6670f-6669f\n" \
++ ".byte 0\n" \
++ ".byte 6671f-6670f\n" \
++ ".byte -1\n" \
++ "6669: xchg %1, %0\n" \
++ "6670:movl %1, %0\n" \
++ "6671:\n" \
++ ".previous\n" \
++ : "=m" (var), "=r" (__set_mb_temp) \
++ : "1" (value) \
++ : "memory"); } while (0)
++#else
++#define smp_rmb() rmb()
++#define smp_mb() mb()
+ #define set_mb(var, value) do { xchg(&var, value); } while (0)
++#endif
++#define smp_read_barrier_depends() read_barrier_depends()
+ #else
+ #define smp_mb() barrier()
+ #define smp_rmb() barrier()
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/i386_ksyms-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/i386_ksyms-xen.c Tue Jan 31
18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,185 +0,0 @@
-#include <linux/config.h>
-#include <linux/module.h>
-#include <linux/smp.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/mca.h>
-#include <linux/sched.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
-#include <linux/pm.h>
-#include <linux/pci.h>
-#include <linux/apm_bios.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/highmem.h>
-#include <linux/time.h>
-
-#include <asm/semaphore.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/uaccess.h>
-#include <asm/checksum.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/irq.h>
-#include <asm/mmx.h>
-#include <asm/desc.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/nmi.h>
-#include <asm/ist.h>
-#include <asm/kdebug.h>
-
-extern void dump_thread(struct pt_regs *, struct user *);
-extern spinlock_t rtc_lock;
-
-/* This is definitely a GPL-only symbol */
-EXPORT_SYMBOL_GPL(cpu_gdt_table);
-
-#if defined(CONFIG_APM_MODULE)
-extern void machine_real_restart(unsigned char *, int);
-EXPORT_SYMBOL(machine_real_restart);
-extern void default_idle(void);
-EXPORT_SYMBOL(default_idle);
-#endif
-
-#ifdef CONFIG_SMP
-extern void FASTCALL( __write_lock_failed(rwlock_t *rw));
-extern void FASTCALL( __read_lock_failed(rwlock_t *rw));
-#endif
-
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) ||
defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-extern struct drive_info_struct drive_info;
-EXPORT_SYMBOL(drive_info);
-#endif
-
-extern unsigned long cpu_khz;
-extern unsigned long get_cmos_time(void);
-
-/* platform dependent support */
-EXPORT_SYMBOL(boot_cpu_data);
-#ifdef CONFIG_DISCONTIGMEM
-EXPORT_SYMBOL(node_data);
-EXPORT_SYMBOL(physnode_map);
-#endif
-#ifdef CONFIG_X86_NUMAQ
-EXPORT_SYMBOL(xquad_portio);
-#endif
-EXPORT_SYMBOL(dump_thread);
-EXPORT_SYMBOL(dump_fpu);
-EXPORT_SYMBOL_GPL(kernel_fpu_begin);
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(ioremap_nocache);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(pm_idle);
-EXPORT_SYMBOL(pm_power_off);
-EXPORT_SYMBOL(get_cmos_time);
-EXPORT_SYMBOL(cpu_khz);
-EXPORT_SYMBOL(apm_info);
-
-EXPORT_SYMBOL(__down_failed);
-EXPORT_SYMBOL(__down_failed_interruptible);
-EXPORT_SYMBOL(__down_failed_trylock);
-EXPORT_SYMBOL(__up_wakeup);
-/* Networking helper routines. */
-EXPORT_SYMBOL(csum_partial_copy_generic);
-/* Delay loops */
-EXPORT_SYMBOL(__ndelay);
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-
-EXPORT_SYMBOL(__get_user_1);
-EXPORT_SYMBOL(__get_user_2);
-EXPORT_SYMBOL(__get_user_4);
-
-EXPORT_SYMBOL(__put_user_1);
-EXPORT_SYMBOL(__put_user_2);
-EXPORT_SYMBOL(__put_user_4);
-EXPORT_SYMBOL(__put_user_8);
-
-EXPORT_SYMBOL(strpbrk);
-EXPORT_SYMBOL(strstr);
-
-EXPORT_SYMBOL(strncpy_from_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(clear_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__copy_from_user_ll);
-EXPORT_SYMBOL(__copy_to_user_ll);
-EXPORT_SYMBOL(strnlen_user);
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(pci_mem_start);
-#endif
-
-#ifdef CONFIG_PCI_BIOS
-EXPORT_SYMBOL(pcibios_set_irq_routing);
-EXPORT_SYMBOL(pcibios_get_irq_routing_table);
-#endif
-
-#ifdef CONFIG_X86_USE_3DNOW
-EXPORT_SYMBOL(_mmx_memcpy);
-EXPORT_SYMBOL(mmx_clear_page);
-EXPORT_SYMBOL(mmx_copy_page);
-#endif
-
-#ifdef CONFIG_X86_HT
-EXPORT_SYMBOL(smp_num_siblings);
-EXPORT_SYMBOL(cpu_sibling_map);
-#endif
-
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(__write_lock_failed);
-EXPORT_SYMBOL(__read_lock_failed);
-
-/* Global SMP stuff */
-EXPORT_SYMBOL(smp_call_function);
-
-/* TLB flushing */
-EXPORT_SYMBOL(flush_tlb_page);
-#endif
-
-#ifdef CONFIG_X86_IO_APIC
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-#endif
-
-#ifdef CONFIG_MCA
-EXPORT_SYMBOL(machine_id);
-#endif
-
-#ifdef CONFIG_VT
-EXPORT_SYMBOL(screen_info);
-#endif
-
-EXPORT_SYMBOL(get_wchan);
-
-EXPORT_SYMBOL(rtc_lock);
-
-EXPORT_SYMBOL_GPL(set_nmi_callback);
-EXPORT_SYMBOL_GPL(unset_nmi_callback);
-
-EXPORT_SYMBOL(register_die_notifier);
-#ifdef CONFIG_HAVE_DEC_LOCK
-EXPORT_SYMBOL(_atomic_dec_and_lock);
-#endif
-
-EXPORT_SYMBOL(__PAGE_KERNEL);
-
-#ifdef CONFIG_HIGHMEM
-EXPORT_SYMBOL(kmap);
-EXPORT_SYMBOL(kunmap);
-EXPORT_SYMBOL(kmap_atomic);
-EXPORT_SYMBOL(kunmap_atomic);
-EXPORT_SYMBOL(kmap_atomic_to_page);
-#endif
-
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) ||
defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
-EXPORT_SYMBOL(ist_info);
-#endif
-
-EXPORT_SYMBOL(csum_partial);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/kernel/signal-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/signal-xen.c Tue Jan 31
18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,665 +0,0 @@
-/*
- * linux/arch/i386/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/suspend.h>
-#include <linux/ptrace.h>
-#include <linux/elf.h>
-#include <asm/processor.h>
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-#include "sigframe.h"
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(int history0, int history1, old_sigset_t mask)
-{
- struct pt_regs * regs = (struct pt_regs *) &history0;
- sigset_t saveset;
-
- mask &= _BLOCKABLE;
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- siginitset(¤t->blocked, mask);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs->eax = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_rt_sigsuspend(struct pt_regs regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (regs.ecx != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, (sigset_t __user *)regs.ebx,
sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- regs.eax = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(®s, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage int
-sys_sigaction(int sig, const struct old_sigaction __user *act,
- struct old_sigaction __user *oact)
-{
- struct k_sigaction new_ka, old_ka;
- int ret;
-
- if (act) {
- old_sigset_t mask;
- if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
- __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
- __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
- return -EFAULT;
- __get_user(new_ka.sa.sa_flags, &act->sa_flags);
- __get_user(mask, &act->sa_mask);
- siginitset(&new_ka.sa.sa_mask, mask);
- }
-
- ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
- if (!ret && oact) {
- if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
- __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
- __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
- return -EFAULT;
- __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
- __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
- }
-
- return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(unsigned long ebx)
-{
- /* This is needed to make gcc realize it doesn't own the "struct
pt_regs" */
- struct pt_regs *regs = (struct pt_regs *)&ebx;
- const stack_t __user *uss = (const stack_t __user *)ebx;
- stack_t __user *uoss = (stack_t __user *)regs->ecx;
-
- return do_sigaltstack(uss, uoss, regs->esp);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, int
*peax)
-{
- unsigned int err = 0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->x)
-
-#define COPY_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->x##seg = tmp; }
-
-#define COPY_SEG_STRICT(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- regs->x##seg = tmp|3; }
-
-#define GET_SEG(seg) \
- { unsigned short tmp; \
- err |= __get_user(tmp, &sc->seg); \
- loadsegment(seg,tmp); }
-
-#define FIX_EFLAGS (X86_EFLAGS_AC | X86_EFLAGS_OF | X86_EFLAGS_DF
| \
- X86_EFLAGS_TF | X86_EFLAGS_SF | X86_EFLAGS_ZF | \
- X86_EFLAGS_AF | X86_EFLAGS_PF | X86_EFLAGS_CF)
-
- GET_SEG(gs);
- GET_SEG(fs);
- COPY_SEG(es);
- COPY_SEG(ds);
- COPY(edi);
- COPY(esi);
- COPY(ebp);
- COPY(esp);
- COPY(ebx);
- COPY(edx);
- COPY(ecx);
- COPY(eip);
- COPY_SEG_STRICT(cs);
- COPY_SEG_STRICT(ss);
-
- {
- unsigned int tmpflags;
- err |= __get_user(tmpflags, &sc->eflags);
- regs->eflags = (regs->eflags & ~FIX_EFLAGS) | (tmpflags &
FIX_EFLAGS);
- regs->orig_eax = -1; /* disable syscall checks */
- }
-
- {
- struct _fpstate __user * buf;
- err |= __get_user(buf, &sc->fpstate);
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- } else {
- struct task_struct *me = current;
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
- }
-
- err |= __get_user(*peax, &sc->eax);
- return err;
-
-badframe:
- return 1;
-}
-
-asmlinkage int sys_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct sigframe __user *frame = (struct sigframe __user *)(regs->esp -
8);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__get_user(set.sig[0], &frame->sc.oldmask)
- || (_NSIG_WORDS > 1
- && __copy_from_user(&set.sig[1], &frame->extramask,
- sizeof(frame->extramask))))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->sc, &eax))
- goto badframe;
- return eax;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(unsigned long __unused)
-{
- struct pt_regs *regs = (struct pt_regs *) &__unused;
- struct rt_sigframe __user *frame = (struct rt_sigframe __user
*)(regs->esp - 4);
- sigset_t set;
- int eax;
-
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
- goto badframe;
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
- goto badframe;
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
- goto badframe;
-
- if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->esp) == -EFAULT)
- goto badframe;
-
- return eax;
-
-badframe:
- force_sig(SIGSEGV, current);
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext __user *sc, struct _fpstate __user *fpstate,
- struct pt_regs *regs, unsigned long mask)
-{
- int tmp, err = 0;
-
- tmp = 0;
- __asm__("movl %%gs,%0" : "=r"(tmp): "0"(tmp));
- err |= __put_user(tmp, (unsigned int __user *)&sc->gs);
- __asm__("movl %%fs,%0" : "=r"(tmp): "0"(tmp));
- err |= __put_user(tmp, (unsigned int __user *)&sc->fs);
-
- err |= __put_user(regs->xes, (unsigned int __user *)&sc->es);
- err |= __put_user(regs->xds, (unsigned int __user *)&sc->ds);
- err |= __put_user(regs->edi, &sc->edi);
- err |= __put_user(regs->esi, &sc->esi);
- err |= __put_user(regs->ebp, &sc->ebp);
- err |= __put_user(regs->esp, &sc->esp);
- err |= __put_user(regs->ebx, &sc->ebx);
- err |= __put_user(regs->edx, &sc->edx);
- err |= __put_user(regs->ecx, &sc->ecx);
- err |= __put_user(regs->eax, &sc->eax);
- err |= __put_user(current->thread.trap_no, &sc->trapno);
- err |= __put_user(current->thread.error_code, &sc->err);
- err |= __put_user(regs->eip, &sc->eip);
- err |= __put_user(regs->xcs, (unsigned int __user *)&sc->cs);
- err |= __put_user(regs->eflags, &sc->eflags);
- err |= __put_user(regs->esp, &sc->esp_at_signal);
- err |= __put_user(regs->xss, (unsigned int __user *)&sc->ss);
-
- tmp = save_i387(fpstate);
- if (tmp < 0)
- err = 1;
- else
- err |= __put_user(tmp ? fpstate : NULL, &sc->fpstate);
-
- /* non-iBCS2 extensions.. */
- err |= __put_user(mask, &sc->oldmask);
- err |= __put_user(current->thread.cr2, &sc->cr2);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void __user *
-get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
-{
- unsigned long esp;
-
- /* Default to using normal stack */
- esp = regs->esp;
-
- /* This is the X/Open sanctioned signal stack switching. */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(esp) == 0)
- esp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- /* This is the legacy signal stack switching. */
- else if ((regs->xss & 0xffff) != __USER_DS &&
- !(ka->sa.sa_flags & SA_RESTORER) &&
- ka->sa.sa_restorer) {
- esp = (unsigned long) ka->sa.sa_restorer;
- }
-
- return (void __user *)((esp - frame_size) & -8ul);
-}
-
-/* These symbols are defined with the addresses in the vsyscall page.
- See vsyscall-sigreturn.S. */
-extern void __user __kernel_sigreturn;
-extern void __user __kernel_rt_sigreturn;
-
-static void setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs)
-{
- void __user *restorer;
- struct sigframe __user *frame;
- int err = 0;
- int usig;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err = __put_user(usig, &frame->sig);
- if (err)
- goto give_sigsegv;
-
- err = setup_sigcontext(&frame->sc, &frame->fpstate, regs, set->sig[0]);
- if (err)
- goto give_sigsegv;
-
- if (_NSIG_WORDS > 1) {
- err = __copy_to_user(&frame->extramask, &set->sig[1],
- sizeof(frame->extramask));
- if (err)
- goto give_sigsegv;
- }
-
- restorer = &__kernel_sigreturn;
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
-
- /* Set up to return from userspace. */
- err |= __put_user(restorer, &frame->pretcode);
-
- /*
- * This is popl %eax ; movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb858, (short __user *)(frame->retcode+0));
- err |= __put_user(__NR_sigreturn, (int __user *)(frame->retcode+2));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+6));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->esp = (unsigned long) frame;
- regs->eip = (unsigned long) ka->sa.sa_handler;
- regs->eax = (unsigned long) sig;
- regs->edx = (unsigned long) 0;
- regs->ecx = (unsigned long) 0;
-
- set_fs(USER_DS);
- regs->xds = __USER_DS;
- regs->xes = __USER_DS;
- regs->xss = __USER_DS;
- regs->xcs = __USER_CS;
-
- /*
- * Clear TF when entering the signal handler, but
- * notify any tracer that was single-stepping it.
- * The tracer may want to single-step inside the
- * handler too.
- */
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->eip, frame->pretcode);
-#endif
-
- return;
-
-give_sigsegv:
- force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
-{
- void __user *restorer;
- struct rt_sigframe __user *frame;
- int err = 0;
- int usig;
-
- frame = get_sigframe(ka, regs, sizeof(*frame));
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- usig = current_thread_info()->exec_domain
- && current_thread_info()->exec_domain->signal_invmap
- && sig < 32
- ? current_thread_info()->exec_domain->signal_invmap[sig]
- : sig;
-
- err |= __put_user(usig, &frame->sig);
- err |= __put_user(&frame->info, &frame->pinfo);
- err |= __put_user(&frame->uc, &frame->puc);
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(regs->esp),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, &frame->fpstate,
- regs, set->sig[0]);
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
- if (err)
- goto give_sigsegv;
-
- /* Set up to return from userspace. */
- restorer = &__kernel_rt_sigreturn;
- if (ka->sa.sa_flags & SA_RESTORER)
- restorer = ka->sa.sa_restorer;
- err |= __put_user(restorer, &frame->pretcode);
-
- /*
- * This is movl $,%eax ; int $0x80
- *
- * WE DO NOT USE IT ANY MORE! It's only left here for historical
- * reasons and because gdb uses it as a signature to notice
- * signal handler stack frames.
- */
- err |= __put_user(0xb8, (char __user *)(frame->retcode+0));
- err |= __put_user(__NR_rt_sigreturn, (int __user *)(frame->retcode+1));
- err |= __put_user(0x80cd, (short __user *)(frame->retcode+5));
-
- if (err)
- goto give_sigsegv;
-
- /* Set up registers for signal handler */
- regs->esp = (unsigned long) frame;
- regs->eip = (unsigned long) ka->sa.sa_handler;
- regs->eax = (unsigned long) usig;
- regs->edx = (unsigned long) &frame->info;
- regs->ecx = (unsigned long) &frame->uc;
-
- set_fs(USER_DS);
- regs->xds = __USER_DS;
- regs->xes = __USER_DS;
- regs->xss = __USER_DS;
- regs->xcs = __USER_CS;
-
- /*
- * Clear TF when entering the signal handler, but
- * notify any tracer that was single-stepping it.
- * The tracer may want to single-step inside the
- * handler too.
- */
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-
-#if DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->eip, frame->pretcode);
-#endif
-
- return;
-
-give_sigsegv:
- force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs * regs)
-{
- /* Are we from a system call? */
- if (regs->orig_eax >= 0) {
- /* If so, check system call restarting.. */
- switch (regs->eax) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->eax = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->eax = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->eax = regs->orig_eax;
- regs->eip -= 2;
- }
- }
-
- /*
- * If TF is set due to a debugger (PT_DTRACE), clear the TF flag so
- * that register information in the sigcontext is correct.
- */
- if (unlikely(regs->eflags & TF_MASK)
- && likely(current->ptrace & PT_DTRACE)) {
- current->ptrace &= ~PT_DTRACE;
- regs->eflags &= ~TF_MASK;
- }
-
- /* Set up the stack frame */
- if (ka->sa.sa_flags & SA_SIGINFO)
- setup_rt_frame(sig, ka, info, oldset, regs);
- else
- setup_frame(sig, ka, oldset, regs);
-
- if (!(ka->sa.sa_flags & SA_NODEFER)) {
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- }
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-int fastcall do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
- siginfo_t info;
- int signr;
- struct k_sigaction ka;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if ((regs->xcs & 2) != 2)
- return 1;
-
- if (current->flags & PF_FREEZE) {
- refrigerator(0);
- goto no_signal;
- }
-
- if (!oldset)
- oldset = ¤t->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Reenable any watchpoints before delivering the
- * signal to user space. The processor register will
- * have been cleared if the watchpoint triggered
- * inside the kernel.
- */
- if (unlikely(current->thread.debugreg[7])) {
- loaddebug(¤t->thread, 7);
- }
-
- /* Whee! Actually deliver the signal. */
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
-
- no_signal:
- /* Did we come from a system call? */
- if (regs->orig_eax >= 0) {
- /* Restart the system call - no handlers present */
- if (regs->eax == -ERESTARTNOHAND ||
- regs->eax == -ERESTARTSYS ||
- regs->eax == -ERESTARTNOINTR) {
- regs->eax = regs->orig_eax;
- regs->eip -= 2;
- }
- if (regs->eax == -ERESTART_RESTARTBLOCK){
- regs->eax = __NR_restart_syscall;
- regs->eip -= 2;
- }
- }
- return 0;
-}
-
-/*
- * notification of userspace execution resumption
- * - triggered by current->work.notify_resume
- */
-__attribute__((regparm(3)))
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset,
- __u32 thread_info_flags)
-{
- /* Pending single-step? */
- if (thread_info_flags & _TIF_SINGLESTEP) {
- regs->eflags |= TF_MASK;
- clear_thread_flag(TIF_SINGLESTEP);
- }
- /* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs,oldset);
-
- clear_thread_flag(TIF_IRET);
-}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/mach-xen/topology.c
--- a/linux-2.6-xen-sparse/arch/i386/mach-xen/topology.c Tue Jan 31
18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,97 +0,0 @@
-/*
- * arch/i386/mach-generic/topology.c - Populate driverfs with topology
information
- *
- * Written by: Matthew Dobson, IBM Corporation
- * Original Code: Paul Dorwin, IBM Corporation, Patrick Mochel, OSDL
- *
- * Copyright (C) 2002, IBM Corp.
- *
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Send feedback to <colpatch@xxxxxxxxxx>
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/nodemask.h>
-#include <asm/cpu.h>
-
-static struct i386_cpu cpu_devices[NR_CPUS];
-
-int arch_register_cpu(int num){
- struct node *parent = NULL;
-
-#ifdef CONFIG_NUMA
- int node = cpu_to_node(num);
- if (node_online(node))
- parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
- return register_cpu(&cpu_devices[num].cpu, num, parent);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-void arch_unregister_cpu(int num) {
- struct node *parent = NULL;
-
-#ifdef CONFIG_NUMA
- int node = cpu_to_node(num);
- if (node_online(node))
- parent = &node_devices[node].node;
-#endif /* CONFIG_NUMA */
-
- return unregister_cpu(&cpu_devices[num].cpu, parent);
-}
-EXPORT_SYMBOL(arch_register_cpu);
-EXPORT_SYMBOL(arch_unregister_cpu);
-#endif /*CONFIG_HOTPLUG_CPU*/
-
-
-
-#ifdef CONFIG_NUMA
-#include <linux/mmzone.h>
-#include <asm/node.h>
-
-struct i386_node node_devices[MAX_NUMNODES];
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_online_node(i)
- arch_register_node(i);
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
-#else /* !CONFIG_NUMA */
-
-static int __init topology_init(void)
-{
- int i;
-
- for_each_present_cpu(i)
- arch_register_cpu(i);
- return 0;
-}
-
-#endif /* CONFIG_NUMA */
-
-subsys_initcall(topology_init);
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/i386/pci/i386-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/pci/i386-xen.c Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,304 +0,0 @@
-/*
- * Low-Level PCI Access for i386 machines
- *
- * Copyright 1993, 1994 Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * Drew@xxxxxxxxxxxx
- * +1 (303) 786-7975
- *
- * Drew's work was sponsored by:
- * iX Multiuser Multitasking Magazine
- * Hannover, Germany
- * hm@xxxxx
- *
- * Copyright 1997--2000 Martin Mares <mj@xxxxxx>
- *
- * For more information, please consult the following manuals (look at
- * http://www.pcisig.com/ for how to get them):
- *
- * PCI BIOS Specification
- * PCI Local Bus Specification
- * PCI to PCI Bridge Specification
- * PCI System Design Guide
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/errno.h>
-
-#include "pci.h"
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void
-pcibios_align_resource(void *data, struct resource *res,
- unsigned long size, unsigned long align)
-{
- if (res->flags & IORESOURCE_IO) {
- unsigned long start = res->start;
-
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
-}
-
-
-/*
- * Handle resources of PCI devices. If the world were perfect, we could
- * just allocate all the resource regions and do nothing more. It isn't.
- * On the other hand, we cannot just re-allocate all devices, as it would
- * require us to know lots of host bridge internals. So we attempt to
- * keep as much of the original configuration as possible, but tweak it
- * when it's found to be wrong.
- *
- * Known BIOS problems we have to work around:
- * - I/O or memory regions not configured
- * - regions configured, but not enabled in the command register
- * - bogus I/O addresses above 64K used
- * - expansion ROMs left enabled (this may sound harmless, but given
- * the fact the PCI specs explicitly allow address decoders to be
- * shared between expansion ROMs and other resource regions, it's
- * at least dangerous)
- *
- * Our solution:
- * (1) Allocate resources for all buses behind PCI-to-PCI bridges.
- * This gives us fixed barriers on where we can allocate.
- * (2) Allocate resources for all enabled devices. If there is
- * a collision, just mark the resource as unallocated. Also
- * disable expansion ROMs during this step.
- * (3) Try to allocate resources for disabled devices. If the
- * resources were assigned correctly, everything goes well,
- * if they weren't, they won't disturb allocation of other
- * resources.
- * (4) Assign new addresses to resources which were either
- * not configured at all or misconfigured. If explicitly
- * requested by the user, configure expansion ROM address
- * as well.
- */
-
-static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
- struct pci_bus *bus;
- struct pci_dev *dev;
- int idx;
- struct resource *r, *pr;
-
- /* Depth-First Search on bus tree */
- list_for_each_entry(bus, bus_list, node) {
- if ((dev = bus->self)) {
- for (idx = PCI_BRIDGE_RESOURCES; idx <
PCI_NUM_RESOURCES; idx++) {
- r = &dev->resource[idx];
- if (!r->start)
- continue;
- pr = pci_find_parent_resource(dev, r);
- if (!pr || request_resource(pr, r) < 0)
- printk(KERN_ERR "PCI: Cannot allocate
resource region %d of bridge %s\n", idx, pci_name(dev));
- }
- }
- pcibios_allocate_bus_resources(&bus->children);
- }
-}
-
-static void __init pcibios_allocate_resources(int pass)
-{
- struct pci_dev *dev = NULL;
- int idx, disabled;
- u16 command;
- struct resource *r, *pr;
-
- for_each_pci_dev(dev) {
- pci_read_config_word(dev, PCI_COMMAND, &command);
- for(idx = 0; idx < 6; idx++) {
- r = &dev->resource[idx];
- if (r->parent) /* Already allocated */
- continue;
- if (!r->start) /* Address not assigned at all
*/
- continue;
- if (r->flags & IORESOURCE_IO)
- disabled = !(command & PCI_COMMAND_IO);
- else
- disabled = !(command & PCI_COMMAND_MEMORY);
- if (pass == disabled) {
- DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d,
p=%d)\n",
- r->start, r->end, r->flags, disabled, pass);
- pr = pci_find_parent_resource(dev, r);
- if (!pr || request_resource(pr, r) < 0) {
- printk(KERN_ERR "PCI: Cannot allocate
resource region %d of device %s\n", idx, pci_name(dev));
- /* We'll assign a new address later */
- r->end -= r->start;
- r->start = 0;
- }
- }
- }
- if (!pass) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
- /* Turn the ROM off, leave the resource region,
but keep it unregistered. */
- u32 reg;
- DBG("PCI: Switching off ROM of %s\n",
pci_name(dev));
- r->flags &= ~IORESOURCE_ROM_ENABLE;
- pci_read_config_dword(dev, dev->rom_base_reg,
®);
- pci_write_config_dword(dev, dev->rom_base_reg,
reg & ~PCI_ROM_ADDRESS_ENABLE);
- }
- }
- }
-}
-
-static int __init pcibios_assign_resources(void)
-{
- struct pci_dev *dev = NULL;
- int idx;
- struct resource *r;
-
- for_each_pci_dev(dev) {
- int class = dev->class >> 8;
-
- /* Don't touch classless devices and host bridges */
- if (!class || class == PCI_CLASS_BRIDGE_HOST)
- continue;
-
- for(idx=0; idx<6; idx++) {
- r = &dev->resource[idx];
-
- /*
- * Don't touch IDE controllers and I/O ports of video
cards!
- */
- if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) ||
- (class == PCI_CLASS_DISPLAY_VGA && (r->flags &
IORESOURCE_IO)))
- continue;
-
- /*
- * We shall assign a new address to this resource,
either because
- * the BIOS forgot to do so or because we have decided
the old
- * address was unusable for some reason.
- */
- if (!r->start && r->end)
- pci_assign_resource(dev, idx);
- }
-
- if (pci_probe & PCI_ASSIGN_ROMS) {
- r = &dev->resource[PCI_ROM_RESOURCE];
- r->end -= r->start;
- r->start = 0;
- if (r->end)
- pci_assign_resource(dev, PCI_ROM_RESOURCE);
- }
- }
- return 0;
-}
-
-void __init pcibios_resource_survey(void)
-{
- DBG("PCI: Allocating resources\n");
- pcibios_allocate_bus_resources(&pci_root_buses);
- pcibios_allocate_resources(0);
- pcibios_allocate_resources(1);
-}
-
-/**
- * called in fs_initcall (one below subsys_initcall),
- * give a chance for motherboard reserve resources
- */
-fs_initcall(pcibios_assign_resources);
-
-int pcibios_enable_resources(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
- /* Only set up the requested stuff */
- if (!(mask & (1<<idx)))
- continue;
-
- r = &dev->resource[idx];
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because
of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
- if (cmd != old_cmd) {
- printk("PCI: Enabling device %s (%04x -> %04x)\n",
pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as certain crappy BIOSes forget to set it properly.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
- enum pci_mmap_state mmap_state, int write_combine)
-{
- unsigned long prot;
-
- /* I/O space cannot be accessed via normal processor loads and
- * stores on this platform.
- */
- if (mmap_state == pci_mmap_io)
- return -EINVAL;
-
- /* Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
- */
- vma->vm_flags |= (VM_SHM | VM_LOCKED | VM_IO);
-
- prot = pgprot_val(vma->vm_page_prot);
- if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_PCD | _PAGE_PWT;
- vma->vm_page_prot = __pgprot(prot);
-
- /* Write-combine setting is ignored, it is changed via the mtrr
- * interfaces on this platform.
- */
- if (direct_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
- vma->vm_end - vma->vm_start,
- vma->vm_page_prot, DOMID_IO))
- return -EAGAIN;
-
- return 0;
-}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/i387.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/i387.c Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,155 +0,0 @@
-/*
- * linux/arch/x86_64/kernel/i387.c
- *
- * Copyright (C) 1994 Linus Torvalds
- * Copyright (C) 2002 Andi Kleen, SuSE Labs
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@xxxxxxxxxxx>, May 2000
- *
- * x86-64 rework 2002 Andi Kleen.
- * Does direct fxsave in and out of user space now for signal handlers.
- * All the FSAVE<->FXSAVE conversion code has been moved to the 32bit
emulation,
- * the 64bit user space sees a FXSAVE frame directly.
- */
-
-#include <linux/config.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <asm/processor.h>
-#include <asm/i387.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-
-unsigned int mxcsr_feature_mask = 0xffffffff;
-
-void mxcsr_feature_mask_init(void)
-{
- unsigned int mask;
- clts();
- memset(¤t->thread.i387.fxsave, 0, sizeof(struct
i387_fxsave_struct));
- asm volatile("fxsave %0" : : "m" (current->thread.i387.fxsave));
- mask = current->thread.i387.fxsave.mxcsr_mask;
- if (mask == 0) mask = 0x0000ffbf;
- mxcsr_feature_mask &= mask;
- stts();
-}
-
-/*
- * Called at bootup to set up the initial FPU state that is later cloned
- * into all processes.
- */
-void __cpuinit fpu_init(void)
-{
- unsigned long oldcr0 = read_cr0();
- extern void __bad_fxsave_alignment(void);
-
- if (offsetof(struct task_struct, thread.i387.fxsave) & 15)
- __bad_fxsave_alignment();
- set_in_cr4(X86_CR4_OSFXSR);
- set_in_cr4(X86_CR4_OSXMMEXCPT);
-
- write_cr0(oldcr0 & ~((1UL<<3)|(1UL<<2))); /* clear TS and EM */
-
- mxcsr_feature_mask_init();
- /* clean state in init */
- current_thread_info()->status = 0;
- clear_used_math();
-}
-
-void init_fpu(struct task_struct *child)
-{
- if (tsk_used_math(child)) {
- if (child == current)
- unlazy_fpu(child);
- return;
- }
- memset(&child->thread.i387.fxsave, 0, sizeof(struct
i387_fxsave_struct));
- child->thread.i387.fxsave.cwd = 0x37f;
- child->thread.i387.fxsave.mxcsr = 0x1f80;
- /* only the device not available exception or ptrace can call init_fpu
*/
- set_stopped_child_used_math(child);
-}
-
-/*
- * Signal frame handlers.
- */
-
-int save_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- {
- extern void bad_user_i387_struct(void);
- if (sizeof(struct user_i387_struct) !=
sizeof(tsk->thread.i387.fxsave))
- bad_user_i387_struct();
- }
-
- if ((unsigned long)buf % 16)
- printk("save_i387: bad fpstate %p\n",buf);
-
- if (!used_math())
- return 0;
- clear_used_math(); /* trigger finit */
- if (tsk->thread_info->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user
*)buf);
- if (err) return err;
- stts();
- } else {
- if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct i387_fxsave_struct)))
- return -1;
- }
- return 1;
-}
-
-/*
- * ptrace request handlers.
- */
-
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *tsk)
-{
- init_fpu(tsk);
- return __copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct user_i387_struct)) ? -EFAULT : 0;
-}
-
-int set_fpregs(struct task_struct *tsk, struct user_i387_struct __user *buf)
-{
- if (__copy_from_user(&tsk->thread.i387.fxsave, buf,
- sizeof(struct user_i387_struct)))
- return -EFAULT;
- return 0;
-}
-
-/*
- * FPU state for core dumps.
- */
-
-int dump_fpu( struct pt_regs *regs, struct user_i387_struct *fpu )
-{
- struct task_struct *tsk = current;
-
- if (!used_math())
- return 0;
-
- unlazy_fpu(tsk);
- memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct user_i387_struct));
- return 1;
-}
-
-int dump_task_fpu(struct task_struct *tsk, struct user_i387_struct *fpu)
-{
- int fpvalid = !!tsk_used_math(tsk);
-
- if (fpvalid) {
- if (tsk == current)
- unlazy_fpu(tsk);
- memcpy(fpu, &tsk->thread.i387.fxsave, sizeof(struct
user_i387_struct));
-}
- return fpvalid;
-}
diff -r 9a05a503897c -r 4b06313b9790
linux-2.6-xen-sparse/arch/x86_64/kernel/signal-xen.c
--- a/linux-2.6-xen-sparse/arch/x86_64/kernel/signal-xen.c Tue Jan 31
18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,493 +0,0 @@
-/*
- * linux/arch/x86_64/kernel/signal.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
- *
- * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson
- * 2000-06-20 Pentium III FXSR, SSE support by Gareth Hughes
- * 2000-2002 x86-64 support by Andi Kleen
- *
- * $Id: signal.c,v 1.18 2001/10/17 22:30:37 ak Exp $
- */
-
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/compiler.h>
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/i387.h>
-#include <asm/proto.h>
-#include <asm/ia32_unistd.h>
-
-/* #define DEBUG_SIG 1 */
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-void ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs);
-void ia32_setup_frame(int sig, struct k_sigaction *ka,
- sigset_t *set, struct pt_regs * regs);
-
-asmlinkage long
-sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, struct pt_regs
*regs)
-{
- sigset_t saveset, newset;
-
- /* XXX: Don't preclude handling different sized sigset_t's. */
- if (sigsetsize != sizeof(sigset_t))
- return -EINVAL;
-
- if (copy_from_user(&newset, unewset, sizeof(newset)))
- return -EFAULT;
- sigdelsetmask(&newset, ~_BLOCKABLE);
-
- spin_lock_irq(¤t->sighand->siglock);
- saveset = current->blocked;
- current->blocked = newset;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-#ifdef DEBUG_SIG
- printk("rt_sigsuspend savset(%lx) newset(%lx) regs(%p) rip(%lx)\n",
- saveset, newset, regs, regs->rip);
-#endif
- regs->rax = -EINTR;
- while (1) {
- current->state = TASK_INTERRUPTIBLE;
- schedule();
- if (do_signal(regs, &saveset))
- return -EINTR;
- }
-}
-
-asmlinkage long
-sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
- struct pt_regs *regs)
-{
- return do_sigaltstack(uss, uoss, regs->rsp);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct rt_sigframe
-{
- char __user *pretcode;
- struct ucontext uc;
- struct siginfo info;
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
unsigned long *prax)
-{
- unsigned int err = 0;
-
- /* Always make any pending restarted system calls return -EINTR */
- current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-#define COPY(x) err |= __get_user(regs->x, &sc->x)
-
- COPY(rdi); COPY(rsi); COPY(rbp); COPY(rsp); COPY(rbx);
- COPY(rdx); COPY(rcx); COPY(rip);
- COPY(r8);
- COPY(r9);
- COPY(r10);
- COPY(r11);
- COPY(r12);
- COPY(r13);
- COPY(r14);
- COPY(r15);
-
- {
- unsigned int tmpflags;
- err |= __get_user(tmpflags, &sc->eflags);
- regs->eflags = (regs->eflags & ~0x40DD5) | (tmpflags & 0x40DD5);
- regs->orig_rax = -1; /* disable syscall checks */
- }
-
- {
- struct _fpstate __user * buf;
- err |= __get_user(buf, &sc->fpstate);
-
- if (buf) {
- if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
- goto badframe;
- err |= restore_i387(buf);
- } else {
- struct task_struct *me = current;
- if (used_math()) {
- clear_fpu(me);
- clear_used_math();
- }
- }
- }
-
- err |= __get_user(*prax, &sc->rax);
- return err;
-
-badframe:
- return 1;
-}
-
-asmlinkage long sys_rt_sigreturn(struct pt_regs *regs)
-{
- struct rt_sigframe __user *frame;
- sigset_t set;
- unsigned long eax;
-
- frame = (struct rt_sigframe __user *)(regs->rsp - 8);
- if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) {
- goto badframe;
- }
- if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) {
- goto badframe;
- }
-
- sigdelsetmask(&set, ~_BLOCKABLE);
- spin_lock_irq(¤t->sighand->siglock);
- current->blocked = set;
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
-
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &eax))
- goto badframe;
-
-#ifdef DEBUG_SIG
- printk("%d sigreturn rip:%lx rsp:%lx frame:%p
rax:%lx\n",current->pid,regs.rip,regs.rsp,frame,eax);
-#endif
-
- if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->rsp) == -EFAULT)
- goto badframe;
-
- return eax;
-
-badframe:
- signal_fault(regs,frame,"sigreturn");
- return 0;
-}
-
-/*
- * Set up a signal frame.
- */
-
-static inline int
-setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, unsigned
long mask, struct task_struct *me)
-{
- int err = 0;
-
- err |= __put_user(0, &sc->gs);
- err |= __put_user(0, &sc->fs);
-
- err |= __put_user(regs->rdi, &sc->rdi);
- err |= __put_user(regs->rsi, &sc->rsi);
- err |= __put_user(regs->rbp, &sc->rbp);
- err |= __put_user(regs->rsp, &sc->rsp);
- err |= __put_user(regs->rbx, &sc->rbx);
- err |= __put_user(regs->rdx, &sc->rdx);
- err |= __put_user(regs->rcx, &sc->rcx);
- err |= __put_user(regs->rax, &sc->rax);
- err |= __put_user(regs->r8, &sc->r8);
- err |= __put_user(regs->r9, &sc->r9);
- err |= __put_user(regs->r10, &sc->r10);
- err |= __put_user(regs->r11, &sc->r11);
- err |= __put_user(regs->r12, &sc->r12);
- err |= __put_user(regs->r13, &sc->r13);
- err |= __put_user(regs->r14, &sc->r14);
- err |= __put_user(regs->r15, &sc->r15);
- err |= __put_user(me->thread.trap_no, &sc->trapno);
- err |= __put_user(me->thread.error_code, &sc->err);
- err |= __put_user(regs->rip, &sc->rip);
- err |= __put_user(regs->eflags, &sc->eflags);
- err |= __put_user(mask, &sc->oldmask);
- err |= __put_user(me->thread.cr2, &sc->cr2);
-
- return err;
-}
-
-/*
- * Determine which stack to use..
- */
-
-static void __user *
-get_stack(struct k_sigaction *ka, struct pt_regs *regs, unsigned long size)
-{
- unsigned long rsp;
-
- /* Default to using normal stack - redzone*/
- rsp = regs->rsp - 128;
-
- /* This is the X/Open sanctioned signal stack switching. */
- /* RED-PEN: redzone on that stack? */
- if (ka->sa.sa_flags & SA_ONSTACK) {
- if (sas_ss_flags(rsp) == 0)
- rsp = current->sas_ss_sp + current->sas_ss_size;
- }
-
- return (void __user *)round_down(rsp - size, 16);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
- sigset_t *set, struct pt_regs * regs)
-{
- struct rt_sigframe __user *frame;
- struct _fpstate __user *fp = NULL;
- int err = 0;
- struct task_struct *me = current;
-
- if (used_math()) {
- fp = get_stack(ka, regs, sizeof(struct _fpstate));
- frame = (void __user *)round_down(
- (unsigned long)fp - sizeof(struct rt_sigframe), 16) - 8;
-
- if (!access_ok(VERIFY_WRITE, fp, sizeof(struct _fpstate)))
- goto give_sigsegv;
-
- if (save_i387(fp) < 0)
- err |= -1;
- } else
- frame = get_stack(ka, regs, sizeof(struct rt_sigframe)) - 8;
-
- if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
- goto give_sigsegv;
-
- if (ka->sa.sa_flags & SA_SIGINFO) {
- err |= copy_siginfo_to_user(&frame->info, info);
- if (err)
- goto give_sigsegv;
- }
-
- /* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
- err |= __put_user(0, &frame->uc.uc_link);
- err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
- err |= __put_user(sas_ss_flags(regs->rsp),
- &frame->uc.uc_stack.ss_flags);
- err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size);
- err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], me);
- err |= __put_user(fp, &frame->uc.uc_mcontext.fpstate);
- if (sizeof(*set) == 16) {
- __put_user(set->sig[0], &frame->uc.uc_sigmask.sig[0]);
- __put_user(set->sig[1], &frame->uc.uc_sigmask.sig[1]);
- } else
- err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
- /* Set up to return from userspace. If provided, use a stub
- already in userspace. */
- /* x86-64 should always use SA_RESTORER. */
- if (ka->sa.sa_flags & SA_RESTORER) {
- err |= __put_user(ka->sa.sa_restorer, &frame->pretcode);
- } else {
- /* could use a vstub here */
- goto give_sigsegv;
- }
-
- if (err)
- goto give_sigsegv;
-
-#ifdef DEBUG_SIG
- printk("%d old rip %lx old rsp %lx old rax %lx\n",
current->pid,regs->rip,regs->rsp,regs->rax);
-#endif
-
- /* Set up registers for signal handler */
- {
- struct exec_domain *ed = current_thread_info()->exec_domain;
- if (unlikely(ed && ed->signal_invmap && sig < 32))
- sig = ed->signal_invmap[sig];
- }
- regs->rdi = sig;
- /* In case the signal handler was declared without prototypes */
- regs->rax = 0;
-
- /* This also works for non SA_SIGINFO handlers because they expect the
- next argument after the signal number on the stack. */
- regs->rsi = (unsigned long)&frame->info;
- regs->rdx = (unsigned long)&frame->uc;
- regs->rip = (unsigned long) ka->sa.sa_handler;
-
- regs->rsp = (unsigned long)frame;
-
- set_fs(USER_DS);
- regs->eflags &= ~TF_MASK;
- if (test_thread_flag(TIF_SINGLESTEP))
- ptrace_notify(SIGTRAP);
-#ifdef DEBUG_SIG
- printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
- current->comm, current->pid, frame, regs->rip, frame->pretcode);
-#endif
-
- return;
-
-give_sigsegv:
- force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
- sigset_t *oldset, struct pt_regs *regs)
-{
-#ifdef DEBUG_SIG
- printk("handle_signal pid:%d sig:%lu rip:%lx rsp:%lx regs=%p\n",
- current->pid, sig,
- regs->rip, regs->rsp, regs);
-#endif
-
- /* Are we from a system call? */
- if ((long)regs->orig_rax >= 0) {
- /* If so, check system call restarting.. */
- switch (regs->rax) {
- case -ERESTART_RESTARTBLOCK:
- case -ERESTARTNOHAND:
- regs->rax = -EINTR;
- break;
-
- case -ERESTARTSYS:
- if (!(ka->sa.sa_flags & SA_RESTART)) {
- regs->rax = -EINTR;
- break;
- }
- /* fallthrough */
- case -ERESTARTNOINTR:
- regs->rax = regs->orig_rax;
- regs->rip -= 2;
- break;
- }
- }
-
- /*
- * If TF is set due to a debugger (PT_DTRACE), clear the TF
- * flag so that register information in the sigcontext is
- * correct.
- */
- if (unlikely(regs->eflags & TF_MASK)) {
- if (likely(current->ptrace & PT_DTRACE)) {
- current->ptrace &= ~PT_DTRACE;
- regs->eflags &= ~TF_MASK;
- }
- }
-
-#ifdef CONFIG_IA32_EMULATION
- if (test_thread_flag(TIF_IA32)) {
- if (ka->sa.sa_flags & SA_SIGINFO)
- ia32_setup_rt_frame(sig, ka, info, oldset, regs);
- else
- ia32_setup_frame(sig, ka, oldset, regs);
- } else
-#endif
- setup_rt_frame(sig, ka, info, oldset, regs);
-
- if (!(ka->sa.sa_flags & SA_NODEFER)) {
- spin_lock_irq(¤t->sighand->siglock);
- sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask);
- sigaddset(¤t->blocked,sig);
- recalc_sigpending();
- spin_unlock_irq(¤t->sighand->siglock);
- }
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
- struct k_sigaction ka;
- siginfo_t info;
- int signr;
-
- /*
- * We want the common case to go fast, which
- * is why we may in certain cases get here from
- * kernel mode. Just return without doing anything
- * if so.
- */
- if ((regs->cs & 2) != 2)
- return 1;
-
- if (try_to_freeze(0))
- goto no_signal;
-
- if (!oldset)
- oldset = ¤t->blocked;
-
- signr = get_signal_to_deliver(&info, &ka, regs, NULL);
- if (signr > 0) {
- /* Reenable any watchpoints before delivering the
- * signal to user space. The processor register will
- * have been cleared if the watchpoint triggered
- * inside the kernel.
- */
- if (current->thread.debugreg7) {
- HYPERVISOR_set_debugreg(7,
- current->thread.debugreg7);
- }
-
- /* Whee! Actually deliver the signal. */
- handle_signal(signr, &info, &ka, oldset, regs);
- return 1;
- }
-
- no_signal:
- /* Did we come from a system call? */
- if ((long)regs->orig_rax >= 0) {
- /* Restart the system call - no handlers present */
- long res = regs->rax;
- if (res == -ERESTARTNOHAND ||
- res == -ERESTARTSYS ||
- res == -ERESTARTNOINTR) {
- regs->rax = regs->orig_rax;
- regs->rip -= 2;
- }
- if (regs->rax == (unsigned long)-ERESTART_RESTARTBLOCK) {
- regs->rax = test_thread_flag(TIF_IA32) ?
- __NR_ia32_restart_syscall :
- __NR_restart_syscall;
- regs->rip -= 2;
- }
- }
- return 0;
-}
-
-void do_notify_resume(struct pt_regs *regs, sigset_t *oldset, __u32
thread_info_flags)
-{
-#ifdef DEBUG_SIG
- printk("do_notify_resume flags:%x rip:%lx rsp:%lx caller:%lx
pending:%lx\n",
- thread_info_flags, regs->rip, regs->rsp,
__builtin_return_address(0),signal_pending(current));
-#endif
-
- /* Pending single-step? */
- if (thread_info_flags & _TIF_SINGLESTEP) {
- regs->eflags |= TF_MASK;
- clear_thread_flag(TIF_SINGLESTEP);
- }
-
- /* deal with pending signal delivery */
- if (thread_info_flags & _TIF_SIGPENDING)
- do_signal(regs,oldset);
-}
-
-void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
-{
- struct task_struct *me = current;
- if (exception_trace)
- printk("%s[%d] bad frame in %s frame:%p rip:%lx rsp:%lx
orax:%lx\n",
-
me->comm,me->pid,where,frame,regs->rip,regs->rsp,regs->orig_rax);
-
- force_sig(SIGSEGV, me);
-}
diff -r 9a05a503897c -r 4b06313b9790 linux-2.6-xen-sparse/include/linux/init.h
--- a/linux-2.6-xen-sparse/include/linux/init.h Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,262 +0,0 @@
-#ifndef _LINUX_INIT_H
-#define _LINUX_INIT_H
-
-#include <linux/config.h>
-#include <linux/compiler.h>
-
-/* These macros are used to mark some functions or
- * initialized data (doesn't apply to uninitialized data)
- * as `initialization' functions. The kernel can take this
- * as hint that the function is used only during the initialization
- * phase and free up used memory resources after
- *
- * Usage:
- * For functions:
- *
- * You should add __init immediately before the function name, like:
- *
- * static void __init initme(int x, int y)
- * {
- * extern int z; z = x * y;
- * }
- *
- * If the function has a prototype somewhere, you can also add
- * __init between closing brace of the prototype and semicolon:
- *
- * extern int initialize_foobar_device(int, int, int) __init;
- *
- * For initialized data:
- * You should insert __initdata between the variable name and equal
- * sign followed by value, e.g.:
- *
- * static int init_variable __initdata = 0;
- * static char linux_logo[] __initdata = { 0x32, 0x36, ... };
- *
- * Don't forget to initialize data not at file scope, i.e. within a function,
- * as gcc otherwise puts the data into the bss section and not into the init
- * section.
- *
- * Also note, that this data cannot be "const".
- */
-
-/* These are for everybody (although not all archs will actually
- discard it in modules) */
-#define __init __attribute__ ((__section__ (".init.text")))
-#define __initdata __attribute__ ((__section__ (".init.data")))
-#define __exitdata __attribute__ ((__section__(".exit.data")))
-#define __exit_call __attribute_used__ __attribute__ ((__section__
(".exitcall.exit")))
-
-#ifdef MODULE
-#define __exit __attribute__ ((__section__(".exit.text")))
-#else
-#define __exit __attribute_used__ __attribute__
((__section__(".exit.text")))
-#endif
-
-/* For assembly routines */
-#define __INIT .section ".init.text","ax"
-#define __FINIT .previous
-#define __INITDATA .section ".init.data","aw"
-
-#ifndef __ASSEMBLY__
-/*
- * Used for initialization calls..
- */
-typedef int (*initcall_t)(void);
-typedef void (*exitcall_t)(void);
-
-extern initcall_t __con_initcall_start[], __con_initcall_end[];
-extern initcall_t __security_initcall_start[], __security_initcall_end[];
-
-/* Defined in init/main.c */
-extern char saved_command_line[];
-#endif
-
-#ifndef MODULE
-
-#ifndef __ASSEMBLY__
-
-/* initcalls are now grouped by functionality into separate
- * subsections. Ordering inside the subsections is determined
- * by link order.
- * For backwards compatibility, initcall() puts the call in
- * the device init subsection.
- */
-
-#define __define_initcall(level,fn) \
- static initcall_t __initcall_##fn __attribute_used__ \
- __attribute__((__section__(".initcall" level ".init"))) = fn
-
-#define core_initcall(fn) __define_initcall("1",fn)
-#define postcore_initcall(fn) __define_initcall("2",fn)
-#define arch_initcall(fn) __define_initcall("3",fn)
-#define subsys_initcall(fn) __define_initcall("4",fn)
-#define fs_initcall(fn) __define_initcall("5",fn)
-#define device_initcall(fn) __define_initcall("6",fn)
-#define late_initcall(fn) __define_initcall("7",fn)
-
-#define __initcall(fn) device_initcall(fn)
-
-#define __exitcall(fn) \
- static exitcall_t __exitcall_##fn __exit_call = fn
-
-#define console_initcall(fn) \
- static initcall_t __initcall_##fn \
- __attribute_used__ __attribute__((__section__(".con_initcall.init")))=fn
-
-#define security_initcall(fn) \
- static initcall_t __initcall_##fn \
- __attribute_used__
__attribute__((__section__(".security_initcall.init"))) = fn
-
-struct obs_kernel_param {
- const char *str;
- int (*setup_func)(char *);
- int early;
-};
-
-/*
- * Only for really core code. See moduleparam.h for the normal way.
- *
- * Force the alignment so the compiler doesn't space elements of the
- * obs_kernel_param "array" too far apart in .init.setup.
- */
-#define __setup_param(str, unique_id, fn, early) \
- static char __setup_str_##unique_id[] __initdata = str; \
- static struct obs_kernel_param __setup_##unique_id \
- __attribute_used__ \
- __attribute__((__section__(".init.setup"))) \
- __attribute__((aligned((sizeof(long))))) \
- = { __setup_str_##unique_id, fn, early }
-
-#define __setup_null_param(str, unique_id) \
- __setup_param(str, unique_id, NULL, 0)
-
-#define __setup(str, fn) \
- __setup_param(str, fn, fn, 0)
-
-#define __obsolete_setup(str) \
- __setup_null_param(str, __LINE__)
-
-/* NOTE: fn is as per module_param, not __setup! Emits warning if fn
- * returns non-zero. */
-#define early_param(str, fn) \
- __setup_param(str, fn, fn, 1)
-
-/* Relies on saved_command_line being set */
-void __init parse_early_param(void);
-#endif /* __ASSEMBLY__ */
-
-/**
- * module_init() - driver initialization entry point
- * @x: function to be run at kernel boot time or module insertion
- *
- * module_init() will either be called during do_initcalls (if
- * builtin) or at module insertion time (if a module). There can only
- * be one per module.
- */
-#define module_init(x) __initcall(x);
-
-/**
- * module_exit() - driver exit entry point
- * @x: function to be run when driver is removed
- *
- * module_exit() will wrap the driver clean-up code
- * with cleanup_module() when used with rmmod when
- * the driver is a module. If the driver is statically
- * compiled into the kernel, module_exit() has no effect.
- * There can only be one per module.
- */
-#define module_exit(x) __exitcall(x);
-
-#else /* MODULE */
-
-/* Don't use these in modules, but some people do... */
-#define core_initcall(fn) module_init(fn)
-#define postcore_initcall(fn) module_init(fn)
-#define arch_initcall(fn) module_init(fn)
-#define subsys_initcall(fn) module_init(fn)
-#define fs_initcall(fn) module_init(fn)
-#define device_initcall(fn) module_init(fn)
-#define late_initcall(fn) module_init(fn)
-
-#define security_initcall(fn) module_init(fn)
-
-/* These macros create a dummy inline: gcc 2.9x does not count alias
- as usage, hence the `unused function' warning when __init functions
- are declared static. We use the dummy __*_module_inline functions
- both to kill the warning and check the type of the init/cleanup
- function. */
-
-/* Each module must use one module_init(), or one no_module_init */
-#define module_init(initfn) \
- static inline initcall_t __inittest(void) \
- { return initfn; } \
- int init_module(void) __attribute__((alias(#initfn)));
-
-/* This is only required if you want to be unloadable. */
-#define module_exit(exitfn) \
- static inline exitcall_t __exittest(void) \
- { return exitfn; } \
- void cleanup_module(void) __attribute__((alias(#exitfn)));
-
-#define __setup_param(str, unique_id, fn) /* nothing */
-#define __setup_null_param(str, unique_id) /* nothing */
-#define __setup(str, func) /* nothing */
-#define __obsolete_setup(str) /* nothing */
-#endif
-
-/* Data marked not to be saved by software_suspend() */
-#define __nosavedata __attribute__ ((__section__ (".data.nosave")))
-
-/* This means "can be init if no module support, otherwise module load
- may call it." */
-#ifdef CONFIG_MODULES
-#define __init_or_module
-#define __initdata_or_module
-#else
-#define __init_or_module __init
-#define __initdata_or_module __initdata
-#endif /*CONFIG_MODULES*/
-
-#ifdef CONFIG_HOTPLUG
-#define __devinit
-#define __devinitdata
-#define __devexit
-#define __devexitdata
-#else
-#define __devinit __init
-#define __devinitdata __initdata
-#define __devexit __exit
-#define __devexitdata __exitdata
-#endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define __cpuinit
-#define __cpuinitdata
-#define __cpuexit
-#define __cpuexitdata
-#else
-#define __cpuinit __init
-#define __cpuinitdata __initdata
-#define __cpuexit __exit
-#define __cpuexitdata __exitdata
-#endif
-
-/* Functions marked as __devexit may be discarded at kernel link time,
depending
- on config options. Newer versions of binutils detect references from
- retained sections to discarded sections and flag an error. Pointers to
- __devexit functions must use __devexit_p(function_name), the wrapper will
- insert either the function_name or NULL, depending on the config options.
- */
-#if defined(MODULE) || defined(CONFIG_HOTPLUG)
-#define __devexit_p(x) x
-#else
-#define __devexit_p(x) NULL
-#endif
-
-#ifdef MODULE
-#define __exit_p(x) x
-#else
-#define __exit_p(x) NULL
-#endif
-
-#endif /* _LINUX_INIT_H */
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/2.6.12.6.patch
--- a/patches/linux-2.6.12/2.6.12.6.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,1738 +0,0 @@
-diff --git a/Makefile b/Makefile
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2
- PATCHLEVEL = 6
- SUBLEVEL = 12
--EXTRAVERSION =
-+EXTRAVERSION = .6
- NAME=Woozy Numbat
-
- # *DOCUMENTATION*
-@@ -1149,7 +1149,7 @@ endif # KBUILD_EXTMOD
- #(which is the most common case IMHO) to avoid unneeded clutter in the big
tags file.
- #Adding $(srctree) adds about 20M on i386 to the size of the output file!
-
--ifeq ($(KBUILD_OUTPUT),)
-+ifeq ($(src),$(obj))
- __srctree =
- else
- __srctree = $(srctree)/
-diff --git a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
---- a/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
-+++ b/arch/i386/kernel/cpu/cpufreq/powernow-k8.c
-@@ -44,7 +44,7 @@
-
- #define PFX "powernow-k8: "
- #define BFX PFX "BIOS error: "
--#define VERSION "version 1.40.2"
-+#define VERSION "version 1.40.4"
- #include "powernow-k8.h"
-
- /* serialize freq changes */
-@@ -978,7 +978,7 @@ static int __init powernowk8_cpu_init(st
- {
- struct powernow_k8_data *data;
- cpumask_t oldmask = CPU_MASK_ALL;
-- int rc;
-+ int rc, i;
-
- if (!check_supported_cpu(pol->cpu))
- return -ENODEV;
-@@ -1064,7 +1064,9 @@ static int __init powernowk8_cpu_init(st
- printk("cpu_init done, current fid 0x%x, vid 0x%x\n",
- data->currfid, data->currvid);
-
-- powernow_data[pol->cpu] = data;
-+ for_each_cpu_mask(i, cpu_core_map[pol->cpu]) {
-+ powernow_data[i] = data;
-+ }
-
- return 0;
-
-diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c
---- a/arch/i386/kernel/process.c
-+++ b/arch/i386/kernel/process.c
-@@ -827,6 +827,8 @@ asmlinkage int sys_get_thread_area(struc
- if (idx < GDT_ENTRY_TLS_MIN || idx > GDT_ENTRY_TLS_MAX)
- return -EINVAL;
-
-+ memset(&info, 0, sizeof(info));
-+
- desc = current->thread.tls_array + idx - GDT_ENTRY_TLS_MIN;
-
- info.entry_number = idx;
-diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c
---- a/arch/ia64/kernel/ptrace.c
-+++ b/arch/ia64/kernel/ptrace.c
-@@ -945,6 +945,13 @@ access_uarea (struct task_struct *child,
- *data = (pt->cr_ipsr & IPSR_MASK);
- return 0;
-
-+ case PT_AR_RSC:
-+ if (write_access)
-+ pt->ar_rsc = *data | (3 << 2); /* force PL3 */
-+ else
-+ *data = pt->ar_rsc;
-+ return 0;
-+
- case PT_AR_RNAT:
- urbs_end = ia64_get_user_rbs_end(child, pt, NULL);
- rnat_addr = (long) ia64_rse_rnat_addr((long *)
-@@ -996,9 +1003,6 @@ access_uarea (struct task_struct *child,
- case PT_AR_BSPSTORE:
- ptr = pt_reg_addr(pt, ar_bspstore);
- break;
-- case PT_AR_RSC:
-- ptr = pt_reg_addr(pt, ar_rsc);
-- break;
- case PT_AR_UNAT:
- ptr = pt_reg_addr(pt, ar_unat);
- break;
-@@ -1234,7 +1238,7 @@ ptrace_getregs (struct task_struct *chil
- static long
- ptrace_setregs (struct task_struct *child, struct pt_all_user_regs __user
*ppr)
- {
-- unsigned long psr, ec, lc, rnat, bsp, cfm, nat_bits, val = 0;
-+ unsigned long psr, rsc, ec, lc, rnat, bsp, cfm, nat_bits, val = 0;
- struct unw_frame_info info;
- struct switch_stack *sw;
- struct ia64_fpreg fpval;
-@@ -1267,7 +1271,7 @@ ptrace_setregs (struct task_struct *chil
- /* app regs */
-
- retval |= __get_user(pt->ar_pfs, &ppr->ar[PT_AUR_PFS]);
-- retval |= __get_user(pt->ar_rsc, &ppr->ar[PT_AUR_RSC]);
-+ retval |= __get_user(rsc, &ppr->ar[PT_AUR_RSC]);
- retval |= __get_user(pt->ar_bspstore, &ppr->ar[PT_AUR_BSPSTORE]);
- retval |= __get_user(pt->ar_unat, &ppr->ar[PT_AUR_UNAT]);
- retval |= __get_user(pt->ar_ccv, &ppr->ar[PT_AUR_CCV]);
-@@ -1365,6 +1369,7 @@ ptrace_setregs (struct task_struct *chil
- retval |= __get_user(nat_bits, &ppr->nat);
-
- retval |= access_uarea(child, PT_CR_IPSR, &psr, 1);
-+ retval |= access_uarea(child, PT_AR_RSC, &rsc, 1);
- retval |= access_uarea(child, PT_AR_EC, &ec, 1);
- retval |= access_uarea(child, PT_AR_LC, &lc, 1);
- retval |= access_uarea(child, PT_AR_RNAT, &rnat, 1);
-diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
---- a/arch/ia64/kernel/signal.c
-+++ b/arch/ia64/kernel/signal.c
-@@ -94,7 +94,7 @@ sys_sigaltstack (const stack_t __user *u
- static long
- restore_sigcontext (struct sigcontext __user *sc, struct sigscratch *scr)
- {
-- unsigned long ip, flags, nat, um, cfm;
-+ unsigned long ip, flags, nat, um, cfm, rsc;
- long err;
-
- /* Always make any pending restarted system calls return -EINTR */
-@@ -106,7 +106,7 @@ restore_sigcontext (struct sigcontext __
- err |= __get_user(ip, &sc->sc_ip); /* instruction
pointer */
- err |= __get_user(cfm, &sc->sc_cfm);
- err |= __get_user(um, &sc->sc_um); /* user mask */
-- err |= __get_user(scr->pt.ar_rsc, &sc->sc_ar_rsc);
-+ err |= __get_user(rsc, &sc->sc_ar_rsc);
- err |= __get_user(scr->pt.ar_unat, &sc->sc_ar_unat);
- err |= __get_user(scr->pt.ar_fpsr, &sc->sc_ar_fpsr);
- err |= __get_user(scr->pt.ar_pfs, &sc->sc_ar_pfs);
-@@ -119,6 +119,7 @@ restore_sigcontext (struct sigcontext __
- err |= __copy_from_user(&scr->pt.r15, &sc->sc_gr[15], 8); /* r15
*/
-
- scr->pt.cr_ifs = cfm | (1UL << 63);
-+ scr->pt.ar_rsc = rsc | (3 << 2); /* force PL3 */
-
- /* establish new instruction pointer: */
- scr->pt.cr_iip = ip & ~0x3UL;
-diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
---- a/arch/ppc/kernel/time.c
-+++ b/arch/ppc/kernel/time.c
-@@ -89,6 +89,9 @@ unsigned long tb_to_ns_scale;
-
- extern unsigned long wall_jiffies;
-
-+/* used for timezone offset */
-+static long timezone_offset;
-+
- DEFINE_SPINLOCK(rtc_lock);
-
- EXPORT_SYMBOL(rtc_lock);
-@@ -170,7 +173,7 @@ void timer_interrupt(struct pt_regs * re
- xtime.tv_sec - last_rtc_update >= 659 &&
- abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) <
500000/HZ &&
- jiffies - wall_jiffies == 1) {
-- if (ppc_md.set_rtc_time(xtime.tv_sec+1 + time_offset)
== 0)
-+ if (ppc_md.set_rtc_time(xtime.tv_sec+1 +
timezone_offset) == 0)
- last_rtc_update = xtime.tv_sec+1;
- else
- /* Try again one minute later */
-@@ -286,7 +289,7 @@ void __init time_init(void)
- unsigned old_stamp, stamp, elapsed;
-
- if (ppc_md.time_init != NULL)
-- time_offset = ppc_md.time_init();
-+ timezone_offset = ppc_md.time_init();
-
- if (__USE_RTC()) {
- /* 601 processor: dec counts down by 128 every 128ns */
-@@ -331,10 +334,10 @@ void __init time_init(void)
- set_dec(tb_ticks_per_jiffy);
-
- /* If platform provided a timezone (pmac), we correct the time */
-- if (time_offset) {
-- sys_tz.tz_minuteswest = -time_offset / 60;
-+ if (timezone_offset) {
-+ sys_tz.tz_minuteswest = -timezone_offset / 60;
- sys_tz.tz_dsttime = 0;
-- xtime.tv_sec -= time_offset;
-+ xtime.tv_sec -= timezone_offset;
- }
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-diff --git a/arch/ppc64/boot/zlib.c b/arch/ppc64/boot/zlib.c
---- a/arch/ppc64/boot/zlib.c
-+++ b/arch/ppc64/boot/zlib.c
-@@ -1307,7 +1307,7 @@ local int huft_build(
- {
- *t = (inflate_huft *)Z_NULL;
- *m = 0;
-- return Z_OK;
-+ return Z_DATA_ERROR;
- }
-
-
-@@ -1351,6 +1351,7 @@ local int huft_build(
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
-+ n = x[g]; /* set n to length of v */
-
-
- /* Generate the Huffman codes and for each, make the table entries */
-diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
---- a/arch/um/kernel/process.c
-+++ b/arch/um/kernel/process.c
-@@ -130,7 +130,7 @@ int start_fork_tramp(void *thread_arg, u
- return(arg.pid);
- }
-
--static int ptrace_child(void)
-+static int ptrace_child(void *arg)
- {
- int ret;
- int pid = os_getpid(), ppid = getppid();
-@@ -159,16 +159,20 @@ static int ptrace_child(void)
- _exit(ret);
- }
-
--static int start_ptraced_child(void)
-+static int start_ptraced_child(void **stack_out)
- {
-+ void *stack;
-+ unsigned long sp;
- int pid, n, status;
-
-- pid = fork();
-- if(pid == 0)
-- ptrace_child();
--
-+ stack = mmap(NULL, PAGE_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC,
-+ MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
-+ if(stack == MAP_FAILED)
-+ panic("check_ptrace : mmap failed, errno = %d", errno);
-+ sp = (unsigned long) stack + PAGE_SIZE - sizeof(void *);
-+ pid = clone(ptrace_child, (void *) sp, SIGCHLD, NULL);
- if(pid < 0)
-- panic("check_ptrace : fork failed, errno = %d", errno);
-+ panic("check_ptrace : clone failed, errno = %d", errno);
- CATCH_EINTR(n = waitpid(pid, &status, WUNTRACED));
- if(n < 0)
- panic("check_ptrace : wait failed, errno = %d", errno);
-@@ -176,6 +180,7 @@ static int start_ptraced_child(void)
- panic("check_ptrace : expected SIGSTOP, got status = %d",
- status);
-
-+ *stack_out = stack;
- return(pid);
- }
-
-@@ -183,12 +188,12 @@ static int start_ptraced_child(void)
- * just avoid using sysemu, not panic, but only if SYSEMU features are broken.
- * So only for SYSEMU features we test mustpanic, while normal host features
- * must work anyway!*/
--static int stop_ptraced_child(int pid, int exitcode, int mustexit)
-+static int stop_ptraced_child(int pid, void *stack, int exitcode, int
mustpanic)
- {
- int status, n, ret = 0;
-
- if(ptrace(PTRACE_CONT, pid, 0, 0) < 0)
-- panic("stop_ptraced_child : ptrace failed, errno = %d", errno);
-+ panic("check_ptrace : ptrace failed, errno = %d", errno);
- CATCH_EINTR(n = waitpid(pid, &status, 0));
- if(!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
- int exit_with = WEXITSTATUS(status);
-@@ -199,13 +204,15 @@ static int stop_ptraced_child(int pid, i
- printk("check_ptrace : child exited with exitcode %d, while "
- "expecting %d; status 0x%x", exit_with,
- exitcode, status);
-- if (mustexit)
-+ if (mustpanic)
- panic("\n");
- else
- printk("\n");
- ret = -1;
- }
-
-+ if(munmap(stack, PAGE_SIZE) < 0)
-+ panic("check_ptrace : munmap failed, errno = %d", errno);
- return ret;
- }
-
-@@ -227,11 +234,12 @@ __uml_setup("nosysemu", nosysemu_cmd_par
-
- static void __init check_sysemu(void)
- {
-+ void *stack;
- int pid, syscall, n, status, count=0;
-
- printk("Checking syscall emulation patch for ptrace...");
- sysemu_supported = 0;
-- pid = start_ptraced_child();
-+ pid = start_ptraced_child(&stack);
-
- if(ptrace(PTRACE_SYSEMU, pid, 0, 0) < 0)
- goto fail;
-@@ -249,7 +257,7 @@ static void __init check_sysemu(void)
- panic("check_sysemu : failed to modify system "
- "call return, errno = %d", errno);
-
-- if (stop_ptraced_child(pid, 0, 0) < 0)
-+ if (stop_ptraced_child(pid, stack, 0, 0) < 0)
- goto fail_stopped;
-
- sysemu_supported = 1;
-@@ -257,7 +265,7 @@ static void __init check_sysemu(void)
- set_using_sysemu(!force_sysemu_disabled);
-
- printk("Checking advanced syscall emulation patch for ptrace...");
-- pid = start_ptraced_child();
-+ pid = start_ptraced_child(&stack);
- while(1){
- count++;
- if(ptrace(PTRACE_SYSEMU_SINGLESTEP, pid, 0, 0) < 0)
-@@ -282,7 +290,7 @@ static void __init check_sysemu(void)
- break;
- }
- }
-- if (stop_ptraced_child(pid, 0, 0) < 0)
-+ if (stop_ptraced_child(pid, stack, 0, 0) < 0)
- goto fail_stopped;
-
- sysemu_supported = 2;
-@@ -293,17 +301,18 @@ static void __init check_sysemu(void)
- return;
-
- fail:
-- stop_ptraced_child(pid, 1, 0);
-+ stop_ptraced_child(pid, stack, 1, 0);
- fail_stopped:
- printk("missing\n");
- }
-
- void __init check_ptrace(void)
- {
-+ void *stack;
- int pid, syscall, n, status;
-
- printk("Checking that ptrace can change system call numbers...");
-- pid = start_ptraced_child();
-+ pid = start_ptraced_child(&stack);
-
- if (ptrace(PTRACE_OLDSETOPTIONS, pid, 0, (void *)PTRACE_O_TRACESYSGOOD)
< 0)
- panic("check_ptrace: PTRACE_SETOPTIONS failed, errno = %d",
errno);
-@@ -330,7 +339,7 @@ void __init check_ptrace(void)
- break;
- }
- }
-- stop_ptraced_child(pid, 0, 1);
-+ stop_ptraced_child(pid, stack, 0, 1);
- printk("OK\n");
- check_sysemu();
- }
-@@ -362,10 +371,11 @@ void forward_pending_sigio(int target)
- static inline int check_skas3_ptrace_support(void)
- {
- struct ptrace_faultinfo fi;
-+ void *stack;
- int pid, n, ret = 1;
-
- printf("Checking for the skas3 patch in the host...");
-- pid = start_ptraced_child();
-+ pid = start_ptraced_child(&stack);
-
- n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
- if (n < 0) {
-@@ -380,7 +390,7 @@ static inline int check_skas3_ptrace_sup
- }
-
- init_registers(pid);
-- stop_ptraced_child(pid, 1, 1);
-+ stop_ptraced_child(pid, stack, 1, 1);
-
- return(ret);
- }
-diff --git a/arch/x86_64/ia32/syscall32.c b/arch/x86_64/ia32/syscall32.c
---- a/arch/x86_64/ia32/syscall32.c
-+++ b/arch/x86_64/ia32/syscall32.c
-@@ -57,6 +57,7 @@ int syscall32_setup_pages(struct linux_b
- int npages = (VSYSCALL32_END - VSYSCALL32_BASE) >> PAGE_SHIFT;
- struct vm_area_struct *vma;
- struct mm_struct *mm = current->mm;
-+ int ret;
-
- vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL);
- if (!vma)
-@@ -78,7 +79,11 @@ int syscall32_setup_pages(struct linux_b
- vma->vm_mm = mm;
-
- down_write(&mm->mmap_sem);
-- insert_vm_struct(mm, vma);
-+ if ((ret = insert_vm_struct(mm, vma))) {
-+ up_write(&mm->mmap_sem);
-+ kmem_cache_free(vm_area_cachep, vma);
-+ return ret;
-+ }
- mm->total_vm += npages;
- up_write(&mm->mmap_sem);
- return 0;
-diff --git a/arch/x86_64/kernel/setup.c b/arch/x86_64/kernel/setup.c
---- a/arch/x86_64/kernel/setup.c
-+++ b/arch/x86_64/kernel/setup.c
-@@ -729,8 +729,6 @@ static void __init amd_detect_cmp(struct
- int cpu = smp_processor_id();
- int node = 0;
- unsigned bits;
-- if (c->x86_num_cores == 1)
-- return;
-
- bits = 0;
- while ((1 << bits) < c->x86_num_cores)
-diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c
---- a/arch/x86_64/kernel/smp.c
-+++ b/arch/x86_64/kernel/smp.c
-@@ -284,6 +284,71 @@ struct call_data_struct {
- static struct call_data_struct * call_data;
-
- /*
-+ * this function sends a 'generic call function' IPI to one other CPU
-+ * in the system.
-+ */
-+static void __smp_call_function_single (int cpu, void (*func) (void *info),
void *info,
-+ int nonatomic, int wait)
-+{
-+ struct call_data_struct data;
-+ int cpus = 1;
-+
-+ data.func = func;
-+ data.info = info;
-+ atomic_set(&data.started, 0);
-+ data.wait = wait;
-+ if (wait)
-+ atomic_set(&data.finished, 0);
-+
-+ call_data = &data;
-+ wmb();
-+ /* Send a message to all other CPUs and wait for them to respond */
-+ send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_VECTOR);
-+
-+ /* Wait for response */
-+ while (atomic_read(&data.started) != cpus)
-+ cpu_relax();
-+
-+ if (!wait)
-+ return;
-+
-+ while (atomic_read(&data.finished) != cpus)
-+ cpu_relax();
-+}
-+
-+/*
-+ * Run a function on another CPU
-+ * <func> The function to run. This must be fast and non-blocking.
-+ * <info> An arbitrary pointer to pass to the function.
-+ * <nonatomic> Currently unused.
-+ * <wait> If true, wait until function has completed on other CPUs.
-+ * [RETURNS] 0 on success, else a negative status code.
-+ *
-+ * Does not return until the remote CPU is nearly ready to execute <func>
-+ * or is or has executed.
-+ */
-+
-+int smp_call_function_single (int cpu, void (*func) (void *info), void *info,
-+ int nonatomic, int wait)
-+{
-+
-+ int me = get_cpu(); /* prevent preemption and reschedule on another
processor */
-+
-+ if (cpu == me) {
-+ printk("%s: trying to call self\n", __func__);
-+ put_cpu();
-+ return -EBUSY;
-+ }
-+ spin_lock_bh(&call_lock);
-+
-+ __smp_call_function_single(cpu, func,info,nonatomic,wait);
-+
-+ spin_unlock_bh(&call_lock);
-+ put_cpu();
-+ return 0;
-+}
-+
-+/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c
---- a/arch/x86_64/kernel/smpboot.c
-+++ b/arch/x86_64/kernel/smpboot.c
-@@ -202,9 +202,6 @@ static __cpuinit void sync_master(void *
- {
- unsigned long flags, i;
-
-- if (smp_processor_id() != boot_cpu_id)
-- return;
--
- go[MASTER] = 0;
-
- local_irq_save(flags);
-@@ -253,7 +250,7 @@ get_delta(long *rt, long *master)
- return tcenter - best_tm;
- }
-
--static __cpuinit void sync_tsc(void)
-+static __cpuinit void sync_tsc(unsigned int master)
- {
- int i, done = 0;
- long delta, adj, adjust_latency = 0;
-@@ -267,9 +264,17 @@ static __cpuinit void sync_tsc(void)
- } t[NUM_ROUNDS] __cpuinitdata;
- #endif
-
-+ printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n",
-+ smp_processor_id(), master);
-+
- go[MASTER] = 1;
-
-- smp_call_function(sync_master, NULL, 1, 0);
-+ /* It is dangerous to broadcast IPI as cpus are coming up,
-+ * as they may not be ready to accept them. So since
-+ * we only need to send the ipi to the boot cpu direct
-+ * the message, and avoid the race.
-+ */
-+ smp_call_function_single(master, sync_master, NULL, 1, 0);
-
- while (go[MASTER]) /* wait for master to be ready */
- no_cpu_relax();
-@@ -313,16 +318,14 @@ static __cpuinit void sync_tsc(void)
- printk(KERN_INFO
- "CPU %d: synchronized TSC with CPU %u (last diff %ld cycles, "
- "maxerr %lu cycles)\n",
-- smp_processor_id(), boot_cpu_id, delta, rt);
-+ smp_processor_id(), master, delta, rt);
- }
-
- static void __cpuinit tsc_sync_wait(void)
- {
- if (notscsync || !cpu_has_tsc)
- return;
-- printk(KERN_INFO "CPU %d: Syncing TSC to CPU %u.\n", smp_processor_id(),
-- boot_cpu_id);
-- sync_tsc();
-+ sync_tsc(0);
- }
-
- static __init int notscsync_setup(char *s)
-diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
---- a/drivers/acpi/pci_irq.c
-+++ b/drivers/acpi/pci_irq.c
-@@ -433,8 +433,9 @@ acpi_pci_irq_enable (
- printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI",
- pci_name(dev), ('A' + pin));
- /* Interrupt Line values above 0xF are forbidden */
-- if (dev->irq >= 0 && (dev->irq <= 0xF)) {
-+ if (dev->irq > 0 && (dev->irq <= 0xF)) {
- printk(" - using IRQ %d\n", dev->irq);
-+ acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
- return_VALUE(0);
- }
- else {
-diff --git a/drivers/char/rocket.c b/drivers/char/rocket.c
---- a/drivers/char/rocket.c
-+++ b/drivers/char/rocket.c
-@@ -277,7 +277,7 @@ static void rp_do_receive(struct r_port
- ToRecv = space;
-
- if (ToRecv <= 0)
-- return;
-+ goto done;
-
- /*
- * if status indicates there are errored characters in the
-@@ -359,6 +359,7 @@ static void rp_do_receive(struct r_port
- }
- /* Push the data up to the tty layer */
- ld->receive_buf(tty, tty->flip.char_buf, tty->flip.flag_buf, count);
-+done:
- tty_ldisc_deref(ld);
- }
-
-diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
---- a/drivers/char/tpm/tpm.c
-+++ b/drivers/char/tpm/tpm.c
-@@ -32,12 +32,6 @@
-
- #define TPM_BUFSIZE 2048
-
--/* PCI configuration addresses */
--#define PCI_GEN_PMCON_1 0xA0
--#define PCI_GEN1_DEC 0xE4
--#define PCI_LPC_EN 0xE6
--#define PCI_GEN2_DEC 0xEC
--
- static LIST_HEAD(tpm_chip_list);
- static DEFINE_SPINLOCK(driver_lock);
- static int dev_mask[32];
-@@ -61,72 +55,6 @@ void tpm_time_expired(unsigned long ptr)
- EXPORT_SYMBOL_GPL(tpm_time_expired);
-
- /*
-- * Initialize the LPC bus and enable the TPM ports
-- */
--int tpm_lpc_bus_init(struct pci_dev *pci_dev, u16 base)
--{
-- u32 lpcenable, tmp;
-- int is_lpcm = 0;
--
-- switch (pci_dev->vendor) {
-- case PCI_VENDOR_ID_INTEL:
-- switch (pci_dev->device) {
-- case PCI_DEVICE_ID_INTEL_82801CA_12:
-- case PCI_DEVICE_ID_INTEL_82801DB_12:
-- is_lpcm = 1;
-- break;
-- }
-- /* init ICH (enable LPC) */
-- pci_read_config_dword(pci_dev, PCI_GEN1_DEC, &lpcenable);
-- lpcenable |= 0x20000000;
-- pci_write_config_dword(pci_dev, PCI_GEN1_DEC, lpcenable);
--
-- if (is_lpcm) {
-- pci_read_config_dword(pci_dev, PCI_GEN1_DEC,
-- &lpcenable);
-- if ((lpcenable & 0x20000000) == 0) {
-- dev_err(&pci_dev->dev,
-- "cannot enable LPC\n");
-- return -ENODEV;
-- }
-- }
--
-- /* initialize TPM registers */
-- pci_read_config_dword(pci_dev, PCI_GEN2_DEC, &tmp);
--
-- if (!is_lpcm)
-- tmp = (tmp & 0xFFFF0000) | (base & 0xFFF0);
-- else
-- tmp =
-- (tmp & 0xFFFF0000) | (base & 0xFFF0) |
-- 0x00000001;
--
-- pci_write_config_dword(pci_dev, PCI_GEN2_DEC, tmp);
--
-- if (is_lpcm) {
-- pci_read_config_dword(pci_dev, PCI_GEN_PMCON_1,
-- &tmp);
-- tmp |= 0x00000004; /* enable CLKRUN */
-- pci_write_config_dword(pci_dev, PCI_GEN_PMCON_1,
-- tmp);
-- }
-- tpm_write_index(0x0D, 0x55); /* unlock 4F */
-- tpm_write_index(0x0A, 0x00); /* int disable */
-- tpm_write_index(0x08, base); /* base addr lo */
-- tpm_write_index(0x09, (base & 0xFF00) >> 8); /* base addr hi
*/
-- tpm_write_index(0x0D, 0xAA); /* lock 4F */
-- break;
-- case PCI_VENDOR_ID_AMD:
-- /* nothing yet */
-- break;
-- }
--
-- return 0;
--}
--
--EXPORT_SYMBOL_GPL(tpm_lpc_bus_init);
--
--/*
- * Internal kernel interface to transmit TPM commands
- */
- static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf,
-@@ -590,10 +518,6 @@ int tpm_pm_resume(struct pci_dev *pci_de
- if (chip == NULL)
- return -ENODEV;
-
-- spin_lock(&driver_lock);
-- tpm_lpc_bus_init(pci_dev, chip->vendor->base);
-- spin_unlock(&driver_lock);
--
- return 0;
- }
-
-diff --git a/drivers/char/tpm/tpm.h b/drivers/char/tpm/tpm.h
---- a/drivers/char/tpm/tpm.h
-+++ b/drivers/char/tpm/tpm.h
-@@ -79,8 +79,6 @@ static inline void tpm_write_index(int i
- }
-
- extern void tpm_time_expired(unsigned long);
--extern int tpm_lpc_bus_init(struct pci_dev *, u16);
--
- extern int tpm_register_hardware(struct pci_dev *,
- struct tpm_vendor_specific *);
- extern int tpm_open(struct inode *, struct file *);
-diff --git a/drivers/char/tpm/tpm_atmel.c b/drivers/char/tpm/tpm_atmel.c
---- a/drivers/char/tpm/tpm_atmel.c
-+++ b/drivers/char/tpm/tpm_atmel.c
-@@ -22,7 +22,10 @@
- #include "tpm.h"
-
- /* Atmel definitions */
--#define TPM_ATML_BASE 0x400
-+enum tpm_atmel_addr {
-+ TPM_ATMEL_BASE_ADDR_LO = 0x08,
-+ TPM_ATMEL_BASE_ADDR_HI = 0x09
-+};
-
- /* write status bits */
- #define ATML_STATUS_ABORT 0x01
-@@ -127,7 +130,6 @@ static struct tpm_vendor_specific tpm_at
- .cancel = tpm_atml_cancel,
- .req_complete_mask = ATML_STATUS_BUSY | ATML_STATUS_DATA_AVAIL,
- .req_complete_val = ATML_STATUS_DATA_AVAIL,
-- .base = TPM_ATML_BASE,
- .miscdev = { .fops = &atmel_ops, },
- };
-
-@@ -136,14 +138,16 @@ static int __devinit tpm_atml_init(struc
- {
- u8 version[4];
- int rc = 0;
-+ int lo, hi;
-
- if (pci_enable_device(pci_dev))
- return -EIO;
-
-- if (tpm_lpc_bus_init(pci_dev, TPM_ATML_BASE)) {
-- rc = -ENODEV;
-- goto out_err;
-- }
-+ lo = tpm_read_index( TPM_ATMEL_BASE_ADDR_LO );
-+ hi = tpm_read_index( TPM_ATMEL_BASE_ADDR_HI );
-+
-+ tpm_atmel.base = (hi<<8)|lo;
-+ dev_dbg( &pci_dev->dev, "Operating with base: 0x%x\n", tpm_atmel.base);
-
- /* verify that it is an Atmel part */
- if (tpm_read_index(4) != 'A' || tpm_read_index(5) != 'T'
-diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
---- a/drivers/char/tpm/tpm_nsc.c
-+++ b/drivers/char/tpm/tpm_nsc.c
-@@ -24,6 +24,10 @@
- /* National definitions */
- #define TPM_NSC_BASE 0x360
- #define TPM_NSC_IRQ 0x07
-+#define TPM_NSC_BASE0_HI 0x60
-+#define TPM_NSC_BASE0_LO 0x61
-+#define TPM_NSC_BASE1_HI 0x62
-+#define TPM_NSC_BASE1_LO 0x63
-
- #define NSC_LDN_INDEX 0x07
- #define NSC_SID_INDEX 0x20
-@@ -234,7 +238,6 @@ static struct tpm_vendor_specific tpm_ns
- .cancel = tpm_nsc_cancel,
- .req_complete_mask = NSC_STATUS_OBF,
- .req_complete_val = NSC_STATUS_OBF,
-- .base = TPM_NSC_BASE,
- .miscdev = { .fops = &nsc_ops, },
-
- };
-@@ -243,15 +246,16 @@ static int __devinit tpm_nsc_init(struct
- const struct pci_device_id *pci_id)
- {
- int rc = 0;
-+ int lo, hi;
-+
-+ hi = tpm_read_index(TPM_NSC_BASE0_HI);
-+ lo = tpm_read_index(TPM_NSC_BASE0_LO);
-+
-+ tpm_nsc.base = (hi<<8) | lo;
-
- if (pci_enable_device(pci_dev))
- return -EIO;
-
-- if (tpm_lpc_bus_init(pci_dev, TPM_NSC_BASE)) {
-- rc = -ENODEV;
-- goto out_err;
-- }
--
- /* verify that it is a National part (SID) */
- if (tpm_read_index(NSC_SID_INDEX) != 0xEF) {
- rc = -ENODEV;
-diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c
---- a/drivers/char/tty_ioctl.c
-+++ b/drivers/char/tty_ioctl.c
-@@ -476,11 +476,11 @@ int n_tty_ioctl(struct tty_struct * tty,
- ld = tty_ldisc_ref(tty);
- switch (arg) {
- case TCIFLUSH:
-- if (ld->flush_buffer)
-+ if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
- break;
- case TCIOFLUSH:
-- if (ld->flush_buffer)
-+ if (ld && ld->flush_buffer)
- ld->flush_buffer(tty);
- /* fall through */
- case TCOFLUSH:
-diff --git a/drivers/media/video/cx88/cx88-video.c
b/drivers/media/video/cx88/cx88-video.c
---- a/drivers/media/video/cx88/cx88-video.c
-+++ b/drivers/media/video/cx88/cx88-video.c
-@@ -261,7 +261,7 @@ static struct cx88_ctrl cx8800_ctls[] =
- .default_value = 0,
- .type = V4L2_CTRL_TYPE_INTEGER,
- },
-- .off = 0,
-+ .off = 128,
- .reg = MO_HUE,
- .mask = 0x00ff,
- .shift = 0,
-diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
---- a/drivers/net/e1000/e1000_main.c
-+++ b/drivers/net/e1000/e1000_main.c
-@@ -2307,6 +2307,7 @@ e1000_xmit_frame(struct sk_buff *skb, st
- tso = e1000_tso(adapter, skb);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
-+ spin_unlock_irqrestore(&adapter->tx_lock, flags);
- return NETDEV_TX_OK;
- }
-
-diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
---- a/drivers/net/hamradio/Kconfig
-+++ b/drivers/net/hamradio/Kconfig
-@@ -17,7 +17,7 @@ config MKISS
-
- config 6PACK
- tristate "Serial port 6PACK driver"
-- depends on AX25 && BROKEN_ON_SMP
-+ depends on AX25
- ---help---
- 6pack is a transmission protocol for the data exchange between your
- PC and your TNC (the Terminal Node Controller acts as a kind of
-diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
---- a/drivers/net/shaper.c
-+++ b/drivers/net/shaper.c
-@@ -135,10 +135,8 @@ static int shaper_start_xmit(struct sk_b
- {
- struct shaper *shaper = dev->priv;
- struct sk_buff *ptr;
--
-- if (down_trylock(&shaper->sem))
-- return -1;
-
-+ spin_lock(&shaper->lock);
- ptr=shaper->sendq.prev;
-
- /*
-@@ -232,7 +230,7 @@ static int shaper_start_xmit(struct sk_b
- shaper->stats.collisions++;
- }
- shaper_kick(shaper);
-- up(&shaper->sem);
-+ spin_unlock(&shaper->lock);
- return 0;
- }
-
-@@ -271,11 +269,9 @@ static void shaper_timer(unsigned long d
- {
- struct shaper *shaper = (struct shaper *)data;
-
-- if (!down_trylock(&shaper->sem)) {
-- shaper_kick(shaper);
-- up(&shaper->sem);
-- } else
-- mod_timer(&shaper->timer, jiffies);
-+ spin_lock(&shaper->lock);
-+ shaper_kick(shaper);
-+ spin_unlock(&shaper->lock);
- }
-
- /*
-@@ -332,21 +328,6 @@ static void shaper_kick(struct shaper *s
-
-
- /*
-- * Flush the shaper queues on a closedown
-- */
--
--static void shaper_flush(struct shaper *shaper)
--{
-- struct sk_buff *skb;
--
-- down(&shaper->sem);
-- while((skb=skb_dequeue(&shaper->sendq))!=NULL)
-- dev_kfree_skb(skb);
-- shaper_kick(shaper);
-- up(&shaper->sem);
--}
--
--/*
- * Bring the interface up. We just disallow this until a
- * bind.
- */
-@@ -375,7 +356,15 @@ static int shaper_open(struct net_device
- static int shaper_close(struct net_device *dev)
- {
- struct shaper *shaper=dev->priv;
-- shaper_flush(shaper);
-+ struct sk_buff *skb;
-+
-+ while ((skb = skb_dequeue(&shaper->sendq)) != NULL)
-+ dev_kfree_skb(skb);
-+
-+ spin_lock_bh(&shaper->lock);
-+ shaper_kick(shaper);
-+ spin_unlock_bh(&shaper->lock);
-+
- del_timer_sync(&shaper->timer);
- return 0;
- }
-@@ -576,6 +565,7 @@ static void shaper_init_priv(struct net_
- init_timer(&sh->timer);
- sh->timer.function=shaper_timer;
- sh->timer.data=(unsigned long)sh;
-+ spin_lock_init(&sh->lock);
- }
-
- /*
-diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
---- a/drivers/pci/pci-driver.c
-+++ b/drivers/pci/pci-driver.c
-@@ -396,7 +396,7 @@ int pci_register_driver(struct pci_drive
- /* FIXME, once all of the existing PCI drivers have been fixed to set
- * the pci shutdown function, this test can go away. */
- if (!drv->driver.shutdown)
-- drv->driver.shutdown = pci_device_shutdown,
-+ drv->driver.shutdown = pci_device_shutdown;
- drv->driver.owner = drv->owner;
- drv->driver.kobj.ktype = &pci_driver_kobj_type;
- pci_init_dynids(&drv->dynids);
-diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
---- a/drivers/scsi/qla2xxx/qla_init.c
-+++ b/drivers/scsi/qla2xxx/qla_init.c
-@@ -1914,9 +1914,11 @@ qla2x00_reg_remote_port(scsi_qla_host_t
- rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
-
- fcport->rport = rport = fc_remote_port_add(ha->host, 0, &rport_ids);
-- if (!rport)
-+ if (!rport) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate fc remote port!\n");
-+ return;
-+ }
-
- if (rport->scsi_target_id != -1 && rport->scsi_target_id < MAX_TARGETS)
- fcport->os_target_id = rport->scsi_target_id;
-diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
---- a/drivers/scsi/qla2xxx/qla_os.c
-+++ b/drivers/scsi/qla2xxx/qla_os.c
-@@ -1150,7 +1150,7 @@ iospace_error_exit:
- */
- int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
- {
-- int ret;
-+ int ret = -ENODEV;
- device_reg_t __iomem *reg;
- struct Scsi_Host *host;
- scsi_qla_host_t *ha;
-@@ -1161,7 +1161,7 @@ int qla2x00_probe_one(struct pci_dev *pd
- fc_port_t *fcport;
-
- if (pci_enable_device(pdev))
-- return -1;
-+ goto probe_out;
-
- host = scsi_host_alloc(&qla2x00_driver_template,
- sizeof(scsi_qla_host_t));
-@@ -1183,9 +1183,8 @@ int qla2x00_probe_one(struct pci_dev *pd
-
- /* Configure PCI I/O space */
- ret = qla2x00_iospace_config(ha);
-- if (ret != 0) {
-- goto probe_alloc_failed;
-- }
-+ if (ret)
-+ goto probe_failed;
-
- /* Sanitize the information from PCI BIOS. */
- host->irq = pdev->irq;
-@@ -1258,23 +1257,10 @@ int qla2x00_probe_one(struct pci_dev *pd
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to allocate memory for adapter\n");
-
-- goto probe_alloc_failed;
-+ ret = -ENOMEM;
-+ goto probe_failed;
- }
-
-- pci_set_drvdata(pdev, ha);
-- host->this_id = 255;
-- host->cmd_per_lun = 3;
-- host->unique_id = ha->instance;
-- host->max_cmd_len = MAX_CMDSZ;
-- host->max_channel = ha->ports - 1;
-- host->max_id = ha->max_targets;
-- host->max_lun = ha->max_luns;
-- host->transportt = qla2xxx_transport_template;
-- if (scsi_add_host(host, &pdev->dev))
-- goto probe_alloc_failed;
--
-- qla2x00_alloc_sysfs_attr(ha);
--
- if (qla2x00_initialize_adapter(ha) &&
- !(ha->device_flags & DFLG_NO_CABLE)) {
-
-@@ -1285,11 +1271,10 @@ int qla2x00_probe_one(struct pci_dev *pd
- "Adapter flags %x.\n",
- ha->host_no, ha->device_flags));
-
-+ ret = -ENODEV;
- goto probe_failed;
- }
-
-- qla2x00_init_host_attr(ha);
--
- /*
- * Startup the kernel thread for this host adapter
- */
-@@ -1299,17 +1284,26 @@ int qla2x00_probe_one(struct pci_dev *pd
- qla_printk(KERN_WARNING, ha,
- "Unable to start DPC thread!\n");
-
-+ ret = -ENODEV;
- goto probe_failed;
- }
- wait_for_completion(&ha->dpc_inited);
-
-+ host->this_id = 255;
-+ host->cmd_per_lun = 3;
-+ host->unique_id = ha->instance;
-+ host->max_cmd_len = MAX_CMDSZ;
-+ host->max_channel = ha->ports - 1;
-+ host->max_lun = MAX_LUNS;
-+ host->transportt = qla2xxx_transport_template;
-+
- if (IS_QLA2100(ha) || IS_QLA2200(ha))
- ret = request_irq(host->irq, qla2100_intr_handler,
- SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
- else
- ret = request_irq(host->irq, qla2300_intr_handler,
- SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
-- if (ret != 0) {
-+ if (ret) {
- qla_printk(KERN_WARNING, ha,
- "Failed to reserve interrupt %d already in use.\n",
- host->irq);
-@@ -1363,9 +1357,18 @@ int qla2x00_probe_one(struct pci_dev *pd
- msleep(10);
- }
-
-+ pci_set_drvdata(pdev, ha);
- ha->flags.init_done = 1;
- num_hosts++;
-
-+ ret = scsi_add_host(host, &pdev->dev);
-+ if (ret)
-+ goto probe_failed;
-+
-+ qla2x00_alloc_sysfs_attr(ha);
-+
-+ qla2x00_init_host_attr(ha);
-+
- qla_printk(KERN_INFO, ha, "\n"
- " QLogic Fibre Channel HBA Driver: %s\n"
- " QLogic %s - %s\n"
-@@ -1384,9 +1387,6 @@ int qla2x00_probe_one(struct pci_dev *pd
- probe_failed:
- fc_remove_host(ha->host);
-
-- scsi_remove_host(host);
--
--probe_alloc_failed:
- qla2x00_free_device(ha);
-
- scsi_host_put(host);
-@@ -1394,7 +1394,8 @@ probe_alloc_failed:
- probe_disable_device:
- pci_disable_device(pdev);
-
-- return -1;
-+probe_out:
-+ return ret;
- }
- EXPORT_SYMBOL_GPL(qla2x00_probe_one);
-
-diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
---- a/drivers/scsi/sg.c
-+++ b/drivers/scsi/sg.c
-@@ -2969,23 +2969,22 @@ static void * dev_seq_start(struct seq_f
- {
- struct sg_proc_deviter * it = kmalloc(sizeof(*it), GFP_KERNEL);
-
-+ s->private = it;
- if (! it)
- return NULL;
-+
- if (NULL == sg_dev_arr)
-- goto err1;
-+ return NULL;
- it->index = *pos;
- it->max = sg_last_dev();
- if (it->index >= it->max)
-- goto err1;
-+ return NULL;
- return it;
--err1:
-- kfree(it);
-- return NULL;
- }
-
- static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos)
- {
-- struct sg_proc_deviter * it = (struct sg_proc_deviter *) v;
-+ struct sg_proc_deviter * it = s->private;
-
- *pos = ++it->index;
- return (it->index < it->max) ? it : NULL;
-@@ -2993,7 +2992,9 @@ static void * dev_seq_next(struct seq_fi
-
- static void dev_seq_stop(struct seq_file *s, void *v)
- {
-- kfree (v);
-+ struct sg_proc_deviter * it = s->private;
-+
-+ kfree (it);
- }
-
- static int sg_proc_open_dev(struct inode *inode, struct file *file)
-diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
---- a/drivers/usb/net/usbnet.c
-+++ b/drivers/usb/net/usbnet.c
-@@ -1922,7 +1922,7 @@ static int genelink_rx_fixup (struct usb
-
- // copy the packet data to the new skb
- memcpy(skb_put(gl_skb, size), packet->packet_data,
size);
-- skb_return (dev, skb);
-+ skb_return (dev, gl_skb);
- }
-
- // advance to the next packet
-diff --git a/fs/bio.c b/fs/bio.c
---- a/fs/bio.c
-+++ b/fs/bio.c
-@@ -261,6 +261,7 @@ inline void __bio_clone(struct bio *bio,
- */
- bio->bi_vcnt = bio_src->bi_vcnt;
- bio->bi_size = bio_src->bi_size;
-+ bio->bi_idx = bio_src->bi_idx;
- bio_phys_segments(q, bio);
- bio_hw_segments(q, bio);
- }
-diff --git a/fs/char_dev.c b/fs/char_dev.c
---- a/fs/char_dev.c
-+++ b/fs/char_dev.c
-@@ -139,7 +139,7 @@ __unregister_chrdev_region(unsigned majo
- struct char_device_struct *cd = NULL, **cp;
- int i = major_to_index(major);
-
-- up(&chrdevs_lock);
-+ down(&chrdevs_lock);
- for (cp = &chrdevs[i]; *cp; cp = &(*cp)->next)
- if ((*cp)->major == major &&
- (*cp)->baseminor == baseminor &&
-diff --git a/fs/exec.c b/fs/exec.c
---- a/fs/exec.c
-+++ b/fs/exec.c
-@@ -649,6 +649,7 @@ static inline int de_thread(struct task_
- }
- sig->group_exit_task = NULL;
- sig->notify_count = 0;
-+ sig->real_timer.data = (unsigned long)current;
- spin_unlock_irq(lock);
-
- /*
-diff --git a/fs/isofs/compress.c b/fs/isofs/compress.c
---- a/fs/isofs/compress.c
-+++ b/fs/isofs/compress.c
-@@ -129,8 +129,14 @@ static int zisofs_readpage(struct file *
- cend = le32_to_cpu(*(__le32 *)(bh->b_data + (blockendptr & bufmask)));
- brelse(bh);
-
-+ if (cstart > cend)
-+ goto eio;
-+
- csize = cend-cstart;
-
-+ if (csize > deflateBound(1UL << zisofs_block_shift))
-+ goto eio;
-+
- /* Now page[] contains an array of pages, any of which can be NULL,
- and the locks on which we hold. We should now read the data and
- release the pages. If the pages are NULL the decompressed data
-diff --git a/include/asm-i386/string.h b/include/asm-i386/string.h
---- a/include/asm-i386/string.h
-+++ b/include/asm-i386/string.h
-@@ -116,7 +116,8 @@ __asm__ __volatile__(
- "orb $1,%%al\n"
- "3:"
- :"=a" (__res), "=&S" (d0), "=&D" (d1)
-- :"1" (cs),"2" (ct));
-+ :"1" (cs),"2" (ct)
-+ :"memory");
- return __res;
- }
-
-@@ -138,8 +139,9 @@ __asm__ __volatile__(
- "3:\tsbbl %%eax,%%eax\n\t"
- "orb $1,%%al\n"
- "4:"
-- :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
-- :"1" (cs),"2" (ct),"3" (count));
-+ :"=a" (__res), "=&S" (d0), "=&D" (d1), "=&c" (d2)
-+ :"1" (cs),"2" (ct),"3" (count)
-+ :"memory");
- return __res;
- }
-
-@@ -158,7 +160,9 @@ __asm__ __volatile__(
- "movl $1,%1\n"
- "2:\tmovl %1,%0\n\t"
- "decl %0"
-- :"=a" (__res), "=&S" (d0) : "1" (s),"0" (c));
-+ :"=a" (__res), "=&S" (d0)
-+ :"1" (s),"0" (c)
-+ :"memory");
- return __res;
- }
-
-@@ -175,7 +179,9 @@ __asm__ __volatile__(
- "leal -1(%%esi),%0\n"
- "2:\ttestb %%al,%%al\n\t"
- "jne 1b"
-- :"=g" (__res), "=&S" (d0), "=&a" (d1) :"0" (0),"1" (s),"2" (c));
-+ :"=g" (__res), "=&S" (d0), "=&a" (d1)
-+ :"0" (0),"1" (s),"2" (c)
-+ :"memory");
- return __res;
- }
-
-@@ -189,7 +195,9 @@ __asm__ __volatile__(
- "scasb\n\t"
- "notl %0\n\t"
- "decl %0"
-- :"=c" (__res), "=&D" (d0) :"1" (s),"a" (0), "0" (0xffffffffu));
-+ :"=c" (__res), "=&D" (d0)
-+ :"1" (s),"a" (0), "0" (0xffffffffu)
-+ :"memory");
- return __res;
- }
-
-@@ -333,7 +341,9 @@ __asm__ __volatile__(
- "je 1f\n\t"
- "movl $1,%0\n"
- "1:\tdecl %0"
-- :"=D" (__res), "=&c" (d0) : "a" (c),"0" (cs),"1" (count));
-+ :"=D" (__res), "=&c" (d0)
-+ :"a" (c),"0" (cs),"1" (count)
-+ :"memory");
- return __res;
- }
-
-@@ -369,7 +379,7 @@ __asm__ __volatile__(
- "je 2f\n\t"
- "stosb\n"
- "2:"
-- : "=&c" (d0), "=&D" (d1)
-+ :"=&c" (d0), "=&D" (d1)
- :"a" (c), "q" (count), "0" (count/4), "1" ((long) s)
- :"memory");
- return (s);
-@@ -392,7 +402,8 @@ __asm__ __volatile__(
- "jne 1b\n"
- "3:\tsubl %2,%0"
- :"=a" (__res), "=&d" (d0)
-- :"c" (s),"1" (count));
-+ :"c" (s),"1" (count)
-+ :"memory");
- return __res;
- }
- /* end of additional stuff */
-@@ -473,7 +484,8 @@ static inline void * memscan(void * addr
- "dec %%edi\n"
- "1:"
- : "=D" (addr), "=c" (size)
-- : "0" (addr), "1" (size), "a" (c));
-+ : "0" (addr), "1" (size), "a" (c)
-+ : "memory");
- return addr;
- }
-
-diff --git a/include/asm-x86_64/smp.h b/include/asm-x86_64/smp.h
---- a/include/asm-x86_64/smp.h
-+++ b/include/asm-x86_64/smp.h
-@@ -46,6 +46,8 @@ extern int pic_mode;
- extern int smp_num_siblings;
- extern void smp_flush_tlb(void);
- extern void smp_message_irq(int cpl, void *dev_id, struct pt_regs *regs);
-+extern int smp_call_function_single (int cpuid, void (*func) (void *info),
void *info,
-+ int retry, int wait);
- extern void smp_send_reschedule(int cpu);
- extern void smp_invalidate_rcv(void); /* Process an NMI */
- extern void zap_low_mappings(void);
-diff --git a/include/linux/if_shaper.h b/include/linux/if_shaper.h
---- a/include/linux/if_shaper.h
-+++ b/include/linux/if_shaper.h
-@@ -23,7 +23,7 @@ struct shaper
- __u32 shapeclock;
- unsigned long recovery; /* Time we can next clock a packet out on
- an empty queue */
-- struct semaphore sem;
-+ spinlock_t lock;
- struct net_device_stats stats;
- struct net_device *dev;
- int (*hard_start_xmit) (struct sk_buff *skb,
-diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -1192,7 +1192,7 @@ static inline void *skb_header_pointer(c
- {
- int hlen = skb_headlen(skb);
-
-- if (offset + len <= hlen)
-+ if (hlen - offset >= len)
- return skb->data + offset;
-
- if (skb_copy_bits(skb, offset, buffer, len) < 0)
-diff --git a/include/linux/zlib.h b/include/linux/zlib.h
---- a/include/linux/zlib.h
-+++ b/include/linux/zlib.h
-@@ -506,6 +506,11 @@ extern int zlib_deflateReset (z_streamp
- stream state was inconsistent (such as zalloc or state being NULL).
- */
-
-+static inline unsigned long deflateBound(unsigned long s)
-+{
-+ return s + ((s + 7) >> 3) + ((s + 63) >> 6) + 11;
-+}
-+
- extern int zlib_deflateParams (z_streamp strm, int level, int strategy);
- /*
- Dynamically update the compression level and compression strategy. The
-diff --git a/kernel/module.c b/kernel/module.c
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -249,13 +249,18 @@ static inline unsigned int block_size(in
- /* Created by linker magic */
- extern char __per_cpu_start[], __per_cpu_end[];
-
--static void *percpu_modalloc(unsigned long size, unsigned long align)
-+static void *percpu_modalloc(unsigned long size, unsigned long align,
-+ const char *name)
- {
- unsigned long extra;
- unsigned int i;
- void *ptr;
-
-- BUG_ON(align > SMP_CACHE_BYTES);
-+ if (align > SMP_CACHE_BYTES) {
-+ printk(KERN_WARNING "%s: per-cpu alignment %li > %i\n",
-+ name, align, SMP_CACHE_BYTES);
-+ align = SMP_CACHE_BYTES;
-+ }
-
- ptr = __per_cpu_start;
- for (i = 0; i < pcpu_num_used; ptr += block_size(pcpu_size[i]), i++) {
-@@ -347,7 +352,8 @@ static int percpu_modinit(void)
- }
- __initcall(percpu_modinit);
- #else /* ... !CONFIG_SMP */
--static inline void *percpu_modalloc(unsigned long size, unsigned long align)
-+static inline void *percpu_modalloc(unsigned long size, unsigned long align,
-+ const char *name)
- {
- return NULL;
- }
-@@ -1554,7 +1560,8 @@ static struct module *load_module(void _
- if (pcpuindex) {
- /* We have a special allocation for this section. */
- percpu = percpu_modalloc(sechdrs[pcpuindex].sh_size,
-- sechdrs[pcpuindex].sh_addralign);
-+ sechdrs[pcpuindex].sh_addralign,
-+ mod->name);
- if (!percpu) {
- err = -ENOMEM;
- goto free_mod;
-diff --git a/kernel/signal.c b/kernel/signal.c
---- a/kernel/signal.c
-+++ b/kernel/signal.c
-@@ -686,7 +686,7 @@ static void handle_stop_signal(int sig,
- {
- struct task_struct *t;
-
-- if (p->flags & SIGNAL_GROUP_EXIT)
-+ if (p->signal->flags & SIGNAL_GROUP_EXIT)
- /*
- * The process is in the middle of dying already.
- */
-diff --git a/lib/inflate.c b/lib/inflate.c
---- a/lib/inflate.c
-+++ b/lib/inflate.c
-@@ -326,7 +326,7 @@ DEBG("huft1 ");
- {
- *t = (struct huft *)NULL;
- *m = 0;
-- return 0;
-+ return 2;
- }
-
- DEBG("huft2 ");
-@@ -374,6 +374,7 @@ DEBG("huft5 ");
- if ((j = *p++) != 0)
- v[x[j]++] = i;
- } while (++i < n);
-+ n = x[g]; /* set n to length of v */
-
- DEBG("h6 ");
-
-@@ -410,12 +411,13 @@ DEBG1("1 ");
- DEBG1("2 ");
- f -= a + 1; /* deduct codes from patterns left */
- xp = c + k;
-- while (++j < z) /* try smaller tables up to z bits */
-- {
-- if ((f <<= 1) <= *++xp)
-- break; /* enough codes to use up j bits */
-- f -= *xp; /* else deduct codes from patterns */
-- }
-+ if (j < z)
-+ while (++j < z) /* try smaller tables up to z bits */
-+ {
-+ if ((f <<= 1) <= *++xp)
-+ break; /* enough codes to use up j bits */
-+ f -= *xp; /* else deduct codes from patterns */
-+ }
- }
- DEBG1("3 ");
- z = 1 << j; /* table entries for j-bit table */
-diff --git a/mm/memory.c b/mm/memory.c
---- a/mm/memory.c
-+++ b/mm/memory.c
-@@ -1164,7 +1164,7 @@ int remap_pfn_range(struct vm_area_struc
- {
- pgd_t *pgd;
- unsigned long next;
-- unsigned long end = addr + size;
-+ unsigned long end = addr + PAGE_ALIGN(size);
- struct mm_struct *mm = vma->vm_mm;
- int err;
-
-diff --git a/mm/mempolicy.c b/mm/mempolicy.c
---- a/mm/mempolicy.c
-+++ b/mm/mempolicy.c
-@@ -409,7 +409,7 @@ asmlinkage long sys_set_mempolicy(int mo
- struct mempolicy *new;
- DECLARE_BITMAP(nodes, MAX_NUMNODES);
-
-- if (mode > MPOL_MAX)
-+ if (mode < 0 || mode > MPOL_MAX)
- return -EINVAL;
- err = get_nodes(nodes, nmask, maxnode, mode);
- if (err)
-diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
---- a/net/8021q/vlan.c
-+++ b/net/8021q/vlan.c
-@@ -578,6 +578,14 @@ static int vlan_device_event(struct noti
- if (!vlandev)
- continue;
-
-+ if (netif_carrier_ok(dev)) {
-+ if (!netif_carrier_ok(vlandev))
-+ netif_carrier_on(vlandev);
-+ } else {
-+ if (netif_carrier_ok(vlandev))
-+ netif_carrier_off(vlandev);
-+ }
-+
- if ((vlandev->state & VLAN_LINK_STATE_MASK) != flgs) {
- vlandev->state = (vlandev->state &~
VLAN_LINK_STATE_MASK)
- | flgs;
-diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
---- a/net/ipv4/icmp.c
-+++ b/net/ipv4/icmp.c
-@@ -349,12 +349,12 @@ static void icmp_push_reply(struct icmp_
- {
- struct sk_buff *skb;
-
-- ip_append_data(icmp_socket->sk, icmp_glue_bits, icmp_param,
-- icmp_param->data_len+icmp_param->head_len,
-- icmp_param->head_len,
-- ipc, rt, MSG_DONTWAIT);
--
-- if ((skb = skb_peek(&icmp_socket->sk->sk_write_queue)) != NULL) {
-+ if (ip_append_data(icmp_socket->sk, icmp_glue_bits, icmp_param,
-+ icmp_param->data_len+icmp_param->head_len,
-+ icmp_param->head_len,
-+ ipc, rt, MSG_DONTWAIT) < 0)
-+ ip_flush_pending_frames(icmp_socket->sk);
-+ else if ((skb = skb_peek(&icmp_socket->sk->sk_write_queue)) != NULL) {
- struct icmphdr *icmph = skb->h.icmph;
- unsigned int csum = 0;
- struct sk_buff *skb1;
-diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
---- a/net/ipv4/ip_output.c
-+++ b/net/ipv4/ip_output.c
-@@ -111,7 +111,6 @@ static int ip_dev_loopback_xmit(struct s
- #ifdef CONFIG_NETFILTER_DEBUG
- nf_debug_ip_loopback_xmit(newskb);
- #endif
-- nf_reset(newskb);
- netif_rx(newskb);
- return 0;
- }
-@@ -196,8 +195,6 @@ static inline int ip_finish_output2(stru
- nf_debug_ip_finish_output2(skb);
- #endif /*CONFIG_NETFILTER_DEBUG*/
-
-- nf_reset(skb);
--
- if (hh) {
- int hh_alen;
-
-diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
---- a/net/ipv4/ip_sockglue.c
-+++ b/net/ipv4/ip_sockglue.c
-@@ -848,6 +848,9 @@ mc_msf_out:
-
- case IP_IPSEC_POLICY:
- case IP_XFRM_POLICY:
-+ err = -EPERM;
-+ if (!capable(CAP_NET_ADMIN))
-+ break;
- err = xfrm_user_policy(sk, optname, optval, optlen);
- break;
-
-diff --git a/net/ipv4/netfilter/ip_conntrack_core.c
b/net/ipv4/netfilter/ip_conntrack_core.c
---- a/net/ipv4/netfilter/ip_conntrack_core.c
-+++ b/net/ipv4/netfilter/ip_conntrack_core.c
-@@ -1124,6 +1124,9 @@ void ip_conntrack_cleanup(void)
- schedule();
- goto i_see_dead_people;
- }
-+ /* wait until all references to ip_conntrack_untracked are dropped */
-+ while (atomic_read(&ip_conntrack_untracked.ct_general.use) > 1)
-+ schedule();
-
- kmem_cache_destroy(ip_conntrack_cachep);
- kmem_cache_destroy(ip_conntrack_expect_cachep);
-diff --git a/net/ipv4/netfilter/ip_conntrack_standalone.c
b/net/ipv4/netfilter/ip_conntrack_standalone.c
---- a/net/ipv4/netfilter/ip_conntrack_standalone.c
-+++ b/net/ipv4/netfilter/ip_conntrack_standalone.c
-@@ -432,6 +432,13 @@ static unsigned int ip_conntrack_defrag(
- const struct net_device *out,
- int (*okfn)(struct sk_buff *))
- {
-+#if !defined(CONFIG_IP_NF_NAT) && !defined(CONFIG_IP_NF_NAT_MODULE)
-+ /* Previously seen (loopback)? Ignore. Do this before
-+ fragment check. */
-+ if ((*pskb)->nfct)
-+ return NF_ACCEPT;
-+#endif
-+
- /* Gather fragments. */
- if ((*pskb)->nh.iph->frag_off & htons(IP_MF|IP_OFFSET)) {
- *pskb = ip_ct_gather_frags(*pskb,
-diff --git a/net/ipv4/netfilter/ip_nat_proto_tcp.c
b/net/ipv4/netfilter/ip_nat_proto_tcp.c
---- a/net/ipv4/netfilter/ip_nat_proto_tcp.c
-+++ b/net/ipv4/netfilter/ip_nat_proto_tcp.c
-@@ -40,7 +40,8 @@ tcp_unique_tuple(struct ip_conntrack_tup
- enum ip_nat_manip_type maniptype,
- const struct ip_conntrack *conntrack)
- {
-- static u_int16_t port, *portptr;
-+ static u_int16_t port;
-+ u_int16_t *portptr;
- unsigned int range_size, min, i;
-
- if (maniptype == IP_NAT_MANIP_SRC)
-diff --git a/net/ipv4/netfilter/ip_nat_proto_udp.c
b/net/ipv4/netfilter/ip_nat_proto_udp.c
---- a/net/ipv4/netfilter/ip_nat_proto_udp.c
-+++ b/net/ipv4/netfilter/ip_nat_proto_udp.c
-@@ -41,7 +41,8 @@ udp_unique_tuple(struct ip_conntrack_tup
- enum ip_nat_manip_type maniptype,
- const struct ip_conntrack *conntrack)
- {
-- static u_int16_t port, *portptr;
-+ static u_int16_t port;
-+ u_int16_t *portptr;
- unsigned int range_size, min, i;
-
- if (maniptype == IP_NAT_MANIP_SRC)
-diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c
---- a/net/ipv6/ip6_input.c
-+++ b/net/ipv6/ip6_input.c
-@@ -198,12 +198,13 @@ resubmit:
- if (!raw_sk) {
- if (xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
- IP6_INC_STATS_BH(IPSTATS_MIB_INUNKNOWNPROTOS);
-- icmpv6_param_prob(skb, ICMPV6_UNK_NEXTHDR,
nhoff);
-+ icmpv6_send(skb, ICMPV6_PARAMPROB,
-+ ICMPV6_UNK_NEXTHDR, nhoff,
-+ skb->dev);
- }
-- } else {
-+ } else
- IP6_INC_STATS_BH(IPSTATS_MIB_INDELIVERS);
-- kfree_skb(skb);
-- }
-+ kfree_skb(skb);
- }
- rcu_read_unlock();
- return 0;
-diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
---- a/net/ipv6/ipv6_sockglue.c
-+++ b/net/ipv6/ipv6_sockglue.c
-@@ -503,6 +503,9 @@ done:
- break;
- case IPV6_IPSEC_POLICY:
- case IPV6_XFRM_POLICY:
-+ retv = -EPERM;
-+ if (!capable(CAP_NET_ADMIN))
-+ break;
- retv = xfrm_user_policy(sk, optname, optval, optlen);
- break;
-
-diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
---- a/net/ipv6/netfilter/ip6_queue.c
-+++ b/net/ipv6/netfilter/ip6_queue.c
-@@ -76,7 +76,9 @@ static DECLARE_MUTEX(ipqnl_sem);
- static void
- ipq_issue_verdict(struct ipq_queue_entry *entry, int verdict)
- {
-+ local_bh_disable();
- nf_reinject(entry->skb, entry->info, verdict);
-+ local_bh_enable();
- kfree(entry);
- }
-
-diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
---- a/net/netlink/af_netlink.c
-+++ b/net/netlink/af_netlink.c
-@@ -315,8 +315,8 @@ err:
- static void netlink_remove(struct sock *sk)
- {
- netlink_table_grab();
-- nl_table[sk->sk_protocol].hash.entries--;
-- sk_del_node_init(sk);
-+ if (sk_del_node_init(sk))
-+ nl_table[sk->sk_protocol].hash.entries--;
- if (nlk_sk(sk)->groups)
- __sk_del_bind_node(sk);
- netlink_table_ungrab();
-@@ -429,7 +429,12 @@ retry:
- err = netlink_insert(sk, pid);
- if (err == -EADDRINUSE)
- goto retry;
-- return 0;
-+
-+ /* If 2 threads race to autobind, that is fine. */
-+ if (err == -EBUSY)
-+ err = 0;
-+
-+ return err;
- }
-
- static inline int netlink_capable(struct socket *sock, unsigned int flag)
-diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -274,6 +274,9 @@ static int packet_rcv_spkt(struct sk_buf
- dst_release(skb->dst);
- skb->dst = NULL;
-
-+ /* drop conntrack reference */
-+ nf_reset(skb);
-+
- spkt = (struct sockaddr_pkt*)skb->cb;
-
- skb_push(skb, skb->data-skb->mac.raw);
-@@ -517,6 +520,9 @@ static int packet_rcv(struct sk_buff *sk
- dst_release(skb->dst);
- skb->dst = NULL;
-
-+ /* drop conntrack reference */
-+ nf_reset(skb);
-+
- spin_lock(&sk->sk_receive_queue.lock);
- po->stats.tp_packets++;
- __skb_queue_tail(&sk->sk_receive_queue, skb);
-diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
---- a/net/xfrm/xfrm_user.c
-+++ b/net/xfrm/xfrm_user.c
-@@ -1180,6 +1180,9 @@ static struct xfrm_policy *xfrm_compile_
- if (nr > XFRM_MAX_DEPTH)
- return NULL;
-
-+ if (p->dir > XFRM_POLICY_OUT)
-+ return NULL;
-+
- xp = xfrm_policy_alloc(GFP_KERNEL);
- if (xp == NULL) {
- *dir = -ENOBUFS;
-diff --git a/security/keys/keyring.c b/security/keys/keyring.c
---- a/security/keys/keyring.c
-+++ b/security/keys/keyring.c
-@@ -188,7 +188,11 @@ static void keyring_destroy(struct key *
-
- if (keyring->description) {
- write_lock(&keyring_name_lock);
-- list_del(&keyring->type_data.link);
-+
-+ if (keyring->type_data.link.next != NULL &&
-+ !list_empty(&keyring->type_data.link))
-+ list_del(&keyring->type_data.link);
-+
- write_unlock(&keyring_name_lock);
- }
-
-diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
---- a/security/keys/process_keys.c
-+++ b/security/keys/process_keys.c
-@@ -641,7 +641,7 @@ long join_session_keyring(const char *na
- keyring = keyring_alloc(name, tsk->uid, tsk->gid, 0, NULL);
- if (IS_ERR(keyring)) {
- ret = PTR_ERR(keyring);
-- goto error;
-+ goto error2;
- }
- }
- else if (IS_ERR(keyring)) {
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/cpu-hotplug-init.patch
--- a/patches/linux-2.6.12/cpu-hotplug-init.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,34 +0,0 @@
-diff -ur linux-2.6.12.orig/include/linux/init.h
linux-2.6.12/include/linux/init.h
---- linux-2.6.12.orig/include/linux/init.h 2005-11-01 14:52:28.656025573
+0000
-+++ linux-2.6.12/include/linux/init.h 2005-11-01 14:53:28.015791549 +0000
-@@ -229,6 +229,18 @@
- #define __devexitdata __exitdata
- #endif
-
-+#ifdef CONFIG_HOTPLUG_CPU
-+#define __cpuinit
-+#define __cpuinitdata
-+#define __cpuexit
-+#define __cpuexitdata
-+#else
-+#define __cpuinit __init
-+#define __cpuinitdata __initdata
-+#define __cpuexit __exit
-+#define __cpuexitdata __exitdata
-+#endif
-+
- /* Functions marked as __devexit may be discarded at kernel link time,
depending
- on config options. Newer versions of binutils detect references from
- retained sections to discarded sections and flag an error. Pointers to
-diff -ur linux-2.6.12.orig/arch/x86_64/kernel/i387.c
linux-2.6.12/arch/x86_64/kernel/i387.c
---- linux-2.6.12.orig/arch/x86_64/kernel/i387.c 2005-11-01
15:01:58.932991232 +0000
-+++ linux-2.6.12/arch/x86_64/kernel/i387.c 2005-11-01 15:02:09.729312416
+0000
-@@ -42,7 +42,7 @@
- * Called at bootup to set up the initial FPU state that is later cloned
- * into all processes.
- */
--void __init fpu_init(void)
-+void __cpuinit fpu_init(void)
- {
- unsigned long oldcr0 = read_cr0();
- extern void __bad_fxsave_alignment(void);
diff -r 9a05a503897c -r 4b06313b9790
patches/linux-2.6.12/i386-cpu-hotplug-updated-for-mm.patch
--- a/patches/linux-2.6.12/i386-cpu-hotplug-updated-for-mm.patch Tue Jan
31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,581 +0,0 @@
-diff -Naur linux-2.6.12.orig/arch/i386/Kconfig linux-2.6.12/arch/i386/Kconfig
---- linux-2.6.12.orig/arch/i386/Kconfig 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/Kconfig 2005-07-08 12:34:10.000000000 -0400
-@@ -1226,6 +1226,15 @@
- This support is also available as a module. If compiled as a
- module, it will be called scx200.
-
-+config HOTPLUG_CPU
-+ bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
-+ depends on SMP && HOTPLUG && EXPERIMENTAL
-+ ---help---
-+ Say Y here to experiment with turning CPUs off and on. CPUs
-+ can be controlled through /sys/devices/system/cpu.
-+
-+ Say N.
-+
- source "drivers/pcmcia/Kconfig"
-
- source "drivers/pci/hotplug/Kconfig"
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/apic.c
linux-2.6.12/arch/i386/kernel/apic.c
---- linux-2.6.12.orig/arch/i386/kernel/apic.c 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/kernel/apic.c 2005-07-08 12:34:10.000000000
-0400
-@@ -26,6 +26,7 @@
- #include <linux/mc146818rtc.h>
- #include <linux/kernel_stat.h>
- #include <linux/sysdev.h>
-+#include <linux/cpu.h>
-
- #include <asm/atomic.h>
- #include <asm/smp.h>
-@@ -1048,7 +1049,7 @@
- setup_APIC_timer(calibration_result);
- }
-
--void __init disable_APIC_timer(void)
-+void __devinit disable_APIC_timer(void)
- {
- if (using_apic_timer) {
- unsigned long v;
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/io_apic.c
linux-2.6.12/arch/i386/kernel/io_apic.c
---- linux-2.6.12.orig/arch/i386/kernel/io_apic.c 2005-07-08
12:33:40.000000000 -0400
-+++ linux-2.6.12/arch/i386/kernel/io_apic.c 2005-07-08 12:34:10.000000000
-0400
-@@ -576,9 +576,11 @@
- try_to_freeze(PF_FREEZE);
- if (time_after(jiffies,
- prev_balance_time+balanced_irq_interval)) {
-+ preempt_disable();
- do_irq_balance();
- prev_balance_time = jiffies;
- time_remaining = balanced_irq_interval;
-+ preempt_enable();
- }
- }
- return 0;
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/irq.c
linux-2.6.12/arch/i386/kernel/irq.c
---- linux-2.6.12.orig/arch/i386/kernel/irq.c 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/kernel/irq.c 2005-07-08 12:36:06.000000000
-0400
-@@ -15,6 +15,9 @@
- #include <linux/seq_file.h>
- #include <linux/interrupt.h>
- #include <linux/kernel_stat.h>
-+#include <linux/notifier.h>
-+#include <linux/cpu.h>
-+#include <linux/delay.h>
-
- DEFINE_PER_CPU(irq_cpustat_t, irq_stat) ____cacheline_maxaligned_in_smp;
- EXPORT_PER_CPU_SYMBOL(irq_stat);
-@@ -210,9 +213,8 @@
-
- if (i == 0) {
- seq_printf(p, " ");
-- for (j=0; j<NR_CPUS; j++)
-- if (cpu_online(j))
-- seq_printf(p, "CPU%d ",j);
-+ for_each_cpu(j)
-+ seq_printf(p, "CPU%d ",j);
- seq_putc(p, '\n');
- }
-
-@@ -225,9 +227,8 @@
- #ifndef CONFIG_SMP
- seq_printf(p, "%10u ", kstat_irqs(i));
- #else
-- for (j = 0; j < NR_CPUS; j++)
-- if (cpu_online(j))
-- seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
-+ for_each_cpu(j)
-+ seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
- #endif
- seq_printf(p, " %14s", irq_desc[i].handler->typename);
- seq_printf(p, " %s", action->name);
-@@ -240,16 +241,13 @@
- spin_unlock_irqrestore(&irq_desc[i].lock, flags);
- } else if (i == NR_IRQS) {
- seq_printf(p, "NMI: ");
-- for (j = 0; j < NR_CPUS; j++)
-- if (cpu_online(j))
-- seq_printf(p, "%10u ", nmi_count(j));
-+ for_each_cpu(j)
-+ seq_printf(p, "%10u ", nmi_count(j));
- seq_putc(p, '\n');
- #ifdef CONFIG_X86_LOCAL_APIC
- seq_printf(p, "LOC: ");
-- for (j = 0; j < NR_CPUS; j++)
-- if (cpu_online(j))
-- seq_printf(p, "%10u ",
-- per_cpu(irq_stat,j).apic_timer_irqs);
-+ for_each_cpu(j)
-+ seq_printf(p, "%10u ",
per_cpu(irq_stat,j).apic_timer_irqs);
- seq_putc(p, '\n');
- #endif
- seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
-@@ -259,3 +257,45 @@
- }
- return 0;
- }
-+
-+#ifdef CONFIG_HOTPLUG_CPU
-+#include <mach_apic.h>
-+
-+void fixup_irqs(cpumask_t map)
-+{
-+ unsigned int irq;
-+ static int warned;
-+
-+ for (irq = 0; irq < NR_IRQS; irq++) {
-+ cpumask_t mask;
-+ if (irq == 2)
-+ continue;
-+
-+ cpus_and(mask, irq_affinity[irq], map);
-+ if (any_online_cpu(mask) == NR_CPUS) {
-+ printk("Breaking affinity for irq %i\n", irq);
-+ mask = map;
-+ }
-+ if (irq_desc[irq].handler->set_affinity)
-+ irq_desc[irq].handler->set_affinity(irq, mask);
-+ else if (irq_desc[irq].action && !(warned++))
-+ printk("Cannot set affinity for irq %i\n", irq);
-+ }
-+
-+#if 0
-+ barrier();
-+ /* Ingo Molnar says: "after the IO-APIC masks have been redirected
-+ [note the nop - the interrupt-enable boundary on x86 is two
-+ instructions from sti] - to flush out pending hardirqs and
-+ IPIs. After this point nothing is supposed to reach this CPU." */
-+ __asm__ __volatile__("sti; nop; cli");
-+ barrier();
-+#else
-+ /* That doesn't seem sufficient. Give it 1ms. */
-+ local_irq_enable();
-+ mdelay(1);
-+ local_irq_disable();
-+#endif
-+}
-+#endif
-+
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/msr.c
linux-2.6.12/arch/i386/kernel/msr.c
---- linux-2.6.12.orig/arch/i386/kernel/msr.c 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/kernel/msr.c 2005-07-08 12:34:10.000000000
-0400
-@@ -260,7 +260,7 @@
- .open = msr_open,
- };
-
--static int msr_class_simple_device_add(int i)
-+static int __devinit msr_class_simple_device_add(int i)
- {
- int err = 0;
- struct class_device *class_err;
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/process.c
linux-2.6.12/arch/i386/kernel/process.c
---- linux-2.6.12.orig/arch/i386/kernel/process.c 2005-07-08
12:33:40.000000000 -0400
-+++ linux-2.6.12/arch/i386/kernel/process.c 2005-07-08 12:36:43.000000000
-0400
-@@ -13,6 +13,7 @@
-
- #include <stdarg.h>
-
-+#include <linux/cpu.h>
- #include <linux/errno.h>
- #include <linux/sched.h>
- #include <linux/fs.h>
-@@ -54,6 +55,9 @@
- #include <linux/irq.h>
- #include <linux/err.h>
-
-+#include <asm/tlbflush.h>
-+#include <asm/cpu.h>
-+
- asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
-
- static int hlt_counter;
-@@ -138,6 +142,34 @@
- }
- }
-
-+#ifdef CONFIG_HOTPLUG_CPU
-+#include <asm/nmi.h>
-+/* We don't actually take CPU down, just spin without interrupts. */
-+static inline void play_dead(void)
-+{
-+ /* Ack it */
-+ __get_cpu_var(cpu_state) = CPU_DEAD;
-+
-+ /* We shouldn't have to disable interrupts while dead, but
-+ * some interrupts just don't seem to go away, and this makes
-+ * it "work" for testing purposes. */
-+ /* Death loop */
-+ while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
-+ cpu_relax();
-+
-+ local_irq_disable();
-+ __flush_tlb_all();
-+ cpu_set(smp_processor_id(), cpu_online_map);
-+ enable_APIC_timer();
-+ local_irq_enable();
-+}
-+#else
-+static inline void play_dead(void)
-+{
-+ BUG();
-+}
-+#endif /* CONFIG_HOTPLUG_CPU */
-+
- /*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
-@@ -160,6 +192,9 @@
- if (!idle)
- idle = default_idle;
-
-+ if (cpu_is_offline(cpu))
-+ play_dead();
-+
- __get_cpu_var(irq_stat).idle_timestamp = jiffies;
- idle();
- }
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/smpboot.c
linux-2.6.12/arch/i386/kernel/smpboot.c
---- linux-2.6.12.orig/arch/i386/kernel/smpboot.c 2005-07-08
12:33:40.000000000 -0400
-+++ linux-2.6.12/arch/i386/kernel/smpboot.c 2005-07-08 12:34:10.000000000
-0400
-@@ -44,6 +44,9 @@
- #include <linux/smp_lock.h>
- #include <linux/irq.h>
- #include <linux/bootmem.h>
-+#include <linux/notifier.h>
-+#include <linux/cpu.h>
-+#include <linux/percpu.h>
-
- #include <linux/delay.h>
- #include <linux/mc146818rtc.h>
-@@ -90,6 +93,9 @@
-
- static void map_cpu_to_logical_apicid(void);
-
-+/* State of each CPU. */
-+DEFINE_PER_CPU(int, cpu_state) = { 0 };
-+
- /*
- * Currently trivial. Write the real->protected mode
- * bootstrap into the page concerned. The caller
-@@ -1107,6 +1113,9 @@
- who understands all this stuff should rewrite it properly. --RR 15/Jul/02
*/
- void __init smp_prepare_cpus(unsigned int max_cpus)
- {
-+ smp_commenced_mask = cpumask_of_cpu(0);
-+ cpu_callin_map = cpumask_of_cpu(0);
-+ mb();
- smp_boot_cpus(max_cpus);
- }
-
-@@ -1116,20 +1125,99 @@
- cpu_set(smp_processor_id(), cpu_callout_map);
- }
-
--int __devinit __cpu_up(unsigned int cpu)
-+#ifdef CONFIG_HOTPLUG_CPU
-+
-+/* must be called with the cpucontrol mutex held */
-+static int __devinit cpu_enable(unsigned int cpu)
- {
-- /* This only works at boot for x86. See "rewrite" above. */
-- if (cpu_isset(cpu, smp_commenced_mask)) {
-- local_irq_enable();
-- return -ENOSYS;
-+ /* get the target out of its holding state */
-+ per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
-+ wmb();
-+
-+ /* wait for the processor to ack it. timeout? */
-+ while (!cpu_online(cpu))
-+ cpu_relax();
-+
-+ fixup_irqs(cpu_online_map);
-+ /* counter the disable in fixup_irqs() */
-+ local_irq_enable();
-+ return 0;
-+}
-+
-+int __cpu_disable(void)
-+{
-+ cpumask_t map = cpu_online_map;
-+ int cpu = smp_processor_id();
-+
-+ /*
-+ * Perhaps use cpufreq to drop frequency, but that could go
-+ * into generic code.
-+ *
-+ * We won't take down the boot processor on i386 due to some
-+ * interrupts only being able to be serviced by the BSP.
-+ * Especially so if we're not using an IOAPIC -zwane
-+ */
-+ if (cpu == 0)
-+ return -EBUSY;
-+
-+ /* We enable the timer again on the exit path of the death loop */
-+ disable_APIC_timer();
-+ /* Allow any queued timer interrupts to get serviced */
-+ local_irq_enable();
-+ mdelay(1);
-+ local_irq_disable();
-+
-+ cpu_clear(cpu, map);
-+ fixup_irqs(map);
-+ /* It's now safe to remove this processor from the online map */
-+ cpu_clear(cpu, cpu_online_map);
-+ return 0;
-+}
-+
-+void __cpu_die(unsigned int cpu)
-+{
-+ /* We don't do anything here: idle task is faking death itself. */
-+ unsigned int i;
-+
-+ for (i = 0; i < 10; i++) {
-+ /* They ack this in play_dead by setting CPU_DEAD */
-+ if (per_cpu(cpu_state, cpu) == CPU_DEAD)
-+ return;
-+ current->state = TASK_UNINTERRUPTIBLE;
-+ schedule_timeout(HZ/10);
- }
-+ printk(KERN_ERR "CPU %u didn't die...\n", cpu);
-+}
-+#else /* ... !CONFIG_HOTPLUG_CPU */
-+int __cpu_disable(void)
-+{
-+ return -ENOSYS;
-+}
-
-+void __cpu_die(unsigned int cpu)
-+{
-+ /* We said "no" in __cpu_disable */
-+ BUG();
-+}
-+#endif /* CONFIG_HOTPLUG_CPU */
-+
-+int __devinit __cpu_up(unsigned int cpu)
-+{
- /* In case one didn't come up */
- if (!cpu_isset(cpu, cpu_callin_map)) {
-+ printk(KERN_DEBUG "skipping cpu%d, didn't come online\n", cpu);
- local_irq_enable();
- return -EIO;
- }
-
-+#ifdef CONFIG_HOTPLUG_CPU
-+ /* Already up, and in cpu_quiescent now? */
-+ if (cpu_isset(cpu, smp_commenced_mask)) {
-+ cpu_enable(cpu);
-+ return 0;
-+ }
-+#endif
-+
- local_irq_enable();
- /* Unleash the CPU! */
- cpu_set(cpu, smp_commenced_mask);
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/smp.c
linux-2.6.12/arch/i386/kernel/smp.c
---- linux-2.6.12.orig/arch/i386/kernel/smp.c 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/kernel/smp.c 2005-07-08 12:34:10.000000000
-0400
-@@ -19,6 +19,7 @@
- #include <linux/mc146818rtc.h>
- #include <linux/cache.h>
- #include <linux/interrupt.h>
-+#include <linux/cpu.h>
-
- #include <asm/mtrr.h>
- #include <asm/tlbflush.h>
-@@ -163,7 +164,7 @@
- unsigned long flags;
-
- local_irq_save(flags);
--
-+ WARN_ON(mask & ~cpus_addr(cpu_online_map)[0]);
- /*
- * Wait for idle.
- */
-@@ -345,21 +346,21 @@
- static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm,
- unsigned long va)
- {
-- cpumask_t tmp;
- /*
- * A couple of (to be removed) sanity checks:
- *
-- * - we do not send IPIs to not-yet booted CPUs.
- * - current CPU must not be in mask
- * - mask must exist :)
- */
- BUG_ON(cpus_empty(cpumask));
--
-- cpus_and(tmp, cpumask, cpu_online_map);
-- BUG_ON(!cpus_equal(cpumask, tmp));
- BUG_ON(cpu_isset(smp_processor_id(), cpumask));
- BUG_ON(!mm);
-
-+ /* If a CPU which we ran on has gone down, OK. */
-+ cpus_and(cpumask, cpumask, cpu_online_map);
-+ if (cpus_empty(cpumask))
-+ return;
-+
- /*
- * i'm not happy about this global shared spinlock in the
- * MM hot path, but we'll see how contended it is.
-@@ -474,6 +475,7 @@
- */
- void smp_send_reschedule(int cpu)
- {
-+ WARN_ON(cpu_is_offline(cpu));
- send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
- }
-
-@@ -514,10 +516,16 @@
- */
- {
- struct call_data_struct data;
-- int cpus = num_online_cpus()-1;
-+ int cpus;
-
-- if (!cpus)
-+ /* Holding any lock stops cpus from going down. */
-+ spin_lock(&call_lock);
-+ cpus = num_online_cpus()-1;
-+
-+ if (!cpus) {
-+ spin_unlock(&call_lock);
- return 0;
-+ }
-
- /* Can deadlock when called with interrupts disabled */
- WARN_ON(irqs_disabled());
-@@ -529,7 +537,6 @@
- if (wait)
- atomic_set(&data.finished, 0);
-
-- spin_lock(&call_lock);
- call_data = &data;
- mb();
-
-diff -Naur linux-2.6.12.orig/arch/i386/kernel/traps.c
linux-2.6.12/arch/i386/kernel/traps.c
---- linux-2.6.12.orig/arch/i386/kernel/traps.c 2005-07-08 12:33:40.000000000
-0400
-+++ linux-2.6.12/arch/i386/kernel/traps.c 2005-07-08 12:34:10.000000000
-0400
-@@ -624,6 +624,14 @@
- nmi_enter();
-
- cpu = smp_processor_id();
-+
-+#ifdef CONFIG_HOTPLUG_CPU
-+ if (!cpu_online(cpu)) {
-+ nmi_exit();
-+ return;
-+ }
-+#endif
-+
- ++nmi_count(cpu);
-
- if (!nmi_callback(regs, cpu))
-diff -Naur linux-2.6.12.orig/arch/ppc64/kernel/pSeries_smp.c
linux-2.6.12/arch/ppc64/kernel/pSeries_smp.c
---- linux-2.6.12.orig/arch/ppc64/kernel/pSeries_smp.c 2005-07-08
12:33:42.000000000 -0400
-+++ linux-2.6.12/arch/ppc64/kernel/pSeries_smp.c 2005-07-08
12:34:10.000000000 -0400
-@@ -92,10 +92,13 @@
-
- int pSeries_cpu_disable(void)
- {
-+ int cpu = smp_processor_id();
-+
-+ cpu_clear(cpu, cpu_online_map);
- systemcfg->processorCount--;
-
- /*fix boot_cpuid here*/
-- if (smp_processor_id() == boot_cpuid)
-+ if (cpu == boot_cpuid)
- boot_cpuid = any_online_cpu(cpu_online_map);
-
- /* FIXME: abstract this to not be platform specific later on */
-diff -Naur linux-2.6.12.orig/arch/s390/kernel/smp.c
linux-2.6.12/arch/s390/kernel/smp.c
---- linux-2.6.12.orig/arch/s390/kernel/smp.c 2005-07-08 12:33:42.000000000
-0400
-+++ linux-2.6.12/arch/s390/kernel/smp.c 2005-07-08 12:34:10.000000000
-0400
-@@ -679,12 +679,14 @@
- {
- unsigned long flags;
- ec_creg_mask_parms cr_parms;
-+ int cpu = smp_processor_id();
-
- spin_lock_irqsave(&smp_reserve_lock, flags);
-- if (smp_cpu_reserved[smp_processor_id()] != 0) {
-+ if (smp_cpu_reserved[cpu] != 0) {
- spin_unlock_irqrestore(&smp_reserve_lock, flags);
- return -EBUSY;
- }
-+ cpu_clear(cpu, cpu_online_map);
-
- #ifdef CONFIG_PFAULT
- /* Disable pfault pseudo page faults on this cpu. */
-diff -Naur linux-2.6.12.orig/include/asm-i386/cpu.h
linux-2.6.12/include/asm-i386/cpu.h
---- linux-2.6.12.orig/include/asm-i386/cpu.h 2005-07-08 12:33:58.000000000
-0400
-+++ linux-2.6.12/include/asm-i386/cpu.h 2005-07-08 12:34:10.000000000
-0400
-@@ -5,6 +5,7 @@
- #include <linux/cpu.h>
- #include <linux/topology.h>
- #include <linux/nodemask.h>
-+#include <linux/percpu.h>
-
- #include <asm/node.h>
-
-@@ -16,4 +17,5 @@
- extern void arch_unregister_cpu(int);
- #endif
-
-+DECLARE_PER_CPU(int, cpu_state);
- #endif /* _ASM_I386_CPU_H_ */
-diff -Naur linux-2.6.12.orig/include/asm-i386/irq.h
linux-2.6.12/include/asm-i386/irq.h
---- linux-2.6.12.orig/include/asm-i386/irq.h 2005-07-08 12:33:58.000000000
-0400
-+++ linux-2.6.12/include/asm-i386/irq.h 2005-07-08 12:34:10.000000000
-0400
-@@ -38,4 +38,8 @@
- extern int irqbalance_disable(char *str);
- #endif
-
-+#ifdef CONFIG_HOTPLUG_CPU
-+extern void fixup_irqs(cpumask_t map);
-+#endif
-+
- #endif /* _ASM_IRQ_H */
-diff -Naur linux-2.6.12.orig/include/asm-i386/smp.h
linux-2.6.12/include/asm-i386/smp.h
---- linux-2.6.12.orig/include/asm-i386/smp.h 2005-07-08 12:33:58.000000000
-0400
-+++ linux-2.6.12/include/asm-i386/smp.h 2005-07-08 12:34:10.000000000
-0400
-@@ -83,6 +83,9 @@
- }
-
- #endif
-+
-+extern int __cpu_disable(void);
-+extern void __cpu_die(unsigned int cpu);
- #endif /* !__ASSEMBLY__ */
-
- #define NO_PROC_ID 0xFF /* No processor magic marker */
-diff -Naur linux-2.6.12.orig/kernel/cpu.c linux-2.6.12/kernel/cpu.c
---- linux-2.6.12.orig/kernel/cpu.c 2005-07-08 12:33:26.000000000 -0400
-+++ linux-2.6.12/kernel/cpu.c 2005-07-08 12:34:10.000000000 -0400
-@@ -63,19 +63,15 @@
- {
- int err;
-
-- /* Take offline: makes arch_cpu_down somewhat easier. */
-- cpu_clear(smp_processor_id(), cpu_online_map);
--
- /* Ensure this CPU doesn't handle any more interrupts. */
- err = __cpu_disable();
- if (err < 0)
-- cpu_set(smp_processor_id(), cpu_online_map);
-- else
-- /* Force idle task to run as soon as we yield: it should
-- immediately notice cpu is offline and die quickly. */
-- sched_idle_next();
-+ return err;
-
-- return err;
-+ /* Force idle task to run as soon as we yield: it should
-+ immediately notice cpu is offline and die quickly. */
-+ sched_idle_next();
-+ return 0;
- }
-
- int cpu_down(unsigned int cpu)
diff -r 9a05a503897c -r 4b06313b9790
patches/linux-2.6.12/i386-mach-io-check-nmi.patch
--- a/patches/linux-2.6.12/i386-mach-io-check-nmi.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,43 +0,0 @@
---- ref-linux-2.6.12/arch/i386/kernel/traps.c 2005-12-19 09:23:44.000000000
+0000
-+++ linux-2.6.12-xen0/arch/i386/kernel/traps.c 2006-01-05 15:51:52.000000000
+0000
-@@ -521,18 +521,11 @@
-
- static void io_check_error(unsigned char reason, struct pt_regs * regs)
- {
-- unsigned long i;
--
- printk("NMI: IOCK error (debug interrupt?)\n");
- show_registers(regs);
-
- /* Re-enable the IOCK line, wait for a few seconds */
-- reason = (reason & 0xf) | 8;
-- outb(reason, 0x61);
-- i = 2000;
-- while (--i) udelay(1000);
-- reason &= ~8;
-- outb(reason, 0x61);
-+ clear_io_check_error(reason);
- }
-
- static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
---- ref-linux-2.6.12/include/asm-i386/mach-default/mach_traps.h
2005-06-17 20:48:29.000000000 +0100
-+++ linux-2.6.12-xen0/include/asm-i386/mach-default/mach_traps.h
2006-01-05 15:52:33.000000000 +0000
-@@ -15,6 +15,18 @@
- outb(reason, 0x61);
- }
-
-+static inline void clear_io_check_error(unsigned char reason)
-+{
-+ unsigned long i;
-+
-+ reason = (reason & 0xf) | 8;
-+ outb(reason, 0x61);
-+ i = 2000;
-+ while (--i) udelay(1000);
-+ reason &= ~8;
-+ outb(reason, 0x61);
-+}
-+
- static inline unsigned char get_nmi_reason(void)
- {
- return inb(0x61);
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/net-csum.patch
--- a/patches/linux-2.6.12/net-csum.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,56 +0,0 @@
-diff -ur linux-2.6.11/net/ipv4/netfilter/ip_conntrack_proto_udp.c
linux-2.6.11-csum/net/ipv4/netfilter/ip_conntrack_proto_udp.c
---- linux-2.6.11/net/ipv4/netfilter/ip_conntrack_proto_udp.c 2005-05-27
11:47:48 +01:00
-+++ linux-2.6.11-csum/net/ipv4/netfilter/ip_conntrack_proto_udp.c
2005-05-27 11:48:07 +01:00
-@@ -120,6 +120,7 @@
- * and moreover root might send raw packets.
- * FIXME: Source route IP option packets --RR */
- if (hooknum == NF_IP_PRE_ROUTING
-+ && skb->ip_summed != CHECKSUM_UNNECESSARY
- && csum_tcpudp_magic(iph->saddr, iph->daddr, udplen, IPPROTO_UDP,
- skb->ip_summed == CHECKSUM_HW ? skb->csum
- : skb_checksum(skb, iph->ihl*4, udplen, 0))) {
-
---- ../xen-unstable.hg/linux-2.6.12-xen0/net/ipv4/netfilter/ip_nat_proto_udp.c
2005-06-17 14:48:29.000000000 -0500
-+++ linux-2.6-xen-sparse/net/ipv4/netfilter/ip_nat_proto_udp.c 2005-10-14
15:17:53.000000000 -0500
-@@ -112,11 +112,19 @@ udp_manip_pkt(struct sk_buff **pskb,
- newport = tuple->dst.u.udp.port;
- portptr = &hdr->dest;
- }
-- if (hdr->check) /* 0 is a special case meaning no checksum */
-- hdr->check = ip_nat_cheat_check(~oldip, newip,
-+
-+ if (hdr->check) { /* 0 is a special case meaning no checksum */
-+ if ((*pskb)->proto_csum_blank) {
-+ hdr->check = ip_nat_cheat_check(oldip, ~newip,
-+ ip_nat_cheat_check(*portptr ^ 0xFFFF,
-+ newport, hdr->check));
-+ } else {
-+ hdr->check = ip_nat_cheat_check(~oldip, newip,
- ip_nat_cheat_check(*portptr ^ 0xFFFF,
- newport,
- hdr->check));
-+ }
-+ }
- *portptr = newport;
- return 1;
- }
---- ../xen-unstable.hg/linux-2.6.12-xen0/net/ipv4/netfilter/ip_nat_proto_tcp.c
2005-06-17 14:48:29.000000000 -0500
-+++ linux-2.6-xen-sparse/net/ipv4/netfilter/ip_nat_proto_tcp.c 2005-10-14
16:41:20.000000000 -0500
-@@ -127,10 +127,16 @@ tcp_manip_pkt(struct sk_buff **pskb,
- if (hdrsize < sizeof(*hdr))
- return 1;
-
-- hdr->check = ip_nat_cheat_check(~oldip, newip,
-+ if ((*pskb)->proto_csum_blank) {
-+ hdr->check = ip_nat_cheat_check(oldip, ~newip,
-+ ip_nat_cheat_check(oldport ^ 0xFFFF,
-+ newport, hdr->check));
-+ } else {
-+ hdr->check = ip_nat_cheat_check(~oldip, newip,
- ip_nat_cheat_check(oldport ^ 0xFFFF,
- newport,
- hdr->check));
-+ }
- return 1;
- }
-
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/pmd-shared.patch
--- a/patches/linux-2.6.12/pmd-shared.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,130 +0,0 @@
-diff -urNpP linux-2.6.12/arch/i386/mm/pageattr.c
linux-2.6.12.new/arch/i386/mm/pageattr.c
---- linux-2.6.12/arch/i386/mm/pageattr.c 2005-06-17 20:48:29.000000000
+0100
-+++ linux-2.6.12.new/arch/i386/mm/pageattr.c 2005-07-11 16:28:09.775165494
+0100
-@@ -75,7 +75,7 @@ static void set_pmd_pte(pte_t *kpte, uns
- unsigned long flags;
-
- set_pte_atomic(kpte, pte); /* change init_mm */
-- if (PTRS_PER_PMD > 1)
-+ if (HAVE_SHARED_KERNEL_PMD)
- return;
-
- spin_lock_irqsave(&pgd_lock, flags);
-diff -urNpP linux-2.6.12/arch/i386/mm/pgtable.c
linux-2.6.12.new/arch/i386/mm/pgtable.c
---- linux-2.6.12/arch/i386/mm/pgtable.c 2005-11-26 09:55:10.000000000
+0000
-+++ linux-2.6.12.new/arch/i386/mm/pgtable.c 2005-11-26 10:20:36.000000000
+0000
-@@ -199,19 +199,20 @@ void pgd_ctor(void *pgd, kmem_cache_t *c
- {
- unsigned long flags;
-
-- if (PTRS_PER_PMD == 1)
-+ if (PTRS_PER_PMD > 1) {
-+ if (HAVE_SHARED_KERNEL_PMD)
-+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
-+ swapper_pg_dir + USER_PTRS_PER_PGD,
-+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) *
sizeof(pgd_t));
-+ } else {
- spin_lock_irqsave(&pgd_lock, flags);
--
-- memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
-- swapper_pg_dir + USER_PTRS_PER_PGD,
-- (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
--
-- if (PTRS_PER_PMD > 1)
-- return;
--
-- pgd_list_add(pgd);
-- spin_unlock_irqrestore(&pgd_lock, flags);
-- memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
-+ memcpy((pgd_t *)pgd + USER_PTRS_PER_PGD,
-+ swapper_pg_dir + USER_PTRS_PER_PGD,
-+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
-+ memset(pgd, 0, USER_PTRS_PER_PGD*sizeof(pgd_t));
-+ pgd_list_add(pgd);
-+ spin_unlock_irqrestore(&pgd_lock, flags);
-+ }
- }
-
- /* never called when PTRS_PER_PMD > 1 */
-@@ -238,6 +239,30 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
- goto out_oom;
- set_pgd(&pgd[i], __pgd(1 + __pa(pmd)));
- }
-+
-+ if (!HAVE_SHARED_KERNEL_PMD) {
-+ unsigned long flags;
-+
-+ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
-+ pmd_t *pmd = kmem_cache_alloc(pmd_cache, GFP_KERNEL);
-+ if (!pmd)
-+ goto out_oom;
-+ set_pgd(&pgd[USER_PTRS_PER_PGD], __pgd(1 + __pa(pmd)));
-+ }
-+
-+ spin_lock_irqsave(&pgd_lock, flags);
-+ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
-+ unsigned long v = (unsigned long)i << PGDIR_SHIFT;
-+ pgd_t *kpgd = pgd_offset_k(v);
-+ pud_t *kpud = pud_offset(kpgd, v);
-+ pmd_t *kpmd = pmd_offset(kpud, v);
-+ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
-+ memcpy(pmd, kpmd, PAGE_SIZE);
-+ }
-+ pgd_list_add(pgd);
-+ spin_unlock_irqrestore(&pgd_lock, flags);
-+ }
-+
- return pgd;
-
- out_oom:
-@@ -252,9 +277,23 @@ void pgd_free(pgd_t *pgd)
- int i;
-
- /* in the PAE case user pgd entries are overwritten before usage */
-- if (PTRS_PER_PMD > 1)
-- for (i = 0; i < USER_PTRS_PER_PGD; ++i)
-- kmem_cache_free(pmd_cache, (void
*)__va(pgd_val(pgd[i])-1));
-+ if (PTRS_PER_PMD > 1) {
-+ for (i = 0; i < USER_PTRS_PER_PGD; ++i) {
-+ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
-+ kmem_cache_free(pmd_cache, pmd);
-+ }
-+ if (!HAVE_SHARED_KERNEL_PMD) {
-+ unsigned long flags;
-+ spin_lock_irqsave(&pgd_lock, flags);
-+ pgd_list_del(pgd);
-+ spin_unlock_irqrestore(&pgd_lock, flags);
-+ for (i = USER_PTRS_PER_PGD; i < PTRS_PER_PGD; i++) {
-+ pmd_t *pmd = (void *)__va(pgd_val(pgd[i])-1);
-+ memset(pmd, 0, PTRS_PER_PMD*sizeof(pmd_t));
-+ kmem_cache_free(pmd_cache, pmd);
-+ }
-+ }
-+ }
- /* in the non-PAE case, free_pgtables() clears user pgd entries */
- kmem_cache_free(pgd_cache, pgd);
- }
-diff -urNpP linux-2.6.12/include/asm-i386/pgtable-2level-defs.h
linux-2.6.12.new/include/asm-i386/pgtable-2level-defs.h
---- linux-2.6.12/include/asm-i386/pgtable-2level-defs.h 2005-06-17
20:48:29.000000000 +0100
-+++ linux-2.6.12.new/include/asm-i386/pgtable-2level-defs.h 2005-07-11
16:28:09.733164251 +0100
-@@ -1,6 +1,8 @@
- #ifndef _I386_PGTABLE_2LEVEL_DEFS_H
- #define _I386_PGTABLE_2LEVEL_DEFS_H
-
-+#define HAVE_SHARED_KERNEL_PMD 0
-+
- /*
- * traditional i386 two-level paging structure:
- */
-diff -urNpP linux-2.6.12/include/asm-i386/pgtable-3level-defs.h
linux-2.6.12.new/include/asm-i386/pgtable-3level-defs.h
---- linux-2.6.12/include/asm-i386/pgtable-3level-defs.h 2005-06-17
20:48:29.000000000 +0100
-+++ linux-2.6.12.new/include/asm-i386/pgtable-3level-defs.h 2005-07-11
16:28:09.755164902 +0100
-@@ -1,6 +1,8 @@
- #ifndef _I386_PGTABLE_3LEVEL_DEFS_H
- #define _I386_PGTABLE_3LEVEL_DEFS_H
-
-+#define HAVE_SHARED_KERNEL_PMD 1
-+
- /*
- * PGDIR_SHIFT determines what a top-level page table entry can map
- */
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/rcu-nohz.patch
--- a/patches/linux-2.6.12/rcu-nohz.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,16 +0,0 @@
-diff -ur linux-2.6.11/kernel/rcupdate.c linux-2.6.11-rcu/kernel/rcupdate.c
---- linux-2.6.11/kernel/rcupdate.c 2005-05-30 10:51:41 +01:00
-+++ linux-2.6.11-rcu/kernel/rcupdate.c 2005-05-30 10:53:53 +01:00
-@@ -202,8 +202,11 @@
- */
- static void cpu_quiet(int cpu, struct rcu_ctrlblk *rcp, struct rcu_state *rsp)
- {
-+ cpumask_t mask;
-+
- cpu_clear(cpu, rsp->cpumask);
-- if (cpus_empty(rsp->cpumask)) {
-+ cpus_andnot(mask, rsp->cpumask, nohz_cpu_mask);
-+ if (cpus_empty(mask)) {
- /* batch completed ! */
- rcp->completed = rcp->cur;
- rcu_start_batch(rcp, rsp, 0);
diff -r 9a05a503897c -r 4b06313b9790 patches/linux-2.6.12/smp-alts.patch
--- a/patches/linux-2.6.12/smp-alts.patch Tue Jan 31 18:55:55 2006
+++ /dev/null Tue Jan 31 19:55:22 2006
@@ -1,563 +0,0 @@
-diff -Naur linux-2.6.12/arch/i386/Kconfig linux-2.6.12.post/arch/i386/Kconfig
---- linux-2.6.12/arch/i386/Kconfig 2005-06-17 15:48:29.000000000 -0400
-+++ linux-2.6.12.post/arch/i386/Kconfig 2005-07-25 05:51:21.000000000
-0400
-@@ -487,6 +487,19 @@
-
- If you don't know what to do here, say N.
-
-+config SMP_ALTERNATIVES
-+ bool "SMP alternatives support (EXPERIMENTAL)"
-+ depends on SMP && EXPERIMENTAL
-+ help
-+ Try to reduce the overhead of running an SMP kernel on a uniprocessor
-+ host slightly by replacing certain key instruction sequences
-+ according to whether we currently have more than one CPU available.
-+ This should provide a noticeable boost to performance when
-+ running SMP kernels on UP machines, and have negligible impact
-+ when running on an true SMP host.
-+
-+ If unsure, say N.
-+
- config NR_CPUS
- int "Maximum number of CPUs (2-255)"
- range 2 255
-diff -Naur linux-2.6.12/arch/i386/kernel/Makefile
linux-2.6.12.post/arch/i386/kernel/Makefile
---- linux-2.6.12/arch/i386/kernel/Makefile 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/arch/i386/kernel/Makefile 2005-07-25
05:51:21.000000000 -0400
-@@ -33,6 +33,7 @@
- obj-$(CONFIG_HPET_TIMER) += time_hpet.o
- obj-$(CONFIG_EFI) += efi.o efi_stub.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+obj-$(CONFIG_SMP_ALTERNATIVES) += smpalts.o
-
- EXTRA_AFLAGS := -traditional
-
-diff -Naur linux-2.6.12/arch/i386/kernel/smpalts.c
linux-2.6.12.post/arch/i386/kernel/smpalts.c
---- linux-2.6.12/arch/i386/kernel/smpalts.c 1969-12-31 19:00:00.000000000
-0500
-+++ linux-2.6.12.post/arch/i386/kernel/smpalts.c 2005-07-25
05:51:21.000000000 -0400
-@@ -0,0 +1,85 @@
-+#include <linux/kernel.h>
-+#include <asm/system.h>
-+#include <asm/smp_alt.h>
-+#include <asm/processor.h>
-+#include <asm/string.h>
-+
-+struct smp_replacement_record {
-+ unsigned char targ_size;
-+ unsigned char smp1_size;
-+ unsigned char smp2_size;
-+ unsigned char up_size;
-+ unsigned char feature;
-+ unsigned char data[0];
-+};
-+
-+struct smp_alternative_record {
-+ void *targ_start;
-+ struct smp_replacement_record *repl;
-+};
-+
-+extern struct smp_alternative_record __start_smp_alternatives_table,
-+ __stop_smp_alternatives_table;
-+extern unsigned long __init_begin, __init_end;
-+
-+void prepare_for_smp(void)
-+{
-+ struct smp_alternative_record *r;
-+ printk(KERN_INFO "Enabling SMP...\n");
-+ for (r = &__start_smp_alternatives_table;
-+ r != &__stop_smp_alternatives_table;
-+ r++) {
-+ BUG_ON(r->repl->targ_size < r->repl->smp1_size);
-+ BUG_ON(r->repl->targ_size < r->repl->smp2_size);
-+ BUG_ON(r->repl->targ_size < r->repl->up_size);
-+ if (system_state == SYSTEM_RUNNING &&
-+ r->targ_start >= (void *)&__init_begin &&
-+ r->targ_start < (void *)&__init_end)
-+ continue;
-+ if (r->repl->feature != (unsigned char)-1 &&
-+ boot_cpu_has(r->repl->feature)) {
-+ memcpy(r->targ_start,
-+ r->repl->data + r->repl->smp1_size,
-+ r->repl->smp2_size);
-+ memset(r->targ_start + r->repl->smp2_size,
-+ 0x90,
-+ r->repl->targ_size - r->repl->smp2_size);
-+ } else {
-+ memcpy(r->targ_start,
-+ r->repl->data,
-+ r->repl->smp1_size);
-+ memset(r->targ_start + r->repl->smp1_size,
-+ 0x90,
-+ r->repl->targ_size - r->repl->smp1_size);
-+ }
-+ }
-+ /* Paranoia */
-+ asm volatile ("jmp 1f\n1:");
-+ mb();
-+}
-+
-+void unprepare_for_smp(void)
-+{
-+ struct smp_alternative_record *r;
-+ printk(KERN_INFO "Disabling SMP...\n");
-+ for (r = &__start_smp_alternatives_table;
-+ r != &__stop_smp_alternatives_table;
-+ r++) {
-+ BUG_ON(r->repl->targ_size < r->repl->smp1_size);
-+ BUG_ON(r->repl->targ_size < r->repl->smp2_size);
-+ BUG_ON(r->repl->targ_size < r->repl->up_size);
-+ if (system_state == SYSTEM_RUNNING &&
-+ r->targ_start >= (void *)&__init_begin &&
-+ r->targ_start < (void *)&__init_end)
-+ continue;
-+ memcpy(r->targ_start,
-+ r->repl->data + r->repl->smp1_size + r->repl->smp2_size,
-+ r->repl->up_size);
-+ memset(r->targ_start + r->repl->up_size,
-+ 0x90,
-+ r->repl->targ_size - r->repl->up_size);
-+ }
-+ /* Paranoia */
-+ asm volatile ("jmp 1f\n1:");
-+ mb();
-+}
-diff -Naur linux-2.6.12/arch/i386/kernel/smpboot.c
linux-2.6.12.post/arch/i386/kernel/smpboot.c
---- linux-2.6.12/arch/i386/kernel/smpboot.c 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/arch/i386/kernel/smpboot.c 2005-07-25
05:51:21.000000000 -0400
-@@ -1001,6 +1001,11 @@
- if (max_cpus <= cpucount+1)
- continue;
-
-+#ifdef CONFIG_SMP_ALTERNATIVES
-+ if (kicked == 1)
-+ prepare_for_smp();
-+#endif
-+
- if (do_boot_cpu(apicid))
- printk("CPU #%d not responding - cannot use it.\n",
- apicid);
-@@ -1130,6 +1135,11 @@
- return -EIO;
- }
-
-+#ifdef CONFIG_SMP_ALTERNATIVES
-+ if (num_online_cpus() == 1)
-+ prepare_for_smp();
-+#endif
-+
- local_irq_enable();
- /* Unleash the CPU! */
- cpu_set(cpu, smp_commenced_mask);
-diff -Naur linux-2.6.12/arch/i386/kernel/vmlinux.lds.S
linux-2.6.12.post/arch/i386/kernel/vmlinux.lds.S
---- linux-2.6.12/arch/i386/kernel/vmlinux.lds.S 2005-06-17
15:48:29.000000000 -0400
-+++ linux-2.6.12.post/arch/i386/kernel/vmlinux.lds.S 2005-07-25
05:51:21.000000000 -0400
-@@ -30,6 +30,13 @@
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
-+ . = ALIGN(16);
-+ __start_smp_alternatives_table = .;
-+ __smp_alternatives : { *(__smp_alternatives) }
-+ __stop_smp_alternatives_table = .;
-+
-+ __smp_replacements : { *(__smp_replacements) }
-+
- RODATA
-
- /* writeable */
-diff -Naur linux-2.6.12/include/asm-i386/atomic.h
linux-2.6.12.post/include/asm-i386/atomic.h
---- linux-2.6.12/include/asm-i386/atomic.h 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/include/asm-i386/atomic.h 2005-07-25
05:51:21.000000000 -0400
-@@ -4,18 +4,13 @@
- #include <linux/config.h>
- #include <linux/compiler.h>
- #include <asm/processor.h>
-+#include <asm/smp_alt.h>
-
- /*
- * Atomic operations that C can't guarantee us. Useful for
- * resource counting etc..
- */
-
--#ifdef CONFIG_SMP
--#define LOCK "lock ; "
--#else
--#define LOCK ""
--#endif
--
- /*
- * Make sure gcc doesn't try to be clever and move things around
- * on us. We need to use _exactly_ the address the user gave us,
-diff -Naur linux-2.6.12/include/asm-i386/bitops.h
linux-2.6.12.post/include/asm-i386/bitops.h
---- linux-2.6.12/include/asm-i386/bitops.h 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/include/asm-i386/bitops.h 2005-07-25
05:51:21.000000000 -0400
-@@ -7,6 +7,7 @@
-
- #include <linux/config.h>
- #include <linux/compiler.h>
-+#include <asm/smp_alt.h>
-
- /*
- * These have to be done with inline assembly: that way the bit-setting
-@@ -16,12 +17,6 @@
- * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
- */
-
--#ifdef CONFIG_SMP
--#define LOCK_PREFIX "lock ; "
--#else
--#define LOCK_PREFIX ""
--#endif
--
- #define ADDR (*(volatile long *) addr)
-
- /**
-@@ -41,7 +36,7 @@
- */
- static inline void set_bit(int nr, volatile unsigned long * addr)
- {
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btsl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-@@ -76,7 +71,7 @@
- */
- static inline void clear_bit(int nr, volatile unsigned long * addr)
- {
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btrl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-@@ -121,7 +116,7 @@
- */
- static inline void change_bit(int nr, volatile unsigned long * addr)
- {
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btcl %1,%0"
- :"=m" (ADDR)
- :"Ir" (nr));
-@@ -140,7 +135,7 @@
- {
- int oldbit;
-
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btsl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
-@@ -180,7 +175,7 @@
- {
- int oldbit;
-
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btrl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
-@@ -231,7 +226,7 @@
- {
- int oldbit;
-
-- __asm__ __volatile__( LOCK_PREFIX
-+ __asm__ __volatile__( LOCK
- "btcl %2,%1\n\tsbbl %0,%0"
- :"=r" (oldbit),"=m" (ADDR)
- :"Ir" (nr) : "memory");
-diff -Naur linux-2.6.12/include/asm-i386/rwsem.h
linux-2.6.12.post/include/asm-i386/rwsem.h
---- linux-2.6.12/include/asm-i386/rwsem.h 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/include/asm-i386/rwsem.h 2005-07-25 05:51:21.000000000
-0400
-@@ -40,6 +40,7 @@
-
- #include <linux/list.h>
- #include <linux/spinlock.h>
-+#include <asm/smp_alt.h>
-
- struct rwsem_waiter;
-
-@@ -99,7 +100,7 @@
- {
- __asm__ __volatile__(
- "# beginning down_read\n\t"
--LOCK_PREFIX " incl (%%eax)\n\t" /* adds 0x00000001, returns the old
value */
-+LOCK " incl (%%eax)\n\t" /* adds 0x00000001, returns the old
value */
- " js 2f\n\t" /* jump if we weren't granted the lock */
- "1:\n\t"
- LOCK_SECTION_START("")
-@@ -130,7 +131,7 @@
- " movl %1,%2\n\t"
- " addl %3,%2\n\t"
- " jle 2f\n\t"
--LOCK_PREFIX " cmpxchgl %2,%0\n\t"
-+LOCK " cmpxchgl %2,%0\n\t"
- " jnz 1b\n\t"
- "2:\n\t"
- "# ending __down_read_trylock\n\t"
-@@ -150,7 +151,7 @@
- tmp = RWSEM_ACTIVE_WRITE_BIAS;
- __asm__ __volatile__(
- "# beginning down_write\n\t"
--LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns
the old value */
-+LOCK " xadd %%edx,(%%eax)\n\t" /* subtract 0x0000ffff, returns
the old value */
- " testl %%edx,%%edx\n\t" /* was the count 0 before? */
- " jnz 2f\n\t" /* jump if we weren't granted the lock */
- "1:\n\t"
-@@ -188,7 +189,7 @@
- __s32 tmp = -RWSEM_ACTIVE_READ_BIAS;
- __asm__ __volatile__(
- "# beginning __up_read\n\t"
--LOCK_PREFIX " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old
value */
-+LOCK " xadd %%edx,(%%eax)\n\t" /* subtracts 1, returns the old
value */
- " js 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
-@@ -214,7 +215,7 @@
- __asm__ __volatile__(
- "# beginning __up_write\n\t"
- " movl %2,%%edx\n\t"
--LOCK_PREFIX " xaddl %%edx,(%%eax)\n\t" /* tries to transition
0xffff0001 -> 0x00000000 */
-+LOCK " xaddl %%edx,(%%eax)\n\t" /* tries to transition
0xffff0001 -> 0x00000000 */
- " jnz 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
-@@ -239,7 +240,7 @@
- {
- __asm__ __volatile__(
- "# beginning __downgrade_write\n\t"
--LOCK_PREFIX " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 ->
0xYYYY0001 */
-+LOCK " addl %2,(%%eax)\n\t" /* transitions 0xZZZZ0001 ->
0xYYYY0001 */
- " js 2f\n\t" /* jump if the lock is being waited upon */
- "1:\n\t"
- LOCK_SECTION_START("")
-@@ -263,7 +264,7 @@
- static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
- {
- __asm__ __volatile__(
--LOCK_PREFIX "addl %1,%0"
-+LOCK "addl %1,%0"
- : "=m"(sem->count)
- : "ir"(delta), "m"(sem->count));
- }
-@@ -276,7 +277,7 @@
- int tmp = delta;
-
- __asm__ __volatile__(
--LOCK_PREFIX "xadd %0,(%2)"
-+LOCK "xadd %0,(%2)"
- : "+r"(tmp), "=m"(sem->count)
- : "r"(sem), "m"(sem->count)
- : "memory");
-diff -Naur linux-2.6.12/include/asm-i386/smp_alt.h
linux-2.6.12.post/include/asm-i386/smp_alt.h
---- linux-2.6.12/include/asm-i386/smp_alt.h 1969-12-31 19:00:00.000000000
-0500
-+++ linux-2.6.12.post/include/asm-i386/smp_alt.h 2005-07-25
05:51:21.000000000 -0400
-@@ -0,0 +1,32 @@
-+#ifndef __ASM_SMP_ALT_H__
-+#define __ASM_SMP_ALT_H__
-+
-+#include <linux/config.h>
-+
-+#ifdef CONFIG_SMP
-+#if defined(CONFIG_SMP_ALTERNATIVES) && !defined(MODULE)
-+#define LOCK \
-+ "6677: nop\n" \
-+ ".section __smp_alternatives,\"a\"\n" \
-+ ".long 6677b\n" \
-+ ".long 6678f\n" \
-+ ".previous\n" \
-+ ".section __smp_replacements,\"a\"\n" \
-+ "6678: .byte 1\n" \
-+ ".byte 1\n" \
-+ ".byte 0\n" \
-+ ".byte 1\n" \
-+ ".byte -1\n" \
-+ "lock\n" \
-+ "nop\n" \
-+ ".previous\n"
-+void prepare_for_smp(void);
-+void unprepare_for_smp(void);
-+#else
-+#define LOCK "lock ; "
-+#endif
-+#else
-+#define LOCK ""
-+#endif
-+
-+#endif /* __ASM_SMP_ALT_H__ */
-diff -Naur linux-2.6.12/include/asm-i386/spinlock.h
linux-2.6.12.post/include/asm-i386/spinlock.h
---- linux-2.6.12/include/asm-i386/spinlock.h 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/include/asm-i386/spinlock.h 2005-07-25
05:51:21.000000000 -0400
-@@ -6,6 +6,7 @@
- #include <asm/page.h>
- #include <linux/config.h>
- #include <linux/compiler.h>
-+#include <asm/smp_alt.h>
-
- asmlinkage int printk(const char * fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
-@@ -47,8 +48,9 @@
- #define spin_unlock_wait(x) do { barrier(); } while(spin_is_locked(x))
-
- #define spin_lock_string \
-- "\n1:\t" \
-- "lock ; decb %0\n\t" \
-+ "1:\n" \
-+ LOCK \
-+ "decb %0\n\t" \
- "jns 3f\n" \
- "2:\t" \
- "rep;nop\n\t" \
-@@ -58,8 +60,9 @@
- "3:\n\t"
-
- #define spin_lock_string_flags \
-- "\n1:\t" \
-- "lock ; decb %0\n\t" \
-+ "1:\n" \
-+ LOCK \
-+ "decb %0\n\t" \
- "jns 4f\n\t" \
- "2:\t" \
- "testl $0x200, %1\n\t" \
-@@ -121,10 +124,34 @@
- static inline int _raw_spin_trylock(spinlock_t *lock)
- {
- char oldval;
-+#ifdef CONFIG_SMP_ALTERNATIVES
- __asm__ __volatile__(
-- "xchgb %b0,%1"
-+ "1:movb %1,%b0\n"
-+ "movb $0,%1\n"
-+ "2:"
-+ ".section __smp_alternatives,\"a\"\n"
-+ ".long 1b\n"
-+ ".long 3f\n"
-+ ".previous\n"
-+ ".section __smp_replacements,\"a\"\n"
-+ "3: .byte 2b - 1b\n"
-+ ".byte 5f-4f\n"
-+ ".byte 0\n"
-+ ".byte 6f-5f\n"
-+ ".byte -1\n"
-+ "4: xchgb %b0,%1\n"
-+ "5: movb %1,%b0\n"
-+ "movb $0,%1\n"
-+ "6:\n"
-+ ".previous\n"
- :"=q" (oldval), "=m" (lock->slock)
- :"0" (0) : "memory");
-+#else
-+ __asm__ __volatile__(
-+ "xchgb %b0,%1\n"
-+ :"=q" (oldval), "=m" (lock->slock)
-+ :"0" (0) : "memory");
-+#endif
- return oldval > 0;
- }
-
-@@ -225,8 +252,8 @@
- __build_write_lock(rw, "__write_lock_failed");
- }
-
--#define _raw_read_unlock(rw) asm volatile("lock ; incl %0" :"=m"
((rw)->lock) : : "memory")
--#define _raw_write_unlock(rw) asm volatile("lock ; addl $" RW_LOCK_BIAS_STR
",%0":"=m" ((rw)->lock) : : "memory")
-+#define _raw_read_unlock(rw) asm volatile(LOCK "incl %0" :"=m" ((rw)->lock)
: : "memory")
-+#define _raw_write_unlock(rw) asm volatile(LOCK "addl $" RW_LOCK_BIAS_STR
",%0":"=m" ((rw)->lock) : : "memory")
-
- static inline int _raw_read_trylock(rwlock_t *lock)
- {
-diff -Naur linux-2.6.12/include/asm-i386/system.h
linux-2.6.12.post/include/asm-i386/system.h
---- linux-2.6.12/include/asm-i386/system.h 2005-06-17 15:48:29.000000000
-0400
-+++ linux-2.6.12.post/include/asm-i386/system.h 2005-07-25
05:51:21.000000000 -0400
-@@ -5,7 +5,7 @@
- #include <linux/kernel.h>
- #include <asm/segment.h>
- #include <asm/cpufeature.h>
--#include <linux/bitops.h> /* for LOCK_PREFIX */
-+#include <asm/smp_alt.h>
-
- #ifdef __KERNEL__
-
-@@ -249,19 +249,19 @@
- unsigned long prev;
- switch (size) {
- case 1:
-- __asm__ __volatile__(LOCK_PREFIX "cmpxchgb %b1,%2"
-+ __asm__ __volatile__(LOCK "cmpxchgb %b1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
- return prev;
- case 2:
-- __asm__ __volatile__(LOCK_PREFIX "cmpxchgw %w1,%2"
-+ __asm__ __volatile__(LOCK "cmpxchgw %w1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
- return prev;
- case 4:
-- __asm__ __volatile__(LOCK_PREFIX "cmpxchgl %1,%2"
-+ __asm__ __volatile__(LOCK "cmpxchgl %1,%2"
- : "=a"(prev)
- : "q"(new), "m"(*__xg(ptr)), "0"(old)
- : "memory");
-@@ -425,11 +425,55 @@
- #endif
-
- #ifdef CONFIG_SMP
--#define smp_mb() mb()
--#define smp_rmb() rmb()
- #define smp_wmb() wmb()
--#define smp_read_barrier_depends() read_barrier_depends()
-+#if defined(CONFIG_SMP_ALTERNATIVES) && !defined(MODULE)
-+#define smp_alt_mb(instr) \
-+__asm__ __volatile__("6667:\nnop\nnop\nnop\nnop\nnop\nnop\n6668:\n" \
-+ ".section __smp_alternatives,\"a\"\n" \
-+ ".long 6667b\n" \
-+ ".long 6673f\n" \
-+ ".previous\n" \
-+ ".section __smp_replacements,\"a\"\n" \
-+ "6673:.byte 6668b-6667b\n" \
-+ ".byte 6670f-6669f\n" \
-+ ".byte 6671f-6670f\n" \
-+ ".byte 0\n" \
-+ ".byte %c0\n" \
-+ "6669:lock;addl $0,0(%%esp)\n" \
-+ "6670:" instr "\n" \
-+ "6671:\n" \
-+ ".previous\n" \
-+ : \
-+ : "i" (X86_FEATURE_XMM2) \
-+ : "memory")
-+#define smp_rmb() smp_alt_mb("lfence")
-+#define smp_mb() smp_alt_mb("mfence")
-+#define set_mb(var, value) do { \
-+unsigned long __set_mb_temp; \
-+__asm__ __volatile__("6667:movl %1, %0\n6668:\n" \
-+ ".section __smp_alternatives,\"a\"\n" \
-+ ".long 6667b\n" \
-+ ".long 6673f\n" \
-+ ".previous\n" \
-+ ".section __smp_replacements,\"a\"\n" \
-+ "6673: .byte 6668b-6667b\n" \
-+ ".byte 6670f-6669f\n" \
-+ ".byte 0\n" \
-+ ".byte 6671f-6670f\n" \
-+ ".byte -1\n" \
-+ "6669: xchg %1, %0\n" \
-+ "6670:movl %1, %0\n" \
-+ "6671:\n" \
-+ ".previous\n" \
-+ : "=m" (var), "=r" (__set_mb_temp) \
-+ : "1" (value) \
-+ : "memory"); } while (0)
-+#else
-+#define smp_rmb() rmb()
-+#define smp_mb() mb()
- #define set_mb(var, value) do { xchg(&var, value); } while (0)
-+#endif
-+#define smp_read_barrier_depends() read_barrier_depends()
- #else
- #define smp_mb() barrier()
- #define smp_rmb() barrier()
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |