|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen-unstable] [HVM] Revert cset 13103 for now, as it is causing boot errors.
# HG changeset patch
# User Tim Deegan <Tim.Deegan@xxxxxxxxxxxxx>
# Date 1166828267 0
# Node ID 132559289b46b9b0ac12b4646c30f1aae28a40e0
# Parent 8c6e20c6056329dedcfb333b67945562955c23a3
[HVM] Revert cset 13103 for now, as it is causing boot errors.
Signed-off-by: Tim Deegan <Tim.Deegan@xxxxxxxxxxxxx>
---
tools/firmware/rombios/rombios.c | 441 ++++++++++++++-------------------------
tools/ioemu/hw/pc.c | 2
tools/ioemu/vl.c | 2
3 files changed, 165 insertions(+), 280 deletions(-)
diff -r 8c6e20c60563 -r 132559289b46 tools/firmware/rombios/rombios.c
--- a/tools/firmware/rombios/rombios.c Fri Dec 22 11:58:22 2006 +0000
+++ b/tools/firmware/rombios/rombios.c Fri Dec 22 22:57:47 2006 +0000
@@ -278,6 +278,7 @@ typedef unsigned short bx_bool;
typedef unsigned short bx_bool;
typedef unsigned long Bit32u;
+#if BX_USE_ATADRV
void memsetb(seg,offset,value,count);
void memcpyb(dseg,doffset,sseg,soffset,count);
@@ -417,6 +418,7 @@ typedef unsigned long Bit32u;
ASM_END
}
#endif
+#endif //BX_USE_ATADRV
// read_dword and write_dword functions
static Bit32u read_dword();
@@ -883,7 +885,7 @@ static void int15_function();
static void int15_function();
static void int16_function();
static void int17_function();
-static void int19_function();
+static Bit32u int19_function();
static void int1a_function();
static void int70_function();
static void int74_function();
@@ -1845,99 +1847,28 @@ print_bios_banner()
printf("\n");
}
-
-//--------------------------------------------------------------------------
-// BIOS Boot Specification 1.0.1 compatibility
-//
-// Very basic support for the BIOS Boot Specification, which allows expansion
-// ROMs to register themselves as boot devices, instead of just stealing the
-// INT 19h boot vector.
-//
-// This is a hack: to do it properly requires a proper PnP BIOS and we aren't
-// one; we just lie to the option ROMs to make them behave correctly.
-// We also don't support letting option ROMs register as bootable disk
-// drives (BCVs), only as bootable devices (BEVs).
-//
-//
http://www.phoenix.com/en/Customer+Services/White+Papers-Specs/pc+industry+specifications.htm
-//--------------------------------------------------------------------------
-
-/* 256 bytes at 0x0600 -- 0x06ff is used for the IPL boot table. This
- * ought really to be in NVRAM somewhere where a failed boot attempt can't
- * corrupt it. */
-#define IPL_SEG 0x0060
-#define IPL_TABLE_OFFSET 0x0000
-#define IPL_TABLE_ENTRIES 8
-#define IPL_COUNT_OFFSET 0x0080
-
-struct ipl_entry {
- Bit16u type;
- Bit16u flags;
- Bit32u vector;
- Bit32u description;
- Bit32u reserved;
-};
-
-static void
-init_boot_vectors()
-{
- struct ipl_entry e;
- Bit16u count = 0;
- Bit16u ss = get_SS();
-
- /* Clear out the IPL table. */
- memsetb(IPL_SEG, IPL_TABLE_OFFSET, 0, 0xff);
-
- /* Floppy drive */
- e.type = 1; e.flags = 0; e.vector = 0; e.description = 0; e.reserved = 0;
- memcpyb(IPL_SEG, IPL_TABLE_OFFSET + count * sizeof (e), ss, &e, sizeof (e));
- count++;
-
- /* First HDD */
- e.type = 2; e.flags = 0; e.vector = 0; e.description = 0; e.reserved = 0;
- memcpyb(IPL_SEG, IPL_TABLE_OFFSET + count * sizeof (e), ss, &e, sizeof (e));
- count++;
-
-#if BX_ELTORITO_BOOT
- /* CDROM */
- e.type = 3; e.flags = 0; e.vector = 0; e.description = 0; e.reserved = 0;
- memcpyb(IPL_SEG, IPL_TABLE_OFFSET + count * sizeof (e), ss, &e, sizeof (e));
- count++;
-#endif
-
- /* Remember how many devices we have */
- write_word(IPL_SEG, IPL_COUNT_OFFSET, count);
-}
-
-static Bit8u
-get_boot_vector(i, e)
-Bit16u i; struct ipl_entry *e;
-{
- Bit16u count;
- Bit16u ss = get_SS();
- /* Get the count of boot devices, and refuse to overrun the array */
- count = read_word(IPL_SEG, IPL_COUNT_OFFSET);
- if (i >= count) return 0;
- /* OK to read this device */
- memcpyb(ss, e, IPL_SEG, IPL_TABLE_OFFSET + i * sizeof (*e), sizeof (*e));
- return 1;
-}
-
-
//--------------------------------------------------------------------------
// print_boot_device
// displays the boot device
//--------------------------------------------------------------------------
-static char drivetypes[][10]={"", "Floppy","Hard Disk","CD-Rom", "Network"};
+static char drivetypes[][10]={"Floppy","Hard Disk","CD-Rom"};
void
-print_boot_device(type)
- Bit16u type;
+print_boot_device(cdboot, drive)
+ Bit8u cdboot; Bit16u drive;
{
- /* NIC appears as type 0x80 */
- if (type == 0x80 ) type = 0x4;
- if (type == 0 || type > 0x4) BX_PANIC("Bad drive type\n");
- printf("Booting from %s...\n", drivetypes[type]);
+ Bit8u i;
+
+ // cdboot contains 0 if floppy/harddisk, 1 otherwise
+ // drive contains real/emulated boot drive
+
+ if(cdboot)i=2; // CD-Rom
+ else if((drive&0x0080)==0x00)i=0; // Floppy
+ else if((drive&0x0080)==0x80)i=1; // Hard drive
+ else return;
+
+ printf("Booting from %s...\n",drivetypes[i]);
}
//--------------------------------------------------------------------------
@@ -1945,20 +1876,29 @@ print_boot_device(type)
// displays the reason why boot failed
//--------------------------------------------------------------------------
void
-print_boot_failure(type, reason)
- Bit16u type; Bit8u reason;
+print_boot_failure(cdboot, drive, reason, lastdrive)
+ Bit8u cdboot; Bit8u drive; Bit8u lastdrive;
{
- if (type == 0 || type > 0x3) BX_PANIC("Bad drive type\n");
-
- printf("Boot from %s failed", drivetypes[type]);
- if (type < 4) {
- /* Report the reason too */
- if (reason==0)
- printf(": not a bootable disk");
+ Bit16u drivenum = drive&0x7f;
+
+ // cdboot: 1 if boot from cd, 0 otherwise
+ // drive : drive number
+ // reason: 0 signature check failed, 1 read error
+ // lastdrive: 1 boot drive is the last one in boot sequence
+
+ if (cdboot)
+ bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s
failed\n",drivetypes[2]);
+ else if (drive & 0x80)
+ bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s %d
failed\n", drivetypes[1],drivenum);
else
- printf(": could not read the boot disk");
+ bios_printf(BIOS_PRINTF_INFO | BIOS_PRINTF_SCREEN, "Boot from %s %d
failed\n", drivetypes[0],drivenum);
+
+ if (lastdrive==1) {
+ if (reason==0)
+ BX_PANIC("Not a bootable disk\n");
+ else
+ BX_PANIC("Could not read the boot disk\n");
}
- printf("\n");
}
//--------------------------------------------------------------------------
@@ -7606,19 +7546,19 @@ int17_function(regs, ds, iret_addr)
}
}
-void
-int19_function(seq_nr)
-Bit16u seq_nr;
+// returns bootsegment in ax, drive in bl
+ Bit32u
+int19_function(bseqnr)
+Bit8u bseqnr;
{
Bit16u ebda_seg=read_word(0x0040,0x000E);
- Bit16u bootdev;
+ Bit16u bootseq;
Bit8u bootdrv;
+ Bit8u bootcd;
Bit8u bootchk;
Bit16u bootseg;
- Bit16u bootip;
Bit16u status;
-
- struct ipl_entry e;
+ Bit8u lastdrive=0;
// if BX_ELTORITO_BOOT is not defined, old behavior
// check bit 5 in CMOS reg 0x2d. load either 0x00 or 0x80 into DL
@@ -7635,43 +7575,54 @@ Bit16u seq_nr;
// 0x01 : first floppy
// 0x02 : first harddrive
// 0x03 : first cdrom
- // 0x04 - 0x10 : PnP expansion ROMs (e.g. Etherboot)
// else : boot failure
// Get the boot sequence
#if BX_ELTORITO_BOOT
- bootdev = inb_cmos(0x3d);
- bootdev |= ((inb_cmos(0x38) & 0xf0) << 4);
- bootdev >>= 4 * seq_nr;
- bootdev &= 0xf;
- if (bootdev == 0) BX_PANIC("No bootable device.\n");
-
- /* Translate from CMOS runes to an IPL table offset by subtracting 1 */
- bootdev -= 1;
-#else
- if (seq_nr ==2) BX_PANIC("No more boot devices.");
- if (!!(inb_cmos(0x2d) & 0x20) ^ (seq_nr == 1))
- /* Floppy first if the bit is set or it's the second boot */
- bootdev = 0x00;
- else
- bootdev = 0x01;
-#endif
-
- /* Read the boot device from the IPL table */
- if (get_boot_vector(bootdev, &e) == 0) {
- BX_INFO("Invalid boot device (0x%x)\n", bootdev);
- return;
+ bootseq=inb_cmos(0x3d);
+ bootseq|=((inb_cmos(0x38) & 0xf0) << 4);
+
+ if (bseqnr==2) bootseq >>= 4;
+ if (bseqnr==3) bootseq >>= 8;
+ if (bootseq<0x10) lastdrive = 1;
+ bootdrv=0x00; bootcd=0;
+ switch(bootseq & 0x0f) {
+ case 0x01: bootdrv=0x00; bootcd=0; break;
+ case 0x02: bootdrv=0x80; bootcd=0; break;
+ case 0x03: bootdrv=0x00; bootcd=1; break;
+ default: return 0x00000000;
+ }
+#else
+ bootseq=inb_cmos(0x2d);
+
+ if (bseqnr==2) {
+ bootseq ^= 0x20;
+ lastdrive = 1;
}
-
- /* Do the loading, and set up vector as a far pointer to the boot
- * address, and bootdrv as the boot drive */
- print_boot_device(e.type);
-
- switch(e.type) {
- case 0x01: /* FDD */
- case 0x02: /* HDD */
-
- bootdrv = (e.type == 0x02) ? 0x80 : 0x00;
+ bootdrv=0x00; bootcd=0;
+ if((bootseq&0x20)==0) bootdrv=0x80;
+#endif // BX_ELTORITO_BOOT
+
+#if BX_ELTORITO_BOOT
+ // We have to boot from cd
+ if (bootcd != 0) {
+ status = cdrom_boot();
+
+ // If failure
+ if ( (status & 0x00ff) !=0 ) {
+ print_cdromboot_failure(status);
+ print_boot_failure(bootcd, bootdrv, 1, lastdrive);
+ return 0x00000000;
+ }
+
+ bootseg = read_word(ebda_seg,&EbdaData->cdemu.load_segment);
+ bootdrv = (Bit8u)(status>>8);
+ }
+
+#endif // BX_ELTORITO_BOOT
+
+ // We have to boot from harddisk or floppy
+ if (bootcd == 0) {
bootseg=0x07c0;
ASM_START
@@ -7699,71 +7650,39 @@ ASM_END
ASM_END
if (status != 0) {
- print_boot_failure(e.type, 1);
- return;
- }
-
- // check signature if instructed by cmos reg 0x38, only for floppy
- if (e.type == 0x00 && (inb_cmos(0x38) & 0x01)) {
- if (read_word(bootseg,0x1fe) != 0xaa55) {
- print_boot_failure(e.type, 0);
- return;
+ print_boot_failure(bootcd, bootdrv, 1, lastdrive);
+ return 0x00000000;
}
}
- /* Canonicalize bootseg:bootip */
- bootip = (bootseg & 0x0fff) << 4;
- bootseg &= 0xf000;
- break;
+ // check signature if instructed by cmos reg 0x38, only for floppy
+ // bootchk = 1 : signature check disabled
+ // bootchk = 0 : signature check enabled
+ if (bootdrv != 0) bootchk = 0;
+ else bootchk = inb_cmos(0x38) & 0x01;
#if BX_ELTORITO_BOOT
- case 0x03: /* CD-ROM */
- status = cdrom_boot();
-
- // If failure
- if ( (status & 0x00ff) !=0 ) {
- print_cdromboot_failure(status);
- print_boot_failure(e.type, 1);
- return;
+ // if boot from cd, no signature check
+ if (bootcd != 0)
+ bootchk = 1;
+#endif // BX_ELTORITO_BOOT
+
+ if (bootchk == 0) {
+ if (read_word(bootseg,0x1fe) != 0xaa55) {
+ print_boot_failure(bootcd, bootdrv, 0, lastdrive);
+ return 0x00000000;
+ }
}
-
- bootdrv = (Bit8u)(status>>8);
- bootseg = read_word(ebda_seg,&EbdaData->cdemu.load_segment);
- /* Canonicalize bootseg:bootip */
- bootip = (bootseg & 0x0fff) << 4;
- bootseg &= 0xf000;
- break;
-#endif
-
- case 0x80: /* Expansion ROM with a Bootstrap Entry Vector (a far pointer) */
- bootseg = e.vector >> 16;
- bootip = e.vector & 0xffff;
- break;
-
- default: return;
- }
- /* Jump to the boot vector */
-ASM_START
- mov bp, sp
- ;; Build an iret stack frame that will take us to the boot vector.
- ;; iret pops ip, then cs, then flags, so push them in the opposite order.
- pushf
- mov ax, _int19_function.bootseg + 0[bp]
- push ax
- mov ax, _int19_function.bootip + 0[bp]
- push ax
- ;; Set the magic number in ax and the boot drive in dl.
- mov ax, #0xaa55
- mov dl, _int19_function.bootdrv + 0[bp]
- ;; Zero some of the other registers.
- xor bx, bx
- mov ds, bx
- mov es, bx
- mov bp, bx
- ;; Go!
- iret
-ASM_END
+#if BX_ELTORITO_BOOT
+ // Print out the boot string
+ print_boot_device(bootcd, bootdrv);
+#else // BX_ELTORITO_BOOT
+ print_boot_device(0, bootdrv);
+#endif // BX_ELTORITO_BOOT
+
+ // return the boot segment
+ return (((Bit32u)bootdrv) << 16) + bootseg;
}
void
@@ -8220,26 +8139,14 @@ int13_out:
popa
iret
+
;----------
;- INT18h -
;----------
-int18_handler: ;; Boot Failure recovery: try the next device.
-
- ;; Reset DS, SS and SP
- xor ax, ax
- mov ds, ax
- mov ss, ax
- mov ax, #0xfffe
- mov sp, ax
-
- ;; Get the boot sequence number off the top of the stack
- sub sp, #2
- pop ax
- ;; Increment the boot sequence number, and carry on in the INT 19h handler
- inc ax
- push ax
-
- jmp int19_next_boot
+int18_handler: ;; Boot Failure routing
+ call _int18_panic_msg
+ hlt
+ iret
;----------
;- INT19h -
@@ -8253,25 +8160,56 @@ int19_relocated: ;; Boot function, reloc
push bp
mov bp, sp
-
- ;; Reset DS, SS and SP
+
+ ;; drop ds
xor ax, ax
mov ds, ax
- mov ss, ax
- mov ax, #0xfffe
- mov sp, ax
-
- ;; Start from the first boot device.
- mov ax, #0000
+
+ ;; 1st boot device
+ mov ax, #0x0001
push ax
-
-int19_next_boot:
-
- ;; Call the C code for the next boot device
call _int19_function
-
- ;; Boot failed: invoke the boot recovery function
- int #0x18
+ inc sp
+ inc sp
+ ;; bl contains the boot drive
+ ;; ax contains the boot segment or 0 if failure
+
+ test ax, ax ;; if ax is 0 try next boot device
+ jnz boot_setup
+
+ ;; 2nd boot device
+ mov ax, #0x0002
+ push ax
+ call _int19_function
+ inc sp
+ inc sp
+ test ax, ax ;; if ax is 0 try next boot device
+ jnz boot_setup
+
+ ;; 3rd boot device
+ mov ax, #0x0003
+ push ax
+ call _int19_function
+ inc sp
+ inc sp
+ test ax, ax ;; if ax is 0 call int18
+ jz int18_handler
+
+boot_setup:
+ mov dl, bl ;; set drive so guest os find it
+ shl eax, #0x04 ;; convert seg to ip
+ mov 2[bp], ax ;; set ip
+
+ shr eax, #0x04 ;; get cs back
+ and ax, #0xF000 ;; remove what went in ip
+ mov 4[bp], ax ;; set cs
+ xor ax, ax
+ mov es, ax ;; set es to zero fixes [ 549815 ]
+ mov [bp], ax ;; set bp to zero
+ mov ax, #0xaa55 ;; set ok flag
+
+ pop bp
+ iret ;; Beam me up Scotty
;----------
;- INT1Ch -
@@ -9449,15 +9387,6 @@ checksum_loop:
pop ax
ret
-
-;; We need a copy of this string, but we are not actually a PnP BIOS,
-;; so make sure it is *not* aligned, so OSes will not see it if they scan.
-.align 16
- db 0
-pnp_string:
- .ascii "$PnP"
-
-
rom_scan:
;; Scan for existence of valid expansion ROMS.
;; Video ROM: from 0xC0000..0xC7FFF in 2k increments
@@ -9492,17 +9421,9 @@ block_count_rounded:
xor bx, bx ;; Restore DS back to 0000:
mov ds, bx
push ax ;; Save AX
- push di ;; Save DI
;; Push addr of ROM entry point
push cx ;; Push seg
push #0x0003 ;; Push offset
-
- ;; Point ES:DI at "$PnP", which tells the ROM that we are a PnP BIOS.
- ;; That should stop it grabbing INT 19h; we will use its BEV instead.
- mov ax, #0xf000
- mov es, ax
- lea di, pnp_string
-
mov bp, sp ;; Call ROM init routine using seg:off on stack
db 0xff ;; call_far ss:[bp+0]
db 0x5e
@@ -9510,38 +9431,6 @@ block_count_rounded:
cli ;; In case expansion ROM BIOS turns IF on
add sp, #2 ;; Pop offset value
pop cx ;; Pop seg value (restore CX)
-
- ;; Look at the ROM's PnP Expansion header. Properly, we're supposed
- ;; to init all the ROMs and then go back and build an IPL table of
- ;; all the bootable devices, but we can get away with one pass.
- mov ds, cx ;; ROM base
- mov bx, 0x001a ;; 0x1A is the offset into ROM header that contains...
- mov ax, [bx] ;; the offset of PnP expansion header, where...
- cmp ax, #0x5024 ;; we look for signature "$PnP"
- jne no_bev
- mov ax, 2[bx]
- cmp ax, #0x506e
- jne no_bev
- mov ax, 0x1a[bx] ;; 0x1A is also the offset into the expansion header of...
- cmp ax, #0x0000 ;; the Bootstrap Entry Vector, or zero if there is none.
- je no_bev
-
- ;; Found a device that thinks it can boot the system. Record its BEV.
- mov bx, #IPL_SEG ;; Go to the segment where the IPL table lives
- mov ds, bx
- mov bx, IPL_COUNT_OFFSET ;; Read the number of entries so far
- cmp bx, #IPL_TABLE_ENTRIES
- je no_bev ;; Get out if the table is full
- shl bx, #0x4 ;; Turn count into offset (entries are 16 bytes)
- mov 0[bx], #0x80 ;; This entry is a BEV device
- mov 6[bx], cx ;; Build a far pointer from the segment...
- mov 4[bx], ax ;; and the offset
- shr bx, #0x4 ;; Turn the offset back into a count
- inc bx ;; We have one more entry now
- mov IPL_COUNT_OFFSET, bx ;; Remember that.
-
-no_bev:
- pop di ;; Restore DI
pop ax ;; Restore AX
rom_scan_increment:
shl ax, #5 ;; convert 512-bytes blocks to 16-byte increments
@@ -9874,8 +9763,6 @@ post_default_ints:
call _copy_e820_table
call smbios_init
#endif
-
- call _init_boot_vectors
call rom_scan
diff -r 8c6e20c60563 -r 132559289b46 tools/ioemu/hw/pc.c
--- a/tools/ioemu/hw/pc.c Fri Dec 22 11:58:22 2006 +0000
+++ b/tools/ioemu/hw/pc.c Fri Dec 22 22:57:47 2006 +0000
@@ -168,8 +168,6 @@ static int get_bios_disk(char *boot_devi
return 0x02; /* hard drive */
case 'd':
return 0x03; /* cdrom */
- case 'n':
- return 0x04; /* network */
}
}
return 0x00; /* no device */
diff -r 8c6e20c60563 -r 132559289b46 tools/ioemu/vl.c
--- a/tools/ioemu/vl.c Fri Dec 22 11:58:22 2006 +0000
+++ b/tools/ioemu/vl.c Fri Dec 22 22:57:47 2006 +0000
@@ -6153,7 +6153,7 @@ int main(int argc, char **argv)
case QEMU_OPTION_boot:
boot_device = strdup(optarg);
if (strspn(boot_device, "acd"
-#if defined(TARGET_SPARC) || defined(TARGET_I386)
+#ifdef TARGET_SPARC
"n"
#endif
) != strlen(boot_device)) {
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |