|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-changelog] [xen-unstable] merge with xen-unstable.hg
# HG changeset patch
# User awilliam@xxxxxxxxxxxx
# Date 1169932039 25200
# Node ID 140afd7a546245f7c5678bfce7b30b843a9a4e9c
# Parent 1faf482f119c0f6f21377d4ff938049e2dbe8404
# Parent d1710eb353855a5fac71e5507deb3d3a131a7de2
merge with xen-unstable.hg
---
extras/mini-os/time.c
| 225
linux-2.6-xen-sparse/arch/i386/kernel/smpalts.c
| 85
linux-2.6-xen-sparse/arch/i386/kernel/smpboot.c
| 1451 -----
linux-2.6-xen-sparse/arch/i386/kernel/traps.c
| 1162 ----
linux-2.6-xen-sparse/arch/i386/mm/pgtable.c
| 283 -
linux-2.6-xen-sparse/drivers/acpi/tables.c
| 626 --
linux-2.6-xen-sparse/drivers/xen/core/skbuff.c
| 145
linux-2.6-xen-sparse/include/asm-i386/atomic.h
| 254 -
linux-2.6-xen-sparse/include/asm-i386/bitops.h
| 463 -
linux-2.6-xen-sparse/include/asm-i386/elf.h
| 194
linux-2.6-xen-sparse/include/asm-i386/fixmap.h
| 151
linux-2.6-xen-sparse/include/asm-i386/futex.h
| 108
linux-2.6-xen-sparse/include/asm-i386/mach-xen/setup_arch_post.h
| 108
linux-2.6-xen-sparse/include/asm-i386/mach-xen/setup_arch_pre.h
| 5
linux-2.6-xen-sparse/include/asm-i386/page.h
| 148
linux-2.6-xen-sparse/include/asm-i386/rwsem.h
| 294 -
linux-2.6-xen-sparse/include/asm-i386/smp_alt.h
| 32
linux-2.6-xen-sparse/include/asm-i386/spinlock.h
| 217
linux-2.6-xen-sparse/include/asm-i386/system.h
| 606 --
linux-2.6-xen-sparse/include/xen/foreign_page.h
| 30
patches/linux-2.6.16.33/blktap-aio-16_03_06.patch
| 271 -
patches/linux-2.6.16.33/device_bind.patch
| 14
patches/linux-2.6.16.33/fix-hz-suspend.patch
| 25
patches/linux-2.6.16.33/fix-ide-cd-pio-mode.patch
| 13
patches/linux-2.6.16.33/git-2a8a3d5b65e86ec1dfef7d268c64a909eab94af7.patch
| 43
patches/linux-2.6.16.33/git-2efe55a9cec8418f0e0cde3dc3787a42fddc4411.patch
| 74
patches/linux-2.6.16.33/git-3566561bfadffcb5dbc85d576be80c0dbf2cccc9.patch
| 292 -
patches/linux-2.6.16.33/git-4bfaaef01a1badb9e8ffb0c0a37cd2379008d21f.patch
| 320 -
patches/linux-2.6.16.33/git-dbaab49f92ff6ae6255762a948375e4036cbdbd2.patch
| 45
patches/linux-2.6.16.33/i386-mach-io-check-nmi.patch
| 35
patches/linux-2.6.16.33/kasprintf.patch
| 57
patches/linux-2.6.16.33/linux-2.6.19-rc1-kexec-move_segment_code-i386.patch
| 102
patches/linux-2.6.16.33/linux-2.6.19-rc1-kexec-move_segment_code-x86_64.patch
| 95
patches/linux-2.6.16.33/net-csum.patch
| 57
patches/linux-2.6.16.33/net-gso-0-base.patch
| 2501 ----------
patches/linux-2.6.16.33/net-gso-1-check-dodgy.patch
| 22
patches/linux-2.6.16.33/net-gso-2-checksum-fix.patch
| 400 -
patches/linux-2.6.16.33/net-gso-3-fix-errorcheck.patch
| 13
patches/linux-2.6.16.33/net-gso-4-kill-warnon.patch
| 16
patches/linux-2.6.16.33/net-gso-5-rcv-mss.patch
| 11
patches/linux-2.6.16.33/net-gso-6-linear-segmentation.patch
| 20
patches/linux-2.6.16.33/pci-mmconfig-fix-from-2.6.17.patch
| 252 -
patches/linux-2.6.16.33/pmd-shared.patch
| 100
patches/linux-2.6.16.33/rcu_needs_cpu.patch
| 33
patches/linux-2.6.16.33/rename-TSS_sysenter_esp0-SYSENTER_stack_esp0.patch
| 26
patches/linux-2.6.16.33/series
| 34
patches/linux-2.6.16.33/smp-alts.patch
| 540 --
patches/linux-2.6.16.33/tpm_plugin_2.6.17.patch
| 1380 -----
patches/linux-2.6.16.33/vsnprintf.patch
| 178
patches/linux-2.6.16.33/x86-elfnote-as-preprocessor-macro.patch
| 27
patches/linux-2.6.16.33/x86-increase-interrupt-vector-range.patch
| 73
patches/linux-2.6.16.33/x86-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch
| 138
patches/linux-2.6.16.33/x86_64-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch
| 72
patches/linux-2.6.16.33/xen-hotplug.patch
| 10
patches/linux-2.6.16.33/xenoprof-generic.patch
| 615 --
tools/python/xen/xend/XendRoot.py
| 322 -
xen/arch/x86/x86_64/domctl.c
| 111
xen/arch/x86/x86_64/sysctl.c
| 33
xen/common/compat/domctl.c
| 137
xen/common/compat/sysctl.c
| 95
xen/common/elf32.c
| 19
.hgignore
| 2
Config.mk
| 5
Makefile
| 11
buildconfigs/linux-defconfig_xen0_ia64
| 3
buildconfigs/linux-defconfig_xen0_x86_32
| 193
buildconfigs/linux-defconfig_xen0_x86_64
| 187
buildconfigs/linux-defconfig_xenU_ia64
| 3
buildconfigs/linux-defconfig_xenU_x86_32
| 122
buildconfigs/linux-defconfig_xenU_x86_64
| 142
buildconfigs/linux-defconfig_xen_ia64
| 3
buildconfigs/linux-defconfig_xen_x86_32
| 445 +
buildconfigs/linux-defconfig_xen_x86_64
| 440 +
buildconfigs/mk.linux-2.6-xen
| 6
extras/mini-os/Makefile
| 2
extras/mini-os/arch/x86/mm.c
| 1
extras/mini-os/arch/x86/sched.c
| 20
extras/mini-os/arch/x86/time.c
| 225
extras/mini-os/include/sched.h
| 3
extras/mini-os/include/x86/x86_32/hypercall-x86_32.h
| 14
extras/mini-os/include/x86/x86_64/hypercall-x86_64.h
| 14
extras/mini-os/lib/math.c
| 5
extras/mini-os/lib/xmalloc.c
| 6
extras/mini-os/netfront.c
| 21
extras/mini-os/sched.c
| 26
extras/mini-os/xenbus/xenbus.c
| 2
linux-2.6-xen-sparse/arch/i386/Kconfig
| 221
linux-2.6-xen-sparse/arch/i386/Kconfig.cpu
| 6
linux-2.6-xen-sparse/arch/i386/Kconfig.debug
| 89
linux-2.6-xen-sparse/arch/i386/Makefile
| 14
linux-2.6-xen-sparse/arch/i386/kernel/Makefile
| 14
linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c
| 27
linux-2.6-xen-sparse/arch/i386/kernel/alternative-xen.c
| 389 +
linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c
| 17
linux-2.6-xen-sparse/arch/i386/kernel/asm-offsets.c
| 6
linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c
| 96
linux-2.6-xen-sparse/arch/i386/kernel/cpu/intel_cacheinfo-xen.c
| 774 +++
linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c
| 13
linux-2.6-xen-sparse/arch/i386/kernel/crash.c
| 18
linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S
| 364 +
linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S
| 6
linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c
| 143
linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c
| 1
linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c
| 34
linux-2.6-xen-sparse/arch/i386/kernel/microcode-xen.c
| 31
linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c
| 63
linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c
| 20
linux-2.6-xen-sparse/arch/i386/kernel/process-xen.c
| 64
linux-2.6-xen-sparse/arch/i386/kernel/quirks-xen.c
| 1
linux-2.6-xen-sparse/arch/i386/kernel/setup-xen.c
| 246
linux-2.6-xen-sparse/arch/i386/kernel/smp-xen.c
| 46
linux-2.6-xen-sparse/arch/i386/kernel/swiotlb.c
| 3
linux-2.6-xen-sparse/arch/i386/kernel/sysenter.c
| 102
linux-2.6-xen-sparse/arch/i386/kernel/time-xen.c
| 64
linux-2.6-xen-sparse/arch/i386/kernel/traps-xen.c
| 250
linux-2.6-xen-sparse/arch/i386/kernel/vm86.c
| 3
linux-2.6-xen-sparse/arch/i386/kernel/vmlinux.lds.S
| 46
linux-2.6-xen-sparse/arch/i386/mach-xen/setup.c
| 112
linux-2.6-xen-sparse/arch/i386/mm/fault-xen.c
| 299 -
linux-2.6-xen-sparse/arch/i386/mm/highmem-xen.c
| 4
linux-2.6-xen-sparse/arch/i386/mm/init-xen.c
| 73
linux-2.6-xen-sparse/arch/i386/mm/pgtable-xen.c
| 85
linux-2.6-xen-sparse/arch/i386/pci/Makefile
| 2
linux-2.6-xen-sparse/arch/i386/pci/irq-xen.c
| 20
linux-2.6-xen-sparse/arch/ia64/Kconfig
| 72
linux-2.6-xen-sparse/arch/ia64/Makefile
| 5
linux-2.6-xen-sparse/arch/ia64/dig/setup.c
| 8
linux-2.6-xen-sparse/arch/ia64/kernel/Makefile
| 1
linux-2.6-xen-sparse/arch/ia64/kernel/asm-offsets.c
| 17
linux-2.6-xen-sparse/arch/ia64/kernel/entry.S
| 23
linux-2.6-xen-sparse/arch/ia64/kernel/gate.S
| 1
linux-2.6-xen-sparse/arch/ia64/kernel/gate.lds.S
| 2
linux-2.6-xen-sparse/arch/ia64/kernel/head.S
| 8
linux-2.6-xen-sparse/arch/ia64/kernel/iosapic.c
| 296 -
linux-2.6-xen-sparse/arch/ia64/kernel/irq_ia64.c
| 26
linux-2.6-xen-sparse/arch/ia64/kernel/pal.S
| 18
linux-2.6-xen-sparse/arch/ia64/kernel/patch.c
| 8
linux-2.6-xen-sparse/arch/ia64/kernel/perfmon.c
| 24
linux-2.6-xen-sparse/arch/ia64/kernel/setup.c
| 74
linux-2.6-xen-sparse/arch/ia64/mm/ioremap.c
| 63
linux-2.6-xen-sparse/arch/ia64/oprofile/perfmon.c
| 1
linux-2.6-xen-sparse/arch/um/kernel/physmem.c
| 11
linux-2.6-xen-sparse/arch/x86_64/Kconfig
| 116
linux-2.6-xen-sparse/arch/x86_64/Makefile
| 47
linux-2.6-xen-sparse/arch/x86_64/ia32/Makefile
| 4
linux-2.6-xen-sparse/arch/x86_64/ia32/ia32entry-xen.S
| 62
linux-2.6-xen-sparse/arch/x86_64/ia32/vsyscall-sigreturn.S
| 23
linux-2.6-xen-sparse/arch/x86_64/kernel/Makefile
| 12
linux-2.6-xen-sparse/arch/x86_64/kernel/apic-xen.c
| 3
linux-2.6-xen-sparse/arch/x86_64/kernel/asm-offsets.c
| 3
linux-2.6-xen-sparse/arch/x86_64/kernel/crash.c
| 6
linux-2.6-xen-sparse/arch/x86_64/kernel/e820-xen.c
| 54
linux-2.6-xen-sparse/arch/x86_64/kernel/early_printk-xen.c
| 126
linux-2.6-xen-sparse/arch/x86_64/kernel/entry-xen.S
| 275 -
linux-2.6-xen-sparse/arch/x86_64/kernel/genapic-xen.c
| 1
linux-2.6-xen-sparse/arch/x86_64/kernel/head-xen.S
| 10
linux-2.6-xen-sparse/arch/x86_64/kernel/head64-xen.c
| 7
linux-2.6-xen-sparse/arch/x86_64/kernel/init_task.c
| 5
linux-2.6-xen-sparse/arch/x86_64/kernel/io_apic-xen.c
| 121
linux-2.6-xen-sparse/arch/x86_64/kernel/irq-xen.c
| 67
linux-2.6-xen-sparse/arch/x86_64/kernel/mpparse-xen.c
| 32
linux-2.6-xen-sparse/arch/x86_64/kernel/pci-swiotlb-xen.c
| 5
linux-2.6-xen-sparse/arch/x86_64/kernel/process-xen.c
| 58
linux-2.6-xen-sparse/arch/x86_64/kernel/setup-xen.c
| 354 -
linux-2.6-xen-sparse/arch/x86_64/kernel/setup64-xen.c
| 29
linux-2.6-xen-sparse/arch/x86_64/kernel/smp-xen.c
| 22
linux-2.6-xen-sparse/arch/x86_64/kernel/traps-xen.c
| 295 -
linux-2.6-xen-sparse/arch/x86_64/kernel/vsyscall-xen.c
| 4
linux-2.6-xen-sparse/arch/x86_64/kernel/x8664_ksyms-xen.c
| 113
linux-2.6-xen-sparse/arch/x86_64/mm/fault-xen.c
| 130
linux-2.6-xen-sparse/arch/x86_64/mm/init-xen.c
| 153
linux-2.6-xen-sparse/arch/x86_64/mm/pageattr-xen.c
| 80
linux-2.6-xen-sparse/arch/x86_64/pci/Makefile
| 3
linux-2.6-xen-sparse/drivers/Makefile
| 9
linux-2.6-xen-sparse/drivers/acpi/Kconfig
| 39
linux-2.6-xen-sparse/drivers/char/mem.c
| 89
linux-2.6-xen-sparse/drivers/char/tpm/tpm.c
| 1
linux-2.6-xen-sparse/drivers/char/tty_io.c
| 1071 +++-
linux-2.6-xen-sparse/drivers/firmware/Kconfig
| 6
linux-2.6-xen-sparse/drivers/pci/Kconfig
| 21
linux-2.6-xen-sparse/drivers/serial/Kconfig
| 109
linux-2.6-xen-sparse/drivers/video/Kconfig
| 220
linux-2.6-xen-sparse/drivers/video/console/Kconfig
| 244
linux-2.6-xen-sparse/drivers/xen/Kconfig
| 13
linux-2.6-xen-sparse/drivers/xen/balloon/balloon.c
| 2
linux-2.6-xen-sparse/drivers/xen/blkback/blkback.c
| 75
linux-2.6-xen-sparse/drivers/xen/blkback/common.h
| 6
linux-2.6-xen-sparse/drivers/xen/blkback/interface.c
| 32
linux-2.6-xen-sparse/drivers/xen/blkback/xenbus.c
| 19
linux-2.6-xen-sparse/drivers/xen/blkfront/blkfront.c
| 15
linux-2.6-xen-sparse/drivers/xen/blkfront/block.h
| 1
linux-2.6-xen-sparse/drivers/xen/blkfront/vbd.c
| 1
linux-2.6-xen-sparse/drivers/xen/blktap/blktap.c
| 94
linux-2.6-xen-sparse/drivers/xen/blktap/common.h
| 6
linux-2.6-xen-sparse/drivers/xen/blktap/interface.c
| 32
linux-2.6-xen-sparse/drivers/xen/blktap/xenbus.c
| 19
linux-2.6-xen-sparse/drivers/xen/char/mem.c
| 1
linux-2.6-xen-sparse/drivers/xen/console/console.c
| 7
linux-2.6-xen-sparse/drivers/xen/core/Makefile
| 1
linux-2.6-xen-sparse/drivers/xen/core/cpu_hotplug.c
| 8
linux-2.6-xen-sparse/drivers/xen/core/evtchn.c
| 109
linux-2.6-xen-sparse/drivers/xen/core/gnttab.c
| 2
linux-2.6-xen-sparse/drivers/xen/core/machine_reboot.c
| 38
linux-2.6-xen-sparse/drivers/xen/core/smpboot.c
| 18
linux-2.6-xen-sparse/drivers/xen/fbfront/xenfb.c
| 7
linux-2.6-xen-sparse/drivers/xen/netback/netback.c
| 40
linux-2.6-xen-sparse/drivers/xen/netfront/netfront.c
| 3
linux-2.6-xen-sparse/drivers/xen/pcifront/pci_op.c
| 14
linux-2.6-xen-sparse/drivers/xen/xenbus/xenbus_probe.c
| 36
linux-2.6-xen-sparse/drivers/xen/xenbus/xenbus_xs.c
| 16
linux-2.6-xen-sparse/fs/Kconfig
| 164
linux-2.6-xen-sparse/include/asm-i386/apic.h
| 13
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/fixmap.h
| 6
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/floppy.h
| 4
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/highmem.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/hw_irq.h
| 9
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/io.h
| 13
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/irqflags.h
| 136
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/mmu.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/mmu_context.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/page.h
| 26
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/param.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pci.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgalloc.h
| 23
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable-2level.h
| 2
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable-3level.h
| 2
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/pgtable.h
| 9
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/processor.h
| 33
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/setup.h
| 21
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/smp.h
| 2
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/spinlock.h
| 91
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/system.h
| 254 -
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/tlbflush.h
| 1
linux-2.6-xen-sparse/include/asm-i386/mach-xen/asm/vga.h
| 2
linux-2.6-xen-sparse/include/asm-i386/mach-xen/setup_arch.h
| 5
linux-2.6-xen-sparse/include/asm-ia64/dma-mapping.h
| 1
linux-2.6-xen-sparse/include/asm-ia64/hw_irq.h
| 18
linux-2.6-xen-sparse/include/asm-ia64/intel_intrin.h
| 134
linux-2.6-xen-sparse/include/asm-ia64/io.h
| 26
linux-2.6-xen-sparse/include/asm-ia64/irq.h
| 5
linux-2.6-xen-sparse/include/asm-ia64/machvec.h
| 23
linux-2.6-xen-sparse/include/asm-ia64/machvec_dig.h
| 2
linux-2.6-xen-sparse/include/asm-ia64/meminit.h
| 8
linux-2.6-xen-sparse/include/asm-ia64/page.h
| 27
linux-2.6-xen-sparse/include/asm-ia64/pal.h
| 48
linux-2.6-xen-sparse/include/asm-ia64/pgalloc.h
| 1
linux-2.6-xen-sparse/include/asm-ia64/processor.h
| 5
linux-2.6-xen-sparse/include/asm-ia64/system.h
| 15
linux-2.6-xen-sparse/include/asm-um/page.h
| 5
linux-2.6-xen-sparse/include/asm-x86_64/apic.h
| 27
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/dma-mapping.h
| 18
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/e820.h
| 5
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/fixmap.h
| 1
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/floppy.h
| 6
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/hw_irq.h
| 11
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/io.h
| 41
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/irqflags.h
| 148
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/mmu_context.h
| 7
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/nmi.h
| 30
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/page.h
| 23
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pci.h
| 5
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgalloc.h
| 29
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/pgtable.h
| 8
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/processor.h
| 19
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/smp.h
| 4
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/system.h
| 188
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/tlbflush.h
| 1
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/asm/vga.h
| 2
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/mach_time.h
| 37
linux-2.6-xen-sparse/include/asm-x86_64/mach-xen/mach_timer.h
| 4
linux-2.6-xen-sparse/include/linux/gfp.h
| 3
linux-2.6-xen-sparse/include/linux/highmem.h
| 13
linux-2.6-xen-sparse/include/linux/interrupt.h
| 158
linux-2.6-xen-sparse/include/linux/kexec.h
| 1
linux-2.6-xen-sparse/include/linux/mm.h
| 83
linux-2.6-xen-sparse/include/linux/page-flags.h
| 280 +
linux-2.6-xen-sparse/include/linux/pfn.h
| 9
linux-2.6-xen-sparse/include/linux/skbuff.h
| 203
linux-2.6-xen-sparse/include/xen/blkif.h
| 97
linux-2.6-xen-sparse/include/xen/evtchn.h
| 2
linux-2.6-xen-sparse/include/xen/pcifront.h
| 2
linux-2.6-xen-sparse/include/xen/xenbus.h
| 5
linux-2.6-xen-sparse/kernel/fork.c
| 282 -
linux-2.6-xen-sparse/kernel/irq/spurious.c
| 53
linux-2.6-xen-sparse/kernel/kexec.c
| 12
linux-2.6-xen-sparse/lib/Makefile
| 9
linux-2.6-xen-sparse/mm/Kconfig
| 17
linux-2.6-xen-sparse/mm/highmem.c
| 49
linux-2.6-xen-sparse/mm/memory.c
| 169
linux-2.6-xen-sparse/mm/mmap.c
| 73
linux-2.6-xen-sparse/mm/page_alloc.c
| 898 +--
linux-2.6-xen-sparse/net/core/dev.c
| 406 +
linux-2.6-xen-sparse/net/core/skbuff.c
| 173
patches/linux-2.6.18/blktap-aio-16_03_06.patch
| 161
patches/linux-2.6.18/fix-ide-cd-pio-mode.patch
| 13
patches/linux-2.6.18/fixaddr-top.patch
| 50
patches/linux-2.6.18/git-3566561bfadffcb5dbc85d576be80c0dbf2cccc9.patch
| 178
patches/linux-2.6.18/git-4bfaaef01a1badb9e8ffb0c0a37cd2379008d21f.patch
| 136
patches/linux-2.6.18/git-c06cb8b1c4d25e5b4d7a2d7c2462619de1e0dbc4.patch
| 27
patches/linux-2.6.18/git-dbaab49f92ff6ae6255762a948375e4036cbdbd2.patch
| 17
patches/linux-2.6.18/i386-mach-io-check-nmi.patch
| 30
patches/linux-2.6.18/linux-2.6.19-rc1-kexec-move_segment_code-i386.patch
| 96
patches/linux-2.6.18/linux-2.6.19-rc1-kexec-move_segment_code-x86_64.patch
| 96
patches/linux-2.6.18/net-csum.patch
| 40
patches/linux-2.6.18/net-gso-5-rcv-mss.patch
| 10
patches/linux-2.6.18/net-gso-6-linear-segmentation.patch
| 22
patches/linux-2.6.18/pmd-shared.patch
| 57
patches/linux-2.6.18/rename-TSS_sysenter_esp0-SYSENTER_stack_esp0.patch
| 26
patches/linux-2.6.18/series
| 20
patches/linux-2.6.18/x86-elfnote-as-preprocessor-macro.patch
| 25
patches/linux-2.6.18/x86-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch
| 39
patches/linux-2.6.18/x86_64-put-note-sections-into-a-pt_note-segment-in-vmlinux.patch
| 63
patches/linux-2.6.18/xen-hotplug.patch
| 10
patches/linux-2.6.18/xenoprof-generic.patch
| 294 +
tools/Makefile
| 1
tools/Rules.mk
| 2
tools/console/client/main.c
| 129
tools/debugger/gdb/gdbbuild
| 18
tools/examples/network-bridge
| 2
tools/examples/vtpm-impl
| 31
tools/examples/xend-config.sxp
| 6
tools/firmware/Makefile
| 2
tools/firmware/hvmloader/32bitbios_support.c
| 169
tools/firmware/hvmloader/Makefile
| 2
tools/firmware/hvmloader/config.h
| 7
tools/firmware/hvmloader/hvmloader.c
| 1
tools/firmware/hvmloader/mp_tables.c
| 11
tools/firmware/hvmloader/util.c
| 9
tools/firmware/hvmloader/util.h
| 5
tools/firmware/rombios/32bit/32bitbios.c
| 52
tools/firmware/rombios/32bit/Makefile
| 40
tools/firmware/rombios/32bit/jumptable.h
| 11
tools/firmware/rombios/32bit/mkhex
| 26
tools/firmware/rombios/32bit/rombios_compat.h
| 92
tools/firmware/rombios/32bit/tcgbios/Makefile
| 22
tools/firmware/rombios/32bit/tcgbios/tcgbios.c
| 1526 ++++++
tools/firmware/rombios/32bit/tcgbios/tcgbios.h
| 288 +
tools/firmware/rombios/32bit/tcgbios/tpm_drivers.c
| 180
tools/firmware/rombios/32bit/tcgbios/tpm_drivers.h
| 18
tools/firmware/rombios/32bit/util.c
| 450 +
tools/firmware/rombios/32bit/util.h
| 28
tools/firmware/rombios/32bitgateway.c
| 421 +
tools/firmware/rombios/32bitgateway.h
| 18
tools/firmware/rombios/32bitprotos.h
| 45
tools/firmware/rombios/Makefile
| 2
tools/firmware/rombios/rombios.c
| 77
tools/firmware/rombios/tcgbios.c
| 263 +
tools/ioemu/hw/cirrus_vga.c
| 52
tools/ioemu/hw/ide.c
| 3
tools/ioemu/hw/pci.c
| 3
tools/ioemu/hw/usb-uhci.c
| 8
tools/ioemu/hw/xen_platform.c
| 11
tools/ioemu/target-i386-dm/exec-dm.c
| 12
tools/ioemu/target-i386-dm/helper2.c
| 15
tools/ioemu/vl.c
| 72
tools/ioemu/vl.h
| 17
tools/libfsimage/common/Makefile
| 2
tools/libxc/Makefile
| 39
tools/libxc/ia64/xc_ia64_stubs.c
| 8
tools/libxc/powerpc64/utils.c
| 2
tools/libxc/xc_core.c
| 8
tools/libxc/xc_dom.h
| 261 +
tools/libxc/xc_dom_binloader.c
| 294 +
tools/libxc/xc_dom_boot.c
| 511 ++
tools/libxc/xc_dom_compat_linux.c
| 124
tools/libxc/xc_dom_core.c
| 773 +++
tools/libxc/xc_dom_elfloader.c
| 283 +
tools/libxc/xc_dom_ia64.c
| 118
tools/libxc/xc_dom_powerpc64.c
| 100
tools/libxc/xc_dom_x86.c
| 559 ++
tools/libxc/xc_domain.c
| 82
tools/libxc/xc_elf.h
| 525 --
tools/libxc/xc_evtchn.c
| 9
tools/libxc/xc_hvm_build.c
| 226
tools/libxc/xc_hvm_restore.c
| 360 +
tools/libxc/xc_hvm_save.c
| 727 ++
tools/libxc/xc_linux_save.c
| 87
tools/libxc/xc_load_elf.c
| 10
tools/libxc/xc_misc.c
| 18
tools/libxc/xc_private.c
| 63
tools/libxc/xc_private.h
| 3
tools/libxc/xc_ptrace.c
| 8
tools/libxc/xc_resume.c
| 181
tools/libxc/xc_tbuf.c
| 12
tools/libxc/xenctrl.h
| 51
tools/libxc/xenguest.h
| 20
tools/libxc/xg_private.c
| 37
tools/libxc/xg_private.h
| 134
tools/libxc/xg_save_restore.h
| 9
tools/misc/xend
| 2
tools/ptsname/Makefile
| 22
tools/ptsname/ptsname.c
| 44
tools/ptsname/setup.py
| 11
tools/pygrub/src/pygrub
| 39
tools/python/Makefile
| 2
tools/python/scripts/test_hvm_create.py
| 173
tools/python/scripts/test_vm_create.py
| 208
tools/python/scripts/xapi.py
| 558 +-
tools/python/setup.py
| 13
tools/python/xen/lowlevel/scf/scf.c
| 156
tools/python/xen/lowlevel/xc/xc.c
| 57
tools/python/xen/lowlevel/xs/xs.c
| 28
tools/python/xen/util/xmlrpclib2.py
| 4
tools/python/xen/web/httpserver.py
| 16
tools/python/xen/xend/Vifctl.py
| 4
tools/python/xen/xend/XendAPI.py
| 1025 ++--
tools/python/xen/xend/XendAPIConstants.py
| 2
tools/python/xen/xend/XendBootloader.py
| 97
tools/python/xen/xend/XendCheckpoint.py
| 101
tools/python/xen/xend/XendConfig.py
| 199
tools/python/xen/xend/XendDevices.py
| 8
tools/python/xen/xend/XendDomain.py
| 47
tools/python/xen/xend/XendDomainInfo.py
| 307 -
tools/python/xen/xend/XendLocalStorageRepo.py
| 94
tools/python/xen/xend/XendMonitor.py
| 332 +
tools/python/xen/xend/XendNode.py
| 135
tools/python/xen/xend/XendOptions.py
| 393 +
tools/python/xen/xend/XendPIF.py
| 6
tools/python/xen/xend/XendProtocol.py
| 6
tools/python/xen/xend/XendQCoWStorageRepo.py
| 366 +
tools/python/xen/xend/XendStateStore.py
| 2
tools/python/xen/xend/XendStorageRepository.py
| 353 -
tools/python/xen/xend/XendTask.py
| 226
tools/python/xen/xend/XendTaskManager.py
| 110
tools/python/xen/xend/XendVDI.py
| 33
tools/python/xen/xend/balloon.py
| 6
tools/python/xen/xend/image.py
| 87
tools/python/xen/xend/osdep.py
| 10
tools/python/xen/xend/server/ConsoleController.py
| 29
tools/python/xen/xend/server/DevController.py
| 13
tools/python/xen/xend/server/SrvRoot.py
| 2
tools/python/xen/xend/server/SrvServer.py
| 72
tools/python/xen/xend/server/XMLRPCServer.py
| 33
tools/python/xen/xend/server/netif.py
| 25
tools/python/xen/xend/server/relocate.py
| 14
tools/python/xen/xend/server/tests/test_controllers.py
| 10
tools/python/xen/xend/server/tpmif.py
| 8
tools/python/xen/xend/server/vfbif.py
| 8
tools/python/xen/xend/tests/test_XendConfig.py
| 42
tools/python/xen/xend/xenstore/xsutil.py
| 3
tools/python/xen/xm/create.py
| 62
tools/python/xen/xm/main.py
| 13
tools/python/xen/xm/opts.py
| 8
tools/python/xen/xm/tests/test_create.py
| 6
tools/vtpm/vtpm.patch
| 163
tools/vtpm_manager/Rules.mk
| 2
tools/vtpm_manager/manager/Makefile
| 3
tools/vtpm_manager/manager/dmictl.c
| 34
tools/vtpm_manager/manager/vtpm_manager.h
| 7
tools/vtpm_manager/manager/vtpm_manager_handler.c
| 3
tools/vtpm_manager/manager/vtpmd.c
| 17
tools/vtpm_manager/manager/vtpmpriv.h
| 2
tools/xcutils/readnotes.c
| 289 -
tools/xcutils/xc_restore.c
| 19
tools/xcutils/xc_save.c
| 5
tools/xenfb/Makefile
| 2
tools/xenfb/vncfb.c
| 223
tools/xenfb/xenfb.c
| 100
tools/xenstore/xenstored_core.c
| 5
tools/xenstore/xenstored_domain.c
| 52
tools/xenstore/xenstored_domain.h
| 3
tools/xenstore/xs.c
| 6
tools/xenstore/xs.h
| 5
tools/xm-test/ramdisk/Makefile.am
| 2
tools/xm-test/tests/xapi/02_xapi-vbd_basic.py
| 129
tools/xm-test/tests/xapi/Makefile.am
| 3
unmodified_drivers/linux-2.6/compat-include/xen/platform-compat.h
| 15
unmodified_drivers/linux-2.6/mkbuildtree
| 10
unmodified_drivers/linux-2.6/overrides.mk
| 4
unmodified_drivers/linux-2.6/platform-pci/platform-pci.c
| 27
xen/Makefile
| 4
xen/acm/acm_core.c
| 2
xen/acm/acm_simple_type_enforcement_hooks.c
| 14
xen/arch/ia64/vmx/vmmu.c
| 2
xen/arch/ia64/vmx/vmx_hypercall.c
| 6
xen/arch/ia64/xen/dom0_ops.c
| 10
xen/arch/ia64/xen/domain.c
| 113
xen/arch/ia64/xen/mm.c
| 4
xen/arch/powerpc/domctl.c
| 8
xen/arch/x86/boot/mkelf32.c
| 2
xen/arch/x86/domain.c
| 116
xen/arch/x86/domain_build.c
| 307 -
xen/arch/x86/domctl.c
| 196
xen/arch/x86/hvm/hpet.c
| 29
xen/arch/x86/hvm/hvm.c
| 65
xen/arch/x86/hvm/i8254.c
| 238
xen/arch/x86/hvm/intercept.c
| 304 +
xen/arch/x86/hvm/irq.c
| 52
xen/arch/x86/hvm/rtc.c
| 2
xen/arch/x86/hvm/svm/svm.c
| 442 +
xen/arch/x86/hvm/svm/vmcb.c
| 34
xen/arch/x86/hvm/svm/x86_32/exits.S
| 1
xen/arch/x86/hvm/svm/x86_64/exits.S
| 1
xen/arch/x86/hvm/vioapic.c
| 137
xen/arch/x86/hvm/vlapic.c
| 129
xen/arch/x86/hvm/vmx/vmcs.c
| 6
xen/arch/x86/hvm/vmx/vmx.c
| 311 +
xen/arch/x86/hvm/vpic.c
| 87
xen/arch/x86/hvm/vpt.c
| 10
xen/arch/x86/mm.c
| 87
xen/arch/x86/mm/shadow/common.c
| 34
xen/arch/x86/mm/shadow/multi.c
| 2
xen/arch/x86/setup.c
| 6
xen/arch/x86/smp.c
| 5
xen/arch/x86/sysctl.c
| 8
xen/arch/x86/traps.c
| 7
xen/arch/x86/x86_64/Makefile
| 2
xen/arch/x86/x86_64/compat/entry.S
| 26
xen/arch/x86/x86_emulate.c
| 195
xen/common/Makefile
| 5
xen/common/acm_ops.c
| 6
xen/common/bitmap.c
| 50
xen/common/compat/Makefile
| 4
xen/common/domain.c
| 105
xen/common/domctl.c
| 223
xen/common/elf.c
| 10
xen/common/event_channel.c
| 37
xen/common/grant_table.c
| 14
xen/common/kexec.c
| 11
xen/common/libelf/Makefile
| 4
xen/common/libelf/README
| 1
xen/common/libelf/libelf-dominfo.c
| 420 +
xen/common/libelf/libelf-loader.c
| 156
xen/common/libelf/libelf-private.h
| 51
xen/common/libelf/libelf-relocate.c
| 345 +
xen/common/libelf/libelf-tools.c
| 225
xen/common/memory.c
| 6
xen/common/perfc.c
| 4
xen/common/rcupdate.c
| 348 +
xen/common/schedule.c
| 2
xen/common/softirq.c
| 5
xen/common/sysctl.c
| 15
xen/common/xenoprof.c
| 4
xen/include/Makefile
| 2
xen/include/acm/acm_hooks.h
| 2
xen/include/asm-x86/hvm/domain.h
| 24
xen/include/asm-x86/hvm/hvm.h
| 12
xen/include/asm-x86/hvm/irq.h
| 65
xen/include/asm-x86/hvm/support.h
| 136
xen/include/asm-x86/hvm/svm/svm.h
| 1
xen/include/asm-x86/hvm/svm/vmcb.h
| 13
xen/include/asm-x86/hvm/vioapic.h
| 41
xen/include/asm-x86/hvm/vlapic.h
| 25
xen/include/asm-x86/hvm/vpic.h
| 46
xen/include/asm-x86/hvm/vpt.h
| 28
xen/include/asm-x86/x86_64/uaccess.h
| 3
xen/include/asm-x86/x86_emulate.h
| 110
xen/include/public/arch-x86/xen-x86_32.h
| 19
xen/include/public/arch-x86/xen.h
| 12
xen/include/public/domctl.h
| 90
xen/include/public/elfstructs.h
| 527 ++
xen/include/public/event_channel.h
| 13
xen/include/public/foreign/Makefile
| 37
xen/include/public/foreign/mkchecker.py
| 58
xen/include/public/foreign/mkheader.py
| 153
xen/include/public/foreign/reference.size
| 17
xen/include/public/foreign/structs.py
| 52
xen/include/public/hvm/hvm_op.h
| 20
xen/include/public/hvm/params.h
| 1
xen/include/public/hvm/save.h
| 330 +
xen/include/public/io/blkif.h
| 14
xen/include/public/io/protocols.h
| 21
xen/include/public/io/xs_wire.h
| 3
xen/include/public/libelf.h
| 238
xen/include/public/sysctl.h
| 18
xen/include/public/xen.h
| 10
xen/include/xen/bitmap.h
| 3
xen/include/xen/compat.h
| 2
xen/include/xen/domain.h
| 9
xen/include/xen/elf.h
| 493 -
xen/include/xen/rcupdate.h
| 147
xen/include/xen/sched.h
| 9
xen/include/xen/softirq.h
| 3
xen/include/xlat.lst
| 7
574 files changed, 32043 insertions(+), 24714 deletions(-)
diff -r 1faf482f119c -r 140afd7a5462 .hgignore
--- a/.hgignore Fri Jan 26 14:19:37 2007 -0700
+++ b/.hgignore Sat Jan 27 14:07:19 2007 -0700
@@ -210,6 +210,8 @@
^xen/include/asm-.*/asm-offsets\.h$
^xen/include/compat/.*$
^xen/include/hypervisor-ifs/arch$
+^xen/include/public/foreign/.*\.(c|h|size)$
+^xen/include/public/foreign/checker$
^xen/include/public/public$
^xen/include/xen/.*\.new$
^xen/include/xen/acm_policy\.h$
diff -r 1faf482f119c -r 140afd7a5462 Config.mk
--- a/Config.mk Fri Jan 26 14:19:37 2007 -0700
+++ b/Config.mk Sat Jan 27 14:07:19 2007 -0700
@@ -6,8 +6,11 @@ XEN_COMPILE_ARCH ?= $(shell uname -m
XEN_COMPILE_ARCH ?= $(shell uname -m | sed -e s/i.86/x86_32/ \
-e s/ppc/powerpc/ -e s/i86pc/x86_32/)
XEN_TARGET_ARCH ?= $(XEN_COMPILE_ARCH)
-XEN_TARGET_X86_PAE ?= n
XEN_OS ?= $(shell uname -s)
+
+ifeq ($(XEN_TARGET_ARCH),x86_32)
+XEN_TARGET_X86_PAE ?= y
+endif
CONFIG_$(XEN_OS) := y
diff -r 1faf482f119c -r 140afd7a5462 Makefile
--- a/Makefile Fri Jan 26 14:19:37 2007 -0700
+++ b/Makefile Sat Jan 27 14:07:19 2007 -0700
@@ -22,7 +22,7 @@ install: install-xen install-kernels ins
install: install-xen install-kernels install-tools install-docs
.PHONY: build
-build: kernels
+build: kernels build-headers
$(MAKE) -C xen build
$(MAKE) -C tools build
$(MAKE) -C docs build
@@ -59,11 +59,11 @@ prep-kernels:
for i in $(XKERNELS) ; do $(MAKE) $$i-prep || exit 1; done
.PHONY: install-xen
-install-xen:
+install-xen: build-headers
$(MAKE) -C xen install
.PHONY: install-tools
-install-tools:
+install-tools: build-headers
$(MAKE) -C tools install
.PHONY: install-kernels
@@ -81,6 +81,11 @@ dev-docs:
# Build all the various kernels and modules
.PHONY: kbuild
kbuild: kernels
+
+# generate header files
+.PHONY: build-headers
+build-headers:
+ $(MAKE) -C xen/include/public/foreign
# Delete the kernel build trees entirely
.PHONY: kdelete
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen0_ia64
--- a/buildconfigs/linux-defconfig_xen0_ia64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen0_ia64 Sat Jan 27 14:07:19 2007 -0700
@@ -1512,10 +1512,7 @@ CONFIG_CRYPTO_DES=y
# Hardware crypto devices
#
# CONFIG_XEN_UTIL is not set
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SKBUFF=y
# CONFIG_XEN_DEVMEM is not set
CONFIG_XEN_REBOOT=y
# CONFIG_XEN_SMPBOOT is not set
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen0_x86_32
--- a/buildconfigs/linux-defconfig_xen0_x86_32 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen0_x86_32 Sat Jan 27 14:07:19 2007 -0700
@@ -1,22 +1,27 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xen0
-# Thu May 11 17:06:31 2006
+# Linux kernel version: 2.6.18-xen0
+# Wed Jan 17 18:35:52 2007
#
CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
@@ -28,14 +33,16 @@ CONFIG_SYSVIPC=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,11 +54,9 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -62,15 +67,17 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
+CONFIG_STOP_MACHINE=y
#
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -88,6 +95,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
+CONFIG_SMP=y
# CONFIG_X86_PC is not set
CONFIG_X86_XEN=y
# CONFIG_X86_ELAN is not set
@@ -135,14 +143,14 @@ CONFIG_X86_GOOD_APIC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
-# CONFIG_SMP is not set
+CONFIG_NR_CPUS=8
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
+CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
+CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -158,10 +166,6 @@ CONFIG_SWIOTLB=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -172,6 +176,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HIGHPTE is not set
CONFIG_MTRR=y
# CONFIG_REGPARM is not set
@@ -183,6 +188,8 @@ CONFIG_KEXEC=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
+CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
@@ -199,6 +206,7 @@ CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
@@ -231,10 +239,10 @@ CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
# CONFIG_PCIEPORTBUS is not set
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
# CONFIG_SCx200 is not set
+CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -265,6 +273,8 @@ CONFIG_PACKET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -281,7 +291,10 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
@@ -291,6 +304,9 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -315,6 +331,8 @@ CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
# CONFIG_IP_NF_QUEUE is not set
#
@@ -340,12 +358,12 @@ CONFIG_BRIDGE=y
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
+CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -374,6 +392,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -419,6 +438,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -543,17 +563,19 @@ CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_DPT_I2O is not set
+CONFIG_SCSI_ADVANSYS=y
CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_MM is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
+CONFIG_SCSI_SATA_AHCI=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
@@ -574,7 +596,6 @@ CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
@@ -592,8 +613,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-CONFIG_MD_RAID5=y
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
@@ -693,6 +713,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
#
# Ethernet (1000 Mbit)
@@ -713,7 +734,7 @@ CONFIG_SK98LIN=y
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
#
# Ethernet (10000 Mbit)
@@ -721,6 +742,7 @@ CONFIG_TIGON3=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@@ -808,6 +830,7 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -843,7 +866,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
@@ -867,6 +889,8 @@ CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
@@ -892,7 +916,6 @@ CONFIG_DRM_SIS=m
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -906,30 +929,30 @@ CONFIG_DRM_SIS=m
# CONFIG_IBM_ASM is not set
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -941,6 +964,7 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -993,9 +1017,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
@@ -1008,15 +1030,6 @@ CONFIG_USB_HIDINPUT=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
#
# USB Network Adapters
@@ -1047,10 +1060,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
#
@@ -1068,6 +1083,19 @@ CONFIG_USB_MON=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
@@ -1076,6 +1104,42 @@ CONFIG_USB_MON=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# File systems
@@ -1101,6 +1165,7 @@ CONFIG_REISERFS_FS=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
@@ -1135,7 +1200,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -1242,23 +1306,32 @@ CONFIG_NLS_ISO8859_1=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
@@ -1311,24 +1384,26 @@ CONFIG_CRYPTO_CRC32C=m
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=y
+CONFIG_XEN_BLKDEV_TAP=y
+CONFIG_XEN_NETDEV_BACKEND=y
+# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
+CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
-CONFIG_XEN_BLKDEV_BACKEND=y
-CONFIG_XEN_BLKDEV_TAP=y
-CONFIG_XEN_NETDEV_BACKEND=y
-# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
-CONFIG_XEN_NETDEV_LOOPBACK=y
# CONFIG_XEN_TPMDEV_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
@@ -1338,9 +1413,13 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
+CONFIG_XEN_SMPBOOT=y
#
# Library routines
@@ -1350,9 +1429,13 @@ CONFIG_CRC32=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_PENDING_IRQ=y
+CONFIG_X86_SMP=y
CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_NO_TSS=y
CONFIG_X86_NO_IDT=y
CONFIG_KTIME_SCALAR=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen0_x86_64
--- a/buildconfigs/linux-defconfig_xen0_x86_64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen0_x86_64 Sat Jan 27 14:07:19 2007 -0700
@@ -1,14 +1,17 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xen0
-# Thu May 11 17:17:19 2006
+# Linux kernel version: 2.6.18-xen0
+# Wed Jan 17 18:26:35 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
@@ -16,6 +19,8 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -33,14 +38,15 @@ CONFIG_SYSVIPC=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -52,11 +58,9 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -67,7 +71,6 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -76,6 +79,8 @@ CONFIG_KMOD=y
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -103,6 +108,7 @@ CONFIG_X86_NO_IDT=y
CONFIG_X86_NO_IDT=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
# CONFIG_X86_MSR is not set
@@ -115,7 +121,6 @@ CONFIG_PREEMPT_NONE=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -125,15 +130,20 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x100000
+CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_REORDER is not set
+CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
@@ -153,6 +163,7 @@ CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_VIDEO=m
# CONFIG_ACPI_HOTKEY is not set
CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
@@ -178,9 +189,7 @@ CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
-# CONFIG_UNORDERED_IO is not set
# CONFIG_PCIEPORTBUS is not set
-CONFIG_PCI_LEGACY_PROC=y
# CONFIG_PCI_DEBUG is not set
#
@@ -231,7 +240,10 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
@@ -241,6 +253,9 @@ CONFIG_TCP_CONG_BIC=y
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -265,6 +280,8 @@ CONFIG_IP_NF_FTP=m
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
# CONFIG_IP_NF_QUEUE is not set
#
@@ -290,12 +307,12 @@ CONFIG_BRIDGE=y
CONFIG_BRIDGE=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
+CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -324,6 +341,7 @@ CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -369,6 +387,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -466,7 +485,7 @@ CONFIG_BLK_DEV_SD=y
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=y
# CONFIG_SCSI_SAS_ATTRS is not set
#
@@ -498,12 +517,13 @@ CONFIG_MEGARAID_NEWGEN=y
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
-# CONFIG_SCSI_SATA_AHCI is not set
+CONFIG_SCSI_SATA_AHCI=y
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=y
# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
# CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_SATA_QSTOR is not set
CONFIG_SCSI_SATA_PROMISE=y
CONFIG_SCSI_SATA_SX4=y
@@ -525,7 +545,6 @@ CONFIG_SCSI_BUSLOGIC=y
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
@@ -542,8 +561,8 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+CONFIG_MD_RAID456=y
+# CONFIG_MD_RAID5_RESHAPE is not set
CONFIG_MD_MULTIPATH=y
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
@@ -643,6 +662,7 @@ CONFIG_8139TOO_PIO=y
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=y
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
#
# Ethernet (1000 Mbit)
@@ -663,7 +683,7 @@ CONFIG_SK98LIN=y
CONFIG_SK98LIN=y
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
+CONFIG_BNX2=y
#
# Ethernet (10000 Mbit)
@@ -671,6 +691,7 @@ CONFIG_TIGON3=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@@ -758,6 +779,7 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -795,6 +817,8 @@ CONFIG_AGP=m
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
# CONFIG_AGP_INTEL is not set
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -804,6 +828,7 @@ CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -828,7 +853,6 @@ CONFIG_DRM_SIS=m
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -842,30 +866,30 @@ CONFIG_DRM_SIS=m
# CONFIG_IBM_ASM is not set
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -877,6 +901,7 @@ CONFIG_DUMMY_CONSOLE=y
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
@@ -929,9 +954,7 @@ CONFIG_USB_HIDINPUT=y
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
@@ -944,15 +967,6 @@ CONFIG_USB_HIDINPUT=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
#
# USB Network Adapters
@@ -983,10 +997,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
#
@@ -1002,6 +1018,24 @@ CONFIG_USB_MON=y
# MMC/SD Card support
#
# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
#
# InfiniBand support
@@ -1009,17 +1043,55 @@ CONFIG_INFINIBAND=y
CONFIG_INFINIBAND=y
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
+CONFIG_INFINIBAND_ISER=y
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# Firmware Drivers
@@ -1051,6 +1123,7 @@ CONFIG_REISERFS_FS=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
@@ -1085,7 +1158,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -1192,24 +1264,35 @@ CONFIG_NLS_ISO8859_1=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
@@ -1251,24 +1334,26 @@ CONFIG_CRYPTO_CRC32C=m
# Hardware crypto devices
#
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=y
+CONFIG_XEN_BLKDEV_TAP=y
+CONFIG_XEN_NETDEV_BACKEND=y
+# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
+CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_PCIDEV_BACKEND=y
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
-CONFIG_XEN_BLKDEV_BACKEND=y
-CONFIG_XEN_BLKDEV_TAP=y
-CONFIG_XEN_NETDEV_BACKEND=y
-# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
-CONFIG_XEN_NETDEV_LOOPBACK=y
# CONFIG_XEN_TPMDEV_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
@@ -1278,9 +1363,12 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
#
# Library routines
@@ -1290,3 +1378,4 @@ CONFIG_CRC32=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xenU_ia64
--- a/buildconfigs/linux-defconfig_xenU_ia64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xenU_ia64 Sat Jan 27 14:07:19 2007 -0700
@@ -1386,10 +1386,7 @@ CONFIG_CRYPTO_DES=y
# Hardware crypto devices
#
# CONFIG_XEN_UTIL is not set
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SKBUFF=y
# CONFIG_XEN_DEVMEM is not set
CONFIG_XEN_REBOOT=y
# CONFIG_XEN_SMPBOOT is not set
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xenU_x86_32
--- a/buildconfigs/linux-defconfig_xenU_x86_32 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xenU_x86_32 Sat Jan 27 14:07:19 2007 -0700
@@ -1,16 +1,21 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xenU
-# Thu May 11 17:08:12 2006
+# Linux kernel version: 2.6.18-xenU
+# Wed Jan 17 18:36:21 2007
#
CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -28,15 +33,16 @@ CONFIG_SYSVIPC=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -48,11 +54,9 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -63,7 +67,6 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -73,6 +76,8 @@ CONFIG_STOP_MACHINE=y
# Block layer
#
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -90,6 +95,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Processor type and features
#
+CONFIG_SMP=y
# CONFIG_X86_PC is not set
CONFIG_X86_XEN=y
# CONFIG_X86_ELAN is not set
@@ -137,13 +143,12 @@ CONFIG_X86_GOOD_APIC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
-CONFIG_SMP=y
-CONFIG_SMP_ALTERNATIVES=y
CONFIG_NR_CPUS=8
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
+CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -158,10 +163,6 @@ CONFIG_SWIOTLB=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -172,6 +173,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HIGHPTE is not set
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y
@@ -182,6 +184,7 @@ CONFIG_HZ=100
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -218,6 +221,8 @@ CONFIG_PACKET=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@@ -234,11 +239,17 @@ CONFIG_IP_PNP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@@ -264,7 +275,6 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
@@ -293,6 +303,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -324,6 +335,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -493,6 +505,7 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -515,6 +528,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIA=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
@@ -524,8 +539,9 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -550,7 +566,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -563,13 +578,10 @@ CONFIG_LEGACY_PTY_COUNT=256
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -579,14 +591,16 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -598,6 +612,7 @@ CONFIG_DUMMY_CONSOLE=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -614,6 +629,19 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
# InfiniBand support
#
@@ -621,6 +649,24 @@ CONFIG_DUMMY_CONSOLE=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# File systems
@@ -646,6 +692,7 @@ CONFIG_REISERFS_FS=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
@@ -680,7 +727,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -782,23 +828,32 @@ CONFIG_NLS_ISO8859_1=y
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
@@ -849,13 +904,15 @@ CONFIG_CRYPTO_CRC32C=m
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_XEN_UNPRIVILEGED_GUEST=y
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
# CONFIG_XEN_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
@@ -865,9 +922,13 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
+CONFIG_XEN_SMPBOOT=y
#
# Library routines
@@ -877,6 +938,7 @@ CONFIG_NO_IDLE_HZ=y
# CONFIG_CRC32 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xenU_x86_64
--- a/buildconfigs/linux-defconfig_xenU_x86_64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xenU_x86_64 Sat Jan 27 14:07:19 2007 -0700
@@ -1,14 +1,17 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xenU
-# Thu May 11 17:17:57 2006
+# Linux kernel version: 2.6.18-xenU
+# Wed Jan 17 18:28:53 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
@@ -16,6 +19,8 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -34,16 +39,17 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -55,11 +61,9 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@@ -70,7 +74,6 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
@@ -80,6 +83,8 @@ CONFIG_STOP_MACHINE=y
# Block layer
#
CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -107,6 +112,7 @@ CONFIG_X86_NO_IDT=y
CONFIG_X86_NO_IDT=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
@@ -117,7 +123,6 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -127,16 +132,19 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_NR_CPUS=8
-CONFIG_HOTPLUG_CPU=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_NR_CPUS=16
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_SWIOTLB=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x100000
+CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_REORDER is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
@@ -146,7 +154,6 @@ CONFIG_GENERIC_PENDING_IRQ=y
# Bus options (PCI etc.)
#
# CONFIG_PCI is not set
-# CONFIG_UNORDERED_IO is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -208,7 +215,10 @@ CONFIG_INET_AH=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
@@ -248,11 +258,16 @@ CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -277,6 +292,8 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
# CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m
#
@@ -342,13 +359,12 @@ CONFIG_IPX=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
-CONFIG_NET_DIVERT=y
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
@@ -435,6 +451,7 @@ CONFIG_ESI_DONGLE=m
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
+# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
@@ -476,6 +493,7 @@ CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIVHCI=m
# CONFIG_IEEE80211 is not set
+CONFIG_WIRELESS_EXT=y
#
# Device Drivers
@@ -488,6 +506,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -519,6 +538,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
@@ -577,8 +597,7 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
@@ -637,12 +656,12 @@ CONFIG_MII=m
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
+# CONFIG_NET_WIRELESS_RTNETLINK is not set
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
-CONFIG_ATMEL=m
# CONFIG_HOSTAP is not set
#
@@ -731,6 +750,7 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -753,6 +773,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
@@ -762,8 +783,8 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_MWAVE is not set
+# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
@@ -787,7 +808,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Dallas's 1-wire bus
#
-# CONFIG_W1 is not set
#
# Hardware Monitoring support
@@ -800,13 +820,10 @@ CONFIG_LEGACY_PTY_COUNT=256
#
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@@ -816,14 +833,16 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set
-# CONFIG_VIDEO_SELECT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -835,6 +854,7 @@ CONFIG_DUMMY_CONSOLE=y
#
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -851,6 +871,19 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_MMC is not set
#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
# InfiniBand support
#
@@ -858,6 +891,24 @@ CONFIG_DUMMY_CONSOLE=y
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set
+
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
#
# Firmware Drivers
@@ -893,7 +944,6 @@ CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
@@ -902,6 +952,7 @@ CONFIG_MINIX_FS=m
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
@@ -940,7 +991,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
@@ -960,6 +1010,8 @@ CONFIG_QNX4FS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
@@ -986,8 +1038,10 @@ CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
@@ -1076,24 +1130,35 @@ CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_FRAME_POINTER=y
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
@@ -1135,13 +1200,15 @@ CONFIG_CRYPTO_CRC32C=m
# Hardware crypto devices
#
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
# CONFIG_XEN_PRIVILEGED_GUEST is not set
CONFIG_XEN_UNPRIVILEGED_GUEST=y
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
# CONFIG_XEN_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
@@ -1151,9 +1218,13 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
+CONFIG_XEN_SMPBOOT=y
#
# Library routines
@@ -1164,3 +1235,6 @@ CONFIG_LIBCRC32C=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen_ia64
--- a/buildconfigs/linux-defconfig_xen_ia64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen_ia64 Sat Jan 27 14:07:19 2007 -0700
@@ -1518,10 +1518,7 @@ CONFIG_CRYPTO_DES=y
# Hardware crypto devices
#
# CONFIG_XEN_UTIL is not set
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
CONFIG_XEN_BALLOON=y
-CONFIG_XEN_SKBUFF=y
# CONFIG_XEN_DEVMEM is not set
CONFIG_XEN_REBOOT=y
# CONFIG_XEN_SMPBOOT is not set
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen_x86_32
--- a/buildconfigs/linux-defconfig_xen_x86_32 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen_x86_32 Sat Jan 27 14:07:19 2007 -0700
@@ -1,16 +1,21 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xen
-# Thu May 11 17:11:00 2006
+# Linux kernel version: 2.6.18-xen
+# Wed Jan 17 18:39:50 2007
#
CONFIG_X86_32=y
+CONFIG_GENERIC_TIME=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -29,17 +34,19 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -51,15 +58,12 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=m
#
# Loadable module support
@@ -67,7 +71,6 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -77,6 +80,8 @@ CONFIG_STOP_MACHINE=y
# Block layer
#
CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -94,6 +99,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
+CONFIG_SMP=y
# CONFIG_X86_PC is not set
CONFIG_X86_XEN=y
# CONFIG_X86_ELAN is not set
@@ -142,8 +148,6 @@ CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
-CONFIG_SMP=y
-CONFIG_SMP_ALTERNATIVES=y
CONFIG_NR_CPUS=32
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
@@ -151,6 +155,7 @@ CONFIG_PREEMPT_BKL=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
+CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
@@ -166,10 +171,6 @@ CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
@@ -180,18 +181,20 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
# CONFIG_HIGHPTE is not set
CONFIG_MTRR=y
CONFIG_REGPARM=y
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
-CONFIG_KEXEC=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options (ACPI, APM)
@@ -208,6 +211,7 @@ CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
@@ -220,6 +224,7 @@ CONFIG_ACPI_POWER=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
@@ -240,10 +245,11 @@ CONFIG_XEN_PCIDEV_FRONTEND=y
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_ISA_DMA_API=y
CONFIG_SCx200=m
+CONFIG_SCx200HR_TIMER=m
+CONFIG_K8_NB=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -326,7 +332,10 @@ CONFIG_INET_AH=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
@@ -342,6 +351,8 @@ CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
#
# IP: Virtual Server Configuration
@@ -378,11 +389,16 @@ CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -399,21 +415,28 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+# CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -423,6 +446,7 @@ CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
@@ -432,20 +456,20 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -463,6 +487,8 @@ CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -483,12 +509,10 @@ CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
@@ -530,10 +554,12 @@ CONFIG_BRIDGE_EBT_ULOG=m
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
@@ -541,7 +567,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_DCCP_UNLOAD_HACK is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -574,13 +599,12 @@ CONFIG_IPX=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
-# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
@@ -695,6 +719,7 @@ CONFIG_ESI_DONGLE=m
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
@@ -722,6 +747,7 @@ CONFIG_ALI_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -754,6 +780,9 @@ CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
#
# Device Drivers
@@ -766,6 +795,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -821,7 +851,6 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
@@ -866,7 +895,6 @@ CONFIG_MTD_MTDRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
-CONFIG_MTD_BLKMTD=m
CONFIG_MTD_BLOCK2MTD=m
#
@@ -885,6 +913,7 @@ CONFIG_MTD_DOCPROBE_ADDRESS=0
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
@@ -897,6 +926,7 @@ CONFIG_MTD_NAND_NANDSIM=m
#
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
@@ -909,6 +939,7 @@ CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
#
@@ -971,6 +1002,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -1103,6 +1135,7 @@ CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_DPT_I2O=m
+CONFIG_SCSI_ADVANSYS=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
@@ -1115,6 +1148,7 @@ CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_PDC_ADMA=m
+CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
@@ -1145,15 +1179,12 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MOD
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
CONFIG_SCSI_IPR_TRACE=y
CONFIG_SCSI_IPR_DUMP=y
-CONFIG_SCSI_QLOGIC_FC=m
-CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
@@ -1178,8 +1209,8 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
@@ -1237,7 +1268,6 @@ CONFIG_I2O=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
-CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
@@ -1281,6 +1311,11 @@ CONFIG_QSEMI_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_FIXED_PHY=m
+# CONFIG_FIXED_MII_10_FDX is not set
+# CONFIG_FIXED_MII_100_FDX is not set
#
# Ethernet (10 or 100Mbit)
@@ -1337,6 +1372,7 @@ CONFIG_TLAN=m
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
@@ -1373,6 +1409,7 @@ CONFIG_IXGB_NAPI=y
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
#
# Token Ring devices
@@ -1389,6 +1426,7 @@ CONFIG_ABYSS=m
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
@@ -1409,6 +1447,10 @@ CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+CONFIG_IPW2200_RADIOTAP=y
+CONFIG_IPW2200_PROMISCUOUS=y
+CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
@@ -1432,12 +1474,22 @@ CONFIG_PCMCIA_WL3501=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_PIO=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
@@ -1462,7 +1514,6 @@ CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LANMEDIA=m
-CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_RAW_ETH=y
@@ -1638,6 +1689,15 @@ CONFIG_HISAX_HDLC=y
#
#
+# Siemens Gigaset
+#
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GIGASET_UNDOCREQ is not set
+
+#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
@@ -1772,14 +1832,16 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_PCI=m
+CONFIG_SERIAL_8250_PNP=m
# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1850,7 +1912,11 @@ CONFIG_WDT_501_PCI=y
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
+CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
@@ -1894,6 +1960,8 @@ CONFIG_CARDMAN_4040=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
@@ -1938,6 +2006,7 @@ CONFIG_I2C_PIIX4=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
@@ -1964,9 +2033,7 @@ CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
CONFIG_SENSORS_MAX6875=m
-CONFIG_RTC_X1205_I2C=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -1993,19 +2060,29 @@ CONFIG_SPI_BUTTERFLY=m
# Dallas's 1-wire bus
#
CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
-CONFIG_W1_DS2433=m
-CONFIG_W1_DS2433_CRC=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
@@ -2021,6 +2098,7 @@ CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -2034,10 +2112,12 @@ CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
@@ -2051,22 +2131,22 @@ CONFIG_IBM_ASM=m
CONFIG_IBM_ASM=m
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
@@ -2076,6 +2156,7 @@ CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
@@ -2086,6 +2167,7 @@ CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
@@ -2096,15 +2178,51 @@ CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS=y
-CONFIG_VIDEO_CX88_VP3054=m
+
+#
+# Encoders and Decoders
+#
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# V4L USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_24XXX=y
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_VIDEO_AUDIO_DECODER=m
-CONFIG_VIDEO_DECODER=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
@@ -2112,6 +2230,7 @@ CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
@@ -2143,6 +2262,7 @@ CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
@@ -2198,6 +2318,7 @@ CONFIG_DVB_TDA1004X=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
@@ -2209,13 +2330,20 @@ CONFIG_DVB_STV0297=m
CONFIG_DVB_STV0297=m
#
-# ATSC (North American/Korean Terresterial DTV) frontends
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
@@ -2225,15 +2353,18 @@ CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
+CONFIG_USB_DABUSB=m
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
@@ -2245,7 +2376,6 @@ CONFIG_FB_ARC=m
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
-CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
@@ -2264,7 +2394,6 @@ CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_G=y
# CONFIG_FB_MATROX_I2C is not set
CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
@@ -2288,6 +2417,7 @@ CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_VIRTUAL=m
@@ -2295,6 +2425,8 @@ CONFIG_FB_VIRTUAL=m
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
@@ -2330,11 +2462,13 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -2356,6 +2490,7 @@ CONFIG_SND_MPU401=m
# PCI devices
#
CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
@@ -2372,6 +2507,18 @@ CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -2380,7 +2527,6 @@ CONFIG_SND_ES1968=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
-CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
@@ -2393,6 +2539,7 @@ CONFIG_SND_MIXART=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
@@ -2412,17 +2559,22 @@ CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
-# CONFIG_OBSOLETE_OSS_DRIVER is not set
-CONFIG_SOUND_FUSION=m
+# CONFIG_OSS_OBSOLETE_DRIVER is not set
+CONFIG_SOUND_BT878=m
+CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
+CONFIG_SOUND_VIA82CXXX=m
+# CONFIG_MIDI_VIA82CXXX is not set
# CONFIG_SOUND_OSS is not set
CONFIG_SOUND_TVMIXER=m
@@ -2431,6 +2583,7 @@ CONFIG_SOUND_TVMIXER=m
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -2449,6 +2602,7 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -2460,7 +2614,6 @@ CONFIG_USB_SL811_CS=m
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
@@ -2506,9 +2659,11 @@ CONFIG_USB_ACECAD=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-CONFIG_USB_ITMTOUCH=m
-CONFIG_USB_EGALAX=m
+CONFIG_USB_TOUCHSCREEN=m
+CONFIG_USB_TOUCHSCREEN_EGALAX=y
+CONFIG_USB_TOUCHSCREEN_PANJIT=y
+CONFIG_USB_TOUCHSCREEN_3M=y
+CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
@@ -2521,22 +2676,6 @@ CONFIG_USB_APPLETOUCH=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_PWC=m
#
# USB Network Adapters
@@ -2559,7 +2698,6 @@ CONFIG_USB_ARMLINUX=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_ZD1201=m
CONFIG_USB_MON=y
#
@@ -2573,7 +2711,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_ANYDATA=m
+CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -2581,6 +2719,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -2605,10 +2744,12 @@ CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
@@ -2626,10 +2767,12 @@ CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
+CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
@@ -2656,6 +2799,7 @@ CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
@@ -2672,7 +2816,27 @@ CONFIG_MMC=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+CONFIG_LEDS_NET48XX=m
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
@@ -2680,11 +2844,14 @@ CONFIG_INFINIBAND=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -2703,6 +2870,53 @@ CONFIG_EDAC_I82860=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=m
#
# File systems
@@ -2733,15 +2947,16 @@ CONFIG_JFS_STATISTICS=y
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
@@ -2778,12 +2993,10 @@ CONFIG_NTFS_FS=m
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-# CONFIG_PROC_VMCORE is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
CONFIG_CONFIGFS_FS=m
#
@@ -2805,6 +3018,7 @@ CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -2815,6 +3029,8 @@ CONFIG_QNX4FS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
@@ -2845,8 +3061,10 @@ CONFIG_CIFS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
# CONFIG_CIFS_POSIX is not set
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
@@ -2938,16 +3156,24 @@ CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
@@ -2955,6 +3181,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_EARLY_PRINTK=y
@@ -3014,24 +3241,26 @@ CONFIG_CRYPTO_TEST=m
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=y
+CONFIG_XEN_BLKDEV_TAP=y
+CONFIG_XEN_NETDEV_BACKEND=y
+# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
+CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_PCIDEV_BACKEND=m
CONFIG_XEN_PCIDEV_BACKEND_VPCI=y
# CONFIG_XEN_PCIDEV_BACKEND_PASS is not set
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
-CONFIG_XEN_BLKDEV_BACKEND=y
-CONFIG_XEN_BLKDEV_TAP=y
-CONFIG_XEN_NETDEV_BACKEND=y
-# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
-CONFIG_XEN_NETDEV_LOOPBACK=y
# CONFIG_XEN_TPMDEV_BACKEND is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
@@ -3043,9 +3272,13 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
+CONFIG_XEN_SMPBOOT=y
#
# Library routines
@@ -3054,6 +3287,7 @@ CONFIG_CRC16=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
@@ -3062,6 +3296,7 @@ CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/linux-defconfig_xen_x86_64
--- a/buildconfigs/linux-defconfig_xen_x86_64 Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/linux-defconfig_xen_x86_64 Sat Jan 27 14:07:19 2007 -0700
@@ -1,14 +1,17 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16.13-xen
-# Thu May 11 17:18:58 2006
+# Linux kernel version: 2.6.18-xen
+# Wed Jan 17 18:33:45 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
@@ -16,6 +19,8 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@@ -34,17 +39,19 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
+# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_VM86=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -56,15 +63,12 @@ CONFIG_FUTEX=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=m
#
# Loadable module support
@@ -72,7 +76,6 @@ CONFIG_MODULES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
@@ -82,6 +85,8 @@ CONFIG_STOP_MACHINE=y
# Block layer
#
CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LSF=y
#
# IO Schedulers
@@ -109,6 +114,7 @@ CONFIG_X86_NO_IDT=y
CONFIG_X86_NO_IDT=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_X86_MSR=m
@@ -122,7 +128,6 @@ CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
@@ -132,17 +137,22 @@ CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=32
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PHYSICAL_START=0x100000
+CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
CONFIG_HZ_100=y
-CONFIG_KEXEC=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
+# CONFIG_REORDER is not set
+CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
@@ -163,6 +173,7 @@ CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
+CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
@@ -175,6 +186,7 @@ CONFIG_ACPI_POWER=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m
+CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
@@ -189,9 +201,7 @@ CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_XEN_PCIDEV_FRONTEND=y
# CONFIG_XEN_PCIDEV_FE_DEBUG is not set
-# CONFIG_UNORDERED_IO is not set
# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_LEGACY_PROC is not set
# CONFIG_PCI_DEBUG is not set
#
@@ -277,7 +287,10 @@ CONFIG_INET_AH=m
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
@@ -293,6 +306,8 @@ CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
#
# IP: Virtual Server Configuration
@@ -329,11 +344,16 @@ CONFIG_IP_VS_FTP=m
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_IPV6_TUNNEL=m
+CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
@@ -350,21 +370,28 @@ CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
@@ -374,6 +401,7 @@ CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
+CONFIG_IP_NF_CONNTRACK_SECMARK=y
CONFIG_IP_NF_CONNTRACK_EVENTS=y
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
@@ -383,20 +411,20 @@ CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
+CONFIG_IP_NF_H323=m
+CONFIG_IP_NF_SIP=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_MATCH_POLICY=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -414,6 +442,8 @@ CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_TFTP=m
CONFIG_IP_NF_NAT_AMANDA=m
CONFIG_IP_NF_NAT_PPTP=m
+CONFIG_IP_NF_NAT_H323=m
+CONFIG_IP_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -434,12 +464,10 @@ CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AHESP=m
+CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_POLICY=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
@@ -481,10 +509,12 @@ CONFIG_BRIDGE_EBT_ULOG=m
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
+CONFIG_IP_DCCP_CCID2=m
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
@@ -492,7 +522,6 @@ CONFIG_IP_DCCP_TFRC_LIB=m
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_IP_DCCP_UNLOAD_HACK is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -526,13 +555,12 @@ CONFIG_IPX=m
CONFIG_IPX=m
CONFIG_IPX_INTERN=y
CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=y
+CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
-CONFIG_NET_DIVERT=y
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
@@ -646,6 +674,7 @@ CONFIG_ESI_DONGLE=m
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
+CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
@@ -672,6 +701,7 @@ CONFIG_ALI_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
@@ -704,6 +734,9 @@ CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
+CONFIG_IEEE80211_SOFTMAC=m
+# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
+CONFIG_WIRELESS_EXT=y
#
# Device Drivers
@@ -716,6 +749,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@@ -772,7 +806,6 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_OTP is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_AMDSTD_RETRY=3
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
@@ -815,7 +848,6 @@ CONFIG_MTD_MTDRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
-# CONFIG_MTD_BLKMTD is not set
CONFIG_MTD_BLOCK2MTD=m
#
@@ -836,6 +868,7 @@ CONFIG_MTD_DOCPROBE_55AA=y
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
@@ -848,6 +881,7 @@ CONFIG_MTD_NAND_NANDSIM=m
#
CONFIG_MTD_ONENAND=m
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_OTP is not set
#
# Parallel port support
@@ -859,6 +893,7 @@ CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_PCMCIA is not set
CONFIG_PARPORT_NOT_PC=y
# CONFIG_PARPORT_GSC is not set
+CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
#
@@ -920,6 +955,7 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
@@ -1062,6 +1098,7 @@ CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_MV=m
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_PDC_ADMA=m
+CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_SATA_QSTOR=m
CONFIG_SCSI_SATA_PROMISE=m
CONFIG_SCSI_SATA_SX4=m
@@ -1092,13 +1129,10 @@ CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MOD
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
-CONFIG_SCSI_QLOGIC_FC=m
-CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
-# CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE is not set
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
@@ -1120,8 +1154,8 @@ CONFIG_MD_RAID0=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
-CONFIG_MD_RAID5=m
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
@@ -1168,7 +1202,6 @@ CONFIG_IEEE1394_OHCI1394=m
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
@@ -1223,6 +1256,11 @@ CONFIG_QSEMI_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_FIXED_PHY=m
+# CONFIG_FIXED_MII_10_FDX is not set
+# CONFIG_FIXED_MII_100_FDX is not set
#
# Ethernet (10 or 100Mbit)
@@ -1278,6 +1316,7 @@ CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
# CONFIG_NET_POCKET is not set
#
@@ -1311,6 +1350,7 @@ CONFIG_IXGB_NAPI=y
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
#
# Token Ring devices
@@ -1326,6 +1366,7 @@ CONFIG_ABYSS=m
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
+CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
@@ -1346,6 +1387,10 @@ CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
+CONFIG_IPW2200_MONITOR=y
+# CONFIG_IPW2200_RADIOTAP is not set
+# CONFIG_IPW2200_PROMISCUOUS is not set
+CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
@@ -1369,12 +1414,22 @@ CONFIG_PCI_ATMEL=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
+CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
# CONFIG_HOSTAP_CS is not set
+CONFIG_BCM43XX=m
+CONFIG_BCM43XX_DEBUG=y
+CONFIG_BCM43XX_DMA=y
+CONFIG_BCM43XX_PIO=y
+CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
+# CONFIG_BCM43XX_DMA_MODE is not set
+# CONFIG_BCM43XX_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y
#
@@ -1528,6 +1583,15 @@ CONFIG_HISAX_HDLC=y
#
#
+# Siemens Gigaset
+#
+CONFIG_ISDN_DRV_GIGASET=m
+CONFIG_GIGASET_BASE=m
+CONFIG_GIGASET_M105=m
+# CONFIG_GIGASET_DEBUG is not set
+# CONFIG_GIGASET_UNDOCREQ is not set
+
+#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
@@ -1655,6 +1719,7 @@ CONFIG_VT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -1726,7 +1791,10 @@ CONFIG_WDT_501_PCI=y
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_INTEL=m
+CONFIG_HW_RANDOM_AMD=m
+CONFIG_HW_RANDOM_GEODE=m
CONFIG_NVRAM=y
CONFIG_RTC=y
CONFIG_DTLK=m
@@ -1739,6 +1807,8 @@ CONFIG_AGP=m
CONFIG_AGP=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
+CONFIG_AGP_SIS=m
+CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
@@ -1758,6 +1828,8 @@ CONFIG_DRM_SAVAGE=m
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
+CONFIG_PC8736x_GPIO=m
+CONFIG_NSC_GPIO=m
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
@@ -1800,11 +1872,11 @@ CONFIG_I2C_PIIX4=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
+CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
-CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
@@ -1823,9 +1895,7 @@ CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_RTC8564=m
CONFIG_SENSORS_MAX6875=m
-CONFIG_RTC_X1205_I2C=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -1852,19 +1922,29 @@ CONFIG_SPI_BUTTERFLY=m
# Dallas's 1-wire bus
#
CONFIG_W1=m
-CONFIG_W1_MATROX=m
-CONFIG_W1_DS9490=m
-CONFIG_W1_DS9490_BRIDGE=m
-CONFIG_W1_THERM=m
-CONFIG_W1_SMEM=m
-CONFIG_W1_DS2433=m
-CONFIG_W1_DS2433_CRC=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+CONFIG_W1_MASTER_MATROX=m
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+# CONFIG_W1_SLAVE_DS2433_CRC is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
+CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
@@ -1880,6 +1960,7 @@ CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
@@ -1893,10 +1974,12 @@ CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
@@ -1910,22 +1993,22 @@ CONFIG_IBM_ASM=m
CONFIG_IBM_ASM=m
#
-# Multimedia Capabilities Port drivers
-#
-
-#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
-
-#
-# Video For Linux
-#
-
-#
-# Video Adapters
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=y
+
+#
+# Video Capture Adapters
+#
+
+#
+# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
@@ -1935,6 +2018,7 @@ CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
@@ -1945,6 +2029,7 @@ CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
+CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
@@ -1953,15 +2038,51 @@ CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_DVB_ALL_FRONTENDS=y
-CONFIG_VIDEO_CX88_VP3054=m
+
+#
+# Encoders and Decoders
+#
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_CX2341X=m
+CONFIG_VIDEO_CX25840=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+
+#
+# V4L USB devices
+#
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_24XXX=y
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_VIDEO_AUDIO_DECODER=m
-CONFIG_VIDEO_DECODER=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
#
# Radio Adapters
@@ -1969,6 +2090,7 @@ CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
+CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
@@ -2000,6 +2122,7 @@ CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
@@ -2060,6 +2183,7 @@ CONFIG_DVB_TDA1004X=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
@@ -2071,13 +2195,20 @@ CONFIG_DVB_STV0297=m
CONFIG_DVB_STV0297=m
#
-# ATSC (North American/Korean Terresterial DTV) frontends
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
+
+#
+# Miscellaneous devices
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6421=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
@@ -2087,15 +2218,18 @@ CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
+CONFIG_USB_DABUSB=m
#
# Graphics support
#
+CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
@@ -2106,7 +2240,6 @@ CONFIG_FB_ARC=m
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
-CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=m
CONFIG_FB_HGA_ACCEL=y
CONFIG_FB_S1D13XXX=m
@@ -2115,6 +2248,8 @@ CONFIG_FB_RIVA=m
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_INTEL=m
+# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
@@ -2122,7 +2257,6 @@ CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
@@ -2145,6 +2279,7 @@ CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_TRIDENT_ACCEL=y
CONFIG_FB_GEODE=y
+CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_VIRTUAL=m
@@ -2152,6 +2287,7 @@ CONFIG_FB_VIRTUAL=m
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
@@ -2190,11 +2326,13 @@ CONFIG_SND_OSSEMUL=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
@@ -2216,6 +2354,7 @@ CONFIG_SND_MPU401=m
# PCI devices
#
CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
@@ -2231,6 +2370,18 @@ CONFIG_SND_CS4281=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
@@ -2238,7 +2389,7 @@ CONFIG_SND_ES1938=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
-# CONFIG_SND_FM801_TEA575X_BOOL is not set
+CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
@@ -2252,6 +2403,7 @@ CONFIG_SND_MIXART=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
@@ -2271,6 +2423,8 @@ CONFIG_SND_USB_USX2Y=m
#
# PCMCIA devices
#
+CONFIG_SND_VXPOCKET=m
+CONFIG_SND_PDAUDIOCF=m
#
# Open Sound System
@@ -2282,6 +2436,7 @@ CONFIG_SND_USB_USX2Y=m
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
@@ -2300,6 +2455,7 @@ CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -2311,7 +2467,6 @@ CONFIG_USB_SL811_HCD=m
#
# USB Device Class drivers
#
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
@@ -2357,9 +2512,11 @@ CONFIG_USB_ACECAD=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
-CONFIG_USB_MTOUCH=m
-CONFIG_USB_ITMTOUCH=m
-CONFIG_USB_EGALAX=m
+CONFIG_USB_TOUCHSCREEN=m
+CONFIG_USB_TOUCHSCREEN_EGALAX=y
+CONFIG_USB_TOUCHSCREEN_PANJIT=y
+CONFIG_USB_TOUCHSCREEN_3M=y
+CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
@@ -2372,22 +2529,6 @@ CONFIG_USB_APPLETOUCH=m
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-
-#
-# USB Multimedia devices
-#
-CONFIG_USB_DABUSB=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_DSBR=m
-CONFIG_USB_ET61X251=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_PWC=m
#
# USB Network Adapters
@@ -2410,7 +2551,6 @@ CONFIG_USB_ARMLINUX=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
-CONFIG_USB_ZD1201=m
CONFIG_USB_MON=y
#
@@ -2424,7 +2564,7 @@ CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRPRIME=m
-CONFIG_USB_SERIAL_ANYDATA=m
+CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
@@ -2432,6 +2572,7 @@ CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
@@ -2456,10 +2597,12 @@ CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
@@ -2477,10 +2620,12 @@ CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
+CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
+CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
@@ -2506,7 +2651,26 @@ CONFIG_MMC=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
+CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
+
+#
+# LED devices
+#
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
@@ -2514,11 +2678,14 @@ CONFIG_INFINIBAND=m
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
+CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -2530,12 +2697,55 @@ CONFIG_EDAC=m
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
-CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
-CONFIG_EDAC_I82875P=m
-CONFIG_EDAC_I82860=m
-CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=m
+CONFIG_RTC_INTF_PROC=m
+CONFIG_RTC_INTF_DEV=m
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+
+#
+# RTC drivers
+#
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_RS5C348=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_M48T86=m
+CONFIG_RTC_DRV_TEST=m
+CONFIG_RTC_DRV_MAX6902=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# DMA Engine support
+#
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+CONFIG_NET_DMA=y
+
+#
+# DMA Devices
+#
+CONFIG_INTEL_IOATDMA=m
#
# Firmware Drivers
@@ -2572,15 +2782,16 @@ CONFIG_JFS_SECURITY=y
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
@@ -2621,7 +2832,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
-CONFIG_RELAYFS_FS=m
CONFIG_CONFIGFS_FS=m
#
@@ -2643,6 +2853,9 @@ CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@@ -2656,6 +2869,8 @@ CONFIG_QNX4FS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
#
# Network File Systems
@@ -2686,8 +2901,10 @@ CONFIG_CIFS=m
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
@@ -2778,24 +2995,35 @@ CONFIG_NLS_UTF8=m
#
# Kernel hacking
#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FRAME_POINTER is not set
+# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
@@ -2844,26 +3072,27 @@ CONFIG_CRYPTO_TEST=m
# Hardware crypto devices
#
CONFIG_XEN=y
-CONFIG_XEN_INTERFACE_VERSION=0x00030202
+CONFIG_XEN_INTERFACE_VERSION=0x00030203
#
# XEN
#
CONFIG_XEN_PRIVILEGED_GUEST=y
# CONFIG_XEN_UNPRIVILEGED_GUEST is not set
+CONFIG_XEN_PRIVCMD=y
+CONFIG_XEN_XENBUS_DEV=y
CONFIG_XEN_BACKEND=y
+CONFIG_XEN_BLKDEV_BACKEND=y
+CONFIG_XEN_BLKDEV_TAP=y
+CONFIG_XEN_NETDEV_BACKEND=y
+# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
+CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_PCIDEV_BACKEND=m
# CONFIG_XEN_PCIDEV_BACKEND_VPCI is not set
CONFIG_XEN_PCIDEV_BACKEND_PASS=y
# CONFIG_XEN_PCIDEV_BACKEND_SLOT is not set
# CONFIG_XEN_PCIDEV_BE_DEBUG is not set
-CONFIG_XEN_BLKDEV_BACKEND=y
-CONFIG_XEN_BLKDEV_TAP=y
-CONFIG_XEN_NETDEV_BACKEND=y
-# CONFIG_XEN_NETDEV_PIPELINED_TRANSMITTER is not set
-CONFIG_XEN_NETDEV_LOOPBACK=y
CONFIG_XEN_TPMDEV_BACKEND=m
-# CONFIG_XEN_TPMDEV_CLOSE_IF_VTPM_FAILS is not set
CONFIG_XEN_BLKDEV_FRONTEND=y
CONFIG_XEN_NETDEV_FRONTEND=y
CONFIG_XEN_FRAMEBUFFER=y
@@ -2874,9 +3103,13 @@ CONFIG_XEN_COMPAT_030002_AND_LATER=y
CONFIG_XEN_COMPAT_030002_AND_LATER=y
# CONFIG_XEN_COMPAT_LATEST_ONLY is not set
CONFIG_XEN_COMPAT_030002=y
-CONFIG_HAVE_ARCH_ALLOC_SKB=y
-CONFIG_HAVE_ARCH_DEV_ALLOC_SKB=y
+CONFIG_HAVE_IRQ_IGNORE_UNHANDLED=y
CONFIG_NO_IDLE_HZ=y
+CONFIG_XEN_UTIL=y
+CONFIG_XEN_BALLOON=y
+CONFIG_XEN_DEVMEM=y
+CONFIG_XEN_REBOOT=y
+CONFIG_XEN_SMPBOOT=y
#
# Library routines
@@ -2893,3 +3126,4 @@ CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
diff -r 1faf482f119c -r 140afd7a5462 buildconfigs/mk.linux-2.6-xen
--- a/buildconfigs/mk.linux-2.6-xen Fri Jan 26 14:19:37 2007 -0700
+++ b/buildconfigs/mk.linux-2.6-xen Sat Jan 27 14:07:19 2007 -0700
@@ -1,5 +1,5 @@ LINUX_SERIES = 2.6
LINUX_SERIES = 2.6
-LINUX_VER = 2.6.16.33
+LINUX_VER = 2.6.18
EXTRAVERSION ?= xen
@@ -8,6 +8,10 @@ LINUX_DIR = build-linux-$(LINUX_VER)-
IMAGE_TARGET ?= vmlinuz
INSTALL_BOOT_PATH ?= $(DESTDIR)
+
+ifeq ($(XEN_TARGET_ARCH),ia64)
+INSTALL_BOOT_PATH := $(DESTDIR)/boot
+endif
LINUX_VER3 := $(LINUX_SERIES).$(word 3, $(subst ., ,$(LINUX_VER)))
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/Makefile
--- a/extras/mini-os/Makefile Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/Makefile Sat Jan 27 14:07:19 2007 -0700
@@ -9,7 +9,7 @@ XEN_ROOT = ../..
XEN_ROOT = ../..
include $(XEN_ROOT)/Config.mk
-XEN_INTERFACE_VERSION := 0x00030204
+XEN_INTERFACE_VERSION := 0x00030205
export XEN_INTERFACE_VERSION
# Set TARGET_ARCH
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/arch/x86/mm.c
--- a/extras/mini-os/arch/x86/mm.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/arch/x86/mm.c Sat Jan 27 14:07:19 2007 -0700
@@ -61,6 +61,7 @@ void new_pt_frame(unsigned long *pt_pfn,
mmu_update_t mmu_updates[1];
struct mmuext_op pin_request;
+ prot_e = prot_t = pincmd = 0;
DEBUG("Allocating new L%d pt frame for pt_pfn=%lx, "
"prev_l_mfn=%lx, offset=%lx",
level, *pt_pfn, prev_l_mfn, offset);
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/arch/x86/sched.c
--- a/extras/mini-os/arch/x86/sched.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/arch/x86/sched.c Sat Jan 27 14:07:19 2007 -0700
@@ -91,10 +91,11 @@ static void stack_push(struct thread *th
*((unsigned long *)thread->sp) = value;
}
-struct thread* create_thread(char *name, void (*function)(void *), void *data)
+/* Architecture specific setup of thread creation */
+struct thread* arch_create_thread(char *name, void (*function)(void *),
+ void *data)
{
struct thread *thread;
- unsigned long flags;
thread = xmalloc(struct thread);
/* Allocate 2 pages for stack, stack will be 2pages aligned */
@@ -110,23 +111,8 @@ struct thread* create_thread(char *name,
stack_push(thread, (unsigned long) function);
stack_push(thread, (unsigned long) data);
thread->ip = (unsigned long) thread_starter;
-
- /* Not runable, not exited, not sleeping */
- thread->flags = 0;
- thread->wakeup_time = 0LL;
- set_runnable(thread);
- local_irq_save(flags);
- if(idle_thread != NULL) {
- list_add_tail(&thread->thread_list, &idle_thread->thread_list);
- } else if(function != idle_thread_fn)
- {
- printk("BUG: Not allowed to create thread before initialising
scheduler.\n");
- BUG();
- }
- local_irq_restore(flags);
return thread;
}
-
void run_idle_thread(void)
{
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/arch/x86/time.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/extras/mini-os/arch/x86/time.c Sat Jan 27 14:07:19 2007 -0700
@@ -0,0 +1,225 @@
+/* -*- Mode:C; c-basic-offset:4; tab-width:4 -*-
+ ****************************************************************************
+ * (C) 2003 - Rolf Neugebauer - Intel Research Cambridge
+ * (C) 2002-2003 - Keir Fraser - University of Cambridge
+ * (C) 2005 - Grzegorz Milos - Intel Research Cambridge
+ * (C) 2006 - Robert Kaiser - FH Wiesbaden
+ ****************************************************************************
+ *
+ * File: time.c
+ * Author: Rolf Neugebauer and Keir Fraser
+ * Changes: Grzegorz Milos
+ *
+ * Description: Simple time and timer functions
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
+ * deal in the Software without restriction, including without limitation the
+ * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ */
+
+
+#include <os.h>
+#include <traps.h>
+#include <types.h>
+#include <hypervisor.h>
+#include <events.h>
+#include <time.h>
+#include <lib.h>
+
+/************************************************************************
+ * Time functions
+ *************************************************************************/
+
+/* These are peridically updated in shared_info, and then copied here. */
+struct shadow_time_info {
+ u64 tsc_timestamp; /* TSC at last update of time vals. */
+ u64 system_timestamp; /* Time, in nanosecs, since boot. */
+ u32 tsc_to_nsec_mul;
+ u32 tsc_to_usec_mul;
+ int tsc_shift;
+ u32 version;
+};
+static struct timespec shadow_ts;
+static u32 shadow_ts_version;
+
+static struct shadow_time_info shadow;
+
+
+#ifndef rmb
+#define rmb() __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory")
+#endif
+
+#define HANDLE_USEC_OVERFLOW(_tv) \
+ do { \
+ while ( (_tv)->tv_usec >= 1000000 ) \
+ { \
+ (_tv)->tv_usec -= 1000000; \
+ (_tv)->tv_sec++; \
+ } \
+ } while ( 0 )
+
+static inline int time_values_up_to_date(void)
+{
+ struct vcpu_time_info *src =
&HYPERVISOR_shared_info->vcpu_info[0].time;
+
+ return (shadow.version == src->version);
+}
+
+
+/*
+ * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
+ * yielding a 64-bit result.
+ */
+static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
+{
+ u64 product;
+#ifdef __i386__
+ u32 tmp1, tmp2;
+#endif
+
+ if ( shift < 0 )
+ delta >>= -shift;
+ else
+ delta <<= shift;
+
+#ifdef __i386__
+ __asm__ (
+ "mul %5 ; "
+ "mov %4,%%eax ; "
+ "mov %%edx,%4 ; "
+ "mul %5 ; "
+ "add %4,%%eax ; "
+ "xor %5,%5 ; "
+ "adc %5,%%edx ; "
+ : "=A" (product), "=r" (tmp1), "=r" (tmp2)
+ : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
+#else
+ __asm__ (
+ "mul %%rdx ; shrd $32,%%rdx,%%rax"
+ : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
+#endif
+
+ return product;
+}
+
+
+static unsigned long get_nsec_offset(void)
+{
+ u64 now, delta;
+ rdtscll(now);
+ delta = now - shadow.tsc_timestamp;
+ return scale_delta(delta, shadow.tsc_to_nsec_mul, shadow.tsc_shift);
+}
+
+
+static void get_time_values_from_xen(void)
+{
+ struct vcpu_time_info *src =
&HYPERVISOR_shared_info->vcpu_info[0].time;
+
+ do {
+ shadow.version = src->version;
+ rmb();
+ shadow.tsc_timestamp = src->tsc_timestamp;
+ shadow.system_timestamp = src->system_time;
+ shadow.tsc_to_nsec_mul = src->tsc_to_system_mul;
+ shadow.tsc_shift = src->tsc_shift;
+ rmb();
+ }
+ while ((src->version & 1) | (shadow.version ^ src->version));
+
+ shadow.tsc_to_usec_mul = shadow.tsc_to_nsec_mul / 1000;
+}
+
+
+
+
+/* monotonic_clock(): returns # of nanoseconds passed since time_init()
+ * Note: This function is required to return accurate
+ * time even in the absence of multiple timer ticks.
+ */
+u64 monotonic_clock(void)
+{
+ u64 time;
+ u32 local_time_version;
+
+ do {
+ local_time_version = shadow.version;
+ rmb();
+ time = shadow.system_timestamp + get_nsec_offset();
+ if (!time_values_up_to_date())
+ get_time_values_from_xen();
+ rmb();
+ } while (local_time_version != shadow.version);
+
+ return time;
+}
+
+static void update_wallclock(void)
+{
+ shared_info_t *s = HYPERVISOR_shared_info;
+
+ do {
+ shadow_ts_version = s->wc_version;
+ rmb();
+ shadow_ts.ts_sec = s->wc_sec;
+ shadow_ts.ts_nsec = s->wc_nsec;
+ rmb();
+ }
+ while ((s->wc_version & 1) | (shadow_ts_version ^ s->wc_version));
+}
+
+
+void gettimeofday(struct timeval *tv)
+{
+ u64 nsec = monotonic_clock();
+ nsec += shadow_ts.ts_nsec;
+
+
+ tv->tv_sec = shadow_ts.ts_sec;
+ tv->tv_sec += NSEC_TO_SEC(nsec);
+ tv->tv_usec = NSEC_TO_USEC(nsec % 1000000000UL);
+}
+
+
+void block_domain(s_time_t until)
+{
+ struct timeval tv;
+ gettimeofday(&tv);
+ if(monotonic_clock() < until)
+ {
+ HYPERVISOR_set_timer_op(until);
+ HYPERVISOR_sched_op(SCHEDOP_block, 0);
+ }
+}
+
+
+/*
+ * Just a dummy
+ */
+static void timer_handler(evtchn_port_t ev, struct pt_regs *regs, void *ign)
+{
+ get_time_values_from_xen();
+ update_wallclock();
+}
+
+
+
+void init_time(void)
+{
+ printk("Initialising timer interface\n");
+ bind_virq(VIRQ_TIMER, &timer_handler, NULL);
+}
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/include/sched.h
--- a/extras/mini-os/include/sched.h Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/include/sched.h Sat Jan 27 14:07:19 2007 -0700
@@ -31,6 +31,9 @@ void idle_thread_fn(void *unused);
#define switch_threads(prev, next) arch_switch_threads(prev, next)
+ /* Architecture specific setup of thread creation. */
+struct thread* arch_create_thread(char *name, void (*function)(void *),
+ void *data);
void init_sched(void);
void run_idle_thread(void);
diff -r 1faf482f119c -r 140afd7a5462
extras/mini-os/include/x86/x86_32/hypercall-x86_32.h
--- a/extras/mini-os/include/x86/x86_32/hypercall-x86_32.h Fri Jan 26
14:19:37 2007 -0700
+++ b/extras/mini-os/include/x86/x86_32/hypercall-x86_32.h Sat Jan 27
14:07:19 2007 -0700
@@ -303,6 +303,20 @@ HYPERVISOR_nmi_op(
unsigned long arg)
{
return _hypercall2(int, nmi_op, op, arg);
+}
+
+static inline int
+HYPERVISOR_sysctl(
+ unsigned long op)
+{
+ return _hypercall1(int, sysctl, op);
+}
+
+static inline int
+HYPERVISOR_domctl(
+ unsigned long op)
+{
+ return _hypercall1(int, domctl, op);
}
#endif /* __HYPERCALL_X86_32_H__ */
diff -r 1faf482f119c -r 140afd7a5462
extras/mini-os/include/x86/x86_64/hypercall-x86_64.h
--- a/extras/mini-os/include/x86/x86_64/hypercall-x86_64.h Fri Jan 26
14:19:37 2007 -0700
+++ b/extras/mini-os/include/x86/x86_64/hypercall-x86_64.h Sat Jan 27
14:07:19 2007 -0700
@@ -303,6 +303,20 @@ HYPERVISOR_nmi_op(
unsigned long arg)
{
return _hypercall2(int, nmi_op, op, arg);
+}
+
+static inline int
+HYPERVISOR_sysctl(
+ unsigned long op)
+{
+ return _hypercall1(int, sysctl, op);
+}
+
+static inline int
+HYPERVISOR_domctl(
+ unsigned long op)
+{
+ return _hypercall1(int, domctl, op);
}
#endif /* __HYPERCALL_X86_64_H__ */
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/lib/math.c
--- a/extras/mini-os/lib/math.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/lib/math.c Sat Jan 27 14:07:19 2007 -0700
@@ -56,6 +56,10 @@
*/
#include <types.h>
+
+ /* On ia64 these functions lead to crashes. These are replaced by
+ * assembler functions. */
+#if !defined(__ia64__)
/*
* Depending on the desired operation, we view a `long long' (aka quad_t) in
@@ -380,3 +384,4 @@ __umoddi3(u_quad_t a, u_quad_t b)
return (r);
}
+#endif /* !defined(__ia64__) */
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/lib/xmalloc.c
--- a/extras/mini-os/lib/xmalloc.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/lib/xmalloc.c Sat Jan 27 14:07:19 2007 -0700
@@ -48,6 +48,12 @@ struct xmalloc_hdr
/* Total including this hdr. */
size_t size;
struct list_head freelist;
+#if defined(__ia64__)
+ // Needed for ia64 as long as the align parameter in _xmalloc()
+ // is not supported.
+ uint64_t pad;
+#endif
+
} __cacheline_aligned;
static void maybe_split(struct xmalloc_hdr *hdr, size_t size, size_t block)
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/netfront.c
--- a/extras/mini-os/netfront.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/netfront.c Sat Jan 27 14:07:19 2007 -0700
@@ -324,10 +324,17 @@ done:
msg = xenbus_read(XBT_NIL, "device/vif/0/backend", &backend);
msg = xenbus_read(XBT_NIL, "device/vif/0/mac", &mac);
+ if ((backend == NULL) || (mac == NULL)) {
+ struct evtchn_close op = { info->local_port };
+ printk("%s: backend/mac failed\n", __func__);
+ unbind_evtchn(info->local_port);
+ HYPERVISOR_event_channel_op(EVTCHNOP_close, &op);
+ return;
+ }
+
printk("backend at %s\n",backend);
printk("mac is %s\n",mac);
- char *res;
char path[256];
sprintf(path,"%s/state",backend);
@@ -336,7 +343,6 @@ done:
xenbus_wait_for_value(path,"4");
//free(backend);
- free(res);
printk("**************************\n");
@@ -385,10 +391,7 @@ void init_rx_buffers(void)
netif_rx_request_t *req;
int notify;
- np->rx.req_prod_pvt = requeue_idx;
-
-
- /* Step 2: Rebuild the RX buffer freelist and the RX ring itself. */
+ /* Rebuild the RX buffer freelist and the RX ring itself. */
for (requeue_idx = 0, i = 0; i < NET_RX_RING_SIZE; i++)
{
struct net_buffer* buf = &rx_buffers[requeue_idx];
@@ -404,16 +407,12 @@ void init_rx_buffers(void)
np->rx.req_prod_pvt = requeue_idx;
-
-
RING_PUSH_REQUESTS_AND_CHECK_NOTIFY(&np->rx, notify);
- if(notify)
+ if (notify)
notify_remote_via_evtchn(np->evtchn);
np->rx.sring->rsp_event = np->rx.rsp_cons + 1;
-
-
}
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/sched.c
--- a/extras/mini-os/sched.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/sched.c Sat Jan 27 14:07:19 2007 -0700
@@ -155,11 +155,27 @@ void schedule(void)
if(prev != next) switch_threads(prev, next);
}
-
-/* Gets run when a new thread is scheduled the first time ever,
- defined in x86_[32/64].S */
-extern void thread_starter(void);
-
+struct thread* create_thread(char *name, void (*function)(void *), void *data)
+{
+ struct thread *thread;
+ unsigned long flags;
+ /* Call architecture specific setup. */
+ thread = arch_create_thread(name, function, data);
+ /* Not runable, not exited, not sleeping */
+ thread->flags = 0;
+ thread->wakeup_time = 0LL;
+ set_runnable(thread);
+ local_irq_save(flags);
+ if(idle_thread != NULL) {
+ list_add_tail(&thread->thread_list, &idle_thread->thread_list);
+ } else if(function != idle_thread_fn)
+ {
+ printk("BUG: Not allowed to create thread before initialising
scheduler.\n");
+ BUG();
+ }
+ local_irq_restore(flags);
+ return thread;
+}
void exit_thread(void)
{
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/time.c
--- a/extras/mini-os/time.c Fri Jan 26 14:19:37 2007 -0700
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,225 +0,0 @@
-/* -*- Mode:C; c-basic-offset:4; tab-width:4 -*-
- ****************************************************************************
- * (C) 2003 - Rolf Neugebauer - Intel Research Cambridge
- * (C) 2002-2003 - Keir Fraser - University of Cambridge
- * (C) 2005 - Grzegorz Milos - Intel Research Cambridge
- * (C) 2006 - Robert Kaiser - FH Wiesbaden
- ****************************************************************************
- *
- * File: time.c
- * Author: Rolf Neugebauer and Keir Fraser
- * Changes: Grzegorz Milos
- *
- * Description: Simple time and timer functions
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to
- * deal in the Software without restriction, including without limitation the
- * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-
-#include <os.h>
-#include <traps.h>
-#include <types.h>
-#include <hypervisor.h>
-#include <events.h>
-#include <time.h>
-#include <lib.h>
-
-/************************************************************************
- * Time functions
- *************************************************************************/
-
-/* These are peridically updated in shared_info, and then copied here. */
-struct shadow_time_info {
- u64 tsc_timestamp; /* TSC at last update of time vals. */
- u64 system_timestamp; /* Time, in nanosecs, since boot. */
- u32 tsc_to_nsec_mul;
- u32 tsc_to_usec_mul;
- int tsc_shift;
- u32 version;
-};
-static struct timespec shadow_ts;
-static u32 shadow_ts_version;
-
-static struct shadow_time_info shadow;
-
-
-#ifndef rmb
-#define rmb() __asm__ __volatile__ ("lock; addl $0,0(%%esp)": : :"memory")
-#endif
-
-#define HANDLE_USEC_OVERFLOW(_tv) \
- do { \
- while ( (_tv)->tv_usec >= 1000000 ) \
- { \
- (_tv)->tv_usec -= 1000000; \
- (_tv)->tv_sec++; \
- } \
- } while ( 0 )
-
-static inline int time_values_up_to_date(void)
-{
- struct vcpu_time_info *src =
&HYPERVISOR_shared_info->vcpu_info[0].time;
-
- return (shadow.version == src->version);
-}
-
-
-/*
- * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
- * yielding a 64-bit result.
- */
-static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift)
-{
- u64 product;
-#ifdef __i386__
- u32 tmp1, tmp2;
-#endif
-
- if ( shift < 0 )
- delta >>= -shift;
- else
- delta <<= shift;
-
-#ifdef __i386__
- __asm__ (
- "mul %5 ; "
- "mov %4,%%eax ; "
- "mov %%edx,%4 ; "
- "mul %5 ; "
- "add %4,%%eax ; "
- "xor %5,%5 ; "
- "adc %5,%%edx ; "
- : "=A" (product), "=r" (tmp1), "=r" (tmp2)
- : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) );
-#else
- __asm__ (
- "mul %%rdx ; shrd $32,%%rdx,%%rax"
- : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) );
-#endif
-
- return product;
-}
-
-
-static unsigned long get_nsec_offset(void)
-{
- u64 now, delta;
- rdtscll(now);
- delta = now - shadow.tsc_timestamp;
- return scale_delta(delta, shadow.tsc_to_nsec_mul, shadow.tsc_shift);
-}
-
-
-static void get_time_values_from_xen(void)
-{
- struct vcpu_time_info *src =
&HYPERVISOR_shared_info->vcpu_info[0].time;
-
- do {
- shadow.version = src->version;
- rmb();
- shadow.tsc_timestamp = src->tsc_timestamp;
- shadow.system_timestamp = src->system_time;
- shadow.tsc_to_nsec_mul = src->tsc_to_system_mul;
- shadow.tsc_shift = src->tsc_shift;
- rmb();
- }
- while ((src->version & 1) | (shadow.version ^ src->version));
-
- shadow.tsc_to_usec_mul = shadow.tsc_to_nsec_mul / 1000;
-}
-
-
-
-
-/* monotonic_clock(): returns # of nanoseconds passed since time_init()
- * Note: This function is required to return accurate
- * time even in the absence of multiple timer ticks.
- */
-u64 monotonic_clock(void)
-{
- u64 time;
- u32 local_time_version;
-
- do {
- local_time_version = shadow.version;
- rmb();
- time = shadow.system_timestamp + get_nsec_offset();
- if (!time_values_up_to_date())
- get_time_values_from_xen();
- rmb();
- } while (local_time_version != shadow.version);
-
- return time;
-}
-
-static void update_wallclock(void)
-{
- shared_info_t *s = HYPERVISOR_shared_info;
-
- do {
- shadow_ts_version = s->wc_version;
- rmb();
- shadow_ts.ts_sec = s->wc_sec;
- shadow_ts.ts_nsec = s->wc_nsec;
- rmb();
- }
- while ((s->wc_version & 1) | (shadow_ts_version ^ s->wc_version));
-}
-
-
-void gettimeofday(struct timeval *tv)
-{
- u64 nsec = monotonic_clock();
- nsec += shadow_ts.ts_nsec;
-
-
- tv->tv_sec = shadow_ts.ts_sec;
- tv->tv_sec += NSEC_TO_SEC(nsec);
- tv->tv_usec = NSEC_TO_USEC(nsec % 1000000000UL);
-}
-
-
-void block_domain(s_time_t until)
-{
- struct timeval tv;
- gettimeofday(&tv);
- if(monotonic_clock() < until)
- {
- HYPERVISOR_set_timer_op(until);
- HYPERVISOR_sched_op(SCHEDOP_block, 0);
- }
-}
-
-
-/*
- * Just a dummy
- */
-static void timer_handler(evtchn_port_t ev, struct pt_regs *regs, void *ign)
-{
- get_time_values_from_xen();
- update_wallclock();
-}
-
-
-
-void init_time(void)
-{
- printk("Initialising timer interface\n");
- bind_virq(VIRQ_TIMER, &timer_handler, NULL);
-}
diff -r 1faf482f119c -r 140afd7a5462 extras/mini-os/xenbus/xenbus.c
--- a/extras/mini-os/xenbus/xenbus.c Fri Jan 26 14:19:37 2007 -0700
+++ b/extras/mini-os/xenbus/xenbus.c Sat Jan 27 14:07:19 2007 -0700
@@ -103,7 +103,7 @@ static void xenbus_thread_func(void *ign
static void xenbus_thread_func(void *ign)
{
struct xsd_sockmsg msg;
- unsigned prod;
+ unsigned prod = 0;
for (;;)
{
diff -r 1faf482f119c -r 140afd7a5462 linux-2.6-xen-sparse/arch/i386/Kconfig
--- a/linux-2.6-xen-sparse/arch/i386/Kconfig Fri Jan 26 14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/Kconfig Sat Jan 27 14:07:19 2007 -0700
@@ -14,6 +14,19 @@ config X86_32
486, 586, Pentiums, and various instruction-set-compatible chips by
AMD, Cyrix, and others.
+config GENERIC_TIME
+ bool
+ depends on !X86_XEN
+ default y
+
+config LOCKDEP_SUPPORT
+ bool
+ default y
+
+config STACKTRACE_SUPPORT
+ bool
+ default y
+
config SEMAPHORE_SLEEPERS
bool
default y
@@ -37,6 +50,10 @@ config GENERIC_IOMAP
bool
default y
+config GENERIC_HWEIGHT
+ bool
+ default y
+
config ARCH_MAY_HAVE_PC_FDC
bool
default y
@@ -48,6 +65,35 @@ source "init/Kconfig"
source "init/Kconfig"
menu "Processor type and features"
+
+config SMP
+ bool "Symmetric multi-processing support"
+ ---help---
+ This enables support for systems with more than one CPU. If you have
+ a system with only one CPU, like most personal computers, say N. If
+ you have a system with more than one CPU, say Y.
+
+ If you say N here, the kernel will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor machine. If
+ you say Y here, the kernel will run on many, but not all,
+ singleprocessor machines. On a singleprocessor machine, the kernel
+ will run faster if you say N here.
+
+ Note that if you say Y here and choose architecture "586" or
+ "Pentium" under "Processor family", the kernel will not work on 486
+ architectures. Similarly, multiprocessor kernels for the "PPro"
+ architecture may not work on all Pentium based boards.
+
+ People using multiprocessor machines who say Y here should also say
+ Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
+ Management" code will be disabled if you say Y here.
+
+ See also the <file:Documentation/smp.txt>,
+ <file:Documentation/i386/IO-APIC.txt>,
+ <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+ <http://www.tldp.org/docs.html#howto>.
+
+ If you don't know what to do here, say N.
choice
prompt "Subarchitecture Type"
@@ -89,6 +135,7 @@ config X86_VOYAGER
config X86_NUMAQ
bool "NUMAQ (IBM/Sequent)"
+ select SMP
select NUMA
help
This option is used for getting Linux to run on a (IBM/Sequent) NUMA
@@ -105,6 +152,7 @@ config X86_SUMMIT
In particular, it is needed for the x440.
If you don't have one of these computers, you should say N here.
+ If you want to build a NUMA kernel, you must select ACPI.
config X86_BIGSMP
bool "Support for other sub-arch SMP systems with more than 8 CPUs"
@@ -132,6 +180,7 @@ config X86_GENERICARCH
help
This option compiles in the Summit, bigsmp, ES7000, default
subarchitectures.
It is intended for a generic binary kernel.
+ If you want a NUMA kernel, select ACPI. We need SRAT for NUMA.
config X86_ES7000
bool "Support for Unisys ES7000 IA32 series"
@@ -147,7 +196,13 @@ config ACPI_SRAT
config ACPI_SRAT
bool
default y
- depends on NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ depends on ACPI && NUMA && (X86_SUMMIT || X86_GENERICARCH)
+ select ACPI_NUMA
+
+config HAVE_ARCH_PARSE_SRAT
+ bool
+ default y
+ depends on ACPI_SRAT
config X86_SUMMIT_NUMA
bool
@@ -183,48 +238,6 @@ config HPET_EMULATE_RTC
depends on HPET_TIMER && RTC=y
default y
-config SMP
- bool "Symmetric multi-processing support"
- ---help---
- This enables support for systems with more than one CPU. If you have
- a system with only one CPU, like most personal computers, say N. If
- you have a system with more than one CPU, say Y.
-
- If you say N here, the kernel will run on single and multiprocessor
- machines, but will use only one CPU of a multiprocessor machine. If
- you say Y here, the kernel will run on many, but not all,
- singleprocessor machines. On a singleprocessor machine, the kernel
- will run faster if you say N here.
-
- Note that if you say Y here and choose architecture "586" or
- "Pentium" under "Processor family", the kernel will not work on 486
- architectures. Similarly, multiprocessor kernels for the "PPro"
- architecture may not work on all Pentium based boards.
-
- People using multiprocessor machines who say Y here should also say
- Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
- Management" code will be disabled if you say Y here.
-
- See also the <file:Documentation/smp.txt>,
- <file:Documentation/i386/IO-APIC.txt>,
- <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
- <http://www.tldp.org/docs.html#howto>.
-
- If you don't know what to do here, say N.
-
-config SMP_ALTERNATIVES
- bool "SMP alternatives support (EXPERIMENTAL)"
- depends on SMP && EXPERIMENTAL
- help
- Try to reduce the overhead of running an SMP kernel on a uniprocessor
- host slightly by replacing certain key instruction sequences
- according to whether we currently have more than one CPU available.
- This should provide a noticeable boost to performance when
- running SMP kernels on UP machines, and have negligible impact
- when running on an true SMP host.
-
- If unsure, say N.
-
config NR_CPUS
int "Maximum number of CPUs (2-255)"
range 2 255
@@ -241,13 +254,22 @@ config NR_CPUS
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
- depends on SMP && !X86_XEN
- default off
+ depends on X86_HT
+ depends on !X86_XEN
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with Intel Pentium 4 chips with HyperThreading at a
cost of slightly increased overhead in some places. If unsure say
N here.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on X86_HT
+ default y
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
source "kernel/Kconfig.preempt"
@@ -333,6 +355,15 @@ config X86_MCE_P4THERMAL
Enabling this feature will cause a message to be printed when the P4
enters thermal throttling.
+config VM86
+ default y
+ bool "Enable VM86 support" if EMBEDDED
+ help
+ This option is required by programs like DOSEMU to run 16-bit legacy
+ code on X86 processors. It also may be needed by software like
+ XFree86 to initialize some video cards via BIOS. Disabling this
+ option saves about 6k.
+
config TOSHIBA
tristate "Toshiba Laptop support"
---help---
@@ -434,6 +465,7 @@ choice
config NOHIGHMEM
bool "off"
+ depends on !X86_NUMAQ
---help---
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
However, the address space of 32-bit x86 processors is only 4
@@ -470,6 +502,7 @@ config NOHIGHMEM
config HIGHMEM4G
bool "4GB"
+ depends on !X86_NUMAQ
help
Select this if you have a 32-bit processor and between 1 and 4
gigabytes of physical RAM.
@@ -485,7 +518,7 @@ endchoice
choice
depends on EXPERIMENTAL && !X86_PAE
- prompt "Memory split"
+ prompt "Memory split" if EMBEDDED
default VMSPLIT_3G
help
Select the desired split between kernel and user memory.
@@ -529,20 +562,23 @@ config X86_PAE
bool
depends on HIGHMEM64G
default y
+ select RESOURCES_64BIT
# Common NUMA Features
config NUMA
bool "Numa Memory Allocation and Scheduler Support"
- depends on SMP && HIGHMEM64G && (X86_NUMAQ || X86_GENERICARCH ||
(X86_SUMMIT && ACPI))
+ depends on SMP && HIGHMEM64G && (X86_NUMAQ || (X86_SUMMIT ||
X86_GENERICARCH) && ACPI)
default n if X86_PC
default y if (X86_NUMAQ || X86_SUMMIT)
-# Need comments to help the hapless user trying to turn on NUMA support
-comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
- depends on X86_NUMAQ && (!HIGHMEM64G || !SMP)
-
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
+
+config NODES_SHIFT
+ int
+ default "4" if X86_NUMAQ
+ default "3"
+ depends on NEED_MULTIPLE_NODES
config HAVE_ARCH_BOOTMEM_NODE
bool
@@ -664,7 +700,7 @@ config MTRR
See <file:Documentation/mtrr.txt> for more information.
config EFI
- bool "Boot from EFI support (EXPERIMENTAL)"
+ bool "Boot from EFI support"
depends on ACPI && !X86_XEN
default n
---help---
@@ -697,13 +733,18 @@ config BOOT_IOREMAP
default y
config REGPARM
- bool "Use register arguments (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- default n
- help
- Compile the kernel with -mregparm=3. This uses a different ABI
- and passes the first three arguments of a function call in registers.
- This will probably break binary only modules.
+ bool "Use register arguments"
+ default y
+ help
+ Compile the kernel with -mregparm=3. This instructs gcc to use
+ a more efficient function call ABI which passes the first three
+ arguments of a function call via registers, which results in denser
+ and faster code.
+
+ If this option is disabled, then the default ABI of passing
+ arguments via the stack is used.
+
+ If unsure, say Y.
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
@@ -730,10 +771,10 @@ config KEXEC
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
+ but it is independent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
- The name comes from the similiarity to the exec system call.
+ The name comes from the similarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
@@ -772,20 +813,22 @@ config HOTPLUG_CPU
bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
---help---
- Say Y here to experiment with turning CPUs off and on. CPUs
- can be controlled through /sys/devices/system/cpu.
-
- Say N.
-
-config DOUBLEFAULT
- default y
- bool "Enable doublefault exception handler" if EMBEDDED
- depends on !X86_NO_TSS
- help
- This option allows trapping of rare doublefault exceptions that
- would otherwise cause a system to silently reboot. Disabling this
- option saves about 4k and might cause you much additional grey
- hair.
+ Say Y here to experiment with turning CPUs off and on, and to
+ enable suspend on SMP systems. CPUs can be controlled through
+ /sys/devices/system/cpu.
+
+config COMPAT_VDSO
+ bool "Compat VDSO support"
+ depends on !X86_XEN
+ default y
+ help
+ Map the VDSO to the predictable old-style address too.
+ ---help---
+ Say N here if you are running a sufficiently recent glibc
+ version (2.3.3 or later), to remove the high-mapped
+ VDSO mapping and to exclusively use the randomized VDSO.
+
+ If unsure, say Y.
endmenu
@@ -1090,13 +1133,27 @@ config SCx200
tristate "NatSemi SCx200 support"
depends on !X86_VOYAGER
help
- This provides basic support for the National Semiconductor SCx200
- processor. Right now this is just a driver for the GPIO pins.
-
- If you don't know what to do here, say N.
-
- This support is also available as a module. If compiled as a
- module, it will be called scx200.
+ This provides basic support for National Semiconductor's
+ (now AMD's) Geode processors. The driver probes for the
+ PCI-IDs of several on-chip devices, so its a good dependency
+ for other scx200_* drivers.
+
+ If compiled as a module, the driver is named scx200.
+
+config SCx200HR_TIMER
+ tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
+ depends on SCx200 && GENERIC_TIME
+ default y
+ help
+ This driver provides a clocksource built upon the on-chip
+ 27MHz high-resolution timer. Its also a workaround for
+ NSC Geode SC-1100's buggy TSC, which loses time when the
+ processor goes idle (as is done by the scheduler). The
+ other workaround is idle=poll boot option.
+
+config K8_NB
+ def_bool y
+ depends on AGP_AMD64
source "drivers/pcmcia/Kconfig"
diff -r 1faf482f119c -r 140afd7a5462 linux-2.6-xen-sparse/arch/i386/Kconfig.cpu
--- a/linux-2.6-xen-sparse/arch/i386/Kconfig.cpu Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/Kconfig.cpu Sat Jan 27 14:07:19
2007 -0700
@@ -41,7 +41,7 @@ config M386
- "GeodeGX1" for Geode GX1 (Cyrix MediaGX).
- "Geode GX/LX" For AMD Geode GX and LX processors.
- "CyrixIII/VIA C3" for VIA Cyrix III or VIA C3.
- - "VIA C3-2 for VIA C3-2 "Nehemiah" (model 9 and above).
+ - "VIA C3-2" for VIA C3-2 "Nehemiah" (model 9 and above).
If you don't know what to do, choose "386".
@@ -311,5 +311,5 @@ config X86_OOSTORE
config X86_TSC
bool
- depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON ||
MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII
|| M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1) && !X86_NUMAQ
- default y
+ depends on (MWINCHIP3D || MWINCHIP2 || MCRUSOE || MEFFICEON ||
MCYRIXIII || MK7 || MK6 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII
|| M686 || M586MMX || M586TSC || MK8 || MVIAC3_2 || MGEODEGX1 || MGEODE_LX) &&
!X86_NUMAQ
+ default y
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/Kconfig.debug
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux-2.6-xen-sparse/arch/i386/Kconfig.debug Sat Jan 27 14:07:19
2007 -0700
@@ -0,0 +1,89 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+ bool
+ default y
+
+source "lib/Kconfig.debug"
+
+config EARLY_PRINTK
+ bool "Early printk" if EMBEDDED && DEBUG_KERNEL
+ default y
+ help
+ Write kernel log output directly into the VGA buffer or to a serial
+ port.
+
+ This is useful for kernel debugging when your machine crashes very
+ early before the console code is initialized. For normal operation
+ it is not recommended because it looks ugly and doesn't cooperate
+ with klogd/syslogd or the X server. You should normally N here,
+ unless you want to debug such a crash.
+
+config DEBUG_STACKOVERFLOW
+ bool "Check for stack overflows"
+ depends on DEBUG_KERNEL
+ help
+ This option will cause messages to be printed if free stack space
+ drops below a certain limit.
+
+config DEBUG_STACK_USAGE
+ bool "Stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+comment "Page alloc debug is incompatible with Software Suspend on i386"
+ depends on DEBUG_KERNEL && SOFTWARE_SUSPEND
+
+config DEBUG_PAGEALLOC
+ bool "Debug page memory allocations"
+ depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND && !HUGETLBFS
+ help
+ Unmap pages from the kernel linear mapping after free_pages().
+ This results in a large slowdown, but helps to find certain types
+ of memory corruptions.
+
+config DEBUG_RODATA
+ bool "Write protect kernel read-only data structures"
+ depends on DEBUG_KERNEL
+ help
+ Mark the kernel read-only data as write-protected in the pagetables,
+ in order to catch accidental (and incorrect) writes to such const
+ data. This option may have a slight performance impact because a
+ portion of the kernel code won't be covered by a 2MB TLB anymore.
+ If in doubt, say "N".
+
+config 4KSTACKS
+ bool "Use 4Kb for kernel stacks instead of 8Kb"
+ depends on DEBUG_KERNEL
+ help
+ If you say Y here the kernel will use a 4Kb stacksize for the
+ kernel stack attached to each process/thread. This facilitates
+ running more threads on a system and also reduces the pressure
+ on the VM subsystem for higher order allocations. This option
+ will also use IRQ stacks to compensate for the reduced stackspace.
+
+config X86_FIND_SMP_CONFIG
+ bool
+ depends on X86_LOCAL_APIC || X86_VOYAGER
+ default y
+
+config X86_MPPARSE
+ bool
+ depends on X86_LOCAL_APIC && !X86_VISWS
+ default y
+
+config DOUBLEFAULT
+ default y
+ bool "Enable doublefault exception handler" if EMBEDDED
+ depends on !X86_NO_TSS
+ help
+ This option allows trapping of rare doublefault exceptions that
+ would otherwise cause a system to silently reboot. Disabling this
+ option saves about 4k and might cause you much additional grey
+ hair.
+
+endmenu
diff -r 1faf482f119c -r 140afd7a5462 linux-2.6-xen-sparse/arch/i386/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/Makefile Fri Jan 26 14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/Makefile Sat Jan 27 14:07:19 2007 -0700
@@ -38,6 +38,9 @@ include $(srctree)/arch/i386/Makefile.cp
include $(srctree)/arch/i386/Makefile.cpu
cflags-$(CONFIG_REGPARM) += -mregparm=3
+
+# temporary until string.h is fixed
+cflags-y += -ffreestanding
# Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use
# a lot more stack due to the lack of sharing of stacklots:
@@ -108,8 +111,8 @@ AFLAGS += $(mflags-y)
boot := arch/i386/boot
-.PHONY: zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 install
+PHONY += zImage bzImage compressed zlilo bzlilo \
+ zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
ifdef CONFIG_XEN
CPPFLAGS := -Iinclude$(if $(KBUILD_SRC),2)/asm/mach-xen $(CPPFLAGS)
@@ -141,7 +144,7 @@ zdisk bzdisk: vmlinux
zdisk bzdisk: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-fdimage fdimage144 fdimage288: vmlinux
+fdimage fdimage144 fdimage288 isoimage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
install:
@@ -159,7 +162,10 @@ define archhelp
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' bzdisk - Create a boot floppy in /dev/fd0'
echo ' fdimage - Create a boot floppy image'
+ echo ' isoimage - Create a boot CD-ROM image'
endef
-CLEAN_FILES += arch/$(ARCH)/boot/fdimage arch/$(ARCH)/boot/mtools.conf
+CLEAN_FILES += arch/$(ARCH)/boot/fdimage \
+ arch/$(ARCH)/boot/image.iso \
+ arch/$(ARCH)/boot/mtools.conf
CLEAN_FILES += vmlinuz vmlinux-stripped
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/Makefile
--- a/linux-2.6-xen-sparse/arch/i386/kernel/Makefile Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/Makefile Sat Jan 27 14:07:19
2007 -0700
@@ -6,11 +6,11 @@ extra-y := head.o init_task.o vmlinux.ld
obj-y := process.o semaphore.o signal.o entry.o traps.o irq.o \
ptrace.o time.o ioport.o ldt.o setup.o i8259.o sys_i386.o \
- pci-dma.o i386_ksyms.o i387.o dmi_scan.o bootflag.o \
- quirks.o i8237.o topology.o
+ pci-dma.o i386_ksyms.o i387.o bootflag.o \
+ quirks.o i8237.o topology.o alternative.o i8253.o tsc.o
+obj-$(CONFIG_STACKTRACE) += stacktrace.o
obj-y += cpu/
-obj-y += timers/
obj-y += acpi/
obj-$(CONFIG_X86_BIOS_REBOOT) += reboot.o
obj-$(CONFIG_MCA) += mca.o
@@ -37,7 +37,8 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefaul
obj-$(CONFIG_DOUBLEFAULT) += doublefault.o
obj-$(CONFIG_VM86) += vm86.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SMP_ALTERNATIVES) += smpalts.o
+obj-$(CONFIG_HPET_TIMER) += hpet.o
+obj-$(CONFIG_K8_NB) += k8.o
EXTRA_AFLAGS := -traditional
@@ -63,7 +64,8 @@ quiet_cmd_syscall = SYSCALL $@
export CPPFLAGS_vsyscall.lds += -P -C -U$(ARCH)
-vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1
+vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
+ $(call ld-option, -Wl$(comma)--hash-style=sysv)
SYSCFLAGS_vsyscall-sysenter.so = $(vsyscall-flags)
SYSCFLAGS_vsyscall-int80.so = $(vsyscall-flags)
@@ -84,6 +86,8 @@ SYSCFLAGS_vsyscall-syms.o = -r
$(obj)/vsyscall-sysenter.o $(obj)/$(vsyscall_note) FORCE
$(call if_changed,syscall)
+k8-y += ../../x86_64/kernel/k8.o
+
ifdef CONFIG_XEN
include $(srctree)/scripts/Makefile.xen
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/acpi/boot-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -24,7 +24,6 @@
*/
#include <linux/init.h>
-#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/module.h>
@@ -60,7 +59,7 @@ static inline int gsi_irq_sharing(int gs
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
- ((acpi_table_entry_header *)entry)->length != sizeof(*entry))
+ ((acpi_table_entry_header *)entry)->length < sizeof(*entry))
#define PREFIX "ACPI: "
@@ -204,6 +203,8 @@ int __init acpi_parse_mcfg(unsigned long
if (mcfg->config[i].base_reserved) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
+ kfree(pci_mmcfg_config);
+ pci_mmcfg_config_num = 0;
return -ENODEV;
}
}
@@ -217,7 +218,7 @@ static int __init acpi_parse_madt(unsign
{
struct acpi_table_madt *madt = NULL;
- if (!phys_addr || !size)
+ if (!phys_addr || !size || !cpu_has_apic)
return -EINVAL;
madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
@@ -624,9 +625,9 @@ extern u32 pmtmr_ioport;
static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
{
- struct fadt_descriptor_rev2 *fadt = NULL;
-
- fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size);
+ struct fadt_descriptor *fadt = NULL;
+
+ fadt = (struct fadt_descriptor *)__acpi_map_table(phys, size);
if (!fadt) {
printk(KERN_WARNING PREFIX "Unable to map FADT\n");
return 0;
@@ -671,10 +672,10 @@ unsigned long __init acpi_find_rsdp(void
unsigned long rsdp_phys = 0;
if (efi_enabled) {
- if (efi.acpi20)
- return __pa(efi.acpi20);
- else if (efi.acpi)
- return __pa(efi.acpi);
+ if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
+ return efi.acpi20;
+ else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
+ return efi.acpi;
}
/*
* Scan memory looking for the RSDP signature. First search EBDA (low
@@ -695,6 +696,9 @@ static int __init acpi_parse_madt_lapic_
static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
+
+ if (!cpu_has_apic)
+ return -ENODEV;
/*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
@@ -753,6 +757,9 @@ static int __init acpi_parse_madt_ioapic
if (acpi_disabled || acpi_noirq) {
return -ENODEV;
}
+
+ if (!cpu_has_apic)
+ return -ENODEV;
/*
* if "noapic" boot option, don't look for IO-APICs
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/alternative-xen.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/alternative-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -0,0 +1,389 @@
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <asm/alternative.h>
+#include <asm/sections.h>
+
+static int no_replacement = 0;
+static int smp_alt_once = 0;
+static int debug_alternative = 0;
+
+static int __init noreplacement_setup(char *s)
+{
+ no_replacement = 1;
+ return 1;
+}
+static int __init bootonly(char *str)
+{
+ smp_alt_once = 1;
+ return 1;
+}
+static int __init debug_alt(char *str)
+{
+ debug_alternative = 1;
+ return 1;
+}
+
+__setup("noreplacement", noreplacement_setup);
+__setup("smp-alt-boot", bootonly);
+__setup("debug-alternative", debug_alt);
+
+#define DPRINTK(fmt, args...) if (debug_alternative) \
+ printk(KERN_DEBUG fmt, args)
+
+#ifdef GENERIC_NOP1
+/* Use inline assembly to define this because the nops are defined
+ as inline assembly strings in the include files and we cannot
+ get them easily into strings. */
+asm("\t.data\nintelnops: "
+ GENERIC_NOP1 GENERIC_NOP2 GENERIC_NOP3 GENERIC_NOP4 GENERIC_NOP5
GENERIC_NOP6
+ GENERIC_NOP7 GENERIC_NOP8);
+extern unsigned char intelnops[];
+static unsigned char *intel_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ intelnops,
+ intelnops + 1,
+ intelnops + 1 + 2,
+ intelnops + 1 + 2 + 3,
+ intelnops + 1 + 2 + 3 + 4,
+ intelnops + 1 + 2 + 3 + 4 + 5,
+ intelnops + 1 + 2 + 3 + 4 + 5 + 6,
+ intelnops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+#endif
+
+#ifdef K8_NOP1
+asm("\t.data\nk8nops: "
+ K8_NOP1 K8_NOP2 K8_NOP3 K8_NOP4 K8_NOP5 K8_NOP6
+ K8_NOP7 K8_NOP8);
+extern unsigned char k8nops[];
+static unsigned char *k8_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ k8nops,
+ k8nops + 1,
+ k8nops + 1 + 2,
+ k8nops + 1 + 2 + 3,
+ k8nops + 1 + 2 + 3 + 4,
+ k8nops + 1 + 2 + 3 + 4 + 5,
+ k8nops + 1 + 2 + 3 + 4 + 5 + 6,
+ k8nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+#endif
+
+#ifdef K7_NOP1
+asm("\t.data\nk7nops: "
+ K7_NOP1 K7_NOP2 K7_NOP3 K7_NOP4 K7_NOP5 K7_NOP6
+ K7_NOP7 K7_NOP8);
+extern unsigned char k7nops[];
+static unsigned char *k7_nops[ASM_NOP_MAX+1] = {
+ NULL,
+ k7nops,
+ k7nops + 1,
+ k7nops + 1 + 2,
+ k7nops + 1 + 2 + 3,
+ k7nops + 1 + 2 + 3 + 4,
+ k7nops + 1 + 2 + 3 + 4 + 5,
+ k7nops + 1 + 2 + 3 + 4 + 5 + 6,
+ k7nops + 1 + 2 + 3 + 4 + 5 + 6 + 7,
+};
+#endif
+
+#ifdef CONFIG_X86_64
+
+extern char __vsyscall_0;
+static inline unsigned char** find_nop_table(void)
+{
+ return k8_nops;
+}
+
+#else /* CONFIG_X86_64 */
+
+static struct nop {
+ int cpuid;
+ unsigned char **noptable;
+} noptypes[] = {
+ { X86_FEATURE_K8, k8_nops },
+ { X86_FEATURE_K7, k7_nops },
+ { -1, NULL }
+};
+
+static unsigned char** find_nop_table(void)
+{
+ unsigned char **noptable = intel_nops;
+ int i;
+
+ for (i = 0; noptypes[i].cpuid >= 0; i++) {
+ if (boot_cpu_has(noptypes[i].cpuid)) {
+ noptable = noptypes[i].noptable;
+ break;
+ }
+ }
+ return noptable;
+}
+
+#endif /* CONFIG_X86_64 */
+
+extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+extern struct alt_instr __smp_alt_instructions[], __smp_alt_instructions_end[];
+extern u8 *__smp_locks[], *__smp_locks_end[];
+
+extern u8 __smp_alt_begin[], __smp_alt_end[];
+
+/* Replace instructions with better alternatives for this CPU type.
+ This runs before SMP is initialized to avoid SMP problems with
+ self modifying code. This implies that assymetric systems where
+ APs have less capabilities than the boot processor are not handled.
+ Tough. Make sure you disable such features by hand. */
+
+void apply_alternatives(struct alt_instr *start, struct alt_instr *end)
+{
+ unsigned char **noptable = find_nop_table();
+ struct alt_instr *a;
+ u8 *instr;
+ int diff, i, k;
+
+ DPRINTK("%s: alt table %p -> %p\n", __FUNCTION__, start, end);
+ for (a = start; a < end; a++) {
+ BUG_ON(a->replacementlen > a->instrlen);
+ if (!boot_cpu_has(a->cpuid))
+ continue;
+ instr = a->instr;
+#ifdef CONFIG_X86_64
+ /* vsyscall code is not mapped yet. resolve it manually. */
+ if (instr >= (u8 *)VSYSCALL_START && instr < (u8*)VSYSCALL_END)
{
+ instr -= VSYSCALL_START - (unsigned long)&__vsyscall_0;
+ DPRINTK("%s: vsyscall fixup: %p => %p\n",
+ __FUNCTION__, a->instr, instr);
+ }
+#endif
+ memcpy(instr, a->replacement, a->replacementlen);
+ diff = a->instrlen - a->replacementlen;
+ /* Pad the rest with nops */
+ for (i = a->replacementlen; diff > 0; diff -= k, i += k) {
+ k = diff;
+ if (k > ASM_NOP_MAX)
+ k = ASM_NOP_MAX;
+ memcpy(a->instr + i, noptable[k], k);
+ }
+ }
+}
+
+#ifdef CONFIG_SMP
+
+static void alternatives_smp_save(struct alt_instr *start, struct alt_instr
*end)
+{
+ struct alt_instr *a;
+
+ DPRINTK("%s: alt table %p-%p\n", __FUNCTION__, start, end);
+ for (a = start; a < end; a++) {
+ memcpy(a->replacement + a->replacementlen,
+ a->instr,
+ a->instrlen);
+ }
+}
+
+static void alternatives_smp_apply(struct alt_instr *start, struct alt_instr
*end)
+{
+ struct alt_instr *a;
+
+ for (a = start; a < end; a++) {
+ memcpy(a->instr,
+ a->replacement + a->replacementlen,
+ a->instrlen);
+ }
+}
+
+static void alternatives_smp_lock(u8 **start, u8 **end, u8 *text, u8 *text_end)
+{
+ u8 **ptr;
+
+ for (ptr = start; ptr < end; ptr++) {
+ if (*ptr < text)
+ continue;
+ if (*ptr > text_end)
+ continue;
+ **ptr = 0xf0; /* lock prefix */
+ };
+}
+
+static void alternatives_smp_unlock(u8 **start, u8 **end, u8 *text, u8
*text_end)
+{
+ unsigned char **noptable = find_nop_table();
+ u8 **ptr;
+
+ for (ptr = start; ptr < end; ptr++) {
+ if (*ptr < text)
+ continue;
+ if (*ptr > text_end)
+ continue;
+ **ptr = noptable[1][0];
+ };
+}
+
+struct smp_alt_module {
+ /* what is this ??? */
+ struct module *mod;
+ char *name;
+
+ /* ptrs to lock prefixes */
+ u8 **locks;
+ u8 **locks_end;
+
+ /* .text segment, needed to avoid patching init code ;) */
+ u8 *text;
+ u8 *text_end;
+
+ struct list_head next;
+};
+static LIST_HEAD(smp_alt_modules);
+static DEFINE_SPINLOCK(smp_alt);
+
+void alternatives_smp_module_add(struct module *mod, char *name,
+ void *locks, void *locks_end,
+ void *text, void *text_end)
+{
+ struct smp_alt_module *smp;
+ unsigned long flags;
+
+ if (no_replacement)
+ return;
+
+ if (smp_alt_once) {
+ if (boot_cpu_has(X86_FEATURE_UP))
+ alternatives_smp_unlock(locks, locks_end,
+ text, text_end);
+ return;
+ }
+
+ smp = kzalloc(sizeof(*smp), GFP_KERNEL);
+ if (NULL == smp)
+ return; /* we'll run the (safe but slow) SMP code then ... */
+
+ smp->mod = mod;
+ smp->name = name;
+ smp->locks = locks;
+ smp->locks_end = locks_end;
+ smp->text = text;
+ smp->text_end = text_end;
+ DPRINTK("%s: locks %p -> %p, text %p -> %p, name %s\n",
+ __FUNCTION__, smp->locks, smp->locks_end,
+ smp->text, smp->text_end, smp->name);
+
+ spin_lock_irqsave(&smp_alt, flags);
+ list_add_tail(&smp->next, &smp_alt_modules);
+ if (boot_cpu_has(X86_FEATURE_UP))
+ alternatives_smp_unlock(smp->locks, smp->locks_end,
+ smp->text, smp->text_end);
+ spin_unlock_irqrestore(&smp_alt, flags);
+}
+
+void alternatives_smp_module_del(struct module *mod)
+{
+ struct smp_alt_module *item;
+ unsigned long flags;
+
+ if (no_replacement || smp_alt_once)
+ return;
+
+ spin_lock_irqsave(&smp_alt, flags);
+ list_for_each_entry(item, &smp_alt_modules, next) {
+ if (mod != item->mod)
+ continue;
+ list_del(&item->next);
+ spin_unlock_irqrestore(&smp_alt, flags);
+ DPRINTK("%s: %s\n", __FUNCTION__, item->name);
+ kfree(item);
+ return;
+ }
+ spin_unlock_irqrestore(&smp_alt, flags);
+}
+
+void alternatives_smp_switch(int smp)
+{
+ struct smp_alt_module *mod;
+ unsigned long flags;
+
+#ifdef CONFIG_LOCKDEP
+ /*
+ * A not yet fixed binutils section handling bug prevents
+ * alternatives-replacement from working reliably, so turn
+ * it off:
+ */
+ printk("lockdep: not fixing up alternatives.\n");
+ return;
+#endif
+
+ if (no_replacement || smp_alt_once)
+ return;
+ BUG_ON(!smp && (num_online_cpus() > 1));
+
+ spin_lock_irqsave(&smp_alt, flags);
+ if (smp) {
+ printk(KERN_INFO "SMP alternatives: switching to SMP code\n");
+ clear_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
+ clear_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
+ alternatives_smp_apply(__smp_alt_instructions,
+ __smp_alt_instructions_end);
+ list_for_each_entry(mod, &smp_alt_modules, next)
+ alternatives_smp_lock(mod->locks, mod->locks_end,
+ mod->text, mod->text_end);
+ } else {
+ printk(KERN_INFO "SMP alternatives: switching to UP code\n");
+ set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
+ set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
+ apply_alternatives(__smp_alt_instructions,
+ __smp_alt_instructions_end);
+ list_for_each_entry(mod, &smp_alt_modules, next)
+ alternatives_smp_unlock(mod->locks, mod->locks_end,
+ mod->text, mod->text_end);
+ }
+ spin_unlock_irqrestore(&smp_alt, flags);
+}
+
+#endif
+
+void __init alternative_instructions(void)
+{
+ if (no_replacement) {
+ printk(KERN_INFO "(SMP-)alternatives turned off\n");
+ free_init_pages("SMP alternatives",
+ (unsigned long)__smp_alt_begin,
+ (unsigned long)__smp_alt_end);
+ return;
+ }
+ apply_alternatives(__alt_instructions, __alt_instructions_end);
+
+ /* switch to patch-once-at-boottime-only mode and free the
+ * tables in case we know the number of CPUs will never ever
+ * change */
+#ifdef CONFIG_HOTPLUG_CPU
+ if (num_possible_cpus() < 2)
+ smp_alt_once = 1;
+#else
+ smp_alt_once = 1;
+#endif
+
+#ifdef CONFIG_SMP
+ if (smp_alt_once) {
+ if (1 == num_possible_cpus()) {
+ printk(KERN_INFO "SMP alternatives: switching to UP
code\n");
+ set_bit(X86_FEATURE_UP, boot_cpu_data.x86_capability);
+ set_bit(X86_FEATURE_UP, cpu_data[0].x86_capability);
+ apply_alternatives(__smp_alt_instructions,
+ __smp_alt_instructions_end);
+ alternatives_smp_unlock(__smp_locks, __smp_locks_end,
+ _text, _etext);
+ }
+ free_init_pages("SMP alternatives",
+ (unsigned long)__smp_alt_begin,
+ (unsigned long)__smp_alt_end);
+ } else {
+ alternatives_smp_save(__smp_alt_instructions,
+ __smp_alt_instructions_end);
+ alternatives_smp_module_add(NULL, "core kernel",
+ __smp_locks, __smp_locks_end,
+ _text, _etext);
+ alternatives_smp_switch(0);
+ }
+#endif
+}
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/apic-xen.c Sat Jan 27 14:07:19
2007 -0700
@@ -14,7 +14,6 @@
* Mikael Pettersson : PM converted to driver model.
*/
-#include <linux/config.h>
#include <linux/init.h>
#include <linux/mm.h>
@@ -36,8 +35,10 @@
#include <asm/arch_hooks.h>
#include <asm/hpet.h>
#include <asm/i8253.h>
+#include <asm/nmi.h>
#include <mach_apic.h>
+#include <mach_apicdef.h>
#include <mach_ipi.h>
#include "io_ports.h"
@@ -59,6 +60,20 @@ int enable_local_apic __initdata = 0; /*
* Debug level
*/
int apic_verbosity;
+
+#ifndef CONFIG_XEN
+static int modern_apic(void)
+{
+ unsigned int lvr, version;
+ /* AMD systems use old APIC versions, so check the CPU */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 >= 0xf)
+ return 1;
+ lvr = apic_read(APIC_LVR);
+ version = GET_APIC_VERSION(lvr);
+ return version >= 0x14;
+}
+#endif /* !CONFIG_XEN */
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/asm-offsets.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/asm-offsets.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/asm-offsets.c Sat Jan 27
14:07:19 2007 -0700
@@ -4,6 +4,7 @@
* to extract and format the required data.
*/
+#include <linux/crypto.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/personality.h>
@@ -54,6 +55,7 @@ void foo(void)
OFFSET(TI_preempt_count, thread_info, preempt_count);
OFFSET(TI_addr_limit, thread_info, addr_limit);
OFFSET(TI_restart_block, thread_info, restart_block);
+ OFFSET(TI_sysenter_return, thread_info, sysenter_return);
BLANK();
OFFSET(EXEC_DOMAIN_handler, exec_domain, handler);
@@ -74,5 +76,7 @@ void foo(void)
#endif
DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
- DEFINE(VSYSCALL_BASE, VSYSCALL_BASE);
+ DEFINE(VDSO_PRELINK, VDSO_PRELINK);
+
+ OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);
}
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/cpu/common-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -11,10 +11,16 @@
#include <asm/msr.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
+#include <asm/mtrr.h>
+#include <asm/mce.h>
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <mach_apic.h>
+#else
+#ifdef CONFIG_XEN
+#define phys_pkg_id(a,b) a
+#endif
#endif
#include <asm/hypervisor.h>
@@ -28,9 +34,10 @@ EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
EXPORT_PER_CPU_SYMBOL(cpu_16bit_stack);
#endif
-static int cachesize_override __devinitdata = -1;
-static int disable_x86_fxsr __devinitdata = 0;
-static int disable_x86_serial_nr __devinitdata = 1;
+static int cachesize_override __cpuinitdata = -1;
+static int disable_x86_fxsr __cpuinitdata;
+static int disable_x86_serial_nr __cpuinitdata = 1;
+static int disable_x86_sep __cpuinitdata;
struct cpu_dev * cpu_devs[X86_VENDOR_NUM] = {};
@@ -62,7 +69,7 @@ static int __init cachesize_setup(char *
}
__setup("cachesize=", cachesize_setup);
-int __devinit get_model_name(struct cpuinfo_x86 *c)
+int __cpuinit get_model_name(struct cpuinfo_x86 *c)
{
unsigned int *v;
char *p, *q;
@@ -92,7 +99,7 @@ int __devinit get_model_name(struct cpui
}
-void __devinit display_cacheinfo(struct cpuinfo_x86 *c)
+void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
{
unsigned int n, dummy, ecx, edx, l2size;
@@ -133,7 +140,7 @@ void __devinit display_cacheinfo(struct
/* in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
*/
/* Look up CPU names by table lookup. */
-static char __devinit *table_lookup_model(struct cpuinfo_x86 *c)
+static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
{
struct cpu_model_info *info;
@@ -154,7 +161,7 @@ static char __devinit *table_lookup_mode
}
-static void __devinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
+static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early)
{
char *v = c->x86_vendor_id;
int i;
@@ -188,6 +195,14 @@ static int __init x86_fxsr_setup(char *
return 1;
}
__setup("nofxsr", x86_fxsr_setup);
+
+
+static int __init x86_sep_setup(char * s)
+{
+ disable_x86_sep = 1;
+ return 1;
+}
+__setup("nosep", x86_sep_setup);
/* Standard macro to see if a specific flag is changeable */
@@ -213,7 +228,7 @@ static inline int flag_is_changeable_p(u
/* Probe for the CPUID instruction */
-static int __devinit have_cpuid_p(void)
+static int __cpuinit have_cpuid_p(void)
{
return flag_is_changeable_p(X86_EFLAGS_ID);
}
@@ -257,10 +272,10 @@ static void __init early_cpu_detect(void
}
}
-void __devinit generic_identify(struct cpuinfo_x86 * c)
+void __cpuinit generic_identify(struct cpuinfo_x86 * c)
{
u32 tfms, xlvl;
- int junk;
+ int ebx;
if (have_cpuid_p()) {
/* Get vendor name */
@@ -276,7 +291,7 @@ void __devinit generic_identify(struct c
/* Intel-defined flags: level 0x00000001 */
if ( c->cpuid_level >= 0x00000001 ) {
u32 capability, excap;
- cpuid(0x00000001, &tfms, &junk, &excap, &capability);
+ cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
c->x86_capability[0] = capability;
c->x86_capability[4] = excap;
c->x86 = (tfms >> 8) & 15;
@@ -286,6 +301,11 @@ void __devinit generic_identify(struct c
if (c->x86 >= 0x6)
c->x86_model += ((tfms >> 16) & 0xF) << 4;
c->x86_mask = tfms & 15;
+#ifdef CONFIG_X86_HT
+ c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0);
+#else
+ c->apicid = (ebx >> 24) & 0xFF;
+#endif
} else {
/* Have CPUID level 0 only - unheard of */
c->x86 = 4;
@@ -306,11 +326,11 @@ void __devinit generic_identify(struct c
early_intel_workaround(c);
#ifdef CONFIG_X86_HT
- phys_proc_id[smp_processor_id()] = (cpuid_ebx(1) >> 24) & 0xff;
-#endif
-}
-
-static void __devinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
+ c->phys_proc_id = (cpuid_ebx(1) >> 24) & 0xff;
+#endif
+}
+
+static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
{
if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr ) {
/* Disable processor serial number */
@@ -338,7 +358,7 @@ __setup("serialnumber", x86_serial_nr_se
/*
* This does the hard work of actually picking apart the CPU stuff...
*/
-void __devinit identify_cpu(struct cpuinfo_x86 *c)
+void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
{
int i;
@@ -408,6 +428,10 @@ void __devinit identify_cpu(struct cpuin
clear_bit(X86_FEATURE_XMM, c->x86_capability);
}
+ /* SEP disabled? */
+ if (disable_x86_sep)
+ clear_bit(X86_FEATURE_SEP, c->x86_capability);
+
if (disable_pse)
clear_bit(X86_FEATURE_PSE, c->x86_capability);
@@ -420,7 +444,7 @@ void __devinit identify_cpu(struct cpuin
else
/* Last resort... */
sprintf(c->x86_model_id, "%02x/%02x",
- c->x86_vendor, c->x86_model);
+ c->x86, c->x86_model);
}
/* Now the feature flags better reflect actual CPU features! */
@@ -456,15 +480,12 @@ void __devinit identify_cpu(struct cpuin
}
#ifdef CONFIG_X86_HT
-void __devinit detect_ht(struct cpuinfo_x86 *c)
+void __cpuinit detect_ht(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
int index_msb, core_bits;
- int cpu = smp_processor_id();
cpuid(1, &eax, &ebx, &ecx, &edx);
-
- c->apicid = phys_pkg_id((ebx >> 24) & 0xFF, 0);
if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY))
return;
@@ -476,16 +497,17 @@ void __devinit detect_ht(struct cpuinfo_
} else if (smp_num_siblings > 1 ) {
if (smp_num_siblings > NR_CPUS) {
- printk(KERN_WARNING "CPU: Unsupported number of the
siblings %d", smp_num_siblings);
+ printk(KERN_WARNING "CPU: Unsupported number of the "
+ "siblings %d", smp_num_siblings);
smp_num_siblings = 1;
return;
}
index_msb = get_count_order(smp_num_siblings);
- phys_proc_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
+ c->phys_proc_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb);
printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
- phys_proc_id[cpu]);
+ c->phys_proc_id);
smp_num_siblings = smp_num_siblings / c->x86_max_cores;
@@ -493,17 +515,17 @@ void __devinit detect_ht(struct cpuinfo_
core_bits = get_count_order(c->x86_max_cores);
- cpu_core_id[cpu] = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) &
+ c->cpu_core_id = phys_pkg_id((ebx >> 24) & 0xFF, index_msb) &
((1 << core_bits) - 1);
if (c->x86_max_cores > 1)
printk(KERN_INFO "CPU: Processor Core ID: %d\n",
- cpu_core_id[cpu]);
- }
-}
-#endif
-
-void __devinit print_cpu_info(struct cpuinfo_x86 *c)
+ c->cpu_core_id);
+ }
+}
+#endif
+
+void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
{
char *vendor = NULL;
@@ -617,6 +639,12 @@ void __cpuinit cpu_init(void)
}
#ifndef CONFIG_XEN
+ /* The CPU hotplug case */
+ if (cpu_gdt_descr->address) {
+ gdt = (struct desc_struct *)cpu_gdt_descr->address;
+ memset(gdt, 0, PAGE_SIZE);
+ goto old_gdt;
+ }
/*
* This is a horrible hack to allocate the GDT. The problem
* is that cpu_init() is called really early for the boot CPU
@@ -635,7 +663,7 @@ void __cpuinit cpu_init(void)
local_irq_enable();
}
}
-
+old_gdt:
/*
* Initialize the per-CPU GDT with the boot GDT,
* and set up the GDT descriptor:
@@ -703,7 +731,7 @@ void __cpuinit cpu_init(void)
}
#ifdef CONFIG_HOTPLUG_CPU
-void __devinit cpu_uninit(void)
+void __cpuinit cpu_uninit(void)
{
int cpu = raw_smp_processor_id();
cpu_clear(cpu, cpu_initialized);
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/cpu/intel_cacheinfo-xen.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/cpu/intel_cacheinfo-xen.c Sat Jan
27 14:07:19 2007 -0700
@@ -0,0 +1,774 @@
+/*
+ * Routines to indentify caches on Intel CPU.
+ *
+ * Changes:
+ * Venkatesh Pallipadi : Adding cache identification through cpuid(4)
+ * Ashok Raj <ashok.raj@xxxxxxxxx>: Work with CPU hotplug
infrastructure.
+ * Andi Kleen : CPUID4 emulation on AMD.
+ */
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/compiler.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+
+#include <asm/processor.h>
+#include <asm/smp.h>
+
+#define LVL_1_INST 1
+#define LVL_1_DATA 2
+#define LVL_2 3
+#define LVL_3 4
+#define LVL_TRACE 5
+
+struct _cache_table
+{
+ unsigned char descriptor;
+ char cache_type;
+ short size;
+};
+
+/* all the cache descriptor types we care about (no TLB or trace cache
entries) */
+static struct _cache_table cache_table[] __cpuinitdata =
+{
+ { 0x06, LVL_1_INST, 8 }, /* 4-way set assoc, 32 byte line size */
+ { 0x08, LVL_1_INST, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x0a, LVL_1_DATA, 8 }, /* 2 way set assoc, 32 byte line size */
+ { 0x0c, LVL_1_DATA, 16 }, /* 4-way set assoc, 32 byte line size */
+ { 0x22, LVL_3, 512 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x23, LVL_3, 1024 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x25, LVL_3, 2048 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x29, LVL_3, 4096 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x2c, LVL_1_DATA, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x30, LVL_1_INST, 32 }, /* 8-way set assoc, 64 byte line size */
+ { 0x39, LVL_2, 128 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x3a, LVL_2, 192 }, /* 6-way set assoc, sectored cache, 64
byte line size */
+ { 0x3b, LVL_2, 128 }, /* 2-way set assoc, sectored cache, 64
byte line size */
+ { 0x3c, LVL_2, 256 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x3d, LVL_2, 384 }, /* 6-way set assoc, sectored cache, 64
byte line size */
+ { 0x3e, LVL_2, 512 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x41, LVL_2, 128 }, /* 4-way set assoc, 32 byte line size */
+ { 0x42, LVL_2, 256 }, /* 4-way set assoc, 32 byte line size */
+ { 0x43, LVL_2, 512 }, /* 4-way set assoc, 32 byte line size */
+ { 0x44, LVL_2, 1024 }, /* 4-way set assoc, 32 byte line size */
+ { 0x45, LVL_2, 2048 }, /* 4-way set assoc, 32 byte line size */
+ { 0x46, LVL_3, 4096 }, /* 4-way set assoc, 64 byte line size */
+ { 0x47, LVL_3, 8192 }, /* 8-way set assoc, 64 byte line size */
+ { 0x49, LVL_3, 4096 }, /* 16-way set assoc, 64 byte line size
*/
+ { 0x4a, LVL_3, 6144 }, /* 12-way set assoc, 64 byte line size
*/
+ { 0x4b, LVL_3, 8192 }, /* 16-way set assoc, 64 byte line size
*/
+ { 0x4c, LVL_3, 12288 }, /* 12-way set assoc, 64 byte line size
*/
+ { 0x4d, LVL_3, 16384 }, /* 16-way set assoc, 64 byte line size
*/
+ { 0x60, LVL_1_DATA, 16 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x66, LVL_1_DATA, 8 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x67, LVL_1_DATA, 16 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x68, LVL_1_DATA, 32 }, /* 4-way set assoc, sectored cache, 64
byte line size */
+ { 0x70, LVL_TRACE, 12 }, /* 8-way set assoc */
+ { 0x71, LVL_TRACE, 16 }, /* 8-way set assoc */
+ { 0x72, LVL_TRACE, 32 }, /* 8-way set assoc */
+ { 0x73, LVL_TRACE, 64 }, /* 8-way set assoc */
+ { 0x78, LVL_2, 1024 }, /* 4-way set assoc, 64 byte line size */
+ { 0x79, LVL_2, 128 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x7a, LVL_2, 256 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x7b, LVL_2, 512 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x7c, LVL_2, 1024 }, /* 8-way set assoc, sectored cache, 64
byte line size */
+ { 0x7d, LVL_2, 2048 }, /* 8-way set assoc, 64 byte line size */
+ { 0x7f, LVL_2, 512 }, /* 2-way set assoc, 64 byte line size */
+ { 0x82, LVL_2, 256 }, /* 8-way set assoc, 32 byte line size */
+ { 0x83, LVL_2, 512 }, /* 8-way set assoc, 32 byte line size */
+ { 0x84, LVL_2, 1024 }, /* 8-way set assoc, 32 byte line size */
+ { 0x85, LVL_2, 2048 }, /* 8-way set assoc, 32 byte line size */
+ { 0x86, LVL_2, 512 }, /* 4-way set assoc, 64 byte line size */
+ { 0x87, LVL_2, 1024 }, /* 8-way set assoc, 64 byte line size */
+ { 0x00, 0, 0}
+};
+
+
+enum _cache_type
+{
+ CACHE_TYPE_NULL = 0,
+ CACHE_TYPE_DATA = 1,
+ CACHE_TYPE_INST = 2,
+ CACHE_TYPE_UNIFIED = 3
+};
+
+union _cpuid4_leaf_eax {
+ struct {
+ enum _cache_type type:5;
+ unsigned int level:3;
+ unsigned int is_self_initializing:1;
+ unsigned int is_fully_associative:1;
+ unsigned int reserved:4;
+ unsigned int num_threads_sharing:12;
+ unsigned int num_cores_on_die:6;
+ } split;
+ u32 full;
+};
+
+union _cpuid4_leaf_ebx {
+ struct {
+ unsigned int coherency_line_size:12;
+ unsigned int physical_line_partition:10;
+ unsigned int ways_of_associativity:10;
+ } split;
+ u32 full;
+};
+
+union _cpuid4_leaf_ecx {
+ struct {
+ unsigned int number_of_sets:32;
+ } split;
+ u32 full;
+};
+
+struct _cpuid4_info {
+ union _cpuid4_leaf_eax eax;
+ union _cpuid4_leaf_ebx ebx;
+ union _cpuid4_leaf_ecx ecx;
+ unsigned long size;
+ cpumask_t shared_cpu_map;
+};
+
+unsigned short num_cache_leaves;
+
+/* AMD doesn't have CPUID4. Emulate it here to report the same
+ information to the user. This makes some assumptions about the machine:
+ No L3, L2 not shared, no SMT etc. that is currently true on AMD CPUs.
+
+ In theory the TLBs could be reported as fake type (they are in "dummy").
+ Maybe later */
+union l1_cache {
+ struct {
+ unsigned line_size : 8;
+ unsigned lines_per_tag : 8;
+ unsigned assoc : 8;
+ unsigned size_in_kb : 8;
+ };
+ unsigned val;
+};
+
+union l2_cache {
+ struct {
+ unsigned line_size : 8;
+ unsigned lines_per_tag : 4;
+ unsigned assoc : 4;
+ unsigned size_in_kb : 16;
+ };
+ unsigned val;
+};
+
+static const unsigned short assocs[] = {
+ [1] = 1, [2] = 2, [4] = 4, [6] = 8,
+ [8] = 16,
+ [0xf] = 0xffff // ??
+ };
+static const unsigned char levels[] = { 1, 1, 2 };
+static const unsigned char types[] = { 1, 2, 3 };
+
+static void __cpuinit amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax,
+ union _cpuid4_leaf_ebx *ebx,
+ union _cpuid4_leaf_ecx *ecx)
+{
+ unsigned dummy;
+ unsigned line_size, lines_per_tag, assoc, size_in_kb;
+ union l1_cache l1i, l1d;
+ union l2_cache l2;
+
+ eax->full = 0;
+ ebx->full = 0;
+ ecx->full = 0;
+
+ cpuid(0x80000005, &dummy, &dummy, &l1d.val, &l1i.val);
+ cpuid(0x80000006, &dummy, &dummy, &l2.val, &dummy);
+
+ if (leaf > 2 || !l1d.val || !l1i.val || !l2.val)
+ return;
+
+ eax->split.is_self_initializing = 1;
+ eax->split.type = types[leaf];
+ eax->split.level = levels[leaf];
+ eax->split.num_threads_sharing = 0;
+ eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
+
+ if (leaf <= 1) {
+ union l1_cache *l1 = leaf == 0 ? &l1d : &l1i;
+ assoc = l1->assoc;
+ line_size = l1->line_size;
+ lines_per_tag = l1->lines_per_tag;
+ size_in_kb = l1->size_in_kb;
+ } else {
+ assoc = l2.assoc;
+ line_size = l2.line_size;
+ lines_per_tag = l2.lines_per_tag;
+ /* cpu_data has errata corrections for K7 applied */
+ size_in_kb = current_cpu_data.x86_cache_size;
+ }
+
+ if (assoc == 0xf)
+ eax->split.is_fully_associative = 1;
+ ebx->split.coherency_line_size = line_size - 1;
+ ebx->split.ways_of_associativity = assocs[assoc] - 1;
+ ebx->split.physical_line_partition = lines_per_tag - 1;
+ ecx->split.number_of_sets = (size_in_kb * 1024) / line_size /
+ (ebx->split.ways_of_associativity + 1) - 1;
+}
+
+static int __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info
*this_leaf)
+{
+ union _cpuid4_leaf_eax eax;
+ union _cpuid4_leaf_ebx ebx;
+ union _cpuid4_leaf_ecx ecx;
+ unsigned edx;
+
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+ amd_cpuid4(index, &eax, &ebx, &ecx);
+ else
+ cpuid_count(4, index, &eax.full, &ebx.full, &ecx.full, &edx);
+ if (eax.split.type == CACHE_TYPE_NULL)
+ return -EIO; /* better error ? */
+
+ this_leaf->eax = eax;
+ this_leaf->ebx = ebx;
+ this_leaf->ecx = ecx;
+ this_leaf->size = (ecx.split.number_of_sets + 1) *
+ (ebx.split.coherency_line_size + 1) *
+ (ebx.split.physical_line_partition + 1) *
+ (ebx.split.ways_of_associativity + 1);
+ return 0;
+}
+
+/* will only be called once; __init is safe here */
+static int __init find_num_cache_leaves(void)
+{
+ unsigned int eax, ebx, ecx, edx;
+ union _cpuid4_leaf_eax cache_eax;
+ int i = -1;
+
+ do {
+ ++i;
+ /* Do cpuid(4) loop to find out num_cache_leaves */
+ cpuid_count(4, i, &eax, &ebx, &ecx, &edx);
+ cache_eax.full = eax;
+ } while (cache_eax.split.type != CACHE_TYPE_NULL);
+ return i;
+}
+
+unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c)
+{
+ unsigned int trace = 0, l1i = 0, l1d = 0, l2 = 0, l3 = 0; /* Cache
sizes */
+ unsigned int new_l1d = 0, new_l1i = 0; /* Cache sizes from cpuid(4) */
+ unsigned int new_l2 = 0, new_l3 = 0, i; /* Cache sizes from cpuid(4) */
+ unsigned int l2_id = 0, l3_id = 0, num_threads_sharing, index_msb;
+#ifdef CONFIG_X86_HT
+ unsigned int cpu = (c == &boot_cpu_data) ? 0 : (c - cpu_data);
+#endif
+
+ if (c->cpuid_level > 3) {
+ static int is_initialized;
+
+ if (is_initialized == 0) {
+ /* Init num_cache_leaves from boot CPU */
+ num_cache_leaves = find_num_cache_leaves();
+ is_initialized++;
+ }
+
+ /*
+ * Whenever possible use cpuid(4), deterministic cache
+ * parameters cpuid leaf to find the cache details
+ */
+ for (i = 0; i < num_cache_leaves; i++) {
+ struct _cpuid4_info this_leaf;
+
+ int retval;
+
+ retval = cpuid4_cache_lookup(i, &this_leaf);
+ if (retval >= 0) {
+ switch(this_leaf.eax.split.level) {
+ case 1:
+ if (this_leaf.eax.split.type ==
+ CACHE_TYPE_DATA)
+ new_l1d = this_leaf.size/1024;
+ else if (this_leaf.eax.split.type ==
+ CACHE_TYPE_INST)
+ new_l1i = this_leaf.size/1024;
+ break;
+ case 2:
+ new_l2 = this_leaf.size/1024;
+ num_threads_sharing = 1 +
this_leaf.eax.split.num_threads_sharing;
+ index_msb =
get_count_order(num_threads_sharing);
+ l2_id = c->apicid >> index_msb;
+ break;
+ case 3:
+ new_l3 = this_leaf.size/1024;
+ num_threads_sharing = 1 +
this_leaf.eax.split.num_threads_sharing;
+ index_msb =
get_count_order(num_threads_sharing);
+ l3_id = c->apicid >> index_msb;
+ break;
+ default:
+ break;
+ }
+ }
+ }
+ }
+ /*
+ * Don't use cpuid2 if cpuid4 is supported. For P4, we use cpuid2 for
+ * trace cache
+ */
+ if ((num_cache_leaves == 0 || c->x86 == 15) && c->cpuid_level > 1) {
+ /* supports eax=2 call */
+ int i, j, n;
+ int regs[4];
+ unsigned char *dp = (unsigned char *)regs;
+ int only_trace = 0;
+
+ if (num_cache_leaves != 0 && c->x86 == 15)
+ only_trace = 1;
+
+ /* Number of times to iterate */
+ n = cpuid_eax(2) & 0xFF;
+
+ for ( i = 0 ; i < n ; i++ ) {
+ cpuid(2, ®s[0], ®s[1], ®s[2], ®s[3]);
+
+ /* If bit 31 is set, this is an unknown format */
+ for ( j = 0 ; j < 3 ; j++ ) {
+ if ( regs[j] < 0 ) regs[j] = 0;
+ }
+
+ /* Byte 0 is level count, not a descriptor */
+ for ( j = 1 ; j < 16 ; j++ ) {
+ unsigned char des = dp[j];
+ unsigned char k = 0;
+
+ /* look up this descriptor in the table */
+ while (cache_table[k].descriptor != 0)
+ {
+ if (cache_table[k].descriptor == des) {
+ if (only_trace &&
cache_table[k].cache_type != LVL_TRACE)
+ break;
+ switch
(cache_table[k].cache_type) {
+ case LVL_1_INST:
+ l1i +=
cache_table[k].size;
+ break;
+ case LVL_1_DATA:
+ l1d +=
cache_table[k].size;
+ break;
+ case LVL_2:
+ l2 +=
cache_table[k].size;
+ break;
+ case LVL_3:
+ l3 +=
cache_table[k].size;
+ break;
+ case LVL_TRACE:
+ trace +=
cache_table[k].size;
+ break;
+ }
+
+ break;
+ }
+
+ k++;
+ }
+ }
+ }
+ }
+
+ if (new_l1d)
+ l1d = new_l1d;
+
+ if (new_l1i)
+ l1i = new_l1i;
+
+ if (new_l2) {
+ l2 = new_l2;
+#ifdef CONFIG_X86_HT
+ cpu_llc_id[cpu] = l2_id;
+#endif
+ }
+
+ if (new_l3) {
+ l3 = new_l3;
+#ifdef CONFIG_X86_HT
+ cpu_llc_id[cpu] = l3_id;
+#endif
+ }
+
+ if (trace)
+ printk (KERN_INFO "CPU: Trace cache: %dK uops", trace);
+ else if ( l1i )
+ printk (KERN_INFO "CPU: L1 I cache: %dK", l1i);
+
+ if (l1d)
+ printk(", L1 D cache: %dK\n", l1d);
+ else
+ printk("\n");
+
+ if (l2)
+ printk(KERN_INFO "CPU: L2 cache: %dK\n", l2);
+
+ if (l3)
+ printk(KERN_INFO "CPU: L3 cache: %dK\n", l3);
+
+ c->x86_cache_size = l3 ? l3 : (l2 ? l2 : (l1i+l1d));
+
+ return l2;
+}
+
+/* pointer to _cpuid4_info array (for each cache leaf) */
+static struct _cpuid4_info *cpuid4_info[NR_CPUS];
+#define CPUID4_INFO_IDX(x,y) (&((cpuid4_info[x])[y]))
+
+#ifdef CONFIG_SMP
+static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index)
+{
+ struct _cpuid4_info *this_leaf, *sibling_leaf;
+ unsigned long num_threads_sharing;
+ int index_msb, i;
+ struct cpuinfo_x86 *c = cpu_data;
+
+ this_leaf = CPUID4_INFO_IDX(cpu, index);
+ num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing;
+
+ if (num_threads_sharing == 1)
+ cpu_set(cpu, this_leaf->shared_cpu_map);
+ else {
+ index_msb = get_count_order(num_threads_sharing);
+
+ for_each_online_cpu(i) {
+ if (c[i].apicid >> index_msb ==
+ c[cpu].apicid >> index_msb) {
+ cpu_set(i, this_leaf->shared_cpu_map);
+ if (i != cpu && cpuid4_info[i]) {
+ sibling_leaf = CPUID4_INFO_IDX(i,
index);
+ cpu_set(cpu,
sibling_leaf->shared_cpu_map);
+ }
+ }
+ }
+ }
+}
+static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
+{
+ struct _cpuid4_info *this_leaf, *sibling_leaf;
+ int sibling;
+
+ this_leaf = CPUID4_INFO_IDX(cpu, index);
+ for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+ sibling_leaf = CPUID4_INFO_IDX(sibling, index);
+ cpu_clear(cpu, sibling_leaf->shared_cpu_map);
+ }
+}
+#else
+static void __init cache_shared_cpu_map_setup(unsigned int cpu, int index) {}
+static void __init cache_remove_shared_cpu_map(unsigned int cpu, int index) {}
+#endif
+
+static void free_cache_attributes(unsigned int cpu)
+{
+ kfree(cpuid4_info[cpu]);
+ cpuid4_info[cpu] = NULL;
+}
+
+static int __cpuinit detect_cache_attributes(unsigned int cpu)
+{
+ struct _cpuid4_info *this_leaf;
+ unsigned long j;
+ int retval;
+ cpumask_t oldmask;
+
+ if (num_cache_leaves == 0)
+ return -ENOENT;
+
+ cpuid4_info[cpu] = kmalloc(
+ sizeof(struct _cpuid4_info) * num_cache_leaves, GFP_KERNEL);
+ if (unlikely(cpuid4_info[cpu] == NULL))
+ return -ENOMEM;
+ memset(cpuid4_info[cpu], 0,
+ sizeof(struct _cpuid4_info) * num_cache_leaves);
+
+ oldmask = current->cpus_allowed;
+ retval = set_cpus_allowed(current, cpumask_of_cpu(cpu));
+ if (retval)
+ goto out;
+
+ /* Do cpuid and store the results */
+ retval = 0;
+ for (j = 0; j < num_cache_leaves; j++) {
+ this_leaf = CPUID4_INFO_IDX(cpu, j);
+ retval = cpuid4_cache_lookup(j, this_leaf);
+ if (unlikely(retval < 0))
+ break;
+ cache_shared_cpu_map_setup(cpu, j);
+ }
+ set_cpus_allowed(current, oldmask);
+
+out:
+ if (retval)
+ free_cache_attributes(cpu);
+ return retval;
+}
+
+#ifdef CONFIG_SYSFS
+
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+extern struct sysdev_class cpu_sysdev_class; /* from drivers/base/cpu.c */
+
+/* pointer to kobject for cpuX/cache */
+static struct kobject * cache_kobject[NR_CPUS];
+
+struct _index_kobject {
+ struct kobject kobj;
+ unsigned int cpu;
+ unsigned short index;
+};
+
+/* pointer to array of kobjects for cpuX/cache/indexY */
+static struct _index_kobject *index_kobject[NR_CPUS];
+#define INDEX_KOBJECT_PTR(x,y) (&((index_kobject[x])[y]))
+
+#define show_one_plus(file_name, object, val) \
+static ssize_t show_##file_name
\
+ (struct _cpuid4_info *this_leaf, char *buf) \
+{ \
+ return sprintf (buf, "%lu\n", (unsigned long)this_leaf->object + val); \
+}
+
+show_one_plus(level, eax.split.level, 0);
+show_one_plus(coherency_line_size, ebx.split.coherency_line_size, 1);
+show_one_plus(physical_line_partition, ebx.split.physical_line_partition, 1);
+show_one_plus(ways_of_associativity, ebx.split.ways_of_associativity, 1);
+show_one_plus(number_of_sets, ecx.split.number_of_sets, 1);
+
+static ssize_t show_size(struct _cpuid4_info *this_leaf, char *buf)
+{
+ return sprintf (buf, "%luK\n", this_leaf->size / 1024);
+}
+
+static ssize_t show_shared_cpu_map(struct _cpuid4_info *this_leaf, char *buf)
+{
+ char mask_str[NR_CPUS];
+ cpumask_scnprintf(mask_str, NR_CPUS, this_leaf->shared_cpu_map);
+ return sprintf(buf, "%s\n", mask_str);
+}
+
+static ssize_t show_type(struct _cpuid4_info *this_leaf, char *buf) {
+ switch(this_leaf->eax.split.type) {
+ case CACHE_TYPE_DATA:
+ return sprintf(buf, "Data\n");
+ break;
+ case CACHE_TYPE_INST:
+ return sprintf(buf, "Instruction\n");
+ break;
+ case CACHE_TYPE_UNIFIED:
+ return sprintf(buf, "Unified\n");
+ break;
+ default:
+ return sprintf(buf, "Unknown\n");
+ break;
+ }
+}
+
+struct _cache_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct _cpuid4_info *, char *);
+ ssize_t (*store)(struct _cpuid4_info *, const char *, size_t count);
+};
+
+#define define_one_ro(_name) \
+static struct _cache_attr _name = \
+ __ATTR(_name, 0444, show_##_name, NULL)
+
+define_one_ro(level);
+define_one_ro(type);
+define_one_ro(coherency_line_size);
+define_one_ro(physical_line_partition);
+define_one_ro(ways_of_associativity);
+define_one_ro(number_of_sets);
+define_one_ro(size);
+define_one_ro(shared_cpu_map);
+
+static struct attribute * default_attrs[] = {
+ &type.attr,
+ &level.attr,
+ &coherency_line_size.attr,
+ &physical_line_partition.attr,
+ &ways_of_associativity.attr,
+ &number_of_sets.attr,
+ &size.attr,
+ &shared_cpu_map.attr,
+ NULL
+};
+
+#define to_object(k) container_of(k, struct _index_kobject, kobj)
+#define to_attr(a) container_of(a, struct _cache_attr, attr)
+
+static ssize_t show(struct kobject * kobj, struct attribute * attr, char * buf)
+{
+ struct _cache_attr *fattr = to_attr(attr);
+ struct _index_kobject *this_leaf = to_object(kobj);
+ ssize_t ret;
+
+ ret = fattr->show ?
+ fattr->show(CPUID4_INFO_IDX(this_leaf->cpu, this_leaf->index),
+ buf) :
+ 0;
+ return ret;
+}
+
+static ssize_t store(struct kobject * kobj, struct attribute * attr,
+ const char * buf, size_t count)
+{
+ return 0;
+}
+
+static struct sysfs_ops sysfs_ops = {
+ .show = show,
+ .store = store,
+};
+
+static struct kobj_type ktype_cache = {
+ .sysfs_ops = &sysfs_ops,
+ .default_attrs = default_attrs,
+};
+
+static struct kobj_type ktype_percpu_entry = {
+ .sysfs_ops = &sysfs_ops,
+};
+
+static void cpuid4_cache_sysfs_exit(unsigned int cpu)
+{
+ kfree(cache_kobject[cpu]);
+ kfree(index_kobject[cpu]);
+ cache_kobject[cpu] = NULL;
+ index_kobject[cpu] = NULL;
+ free_cache_attributes(cpu);
+}
+
+static int __cpuinit cpuid4_cache_sysfs_init(unsigned int cpu)
+{
+
+ if (num_cache_leaves == 0)
+ return -ENOENT;
+
+ detect_cache_attributes(cpu);
+ if (cpuid4_info[cpu] == NULL)
+ return -ENOENT;
+
+ /* Allocate all required memory */
+ cache_kobject[cpu] = kmalloc(sizeof(struct kobject), GFP_KERNEL);
+ if (unlikely(cache_kobject[cpu] == NULL))
+ goto err_out;
+ memset(cache_kobject[cpu], 0, sizeof(struct kobject));
+
+ index_kobject[cpu] = kmalloc(
+ sizeof(struct _index_kobject ) * num_cache_leaves, GFP_KERNEL);
+ if (unlikely(index_kobject[cpu] == NULL))
+ goto err_out;
+ memset(index_kobject[cpu], 0,
+ sizeof(struct _index_kobject) * num_cache_leaves);
+
+ return 0;
+
+err_out:
+ cpuid4_cache_sysfs_exit(cpu);
+ return -ENOMEM;
+}
+
+/* Add/Remove cache interface for CPU device */
+static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i, j;
+ struct _index_kobject *this_object;
+ int retval = 0;
+
+ retval = cpuid4_cache_sysfs_init(cpu);
+ if (unlikely(retval < 0))
+ return retval;
+
+ cache_kobject[cpu]->parent = &sys_dev->kobj;
+ kobject_set_name(cache_kobject[cpu], "%s", "cache");
+ cache_kobject[cpu]->ktype = &ktype_percpu_entry;
+ retval = kobject_register(cache_kobject[cpu]);
+
+ for (i = 0; i < num_cache_leaves; i++) {
+ this_object = INDEX_KOBJECT_PTR(cpu,i);
+ this_object->cpu = cpu;
+ this_object->index = i;
+ this_object->kobj.parent = cache_kobject[cpu];
+ kobject_set_name(&(this_object->kobj), "index%1lu", i);
+ this_object->kobj.ktype = &ktype_cache;
+ retval = kobject_register(&(this_object->kobj));
+ if (unlikely(retval)) {
+ for (j = 0; j < i; j++) {
+ kobject_unregister(
+ &(INDEX_KOBJECT_PTR(cpu,j)->kobj));
+ }
+ kobject_unregister(cache_kobject[cpu]);
+ cpuid4_cache_sysfs_exit(cpu);
+ break;
+ }
+ }
+ return retval;
+}
+
+static void __cpuexit cache_remove_dev(struct sys_device * sys_dev)
+{
+ unsigned int cpu = sys_dev->id;
+ unsigned long i;
+
+ for (i = 0; i < num_cache_leaves; i++) {
+ cache_remove_shared_cpu_map(cpu, i);
+ kobject_unregister(&(INDEX_KOBJECT_PTR(cpu,i)->kobj));
+ }
+ kobject_unregister(cache_kobject[cpu]);
+ cpuid4_cache_sysfs_exit(cpu);
+ return;
+}
+
+static int __cpuinit cacheinfo_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+ struct sys_device *sys_dev;
+
+ sys_dev = get_cpu_sysdev(cpu);
+ switch (action) {
+ case CPU_ONLINE:
+ cache_add_dev(sys_dev);
+ break;
+ case CPU_DEAD:
+ cache_remove_dev(sys_dev);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata cacheinfo_cpu_notifier =
+{
+ .notifier_call = cacheinfo_cpu_callback,
+};
+
+static int __cpuinit cache_sysfs_init(void)
+{
+ int i;
+
+ if (num_cache_leaves == 0)
+ return 0;
+
+ register_hotcpu_notifier(&cacheinfo_cpu_notifier);
+
+ for_each_online_cpu(i) {
+ cacheinfo_cpu_callback(&cacheinfo_cpu_notifier, CPU_ONLINE,
+ (void *)(long)i);
+ }
+
+ return 0;
+}
+
+device_initcall(cache_sysfs_init);
+
+#endif
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/cpu/mtrr/main-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -4,11 +4,12 @@
#include <linux/module.h>
#include <linux/seq_file.h>
#include <asm/uaccess.h>
+#include <linux/mutex.h>
#include <asm/mtrr.h>
#include "mtrr.h"
-static DECLARE_MUTEX(mtrr_sem);
+static DEFINE_MUTEX(mtrr_mutex);
void generic_get_mtrr(unsigned int reg, unsigned long *base,
unsigned int *size, mtrr_type * type)
@@ -65,7 +66,7 @@ int mtrr_add_page(unsigned long base, un
int error;
dom0_op_t op;
- down(&mtrr_sem);
+ mutex_lock(&mtrr_mutex);
op.cmd = DOM0_ADD_MEMTYPE;
op.u.add_memtype.mfn = base;
@@ -73,7 +74,7 @@ int mtrr_add_page(unsigned long base, un
op.u.add_memtype.type = type;
error = HYPERVISOR_dom0_op(&op);
if (error) {
- up(&mtrr_sem);
+ mutex_unlock(&mtrr_mutex);
BUG_ON(error > 0);
return error;
}
@@ -81,7 +82,7 @@ int mtrr_add_page(unsigned long base, un
if (increment)
++usage_table[op.u.add_memtype.reg];
- up(&mtrr_sem);
+ mutex_unlock(&mtrr_mutex);
return op.u.add_memtype.reg;
}
@@ -118,7 +119,7 @@ int mtrr_del_page(int reg, unsigned long
int error = -EINVAL;
dom0_op_t op;
- down(&mtrr_sem);
+ mutex_lock(&mtrr_mutex);
if (reg < 0) {
/* Search for existing MTRR */
@@ -151,7 +152,7 @@ int mtrr_del_page(int reg, unsigned long
}
error = reg;
out:
- up(&mtrr_sem);
+ mutex_unlock(&mtrr_mutex);
return error;
}
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/crash.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/crash.c Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/crash.c Sat Jan 27 14:07:19
2007 -0700
@@ -69,7 +69,7 @@ static void crash_save_this_cpu(struct p
* for the data I pass, and I need tags
* on the data to indicate what information I have
* squirrelled away. ELF notes happen to provide
- * all of that that no need to invent something new.
+ * all of that, so there is no need to invent something new.
*/
buf = (u32*)per_cpu_ptr(crash_notes, cpu);
if (!buf)
@@ -91,7 +91,7 @@ static void crash_save_self(struct pt_re
}
#ifndef CONFIG_XEN
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
static atomic_t waiting_for_crash_ipi;
static int crash_nmi_callback(struct pt_regs *regs, int cpu)
@@ -106,7 +106,7 @@ static int crash_nmi_callback(struct pt_
return 1;
local_irq_disable();
- if (!user_mode(regs)) {
+ if (!user_mode_vm(regs)) {
crash_fixup_ss_esp(&fixed_regs, regs);
regs = &fixed_regs;
}
@@ -115,19 +115,15 @@ static int crash_nmi_callback(struct pt_
atomic_dec(&waiting_for_crash_ipi);
/* Assume hlt works */
halt();
- for(;;);
+ for (;;)
+ cpu_relax();
return 1;
}
-/*
- * By using the NMI code instead of a vector we just sneak thru the
- * word generator coming out with just what we want. AND it does
- * not matter if clustered_apic_mode is set or not.
- */
static void smp_send_nmi_allbutself(void)
{
- send_IPI_allbutself(APIC_DM_NMI);
+ send_IPI_allbutself(NMI_VECTOR);
}
static void nmi_shootdown_cpus(void)
@@ -164,7 +160,7 @@ void machine_crash_shutdown(struct pt_re
void machine_crash_shutdown(struct pt_regs *regs)
{
/* This function is only called after the system
- * has paniced or is otherwise in a critical state.
+ * has panicked or is otherwise in a critical state.
* The minimum amount of code to allow a kexec'd kernel
* to run successfully needs to happen here.
*
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S
--- a/linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/entry-xen.S Sat Jan 27 14:07:19
2007 -0700
@@ -40,14 +40,15 @@
* "current" is in register %ebx during any slow entries.
*/
-#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
+#include <asm/irqflags.h>
#include <asm/errno.h>
#include <asm/segment.h>
#include <asm/smp.h>
#include <asm/page.h>
#include <asm/desc.h>
+#include <asm/dwarf2.h>
#include "irq_vectors.h"
#include <xen/interface/xen.h>
@@ -106,40 +107,91 @@ NMI_MASK = 0x80000000
#endif
#ifdef CONFIG_PREEMPT
-#define preempt_stop cli
+#define preempt_stop cli; TRACE_IRQS_OFF
#else
#define preempt_stop
#define resume_kernel restore_nocheck
#endif
+.macro TRACE_IRQS_IRET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ testl $IF_MASK,EFLAGS(%esp) # interrupts off?
+ jz 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+#ifdef CONFIG_VM86
+#define resume_userspace_sig check_userspace
+#else
+#define resume_userspace_sig resume_userspace
+#endif
+
#define SAVE_ALL \
cld; \
pushl %es; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET es, 0;*/\
pushl %ds; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ /*CFI_REL_OFFSET ds, 0;*/\
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET eax, 0;\
pushl %ebp; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebp, 0;\
pushl %edi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edi, 0;\
pushl %esi; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET esi, 0;\
pushl %edx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET edx, 0;\
pushl %ecx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ecx, 0;\
pushl %ebx; \
+ CFI_ADJUST_CFA_OFFSET 4;\
+ CFI_REL_OFFSET ebx, 0;\
movl $(__USER_DS), %edx; \
movl %edx, %ds; \
movl %edx, %es;
#define RESTORE_INT_REGS \
popl %ebx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebx;\
popl %ecx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ecx;\
popl %edx; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edx;\
popl %esi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE esi;\
popl %edi; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE edi;\
popl %ebp; \
- popl %eax
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE ebp;\
+ popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ CFI_RESTORE eax
#define RESTORE_REGS \
RESTORE_INT_REGS; \
1: popl %ds; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE ds;*/\
2: popl %es; \
+ CFI_ADJUST_CFA_OFFSET -4;\
+ /*CFI_RESTORE es;*/\
.section .fixup,"ax"; \
3: movl $0,(%esp); \
jmp 1b; \
@@ -152,13 +204,47 @@ 4: movl $0,(%esp); \
.long 2b,4b; \
.previous
+#define RING0_INT_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, 3*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_EC_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, 4*4;\
+ /*CFI_OFFSET cs, -2*4;*/\
+ CFI_OFFSET eip, -3*4
+
+#define RING0_PTREGS_FRAME \
+ CFI_STARTPROC simple;\
+ CFI_DEF_CFA esp, OLDESP-EBX;\
+ /*CFI_OFFSET cs, CS-OLDESP;*/\
+ CFI_OFFSET eip, EIP-OLDESP;\
+ /*CFI_OFFSET es, ES-OLDESP;*/\
+ /*CFI_OFFSET ds, DS-OLDESP;*/\
+ CFI_OFFSET eax, EAX-OLDESP;\
+ CFI_OFFSET ebp, EBP-OLDESP;\
+ CFI_OFFSET edi, EDI-OLDESP;\
+ CFI_OFFSET esi, ESI-OLDESP;\
+ CFI_OFFSET edx, EDX-OLDESP;\
+ CFI_OFFSET ecx, ECX-OLDESP;\
+ CFI_OFFSET ebx, EBX-OLDESP
ENTRY(ret_from_fork)
+ CFI_STARTPROC
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
call schedule_tail
GET_THREAD_INFO(%ebp)
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
+ pushl $0x0202 # Reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET 4
+ popfl
+ CFI_ADJUST_CFA_OFFSET -4
jmp syscall_exit
+ CFI_ENDPROC
/*
* Return to user mode is not as complex as all this looks,
@@ -169,10 +255,12 @@ ENTRY(ret_from_fork)
# userspace resumption stub bypassing syscall exit tracing
ALIGN
+ RING0_PTREGS_FRAME
ret_from_exception:
preempt_stop
ret_from_intr:
GET_THREAD_INFO(%ebp)
+check_userspace:
movl EFLAGS(%esp), %eax # mix EFLAGS and CS
movb CS(%esp), %al
testl $(VM_MASK | 2), %eax
@@ -201,20 +289,42 @@ need_resched:
call preempt_schedule_irq
jmp need_resched
#endif
+ CFI_ENDPROC
/* SYSENTER_RETURN points to after the "sysenter" instruction in
the vsyscall page. See vsyscall-sysentry.S, which defines the symbol. */
# sysenter call handler stub
ENTRY(sysenter_entry)
+ CFI_STARTPROC simple
+ CFI_DEF_CFA esp, 0
+ CFI_REGISTER esp, ebp
movl SYSENTER_stack_esp0(%esp),%esp
sysenter_past_esp:
+ /*
+ * No need to follow this irqs on/off section: the syscall
+ * disabled irqs and here we enable it straight after entry:
+ */
sti
pushl $(__USER_DS)
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ss, 0*/
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esp, 0
pushfl
+ CFI_ADJUST_CFA_OFFSET 4
pushl $(__USER_CS)
- pushl $SYSENTER_RETURN
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET cs, 0*/
+ /*
+ * Push current_thread_info()->sysenter_return to the stack.
+ * A tiny bit of offset fixup is necessary - 4*4 means the 4 words
+ * pushed above; +8 corresponds to copy_thread's esp0 setting.
+ */
+ pushl (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eip, 0
/*
* Load the potential sixth argument from user stack.
@@ -229,6 +339,7 @@ 1: movl (%ebp),%ebp
.previous
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
@@ -240,6 +351,7 @@ 1: movl (%ebp),%ebp
call *sys_call_table(,%eax,4)
movl %eax,EAX(%esp)
DISABLE_INTERRUPTS
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx
jne syscall_exit_work
@@ -248,6 +360,7 @@ 1: movl (%ebp),%ebp
movl OLDESP(%esp), %ecx
xorl %ebp,%ebp
#ifdef CONFIG_XEN
+ TRACE_IRQS_ON
__ENABLE_INTERRUPTS
sysexit_scrit: /**** START OF SYSEXIT CRITICAL REGION ****/
__TEST_PENDING
@@ -261,16 +374,24 @@ sysexit_ecrit: /**** END OF SYSEXIT CRIT
add $4,%esp
jmp ret_from_intr
#else
+ TRACE_IRQS_ON
sti
sysexit
#endif /* !CONFIG_XEN */
+ CFI_ENDPROC
# system call handler stub
ENTRY(system_call)
+ RING0_INT_FRAME # can't unwind into user space anyway
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
+ testl $TF_MASK,EFLAGS(%esp)
+ jz no_singlestep
+ orl $_TIF_SINGLESTEP,TI_flags(%ebp)
+no_singlestep:
# system call tracing in operation /
emulation
/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not
testb */
testw
$(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
@@ -284,6 +405,7 @@ syscall_exit:
DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
testw $_TIF_ALLWORK_MASK, %cx # current->work
jne syscall_exit_work
@@ -298,6 +420,7 @@ restore_all:
movb CS(%esp), %al
andl $(VM_MASK | (4 << 8) | 3), %eax
cmpl $((4 << 8) | 3), %eax
+ CFI_REMEMBER_STATE
je ldt_ss # returning to user-space with LDT SS
restore_nocheck:
#else
@@ -311,12 +434,16 @@ restore_nocheck:
andb $1,%al # EAX[0] == IRET_EFLAGS.IF & event_mask
jnz restore_all_enable_events # != 0 => enable event delivery
#endif
+ TRACE_IRQS_IRET
+restore_nocheck_notrace:
RESTORE_REGS
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
1: iret
.section .fixup,"ax"
iret_exc:
#ifndef CONFIG_XEN
+ TRACE_IRQS_ON
sti
#endif
pushl $0 # no error code
@@ -329,6 +456,7 @@ iret_exc:
.previous
#ifndef CONFIG_XEN
+ CFI_RESTORE_STATE
ldt_ss:
larl OLDSS(%esp), %eax
jnz restore_nocheck
@@ -341,11 +469,15 @@ ldt_ss:
* CPUs, which we can try to work around to make
* dosemu and wine happy. */
subl $8, %esp # reserve space for switch16 pointer
+ CFI_ADJUST_CFA_OFFSET 8
cli
+ TRACE_IRQS_OFF
movl %esp, %eax
/* Set up the 16bit stack frame with switch32 pointer on top,
* and a switch16 pointer on top of the current frame. */
call setup_x86_bogus_stack
+ CFI_ADJUST_CFA_OFFSET -8 # frame has moved
+ TRACE_IRQS_IRET
RESTORE_REGS
lss 20+4(%esp), %esp # switch to 16bit stack
1: iret
@@ -353,6 +485,7 @@ 1: iret
.align 4
.long 1b,iret_exc
.previous
+ CFI_ENDPROC
#else
hypervisor_iret:
andl $~NMI_MASK, EFLAGS(%esp)
@@ -363,6 +496,7 @@ hypervisor_iret:
# perform work that needs to be done immediately before resumption
ALIGN
+ RING0_PTREGS_FRAME # can't unwind into user space anyway
work_pending:
testb $_TIF_NEED_RESCHED, %cl
jz work_notifysig
@@ -371,6 +505,7 @@ work_resched:
DISABLE_INTERRUPTS # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done other
# than syscall tracing?
@@ -386,18 +521,20 @@ work_notifysig: # deal with
pending s
# vm86-space
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
ALIGN
work_notifysig_v86:
#ifdef CONFIG_VM86
pushl %ecx # save ti_flags for do_notify_resume
+ CFI_ADJUST_CFA_OFFSET 4
call save_v86_state # %eax contains pt_regs pointer
popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
movl %eax, %esp
xorl %edx, %edx
call do_notify_resume
- jmp resume_userspace
+ jmp resume_userspace_sig
#endif
# perform syscall exit tracing
@@ -420,25 +557,28 @@ syscall_exit_work:
syscall_exit_work:
testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
jz work_pending
+ TRACE_IRQS_ON
ENABLE_INTERRUPTS # could let do_syscall_trace() call
# schedule() instead
movl %esp, %eax
movl $1, %edx
call do_syscall_trace
jmp resume_userspace
-
- ALIGN
+ CFI_ENDPROC
+
+ RING0_INT_FRAME # can't unwind into user space anyway
syscall_fault:
pushl %eax # save orig_eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
GET_THREAD_INFO(%ebp)
movl $-EFAULT,EAX(%esp)
jmp resume_userspace
- ALIGN
syscall_badsys:
movl $-ENOSYS,EAX(%esp)
jmp resume_userspace
+ CFI_ENDPROC
#ifndef CONFIG_XEN
#define FIXUP_ESPFIX_STACK \
@@ -451,16 +591,21 @@ syscall_badsys:
movl %eax, %esp;
#define UNWIND_ESPFIX_STACK \
pushl %eax; \
+ CFI_ADJUST_CFA_OFFSET 4; \
movl %ss, %eax; \
/* see if on 16bit stack */ \
cmpw $__ESPFIX_SS, %ax; \
- jne 28f; \
- movl $__KERNEL_DS, %edx; \
- movl %edx, %ds; \
- movl %edx, %es; \
+ je 28f; \
+27: popl %eax; \
+ CFI_ADJUST_CFA_OFFSET -4; \
+.section .fixup,"ax"; \
+28: movl $__KERNEL_DS, %eax; \
+ movl %eax, %ds; \
+ movl %eax, %es; \
/* switch to 32bit stack */ \
- FIXUP_ESPFIX_STACK \
-28: popl %eax;
+ FIXUP_ESPFIX_STACK; \
+ jmp 27b; \
+.previous
/*
* Build the entry stubs and pointer table with
@@ -472,9 +617,14 @@ ENTRY(interrupt)
vector=0
ENTRY(irq_entries_start)
+ RING0_INT_FRAME
.rept NR_IRQS
ALIGN
+ .if vector
+ CFI_ADJUST_CFA_OFFSET -4
+ .endif
1: pushl $~(vector)
+ CFI_ADJUST_CFA_OFFSET 4
jmp common_interrupt
.data
.long 1b
@@ -482,20 +632,30 @@ vector=vector+1
vector=vector+1
.endr
+/*
+ * the CPU automatically disables interrupts when executing an IRQ vector,
+ * so IRQ-flags tracing has to follow that:
+ */
ALIGN
common_interrupt:
SAVE_ALL
+ TRACE_IRQS_OFF
movl %esp,%eax
call do_IRQ
jmp ret_from_intr
+ CFI_ENDPROC
#define BUILD_INTERRUPT(name, nr) \
ENTRY(name) \
+ RING0_INT_FRAME; \
pushl $~(nr); \
- SAVE_ALL \
+ CFI_ADJUST_CFA_OFFSET 4; \
+ SAVE_ALL; \
+ TRACE_IRQS_OFF \
movl %esp,%eax; \
call smp_/**/name; \
- jmp ret_from_intr;
+ jmp ret_from_intr; \
+ CFI_ENDPROC
/* The include is where all of the SMP etc. interrupts come from */
#include "entry_arch.h"
@@ -504,34 +664,59 @@ ENTRY(name) \
#endif
ENTRY(divide_error)
+ RING0_INT_FRAME
pushl $0 # no error code
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_divide_error
+ CFI_ADJUST_CFA_OFFSET 4
ALIGN
error_code:
pushl %ds
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET ds, 0*/
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET eax, 0
xorl %eax, %eax
pushl %ebp
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebp, 0
pushl %edi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edi, 0
pushl %esi
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET esi, 0
pushl %edx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET edx, 0
decl %eax # eax = -1
pushl %ecx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ecx, 0
pushl %ebx
+ CFI_ADJUST_CFA_OFFSET 4
+ CFI_REL_OFFSET ebx, 0
cld
pushl %es
+ CFI_ADJUST_CFA_OFFSET 4
+ /*CFI_REL_OFFSET es, 0*/
UNWIND_ESPFIX_STACK
popl %ecx
+ CFI_ADJUST_CFA_OFFSET -4
+ /*CFI_REGISTER es, ecx*/
movl ES(%esp), %edi # get the function address
movl ORIG_EAX(%esp), %edx # get the error code
movl %eax, ORIG_EAX(%esp)
movl %ecx, ES(%esp)
+ /*CFI_REL_OFFSET es, ES*/
movl $(__USER_DS), %ecx
movl %ecx, %ds
movl %ecx, %es
movl %esp,%eax # pt_regs pointer
call *%edi
jmp ret_from_exception
+ CFI_ENDPROC
#ifdef CONFIG_XEN
# A note on the "critical region" in our callback handler.
@@ -680,31 +865,44 @@ 9: xorl %eax,%eax; \
#endif
ENTRY(coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_error
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(simd_coprocessor_error)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_simd_coprocessor_error
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(device_not_available)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
#ifndef CONFIG_XEN
movl %cr0, %eax
testl $0x4, %eax # EM (math emulation bit)
je device_available_emulate
pushl $0 # temporary storage for ORIG_EIP
+ CFI_ADJUST_CFA_OFFSET 4
call math_emulate
addl $4, %esp
+ CFI_ADJUST_CFA_OFFSET -4
jmp ret_from_exception
device_available_emulate:
#endif
preempt_stop
call math_state_restore
jmp ret_from_exception
+ CFI_ENDPROC
#ifndef CONFIG_XEN
/*
@@ -731,6 +929,7 @@ label: \
#endif /* CONFIG_XEN */
KPROBE_ENTRY(debug)
+ RING0_INT_FRAME
#ifndef CONFIG_XEN
cmpl $sysenter_entry,(%esp)
jne debug_stack_correct
@@ -738,13 +937,14 @@ debug_stack_correct:
debug_stack_correct:
#endif /* !CONFIG_XEN */
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # error code 0
movl %esp,%eax # pt_regs pointer
call do_debug
jmp ret_from_exception
+ CFI_ENDPROC
.previous .text
-
#ifndef CONFIG_XEN
/*
* NMI is doubly nasty. It can happen _while_ we're handling
@@ -755,14 +955,18 @@ debug_stack_correct:
* fault happened on the sysenter path.
*/
ENTRY(nmi)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %ss, %eax
cmpw $__ESPFIX_SS, %ax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
je nmi_16bit_stack
cmpl $sysenter_entry,(%esp)
je nmi_stack_fixup
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
movl %esp,%eax
/* Do not access memory above the end of our stack page,
* it might not exist.
@@ -770,16 +974,19 @@ ENTRY(nmi)
andl $(THREAD_SIZE-1),%eax
cmpl $(THREAD_SIZE-20),%eax
popl %eax
+ CFI_ADJUST_CFA_OFFSET -4
jae nmi_stack_correct
cmpl $sysenter_entry,12(%esp)
je nmi_debug_stack_check
nmi_stack_correct:
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
- jmp restore_all
+ jmp restore_nocheck_notrace
+ CFI_ENDPROC
nmi_stack_fixup:
FIX_STACK(12,nmi_stack_correct, 1)
@@ -795,98 +1002,191 @@ nmi_debug_stack_check:
jmp nmi_stack_correct
nmi_16bit_stack:
+ RING0_INT_FRAME
/* create the pointer to lss back */
pushl %ss
+ CFI_ADJUST_CFA_OFFSET 4
pushl %esp
+ CFI_ADJUST_CFA_OFFSET 4
movzwl %sp, %esp
addw $4, (%esp)
/* copy the iret frame of 12 bytes */
.rept 3
pushl 16(%esp)
+ CFI_ADJUST_CFA_OFFSET 4
.endr
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
FIXUP_ESPFIX_STACK # %eax == %esp
+ CFI_ADJUST_CFA_OFFSET -20 # the frame has now moved
xorl %edx,%edx # zero error code
call do_nmi
RESTORE_REGS
lss 12+4(%esp), %esp # back to 16bit stack
1: iret
+ CFI_ENDPROC
.section __ex_table,"a"
.align 4
.long 1b,iret_exc
.previous
#else
ENTRY(nmi)
+ RING0_INT_FRAME
pushl %eax
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_nmi
orl $NMI_MASK, EFLAGS(%esp)
jmp restore_all
+ CFI_ENDPROC
#endif
KPROBE_ENTRY(int3)
+ RING0_INT_FRAME
pushl $-1 # mark this as an int
+ CFI_ADJUST_CFA_OFFSET 4
SAVE_ALL
xorl %edx,%edx # zero error code
movl %esp,%eax # pt_regs pointer
call do_int3
jmp ret_from_exception
+ CFI_ENDPROC
.previous .text
ENTRY(overflow)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_overflow
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(bounds)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_bounds
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_op)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_invalid_op
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(coprocessor_segment_overrun)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl $do_coprocessor_segment_overrun
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(invalid_TSS)
+ RING0_EC_FRAME
pushl $do_invalid_TSS
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(segment_not_present)
+ RING0_EC_FRAME
pushl $do_segment_not_present
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
ENTRY(stack_segment)
+ RING0_EC_FRAME
pushl $do_stack_segment
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
KPROBE_ENTRY(general_protection)
+ RING0_EC_FRAME
pushl $do_general_protection
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
.previous .text
ENTRY(alignment_check)
+ RING0_EC_FRAME
pushl $do_alignment_check
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
KPROBE_ENTRY(page_fault)
+ RING0_EC_FRAME
pushl $do_page_fault
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
.previous .text
#ifdef CONFIG_X86_MCE
ENTRY(machine_check)
+ RING0_INT_FRAME
pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
pushl machine_check_vector
- jmp error_code
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+#endif
+
+#ifndef CONFIG_XEN
+ENTRY(spurious_interrupt_bug)
+ RING0_INT_FRAME
+ pushl $0
+ CFI_ADJUST_CFA_OFFSET 4
+ pushl $do_spurious_interrupt_bug
+ CFI_ADJUST_CFA_OFFSET 4
+ jmp error_code
+ CFI_ENDPROC
+#endif /* !CONFIG_XEN */
+
+#ifdef CONFIG_STACK_UNWIND
+ENTRY(arch_unwind_init_running)
+ CFI_STARTPROC
+ movl 4(%esp), %edx
+ movl (%esp), %ecx
+ leal 4(%esp), %eax
+ movl %ebx, EBX(%edx)
+ xorl %ebx, %ebx
+ movl %ebx, ECX(%edx)
+ movl %ebx, EDX(%edx)
+ movl %esi, ESI(%edx)
+ movl %edi, EDI(%edx)
+ movl %ebp, EBP(%edx)
+ movl %ebx, EAX(%edx)
+ movl $__USER_DS, DS(%edx)
+ movl $__USER_DS, ES(%edx)
+ movl %ebx, ORIG_EAX(%edx)
+ movl %ecx, EIP(%edx)
+ movl 12(%esp), %ecx
+ movl $__KERNEL_CS, CS(%edx)
+ movl %ebx, EFLAGS(%edx)
+ movl %eax, OLDESP(%edx)
+ movl 8(%esp), %eax
+ movl %ecx, 8(%esp)
+ movl EBX(%edx), %ebx
+ movl $__KERNEL_DS, OLDSS(%edx)
+ jmpl *%eax
+ CFI_ENDPROC
+ENDPROC(arch_unwind_init_running)
#endif
ENTRY(fixup_4gb_segment)
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S
--- a/linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/head-xen.S Sat Jan 27 14:07:19
2007 -0700
@@ -1,12 +1,12 @@
.text
-#include <linux/config.h>
#include <linux/elfnote.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
+#include <asm/cache.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <xen/interface/xen.h>
@@ -61,7 +61,8 @@ ENTRY(startup_32)
movl %eax,%gs
cld # gcc2 wants the direction flag cleared at all
times
- call start_kernel
+ pushl %eax # fake return address
+ jmp start_kernel
L6:
jmp L6 # main should never return here, but
# just in case, we know what happens.
@@ -92,6 +93,7 @@ ENTRY(empty_zero_page)
/*
* The Global Descriptor Table contains 28 quadwords, per-CPU.
*/
+ .align L1_CACHE_BYTES
ENTRY(cpu_gdt_table)
.quad 0x0000000000000000 /* NULL descriptor */
.quad 0x0000000000000000 /* 0x0b reserved */
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/io_apic-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -25,7 +25,6 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/sched.h>
-#include <linux/config.h>
#include <linux/smp_lock.h>
#include <linux/mc146818rtc.h>
#include <linux/compiler.h>
@@ -38,6 +37,7 @@
#include <asm/desc.h>
#include <asm/timer.h>
#include <asm/i8259.h>
+#include <asm/nmi.h>
#include <mach_apic.h>
@@ -90,6 +90,7 @@ static struct { int pin, apic; } ioapic_
static struct { int pin, apic; } ioapic_i8259 = { -1, -1 };
static DEFINE_SPINLOCK(ioapic_lock);
+static DEFINE_SPINLOCK(vector_lock);
int timer_over_8254 __initdata = 1;
@@ -310,7 +311,7 @@ static void set_ioapic_affinity_irq(unsi
# include <linux/slab.h> /* kmalloc() */
# include <linux/timer.h> /* time_after() */
-# ifdef CONFIG_BALANCED_IRQ_DEBUG
+#ifdef CONFIG_BALANCED_IRQ_DEBUG
# define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__,
__LINE__); printk(x); } while (0)
# define Dprintk(x...) do { TDprintk(x); } while (0)
# else
@@ -318,10 +319,15 @@ static void set_ioapic_affinity_irq(unsi
# define Dprintk(x...)
# endif
-
#define IRQBALANCE_CHECK_ARCH -999
-static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH;
-static int physical_balance = 0;
+#define MAX_BALANCED_IRQ_INTERVAL (5*HZ)
+#define MIN_BALANCED_IRQ_INTERVAL (HZ/2)
+#define BALANCED_IRQ_MORE_DELTA (HZ/10)
+#define BALANCED_IRQ_LESS_DELTA (HZ)
+
+static int irqbalance_disabled __read_mostly = IRQBALANCE_CHECK_ARCH;
+static int physical_balance __read_mostly;
+static long balanced_irq_interval __read_mostly = MAX_BALANCED_IRQ_INTERVAL;
static struct irq_cpu_info {
unsigned long * last_irq;
@@ -340,12 +346,14 @@ static struct irq_cpu_info {
#define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i]))
-#define MAX_BALANCED_IRQ_INTERVAL (5*HZ)
-#define MIN_BALANCED_IRQ_INTERVAL (HZ/2)
-#define BALANCED_IRQ_MORE_DELTA (HZ/10)
-#define BALANCED_IRQ_LESS_DELTA (HZ)
-
-static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL;
+static cpumask_t balance_irq_affinity[NR_IRQS] = {
+ [0 ... NR_IRQS-1] = CPU_MASK_ALL
+};
+
+void set_balance_irq_affinity(unsigned int irq, cpumask_t mask)
+{
+ balance_irq_affinity[irq] = mask;
+}
static unsigned long move(int curr_cpu, cpumask_t allowed_mask,
unsigned long now, int direction)
@@ -383,7 +391,7 @@ static inline void balance_irq(int cpu,
if (irqbalance_disabled)
return;
- cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]);
+ cpus_and(allowed_mask, cpu_online_map, balance_irq_affinity[irq]);
new_cpu = move(cpu, allowed_mask, now, 1);
if (cpu != new_cpu) {
set_pending_irq(irq, cpumask_of_cpu(new_cpu));
@@ -394,8 +402,8 @@ static inline void rotate_irqs_among_cpu
{
int i, j;
Dprintk("Rotating IRQs among CPUs.\n");
- for (i = 0; i < NR_CPUS; i++) {
- for (j = 0; cpu_online(i) && (j < NR_IRQS); j++) {
+ for_each_online_cpu(i) {
+ for (j = 0; j < NR_IRQS; j++) {
if (!irq_desc[j].action)
continue;
/* Is it a significant load ? */
@@ -424,7 +432,7 @@ static void do_irq_balance(void)
unsigned long imbalance = 0;
cpumask_t allowed_mask, target_cpu_mask, tmp;
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_possible_cpu(i) {
int package_index;
CPU_IRQ(i) = 0;
if (!cpu_online(i))
@@ -465,9 +473,7 @@ static void do_irq_balance(void)
}
}
/* Find the least loaded processor package */
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
if (i != CPU_TO_PACKAGEINDEX(i))
continue;
if (min_cpu_irq > CPU_IRQ(i)) {
@@ -484,9 +490,7 @@ tryanothercpu:
*/
tmp_cpu_irq = 0;
tmp_loaded = -1;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
if (i != CPU_TO_PACKAGEINDEX(i))
continue;
if (max_cpu_irq <= CPU_IRQ(i))
@@ -576,7 +580,9 @@ tryanotherirq:
}
}
- cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]);
+ cpus_and(allowed_mask,
+ cpu_online_map,
+ balance_irq_affinity[selected_irq]);
target_cpu_mask = cpumask_of_cpu(min_loaded);
cpus_and(tmp, target_cpu_mask, allowed_mask);
@@ -617,7 +623,7 @@ static int balanced_irq(void *unused)
/* push everything to CPU 0 to give us a starting point. */
for (i = 0 ; i < NR_IRQS ; i++) {
- pending_irq_cpumask[i] = cpumask_of_cpu(0);
+ irq_desc[i].pending_mask = cpumask_of_cpu(0);
set_pending_irq(i, cpumask_of_cpu(0));
}
@@ -662,9 +668,7 @@ static int __init balanced_irq_init(void
if (smp_num_siblings > 1 && !cpus_empty(tmp))
physical_balance = 1;
- for (i = 0; i < NR_CPUS; i++) {
- if (!cpu_online(i))
- continue;
+ for_each_online_cpu(i) {
irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) *
NR_IRQS, GFP_KERNEL);
irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) *
NR_IRQS, GFP_KERNEL);
if (irq_cpu_data[i].irq_delta == NULL ||
irq_cpu_data[i].last_irq == NULL) {
@@ -681,9 +685,11 @@ static int __init balanced_irq_init(void
else
printk(KERN_ERR "balanced_irq_init: failed to spawn
balanced_irq");
failed:
- for (i = 0; i < NR_CPUS; i++) {
+ for_each_possible_cpu(i) {
kfree(irq_cpu_data[i].irq_delta);
+ irq_cpu_data[i].irq_delta = NULL;
kfree(irq_cpu_data[i].last_irq);
+ irq_cpu_data[i].last_irq = NULL;
}
return 0;
}
@@ -691,7 +697,7 @@ int __init irqbalance_disable(char *str)
int __init irqbalance_disable(char *str)
{
irqbalance_disabled = 1;
- return 0;
+ return 1;
}
__setup("noirqbalance", irqbalance_disable);
@@ -1203,21 +1209,33 @@ u8 irq_vector[NR_IRQ_VECTORS] __read_mos
int assign_irq_vector(int irq)
{
+ unsigned long flags;
+ int vector;
struct physdev_irq irq_op;
- BUG_ON(irq >= NR_IRQ_VECTORS);
- if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0)
+ BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS);
+
+ spin_lock_irqsave(&vector_lock, flags);
+
+ if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) {
+ spin_unlock_irqrestore(&vector_lock, flags);
return IO_APIC_VECTOR(irq);
+ }
irq_op.irq = irq;
- if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op))
+ if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op)) {
+ spin_unlock_irqrestore(&vector_lock, flags);
return -ENOSPC;
-
- vector_irq[irq_op.vector] = irq;
+ }
+
+ vector = irq_op.vector;
+ vector_irq[vector] = irq;
if (irq != AUTO_ASSIGN)
- IO_APIC_VECTOR(irq) = irq_op.vector;
-
- return irq_op.vector;
+ IO_APIC_VECTOR(irq) = vector;
+
+ spin_unlock_irqrestore(&vector_lock, flags);
+
+ return vector;
}
#ifndef CONFIG_XEN
@@ -1228,23 +1246,18 @@ static struct hw_interrupt_type ioapic_e
#define IOAPIC_EDGE 0
#define IOAPIC_LEVEL 1
-static inline void ioapic_register_intr(int irq, int vector, unsigned long
trigger)
-{
- if (use_pci_vector() && !platform_legacy_irq(irq)) {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[vector].handler = &ioapic_level_type;
- else
- irq_desc[vector].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[vector]);
- } else {
- if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
- trigger == IOAPIC_LEVEL)
- irq_desc[irq].handler = &ioapic_level_type;
- else
- irq_desc[irq].handler = &ioapic_edge_type;
- set_intr_gate(vector, interrupt[irq]);
- }
+static void ioapic_register_intr(int irq, int vector, unsigned long trigger)
+{
+ unsigned idx;
+
+ idx = use_pci_vector() && !platform_legacy_irq(irq) ? vector : irq;
+
+ if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) ||
+ trigger == IOAPIC_LEVEL)
+ irq_desc[idx].chip = &ioapic_level_type;
+ else
+ irq_desc[idx].chip = &ioapic_edge_type;
+ set_intr_gate(vector, interrupt[idx]);
}
#else
#define ioapic_register_intr(_irq,_vector,_trigger) ((void)0)
@@ -1359,7 +1372,7 @@ static void __init setup_ExtINT_IRQ0_pin
* The timer IRQ doesn't have to know that behind the
* scene we have a 8259A-master in AEOI mode ...
*/
- irq_desc[0].handler = &ioapic_edge_type;
+ irq_desc[0].chip = &ioapic_edge_type;
/*
* Add it to the IO-APIC irq-routing table:
@@ -1813,7 +1826,8 @@ static void __init setup_ioapic_ids_from
* Don't check I/O APIC IDs for xAPIC systems. They have
* no meaning without the serial APIC bus.
*/
- if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86
< 15))
+ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ || APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
return;
/*
* This is broken; anything with a real cpu count has to
@@ -2109,6 +2123,13 @@ static void set_ioapic_affinity_vector (
#endif
#endif
+static int ioapic_retrigger(unsigned int irq)
+{
+ send_IPI_self(IO_APIC_VECTOR(irq));
+
+ return 1;
+}
+
/*
* Level and edge triggered IO-APIC interrupts need different handling,
* so we use two separate IRQ descriptors. Edge triggered IRQs can be
@@ -2128,6 +2149,7 @@ static struct hw_interrupt_type ioapic_e
#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
#endif
+ .retrigger = ioapic_retrigger,
};
static struct hw_interrupt_type ioapic_level_type __read_mostly = {
@@ -2141,6 +2163,7 @@ static struct hw_interrupt_type ioapic_l
#ifdef CONFIG_SMP
.set_affinity = set_ioapic_affinity,
#endif
+ .retrigger = ioapic_retrigger,
};
#endif /* !CONFIG_XEN */
@@ -2177,7 +2200,7 @@ static inline void init_IO_APIC_traps(vo
#ifndef CONFIG_XEN
else
/* Strange. Oh, well.. */
- irq_desc[irq].handler = &no_irq_type;
+ irq_desc[irq].chip = &no_irq_type;
#endif
}
}
@@ -2298,6 +2321,8 @@ static inline void unlock_ExtINT_logic(v
spin_unlock_irqrestore(&ioapic_lock, flags);
}
+int timer_uses_ioapic_pin_0;
+
/*
* This code may look a bit paranoid, but it's supposed to cooperate with
* a wide range of boards and BIOS bugs. Fortunately only the timer IRQ
@@ -2333,6 +2358,9 @@ static inline void check_timer(void)
apic1 = find_isa_irq_apic(0, mp_INT);
pin2 = ioapic_i8259.pin;
apic2 = ioapic_i8259.apic;
+
+ if (pin1 == 0)
+ timer_uses_ioapic_pin_0 = 1;
printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d
pin2=%d\n",
vector, apic1, pin1, apic2, pin2);
@@ -2390,7 +2418,7 @@ static inline void check_timer(void)
printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
disable_8259A_irq(0);
- irq_desc[0].handler = &lapic_irq_type;
+ irq_desc[0].chip = &lapic_irq_type;
apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */
enable_8259A_irq(0);
@@ -2419,6 +2447,7 @@ static inline void check_timer(void)
"report. Then try booting with the 'noapic' option");
}
#else
+int timer_uses_ioapic_pin_0 = 0;
#define check_timer() ((void)0)
#endif
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/ioport-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -79,6 +79,7 @@ asmlinkage long sys_ioperm(unsigned long
memset(bitmap, 0xff, IO_BITMAP_BYTES);
t->io_bitmap_ptr = bitmap;
+ set_thread_flag(TIF_IO_BITMAP);
set_iobitmap.bitmap = (char *)bitmap;
set_iobitmap.nr_ports = IO_BITMAP_BITS;
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c Fri Jan 26 14:19:37
2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/irq-xen.c Sat Jan 27 14:07:19
2007 -0700
@@ -42,8 +42,8 @@ union irq_ctx {
u32 stack[THREAD_SIZE/sizeof(u32)];
};
-static union irq_ctx *hardirq_ctx[NR_CPUS];
-static union irq_ctx *softirq_ctx[NR_CPUS];
+static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
+static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
#endif
/*
@@ -59,6 +59,12 @@ fastcall unsigned int do_IRQ(struct pt_r
union irq_ctx *curctx, *irqctx;
u32 *isp;
#endif
+
+ if (unlikely((unsigned)irq >= NR_IRQS)) {
+ printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
+ __FUNCTION__, irq);
+ BUG();
+ }
irq_enter();
#ifdef CONFIG_DEBUG_STACKOVERFLOW
@@ -94,6 +100,14 @@ fastcall unsigned int do_IRQ(struct pt_r
isp = (u32*) ((char*)irqctx + sizeof(*irqctx));
irqctx->tinfo.task = curctx->tinfo.task;
irqctx->tinfo.previous_esp = current_stack_pointer;
+
+ /*
+ * Copy the softirq bits in preempt_count so that the
+ * softirq checks work in the hardirq context.
+ */
+ irqctx->tinfo.preempt_count =
+ (irqctx->tinfo.preempt_count & ~SOFTIRQ_MASK) |
+ (curctx->tinfo.preempt_count & SOFTIRQ_MASK);
asm volatile(
" xchgl %%ebx,%%esp \n"
@@ -147,7 +161,7 @@ void irq_ctx_init(int cpu)
irqctx->tinfo.task = NULL;
irqctx->tinfo.exec_domain = NULL;
irqctx->tinfo.cpu = cpu;
- irqctx->tinfo.preempt_count = SOFTIRQ_OFFSET;
+ irqctx->tinfo.preempt_count = 0;
irqctx->tinfo.addr_limit = MAKE_MM_SEG(0);
softirq_ctx[cpu] = irqctx;
@@ -192,6 +206,10 @@ asmlinkage void do_softirq(void)
: "0"(isp)
: "memory", "cc", "edx", "ecx", "eax"
);
+ /*
+ * Shouldnt happen, we returned above if in_interrupt():
+ */
+ WARN_ON_ONCE(softirq_count());
}
local_irq_restore(flags);
@@ -219,7 +237,7 @@ int show_interrupts(struct seq_file *p,
if (i == 0) {
seq_printf(p, " ");
for_each_online_cpu(j)
- seq_printf(p, "CPU%d ",j);
+ seq_printf(p, "CPU%-8d",j);
seq_putc(p, '\n');
}
@@ -235,7 +253,7 @@ int show_interrupts(struct seq_file *p,
for_each_online_cpu(j)
seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]);
#endif
- seq_printf(p, " %14s", irq_desc[i].handler->typename);
+ seq_printf(p, " %14s", irq_desc[i].chip->typename);
seq_printf(p, " %s", action->name);
for (action=action->next; action; action = action->next)
@@ -276,13 +294,13 @@ void fixup_irqs(cpumask_t map)
if (irq == 2)
continue;
- cpus_and(mask, irq_affinity[irq], map);
+ cpus_and(mask, irq_desc[irq].affinity, map);
if (any_online_cpu(mask) == NR_CPUS) {
/*printk("Breaking affinity for irq %i\n", irq);*/
mask = map;
}
- if (irq_desc[irq].handler->set_affinity)
- irq_desc[irq].handler->set_affinity(irq, mask);
+ if (irq_desc[irq].chip->set_affinity)
+ irq_desc[irq].chip->set_affinity(irq, mask);
else if (irq_desc[irq].action && !(warned++))
printk("Cannot set affinity for irq %i\n", irq);
}
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/microcode-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/microcode-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/microcode-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -32,6 +32,7 @@
#include <linux/miscdevice.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
+#include <linux/mutex.h>
#include <linux/syscalls.h>
#include <asm/msr.h>
@@ -42,14 +43,17 @@ MODULE_AUTHOR("Tigran Aivazian <tigran@v
MODULE_AUTHOR("Tigran Aivazian <tigran@xxxxxxxxxxx>");
MODULE_LICENSE("GPL");
-#define MICROCODE_VERSION "1.14-xen"
+static int verbose;
+module_param(verbose, int, 0644);
+
+#define MICROCODE_VERSION "1.14a-xen"
#define DEFAULT_UCODE_DATASIZE (2000) /* 2000 bytes */
#define MC_HEADER_SIZE (sizeof (microcode_header_t)) /* 48 bytes */
#define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE) /*
2048 bytes */
/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
-static DECLARE_MUTEX(microcode_sem);
+static DEFINE_MUTEX(microcode_mutex);
static int microcode_open (struct inode *unused1, struct file *unused2)
{
@@ -90,44 +94,26 @@ static ssize_t microcode_write (struct f
return -EINVAL;
}
- down(µcode_sem);
+ mutex_lock(µcode_mutex);
ret = do_microcode_update(buf, len);
if (!ret)
ret = (ssize_t)len;
- up(µcode_sem);
+ mutex_unlock(µcode_mutex);
return ret;
-}
-
-static int microcode_ioctl (struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- switch (cmd) {
- /*
- * XXX: will be removed after microcode_ctl
- * is updated to ignore failure of this ioctl()
- */
- case MICROCODE_IOCFREE:
- return 0;
- default:
- return -EINVAL;
- }
- return -EINVAL;
}
static struct file_operations microcode_fops = {
.owner = THIS_MODULE,
.write = microcode_write,
- .ioctl = microcode_ioctl,
.open = microcode_open,
};
static struct miscdevice microcode_dev = {
.minor = MICROCODE_MINOR,
.name = "microcode",
- .devfs_name = "cpu/microcode",
.fops = µcode_fops,
};
@@ -151,7 +137,6 @@ static void __exit microcode_exit (void)
static void __exit microcode_exit (void)
{
misc_deregister(µcode_dev);
- printk(KERN_INFO "IA-32 Microcode Update Driver v" MICROCODE_VERSION "
unregistered\n");
}
module_init(microcode_init)
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/mpparse-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -17,7 +17,6 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/delay.h>
-#include <linux/config.h>
#include <linux/bootmem.h>
#include <linux/smp_lock.h>
#include <linux/kernel_stat.h>
@@ -37,12 +36,6 @@
/* Have we found an MP table */
int smp_found_config;
unsigned int __initdata maxcpus = NR_CPUS;
-
-#ifdef CONFIG_HOTPLUG_CPU
-#define CPU_HOTPLUG_ENABLED (1)
-#else
-#define CPU_HOTPLUG_ENABLED (0)
-#endif
/*
* Various Linux-internal data structures created from the
@@ -109,21 +102,6 @@ static int __init mpf_checksum(unsigned
static int mpc_record;
static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
__initdata;
-
-#ifdef CONFIG_X86_NUMAQ
-static int MP_valid_apicid(int apicid, int version)
-{
- return hweight_long(apicid & 0xf) == 1 && (apicid >> 4) != 0xf;
-}
-#elif !defined(CONFIG_XEN)
-static int MP_valid_apicid(int apicid, int version)
-{
- if (version >= 0x14)
- return apicid < 0xff;
- else
- return apicid < 0xf;
-}
-#endif
#ifndef CONFIG_XEN
static void __devinit MP_processor_info (struct mpc_config_processor *m)
@@ -191,12 +169,6 @@ static void __devinit MP_processor_info
ver = m->mpc_apicver;
- if (!MP_valid_apicid(apicid, ver)) {
- printk(KERN_WARNING "Processor #%d INVALID. (Max ID: %d).\n",
- m->mpc_apicid, MAX_APICS);
- return;
- }
-
/*
* Validate version
*/
@@ -226,7 +198,14 @@ static void __devinit MP_processor_info
cpu_set(num_processors, cpu_possible_map);
num_processors++;
- if (CPU_HOTPLUG_ENABLED || (num_processors > 8)) {
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@xxxxxxxxx>
+ */
+ if (num_processors > 8) {
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_INTEL:
if (!APIC_XAPIC(ver)) {
@@ -255,6 +234,13 @@ static void __init MP_bus_info (struct m
str[6] = 0;
mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+
+ if (m->mpc_busid >= MAX_MP_BUSSES) {
+ printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
+ " is too large, max. supported is %d\n",
+ m->mpc_busid, str, MAX_MP_BUSSES - 1);
+ return;
+ }
if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
@@ -844,6 +830,8 @@ void __init find_smp_config (void)
#endif
}
+int es7000_plat;
+
/* --------------------------------------------------------------------------
ACPI-based MP Configuration
--------------------------------------------------------------------------
*/
@@ -957,7 +945,8 @@ void __init mp_register_ioapic (
#ifndef CONFIG_XEN
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
#endif
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
(boot_cpu_data.x86 < 15))
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
tmpid = io_apic_get_unique_id(idx, id);
else
tmpid = id;
@@ -1033,8 +1022,6 @@ void __init mp_override_legacy_irq (
return;
}
-int es7000_plat;
-
void __init mp_config_acpi_legacy_irqs (void)
{
struct mpc_config_intsrc intsrc;
@@ -1164,7 +1151,17 @@ int mp_register_gsi (u32 gsi, int trigge
*/
int irq = gsi;
if (gsi < MAX_GSI_NUM) {
- if (gsi > 15)
+ /*
+ * Retain the VIA chipset work-around (gsi > 15), but
+ * avoid a problem where the 8254 timer (IRQ0) is setup
+ * via an override (so it's not on pin 0 of the ioapic),
+ * and at the same time, the pin 0 interrupt is a PCI
+ * type. The gsi > 15 test could cause these two pins
+ * to be shared as IRQ0, and they are not shareable.
+ * So test for this condition, and if necessary, avoid
+ * the pin collision.
+ */
+ if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
gsi = pci_irq++;
/*
* Don't assign IRQ used by ACPI SCI
diff -r 1faf482f119c -r 140afd7a5462
linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c
--- a/linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c Fri Jan 26
14:19:37 2007 -0700
+++ b/linux-2.6-xen-sparse/arch/i386/kernel/pci-dma-xen.c Sat Jan 27
14:07:19 2007 -0700
@@ -21,6 +21,8 @@
#include <asm/bug.h>
#ifdef __x86_64__
+#include <asm/proto.h>
+
int iommu_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_merge);
@@ -32,10 +34,28 @@ int iommu_bio_merge __read_mostly = 0;
int iommu_bio_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_bio_merge);
+int force_iommu __read_mostly= 0;
+
__init int iommu_setup(char *p)
{
return 1;
}
+
+void __init pci_iommu_alloc(void)
+{
+#ifdef CONFIG_SWIOTLB
+ pci_swiotlb_init();
+#endif
+}
+
+static int __init pci_iommu_init(void)
_______________________________________________
Xen-changelog mailing list
Xen-changelog@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-changelog
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |